High Classification Rate Research Articles

Exploring the therapeutic potential of layered double hydroxides and transition metal dichalcogenides through the convergence of rheumatology and nanotechnology using generative adversarial network

Two-dimensional Layered double hydroxides (LDHs) are highly used in the biomedical domain due to their biocompatibility, biodegradability, controlled drug loading and release capabilities, and improved cellular permeability. The interaction of LDHs with biological systems could facilitate targeted drug delivery and make them an attractive option for various biomedical applications. Rheumatoid Arthritis (RA) requires targeted drug delivery for optimum therapeutic outcomes. In this study, stacked double hydroxide nanocomposites with dextran sulphate modification (LDH-DS) were developed while exhibiting both targeting and pH-sensitivity for rheumatological conditions. This research examines the loading, release kinetics, and efficiency of the therapeutics of interest in the LDH-based drug delivery system. The mean size of LDH-DS particles (300.1 ± 8.12 nm) is −12.11 ± 0.4 mV. The encapsulation efficiency was 48.52%, and the loading efficacy was 16.81%. In vitro release tests indicate that the drug's discharge is modified more rapidly in PBS at pH 5.4 compared to pH 5.6, which later reached 7.3, showing the case sensitivity to pH. A generative adversarial network (GAN) is used to analyze the drug delivery system in rheumatology. The GAN model achieved high accuracy and classification rates of 99.3% and 99.0%, respectively, and a validity of 99.5%. The second and third administrations resulted in a significant change with p-values of 0.001 and 0.05, respectively. This investigation unequivocally demonstrated that LDH functions as a biocompatible drug delivery matrix, significantly improving delivery effectiveness.

Pipelined deep learning architecture for the detection of Alzheimer’s disease

The progressive neurodegenerative disease in the human brain causes Alzheimer's disease (AD).The earlier detection helps to slowdown the progression of AD using continuous medical support system. The research work aims in the detection of Alzheimer’s disease (AD) using brain images. The AD images are detected using fusion-based deep learning method. This works also adopts Pipelined LeNet (PLN) architecture. The brain Magnetic Resonance Imaging (MRI) images obtained are resized in the preprocessing stage and the internal regions are enhanced using the image fusion method. Therefore, the proposed AD detection system produces high classification rate even using low resolution brain MRI images. The ternary features are computed from the fused image and these features are classified by the proposed PLN architecture for identification of Alzheimer’s brain image. High efficient and high speed novel PLN architecture is proposed in this AD detection system using brain MRI images due to the consumption time of classification and requirement of brain image dataset by conventional methods. Evaluation of the work is carried out using Kaggle Alzheimer’s Classification Dataset (KACD). Performance of the AD image detection system in terms of sensitivity (Se), specificity (Sp), precision (Pr), and accuracy (Acc) are evaluated. The proposed AD image detection system obtains 99.9% Se, 99.8% Sp, 99.8% Pr and 99.5% Acc using PLN architecture. The proposed AD detection system using PLN architecture consumed 0.65 ms as an average execution span. By comparing the execution span of all other similar methods, the proposed system consumes less execution span due to its Pipelined architecture. The experimental results of the image detection system are compared with similar works in the literatures.

New Proposed Mixed Transforms: CAW and FAW and Their Application in Medical Image Classification

The transformation model plays a vital role in medical image processing. This paper proposed new two Mixed Transforms models that are the hybrid combination of linear and nonlinear Transformations techniques. The first mixed transform is computed in three steps: calculate 2D discrete cosine transform (DCT) of the image, and applying Arnold Transform (AT) on the DCT coefficients, and applying the discrete Wavelet Transform (DWT) on the result to get which was abbreviated as (CAW). The second mixed transform consists of firstly computing the discrete Fourier transform (DFT), net applying the Arnold Transform (AT), and finally, the computation of discrete Wavelet Transform (DWT) which was abbreviated as (FAW). These transforms have superior directional representations as compared to other multiresolution representations such as DWT or DCT and work as non-adaptive mixed transformations for multi-scale object analysis. Due to their relationship to the wavelet idea, they are finding increasing use in areas like image processing and scientific computing. These transforms are tested in medical image classification task and their performances are compared with that of the traditional transforms. CAW and FAW transforms are used in the feature extraction stage of a classification VGG16 deep learning (DNN) task of Tumor MRI medical image. The numerical findings favor CAW and FAW over the wavelet transform for estimating and classifying pictures. From the results obtained it was shown that the CAW and FAW transform gave e much higher classification rate than that achieved with the traditional transforms, namely DCT, DFT and DWT. Furthermore, this combination leads to a family of directional and multi-transformation bases for image processing.

Quantification and Detection of Ground Garlic Adulteration Using Fourier-Transform Near-Infrared Reflectance Spectra.

This study demonstrates the rapid and cost-effective possibility of quantifying adulterant amounts (corn flour or corn starch) in ground and dried garlic samples. Prepared mixtures with different concentrations of selected adulterant were effectively characterized using Fourier-transform near-infrared reflectance spectra (FT-NIR), and multivariate calibration models were developed using two methods: principal component regression (PCR) and partial least squares regression (PLSR). They were constructed for optimally preprocessed FT-NIR spectra, and PLSR models generally performed better regarding model fit and predictions than PCR. The optimal PLSR model, built to estimate the amount of corn flour present in the ground and dried garlic samples, was constructed for the first derivative spectra obtained after Savitzky-Golay smoothing (fifteen sampling points and polynomial of the second degree). It demonstrated root mean squared errors for calibration and validation samples equal to 1.8841 and 1.8844 (i.e., 1.88% concerning the calibration range), respectively, and coefficients of determination equal to 0.9955 and 0.9858. The optimal PLSR model constructed for spectra after inverse scattering correction to assess the amount of corn starch had root mean squared errors for calibration and validation samples equal to 1.7679 and 1.7812 (i.e., 1.77% and 1.78% concerning the calibration range), respectively, and coefficients of determination equal to 0.9961 and 0.9873. It was also possible to discriminate samples adulterated with corn flour or corn starch using partial least squares discriminant analysis (PLS-DA). The optimal PLS-DA model had a very high correct classification rate (99.66%), sensitivity (99.96%), and specificity (99.36%), calculated for external validation samples. Uncertainties of these figures of merit, estimated using the Monte Carlo validation approach, were relatively small. One-class classification partial least squares models, developed to detect the adulterant type, presented very optimistic sensitivity for validation samples (above 99%) but low specificity (64% and 45.33% for models recognizing corn flour or corn starch adulterants, respectively). Through experimental investigation, chemometric data analysis, and modeling, we have verified that the FT-NIR technique exhibits the required sensitivity to quantify adulteration in dried ground garlic, whether it involves corn flour or corn starch.

The Visibility of Changes in the Antioxidant Compound Profiles of Strawberry and Raspberry Fruits Subjected to Different Storage Conditions Using ATR-FTIR and Chemometrics.

Strawberry cultivars Portola and Enduro, as well as raspberry cultivars Enrosadira and Kwazi, were evaluated for their antioxidant potential after treatment with gaseous ozone and different refrigeration storage conditions. Their antioxidant capacity was investigated with ABTS and DPPH methods, and the chemical composition was determined by measuring the total phenolic (TPC) and flavonoid (TFC) compounds. The classification of different samples of berry puree was influenced significantly by both the cultivars and the refrigeration storage method. Moreover, FTIR spectroscopy coupled with chemometrics was used as an alternative technique to conventional methods to determine the chemical composition of strawberries and raspberries. The chemometric discrimination of samples was achieved using principal component analysis (PCA), hierarchical clustering analysis (HCA) and linear discriminant analysis (LDA) modelling procedures performed on the FTIR preprocessed spectral data for the fingerprint region (1800-500 cm-1). The fingerprint range between 1500 and 500 cm-1, corresponding to deformation vibrations from polysaccharides, pectin and organic acid content, had a significant impact on the grouping of samples. The results obtained by PCA-LDA scores revealed a clear separation between four classes of samples and demonstrated a high overall classification rate of 97.5% in differentiating between the raspberry and strawberry cultivars.

A study on comparing method of motion classification using muscle bulging for control of powered prosthetic hand

AbstractAiming at the control of a powered prosthetic hand, this paper compares methods for the classification of intended hand motions using muscle bulging patterns caused by muscle contraction. Two sheets of Polyvinylidene Difluoride (PVDF) film were used as sensors to detect the muscle bulging on the forearm caused by intended hand motions. A neural network had been successfully trained for the classification of six types of hand motions using the muscle bulging pattern detected by the two PVDF sensors. In this paper, we further studied the motion classification methods of back propagation neural network (BPNN), k‐nearest neighbor algorithm (k‐NN), and support vector machine (SVM) to compare their classification performance. We found that all three methods had a similar classification rate of about 95% for six types of hand motions. Moreover, a regressive analysis comparison of the time for each classification method to converge to 95% of the total classification rate showed that SVM converged significantly earlier than BPNN and k‐NN. The time it takes for SVM to converge the classification rate to 95% is less than 0.1 s, suggesting that real‐time motion classification is possible by using SVM. In a similar manner, we found that SVM requires the least training data of the three methods at only nine trials for a type of motion. Furthermore, SVM had the highest classification rate at about 90% in practical experimental conditions. In conclusion, SVM was found to be the most practical of the three methods.

Statistical comparison of predictive models for quantitative analysis and classification in the framework of LIBS spectroscopy: A tutorial

Laser-Induced Breakdown Spectroscopy (LIBS) is a widely accepted technique used for both classification and quantification purposes considering complex and heterogeous samples. Based on a set of training spectra acquired from diverse and representative samples within a specific application domain, it becomes possible to apply various data processing techniques and modeling methods to construct the predictive model in question. Naturally the complexity of both the laser-matter and the laser-plasma interactions and the heterogeneity of natural samples often requires the development of various predictive models, which are then compared based on figures of merit such as the RMSEP (Root Mean Square Error of Prediction) value for quantification or the classification rate for qualitative analysis. Our ultimate goal is, of course, to select the model that appears to be the most accurate, which ultimately boils down to searching for the lowest RMSEP value or the highest classification rate. This is precisely where the whole problem lies because even if we observe a different level of error for two models, for example, this difference is not necessarily statistically significant. In such a case, we are therefore not allowed to say that the lower error indicates the best predictive model to consider. The purpose of this article is to provide a tutorial on introducing a statistical model comparison procedure, whether they are quantitative or qualitative. Two LIBS data sets have been used to illustrate the principles of the proposed method.

Random forest classification for volcanogenic massive sulfide mineralization in the Rouyn-Noranda Area, Quebec

Random forest (RF) classification was applied to 37 predictor maps (vectors to mineralization) producing a Mineral Prospectivity Map (MPM) for volcanogenic massive sulfide (VMS) mineralization in the Noranda District, Abitibi subprovince, which is host to ∼ 20 VMS deposits and numerous subeconomic occurrences. The predictor maps were created using geological, geochemical, and geophysical data, and the known VMS deposits were used to train the RF classifier. The RF model was applied on two regions of interest (ROI) to investigate the effect of different sized ROIs on the results. Five sets of balanced and unbalanced training data were used in the experiments to examine the sensitivity of RF to different sets of training data. The probability/prospectivity maps showed very high success rate of classification with regard to training data particularly for the training sets with higher ratio of non-deposits/deposits. Accuracy assessment of classification maps using cross-validation also showed very high accuracy when assessed by the training data in all experiments again giving a higher accuracy for the training sets with higher ratios of non-deposits/deposits, however the later showed very low accuracy when applying k-fold cross-validation or when assessed by 15 VMS showings used as the test data indicating an overfitting problem with the unbalanced data. In most of the experiments, principal component 4 (PC4) of geochemical analysis, proximity to synvolcanic tonalite-trondhjemite-granodiorite (TTG) intrusions, lithology, and sericite alteration maps showed higher predictive power. The importance of individual variables changed when the ROI was changed to a smaller area suggesting that RF is sensitive to the study area.

Online Outdoor Terrain Classification Algorithm for Wheeled Mobile Robots Equipped with Inertial and Magnetic Sensors

Terrain classification provides valuable information for both control and navigation algorithms of wheeled mobile robots. In this paper, a novel online outdoor terrain classification algorithm is proposed for wheeled mobile robots. The algorithm is based on only time-domain features with both low computational and low memory requirements, which are extracted from the inertial and magnetic sensor signals. Multilayer perceptron (MLP) neural networks are applied as classifiers. The algorithm is tested on a measurement database collected using a prototype measurement system for various outdoor terrain types. Different datasets were constructed based on various setups of processing window sizes, used sensor types, and robot speeds. To examine the possibilities of the three applied sensor types in the application, the features extracted from the measurement data of the different sensors were tested alone, in pairs and fused together. The algorithm is suitable to operate online on the embedded system of the mobile robot. The achieved results show that using the applied time-domain feature set the highest classification efficiencies on unknown data can be above 98%. It is also shown that the gyroscope provides higher classification rates than the widely used accelerometer. The magnetic sensor alone cannot be effectively used but fusing the data of this sensor with the data of the inertial sensors can improve the performance.

An intelligent network monitoring approach for online classification of Darknet traffic

The Internet plays a crucial role in supporting global applications and businesses, but security remains a major challenge. Within the Internet, there exists a parallel network known as the Darknet, where malicious activities and traffic are present and require real-time classification. Many methods aim to classify this Darknet traffic in real-time due to its significant volume within Internet traffic. However, online Darknet traffic classification faces challenges, particularly in determining the optimal packet sampling amount for achieving a high classification rate in high-performance networks. To address this, our paper presents a novel approach that combines Convolutional Neural Network (CNN) and Reinforcement Learning (RL) techniques for intelligent and adaptive packet sampling rates in high-performance network interfaces. This method reduces overhead on monitored entities, especially in high-speed networks with a high bit rate. Our findings demonstrate a TOR traffic prediction accuracy of 99.84% and successful classification tasks in high-throughput networks using our method.

Dependent Personality Disorder: An Approach Based on fMRI

Background: Dependent Personality Disorder (DPD) is one of the most frequent diagnosed personality disorders. People with DPD become over-dependent on other people and unable to make even everyday decisions. Objective: To detect the neuron network and activation in Brodmann areas (BA 10, BA 11, & BA 47) of the human brain by using Functional Magnetic Resonance Imaging (fMRI) and to identify voxels used in decision making process. Material and Methods: It is an experimental study conducted on a single subject under a controlled observed environment using Functional Magnetic Resonance Imaging (fMRI). The respondent selected was performing a task based on two visual conditions in which two different types of images (easy and hard birds) were displayed to the respondent. The subject was asked for identification of the particular bird image to visualize voxels used in decision making process. Three Brodmann areas (BA 10, BA 11, & BA 47) from prefrontal cortex were selected as a region of interest. The current study analyzed activated brain regions during making ordinary decisions related to two visual conditions. A multivariate technique Multilayer Perceptron (MLP) neural network was applied for the categorization of two ordinary decisions made by respondent while performing visual task. Results: The experimental results show the high classification accuracy 92.9% for ordinary decisions between two visual conditions. Sensitivity and specificity of MLP neural network is represented by ROC curve. The MLP neural network technique also detected some important voxels of Brodmann areas 10, 11 and 47 in prefrontal cortex of brain, which engaged in primary role of ordinary decision making process. The current study tracked down the area of that particular prevailing voxels in prefrontal cortex of brain in context of MNI coordinates. Conclusion: In conclusion, the MLP neural network proficiently classified the voxels which were activated in decision making and provided high classification rates. It also identified significant voxels helping a person in ordinary decision making. The locations of that particular voxels were found in context of MNI coordinates. This study can be helpful in the treatment of patients with DPD by combination of medication and psychotherapy. Advances in Knowledge: This paper explains precise location of dominant voxels discovered in decision making process which can be used in treatment methods among dependent personality disorder patients. At present, the treatment options are limited, and this paper will give psychiatrists and psychologists the knowledge they need to advance their combination therapies.

The Impact of Image Enhancement and Transfer Learning Techniques on Marine Habitat Mapping

Marine habitat mapping is primarily done to monitor and preserve underwater ecosystems. Images captured in a marine environment suffer from acidification, pollutions, waste chemicals, and lighting conditions. Human beings are progressing fast in terms of technology and are also responsible for the degradations of ecosystems, both marine and land habitats. Marine biologists possess a lot of data for the underwater environment, but it is hard to analyze, and the task becomes tiresome. Automating this process would help marine biologists quickly monitor the environment and preserve it. Our research focuses on coral reef classification and two critical aspects, i.e., Image enhancement and recognition of coral reefs. Image enhancement plays an essential role in marine habitat mapping because of the environment in which images are taken. The literature contains many image enhancement techniques for underwater. The authors want to determine whether a single image enhancement technique is suitable for coral reefs. Four image enhancement techniques based on an extensive literature review are selected. We have used DenseNet-169 and MobileNet for image classification. It has been reported that DenseNet-169 has excellent results for coral reefs classification. Histogram techniques combined with DenseNet-169 for classification resulted in higher classification rates.

STEP TOWARDS INTELLIGENT TRANSPORTATION SYSTEM WITH VEHICLE CLASSIFICATION AND RECOGNITION USING SPEEDED-UP ROBUST FEATURES

<p>Vehicle classification is a crucial task owing to vehicles' diverse and intricate features, such as edges, colors, shadows, corners, and textures. The accurate classification of vehicles enables their detection and identification on roads and facilitates the development of an electronic tollcollection system for smart cities. Furthermore, vehicle classification is useful for traffic signal control strategy. However, achieving accurate vehicle classification poses significant challenges due to the limited processing time for real-time applications, image resolution, illumination variations in the video, and other interferences. This study proposes a method for automated automobile detection, recognition, and classification using statistics derived from approximately 11,000 images. We employ SURF-based detection and different classifiers to categorize vehicles into three groups. The Traffic Management System (TMS) is crucial for studying mobility and smart cities. Our study achieves a high automobile classification rate of 91% with the medium Gaussian Support Vector Machine (SVM) classifier. The paper's main objective is to analyze five object classifiers for vehicle recognition: Decision Tree, Discriminant Analysis, SVM, K-Nearest Neighbor Classifier (KNN), and Ensemble Classifier. In the discussion section, we present the limitations of our work and provide insights into future research directions.</p>

OptEF-BCI: An Optimization-Based Hybrid EEG and fNIRS-Brain Computer Interface.

Multimodal data fusion (electroencephalography (EEG) and functional near-infrared spectroscopy (fNIRS)) has been developed as an important neuroimaging research field in order to circumvent the inherent limitations of individual modalities by combining complementary information from other modalities. This study employed an optimization-based feature selection algorithm to systematically investigate the complementary nature of multimodal fused features. After preprocessing the acquired data of both modalities (i.e., EEG and fNIRS), the temporal statistical features were computed separately with a 10 s interval for each modality. The computed features were fused to create a training vector. A wrapper-based binary enhanced whale optimization algorithm (E-WOA) was used to select the optimal/efficient fused feature subset using the support-vector-machine-based cost function. An online dataset of 29 healthy individuals was used to evaluate the performance of the proposed methodology. The findings suggest that the proposed approach enhances the classification performance by evaluating the degree of complementarity between characteristics and selecting the most efficient fused subset. The binary E-WOA feature selection approach showed a high classification rate (94.22 ± 5.39%). The classification performance exhibited a 3.85% increase compared with the conventional whale optimization algorithm. The proposed hybrid classification framework outperformed both the individual modalities and traditional feature selection classification (p < 0.01). These findings indicate the potential efficacy of the proposed framework for several neuroclinical applications.

Evaluation of Stem Rust Disease in Wheat Fields by Drone Hyperspectral Imaging.

Detecting plant disease severity could help growers and researchers study how the disease impacts cereal crops to make timely decisions. Advanced technology is needed to protect cereals that feed the increasing population using fewer chemicals; this may lead to reduced labor usage and cost in the field. Accurate detection of wheat stem rust, an emerging threat to wheat production, could inform growers to make management decisions and assist plant breeders in making line selections. A hyperspectral camera mounted on an unmanned aerial vehicle (UAV) was utilized in this study to evaluate the severity of wheat stem rust disease in a disease trial containing 960 plots. Quadratic discriminant analysis (QDA) and random forest classifier (RFC), decision tree classification, and support vector machine (SVM) were applied to select the wavelengths and spectral vegetation indices (SVIs). The trial plots were divided into four levels based on ground truth disease severities: class 0 (healthy, severity 0), class 1 (mildly diseased, severity 1-15), class 2 (moderately diseased, severity 16-34), and class 3 (severely diseased, highest severity observed). The RFC method achieved the highest overall classification accuracy (85%). For the spectral vegetation indices (SVIs), the highest classification rate was recorded by RFC, and the accuracy was 76%. The Green NDVI (GNDVI), Photochemical Reflectance Index (PRI), Red-Edge Vegetation Stress Index (RVS1), and Chlorophyll Green (Chl green) were selected from 14 SVIs. In addition, binary classification of mildly diseased vs. non-diseased was also conducted using the classifiers and achieved 88% classification accuracy. This highlighted that hyperspectral imaging was sensitive enough to discriminate between low levels of stem rust disease vs. no disease. The results of this study demonstrated that drone hyperspectral imaging can discriminate stem rust disease levels so that breeders can select disease-resistant varieties more efficiently. The detection of low disease severity capability of drone hyperspectral imaging can help farmers identify early disease outbreaks and enable more timely management of their fields. Based on this study, it is also possible to build a new inexpensive multispectral sensor to diagnose wheat stem rust disease accurately.

Classification of Codling Moth-Infested Apples Using Sensor Data Fusion of Acoustic and Hyperspectral Features Coupled with Machine Learning

Codling moth (CM) is a major apple pest. Current manual method of detection is not very effective. The development of nondestructive monitoring and detection methods has the potential to reduce postharvest losses from CM infestation. Previous work from our group demonstrated the effectiveness of hyperspectral imaging (HSI) and acoustic methods as suitable techniques for nondestructive CM infestation detection and classification in apples. However, both have limitations that can be addressed by the strengths of the other. For example, acoustic methods are incapable of detecting external CM symptoms but can determine internal pest activities and morphological damage, whereas HSI is only capable of detecting the changes and damage to apple surfaces and up to a few mm inward; it cannot detect live CM activity in apples. This study investigated the possibility of sensor data fusion from HSI and acoustic signals to improve the detection of CM infestation in apples. The time and frequency domain acoustic features were combined with the spectral features obtained from the HSI, and various classification models were applied. The results showed that sensor data fusion using selected combined features (mid-level) from the sensor data and three apple varieties gave a high classification rate in terms of performance and reduced the model complexity with an accuracy up to 94% using the AdaBoost classifier, when only six acoustic and six HSI features were applied. This result affirms that the sensor fusion technique can improve CM infestation detection in pome fruits such as apples.

Human activity recognition using visibility graph features coupled with machine learning algorithm

Human activities refer to the actions and behaviors of human beings. These activities can be physical, such as working, playing sports, or playing sports; or mentally, such as learning, problem-solving, or decision-making. Technical development and the emergence of mobile devices such as phones and smart watches, as well as wearable sensors, led to the emergence of many systems to recognize and classify human activities. These systems were developed using the data collected by these devices from a variety of individuals who volunteered to do several activities, such as downstairs, upstairs, sitting, running, standing, and more. Using the WISDM (Wireless Sensor Data Mining) dataset, a new machine learning model is proposed to recognize six different human activities: walking, jogging, going up stairs, going down stairs, sitting, and standing. For signal segmentation, the sliding window technique was used, along with two visibility graph techniques for feature extraction: mean degree and Jaccard coefficient. The Least-Squares Support Vector Machines (LS-SVM) used to classify these activities This model achieves 94% accuracy, demonstrating that the proposed model has a high classification rate.

Metaheuristic Optimization-Based Feature Selection for Imagery and Arithmetic Tasks: An fNIRS Study.

In recent decades, the brain-computer interface (BCI) has emerged as a leading area of research. The feature selection is vital to reduce the dataset's dimensionality, increase the computing effectiveness, and enhance the BCI's performance. Using activity-related features leads to a high classification rate among the desired tasks. This study presents a wrapper-based metaheuristic feature selection framework for BCI applications using functional near-infrared spectroscopy (fNIRS). Here, the temporal statistical features (i.e., the mean, slope, maximum, skewness, and kurtosis) were computed from all the available channels to form a training vector. Seven metaheuristic optimization algorithms were tested for their classification performance using a k-nearest neighbor-based cost function: particle swarm optimization, cuckoo search optimization, the firefly algorithm, the bat algorithm, flower pollination optimization, whale optimization, and grey wolf optimization (GWO). The presented approach was validated based on an available online dataset of motor imagery (MI) and mental arithmetic (MA) tasks from 29 healthy subjects. The results showed that the classification accuracy was significantly improved by utilizing the features selected from the metaheuristic optimization algorithms relative to those obtained from the full set of features. All of the abovementioned metaheuristic algorithms improved the classification accuracy and reduced the feature vector size. The GWO yielded the highest average classification rates (p < 0.01) of 94.83 ± 5.5%, 92.57 ± 6.9%, and 85.66 ± 7.3% for the MA, MI, and four-class (left- and right-hand MI, MA, and baseline) tasks, respectively. The presented framework may be helpful in the training phase for selecting the appropriate features for robust fNIRS-based BCI applications.

Training Feedforward Neural Networks Using an Enhanced Marine Predators Algorithm

The input layer, hidden layer, and output layer are three models of the neural processors that make up feedforward neural networks (FNNs). Evolutionary algorithms have been extensively employed in training FNNs, which can correctly actualize any finite training sample set. In this paper, an enhanced marine predators algorithm (MPA) based on the ranking-based mutation operator (EMPA) was presented to train FNNs, and the objective was to attain the minimum classification, prediction, and approximation errors by modifying the connection weight and deviation value. The ranking-based mutation operator not only determines the best search agent and elevates the exploitation ability, but it also delays premature convergence and accelerates the optimization process. The EMPA integrates exploration and exploitation to mitigate search stagnation, and it has sufficient stability and flexibility to acquire the finest solution. To assess the significance and stability of the EMPA, a series of experiments on seventeen distinct datasets from the machine learning repository of the University of California Irvine (UCI) were utilized. The experimental results demonstrated that the EMPA has a quicker convergence speed, greater calculation accuracy, higher classification rate, strong stability and robustness, which is productive and reliable for training FNNs.

Canine dimensions for estimation of sex in adult and non-adult individuals with external validation by aDNA.

Using discriminant functions obtained from canine dimensions for sex estimation in human skeletons has frequently been proposed as a promising approach within assemblages, even when used in non-adult individuals. However, applicability of this method to adult and non-adult individuals from other assemblages was rarely investigated, probably due to frequently observed inter-population differences in tooth dimensions. In the present study, discriminant functions obtained for permanent canine dimensions at the cemento-enamel junction in a previous study of the early medieval assemblage from Greding, were applied to individuals from a late medieval Jewish cemetery at Erfurt, Germany. The results were validated by aDNA analyses. Prior to the application of the functions, canine dimensions of the assemblages were compared. The comparison showed largely corresponding canine dimensions between the two assemblages. The application of the formulae obtained on the early medieval assemblage to the late medieval assemblage at Erfurt revealed a 100 % correct classification rate in the adult individuals. In non-adults, the correct classification rate was poorer, with 7 of 9 (77.8 %) individuals correctly classified. The study showed that the application of discriminant functions for sex estimation from canine measurements to assemblages other than those for which the functions were developed can lead to high correct classification rates in adults if the average canine dimensions are similar in the respective assemblages. An application to non-adult individuals should only be made with caution as canine dimensions in the "non-survivors" can lead to an over-estimation of the proportion of female non-adults.