Research on ancient Longquan wares and their imitations has attracted considerable attention. Using a series of experimental methods, including micro X‐ray fluorescence spectroscopy (μ‐XRF), X‐ray diffractometry (XRD), optical microscopy (OM), polarizing microscopy (PLM), dilatometry (DIL) and spectrophotometery, different samples of Longquan imitations from Dapu in Guangdong Province were collected and analysed. The study of different types of celadon from the Dapu kiln factories shows that the pale yellow body had a higher TFe2O3 content, and the body material must therefore have been treated differently or have come from a different source. The SiO2 and Al2O3 contents in the body can be used as auxiliary parameters to identify Longquan wares and its imitations. The study also found that both kinds of glaze recipe—including calcium–alkali glaze and alkali–calcium glaze—existed in the Dapu products, which suggested that while imitating Longquan ware, the potters in Dapu also showed innovation in the recipe for the glaze material. Moreover, there were some differences in the TFe2O3 content, as well as the size, number and distribution of bubbles in the different types of glaze. Finally, the study revealed that the material of both the saggars and separators were composed of another porcelain clay, different from that of the celadon body. In addition, the white and compact body of the celadon had a higher firing temperature, of 1140–1187 °C, compared with other types of wares, which had a lower firing temperature of 1050–1080 °C.