High Starch Research Articles

Multi-omics reveal mechanisms of high enteral starch diet mediated colonic dysbiosis via microbiome-host interactions in young ruminant

BackgroundAlthough rumen development is crucial, hindgut undertakes a significant role in young ruminants’ physiological development. High-starch diet is usually used to accelerate rumen development for young ruminants, but always leading to the enteral starch overload and hindgut dysbiosis. However, the mechanism behind remains unclear. The combination of colonic transcriptome, colonic luminal metabolome, and metagenome together with histological analysis was conducted using a goat model, with the aim to identify the potential molecular mechanisms behind the disrupted hindgut homeostasis by overload starch in young ruminants.ResultCompared with low enteral starch diet (LES), high enteral starch diet (HES)-fed goats had significantly higher colonic pathology scores, and serum diamine oxidase activity, and meanwhile significantly decreased colonic mucosal Mucin-2 (MUC2) protein expression and fecal scores, evidencing the HES-triggered colonic systemic inflammation. The bacterial taxa Prevotella sp. P4-67, Prevotella sp. PINT, and Bacteroides sp. CAG:927, together with fungal taxa Fusarium vanettenii, Neocallimastix californiae, Fusarium sp. AF-8, Hypoxylon sp. EC38, and Fusarium pseudograminearum, and the involved microbial immune pathways including the “T cell receptor signaling pathway” were higher in the colon of HES goats. The integrated metagenome and host transcriptome analysis revealed that these taxa were associated with enhanced pathogenic ability, antigen processing and presentation, and stimulated T helper 2 cell (TH2)-mediated cytokine secretion functions in the colon of HES goats. Further luminal metabolomics analysis showed increased relative content of chenodeoxycholic acid (CDCA) and deoxycholic acid (DCA), and decreased the relative content of hypoxanthine in colonic digesta of HES goats. These altered metabolites contributed to enhancing the expression of TH2-mediated inflammatory-related cytokine secretion including GATA Binding Protein 3 (GATA3), IL-5, and IL-13. Using the linear mixed effect model, the variation of MUC2 biosynthesis explained by the colonic bacteria, bacterial functions, fungi, fungal functions, and metabolites were 21.92, 20.76, 19.43, 12.08, and 44.22%, respectively. The variation of pathology scores explained by the colonic bacterial functions, fungal functions, and metabolites were 15.35, 17.61, and 57.06%.ConclusionsOur findings revealed that enteral starch overload can trigger interrupted hindgut host-microbiome homeostasis that led to impaired mucosal, destroyed colonic water absorption, and TH2-mediated inflammatory process. Except for the colonic metabolites mostly contribute to the impaired mucosa, the nonnegligible contribution from fungi deserves more future studies focused on the fungal functions in hindgut dysbiosis of young ruminants.256VYnm1kgM5kPxw6ZAn-oVideo

Analysis of genotype-by-environment effects on starch content in 281 Tartary buckwheat varieties and evaluation of the physicochemical properties of two elite varieties

Tartary buckwheat (TB) starch is a low-glycaemic-index food source. Analysis of genotype-by-environment effects on starch content is needed to improve high-quality TB production. However, an accurate and high-throughput evaluation method for starch content is a bottleneck for the analysis of genotype-by-environment effects on starch content. In the current study, a rapid and non-destructive method for detecting starch was developed based on near-infrared reflectance (NIR) spectroscopy. Overall, 281 varieties were planted in three environments for 2 years and measured. The coefficient of correlation between the laboratory-determined and NIR model-predicted starch content values was 0.9577. The average starch content of TB varieties had higher variants among the three environments. The genotype-by-environment interaction analysis showed the significant impact of environmental factors on TB starch content. Of them, two varieties (Ft155 and Ft184) with stable and relatively high starch contents (733.43 and 689.16 mg/g) were identified. The amylose content, structure character, thermal properties and pasting character revealed that these physicochemical properties of TB starch were distinct from those of potato and rice. Moreover, Ft155 was more difficult to gelatinise, and Ft184 has desired high-starch-quality cooking properties. These assessments provide robust nutritional quality evaluation approaches and food processing materials.

Nutritional Enhancement of Polimaize Lines: Integrating Native Mexican Maize Alleles into High-Yield Varieties

In this study, we evaluated Polimaize lines, named Polimaize, through the integration of alleles from the Native Blue Corn (NBC-JIQ), a local Mexican maize variety indigenous to the northeast region of Michoacán, Mexico, into elite maize lines curated by the International Maize and Wheat Improvement Center (CIMMYT). This crossbreeding aimed to enhance the nutritional profile of maize, particularly in terms of antioxidants and anthocyanins, which are scarce in elite lines. Our results demonstrated a significant increase in these compounds in the Polimaize lines, with variations due to heterosis. Despite these nutritional improvements, some traits showed decreased concentrations compared to parent lines, notably in sucrose and tryptophan, suggesting a potential trade-off. The study also found significant heritability in amino acids and tryptophan, while hexose sugars showed no substantial heritability. The Polimaize variety exhibited high starch content heritability, comparable to elite lines. Field trials confirmed Polimaize’s promising yield and agronomic traits, highlighting its potential for enhancing consumer health and contributing to sustainable agriculture through enriched crop nutritional quality. This project underscores the value of integrating local race alleles into elite lines, offering genetic diversity in maize cultivation.

Preparation and flocculation performance of a cationic starch based flocculant

Abstract To increase the specific surface area of corn starch and remove the anion contaminant in water, STP-OGG-DD, which is composed of porous corn starch (Stp), methylpropenoxyethyl trimethyl ammonium chloride (DMC) and dimethyldiallyl ammonium chloride (DMDAAC), was prepared and used for the flocculation of humic acid (HA). In this preparation, ferrous sulfate and hydrogen peroxide act as initiators for free radicals that attract cationic monomers to gather on starch chains. The effects of reaction time, reaction temperature, dosage of cationic monomer, and initiator on the reaction performance were investigated. The results showed that the conversion rate of starch monomer was 97.69 %, the grafting rate was 96.47 %, and the grafting efficiency was 95.85 %. Stp-OG-DD was characterized by scanning electron microscopy, and its structure was characterized by X-ray diffraction and infrared spectroscopy. In the flocculation test. The flocculation effect of 30 mg/L flocculants with different grafting rates on 30 mg/L humic acid was investigated, and the relationship between the two was studied. The results showed that the flocculant with a high starch grafting rate had a better removal effect on humic acid and was positively correlated. Different from the traditional gelatinization method, the enzymatic hydrolysis method is used to pretreat starch, which not only saves energy but also enlarges the specific surface area of molecules. In addition, adding two cationic monomers improved the grafting effect of starch. DMC and DMDAAC could be polymerized alternately onto the starch backbone, providing long molecular chains and abundant positive charge for enzymatic hydrolysis of starch molecular chains. In addition to exploring the grafting of samples under reaction conditions, flocculants prepared under different conditions were used to flocculate 30 mg/L humic acid to further determine the role of grafting rate in the removal effect.

Understanding the Interaction between Nanomaterials Originated from High-Temperature Processed Starch/Myristic Acid and Human Monocyte Cells.

High-temperature cooking approaches trigger many metabolically undesirable molecule formations, which pose health risks. As a result, nanomaterial formation has been observed while cooking and reported recently. At high temperatures, starch and myristic acid interact and lead to the creation of nanomaterials (cMS-NMs). We used a non-polar solvent chloroform to separate the nanomaterials using a liquid-liquid extraction technique. The physico-chemical characterization was carried out using dynamic light scattering (DLS), transmission electron microscopy (TEM), thermogravimetric analysis (TGA), and Fourier-transform infrared spectroscopy (FTIR). To determine the biological impact of these nanomaterials using different in vitro assays, including a cell viability assay, microscopic staining, and gene expression analysis, we adopted the THP-1 cell line as an in vitro monocyte model in our study. The TEM images revealed that fabricated cMS nanomaterials are smaller than 100 nm in diameter. There were significant concerns found in the cytotoxicity assay and gene expression analysis. At concentrations of 100-250 µg/mL, the cMS-NMs caused up to 95% cell death. We found both necrosis and apoptosis in cMS-NMs treated THP-1 cells. In cMS-NMs-treated THP-1 cells, we found decreased expression levels in IL1B and NFKB1A genes and significant upregulation in MIF genes, suggesting a negative immune response. These findings strongly suggest that cMS-NMs originated from high-temperature food processing can cause adverse effects on biological systems. Therefore, charred materials in processed foods should be avoided in order to minimize the risk of health complications.

Analysis of instability of starch-based Pickering emulsion under acidic condition of pH < 4 and improvement of emulsion stability

Starch-based Pickering emulsions exhibit high interfacial stability in a certain range of mild pH environments. On the contrary, many studies have reported that when the pH value is <4, it often leads to different degrees of emulsion instability. In this paper, the microscopic state of starch granules in the emulsion and its effect on the stability of the emulsion were observed and analyzed by atomic force microscope (AFM) in tapping mode. At the same time, Pickering emulsions in acidic environment were prepared by using the gel properties of methyl cellulose (MC) in synergy with esterified high amylose maize starch (M-HAMS) granules. The results show that in the emulsion with pH 3, the excessive H + ion inhibits the swelling of M-HAMS granules and prevents it from forming a stable gel structure, which is the main cause of emulsion instability. The polarity of MC with water contact angle (WCA) of 81.8° is similar to that of M-HAMS granules with WCA of 80.1°, and a uniform and ordered micro-nanostructure is formed in the aqueous phase. The prepared acidic (pH 3–4) emulsion has good stability during the observation period of 30 days.

Green and single-step simultaneous composite starch aerogel formation-high bioavailability curcumin particle formation

The high porosity and specific surface area of aerogels offer an ideal platform for loading bioactive molecules. In the present study, the microstructure of the bio-based starch aerogels was modulated by the incorporation of chitosan. The starch hydrogel precursors were prepared from high amylose corn starch in the presence of 0, 0.50, and 0.75 wt% chitosan. Afterward, a green single-step simultaneous aerogel formation-curcumin deposition method was applied to impregnate curcumin into the aerogels through supercritical carbon dioxide (SC-CO2) drying technology. Composite starch/chitosan aerogels showed a more open porous structure and lighter weight than the neat starch counterpart. Confocal microscopy and fluorescence spectroscopy analysis confirmed curcumin molecules' attachment to the aerogels' hydrophobic cavities. The impregnation capacity was 24–27 mg curcumin per gram of aerogel depending on the composition of the aerogels. The loading of curcumin in the aerogels significantly enhanced the bioaccessibility of curcumin in the simulated gastrointestinal fluid by almost 30-fold when compared to the unloaded curcumin. Furthermore, the bioaccessibility of the curcumin loaded in starch-chitosan composite aerogels was higher than that in neat starch aerogels. While unloaded curcumin showed an undetectable intestinal Caco-2 cell transportation, curcumin-loaded aerogels revealed a cumulative curcumin passing of 0.15–0.23 μg/mL.

In vitro rumen fermentation characteristics of bakery by-products containing high starch and sugar.

The objectives of this study were to evaluate the nutritional characteristics of bakery by-products (castella, pancake, baumkuchen) and their effect on rumen fermentation in vitro as compared with steam-flaked corn and barley as human-edible grains. The fermentation pattern of sugar and starch as pure components was also investigated. Additionally, rumen pH was evaluated using a low-capacity buffer. Bakery by-products contained high sugar (212-590 g/kg DM) and starch (262-545 g/kg DM). Castella exhibited the highest sugar content, whereas pancake and baumkuchen were rich in starch and ether extract within bakery by-products, respectively. The gas production rate at the early phase of incubation was higher in bakery by-products than in grains, and the highest in castella among all feeds. Bakery by-products produced higher total organic acids and propionate than grains. Bakery by-products also exhibited a lower rumen pH than grains during twenty-four hours of incubation with a low-capacity buffer. As pure components, sucrose showed a higher gas production rate and lower pH than starch. Overall, compared with grains, bakery by-products have the potential not only to supply more energy to ruminants but also decrease rumen pH because sugar and starch in bakery by-products ferment rapidly and produce higher organic acids in the rumen.

Tailoring 3D-printed high internal phase emulsion-rice starch gels: Role of amylose in rheology and bioactive stability

This study investigated the properties of 3D-printed high internal phase emulsion (HIPE)-rice starch gels, specially tailored for personalized nutrition by co-encapsulating resveratrol and β-carotene. We examined the influence of amylose content on various parameters, including functional groups, linear and nonlinear rheology, printed precision and microstructural stability. Additionally, we assessed the protective efficacy and release in vitro digestion of these gels on the encapsulated bioactive components. Compared to HIPE, HIPE-starch gels differently impacted by amylose content in starches. Low-level amylose weakened the network structure, attributed to amylose mainly responsible for gel formation and weak hydrogen bond interaction between the surface-active molecules and amylose due to gelatinized starch granules rupturing the protein network. Oppositely, high-level amylose led to denser, more gel-like structures with enhanced mechanical strength and reversible deformation resistance, making them suitable for 3D printing. Furthermore, 3D-printed gels with high-level amylose demonstrated well-defined structures, smooth surfaces, stable printing and less dimension deviation. They were also regarded as effective entrapping and delivery systems for resveratrol and β-carotene, protecting them against degradation from environment and damage under the erosion of digestive fluid. Overall, this research offers a straightforward strategy for creating reduced-fat HIPE gels that serve as the carrier for personalized nutraceutical foods.

High starch intake favours body weight control in neutered and spayed cats living in homes fed ad libitum.

Different starch-to-protein ratios were compared among neutered and spayed domiciled cats. Male and female obese and non-obese cats were fed kibble diets ad libitum for 4 months high in starch (HS (38 % crude protein (CP)): starch 32 %, protein 38 %; DM basis) or high in protein (HP (55 % CP): starch 19 %, protein 55 %) but similar in energy and fat in a crossover design. Physical activity was evaluated using an accelerometer, and body composition (BC), energy expenditure (EE) and water turnover (WT) using the doubly labelled water method. Results were compared in a 2 diet × 2 sex × 2 body condition factorial arrangement. Cats fed the HS (38 % CP) diet maintained a constant body weight, but lean mass (LM) tended to be reduced in female obese but to be increased in male non-obese (P < 0·08) and increased in female non-obese cats (P = 0·01). The HP (55 % CP) diet induced an increase in cat body weight and LM (P < 0·05) without altering BC proportion. EE tended to be higher in males (351 (se 8) kJ/kg0·67/d) than females (330 (se 8) kJ/kg0·67/d; P = 0·06), was unaffected by diet or BC, decreased as age increased (R 2 0·44; P < 0·01) and increased as physical activity increased (R 2 0·58; P < 0·01). WT was higher for the HP (55 % CP) diet (P < 0·01) and increased with EE (R 2 0·65; P < 0·01). The HS (38 % CP) diet favoured body weight control during 4 months of ad libitum feeding. Caution is necessary to balance protein in diets of female obese cats over 5 years, as they may have low energy and food intake, with LM loss.

Isolation and Characterization of Starch from Different Potato Cultivars Grown in Croatia

Starch is a polysaccharide that is widely used in food and other industries; therefore, due to its great potential, it is attempted to be maximally isolated from various foods rich in starch. Commonly, potatoes are used for starch production due to the relatively high starch content in tubers, and the process itself is complex and includes several steps. The aim of this study was to isolate and characterize starch from eight potato varieties. First, the basic chemical composition of the potato samples was determined, and then the isolation was carried out under laboratory conditions. The isolated starch was air dried, then ground and sieved through a 400 µm sieve. The basic chemical composition, amylose content, starch color, swelling capacity and solubility index, clarity of starch pastes, texture of starch gels and thermo-physical properties (gelatinization and retrogradation) were determined in the obtained starch samples. The results showed that the SL 13–25 potato variety had the lowest starch content, while the Stilleto variety had the highest starch content. The content of protein, fat, ash and crude fiber was relatively low in all of the isolated starches, indicating their high purity. Also, the difference in the color of the isolated starches was difficult to see. The highest amylose content had starch from Saprodi, while the lowest was observed in starch from SL 13–25. Starch from the cv. Dartiest had the highest, while starch from the cv. Sereno had the lowest gel strength. The starch of the cv. Dartiest also had the highest clarity value. The retrogradation transition temperatures and enthalpies were lower compared to the gelatinization temperatures and enthalpies. With the increasing temperature, both the swelling capacity and the solubility index of all the samples increased. According to the obtained differences, this study confirmed the significant influence and role of different cultivars on starch characteristics.

Practical implications of lowering dietary starch content on waste management in recirculating aquaculture systems operated with drum filtration or sedimentation in yellowtail kingfish (Seriola lalandi)

Dietary starch negatively affects faecal removal efficiency by sedimentation in yellowtail kingfish (Seriola lalandi). In general, research on waste management in recirculating aquaculture systems (RAS) is conducted on solid removal by sedimentation. However, most commercial farms operate with screen filtration. Compared to sedimentation, where the efficiency of removed faeces depends on faecal particle size and density, faecal removal by screen filtration is based on particle size and its stability. Accordingly, this study investigated the effect of dietary starch level on solid waste loading and faecal removal efficiency by different solid removal techniques, namely drum filtration and sedimentation. This was tested in six individual operating RAS over an experimental period of 47 days. The experimental period was divided into two consecutive phases (Phase 1 and Phase 2). During Phase 1 (42 days), the six independent RAS were operated with drum filtration, while during Phase 2 (5 days), the same RAS were operated with sedimentation. Two experimental diets, one with low starch (LS; 0% gelatinized wheat flour inclusion) and one with high starch (HS; 20% gelatinized wheat flour inclusion) levels, were formulated to test the effect of dietary starch level. HS diet negatively affected the apparent faecal waste production, apparent faecal removal efficiency by sedimentation, and the apparent amount of non-removed faeces. No dietary treatment effect was observed when RAS were operated with drum filtration. However, to achieve similar apparent faecal removal efficiency by drum filtration, the backwash frequency was on average 110% higher at HS RAS compared to LS RAS. This is likely to be related to both an increased apparent faecal waste production and the tendency for increased clogging of the drum filter screen at HS RAS throughout the experimental period. Overall, lowering dietary starch level has the potential to reduce solid loading (sedimentation) or improve drum filter performance (water usage) in RAS for yellowtail kingfish.

Assembly of spherical-shaped resistant starch nanoparticles to the oil droplet surface promotes the formation of stable oil in water Pickering emulsions

The use of starch-based nanoparticles in stabilizing Pickering emulsions has gained momentum since it offers a versatile, biocompatible, and sustainable approach with a wide range of applications. In the present study, starch nanoparticles produced using a sequential 3-step physical process were used as particle stabilizers to create Pickering emulsions. According to our results, high amylose starch nanoparticles can provide long-term colloidal stability to Pickering emulsions. The concentration of the particle-based stabilizer affected the size of the droplets, which in turn had an impact on the stability properties of the produced emulsions. By increasing nanoparticle concentration, surface and interfacial tension were reduced, providing the ability to the particles to adsorb at the interface. When starch and oil concentrations were compared using Dynamic Laser Scattering (DLS) and zeta potential, smaller droplets were produced by increasing starch amount and improved stability was depicted. Rheological profiles showed that the emulsion network structure was strengthened by the addition of nanoparticles, increasing the storage (G′) and loss (G″) moduli, as well as viscosity. In conclusion, the produced emulsions can be categorized as Pickering emulsion gels. These networks, specifically at starch nanoparticle concentration of 3% w/v and 5% w/v, have the advantage of preventing phase separation, droplet coalescence, and Ostwald ripening. The formation of a strong gel network was also obtained by Confocal Laser Microscopy (CLSM). All in all, this study provides new insights into the preparation and stabilization of starch-based Pickering emulsions, as the demand for sustainable and eco-friendly solutions in food product development is growing.

Gallic acid forms V-amylose complex structure with starch through hydrophobic interaction

This study aimed to investigate the role of amylose and amylopectin in the formation of starch-polyphenol complex and elucidate the interaction mechanisms. Gallic acid (GA) was used to complex with maize starch with various amylose contents. Results showed GA formed V-type crystals with normal maize starch (NMS) and high amylose maize starch (HAMS), while higher relative crystallinity was exhibited in HAMS-GA complexes than NMS counterparts. Molecular structure analysis revealed more amylose in GA-starch complexes than in treated starch counterparts without GA, and this was more apparent in HAMS than NMS, implying amylose is preferred to complex with GA than amylopectin. FTIR detected higher R1047/1022 value in starch-GA complexes than their starch counterparts without GA, suggesting increased short-range ordered structrure of complexes. Typical signatures of hydrophobic interactions were further revealed by isothermal titration calorimetry, indicating the complexation of GA to starch is mainly through hydrophobic bonds. More binding sites were observed for HAMS (72.50) than NMS (11.33), which proves the preferences of amylose to bind with GA. Molecular dynamics simulated the complexation of GA to amylose, and confirmed hydrophobic bond is the main interaction force. These findings would provide guidance for precise design and utilization of starch-polyphenol complexes in functional foods.

Investigation on chain segment motions of various starch molecules under different glycerol-water system

The molecular motion of starch at different glycerol concentrations (0, 20, 50, and 80 %) was investigated using Electron Paramagnetic Resonance (EPR) spectroscopy. Fourier-transform infrared (FTIR) spectroscopy and 1H nuclear magnetic resonance (1H NMR) spectroscopy confirmed that hydroxyl groups at the C2 and C3 positions of glucose units in corn starch (CS), waxy corn starch (WCS), and high amylose corn starch (HCS) were labeled with 4-amino-TEMPO. The crystallinities of CS, WCS, and HCS after spin-labeling decreased from 30.68 % to 3.21 %, 39.36 % to 1.65 %, and 28.54 % to 8.08 %, respectively. The pseudoplastic fluid properties of the spin-labeled starch remained shear-thin at different glycerol concentrations. EPR revealed the fast- and slow-motion components of the spin-labeled starch molecules dispersed in water. At a glycerol concentration of 20 %, the slow-motion component disappeared, indicating a faster rotational motion of the starch chain segments. As the glycerol concentration increased to 50 and 80 %, the rotational motion slowed because of high viscosity. In particular, the mobility of the spin-labeled WCS chains increased owing to easier access of glycerol and water to the branched structure. This study directly observed the dynamics of the molecular behavior of starch in glycerol-water systems.

Physicochemical and technofunctional properties of high Andean native potato starch

In the high Andean areas of Peru, a diversity of native potatoes improved at the germplasm level is grown, with higher nutritional and amylose quality, for use mainly in fries. The research aimed to evaluate the rheological behavior, thermal and technofunctional starch extracted from native potato varieties (Solanum tuberosum spp Andigena), cultivated in Andahuaylas, Peru. Native potatoes of the Azul Helada (AH) and Amarilla Reyna (AR) varieties were collected from the district of Champaccocha, Andahuaylas, Peru, and the starch was extracted by hydro extraction. The AH and AR starch in aqueous solution was observed to present dilatant behavior, with a behavior index of n > 1.0; represented by the Power Law and Herschel-Bulkley model, with low retrogradation speed. The starches reported gelatinization temperatures of 61.8 and 66.4 °C and melting of 132.2 and 133.5 °C, thermal degradation with mass losses of up to 89.90 and 86.16 %, 43.56 and 42.09 % of apparent amylose for HA and AR respectively. The solubility, swelling power, water adsorption capacity, oil absorption capacity, emulsifying capacity, and apparent density were higher for HA, with aw around 0.50. The color presented L* values > 95.17, and a whiteness index greater than 94.80. The ζ potential of the starches indicates medium stability, with a granule size of 42.17 and 57.67 nm. They also respond to type B with a degree of crystallinity of 58.95 and 43.12 % and a crystal size of 6.55 and 6.01 nm for AH and AR respectively. The native high Andean potato AH and AR are potential sources for starch extraction, with good techno-functional properties.

High dietary wheat starch negatively regulated growth performance, glucose and lipid metabolisms, liver and intestinal health of juvenile largemouth bass, Micropterus salmoides.

Largemouth bass (Micropterus salmoides) were fed with three diets containing 6%, 12%, and 18% wheat starch for 70days to examine their impacts on growth performance, glucose and lipid metabolisms, and liver and intestinal health. The results suggested that the 18% starch group inhibited the growth, and improved the hepatic glycogen content compared with the 6% and 12% starch groups (P < 0.05). High starch significantly improved the activities of glycolysis-related enzymes, hexokinase (HK), glucokinase (GK), phosphofructokinase (PFK), and pyruvate kinase (PK) (P < 0.05); promoted the mRNA expression of glycolysis-related phosphofructokinase (pfk); decreased the activities of gluconeogenesis-related enzymes, pyruvate carboxylase (PC), and phosphoenolpyruvate carboxykinase (PEPCK); and reduced the mRNA expression of gluconeogenesis-related fructose-1,6-bisphosphatase-1(fbp1) (P < 0.05). High starch reduced the hepatic mRNA expressions of bile acid metabolism-related cholesterol hydroxylase (cyp7a1) and small heterodimer partner (shp) (P < 0.05), increased the activity of hepatic fatty acid synthase (FAS) (P < 0.05), and reduced the hepatic mRNA expressions of lipid metabolism-related peroxisome proliferator-activated receptor α (ppar-α) and carnitine palmitoyltransferase 1α (cpt-1α) (P < 0.05). High starch promoted inflammation; significantly reduced the mRNA expressions of anti-inflammatory cytokines transforming growth factor-β1 (tgf-β1), interleukin-10 (il-10), and interleukin-11β (il-11β); and increased the mRNA expressions of pro-inflammatory cytokine tumor necrosis factor-α (tnf-α), interleukin-1β (il-1β), and interleukin-8 (il-8) in the liver and intestinal tract (P < 0.05). Additionally, high starch negatively influenced the intestinal microbiota, with the reduced relative abundance of Trichotes and Actinobacteria and the increased relative abundance of Firmicutes and Proteobacteria. In conclusion, low dietary wheat starch level (6%) was more profitable to the growth and health of M. salmoides, while high dietary starch level (12% and 18%) could regulate the glucose and lipid metabolisms, impair the liver and intestinal health, and thus decrease the growth performance of M. salmoides.

Effect of starch-based emulsion with different amylose content on the gel properties of Nemipterus virgatus surimi

The emulsion was prepared with peanut oil and corn starch with different amylose content using high-speed homogenization assisted high-pressure homogenization, and the effect of starch-based emulsion on the gel properties, whiteness, microstructure, protein secondary structure, chemical forces, texture and sensory properties of Nemipterus virgatus surimi was investigated. The results showed that high amylose corn starch was more beneficial to the stability of emulsion than normal and waxy starch. The gel strength, water holding capacity and texture properties of surimi were significantly improved by adding 10 % waxy corn starch-based emulsion or 15 % high amylose or normal corn starch-based emulsion. Moreover, the whiteness of surimi gel containing starch-based emulsion was higher, and the microstructure was more compact and delicate than that of surimi without emulsion. The addition of starch-based emulsion could increase the hydrophobic interaction and disulfide bond content, and promote the transformation of protein secondary structure to irregular direction. The sensory properties such as color, texture, taste and overall acceptability could be improved to varying degrees. Therefore, starch-based emulsion could be used to enhance the gel properties and nutritional value of surimi products.

Nutritional guide to feeding wheat and wheat co-products to swine: a review.

Inclusion of wheat grain can offer feeding opportunities in swine diets because of its high starch, crude protein (CP), amino acid (AA), and phosphorus (P) content. High concentrations of starch within wheat grain makes it a good energy source for swine. Mean energy content of wheat was 4,900 and 3,785 kcal/kg dry matter (DM) for digestible energy and metabolizable energy, respectively. CP concentration can vary based on the class of wheat which include hard red winter, hard red spring, soft red winter, hard white, soft white, and durum. The average CP of all wheat data collected in this review was 12.6% with a range of 8.5% to 17.6%. The AA concentration of wheat increases with increasing CP with the mean Lys content of 0.38% with a standardized ileal digestibility (SID) of 76.8%. As CP of wheat increases, the SID of AA in wheat also increases. Mean P of wheat was 0.27% and median P was 0.30%. Off-quality wheat is often associated with sprouts, low-test weight, or mycotoxin-contamination. Sprouted and low-test weight wheat are physical abnormalities associated with decreased starch within wheat kernel that leads to reductions in energy. The assumed energy value of wheat grain may need to be reduced by up to 10% when the proportion of sprouted to non-sprouted wheat is up to 40% whereas above 40%, wheat's energy may need to be reduced by 15% to 20%. Low-test weight wheat appears to not influence pig performance unless it falls below 644kg/m3 and then energy value should be decreased by 5% compared to normal wheat. Deoxynivalenol (DON) contamination is most common with wheat grain. When content is above the guidance level of 1mg/kg of DON in the complete diet, each 1mg/kg increase in a DON-contaminated wheat-based diet will result in a 11% and 6% reduction in ADG and ADFI for nursery pigs, and a 2.7% and 2.6% reduction in ADG and ADFI, in finishing pigs, respectively. Wheat co-products are produced from the flour milling industry. Wheat co-products include wheat bran middlings, millrun, shorts, and red dog. Wheat co-products can be used in swine diets, but application may change because of differences in the final diet energy concentration due to changes in the starch and fiber levels of each wheat co-product. However, feeding wheat co-products are being evaluated to improve digestive health. Overall, wheat and wheat co-products can be fed in all stages of production if energy and other nutrient characteristics are considered.

Quantitative and qualitative yield in sweet maize hybrids.

Today, sweet corn is considered an important vegetable due to its high sugar content and low starch content. Cluster analysis and variance analysis showed that hybrids had variations in yield indices. GB, DE and GS hybrids had similar performance on indices. SE hybrid that has significant performance on zeaxanthin. Biplot showed that fructose, glucose, sucrose and potassium had stability value on hybrids. All the hybrids had the best performance on fructose, glucose, sucrose and potassium factors. Factor biplot positively correlated with yield indices, including calcium, iron, zinc, magnesium, α-Carotene, 9Z-β-Carotene, phosphorus, and β-carotene. On the other hand, there is a positive correlation with fructose, glucose, potassium, lutein, sucrose, β-Cryptoxanthin, and zeaxanthin. So, to evaluate or increase lutein and zeaxanthin, the other parameters like sugar content (fructose, glucose, and sucrose) are important factors and have an effect together. Factor analysis and biplot showed that ME hybrid had a maximum performance on the first factor of yield indices. Also, the second factor of yield indices had a maxi-mum effect on NO hybrids. SE hybrids had maximum performance in zeaxanthin and GS hybrid had maximum performance in zinc, phosphorus, and iron. The dry matter had stability on DB hybrid.