High Amylose Content Research Articles

Cooked Rice Textural Properties and Starch Physicochemical Properties from New Hybrid Rice and Their Parents.

Although great progress has been made in the development of hybrid rice with increased yield, challenges for the improvement of grain quality still remain. In this study, the textural properties of cooked rice and physicochemical characteristics of starch were investigated for 29 new hybrid rice derived from 5 sterile and 11 restorer rice lines. Except for one sterile line Te A (P1) with high apparent amylose content (AAC) (26.9%), all other parents exhibited a low AAC. Gui 263 demonstrated the highest AAC (20.6%) among the restorer lines, so the Te A/Gui 263 hybrid displayed the highest AAC (23.1%) among all the hybrid rice. The mean AAC was similar between sterile, restorer lines and hybrid rice. However, the mean hardness of cooked rice and gels of sterile lines were significantly higher than that of restorer lines and hybrid rice (p < 0.05). Pasting temperature and gelatinization temperatures were significantly higher in the hybrids than in the restorer lines (p < 0.05). Cluster analysis based on the physicochemical properties divided the parents and hybrid rice into two major groups. One group included P1 (Te A), P12 and P14 and three hybrid rice derived from P1, while the other group, including 39 rice varieties, could be further divided into three subgroups. AAC showed significant correlation with many parameters, including peak viscosity, hot peak viscosity, cold peak viscosity, breakdown, setback, onset temperature, peak temperature, conclusion temperature, enthalpy of gelatinization, gel hardness and cooked rice hardness (p < 0.05). Principal component analysis revealed that the first component, comprised of the AAC, peak viscosity, breakdown, setback, onset temperature, peak temperature, conclusion temperature and gel hardness, explained 44.1% of variance, suggesting AAC is the most important factor affecting the grain quality of hybrid rice. Overall, this study enables targeted improvements to key rice grain quality attributes, particularly AAC and textural properties, that will help to develop superior rice varieties.

Resistant starch formation and changes in physicochemical properties of waxy and non-waxy rice starches by autoclaving-cooling treatment

ABSTRACT Resistant starch (RS) has drawn great attention from both starch research and industrial communities due to its potential health benefits. Physical starch modification approach, such as autoclaving and cooling cycle treatment, offers high potential method of enhancing resistant starch fraction due to its simplicity and cost-effectiveness. Here, the non-waxy KDML105 and waxy RD6 rice starches were physically modified by one, three, and five autoclaving and cooling cycles. The comparative impacts of the modification on the RS content and starch physicochemical properties were examined. Their native starch granules were transformed into a larger continuous matrix with suppressed thermal and pasting properties. However, modified KDML105 starch gels with higher amylose content and the presence of amylose lipid complexes were able to retrograde and maintain viscosity better than the modified RD6 starch. The RS content was also increased with the addition of treatment cycles in KDML105 starch. As a result, the RS content of native KDML105 starch was enhanced from 0.13% to 2.59% after five cycles of the treatment. The dissimilarities observed between the two modified starches could be due to the different degrees of increased proportions of ordered (R1047/1022) and double helical (R995/1022) structures, and the disruption of A- and V-type crystals. Therefore, the RS content was attributed to an interplay of alterations in ordered structure, amylose, and amylose-lipid complex during autoclaving-cooling cycles.

Production of resistant starch type 3 from cassava starch with high shear mixing and centrifugation treatment to increase its total dietary fibre content

SummaryCassava starch has a big potential to be a source material for producing low‐calorie starch by converting it to resistant starch. However, its original structure can prevent retrogradation of the amylose fraction to produce resistant starch so that reduce the total dietary fibre value. In this research, high shear mixing (HSM) is used to assist the gelatinisation process to provide disintegration of the cassava starch structure. Centrifugation was carried out to separate the top layers which have a high content of free amylose resulting in better retrogradation. The starch–water suspension was processed using HSM at a rotational speed of 9000–12 000 at 95 °C for 15 min. Then, the starch suspension was separated by centrifugation for 30 min. The product was then analysed using total dietary fibre (TDF), component carbohydrate analysis, scanning electron microscope (SEM) and x‐ray diffraction (XRD). From the analysis results, this method can increase the TDF content of the product up to 14.66% at 12 000 rpm.

Recent Advancements on Barnyard Millet Starch: A Sustainable Alternative to Conventional Starch

AbstractThe global demand for starch has been steadily increasing, driven by various industries such as food, pharmaceuticals, and textiles. However, conventional starch sources, such as corn and wheat, are associated with significant environmental concerns and resource depletion. Therefore, there is a growing need to explore sustainable alternatives to conventional starches. Barnyard millet starch can be a promising sustainable alternative to conventional starch. The starch extracted from barnyard millet exhibits unique physicochemical properties, including high amylose content, small granule size, and good gel‐forming ability. These properties make it suitable for various industrial applications. In the food industry, it can be used as a thickening agent, stabilizer, and fat replacer in various products, including sauces, soups, bakery items, and dairy alternatives. Moreover, barnyard millet starch shows promise in the textile industry as a sizing agent and for producing biodegradable films. However, challenges related to scaling up production, processing techniques, and market acceptance must be addressed to realize the potential of barnyard millet starch fully. Embracing barnyard millet starch can contribute to a more sustainable and resource‐efficient future, reducing the ecological footprint associated with starch production. This review article focuses on the properties, modifications, functionality, and applications of barnyard starch.

Influence of Heat Moisture, Ultrasonication, and Gamma Irradiation on Pasting, Thermal, Morphological, and Physicochemical Properties of Indian Teff (Eragrostis tef) Starch

AbstractThe present work is conducted to study the effect of heat‐moisture treatment (HMT), ultrasonication (US), and gamma‐irradiation (GI) on various properties of teff starch. Starch is subjected to HMT at 28% moisture level, US at a frequency of 20 kHz for 30 and 60 min, and GI at 5 and 10 kGy. US has an increased swelling power (8.22–9.39 g g−1) and solubility (9.5–10.5%). Water binding and Oil binding capacity are improved in modified starches than native. The highest amylose content (24.94–25.24%) is observed in US than native (20.82%). Thermal characteristics show an increment in the modified teff starches with enthalpies varied from 2.30 to 3.81 J g−1. Significant differences in starch gel textural properties are identified. Similar outcomes for native and modified findings are seen in Fourier transform infrared spectroscopy spectra. X‐ray diffraction shows a similar X‐ray pattern with crystallinity decreases for HMT (28.07%) and gamma irradiated starches (30.21%) and increases for ultrasonicated samples (32.23%). The morphological changes in teff starch are observed after physical modification. All in all, significant improvements have been reported in modified teff starch, which not only increases its industrial application but also improves the utilization of teff grain globally.

Influence of enzymatic extraction on the properties of corn starch

Corn starch played an important role in the food industries, while traditional extraction method involved using sulfur dioxide that could easily cause environmental pollution and equipment corrosion. Based on these drawbacks, the main objective of this study was to develop a feasible two-step enzymatic extraction method that could isolate starch from corn kernels and evaluate the properties of corn starch. The physicochemical components of steep liquor during enzymatic extraction were researched, the single-factor experiments and response surface methodology were used to optimize the steeping conditions. As a result, optimized steeping parameters of which the first step time was 30 h, the lactic acid solution concentration was 0.45%, the protease content was 480 U/g, the l-cysteine content was 0.45 g, and the second step time was 4 h. The corn starch yield (65.18%) with enzymatic extraction was higher than that of traditional extraction (54.73%). The solubility and swelling power of all starch samples were raised with the temperature increasing. The starch extracted using the enzymatic method had a higher amylose content (35.18%) and mean diameter (30.99 μm). Compared with commercial corn starch, the starch samples presented nearly identical FT-IR spectra, the same A-type crystalline pattern and morphology, furthermore, a higher resistant starch content was detected in corn starch obtained through extraction methods. This finding will provide useful information to food industries for extraction of corn starch.

CRISPR/Cas9-mediated enhancement of semi-dwarf glutinous traits in elite Xiangdaowan rice (Oryza sativa L.): targeting SD1 and Wx genes for yield and quality improvement.

In rice cultivation, the traits of semi-dwarfism and glutinous texture are pivotal for optimizing yield potential and grain quality, respectively. Xiangdaowan (XDW) rice, renowned for its exceptional aromatic properties, has faced challenges due to its tall stature and high amylose content, resulting in poor lodging resistance and suboptimal culinary attributes. To address these issues, we employed CRISPR/Cas9 technology to precisely edit the SD1 and Wx genes in XDW rice, leading to the development of stable genetically homozygous lines with desired semi-dwarf and glutinous characteristics. The sd1-wx mutant lines exhibited reduced gibberellin content, plant height, and amylose content, while maintaining hardly changed germination rate and other key agronomic traits. Importantly, our study demonstrated that exogenous GA3 application effectively promoted growth by compensating for the deficiency of endogenous gibberellin. Based on this, a semi-dwarf glutinous elite rice (Oryza sativa L.) Lines was developed without too much effect on most agronomic traits. Furthermore, a comparative transcriptome analysis unveiled that differentially expressed genes (DEGs) were primarily associated with the anchored component of the membrane, hydrogen peroxide catabolic process, peroxidase activity, terpene synthase activity, and apoplast. Additionally, terpene synthase genes involved in catalyzing the biosynthesis of diterpenoids to gibberellins were enriched and significantly down-regulated. This comprehensive study provides an efficient method for simultaneously enhancing rice plant height and quality, paving the way for the development of lodging-resistant and high-quality rice varieties.

Effect of starch and protein on eating quality of japonica rice in Yangtze River Delta

This study examined four types of japonica rice from Yangtze River Delta, categorized based on amylose content (AC) and protein content (PC): high AC with high PC, high AC with low PC, low AC with high PC, and low AC with low PC. It systematically explored the effect of starch, protein and their interactions on eating quality of japonica rice. Rheological analysis revealed that increased amylose, long chains amylopectin or protein levels during cooking strengthen starch-protein interactions (hydrogen bonding), forming a firm gel network. Scanning electron microscopy showed that increased amylose, long chains amylopectin or protein levels made protein and starch more stable in combination during cooking, limiting starch structure cleavage. Therefore, the eating quality of high AC in similar PC japonica rice and high PC in similar AC japonica rice were poor. Further, correlation and random-forest analysis (RFA) identified amylose as the most influential factor in starch-protein interactions affecting rice eating quality, followed by amylopectin and protein. RFA also revealed that in high AC japonica rice, the interactions of Fb3 and albumin with amylose were more conducive to forming good eating quality. In low AC japonica rice, the interactions of Fb2 and prolamin with amylose were more beneficial.

Natural fermentation of potato (Solanum tuberosum L.) starch: Effect of cultivar, amylose content, and drying method on expansion, chemical and morphological properties

Natural fermentation with sun-drying is a modification that promotes the expansion capacity of starch, and its effects on potato starch have not been reported so far. The aim of this study was to evaluate the effects of the amylose content of potato (Solanum tuberosum L.) starches and natural fermentation followed by oven or sun drying on its properties. Cassava starch was also used a control. Native and fermented starches were evaluated based on their chemical composition, amylose, carboxyl and carbonyl content as well as their thermal, pasty, and morphological properties. The fermentation water was evaluated by pH and titratable acidity to control the process. Puffed balls were prepared to evaluate expandability, mass loss, porosity and texture. The fermentation intensity was greater for potato and cassava starch with low-amylose content than for potato starch with higher amylose content. In addition, the acidity of the fermentation water increased faster with cassava starch than with potato starches. The fermented potato starches with the highest amylose content had low acidity and low expansion capacity compared to the fermented potato and cassava starches with low-amylose content. Fermentation and sun-drying of low-amylose potato and cassava starches increased the expansion and reduced the hardness of the puffed balls.

Isolation and Characterization of Starch from Different Potato Cultivars Grown in Croatia

Starch is a polysaccharide that is widely used in food and other industries; therefore, due to its great potential, it is attempted to be maximally isolated from various foods rich in starch. Commonly, potatoes are used for starch production due to the relatively high starch content in tubers, and the process itself is complex and includes several steps. The aim of this study was to isolate and characterize starch from eight potato varieties. First, the basic chemical composition of the potato samples was determined, and then the isolation was carried out under laboratory conditions. The isolated starch was air dried, then ground and sieved through a 400 µm sieve. The basic chemical composition, amylose content, starch color, swelling capacity and solubility index, clarity of starch pastes, texture of starch gels and thermo-physical properties (gelatinization and retrogradation) were determined in the obtained starch samples. The results showed that the SL 13–25 potato variety had the lowest starch content, while the Stilleto variety had the highest starch content. The content of protein, fat, ash and crude fiber was relatively low in all of the isolated starches, indicating their high purity. Also, the difference in the color of the isolated starches was difficult to see. The highest amylose content had starch from Saprodi, while the lowest was observed in starch from SL 13–25. Starch from the cv. Dartiest had the highest, while starch from the cv. Sereno had the lowest gel strength. The starch of the cv. Dartiest also had the highest clarity value. The retrogradation transition temperatures and enthalpies were lower compared to the gelatinization temperatures and enthalpies. With the increasing temperature, both the swelling capacity and the solubility index of all the samples increased. According to the obtained differences, this study confirmed the significant influence and role of different cultivars on starch characteristics.

QTL Detection and Candidate Gene Identification for Eating and Cooking Quality Traits in Rice (Oryza sativa L.) via a Genome-Wide Association Study.

The eating and cooking quality (ECQ) directly affects the taste of rice, being closely related to factors such as gelatinization temperature (GT), gel consistency (GC) and amylose content (AC). Mining the quantitative trait loci (QTLs), and gene loci controlling ECQ-related traits is vital. A genome-wide association study on ECQ-related traits was conducted, combining 1.2 million single nucleotide polymorphisms (SNPs) with the phenotypic data of 173 rice accessions. Two QTLs for GT, one for GC and five for AC were identified, of which two were found in previously reported genes, and six were newly found. There were 28 positional candidate genes in the region of qAC11. Based on a linkage disequilibrium (LD) analysis, three candidate genes were screened within the LD region associated with AC. There were significant differences between the haplotypes of LOC_Os11g10170, but no significant differences were found for the other two genes. The qRT-PCR results showed that the gene expression levels in the accessions with high ACs were significantly larger than those in the accessions with low ACs at 35d and 42d after flowering. Hap 2 and Hap 3 of LOC_Os11g10170 reduced the AC by 13.09% and 10.77%, respectively. These results provide a theoretical and material basis for improving the ECQ of rice.

Insight into the nutritional, physicochemical, functional, antioxidative properties and in vitro gastrointestinal digestibility of selected Thai rice: Comparative and multivariate studies

Nutritional, physicochemical, functional, antioxidative and digestion properties of brown and white rice flours from four Thai rice varieties (Luangpatue, upland rice, RD43, and Hommali) were investigated and compared. Due to differences in grain color, the color parameters of flours varied significantly. Protein, fat, ash, carbohydrate, and moisture content, total dietary fiber, and calories of these rice flours were 6.94–10.21%, 1.68–3.16%. 0.554–1.442%, 71.20–79.68%, 9.79–10.53%, 1.07–3.64%, and 350.82–362.73 kcal/100g, respectively. RD43 brown rice (18.4%) and Luangpatue white rice (26.5%) respectively exhibited the lowest and highest amylose content. Luangpatue rice flours also showed higher swelling power, setback value, final viscosity, and thermal properties than other varieties. The variations in hydration properties and oil absorption index were noticeable among these rice flours. In addition, the highest level of total phenolic content and antioxidant activity led to the lowest estimated glycemic index (eGI = 62.92) found in upland brown rice. It was confirmed by the multivariate analysis results. This study reported the diverse physicochemical properties and composition-property relationships of two kinds of flours from four rice varieties collected from Thailand for the first time. It exhibited possible capabilities for the development of various rice-based products that promote health based on their characteristics on industrial scale.

Interaction between genetic regions responsible for the starch properties in non-glutinous rice varieties in Hokkaido, Japan.

Starch properties are the major determinants of grain quality and food characteristics in rice (Oryza sativa L.). Understanding the interactions between genetic regions responsible for starch properties will lead to the development of rice cultivars with desirable characteristics. This study investigated the genetic effect and interaction between qAC9.3, a low-amylose quantitative trait locus (QTL), and the genetic region around Starch branching enzyme IIb (SbeIIb). Both these factors are responsible for the starch properties of the Hokkaido breeding population. The amylose content, pasting temperature, and amylopectin chain-length distribution were compared using F5 lines derived from the cross between the lower amylose content and lower pasting temperature strain 'Hokkai332 (qAC9.3, SbeIIb)' and the higher amylose content and higher pasting temperature variety 'Kitagenki (-, SbeIIbsr )'. The qAC9.3 genotype exhibited low amylose content and reduced the hardness of boiled rice but increased the ratio of amylopectin long chains and did not alter the pasting temperature. In contrast, the SbeIIb genotype was associated with pasting temperature but did not affect the amylose content and hardness of boiled rice. It was suggested that appropriately selecting genotypes of these genetic regions and QTL would allow the fine-tuning of starch properties of cooked rice suitable for future demand.

Impact of mutations in starch synthesis genes on morphological, compositional, molecular structure, and functional properties of potato starch.

Morphology, composition and molecular structure of starch directly affect the functional properties. This study investigated the morphological, compositional, and molecular structure properties of starch from starch branching enzyme gene (SBE) and granule-bound starch synthase gene (GBSS) mutated potato, and their associations with thermal, pasting, and film-making properties. SBE mutations were induced in native variety Desiree while GBSS mutations were herestacked to a selected SBE mutated parental line. Mutations in SBE resulted in smaller starch granules and higher amylose content, while GBSS mutations in the SBE background reduced amylose content. Mutations in SBE, particularly with GBSS mutations, significantly increased total phosphorus content. 31P NMR spectroscopy revealed higher proportions of C6-bound phosphate than of C3-bound phosphate in all studied lines. Amylopectin unit chain and internal chain distributions showed higher proportions of long chains in mutated lines compared with Desiree. These amylopectin long-chains were positively correlated with gelatinizationand, pasting temperatures, and temperature at peak viscosity. Short amylopectin chains showed positive correlations with breakdown viscosity, but negative correlations with the crystal melting temperature of retrograded starch. Total phosphorus content was positively correlated with the crystal melting temperature of retrograded starch. Starch from different lines was used to produce a series of potato starch films that differed in morphology and functional properties. A negative correlation was observed between Young's modulus of films and the long amylopectin-chain fraction. Thermal gravimetric analysis revealed highest thermal stability of Desiree starch films, followed by films from SBE-mutated high-amylose lines. Oxygen transmission rate and oxygen permeability analyses showed that films made with starch from selected GBSS and SBEs mutated line maintained comparable oxygen barrier properties to Desiree film. These insights on the impact of genetic mutations on starch properties indicate potential applications of in-planta starch modification for specific end-uses including packaging.

Determination of amylose content of traditional rice varieties of Kerala using PCR-based molecular markers

The present study uses molecular approach to assess the amount of amylose in collected rice genotypes using PCR based markers. The polymorphism of Waxy allele which encodes the major enzyme catalyzing amylose synthesis was analyzed in the collected rice samples to determine the amylose content in the samples. All the rice varieties under study expressed Wxa allele corresponding to intermediate to high amylose content. This study proves that simple PCR technique can be used to detect Single nucleotide polymorphism mutation at Wx locus and provides a cost-effective alternative to predict amylose content in rice.

“Structure-function” analysis using starches isolated from Lycoris chinensis bulbs of different developmental stages

In this study, Lycoris chinensis bulbs of four developmental stages were compared for starch characteristics. Based on correlation analysis and hierarchical cluster analysis, the relationships among 36 traits were discussed. Compared to commonly consumed starches, L. chinensis starch had higher amylose content (33.4–43.2 %) and weight-average molar mass (36410–82,781 kDa), lower gelatinization temperature (61.8–68.1 °C), gel hardness (19.0–39.5 g) and viscosities. Among developmental stages, starches varied significantly in characteristics. As compared to juvenile stage (S1), mature bulbs (S4) had higher amylose content, lower gelatinization temperature, weight-average molar mass and degree of polymorphism. Correlation analysis revealed that the molecular weight-related traits had significantly positive correlations to gelatinization temperature (Tp, p < 0.05), positive but weak correlations to traits of particle size distribution, significantly negative correlations to AAC and many parameters of viscosity properties (p < 0.05). Based on the results of correlation analysis and hierarchical cluster analysis, the 36 traits of starch characteristics were proposed to be divided into three groups: particle size-related traits, molecular weight-related traits and AAC-related traits. The information presented in the current study are useful for future studies on starches of Lycoris and other bulb species, and instructive for future studies in investigating the “Structure-Function” relationship in starch.

Carotenoid degradation rate in milled grain of dent maize hybrids and its relationship with the grain physicochemical properties

Carotenoids in maize grain degrade during storage, but the relationship between their stability and the physicochemical properties of the grain is unclear. Therefore, the carotenoid degradation rate in milled grain of three dent hybrids differing in grain hardness was evaluated at various temperatures (-20, 4 and 22 °C). The carotenoid degradation rate was calculated using first-order kinetics based on the content in the samples after 7, 14, 21, 28, 42, 56, 70 and 90 days of storage and related to the physicochemical properties of the grain. The highest grain hardness was found in the hybrid with the highest zein and endosperm lipid concentration, while the lowest grain hardness was found in the hybrid with the highest amylose content and the specific surface area of starch granule (SSA). As expected, carotenoids in milled maize grain were most stable at −20 °C, followed by storage at 4 and 22 °C. Tested hybrids differed in the degradation rate of zeaxanthin, α-cryptoxanthin and β-carotene, and these responses were also temperature-dependent. In contrast, all hybrids showed similar degradation rate for lutein and β-cryptoxanthin regardless of the storage temperature. Averaged over the hybrids, the degradation rate for individual carotenoids ranked as follows: lutein < zeaxanthin < α-cryptoxanthin < β-cryptoxanthin < β-carotene. The lower degradation rate for most carotenoids was mainly associated with a higher content of zein and specific endosperm lipids, with the exception of zeaxanthin, which showed an opposite pattern of response. Degradation rate for lutein and zeaxanthin negatively correlated with SSA, but interestingly, small starch granules were positively associated with higher degradation rate for mostcarotenoids. Dent-type hybrids may differ significantly in carotenoid degradation rate, which was associated with specific physicochemical properties of the maize grain.

Reasonable dry cultivation methods can balance yield and grain quality of rice

Reducing the water consumption of rice production in China without affecting grain yield and quality is an important challenge. The purpose of this study was to explore whether different dry cultivation methods could improve rice quality while balancing yield to maintain sustainable rice production. A japonica upland rice cultivar and a japonica paddy rice cultivar were cultivated in the field with three cultivation methods: plastic film mulching dry cultivation (PFMC), bare dry cultivation (BC), and continuous flooding cultivation (CF) as control. There was no significant difference in upland rice yield between PFMC and BC, and there was also no significant difference in paddy rice yield between PFMC and CF. Compared with CF, the two varieties yield decreased significantly with BC. Dry cultivation, especially PFMC, could decrease active filling period, chalky rice rate, chalkiness, amylose content, gel consistency, breakdown viscosity, ratio of glutelin to prolamin, leaf senescence, and increase water use efficiency, protein components content, setback viscosity, grain Q-enzyme activity and average filling rate. Compared with paddy rice, upland rice had lower yield, shorter active filling period, lower chalkiness grain rate and gel consistency, and higher amylose content, breakdown viscosity, protein components content and average filling rate. Grain Q-enzyme activity and grain filling parameters were closely related to rice quality. Reasonable dry cultivation methods could balance yield and quality, especially improve the nutritional and appearance quality of rice.

Effect of addition of pullulan on the properties of native/waxy corn starch‐based films

AbstractThis article reports on the preparation of native/waxy corn starch (NCS/WCS)‐based films with the addition of pullulan (PUL). Our study investigated the effects of varying amounts of PUL and amylose contents on the structure, mechanical and physicochemical properties of corn starch films. Notably, it was observed that WCS films with low amylose content exhibited superior transparency, while NCS films with high amylose content demonstrated enhanced tensile strength (up to 7.35 ± 0.18 MPa). Fourier transform infrared spectroscopy (FTIR) analysis indicated that the addition of PUL did not change the molecular interactions within the corn starch films. The X‐ray diffraction (XRD) results supported that the WCS films were amorphous, while the NCS film exhibited B‐type and V‐type crystals. Moreover, an increase in PUL content led to a gradual reduction in the crystallinity of both WCS films and NCS films. The addition of PUL improved the mechanical properties and oxygen barrier characteristics of these films but had an adverse impact on their water vapor barrier properties. These findings offer valuable insights for the selection of additives for corn starch film, which can further enhance the practical application potential of corn starch films in food and other industries.

Effects of Different Water Managements on Grain Yield and Grain Quality in Ratoon Rice Cultivation

Background: Ratoon rice production is one of the rice cultivation technologies with the potential to reduce labor and increase yield rate under a shorter cultivation time. However, few studies have focused on the effects of different water management on grain yield and quality. Objective: The aim of this study was to explore the effects of different water management on grain yield and quality in ratoon rice. Methods: Three water management treatments were followed- Control with the water level 5 cm aboveground, underground water treatment (UWT) with the water level 12 cm below the soil surface, and deep water treatment (DWT) with the water level 20 cm aboveground. The grain yield, yield components, amylose and protein content, and grain characteristics for grain quality were measured. Results: During the ratoon season, UWT had the highest grain yield of the three treatments. DWT had the highest ratoon tiller number but had a lower grain yield due to the increase in the number of ratoon tillers. The 1000-grain weight decreased markedly for DWT. With respect to grain quality, ratoon rice has a higher amylose content and a lower protein content than the main crop rice. UWT had the lowest protein content in the ratoon period and a higher grain yield. Conclusion: Yield performance in UWT is considered optimal for ratoon rice cultivation. However, grain quality under different water management did not show remarkable results. Therefore, the practice of fertilization during cultivation is recommended to improve grain quality.