High Concentration Of Chloride Ions Research Articles

Effect of Anions on Deformation of Gallium-Based Liquid Metal in Solution.

In this study, deformation behaviors of gallium-based liquid metals in acidified cupric sulfate or cupric chloride solutions with varying concentrations of chloride anion or sulfate anion were investigated to explore their potential applications in soft machines and electronics. Gallium-based liquid metals are known for their unique deformability, making them promising materials for various fields. Previous research has shown that deformation of the liquid metal can be achieved in the presence of acidified cupric or ferric salts. However, the specific influence of different anions on the deformation process remains unclear. Our findings indicate that the deformation rate of the liquid metal increases with higher concentrations of chloride ions and decreases with higher concentrations of sulfate ions in the solution. UV-vis absorbance spectra of the solutions were analyzed to identify the formation of hydrated cupric cations. It was observed that increasing the concentration of Cl- ions promotes the formation of cupric-chloro complexes, thereby reducing the concentration of hydrated cupric ions in the solution. Furthermore, the addition of sulfate ions to the solution enhances the ionic strength of the medium, leading to the dissociation of cupric-chloro complexes. Additionally, sulfate ions can form insoluble layers with gallium ions, which impede the deformation of the liquid metal. The deformation rate of the liquid metal was found to be inversely correlated with the concentration of cupric ions in the solution. These results provide valuable insights into the deformable behavior of gallium-based liquid metals and their potential applications in liquid metal-based soft robots. This study highlights the importance of understanding the role of different anions in the deformation process of liquid metals, shedding light on the design and optimization of soft machines and electronics utilizing these materials.

Effect of chloride ions on the reactive species change pathway and removal performance in the MW/Co2+/PMS process

Efficient removal of refractory organic matter is the focus of research in the treatment of actual wastewater with Peroxymonosulfate-based advanced oxidation processes(PMS-AOPs). However, the high concentration of chloride ions (Cl−) ubiquitously present in wastewater changes the reactive species (RS) present in the process, and the mechanism of this change is still not clear. This study investigated the effects of Cl− on the transformation behavior of RS and treatment performance under microwave (MW) combined with cobalt ions (Co2+)-activated PMS. The results showed that increasing the Cl− concentration can enhance the removal performance of the MW/Co2+/PMS process for ammonia (NH4+-N), accompanied by the production of nitrate nitrogen (NO3-N), monochloramine (NH2Cl) and dichloramine (NHCl2), which was related to the transformation of existing reactive oxygen species (ROS, •OH and SO4•−) into reactive chlorine species (RCS), with hypochlorous acid (HClO) as an important intermediate. Cl− can generate HClO through free radical oxidation (•OH and SO4•−) dominance and non-free radical oxidation (PMS and Co3+) promotion, and the heat transferred by MW can further trigger conversion between HClO and PMS, thereby changing the distribution of RS. Increasing the dosage of PMS and the dosage of Co2+ promoted the transformation of Cl− to reactive species in the MW/Co2+/PMS process. At MW power=160W, [Co2+]=17.5μM,[PMS]=10mM, and [Cl−]=17mM, the maximum cumulative [HClO] reached 1910.97μM, and the decay rate was 0.1815 min-1.The macromolecular organic matter in aqueous environment competes with ammonia for the RCS. Through regulating [Cl−] in mature leachate, RCS has a certain oxidation effect to organic matter, but its limited oxidation ability leads to a decrease in the mineralization effect.

Analysis of the effectiveness of organic compounds from the amine group in precipitating ions from soda production wastewater

Treating wastewater from the soda industry is a complicated and lengthy process, requiring a great deal of labor and financial resources. No method has yet been developed to eliminate the environmental damage caused by the soda industry entirely. The work focused on the removal of chloride, sulfate, calcium, and magnesium from soda production wastewater by precipitation using organic solvents such as isopropylamine (IPA), diisopropylamine (DIIPA), propylamine (PA) and ethylamine (EA) in various proportions. Statistical modeling through Bayesian beta regression was used to select the amine most effectively removing the tested ions in precipitate form. The effect of precipitating agent dosage on the pH and conductivity of the solution was also investigated. Samples of wastewater obtained from the soda industry were characterized by high values of pH (up to 11.9), specific electrolytic conductivity (up to 128 mS cm-1), and high concentrations of sodium (up to 13 g L-1), chloride (up to 60 g L-1) and calcium (up to 24 g L-1) ions. Solvent-based precipitation showed that organic solvents are effective in precipitating salts from wastewater from the soda industry. Sulfate and chloride removal efficiencies of 85.1 and 34%, respectively, were observed. Statistical analysis showed that isopropylamine was the most effective amine for removal.

Simulation of concrete cracking and chloride diffusion under uniaxial compression

The dispersion and randomness of concrete cracking under compressive loads make it challenging to predict the diffusion rate of chloride ions. In this paper, the cohesive element method was employed to quantitatively calculate and determine the form and width of dispersed cracks in concrete. These results were found to be consistent with the real concrete crack forms obtained using digital image correlation (DIC) technology. The findings indicate that both the form and width of the cracks significantly impact the diffusion of chloride ions within the concrete. Chloride ion diffusion is enhanced when the cracks are closer to the penetration side or when there are more cracks present in the concrete. Additionally, an increase in axial load amplifies the randomness of chloride ion distribution at the same penetration depth. While coarse aggregates can impede chloride ion penetration, wider cracks lead to a higher concentration of chloride ions within the concrete. Our results contribute to a deeper understanding of chloride ion diffusion in cracked concrete under varying stress levels.

Degradation of organic pollutants by the Cl-/PMS process.

The viewpoints on whether high concentrations of chloride ion (Cl-) promote or inhibit the oxidation activity of activated persulfates are still inconclusive. Furthermore, the degradation of organic pollutants by the persulfates in the presence of high Cl- concentrations without any activation medium has not yet been studied. In this work, the efficiency and mechanism of degradation of organic pollutants such as carbamazepine (CBZ), sulfadiazine (SDZ), and phenol (PN) by Cl--activated PMS (denoted as Cl-/PMS) were investigated. Results showed that Cl- could effectively activate PMS for the complete removal of CBZ, SDZ, and PN with reaction kinetic constants of 0.4516min-1, 0.01753min-1, and 0.06805min-1, respectively. Parameters such as PMS dose, Cl- concentration, solution pH, and initial concentrations of organic pollutants that affect the degradation efficiencies of the Cl-/PMS process were optimized. Unlike conventional activated persulfates, it was confirmed that the free chlorine was the main active species in the Cl-/PMS process. Finally, the degradation by-products of CBZ and SDZ as well as their toxicity were detected, and a possible degradation pathway for CBZ and SDZ was proposed. Though higher toxic chlorinated by-products were generated, the Cl-/PMS process was still an efficient oxidation method for the removal of organic pollutants in aqueous solutions which contain high concentrations of Cl-.

The impact of seawater ions on urea decomposition and calcium carbonate precipitation in the MICP process

As an environmentally friendly biotechnology, the microbial induced calcium carbonate precipitation (MICP) provides a new approach to repair concrete cracks. Most existing studies focused on finding a suitable environment for bacteria to induce as much calcium carbonate as possible, but the effect of actual concrete service environment on the repair of concrete cracks was usually ignored. This work compared the repair quality of cracked specimens via MICP with the original Sporosarcina (Sp.) pasteurii strain and salt-tolerant Sp. pasteurii strain in the deionized water and simulated seawater. Then the adverse effects of seawater ions on the MICP process was investigated. The results showed that the permeability coefficient of repaired specimens was 175.7 % higher, and the bond strength between the calcium carbonate and concrete surface was lower in the simulated seawater as compared with the deionized water environment. The high concentration of sodium, chloride, magnesium, and sulfate ions in the seawater led to the decrease of the urea decomposition rate and calcium carbonate yield rate, which further induced the decreased super-saturation of calcium carbonate and the conversion of the calcium carbonate crystal form from calcite to vaterite. Besides, the salt-tolerant strain with a high salt adaptability showed a higher repair ability in the simulated seawater as compared with the original strain.

Atmospheric corrosion of iron under a single droplet: A new systematic multi-electrochemical approach

Utilizing a dedicated micro-sized three-electrode cell, this study systematically investigates early-stage electrochemical properties and corrosion behavior of pure iron under single droplets. Various volumes and NaCl concentrations were considered during the evaporation-driven shape and concentration evolution of single droplets. The measurements disclosed that reducing the droplet size from 5 µL to 1.5 µL at 0.01 M NaCl concentration, increased noise resistance (Rn) and polarization resistance (Rp) values. However, at 0.1 M and 0.2 M NaCl concentrations, reducing droplet size led to the domination of relatively high chloride ion concentration over oxygen diffusion, resulting in a very low Rn and Rp, and hence enhanced localized corrosion.

CORROSION BEHAVIOR OF HRB 400 REINFORCING STEEL WELDING JOINT IN SIMULATED CONCERT ENVIRONMENT BASED ON SVET

Based on SVET technology, the corrosion tendency of HRB400 steel welded joint and its base metal in simulated concrete environment and the influence of corrosion products were studied in this paper. The results show that the microstructure of the weld metal and base metal are ferrite+pearlite, and the microstructure of the heat affected zone is incompletely transformed bainite+ferrite+pearlite. Since the region produces smaller grains and more grain boundaries after welding, it becomes the most prone area for corrosion of welded joints. The addition of Cl– inhibited the passivation of HRB400 steel welded joint in the simulated concrete pore fluid. Through the analysis of Nyquist curve and polarization curve, it was found that under high chloride ion concentration, the base metal is more sensitive to chloride ions compared to welded joints.With the increase of Cl– concentration, the current density in the welded joint area gradually increased, but after reaching the chloride concentration of 0.5 mol/L, the current density tended to be flat. The occurrence of this phenomenon confirms the above conclusion. Further more,through SVET testing of the filler metal, it can be found that the filler metal has good adaptability to the HRB400 welding joint, forming a welding joint with better performance.

Effects of size on silver nanoparticle stability and inhibition of Vibro parahaemolyticus bacterial cell growth in high chloride media

The stability of silver nanoparticles at average sizes of 10 nm, 30 nm, and 50 nm with polyvinylpyrrolidone stabiliser was evaluated in a medium with high chloride ion concentration. The antibacterial activity of these silver nanoparticles against marine cholera Vibrio parahaemolyticus was studied and compared with ionic Ag+ and a bactericidal agent, Benzalkonium chloride. The results show that the smaller the silver nanoparticles, the higher the stability, and the higher the antibacterial ability, which is closer to the antibacterial ability of the ionic Ag+. These results show the outstanding bactericidal activity of small silver nanoparticles and the potential application of these tiny particles in inhibiting pathogenic bacteria in aquaculture.

High-sensitivity and energy-efficient chloride ion sensors based on flexible printed carbon nanotube thin-film transistors for wearable electronics

The advent of flexible single-walled carbon nanotube thin-film transistors (SWCNT-TFTs) has transformed electronics, providing significant benefits like low operating voltage, reduced power consumption, cost-effectiveness, and improved signal amplification. This study focuses on leveraging these attributes to develop a novel flexible high-sensitivity and energy-efficient chloride ion sensors based on printed flexible SWCNT-TFTs utilizing polymers-sorted semiconducting SWCNTs (sc-SWCNTs) as the active layers and ion liquids-poly(4-vinylphenol as dielectric layers along with the evaporated deposition of aluminum electrodes and printed silver electrodes as the gate and source-drain electrodes, respectively. The sensors exhibit several operational advantages, including low voltage requirements (≤1 V), rapid response speed (5.32 s), significant signal amplification (Up to 702.6 %), low power consumption (0.31 μJ at 1 mmol chloride ion), good repeatability, high sensitivity for both low and high concentrations of chloride ion (up to 100 mmol/L) and excellent mechanical flexibility (No obvious changes after bending for 10,000 times with a 5 mm radius). The detection mechanism of chloride ions was analyzed using X-ray Photoelectron Spectroscopy (XPS). It was found that chloride ions react with silver nanoparticles (AgNPs) to form silver chloride (AgCl) on printed electrodes, impeding carrier transport and reducing the currents in SWCNT TFTs. Importantly, our sensors' compatibility with smart devices allows for real-time monitoring of chloride ion levels in human sweat, offering significant potential for daily health monitoring.

Mechanism of local hydrogen entry into Fe sheets induced by atmospheric corrosion: Significance of potential, pH, and rust layer thickness

Local hydrogen entry under a NaCl droplet on Fe sheets was analysed by employing a hydrogenochromic sensor and electrochemical hydrogen permeation tests. Large crystallographic pits barely promoted hydrogen entry, because crystallographic pitting proceeded at potentials higher than the potential of the hydrogen evolution reaction. Hydrogen entry was accelerated because of acidification under an island-like rust layer. The rust layer became thick in its outer regions, mainly owing to severe corrosion and alkalisation around the rust-formed area. Hydrogen entry was prominent under the thick rust layer after disappearance of the droplet, owing to the high concentrations of chloride ions and protons.

Separation of Chloride and Sulfate Ions from Desulfurization Wastewater Using Monovalent Anions Selective Electrodialysis.

The high concentration of chloride ions in desulphurization wastewater is the primary limiting factor for its reusability. Monovalent anion selective electrodialysis (S-ED) enables the selective removal of chloride ions, thereby facilitating the reuse of desulfurization wastewater. In this study, different concentrations of NaCl and Na2SO4 were used to simulate different softened desulfurization wastewater. The effects of current density and NaCl and Na2SO4 concentration on ion flux, permselectivity (PSO42-Cl-) and specific energy consumption were studied. The results show that Selemion ASA membrane exhibits excellent permselectivity for Cl- and SO42-, with a significantly lower flux observed for SO42- compared to Cl-. Current density exerts a significant influence on ion flux; as the current density increases, the flux of SO42- also increases but at a lower rate than that of Cl-, resulting in an increase in permselectivity. When the current density reaches 25 mA/cm2, the permselectivity reaches a maximum of 50.4. The increase in NaCl concentration leads to a decrease in the SO42- flux; however, the permselectivity is reduced due to the elevated Cl-/SO42- ratio. The SO42- flux increases with the increase in Na2SO4 concentration, while the permselectivity increases with the decrease in Cl-/SO42- ratio.

Electrochemical migration behavior between Cu and Ag under a thin electrolyte layer containing chloride

PurposeThe purpose of this paper is to investigate the effects of chloride ion concentration and applied bias voltage on the electrochemical migration (ECM) behavior between Cu and Ag under an NaCl thin electrolyte layer (TEL).Design/methodology/approachA self-made experimental setup for the ECM behavior between Cu and Ag was designed. An HD video measurement microscopy was used to observe the typical dendrite/corrosion morphology and pH distribution. Short-circuit time (SCT), short-circuit current density and the influence of the galvanic effect between Cu and Ag on their ECM behavior were studied by electrochemical tests. The surface morphology and composition of dendrite were characterized by FESEM/EDS.FindingsThe SCT increased with increasing NaCl concentration but decreased with increasing applied bias voltage, and the SCT between Cu and Ag was less than that between Cu and Cu because their galvanic effect accelerated the dissolution and migration of Cu. When NaCl concentration was less than or equal to 6 mmol/L, cedar-like dendrite was formed, whereas no dendrite formed and only precipitation occurred at high chloride ion concentration (100 mmol/L). The composition of the dendrite between Cu and Ag was copper.Research limitations/implicationsThe significance of this study is to clarify the ECM failure mechanism of printed circuit board (PCB) with an immersion silver surface finish (PCB-ImAg).Practical implicationsThis study provides a basic theoretical basis for the selection of protective measures and metal coatings for PCB.Social implicationsThe social implication of this study is to predict the service life of PCB.Originality/valueThe ECM behavior of dissimilar metals under a TEL was investigated, the influence of the galvanic effect between them on their ECM was discussed, and the SCT increased with increasing NaCl concentration.

Oxalate anions-intercalated NiFe layered double hydroxide as a highly active and stable electrocatalyst for alkaline seawater oxidation

Seawater electrolysis is gaining recognition as a promising method for hydrogen production. However, severe anode corrosion caused by the high concentration of chloride ions (Cl–) poses a challenge for the long-term oxygen evolution reaction. Herein, an anti-corrosion strategy of oxalate anions intercalation in NiFe layered double hydroxide on nickel foam (NiFe-C2O42– LDH/NF) is proposed. The intercalation of these highly negatively charged C2O42– serves to establish electrostatic repulsion and impede Cl– adsorption. In alkaline seawater, NiFe-C2O42– LDH/NF requires an overpotential of 337 mV to gain the large current density of 1000 mA cm−2 and operates continuously for 500 h. The intercalation of C2O42– is demonstrated to significantly boost the activity and stability of NiFe LDH-based materials during alkaline seawater oxidation.

Two Novel Metformin Carboxylate Salts and the Accidental Discovery of Two 1,3,5-Triazine Antihyperglycemic Agent.

Metformin (MET), commonly marketed as a hydrochloride salt (MET-HCl) for better pharmacokinetic profile over the free base, would release a high concentration of chloride ions and cause adverse gastrointestinal effects. The preparation of chloride-free MET salts could potentially circumvent this issue. In this study, seven carboxylic acids (formic acid, acetic acid, malonic acid, succinic acid, fumaric acid, cinnamic acid, and acetylsalicylic acid) were used for preparing MET carboxylate salts. When compared with MET-HCl, all MET salts/salt hydrates show lower dissolution rates in pH 6.8 phosphate buffer. However, the cinnamic acid and acetylsalicylic acid show significantly higher dissolution rates in the forms of MET salt/salt hydrate. In the permeability test, the permeability of the MET in all of the salts was not improved. However, the permeability of cinnamic acid in the MET cinnamate is reduced, and the permeability of acetylsalicylic acid in the MET acetylsalicylate is increased. Meanwhile, at a higher crystallization temperature, the acetone solvent and a hydrolyzed product of acetylsalicylic acid react with MET respectively, leading to two unexpected 1,3,5-triazine derivatives. The results of in vitro bioactivity assays indicate that one of the triazine molecules promote glucose consumption more effectively than MET-HCl, and had relatively weak lactate production ability at low concentration. This glucose metabolism regulating compound may serve as a novel lead antihyperglycemic agent for further optimization.

Hybrid Polymer Salogels for Reversible Entrapment of Salt-Hydrate-Based Thermal Energy Storage Materials.

One of the challenges preventing wide use of inorganic salt hydrate phase change materials (PCMs) is their low viscosity above their melting point, leading to leakage, phase segregation, and separation from heat exchanger surfaces in thermal management applications. The development of a broad strategy for using polymers that provide tunable, temperature-reversible shape stabilization of a variety of salt hydrates by using the lowest possible polymer concentrations is hindered by differences in solubility and gelation behavior of polymers with change in the type of ion. This work addressed the challenge of creating robust, temperature-responsive shape-stabilizing polymer gels (i.e., salogels) using a low cost PCM, calcium chloride hexahydrate (CaCl2·6H2O, CCH). Due to the extremely high (9 M) concentration of chloride ions and the tendency to salting-out polymer chains, the previous strategy of using single-polymer salogels was not successful. Thus, this work introduced a strategy of using two polymers, poly(vinyl alcohol) and ultrahigh molecular weight polyacrylamide (PVA and PAAm, respectively), along with borax as a cross-linker to achieve temperature-reversible, shape-stable salogels. This system resulted in robust salogels whose gel-to-sol transition temperature (Tgel) was tunable within an application-relevant range of gelation temperature (30-80 °C). This behavior was enabled by a synergistic combination of dynamic covalent cross-links between PVA units and entanglements of PAAm chains which were combined into a single hybrid network. The hybrid salogels had <5 wt % polymer content, maintaining ∼95% of the heat of fusion of the pure PCM. Importantly, the noncovalent nature of gelation supported thermo-reversibility of gelation, shape stability, and retention of thermal properties over 50 melting/crystallization cycles.

Ultrahigh dark and light-improved chloride removal performance of magnetite bismuth oxide thin flakes with low crystallinity

The high concentration of chloride (Cl-) ions in wastewater poses environmental risks. The bismuth oxide (Bi2O3)-based Cl- removal method has gained significant attention due to its high selectivity towards Cl- ions. However, it still faces challenges related to strong acid condition and excessive dosage. Herein, the mixed-ferrites (M-Fe3O4) nanoparticles with broadband absorption property were combined with Bi2O3 to form to the magnetite Bi2O3 (FBO) composites. Due to the space separation of M-Fe3O4 nanoparticles in the thin Bi2O3 flakes, FBO had a loose structure, and its sample after 100 °C treatment (FBO-100) possessed weak crystallinity and the largest specific surface area, which enabled it to possess the highest Cl- removal efficiency of 98.4% at pH = 1 in the dark. Under UV-Vis-NIR irradiation, the Cl- removal efficiencies of FBO-100 at pH = 2, 3, and 5 increased from 71.4%, 56.3%, and 54.5% to 84.6%, 65.5%, and 58.0%, respectively. During the light-irradiated Cl- removal process, the heterostructures of Bi2O3/M-Fe3O4, Bi2O3/BiOCl/M-Fe3O4, and BiOCl/M-Fe3O4 were successively built, and the oxidative photocorrosion of Bi2O3 caused by holes played the predominant role in improving the Cl- removal efficiency, compared with the •OH, Cl•, and O2•− radicals. FBO-100 had stable cyclic Cl- removal performance and high safety, which is expected to be of a good application prospect for Cl- removal.

Association of hypertension in pregnancy with serum electrolyte disorders in late pregnancy among Cameroonian women

Multiple electrolyte disorders, including sodium, potassium and calcium disorders, have been associated with hypertension in pregnancy. Most of these studies failed to evaluate the combined effect of low and high sodium, potassium, calcium and chloride ion concentrations on hypertension in pregnancy. This study evaluates the combined effect of these ion categories (low, normal, high) on hypertension in pregnancy. Biochemical ion assays and blood pressure measurements were carried out on 1074 apparently healthy pregnant women in late third trimester. Serum potassium, sodium, chloride, and ionised calcium were measured by ion-selective electrode potentiometry, while total plasma calcium was measured by absorption spectrophotometry. Hypertension in pregnancy was defined as systolic blood pressure ≥ 140 mmHg and/or diastolic blood pressure ≥ 90 mmHg. The prevalence of hyponatraemia, hypokalaemia, hypochloraemia, ionised hypocalcaemia and total hypocalcaemia in late pregnancy was 1.30 [0.78–2.18]%, 3.55 [2.60–4.84]%, 1.96 [1.28–2.97]%, 1.49 [0.92–2.21]% and 43.58 [40.64–46.56]%, respectively. Hypernatraemia, hyperkalaemia, hyperchloraemia, ionised hypercalcaemia and total hypercalcaemia were found in 1.49 [0.92–2.41]%, 2.34 [1.59–3.43]%, 4.38 [3.31–5.77]%, 39.94 [37.06–42.90]%, 2.79 [1.96–3.96]% of the participants, respectively. The prevalence of hypertension in pregnancy was 7.17 [5.77–8.87]%. When ion categories were considered in multiple logistic regression, only ionised and total calcium had significant associations with hypertension in pregnancy. Women with ionised hypercalcaemia had lower odds of hypertension in pregnancy (AOR = 0.50 [0.29–0.87], p-value = 0.015), and women with total hypocalcaemia had higher odds of hypertension in pregnancy (AOR = 1.99 [1.21–3.29], p-value = 0.007), compared to women with ionised and total normocalcaemia, respectively. Increasing kalaemia was associated significantly with higher odds of hypertension in pregnancy; however, kalaemia below and above the normal concentrations had no significant association with hypertension. Nonetheless, participants with kalaemia ≤ 3.98 mmol/L, had lower odds of hypertension in pregnancy compared with those with higher kalaemia (OR = 0.40 [0.24–0.66], p-value = 0.0003). Calcium disorders remain the most frequent electrolyte disorders in pregnancy. When normal cut-offs are considered for calcium and other ions, only ionised and total calcium influence the occurrence of hypertension in pregnancy. Kalaemia seems to affect hypertension in pregnancy but primarily within its normal concentrations. Serum electrolyte follow-up is indispensable for a proper pregnancy follow-up.

The role of reactive chlorine and nitrogen species in micropollutant degradation in UV/monochloramine

Monochloramine (NH2Cl) is applied upstream of reverse osmosis (RO) membranes for biofouling control. Residual NH2Cl can undergo UV photolysis downstream, generating reactive species for an AOP to occur. At the bench-scale, NH2Cl is typically generated from combining sodium hypochlorite and ammonium chloride or sulfate. This study investigated the degradation of four compounds of interest – acetaminophen, caffeine, sucralose and 1,4-dioxane – in UV/NH2Cl at the bench scale to study their reactivity with reactive chlorine species (RCS) and reactive nitrogen species (RNS). With methanol acting as a scavenger of •OH radicals, the performance of UV/NH2Cl was compared to UV/H2O2 and UV/HOCl. In UV/H2O2, dioxane was severely inhibited at 1–2 mg/L H2O2 and comparable at 5 mg/L to UV/NH2Cl. When ammonium sulfate ((NH4)2SO4) was used as the ammonia source over ammonium chloride (NH4Cl), the overall degradation of micropollutants was higher and caffeine was exclusively degraded. At 1–2 mg/L NH2Cl, dioxane degraded by 16.2–17.8% and 2.92–5.29% from (NH4)2SO4 and NH4Cl respectively while caffeine degraded by 7.45–9.61% with NH2Cl ((NH4)2SO4), but not degrade with NH2Cl (NH4Cl). The higher concentration of chloride ions from NH4Cl significantly influenced the speciation of generated radicals and impacted micropollutant degradation. This suggests that the reactivity of more selective RCS (Cl2•−, •ClO, ClOH•−) and RNS (•NH2, •NO, •NO2, etc.) varies with micropollutants of interest. The presence of higher chloride concentration from the ammonia source inhibited the generation of •OH radicals with •OH consumed by RNS to form NO3− (μg/L levels), showing the impact of the choice of ammonia source and the water matrix on UV/NH2Cl performance.

Influence of chloride ions on corrosion behaviour of zinc-alloy in the simulated body fluid solution

ABSTRACT The bio-corrosion behaviours of the Zn alloy in the simulated body fluid (SBF) at different chloride ion concentrations were investigated. The Potentiodynamic Polarisation Curve (PDP) and Electrochemical Impedance Spectroscopy (EIS) results indicate that the corrosion rate of Zn alloy decreases with higher chloride ion concentrations. The decrease in corrosion rate is due to the formation of a protective layer of ZnCl2 nanofibres and agglomerates. The surface morphology and analytical studies of the Zn alloy were carried out by scanning electron microscopy (SEM), EDX, atomic force microscopy (AFM), and X-ray diffractometry. The SEM, EDX, and X-ray diffraction studies indicate the formation of nanofibres and agglomerates of ZnCl2. The AFM measurements show the increase in surface roughness due to the in situ formation of nanofibres and agglomerates on the alloy surface. Therefore, these results are useful to tailor the design of Zn alloy-based biomedical materials being implanted for the living body.