High-speed Optical Coherence Tomography System Research Articles

9.4 MHz A-line rate optical coherence tomography at 1300\u2009nm using a wavelength-swept laser based on stretched-pulse active mode-locking

In optical coherence tomography (OCT), high-speed systems based at 1300 nm are among the most broadly used. Here, we present 9.4 MHz A-line rate OCT system at 1300 nm. A wavelength-swept laser based on stretched-pulse active mode locking (SPML) provides a continuous and linear-in-wavenumber sweep from 1240 nm to 1340 nm, and the OCT system using this light source provides a sensitivity of 98 dB and a single-sided 6-dB roll-off depth of 2.5 mm. We present new capabilities of the 9.4 MHz SPML-OCT system in three microscopy applications. First, we demonstrate high quality OCTA imaging at a rate of 1.3 volumes/s. Second, by utilizing its inherent phase stable characteristics, we present wide dynamic range en face Doppler OCT imaging with multiple time intervals ranging from 0.25 ms to 2.0 ms at a rate of 0.53 volumes/s. Third, we demonstrate video-rate 4D microscopic imaging of a beating Xenopus embryo heart at a rate of 30 volumes/s. This high-speed and high-performance OCT system centered at 1300 nm suggests that it can be one of the most promising high-speed OCT platforms enabling a wide range of new scientific research, industrial, and clinical applications at speeds of 10 MHz.

Feasibility of correlation mapping optical coherence tomography angiographic technique using a 200 kHz vertical-cavity surface-emitting laser source for in vivo microcirculation imaging applications.

Optical coherence tomography (OCT) angiography is a well-established in vivo imaging technique to assess the overall vascular morphology of tissues and is an emerging field of research for the assessment of blood flow dynamics and functional parameters such as oxygen saturation. In this study, we present a modified scanning-based correlation mapping OCT using a 200kHz high-speed swept-source OCT system operating at 1300nm and demonstrate its wide field-imaging capability in ocular angiographic studies.

Complex regression Doppler optical coherence tomography.

.We introduce a new method to measure Doppler shifts more accurately and extend the dynamic range of Doppler optical coherence tomography (OCT). The two-point estimate of the conventional Doppler method is replaced with a regression that is applied to high-density B-scans in polar coordinates. We built a high-speed OCT system using a 1.68-MHz Fourier domain mode locked laser to acquire high-density B-scans (16,000 A-lines) at high enough frame rates () to accurately capture the dynamics of the beating embryonic heart. Flow phantom experiments confirm that the complex regression lowers the minimum detectable velocity from to , whereas the maximum velocity of is measured without phase wrapping. Complex regression Doppler OCT also demonstrates higher accuracy and precision compared with the conventional method, particularly when signal-to-noise ratio is low. The extended dynamic range allows monitoring of blood flow over several stages of development in embryos without adjusting the imaging parameters. In addition, applying complex averaging recovers hidden features in structural images.

Multimodality endoscopic optical coherence tomography and fluorescence imaging technology for visualization of layered architecture and subsurface microvasculature.

Endoscopic imaging technologies, such as endoscopic optical coherence tomography (OCT) and near-infrared fluorescence, have been used to investigate vascular and morphological changes as hallmarks of early cancer in the gastrointestinal tract. Here we developed a high-speed multimodality endoscopic OCT and fluorescence imaging system. Using this system, the architectural morphology and vasculature of the rectum wall were obtained simultaneously from a Sprague Dawley rat in vivo. This multimodality imaging strategy in a single imaging system permits the use of a single imaging probe, thereby improving prognosis by early detection and reducing costs.

In vivo automated quantification of thermally damaged human tissue using polarization sensitive optical coherence tomography

Over the decades numerous technologies have been performed for the quantification of skin injuries, but their poor sensitivity, specificity and accuracy limits their applications. Optical coherence tomography (OCT) can be potential tool for the identification but the modern high-speed OCT system acquires huge amount of data, which will be very time-consuming and tedious process for human interpretation. Our proposed method opens the possibility of fully automated quantitative analysis based on morphological features of thermally damaged tissue, which will become biomarker for the removal of non-viable skin. The proposed method is based on multi-level ensemble classifier by dissociating morphological features (A-line, B-scan, phase images) extracted from Polarization Sensitive Optical Coherence Tomography (PS-OCT) images. Our proposed classifier attained the average sensitivity, specificity and accuracy is 92.22%, 87.2% and 92.5%, respectively, in detecting the thermally damaged human skin. Moreover, we show that our classifier is one of the best possible classifier based on features extracted from PS-OCT images, which demonstrates the significance of PS-OCT data in detecting abnormality in human skin.

Automated ablation of dental composite using an IR pulsed laser coupled to a plume emission spectral feedback system.

Dental composites are used as restorative materials for filling cavities, shaping, and covering teeth for esthetic purposes, and as adhesives. Dentists spend more time replacing existing restorations that fail than they do placing new restorations. Tooth colored restorations are difficult to differentiate from the surrounding tooth structure making them challenging to remove without damaging healthy tooth structure. Previous studies have demonstrated that CO2 lasers in conjunction with spectral feedback can be used to selectively remove composite from tooth surfaces. The purpose of this study is to assemble a system that is feasible for clinical use incorporating a spectral feedback system, a scanning system, articulating arm and a clinical handpiece and then evaluate the performance of that system on extracted teeth. In addition, the selectivity of composite removal was analyzed using a high-speed optical coherence tomography system that is suitable for clinical use. The system was capable of rapidly removing composite from small preparations on tooth occlusal surfaces with a mean loss of enamel of less than 20-μm.

High-speed OCT light sources and systems [Invited

Imaging speed is one of the most important parameters that define the performance of optical coherence tomography (OCT) systems. During the last two decades, OCT speed has increased by over three orders of magnitude. New developments in wavelength-swept lasers have repeatedly been crucial for this development. In this review, we discuss the historical evolution and current state of the art of high-speed OCT systems, with focus on wavelength swept light sources and swept source OCT systems.

Cerebral capillary velocimetry based on temporal OCT speckle contrast.

We propose a new optical coherence tomography (OCT) based method to measure red blood cell (RBC) velocities of single capillaries in the cortex of rodent brain. This OCT capillary velocimetry exploits quantitative laser speckle contrast analysis to estimate speckle decorrelation rate from the measured temporal OCT speckle signals, which is related to microcirculatory flow velocity. We hypothesize that OCT signal due to sub-surface capillary flow can be treated as the speckle signal in the single scattering regime and thus its time scale of speckle fluctuations can be subjected to single scattering laser speckle contrast analysis to derive characteristic decorrelation time. To validate this hypothesis, OCT measurements are conducted on a single capillary flow phantom operating at preset velocities, in which M-mode B-frames are acquired using a high-speed OCT system. Analysis is then performed on the time-varying OCT signals extracted at the capillary flow, exhibiting a typical inverse relationship between the estimated decorrelation time and absolute RBC velocity, which is then used to deduce the capillary velocities. We apply the method to in vivo measurements of mouse brain, demonstrating that the proposed approach provides additional useful information in the quantitative assessment of capillary hemodynamics, complementary to that of OCT angiography.

Single cardiac cycle three-dimensional intracoronary optical coherence tomography.

While high-speed intracoronary optical coherence tomography (OCT) provides three-dimensional (3D) visualization of coronary arteries in vivo, imaging speeds remain insufficient to avoid motion artifacts induced by heartbeat, limiting the clinical utility of OCT. In this paper, we demonstrate development of a high-speed intracoronary OCT system (frame rate: 500 frames/s, pullback speed: 100 mm/s) along with prospective electrocardiogram (ECG) triggering technology, which enabled volumetric imaging of long coronary segments within a single cardiac cycle (70 mm pullback in 0.7 s) with minimal cardiac motion artifact. This technology permitted detailed visualization of 3D architecture of the coronary arterial wall of a swine in vivo and fine structure of the implanted stent.

Retinal Blood Flow Response to Hyperoxia Measured With En Face Doppler Optical Coherence Tomography

PurposeTo use multiplane en face Doppler optical coherence tomography (OCT) to measure the change in total retinal blood flow (TRBF) in response to hyperoxia.MethodsOne eye of each healthy human participant (n = 8) was scanned with a commercial high-speed (70-kHz) spectral OCT system. Three repeated scans were captured at baseline and after 10 minutes of oxygen (hyperoxia) by open nasal mask. The procedure was performed twice on day 1 and once more on day 2. Blood flow of each vein was estimated using Doppler OCT at an optimized en face plane. The TRBF was summed from all veins at the optic disc. The TRBF hyperoxic response was calculated as the TRBF percent change from baseline.ResultsParticipants experienced a 23.6% ± 10.7% (mean ± standard deviation [SD]) decrease (P < 0.001, paired t-test) in TRBF during hyperoxia. The within-day repeatability of baseline TRBF was 4.1% and the between-day reproducibility was 10.9% coefficient of variation (CV). Between-grader reproducibility was 3.9% CV. The repeatability and reproducibility (pooled SD) of hyperoxic response were 6.1% and 6.4%, respectively.ConclusionsThe multiplane en face Doppler OCT algorithm was able to detect, in all participants, a decreased TRBF in response to hyperoxia. The response magnitude for each participant varied among repeated trials, and the averaging of multiple trials was helpful in establishing the individual response. This technique shows good potential for the clinical investigation of vascular autoregulation.

High-performance multi-megahertz optical coherence tomography based on amplified optical time-stretch.

As the key prerequisite of high-speed volumetric structural and functional tissue imaging in real-time, scaling the A-scan rate beyond MHz has been one of the major pursuits in the development of optical coherence tomography (OCT). Along with a handful of techniques enabling multi-MHz, amplified optical time-stretch OCT (AOT-OCT) has recently been demonstrated as a viable alternative for ultrafast swept-source OCT well above MHz without the need for the mechanical wavelength-tuning mechanism. In this paper, we report a new generation of AOT-OCT demonstrating superior performance to its older generation and all other time-stretch-based OCT modalities in terms of shot-to-shot stability, sensitivity (~90dB), roll-off performance (>4 mm/dB) and A-scan rate (11.5 MHz). Such performance is mainly attributed to the combined contribution from the stable operation of the broadband and compact mode-locked fiber laser as well as the optical amplification in-line with the time-stretch process. The system allows us, for the first time, to deliver volumetric time-stretch-based OCT of biological tissues with the single-shot A-scan rate beyond 10 MHz. Comparing with the existing high-speed OCT systems, the inertia-free AOT-OCT shows promises to realize high-performance 3D OCT imaging at video rate.

Visualization of dynamic boiling processes using high-speed optical coherence tomography

Investigating microscale nucleate boiling processes with high heat flux requires experimental visualization and quantification with high spatial resolution in the micrometer range as well as a sufficient temporal resolution. Numerous measurement techniques are employed for providing comprehensive experimental data on microscale boiling processes and other multiphase flows. In this context, optical coherence tomography (OCT) has been introduced recently for the visualization of quasistatic growing vapor bubbles in turbid fluids with a high spatial resolution. Since OCT detects backscattered light, only one optical access is necessary and OCT is feasible for measurements in turbid media, where other imaging techniques fail. Within this study, a high-speed OCT system is utilized for visualizing dynamic nucleate boiling processes at a heated surface with a frame rate of about 234 Hz. The bubble contour is extracted out of the OCT images using segmentation and tracking algorithm, which provide bubble contours and the course of the bubble area for individual vapor bubbles over time. Additionally, high-speed Doppler OCT imaging is presented revealing the velocity component of the fluid in beam direction up to 30 mm/s unambiguously. The present proof of principle study suggests high-speed OCT imaging as a promising and alternative technique for the simultaneous measurement of bubble geometries and fluid velocities in dynamic processes with a high spatial resolution of 16 µm. Due to the ongoing development and availability of ultra high-speed OCT systems, the perspective temporal resolution will be comparable to the frame rates provided by presently established techniques, such as particle image velocimetry or high-speed camera imaging.

Automated classification of optical coherence tomography images for the diagnosis of oral malignancy in the hamster cheek pouch.

Most studies evaluating the potential of optical coherence tomography (OCT) for the diagnosis of oral cancer are based on visual assessment of OCT B-scans by trained experts. Human interpretation of the large pool of data acquired by modern high-speed OCT systems, however, can be cumbersome and extremely time consuming. Development of image analysis methods for automated and quantitative OCT image analysis could therefore facilitate the evaluation of such a large volume of data. We report automated algorithms for quantifying structural features that are associated with the malignant transformation of the oral epithelium based on image processing of OCT data. The features extracted from the OCT images were used to design a statistical classification model to perform the automated tissue diagnosis. The sensitivity and specificity of distinguishing malignant lesions from benign lesions were found to be 90.2% and 76.3%, respectively. The results of the study demonstrate the feasibility of using quantitative image analysis algorithms for extracting morphological features from OCT images to perform the automated diagnosis of oral malignancies in a hamster cheek pouch model.

Simultaneously measuring the refractive index and thickness of an optical sample by using improved fiber-based optical coherence tomography

An improved structure for the optical coherence tomography (OCT) scheme based on a 4×4 fiber coupler for simultaneously measuring the refractive index and thickness of optical samples is presented. The proposed structure incorporates the optical path length difference of interference light and is used to calculate the refractive index and thickness of an unknown sample without any prior knowledge of the sample parameters. Two methods (time-domain and Fourier-domain OCT) of obtaining information about an unknown sample are proposed, and a high-speed high-resolution OCT system was developed.

200-kHz Swept Light Source Using a KTN Deflector and a High-speed Optical Coherence Tomography System

200-kHz Swept Light Source Using a KTN Deflector and a High-speed Optical Coherence Tomography System

Parafoveal Retinal Vascular Response to Pattern Visual Stimulation Assessed with OCT Angiography

We used optical coherence tomography (OCT) angiography with a high-speed swept-source OCT system to investigate retinal blood flow changes induced by visual stimulation with a reversing checkerboard pattern. The split-spectrum amplitude-decorrelation angiography (SSADA) algorithm was used to quantify blood flow as measured with parafoveal flow index (PFI), which is proportional to the density of blood vessels and the velocity of blood flow in the parafoveal region of the macula. PFI measurements were taken in 15 second intervals during a 4 minute period consisting of 1 minute of baseline, 2 minutes with an 8 Hz reversing checkerboard pattern stimulation, and 1 minute without stimulation. PFI measurements increased 6.1±4.7% (p = .001) during the first minute of stimulation, with the most significant increase in PFI occurring 30 seconds into stimulation (p<0.001). These results suggest that pattern stimulation induces a change to retinal blood flow that can be reliably measured with OCT angiography.

High-Speed Optical Coherence Tomography System Using a 200-kHz Swept Light Source with a KTN Deflector

We demonstrate a high-speed swept-source optical coherence tomography (SS-OCT) system, which is based on a high-speed swept light source and a Mach-Zehnder interferometer with a high-speed photodetector. The light source is an external-cavity laser tuned by a KTN electro-optic deflector, which exhibits a very fast response and large deflection. The scanning wavelength range is almost 80 nm up to 200 kHz with a ±400-V deflector driving voltage. The system acquires 1 mm × 1 mm images consisting of 200 × 200 pixels within few milliseconds. We present preliminary SS-OCT images of an in-vitro human nail and an in-vivo finger pad.

Noninvasive imaging of heart chamber in Drosophila with dual‐beam optical coherence tomography

The heart chamber of an adult Drosophila is approximately 2 mm long and 0.5 mm wide, and the interwall separation of different heart portions during systole and diastole range from tens of micrometers to hundreds of micrometers. Furthermore, the heart chamber has a curved structure, which results in the larger differences in depth between the different heart portions. However, applying the wavelength calibration process before Fourier transform in an optical coherence tomography (OCT) system may cause degradation in system sensitivity and longitudinal resolution when the optical path difference between the reference and sample arms increases, which makes imaging the entire heart chamber difficult with OCT system. Additionally, since the heartbeat rate of Drosophila is approximately 6 beats/s, a high-speed OCT system is necessary to record the dynamics of the heat beats. In this study, we propose a new approach to visualize the entire heart chamber including the conical chamber and four ostia portions, and to observe the retrograde and anterograde beats. A buffered Fourier-domain mode-locked (FDML) laser is implemented to provide a high imaging speed. Two output ports of the buffered FDML laser are used simultaneously to scan the different heart portions of Drosophila, and the effective A-scan rate of the OCT system can be doubled. Then, the two scanned images are merged into a single B-mode scan. Furthermore, with dual-beam OCT system, the beating behaviors of the different heart portions from 7-day-old and 21-day-old flies are compared.

Fourier domain mode locking at 1050 nm for ultra-high-speed optical coherence tomography of the human retina at 236,000 axial scans per second

A Fourier domain mode-locked (FDML) laser at 1050 nm for ultra-high-speed optical coherence tomography (OCT) imaging of the human retina is demonstrated. Achievable performance, physical limitations, design rules, and scaling principles for FDML operation and component choice in this wavelength range are discussed. The fiber-based FDML laser operates at a sweep rate of 236 kHz over a 63 nm tuning range, with 7 mW average output power. Ultra-high-speed retinal imaging is demonstrated at 236,000 axial scans per second. This represents a speed improvement of approximately10x over typical high-speed OCT systems, paving the way for densely sampled volumetric data sets and new imaging protocols.

Three-dimensional Imaging of the Foveal Photoreceptor Layer in Central Serous Chorioretinopathy Using High-speed Optical Coherence Tomography

To describe the 3-dimensional (3-D) imaging of the pathologic changes in the foveal photoreceptor layer in eyes with central serous chorioretinopathy (CSC) using high-speed optical coherence tomography (OCT). Prospective observational case series. Twenty-seven eyes of 27 consecutive patients with various stages of CSC. A prototype high-speed OCT system was fabricated for patient examinations based on Fourier domain OCT. The system had a sensitivity of 98 dB, a tissue axial resolution of 4.3 mum, and an acquisition rate of approximately 18700 axial scans per second. Three-dimensional imaging was performed based on a raster-scan protocol. Anatomic features of CSC distinguished by 3-D OCT. A line corresponding to backreflection from the external limiting membrane (ELM) was visible in images from eyes with all stages of CSC, including 6 in the acute, 5 in the chronic, and 9 in the recurrent phase of retinal detachment and 11 examined in the quiescent phase (including 4 reexamined after reattachment). Backreflection from the photoreceptor inner and outer segment junction (IS/OS) was missing before but present after reattachment. The ELM line bordered the photoreceptor nuclear and inner segment layers, clearly showing that CSC primarily alters the outer segment (OS) layer. Punctate areas of intense reflectivity were observed more frequently in the OS layer of detached retinas in cases of chronic or recurrent versus acute CSC (P<0.05, chi-square test). Of 11 eyes with reattached macula, 3 eyes with large defects in the subfoveal IS/OS had poor visual acuity (VA), and 8 eyes with small or no defects had good VA (P<0.05 and P<0.001, chi-square test). Decreases in foveal full and outer thickness were associated with VA loss (P<0.05 and P<0.001, Spearman rank correlation test). Three-dimensional OCT imaging delineates the microstructural changes that occur within the photoreceptor layers and demonstrates the spatial relationship between the laterally spreading or scattering microstructures and the fovea in eyes with CSC. Visualization of the 3-D relationship between the ELM and each photoreceptor layer before and after macular reattachment facilitates understanding of anatomic and vision changes that result from CSC.