High-throughput DNA Extraction Research Articles

Biopolymeric surface modified 96-well plates for equipment-free high-throughput DNA extraction and direct ACK-LAMP colorimetric detection of foodborne pathogen.

Ensuring the safety and high quality of food relies on promptly and clearly identifying foodborne diseases, including Salmonella. Nucleic acid testing plays an important role in ensuring food safety. Commercially available high-throughput molecular extraction technologies in-field application is limited as they are reliant on specialized and expensive equipment. The 96-well microplate recycling through biopolymer inner surface coating, was confirmed with FTIR, XRD, and XPS. Once optimized the DNA extraction protocol was equipment-free, user and eco-friendly while reducing sample contamination. Using the biopolymer microplate, the extraction and direct LAMP amplification of Salmonella spp. from milk samples were assessed. The gDNA had an average 260/280 ratio of 1.97, with a DNA yield of 16.88 ± 5.40 μg·mL-1 from 9 × 1010 CFU·mL-1Salmonella. Subsequently, using acid chrome K we visually detected the presence of Salmonella. The quantity of bacteria was correlated to the increase in the blue intensity of the color indicator. A detection limit of 1.54 CFU·mL-1 was achieved with good specificity and sensitivity in an equipment free setting. This study successfully established a 96-well plate-based high-throughput equipment free DNA extraction method. The methods enable the high-throughput extraction and amplification of 96 samples concomitantly within 1hr 30 min corresponding respectively to a total of 1536 and 768 samples within a working day treated by a researcher without the use of specialized and expensive equipment. The polymeric modified microplate was used for high-throughput DNA extraction and direct molecular amplification for pathogen detection. High-throughput DNA extraction no longer requires cumbersome equipment.

High-throughput DNA extraction strategy for fecal microbiome studies.

Next-generation sequencing (NGS) is a widely used method for determining the composition of the gut microbiota. Due to the differences in the gut microbiota composition between individuals, microbiome studies have expanded into large population studies to maximize detection of small effects on microbe-host interactions. Thus, the demand for a rapid and reliable microbial profiling is continuously increasing, making the optimization of high-throughput 96-format DNA extraction integral for NGS-based downstream applications. However, experimental protocols are prone to bias and errors from sample collection and storage, to DNA extraction, primer selection and sequencing, and bioinformatics analyses. Methodological bias can contribute to differences in microbiome profiles, causing variability across studies and laboratories using different protocols. To improve consistency and confidence of the measurements, the standardization of microbiome analysis methods has been recognized in many fields.

High-throughput DNA extraction and cost-effective miniaturized metagenome and amplicon library preparation of soil samples for DNA sequencing.

Reductions in sequencing costs have enabled widespread use of shotgun metagenomics and amplicon sequencing, which have drastically improved our understanding of the microbial world. However, large sequencing projects are now hampered by the cost of library preparation and low sample throughput, comparatively to the actual sequencing costs. Here, we benchmarked three high-throughput DNA extraction methods: ZymoBIOMICS™ 96 MagBead DNA Kit, MP BiomedicalsTM FastDNATM-96 Soil Microbe DNA Kit, and DNeasy® 96 PowerSoil® Pro QIAcube® HT Kit. The DNA extractions were evaluated based on length, quality, quantity, and the observed microbial community across five diverse soil types. DNA extraction of all soil types was successful for all kits, however DNeasy® 96 PowerSoil® Pro QIAcube® HT Kit excelled across all performance parameters. We further used the nanoliter dispensing system I.DOT One to miniaturize Illumina amplicon and metagenomic library preparation volumes by a factor of 5 and 10, respectively, with no significant impact on the observed microbial communities. With these protocols, DNA extraction, metagenomic, or amplicon library preparation for one 96-well plate are approx. 3, 5, and 6 hours, respectively. Furthermore, the miniaturization of amplicon and metagenome library preparation reduces the chemical and plastic costs from 5.0 to 3.6 and 59 to 7.3 USD pr. sample. This enhanced efficiency and cost-effectiveness will enable researchers to undertake studies with greater sample sizes and diversity, thereby providing a richer, more detailed view of microbial communities and their dynamics.

Implementation of a high-throughput whole genome sequencing approach with the goal of maximizing efficiency and cost effectiveness to improve public health.

Public Health Laboratories that implement whole genome sequencing (WGS) technologies may struggle to find the balance between sample volume and cost effectiveness. We present a method that allows for sequencing of a variety of bacterial isolates in a cost-effective manner. This report provides specific strategies to implement high-volume WGS, including an innovative, low-cost solution utilizing a novel quarter volume sequencing library preparation. The methods described support the use of high-throughput DNA extraction and WGS within budgetary constraints, strengthening public health responses to outbreaks and disease surveillance.

Development of a high-throughput DNA isolation method for livestock and poultry meat based on mesoporous metal-organic framework-coated solid-phase microextraction device

A rapid, portable, simple, low-cost, and high-throughput DNA isolation method was developed for the quantitative identification of meat adulteration based on mesoporous UiO-66 coated solid phase microextraction (SPME) devices. The high-throughput DNA extraction system consists of 96 UiO-66 SPME devices and a polyformaldehyde plate, which can extract DNA from 96 livestock and poultry meat samples simultaneously. At the same time, several parameters of the high throughput DNA isolation method were optimized, including lysis buffer volume, elution buffer volume, lysis time and elution time, etc. Compared with the single DNA isolation device, the 96-SPME high-throughput extraction system maintains the original good universality, reproducibility, chemical stability, and reusability. On this basis, it obtained higher DNA concentration (80 ± 34 ng μL−1), satisfactory DNA purity (A260/A280=2.4) and shorter extraction time (less than 7.2 s per sample), which are much more convenient and efficient than the conventional kit method and the single SPME DNA isolation method. In addition, the conventional multiplex polymerase chain reaction and real-time polymerase chain reaction techniques were used for the qualitative and quantitative detection of meat adulteration. The DNA obtained from this extraction method is highly reproducible and sensitive for the identification of duck ingredients in beef, with a detection range of 1–100 % and a minimum detection limit of 1 % (w/w).

New polymer brush-coated monodisperse magnetic nanoparticles prepared via interface-mediated RAFT polymerization for high-throughput DNA extraction from pathogen bacteria

Polymerase chain reaction (PCR) is gold-standard method for molecular detection of pathogens. DNA extraction from a complex biological medium is a crucial process for PCR based detection. Recently, magnetic nanoparticles-based methods are of great interest for genetic material isolation. In our work, we offer new magnetic nanoparticles based high-throughput DNA extraction method for pathogen detection in biofluids. For this purpose, first time polymer brush coated monodisperse magnetic nanoparticles were prepared with interface-mediated RAFT polymerization to be used in DNA extraction process. After synthesizing Fe3O4 nanoparticles, silica shell was coated on the magnetic nanoparticle core. Polymer brushes was immobilized on the amine functionalized silica layer using RAFT agent. Subsequently, the resulting particles with poly(vinylbenzyltrimethylammonium chloride) (PVBTAC) grafted were finalized through interface-mediated RAFT polymerization. The functional groups on the nanoparticles were characterized using FTIR spectroscopy. Size distribution and zeta potential analysis of the particles were performed by TEM and Zeta-sizer respectively. Adsorption and recovery studies of plasmid DNA were carried out on the polymer-coated magnetic nanoparticles. The developed particle provided both the rapid extraction of DNA and high-yield DNA recovery without requiring extended incubation and elution time. The maximum adsorption capacity was determined as 238.1 μg/mg. About 90 % of the input DNA was recovered. The total time of DNA extraction took just 20 min. We have successfully demonstrated the extraction of dsDNA of Enterococcus faecalis spiked to reference blood sample using the developed magnetic particles. The extracted plasmid DNA and dsDNA were confirmed by gel electrophoresis and qPCR methods respectively. The results showed that the proposed magnetic iron oxide nanoparticles (MIONp) will be a strong candidate for DNA extraction process from biological matrices.

Plasmid DNA extraction by double magnetic beads method and its application

Plasmids are the most commonly used gene carriers in the field of gene synthesis and sequencing. However, the main problems faced by traditional plasmid DNA extraction technology are low extraction throughput and high production cost, so they cannot meet the growing demand. In this study, a double-magnetic-bead method (DMBM) for plasmid extraction was developed based on the principle of plasmid extraction. The effects of the input of magnetic beads, the size of plasmid DNA fragments, and the volume of bacterial on plasmid DNA extraction were explored. In addition, the quality, throughput, and cost of plasmid DNA extraction were also compared between this technique and the commercial plasmid DNA extraction kits. The results showed that the DMBM can meet the needs of extracting plasmid DNA with different cell densities and fragment lengths. Moreover, the sensitivity and quality of plasmid extraction by the DMBM method were both superior to those of the centrifugal adsorption column method. In addition, this technique could be applied on a 96-channel automated nucleic acid extractor, resulting in higher purity of the extracted plasmid DNA, 80% reduction in extraction time, and 57.1% reduction in cost. It also reduces manual operations, achieving high-throughput and low-cost plasmid DNA extraction, thus may facilitate gene synthesis and sequencing.

Spatial and temporal dynamics of soybean gall midge (Resseliella maxima) parasitism by Synopeas maximum.

Soybean gall midge, Resseliella maxima Gagné (Diptera: Cecidomyiidae), is a pest that impacts soybean yield in the Midwest United States. While biological control using parasitoids may be a promising approach for managing this pest, it is crucial to have a deep understanding of parasitism dynamics to ensure effective implementation. We investigated R. maxima parasitism using a combination of three methods: rearing of field-collected hosts, dissection, and molecular assays. We confirmed parasitism of R. maxima by the recently described wasp Synopeas maximum Awad & Talamas (Hymenoptera: Platygastridae) and used our combinatorial approach to observe the spatial and temporal relationships between R. maxima and its parasitoid in the field. The number of R. maxima adults was greater in symptomatic plants on field edges than the field interior, but such a pattern was inconsistent for parasitism rates. Parasitism rates were generally highest early and late in the season, and lower in the middle of the season when the number of R. maxima was highest. In Minnesota, overall season-long parasitism rates of R. maxima were low (< 2%). To facilitate a wider investigation of the biological control of R. maxima, we designed a protocol for high throughput DNA extraction and quantitative polymerase chain reaction (qPCR) that can be used across a broader geography. Further research should evaluate how parasitism rates by Synopeas maximum could be promoted in production fields. © 2023 Society of Chemical Industry.

SPECIFIC PROBLEMS OF GENOMIC DNA EXTRACTION FROM PLANTS: WAYS FOR SOLUTION

In modern botanical studies, various molecular genetic methods such as genome sequencing, PCR, AFLP-analysis, etc. are often involved. These methods require the use of high-quality (i.e. well purified and non-degraded) genomic DNA. However, extraction of such DNA from plants is complicated by a wide spectrum of organic compounds that contaminate DNA and drastically reduce its quality. As a result, the protocols for DNA extraction from plants are usually labor-intensive, time-consuming and require expensive reagents, most of which are imported from abroad. In the case of high-throughput DNA extraction from plant material, these disadvantages are of a great importance, especially in view of the current import problems. Moreover, there is no universal protocol suitable for all plant species and all variants of plant material used: different protocols are effective in different cases and additional modifications are often required. Promising ways to overcome these problems include the search for simplified methods of plant DNA extraction, as well as the use of specially prepared initial material.

Evaluation of 96-well high-throughput DNA extraction methods for 16S rRNA gene metabarcoding.

Gaining meaningful insights into bacterial communities associated with animal hosts requires the provision of high-quality nucleic acids. Although many studies have compared DNA extraction methods for samples with low bacterial biomass (e.g. water) or specific PCR inhibitors (e.g. plants), DNA extraction bias in samples without inherent technical constraint (e.g. animal samples) has received little attention. Furthermore, there is an urgent need to identify a DNA extraction methods in a high-throughput format that decreases the cost and time for processing large numbers of samples. We here evaluated five DNA extraction protocols, using silica membrane-based spin columns and a 96-well microplate format and based on either mechanical or enzymatic lysis or a combination of both, using three bacterial mock communities and Illumina sequencing of the V4 region of the 16SrRNA gene. Our results showed that none of the DNA extraction methods fully eliminated bias associated with unequal lysis efficiencies. However, we identified a DNA extraction method with a lower bias for each mock community standard. Of these methods, those including an enzymatic lysis showed biases specific to some bacteria. Altogether, these results again demonstrate the importance of DNA extraction standardization to be able to compare the microbiome results of different samples. In this attempt, we advise for the use of the 96-well DNeasy Blood and Tissue kit (Qiagen) with a zirconia bead-beating procedure, which optimizes altogether the cost, handling time and bacteria-specific effects associated with enzymatic lysis.

Taxonomic Profiling of Fecal and Intestinal Microbiota in the African Turquoise Killifish Nothobranchius furzeri.

Killifish are emerging as a new laboratory system in which to study a range of questions, from the genetic basis of embryo dormancy to life history trait evolution, age-dependent neurodegeneration, and the connection between microbial community structure and biology of aging. Over the past decade, advances in high-throughput sequencing have helped uncover the vast diversity of microbial communities present in environmental samples and on host epithelia. Here, we describe an optimized protocol to study the taxonomic composition of intestinal and fecal microbiota in laboratory-raised as well as natural killifish populations and provide comprehensive step-by-step instructions for tissue sampling, high-throughput genomic DNA extraction, and the generation of 16S V3V4 rRNA and 16S V4 rRNA gene libraries.

An improved Shorea robusta genomic DNA extraction protocol with high PCR fidelity.

Shorea robusta (Dipterocarpaceae), commonly known as Sal, is an economically and culturally important timber species, known to contain a wide spectrum of polyphenols, polysaccharides, and other secondary metabolites in the tissues, which can interfere with the extraction of high-quality genomic DNA. In order to screen simple sequence repeat (SSR) markers and carry out other DNA-based analyses for this species in our laboratory, a high-throughput DNA extraction methodology was needed. Hence, we have optimized a simple, rapid, safe, and reliable high-throughput protocol for DNA extraction suitable for both fresh and dry leaves. The standardized protocol delivered good DNA yield of ∼1500 µg from 1 g of leaf tissue, with purity indicated by a 260 nm/280 nm absorbance ratio ranging from 1.70 to 1.91, which validated the suitability of extracted DNA and revealed reduced levels of contaminants. Additionally, the protocol that we developed was found to be suitable for polymerase chain reaction (PCR) amplification using microsatellite markers. Genome-wide characterization with SSR markers has been established in S. robusta, which further validates the protocol and its usefulness in DNA-based studies across the genus and/or family.

Penta-Primer Amplification Refractory Mutation System (PARMS) with Direct PCR-Based SNP Marker-Assisted Selection (D-MAS).

The penta-primer amplification refractory mutation system (PARMS) is a high-throughput, low-cost, and automated genotyping assay system that utilizes competitive allele-specific polymerase chain reaction (AS-PCR) combined with a homogeneous fluorescence-based reporting system to detect genetic variation occurring at single-nucleotide polymorphism (SNP). It is flexible in terms of the number of SNPs and samples to be analyzed, and the whole process only needs standard liquid handling, thermal cycling instruments, and plate reading instruments, which are present in many labs. Its compatibility with DNA samples prepared from a variety of sources and extraction technologies, such as alkaline lysis, makes it suitable for a direct PCR-based SNP marker-assisted selection system (D-MAS), a simple, cost- and labor-saving, and robust SNP genotyping system. It combines rapid and high-throughput DNA extraction through modified alkaline lysis with PARMS to dramatically reduce the time of manual operation and result analysis in the molecular breeding of major crops.

High-Throughput and Accurate Determination of Transgene Copy Number and Zygosity in Transgenic Maize: From DNA Extraction to Data Analysis.

It is vital to develop high-throughput methods to determine transgene copy numbers initially and zygosity during subsequent breeding. In this study, the target sequence of the previously reported endogenous reference gene hmg was analyzed using 633 maize inbred lines, and two SNPs were observed. These SNPs significantly increased the PCR efficiency, while the newly developed hmg gene assay (hmg-taq-F2/R2) excluding these SNPs reduced the efficiency into normal ranges. The TaqMan amplification efficiency of bar and hmg with newly developed primers was calculated as 0.993 and 1.000, respectively. The inter-assay coefficient of variation (CV) values for the bar and hmg genes varied from 1.18 to 2.94%. The copy numbers of the transgene bar using new TaqMan assays were identical to those using dPCR. Significantly, the precision of one repetition reached 96.7% of that of three repetitions of single-copy plants analyzed by simple random sampling, and the actual accuracy reached 95.8%, confirmed by T1 and T2 progeny. With the high-throughput DNA extraction and automated data analysis procedures developed in this study, nearly 2700 samples could be analyzed within eight hours by two persons. The combined results suggested that the new hmg gene assay developed here could be a universal maize reference gene system, and the new assay has high throughput and high accuracy for large-scale screening of maize varieties around the world.

Isolation of High-Molecular-Weight (HMW ) DNA from Fusarium oxysporum for Long-Read Sequencing.

In many instances Fusarium oxysporum genomes are complex and challenging to assemble mainly due to the increased number of repetitive elements and variable numbers of supernumerary chromosomes, which are primarily associated with pathogenicity. Hence, to obtain the accurate F. oxysporum genome assembly and high-resolution sequence information, protocols for versatile, reliable, and high recovery of high-quality DNA for diverse sequencing platforms are instrumental. Here, we describe two protocols for the isolation of DNA from isolates of F. oxysporum. One is a quick and easy method for high-throughput extraction of DNA to rapidly screen diverse isolates by marker-assisted PCR analysis. Another is to harvest high-quality and high-molecular-weight DNA for whole-genome sequencing. In addition, we also include a library preparation protocol optimized for the third-generation sequencing technology using the portable MinION device to obtain long-read sequences. These protocols can be potentially further applied for all Fusarium spp. and other fungal pathogens, including Verticillium.

A targeted amplicon sequencing panel to simultaneously identify mosquito species and Plasmodium presence across the entire Anopheles genus.

Anopheles is a diverse genus of mosquitoes comprising over 500 described species, including all known human malaria vectors. While a limited number of key vector species have been studied in detail, the goal of malaria elimination calls for surveillance of all potential vector species. Here, we develop a multilocus amplicon sequencing approach that targets 62 highly variable loci in the Anopheles genome and two conserved loci in the Plasmodium mitochondrion, simultaneously revealing both the mosquito species and whether that mosquito carries malaria parasites. We also develop a cheap, nondestructive, and high-throughput DNA extraction workflow that provides template DNA from single mosquitoes for the multiplex PCR, which means specimens producing unexpected results can be returned to for morphological examination. Over 1000 individual mosquitoes can be sequenced in a single MiSeq run, and we demonstrate the panel’s power to assign species identity using sequencing data for 40 species from Africa, Southeast Asia, and South America. We also show that the approach can be used to resolve geographic population structure within An. gambiae and An. coluzzii populations, as the population structure determined based on these 62 loci from over 1000 mosquitoes closely mirrors that revealed through whole genome sequencing. The end-to-end approach is quick, inexpensive, robust, and accurate, which makes it a promising technique for very large-scale mosquito genetic surveillance and vector control.

Extraction and Purification of DNA from Wood at Various Stages of Decay for Metabarcoding of Wood-Associated Fungi.

Assessment of endophytic and saprotrophic microbial communities from wood-extracted DNA presents challenges due to the presence of surface microbes that contaminate samples and plant compounds that act as inhibiting agents. Here, we describe a method for decontaminating, sampling, and processing wood at various stages of decay for high-throughput extraction and purification of DNA.

Cost-Effective and Time-Efficient Molecular Assisted Selection for PPV Resistance in Apricot Based on ParPMC2 Allele-Specific PCR

Plum pox virus (PPV) is the most important limiting factor for apricot (Prunus armeniaca L.) production worldwide, and development of resistant cultivars has been proven to be the best solution in the long-term. However, just like in other woody species, apricot breeding is highly time and space demanding, and this is particularly true for PPV resistance phenotyping. Therefore, marker-assisted selection (MAS) may be very helpful to speed up breeding programs. Tightly linked ParPMC1 and ParPMC2, meprin and TRAF-C homology (MATH)-domain-containing genes have been proposed as host susceptibility genes required for PPV infection. Contribution of additional genes to PPV resistance cannot be discarded, but all available studies undoubtedly show a strong correlation between ParPMC2-resistant alleles (ParPMC2res) and PPV resistance. The ParPMC2res allele was shown to carry a 5-bp deletion (ParPMC2-del) within the second exon that has been characterized as a molecular marker suitable for MAS (PMC2). Based on this finding, we propose here a method for PPV resistance selection in apricot by combining high-throughput DNA extraction of 384 samples in 2 working days and the allele-specific genotyping of PMC2 on agarose gel. Moreover, the PMC2 genotype has been determined by PCR or by using whole-genome sequences (WGS) in 175 apricot accessions. These results were complemented with phenotypic and/or genotypic data available in the literature to reach a total of 325 apricot accessions. As a whole, we conclude that this is a time-efficient, cost-effective and straightforward method for PPV resistance screening that can be highly useful for apricot breeding programs.

SILEX: a fast and inexpensive high-quality DNA extraction method suitable for multiple sequencing platforms and recalcitrant plant species

BackgroundThe use of sequencing and genotyping platforms has undergone dramatic improvements, enabling the generation of a wealth of genomic information. Despite this progress, the availability of high-quality genomic DNA (gDNA) in sufficient concentrations is often a main limitation, especially for third-generation sequencing platforms. A variety of DNA extraction methods and commercial kits are available. However, many of these are costly and frequently give either low yield or low-quality DNA, inappropriate for next generation sequencing (NGS) platforms. Here, we describe a fast and inexpensive DNA extraction method (SILEX) applicable to a wide range of plant species and tissues.ResultsSILEX is a high-throughput DNA extraction protocol, based on the standard CTAB method with a DNA silica matrix recovery, which allows obtaining NGS-quality high molecular weight genomic plant DNA free of inhibitory compounds. SILEX was compared with a standard CTAB extraction protocol and a common commercial extraction kit in a variety of species, including recalcitrant ones, from different families. In comparison with the other methods, SILEX yielded DNA in higher concentrations and of higher quality. Manual extraction of 48 samples can be done in 96 min by one person at a cost of 0.12 €/sample of reagents and consumables. Hundreds of tomato gDNA samples obtained with either SILEX or the commercial kit were successfully genotyped with Single Primer Enrichment Technology (SPET) with the Illumina HiSeq 2500 platform. Furthermore, DNA extracted from Solanum elaeagnifolium using this protocol was assessed by Pulsed-field gel electrophoresis (PFGE), obtaining a suitable size ranges for most sequencing platforms that required high-molecular-weight DNA such as Nanopore or PacBio.ConclusionsA high-throughput, fast and inexpensive DNA extraction protocol was developed and validated for a wide variety of plants and tissues. SILEX offers an easy, scalable, efficient and inexpensive way to extract DNA for various next-generation sequencing applications including SPET and Nanopore among others.

Comparison of various methods for DNA extraction from human isolated paraffin-embedded hydatid cyst samples.

Successful molecular research with reliable results depends on achieving significant and uniform amounts of genomic DNA from the parasite as the first and most basic step. Therefore, selection of an appropriate method that minimizes damage to the DNA of the parasite, is very important. In this study, we are going to describe a method that can extract DNA from human isolated paraffin-embedded hydatid cysts with a high quality and quantity. Formalin fixed and Paraffin-embedded hydatid cyst samples isolated from human lung and archived in the pathology laboratory were used for this purpose. Several sections of the paraffin blocks were prepared with 5 micron thickness and DNA were extracted by three different methods including; modified boiling, commercial kit and the method described by Larissa A. Pikor et al. The obtained DNA were evaluated by Nanodrop in terms of the yield of DNA and possible contaminations. To compare the quality of DNA prepared, cox1 region was amplified using specific primers. It was found that the DNA extracted by modified boiling had the lowest rate of contamination and the best electrophoretic band on the gel, compared to other two performed methods. Considering the findings of this study, this simple and high throughput DNA extraction method with high yield and quality can be recommended for extraction of DNA from formalin fixed and paraffin-embedded hydatid cysts.