High-speed Response Research Articles

Pengaruh Kualitas Pelayanan dan Kecepatan Respons Terhadap Kepuasan Pelanggan di Restoran Marugame Udon

This research aims to analyze the influence of service quality and response speed on customer satisfaction at Marugame Udon restaurant. Through a literature review, this study examines various theories and previous research related to service quality, response speed, and customer satisfaction. The findings indicate that both service quality, which includes tangibles, reliability, responsiveness, assurance, and empathy, as well as response speed in serving customers, have a significant impact on customer satisfaction. Good service quality and high response speed can enhance customers' perception of the value offered by the restaurant and encourage customer loyalty. The implication of this research is the importance for the restaurant to continuously strive to improve service quality and response speed in order to maintain and enhance customer satisfaction

Amp-Holo-Net enables speckle-free and high-quality coaxial amplitude-only holographic display

At present, amplitude-only holograms (AOH) are widely applied because of the high response speed and small pitch of amplitude spatial light modulators. However, AOHs are generally generated by traditional diffraction theories, and there are no effective deep learning algorithms to generate high-quality coaxial AOHs, which makes it difficult to achieve speckle-free, high-quality holographic displays using amplitude spatial light modulators. Thereby, we propose two cascaded deep neural networks, embedding physical models of the coaxial AOH to generate speckle-free and high-quality coaxial AOHs within an acceptable time, named Amp-Holo-Net, which is the first work that introduces deep learning to generate coaxial AOHs. We demonstrate the superiority of the proposed method through simulation, achieving an 81% reduction in speckle contrast of two-dimensional (2D) monochrome reconstruction and a 60% improvement in peak signal-to-noise ratio of 2D color reconstruction compared with point source method, and optical experiments are conducted to verify the validity of the proposed method. We believe our method fills the blank of AOH algorithms and paves the way for holographic displays based on amplitude spatial light modulators.

The clearing strategy of primary frequency control ancillary services market from the point of view ISO in the presence of synchronous generations and virtual power plants based on responsive loads

Since the increase in penetration of renewable energy sources connected to the system reduces the inertia of power systems, the penetration of these sources leads to increase in the requirements of primary frequency control (PFC) services. Fortunately, with the expansion of network intelligence platforms, responsive loads (RL) can be effectively useful in ancillary services in the near future and can be used like traditional power plants. Since these equipment have a high rate of change of status, if they are visible in the market by aggregating (with virtual power plant (VPP)), they can compete with synchronous generations (SG). Because the response speed of the participants in the market can affect the decision independent system operator (ISO) in determining the winning units, therefore in this article, we have proposed a market framework to create competition between SGs and VPPs in providing ancillary services. In the proposed framework, ISO minimizes the weighted sum of power purchase costs from VPPs and SGs. The proposed weighting coefficients express the response speed of each unit. In fact, the desired objective function is affected by two terms, cost and speed. The presented model has been simulated on a test system including four SGs units and one VPP unit in matrix laboratory (MATLAB) software and checked under five different scenarios. The comparison of the obtained results indicates an increase in the possibility of accepting units with a smaller weighting factor and a higher response speed (the meaning of accepting units are market players, i.e. SGs and VPPs).

Сенсомоторна реакція представників ігрових видів спорту при різній моторній відповіді на подразники

Smoothing or emphasizing on laterality of movements in athletes depends on the specifics of the sport and determining perceptual-motor abilities. Individual motor features. Their consideration in the process of sports training is impossible without knowledge of the presence and degree of manifestation of motor asymmetry, which will affect the sports result. Objective: to establish the peculiarities of sensorimotor response of athletes of game sports in comparison with representatives of cyclic sports and martial arts at different motor response to stimuli. Material and methods: student-athletes of game, cyclic sports and martial arts at the age of 18-23 years were studied. The study was conducted according to the diagnostic training method ReactionX: sensorimotor response to audiosensory stimuli of Standard and Sequence programs in Close and Far distance conditions. Results: data of sensorimotor reaction of representatives of game, cyclic sports and martial arts in different conditions of stimuli presentation and motor response were obtained. Separate comparisons of indicators of sensorimotor component of readiness by reaction speed and perceptual-cognitive component by the number of processed signals of representatives of game sports with other groups of athletes were made. The statistical reliability of comparison of the studied parameters is shown and the value of the difference of indicators is presented. Conclusions: the peculiarities of the sensorimotor response of representatives of game sports consisted in a higher speed of response and a greater number of perceived and processed signals at a remote response with the right (dominant) hand in the program of random stimulus presentation. In contrast, the peculiarity of sensorimotor reaction of representatives of cyclic sports and martial arts was the highest number of perceived and processed signals at a remote response with the right hand in the program with a sequential order of presentation of signals. Perceptual-motor symmetry was found in athletes, regardless of specialization, when responding to the sequential order of appearance of signals as opposed to their arbitrary presentation.

Multimodal flexible electronic skin with adjustable module size for robot collision detection

Purpose This paper aims to present a modular multimodal flexible electronic skin that can be used for robot collision detection in human–robot interactions. This type of electronic skin will meet the requirements of performance indicators such as sensing mode, sensing domain coverage and dynamic data update rate in human–robot interactions. Design/methodology/approach The electronic skin uses a modular architecture, and the sensing module is designed to be adjustable in size so that it can be easily deployed on complex robot surfaces, increasing area coverage, reducing power consumption, and improving data update rates. Findings The authors evaluated electronic skin through experiments using a UR5 robot. Electronic skin has high static scene perception differentiation and dynamic scene perception abilities. Moreover, the robot realizes a high-speed collision response based on the electronic skin proposed in this study. Originality/value The proposed electronic skin provides crucial technical support for advancing robotic technologies, and holds promising prospects for industrial applications.

Optimal design and experimental testing of EMPI system for plasma disruption mitigation on J-TEXT

Plasma disruptions can cause significant damage to tokamak. Currently, the primary method for mitigating disruptions is the injection of a substantial amount of impurities. The electromagnetic injection method offers a high injection speed and rapid response time, making it a promising technique for impurity injection. The first Electromagnetic Pellet Injection System (EMPI), developed by the J-TEXT team, is capable of launching pellets at high velocities and features a specialized deceleration rail that ensures safe separation of the armature and pellet. However, this system lacks an armature recovery device and a vacuum system. In this work, a second generation EMPI has been developed, which has a vacuum system and a curved recovery rail. The curved recovery rail facilitates the smooth retrieval of the armature, enhancing the safety of the recycling process. Additionally, this new system employs an augmented rail design that improves launch performance. Test results indicate that the maximum current of the new EMPI has been reduced by approximately 60%, while the maximum launch speed has increased by around 20%.

Mass‐Producible Self‐Powered Solar‐Blind Ultraviolet Photodetector Based on Graphene/β‐Ga2O3 Heterojunction Processed by Wet Transfer

AbstractGraphene electrodes draw considerable attention in solar‐blind ultraviolet (SBUV) detection owing to their unique features including high ultraviolet (UV) transparency and superior intrinsic carrier mobilities. However, their adoption comes with challenges, as the most commonly used preparation technique, i.e., the dry transfer process, is challenging to achieve mass production. In this work, graphene/β‐Ga2O3 heterojunction photodetectors processed by wet transfer are reported. Benefiting from the UV‐transparent electrode and heterojunction, both the responsivity and response speed are improved. The characteristic of the graphene/β‐Ga2O3 interface is analyzed by the current–voltage (I–V) and capacitance–voltage (C–V) curves, featuring a high‐quality junction. Operated at zero bias, the photodetector exhibits a low dark current of less than 1 pA and a high response speed of less than 1 ms. An excellent UV‐C/visible rejection ratio is also achieved. Importantly, the photodetector performs excellent reproducibility and performance stability. This results provide a new perspective for the mass production of graphene/Ga2O3 integrated devices, enabling high‐performance Ga2O3 photodetector arrays.

Intrinsic charge manipulation for solution‐processed organic photodetectors with high sensitivity and fast response

AbstractCharge manipulation is crucial in optoelectronic devices. The unoptimized interfacial charge injection/extraction in solution‐processed bulk‐heterojunction (BHJ) organic photodetectors (OPDs) presents significant challenges in achieving high detectivity and fast response speed. Here, we first develop an approach for intrinsic charge manipulation induced by molecularly engineered donors to block electron injection and facilitate hole extraction between the indium tin oxide (ITO) transparent anode and the photoactive layer. By utilizing a polymer donor with 3,4‐ethylenedioxythiophene (EDOT) as the conjugated side chain, a polymer‐rich layer forms spontaneously on the ITO substrate due to the increased oxygen interactions between ITO and EDOT. This results in electron‐blocking‐layer (EBL)‐free devices with lower dark current and noise without a reduction in responsivity compared to control devices. As a result, the EBL‐free devices exhibit a peak specific detectivity of 2.36 × 1013 Jones at 950 nm and achieve a −3 dB bandwidth of 30 MHz under −1 V. Enhanced stability is also observed compared to the devices with poly(3,4‐ethylenedioxythiophene) polystyrene sulfonate (PEDOT:PSS). This work demonstrates a new method to intrinsically manipulate charge injection in BHJ photoactive layers, enabling the fabrication of solution‐processed EBL‐free OPDs with high sensitivity, rapid response, and good stability.

Fixed Switching Frequency Model Predictive Control and Passivity Based Control for DC-DC Converter

The DC-DC converter represents a crucial component in the renewable energy sources. The stability and dynamic capability enhancement of the DC/DC converter have emerged as a significant research topic in the current era. Model predictive control (MPC) is particularly prevalent due to its high dynamic response speed, simplicity of the controller design, and capacity for multi-objective optimization. However, the traditional finite control set model predictive control (FCS-MPC) method is suffer to variable switching frequency and vast computing. To improve the dynamic performance of the converter, a novel nonlinear control strategy named fixed switching frequency MPC and passivity-based control (PBC), named FSFPBMPC, is proposed, which could achieve fixed switching frequency and enhance the system's dynamic response speed. Firstly, the Euler-Lagrange (EL) model of the boost converter is established. Secondly, the relationship between duty cycle and MPC is established. Ultimately, the output voltage of PBC is incorporated into the cost function of the FCS-MPC. The characteristics of PBC power shaping and damping injection can enhance the system's immunity to interference, improve the system's dynamic response speed, and thus reinforce the system's stability. Then, depending on MATLAB, the simulation results proved that the proposed strategy has the same effect as we expected.

Modeling and simulation of nonlinear dynamical systems for biosensor sensitivity based on carbon nanocomposites

Nanomaterials have a wide range of applications in various fields of scientific research due to their unique physical and chemical properties. With the rapid development of science and technology, nanocomposites synthesized from various nanoparticles have obtained many excellent properties due to their synergistic effects. In this paper, a series of carbon-based nanomaterials are proposed for in-depth research, and corresponding biosensors are constructed. In this study, ECL biosensors based on a variety of nanocomposite materials will be used to detect and analyze cells, and also detect other cells that are similar to cells. The experimental data show that the relative standard deviation of the detection results of the two methods is within 8%, and the sensor has high sensitivity, excellent stability and fast response speed. The sensor showed excellent performance in the repeatability test, and the relative standard deviation of repeated detection was less than 2%. This result shows that the sensor has highly consistent detection capabilities, providing important support for its reliability in practical applications. By adding the description of repeatability data, the summary more comprehensively reflects the performance advantages of the sensor.

Ultrathin Ga2O3 Photodetector with Fast Response and Trajectory Tracking Capability Fabricated by Liquid Metal Oxidation.

Low-dimensional Ga2O3 demonstrates a unique ultraviolet photoresponse and could be used in various electronic and optical systems. However, the low-dimensional Ga2O3 photodetector is faced with the challenges of a complex preparation process and poor device performance. In this work, ultrathin Ga2O3 layers with ∼7 nm thickness are prepared on quartz rods by UV exposure to liquid gallium. Benefiting from low-density oxygen vacancy defects cured by UV exposure, the low-dimensional Ga2O3 photodetector exhibits a high response speed (rise: 64.7 μs; fall: 51.4 μs) and an exceptional linear dynamic range of 120 dB. Furthermore, the photodetector array based on these ultrathin Ga2O3 shows an effective trajectory tracking capability by monitoring UV source motion. This work develops a simple preparation method to construct a low-dimensional UV photodetector array with fast response and useful trajectory tracking capability, exhibiting the significance of ultrathin Ga2O3 in UV optoelectronics.

Biomimetic Transparent Slippery Surface for the Locomotion of Photocontrol Droplets and Bubbles.

Directed transportation and collection of liquids and bubbles play a vital role in the survival of ecosystems. Among them, the optical response control is widely used in the fields of microfluidic chips and chemical synthesis because of its high remote operation and fast response speed. However, due to poor light transmission, the development direction of traditional near-infrared (NIR) absorbing materials in the field of visualization is limited, and there are few reports of manufacturing an operating platform that can realize the directional movement of droplets/bubbles on a single platform. Here, a transparent photo-responsive PBFS platform is prepared for droplet and bubble manipulation by coating the etched glass substrate with Prussian blue (PB) nanocubes. When near-infrared (NIR) irradiation on the PBFS platform, PB nanocubes trigger heat production by photothermal means, due to the action of Marangoni force, the surface tension on the left and right sides of the droplets and bubbles is not uniform, forming a surface tension gradient, thereby driving the movement of the droplets and bubbles. The control platform has good application potential in the field of microchemical reaction and biomedical engineering and brings new solutions to the field of transparent photothermal materials.

Ultra-broadband Photodetectors Based on Formamidinium Lead Iodide Quantum Dots

Near-infrared photodetectors were fabricated by incorporating formamidinium lead iodide (FAPbI3) quantum dots (QDs) as the light-harvesting layer. Through systematic optimization of the device architecture, high device performance was achieved by utilizing PCBM as the electron transport material and a 50 nm-thick TAPC film as the hole transport layer. The energy level alignment between PCBM and the FAPbI3 QDs enabled efficient exciton dissociation and hole blocking, while the optimized TAPC thickness decrease current leakage pathways. The resulting photodetectors exhibited an impressive external quantum efficiency of 59.56 % at 750 nm, along with a high specific detectivity of 2.63 x 1011 Jones. A broadband photoresponse from 300–900 nm was observed, as well as a fast temporal response with 30.58/31.26 μs rise/fall times. A substantial linear dynamic range of 61.5 dB was achieved under 780 nm illumination. Furthermore, the low dark current densities facilitated by the judiciously selected materials and thicknesses contributed to the excellent overall device performance. The device performance of the PCBM/FAPbI3 QDs/TAPC system demonstrate its promising potential for near-infrared optoelectronic applications requiring high sensitivity, speed, and broad spectral response, opening up opportunities for further advances in photodetection as well as other relevant device technologies.

Ag nanoparticles at p-Si/ MAPbI3 perovskite interface: improved photo responsivity and response speed in photodetection

Although enhanced performances of photovoltaic devices by embedding metal nanoparticals in charge transport layer, doping into active layer bulk, decorating the active layer surface, and inserting at the interface between semiconductor and the electrode were reported, the effect of incorporating metal NPs at the interface of single crystal semiconductor and perovskite is rarely tackled. Herein the effects of incorporating Ag nanoparticals (AgNPs) at p-Si/MAPbI3 perovskite interface on the photodiode performances were investigated. The results showed that compared with reference device (without AgNPs) the photoresponsivity of the device incorporating AgNPs is greatly improved with the exception for light with wavelengths fall in the spectral range where AgNPs have strong optical absorption. This effect is extremely significant for relatively shorter wavelengths in visible region, and a maximal improvement of around 10.6 times in photoresponsivity was achieved. The physical origin of the exception for spectral range that AgNPs have strong optical absorption is the cancelation of scatter resulted enhancement through AgNPs by band-to-band absorption resulted reduction of photocurrent, in which the generated electron has energy near the fermi level and the hole has large effective mass, which relax by nonradiative recombination, thus making not contribution to the photocurrent. More importantly, the AgNP decorated device showed much faster photo response speed than reference device, and a maximal improvement of around 7.9 times in rise and fall time was achieved. These findings provide a novel approach for high responsive and high speed detection for weak light.

2D Gr/WSe2/MoTe2 vertical heterojunction for self-powered photodiode with ultrafast response and high sensitivity

Two-dimensional materials without lattice constraints can be combined into form heterojunctions via van der Waals forces, providing opportunities for the future development of novel high-performance photodetectors. In non-vertical heterojunction devices with long carrier transport channels, SRH recombination due to defect and interface states in the heterojunction and Langevin recombination due to Coulomb interactions induce large amounts of photogenerated carrier recombination, leading to low quantum efficiencies of the heterojunction. At the same time, defect and interface trap states, as well as the long channel of the non-vertical heterojunction device, lead to a slow response speed of the device. In this work, a 2D WSe2/MoTe2 vertical heterojunction photodiode with a transparent graphene top electrode has been designed to simultaneously achieve high sensitivity and fast response speed of photodetectors. Benefiting from the vertical device structure, high-quality interface and low contact resistance, the photogenerated electron-hole pairs can be efficiently separated and transported. The photodiode exhibits remarkable rectification characteristics with a rectification ratio as high as 1.4 × 104, and provides a broadband and self-powered photodetection from the visible to NIR bands (405–1064 nm) with a maximum responsivity of 0.33 A/W at 785 nm. In particular, the photodiode achieves an ultra-fast rise/fall time of 6.49/6.22 μs at 0 V and a further reduction of the response time to 1.68/1.2 μs at a reverse bias of −1 V. This ultra-fast response allows the photodiode to detect switching signals with a cutoff frequency of more than 70 kHz and 200 kHz at 0 V and −1 V, respectively. This work opens up new opportunities for the development of integrated 2D photodetectors with low power consumption, high sensitivity, and high speed.

Performance study of dual heart assisted control system based on SL-SMC physiological combination controller.

The main challenges of Biventricular Assist Devices (BiVAD) as a treatment modality for patients with Bicardiac heart failure heart failure are the balance of systemic blood flow during changes in physiological activity and the prevention of ventricular suction. In this study, a model of the Biventricular Circulatory System (BCS) was constructed and a physiological combination controller based on Starling-Like controller and Sliding Mode Controller (SMC) was proposed. The effects of the physiological controller on the hemodynamics of the BCS were investigated by simulating two sets of physiological state change experiments: elevated pulmonary artery resistance and resting-exercise, with constant speed (CS) control and combined Starling-like and PI control (SL-PI) as controllers. Simulation and experimental results showed that the Starling-like and Sliding Mode Control (SL-SMC) physiological combination controller was effective in preventing the occurrence of ventricular suction, providing higher cardiac output, maintain balance of systemic blood flow, and have higher response speed and robustness in the face of physiological state changes.

Indoor Thermal Environment Improvement Based on Switchable Radiation/Convection-Combined Intermittent Heating: Comparison between Conventional Terminals and Integrated Novel Terminal

Intermittent heating is an energy-saving heating mode, which can save energy in terms of time, and thus is worth promoting, particularly in residential heating scenarios. Conventional radiant heating terminals, that is floor heating, and convective heating terminals, that is fan coils, cannot achieve both intermittent and thermal comfort during intermittent heating. Therefore, this study proposes a switchable convective-radiant heating regulation method for floor heating and fan coils to achieve a comfortable indoor environment with high thermal response speed. Furthermore, a novel combined radiant-convective heating terminal was proposed for a reliable and effective solution. Results showed that the proposed switchable method could increase both intermittence and thermal comfort. In addition, the heating terminal showed better heating performance than the combination of two conventional terminals at the key points of heating capacity, flexibility, and thermal response. It could initially heat up a typical residential space within 20–40 min and then stabilize the room temperature in a comfortable range of 18–22 °C, showing great potential for intermittent heating in room-scale heating conditions. This study provides a reference technique for intermittent heating with reduced system complexity and precise environmental control.

A Smith Predictor Modified with a Pseudo Feedforward Control for the Charge-Coupled Device-Based Optoelectronic Tracking System.

In the high-precision optoelectronic tracking system (OTS) based on a charge-coupled device (CCD), the boresight error extracted from the tracking image contains an undeniable delay, which directly limits the control bandwidth of visual tracking. High bandwidth means high response speed and tracking accuracy. Generally, a model-based delay compensation control method called the Smith predictor is utilized to separate time delay from the closed loop to promote the control bandwidth. However, due to the existence of errors between the established model and the real object, the improvement in the bandwidth is still limited to ensure system stability, resulting in insufficient tracking performance. In this paper, to solve the problem, a Smith predictor modified with pseudo feedforward control for the OTS is proposed. The experimental results demonstrate that the proposed method achieves significant improvements in tracking performance, reducing the maximum residual error at 1 Hz from 365 arcseconds (using the classic Smith predictor) to 283 arcseconds, a 22.5% improvement. Across the main frequency band (0.2 Hz to 2 Hz), the residual errors were consistently lower using the proposed method.

Controlling photothermoelectric directional photocurrents in graphene with over 400 GHz bandwidth

Photodetection in the near- and mid-infrared spectrum requires a suitable absorbing material able to meet the respective targets while ideally being cost-effective. Graphene, with its extraordinary optoelectronic properties, could provide a material basis simultaneously serving both regimes. The zero-band gap offers almost wavelength independent absorption which lead to photodetectors operating in the infrared spectrum. However, to keep noise low, a detection mechanism with fast and zero bias operation would be needed. Here, we show a self-powered graphene photodetector with a > 400 GHz frequency response. The device combines a metamaterial perfect absorber architecture with graphene, where asymmetric resonators induce photothermoelectric directional photocurrents within the graphene channel. A quasi-instantaneous response linked to the photothermoelectric effect is found. Typical drift/diffusion times optimization are not needed for a high-speed response. Our results demonstrate that these photothermoelectric directional photocurrents have the potential to outperform the bandwidth of many other graphene photodetectors and most conventional technologies.

Design of a High-Frame-Rate and Large-Grayscale Simulation Projection System Based on Digital Micromirror Devices

With the increasing acquisition speed of image sensors, it has become necessary to provide image sources with higher frame rates and grayscale in order to meet testing requirements. In the field of semi-physical simulation projection, digital micromirror devices are often chosen for their high resolution, uniformity, response speed, and energy concentration. In this study, we utilized digital micromirror devices to construct a high-frame-rate and large-grayscale simulation projection system. To achieve our experiment goals, we employed two digital micromirror devices. One DMD was used to modulate the light intensity of the light source, while the other generated images with different bit planes. By projecting the target images onto the image sensor, we were able to achieve a frame rate of 1611 hz for the projected 12-bit image. This system meets the requirements for our experiment design and ensures the accurate testing of image sensors.