High Response Research Articles

Controlled growth of asymmetric chiral TeOx for broad-spectrum, high-responsivity and polarization-sensitive photodetection.

Low-dimensional nanostructures, especially one-dimensional materials, exhibit remarkable anisotropic characteristics due to their low symmetry, making them promising candidates for polarization-sensitive photodetection. Here, we present a chemical vapor deposition synthesis method for tellurium suboxide (TeOx), confirming the practicality of photodetectors constructed from TeOx nanowires (NWs) in high-responsivity, broadband, and polarization-sensitive detection. By precisely controlling the thermodynamics and kinetics of TeOx NWs growth, we achieve large-scale growth of TeOx NWs with highly controllable dimensions and propose a method to induce intrinsic built-in strain in TeOx NWs. Photodetectors based on quasi-one-dimensional TeOx NWs with ohmic contact demonstrate broadband spectral response (638-1550nm), high responsivity (13 700 mA·W-1), and superior air stability. Particularly, owing to the inherent structural anisotropy of the photodetectors, they exhibit polarization-sensitive photodetection, with anisotropy ratios of 1.70 and 1.71 at 638 and 808nm, respectively.

Exploring the association of ADAM17 expression with survival in patients with non-small cell lung cancer.

The A disintegrin and metalloprotease (ADAM) family is involved in many vital cellular events, from proliferation to migration, and accumulated evidence suggests its increased expression in malignant tumors. In this study, we investigated ADAM17 expression in non-small cell lung cancer (NSCLC) and its relationship with clinicopathological factors and survival. Immunohistochemical staining of ADAM expression was performed in 108 patients with NSCLC and in 54 control cases with no known malignant diagnosis. Association between ADAM17 expression, clinicopathological factors, and survival were analyzed. The Kaplan-Meier method was used for survival analysis. ADAM17 was lowly expressed in 89 (82.4%) and highly expressed in 19 (17.6%) of the patients with NSCLC. In univariate analysis, high ADAM17 expression, lymphovascular invasion, stage, and treatment response significantly affected progression-free survival (PFS) and overall survival (OS) (p < 0.05). Multivariate analysis also showed that high ADAM17 expression, lymphovascular invasion, stage, and treatment response were important prognostic factors for PFS and OS (p < 0.05). Our study revealed that high ADAM17 expression significantly associated with OS and PFS in patients with NSCLC. ADAM17 may potentially be the area of a new targeted treatment strategy in NSCLC. Thus, routine evaluation of ADAM17 expression in patients with NSCLC may be a future consideration.

Electrochemical Sensors for Antibiotic Detection: A Focused Review with a Brief Overview of Commercial Technologies.

Antimicrobial resistance (AMR) poses a significant threat to global health, powered by pathogens that become increasingly proficient at withstanding antibiotic treatments. This review introduces the factors contributing to antimicrobial resistance (AMR), highlighting the presence of antibiotics in different environmental and biological matrices as a significant contributor to the resistance. It emphasizes the urgent need for robust and effective detection methods to identify these substances and mitigate their impact on AMR. Traditional techniques, such as liquid chromatography-mass spectrometry (LC-MS) and immunoassays, are discussed alongside their limitations. The review underscores the emerging role of biosensors as promising alternatives for antibiotic detection, with a particular focus on electrochemical biosensors. Therefore, the manuscript extensively explores the principles and various types of electrochemical biosensors, elucidating their advantages, including high sensitivity, rapid response, and potential for point-of-care applications. Moreover, the manuscript investigates recent advances in materials used to fabricate electrochemical platforms for antibiotic detection, such as aptamers and molecularly imprinted polymers, highlighting their role in enhancing sensor performance and selectivity. This review culminates with an evaluation and summary of commercially available and spin-off sensors for antibiotic detection, emphasizing their versatility and portability. By explaining the landscape, role, and future outlook of electrochemical biosensors in antibiotic detection, this review provides insights into the ongoing efforts to combat the escalating threat of AMR effectively.

Response Satisficing Across Online Data Sources: Effects of Satisficing on Data Quality and Policy-Relevant Results

The use of crowdsourced data has become extremely popular in marketing and public policy research. However, there are concerns about the validity of studies that source data from crowdsourcing platforms such as Amazon Mechanical Turk (MTurk). Using five different online sample sources, including multiple MTurk samples and professionally managed panels, the authors address issues related to online data quality and its effects on results for a policy-based 2 × 2 between-subjects experiment. They show that survey response satisficing, as well as multitasking, is related to attention check performance measures beyond demographic differences, and there are substantial differences across the five different online data sources. The authors specifically identify segments of high and low response satisficers using a multi-item measure and show that there are critical differences in the policy-relevant results of the experiment for these segments of online respondents. Findings suggest implications for concerns about failures to replicate results in the policy and consumer well-being, business, and social science literatures. The authors offer some suggestions for attempting to reduce problematic effects of response satisficing and data quality that are shown to differ substantially across the sample sources examined.

High strain-rate strength response of single crystal tantalum through in-situ hole closure imaging experiments

The properties of crystalline materials often depend on directionality and operating conditions. Specifically, the strength of materials can depend anisotropically on crystal direction and the loading condition. To probe these effects, a preliminary series of high strain-rate (>105/s) strength plate-impact hole closure experiments were performed on high purity single crystal tantalum cubes. The orientation of the single crystals with respect to impact/loading were varied to provide data to inform crystal plasticity modeling efforts. The experiments consist of in-situ high-resolution X-ray radiographic imaging of the hole collapse under dynamic compression conditions to infer the material strength via its resistance to closure at increasing levels of plastic strain. The experiments are compared against hydrocode simulation predictions. A comparison with simple elastic perfectly plastic strength model predictions is presented to elucidate the response of the different crystal orientations at high strain-rate and large plastic strains.

Construction of a sequence activated fluorescence probe for simultaneous detection of γ-glutamyl transpeptidase and peroxynitrite in acute kidney injury

Acute kidney injury (AKI) can result in a sudden decline in kidney function and, if not promptly diagnosed and treated, can lead to a high mortality rate. Therefore, there is a critical need for the development of a non-invasive and dependable early diagnostic method for AKI to prevent its progression and deterioration. To address the risk of misdiagnosis or overlooked diagnosis due to reliance on a single biomarker, we developed a novel molecular fluorescent probe (HX-GP) to simultaneously detect and image two biomarkers, γ-Glutamyl transpeptidase (γ-GGT) and Peroxynitrite (ONOO−), in the AKI process. HX-GP can specifically detect γ-GGT in the red fluorescence channel (λem = 613 nm) and ONOO− in the green fluorescence channel (λem = 518 nm). HX-GP demonstrated high sensitivity, selectivity, and rapid response, showing excellent biocompatibility and detection performance. In addition, HX-GP was successful in imaging experiments in a cell model of cisplatin-induced AKI, a result that highlights its potential application value in early diagnosis of AKI.

Increases in resilience and school performance among elementary school-aged afterschool participants.

Elementary-school students enrolled in a trauma-informed program participated in a prepost longitudinal study of resilience. The study assesses increases in various components of resilience, the effects of the afterschool program on resilience, and the relationship between resilience and school performance. A shortened version of a reliable resilience survey was developed from Madsen Thompson's Trauma Resilience Scale and administered at students' entry and exit from 3 yearly sessions. The high response rate provided a sample of 103 students, 37 of whom were new students with no ceiling effects. Statistical analysis demonstrated that both contextual and individual resilience increased significantly, with protective components impacting one another. Regression analyses found that the afterschool program supports significantly affected individual resilience increases, and high levels of individual resilience led to increases in school performance. The results suggest that trauma-informed contextual supports may be useful in increasing young students' well-being and closing gaps in academic performance.

Efficacy and Safety of Levilimab in Combination with Methotrexate in Patients with Active Rheumatoid Arthritis: 56-Week Results of Phase III Randomized Double-Blind Placebo-Controlled Trial SOLAR.

. To evaluate the efficacy and safety of levilimab in combination with methotrexate (MTX) in subjects with MTX resistant active RA. : The study was conducted at 21 clinical sites in Russia and Belarus. All randomized subjects have completed the study between November 2019 and October 2021. Adult subjects (154) aged ≥18years with confirmed diagnosis of RA1 were randomly assigned (2 : 1) to receive either levilimab (162 mg, SC, QW) + MTX (n = 102) or placebo + MTX (n = 52). After W24 of the study all subjects continued toreceive open label levilimab. Subjects who have achieved DAS28-CRP ≤ 2.6 at W24 were switched to maintenance (Q2W) regimen of levilimab at W28 (LVL QW/Q2W and PBO/LVL Q2W arms). Those with DAS28-CRP > 2.6 at W28 continued with QW regimen (LVL QW and PBO/LVL QW arm). The PBO/LVL Q2W arm contained only one subject, thus not included in the analysis. The efficacy analysis was performed in a population of all randomized subjects. Those with missing data due to study discontinuation or rescue therapy prescription were considered non-responders. Otherwise, the analysis was performed on complete cases. Safety was assessed through monitoring of adverse events (AEs) in a population of those, who received at least on dose of LVL (n = 152). : Better response to treatment was observed in LVL QW/Q2W as it composed of those who reach DAS28-CRP ≤ 2.6 at W24. At this time point 15/27 (55.6%) of them achieved ACR70; 23/27 (85.2%) achieved DAS28-CRP remission (<2.6) and 7/27 (25.9%) achieved ACR/EULAR2011 remission of RA. After switching to LVL Q2W, rates of ACR70 and DAS28-CRP<2.6 did not significantly changed until W52: 17/27 (63.0%) and 21/27 (77.8%), respectively, yet the proportion of subject with ACR/EULAR 2011 remission further increased and reached 12/27 (44.4%). LVL QW arm was diminished by subjects who achieved high response to treatment at W24 and composed LVL QW/Q2W arm. Thus, ACR70, and remissions rate in this arm was close to zero at W24. However, continuation of LVL QW in those who not achieved DAS28-CRP ≤ 2.6 at W24 induced ACR70 response in 37/75 (36.0%), DAS28-CRP remission in 35/75 (46.7%) and ACR/EULAR 2011 remission in 8/75 (10.7%) at W52. The most common adverse events (reported in ≥5% of subjects) were blood cholesterol increase (30.3%), ALT increase (23.0%), lymphocyte count decrease (17.1%), ANC decrease (16.4%), blood triglycerides increase (13.8%), bilirubin increase (11.2%), AST increase (9.9%), WBC decrease (9.9%), IGRA with Mycobacterium tuberculosis antigen positive (7.2%), and injection site reactions (5.9%). No deaths occurred. : Open label period confirmed the lasting efficacy and safety of levilimab in combination with MTX in subjects with MTX resistant active RA and suggested the possibility of switching to levilimab maintenance regimen (once every 2 weeks) (Q2W) in those who achieved remission of RA at week 24.

Patient-derived ovarian cancer organoid carries immune microenvironment and blood vessel keeping high response to cisplatin.

Ovarian cancer is high recurrence and mortality malignant tumor. The most common ovarian cancer was High-Grade Serous Ovarian Cancer. However, High-Grade Serous Ovarian Cancer organoid is rare, which organoid with patient immune microenvironment and blood vessels even absence. Here, we report a novel High-Grade Serous Ovarian Cancer organoid system derived from patient ovarian cancer samples. These organoids recapitulate High-Grade Serous Ovarian Cancer organoids' histological and molecular heterogeneity while preserving the critical immune microenvironment and blood vessels, as evidenced by the presence of CD34 + endothelial cells. Whole exome sequencing identifies key mutations (CSMD3, TP53, GABRA6). Organoids show promise in testing cisplatin sensitivity for patients resistant to carboplatin and paclitaxel, with notable responses in cancer proteoglycans and p53 (TP53) signaling, like ACTG/ACTB1/AKT2 genes and BBC3/MDM2/PERP. Integration of immune microenvironment and blood vessels enhances potential for novel therapies like immunotherapies and angiogenesis inhibitors. Our work may provide a new detection system and theoretical basis for ovarian cancer research and individual therapy.

Development of a Bitterness Sensor Using Partially Dissociated Amine Compounds.

This study focused on developing an advanced bitterness sensor designed to minimize interference from common anions such as nitrate (NO3-) and iodide (I-) by incorporating partially dissociated amine compounds into the sensor membrane. The conventional bitter sensor (C00) uses fully dissociated quaternary ammonium salt tetradecyl ammonium bromide (TDAB), which typically exhibits high responses to these anions, leading to inaccurate bitterness assessments. To address this issue, we explored the use of three partially dissociated amines-oleylamine (OAm), dioctadecylamine (DODA), and tridodecylamine (TDA)-as lipids in the membrane components. We fabricated sensor membranes and tested their ion selectivity, interference resistance to anion, and sensitivity to iso-alpha acids (IAAs), representative bitter compounds in beer. The results showed that the membranes with partially dissociated amines significantly reduced anion interference. Notably, the sensitivity of the TDA membrane to IAAs was 80.4 mV/dec in concentration, exceeding the 68.5 mV/dec of the TDAB membrane. This enhanced sensitivity, coupled with reduced anion interference, reveals a novel property of partially dissociated lipids in taste sensors, distinguishing them from fully dissociated lipids. These findings pave the way for the development of sensors that can accurately assess a bitter taste and have potential applications in the food and beverage industry.

Enhancing microshoot regeneration in "Turiaçu" pineapple through nodular cluster induction with putrescine

Nodular clusters are a morphogenetic pathway used in the in vitro propagation of Bromeliaceae due to their high responsiveness in the regeneration of microshoots. Additionally, endogenous polyamines, especially putrescine, may contribute to the induction of these nodular clusters. However, the potential effects of this regulator on the regeneration of microshoots when applied to explants are unclear, especially in traditional pineapple cultivars such as "Turiaçu". Therefore, our objective here was to induce and characterize the morphoanatomy of nodular clusters in combinations of 6-benzylaminopurine (BAP) and putrescine (PUT) in "Turiaçu" pineapple. Leaf segments induced in culture medium supplemented with 4 μM naphthaleneacetic acid (NAA), 8 μM BAP, and 100 μM PUT resulted in an induction rate of 56 %, with the formation of microshoots via nodular clusters, increased length, and the number of leaves per microshoot. Morphoanatomical studies revealed that in the medium with 4 μM NAA, 8 μM BAP, and 100 μM PUT, the clusters presented a voluminous size, microshoots with leaves, and the development of new leaves along the base of the explant, and the formation of meristemoids with small cells arranged in a spiral. The results indicate that auxins and cytokinins combined with exogenous putrescine are efficient for inducing nodule clusters. Thus, exogenous putrescine improves the efficiency of microshoot regeneration by nodular clusters.

Hydrothermally Grown Globosa-like TiO2 Nanostructures for Effective Photocatalytic Dye Degradation and LPG Sensing.

The rapid expansion of industrial activities has resulted in severe environmental pollution manifested by organic dyes discharged from the food, textile, and leather industries, as well as hazardous gas emissions from various industrial processes. Titanium dioxide (TiO2)-nanostructured materials have emerged as promising candidates for effective photocatalytic dye degradation and gas sensing applications owing to their unique physicochemical properties. This study investigates the development of a photocatalyst and a liquefied petroleum gas (LPG) sensor using hydrothermally synthesized globosa-like TiO2 nanostructures (GTNs). The synthesized GTNs are then evaluated to photocatalytically degrade methylene blue dye, resulting in an outstanding photocatalytic activity of 91% degradation within 160 min under UV light irradiation. Furthermore, these nanostructures are utilized to sense liquefied petroleum gas, which attains a superior sensitivity of 7.3% with high response and recovery times and good reproducibility. This facile and cost-effective hydrothermal method of fabricating TiO2 nanostructures opens a new avenue in photocatalytic dye degradation and gas sensing applications.

Demonstration of Group-Level and Individual-Level Efficacy Using Time-to-Event Designs for Clinical Trials of Antiseizure Medications.

Participants with treatment-resistant epilepsy who are randomized to add-on placebo and remain in a trial for the typical 3 to 5-month maintenance period may be at increased risk of adverse outcomes. A novel trial design has been suggested, time to prerandomization monthly seizure count (T-PSC), which would limit participants' time on ineffective therapy. We reanalyzed 11 completed trials to determine whether the primary efficacy conclusions at T-PSC matched each of the original, longer trials. A total of 11 double-blind, placebo-controlled trials of levetiracetam, brivaracetam, lacosamide, topiramate, and lamotrigine for either focal-onset or generalized-onset epilepsy were selected. We evaluated the group-level and individual-level efficacy of treatments including the median percent reduction (MPR) in seizure frequency and 50% responder rate (50RR) at T-PSC, time to second seizure, and time to first seizure compared with the full-length trial. The primary efficacy conclusions of 10 of the 11 trials would have been the same with a T-PSC design compared with the traditional design (the exception of lamotrigine had a very high initial placebo response). As a proportion of the full-length effect size, 90% of the MPR and 85% of the 50RR were seen at T-PSC (95% CI 73%-113% and 65%-110%, respectively). Using the T-PSC design, the time on blinded treatment was at least 312 participant-years shorter (40% of total duration) and 142,000 seizures occurred during this time (60% of total seizures). By contrast, the time to first or second seizure designs reproduced group-level effect size, but the primary efficacy conclusions of each trial and individual-level efficacy correspondence were fair to poor. These results support the use of this trial design for new epilepsy medication trials because this reanalysis of 11 randomized controlled trials demonstrated that observation until T-PSC was sufficient to demonstrate efficacy while potentially improving participant safety by reducing the time of exposure to placebo and inadequate treatment. Despite analysis of 11 trials including 3,619 participants, we did not observe a significant reduction in the group-level effect size, which is directly related to statistical power. The next step is to evaluate whether T-PSC is sufficient to evaluate safety as measured by adverse events.

A Smith Predictor Modified with a Pseudo Feedforward Control for the Charge-Coupled Device-Based Optoelectronic Tracking System.

In the high-precision optoelectronic tracking system (OTS) based on a charge-coupled device (CCD), the boresight error extracted from the tracking image contains an undeniable delay, which directly limits the control bandwidth of visual tracking. High bandwidth means high response speed and tracking accuracy. Generally, a model-based delay compensation control method called the Smith predictor is utilized to separate time delay from the closed loop to promote the control bandwidth. However, due to the existence of errors between the established model and the real object, the improvement in the bandwidth is still limited to ensure system stability, resulting in insufficient tracking performance. In this paper, to solve the problem, a Smith predictor modified with pseudo feedforward control for the OTS is proposed. The experimental results demonstrate that the proposed method achieves significant improvements in tracking performance, reducing the maximum residual error at 1 Hz from 365 arcseconds (using the classic Smith predictor) to 283 arcseconds, a 22.5% improvement. Across the main frequency band (0.2 Hz to 2 Hz), the residual errors were consistently lower using the proposed method.

All-in-One 2D Molecular Crystal Optoelectronic Synapse for Polarization-Sensitive Neuromorphic Visual System.

Neuromorphic visual systems (NVSs) hold the potential to not only preserve but also enhance human visual capabilities. One such augmentation lies in harnessing polarization information from light reflected or scattered off surfaces like bees, which can disclose unique characteristics imperceptible to the human eyes. While creating polarization-sensitive optoelectronic synapses presents an intriguing avenue for equipping NVS with this capability, integrating functions like polarization sensitivity, photodetection, and synaptic operations into a singular device has proven challenging. This integration typically necessitates distinct functional components for each performance metric, leading to intricate fabrication processes and constraining overall performance. Herein, a pioneering linear polarized light sensitive synaptic organic phototransistor (OPT) based on 2D molecular crystals (2DMCs) with highly integrated, all-in-one functionality, is demonstrated. By leveraging the superior crystallinity and molecular thinness of 2DMC, the synaptic OPT exhibits comprehensive superior performance, including a linear dichroic ratio up to 3.85, a high responsivity of 1.47 × 104 A W-1, and the adept emulation of biological synapse functions. A sophisticated application in noncontact fingerprint detection achieves a 99.8% recognition accuracy, further highlights its potential. The all-in-one 2DMC optoelectronic synapse for polarization-sensitive NVS marks a new era for intelligent perception systems.

Application of Supplementary Inerter-Based Damping Devices Alongside Unbonded Fiber-Reinforced Elastomeric Isolators

Earthquakes have always been a menace to the lives and properties of human beings since the beginning of modern times. Several methods have been proposed since to mitigate the various types of seismic hazards, base isolation being one of them. The base-isolated structures being very effective for general far-fault earthquakes, are, however susceptible to high responses under near-fault ground motions; thus, several inerter-based supplementary damping devices have been proposed in this study to be applied alongside a highly nonlinear and effective unbonded fiber-reinforced elastomeric isolators (UFEI) system. The dampers are optimally designed and comparatively investigated with the isolation system for mitigation of a wide range of ground motions to the benchmark structure. Furthermore, two parametric studies were also carried out, which investigated the effect of the inertance-mass ratio and floor connectivity of the grounded damper on various responses of the isolator-damper-structure system. The parametric results are further used to suggest the best configuration and inertance-mass ratios for various dampers for effective seismic mitigation of the aforementioned base-isolated structure. The results show an effective reduction in seismic responses with the use of optimal inerter-based dampers in UFEI-isolated structures.

Discerning β-emitting radioactivity from caesium-137 γ radiation via bremsstrahlung for in-situ groundwater monitoring

A qualitative approach to discern the relative contributions of 137Cs and 90Sr in-solution with a monitoring probe is described, based on a comparison of X- and γ-ray photon spectra. The bremsstrahlung yield from 90Sr has been measured as a function of distance (x) from a cerium bromide scintillation detector relative to the 137Cs γ-ray full-energy peak response. The utility of two, count-independent shape factor parameters has been compared: the ratio of the sum of the counts in the 60–800 keV region to the full-energy peak response associated with the 137Cs 662 keV γ-ray line, termed for the benefit of this paper as SF1, and the ratio of counts in the 60–350 keV region to those in the 350–450 keV region, defined in this work as SF2. These parameters probe the presence of isotopes associated with clear full-energy spectral lines and bremsstrahlung, respectively. They have been calibrated as a function of x with sealed sources in the laboratory and both are observed to be asymptotic as x→0. This approach has been tested with a variety of open, laboratory-based liquid samples comprising 90Sr and 137Cs, and in a water-based, contaminated medium in the field associated with a sump at a low-level waste disposal facility on the former fast reactor site at Dounreay, UK. The highest response in both SF1 and SF2 measured in this work is observed in these on-site measurements, consistent with x→0, implying both 90Sr and 137Cs presenting together in solution. This is consistent with prior, laboratory-based analysis of the sump media, and suggests that the β−-emitter contribution (anticipated to comprise 90Sr and 90Y) is very near the probe, consistent with the solution being in contact with it. This is of relevance where the β−/γ composition of contaminated groundwater, in-situ, is not well understood or where migratory changes in activity are suspected.

High-Performance Photodetectors Based on Suspended Ultralong Carbon Nanotubes.

Photodetectors are in huge demand in multiple fields, such as remote sensing, chemical detection, security, and medical imaging. Carbon nanotubes (CNTs) are promising candidates for high-performance photodetectors due to their extraordinary optical and electrical properties. However, the performance of previously reported CNT-based photodetectors is far from the intrinsic photoelectrical properties of CNTs because of the noncontinuous lengths, structural defects, and unsatisfactory structural design of the previously used short CNTs. The key to improving the performance of CNT-based photodetectors is to increase the length and structural quality of the CNTs. Herein, high-performance photodetectors were fabricated by using high-density suspended ultralong CNTs (SUCNTs). The suspended structures of ultralong CNTs not only reduced the electron-phonon interactions generated by substrates but also largely avoided bolometric effects through efficient heat dissipation. Moreover, the characteristics of high areal density and defect-free structures of SUCNTs could increase the effective absorption areas and improve their carrier mobility, resulting in enhanced photoconductive responses. Consequently, compared with the nonsuspended short CNTs, the SUCNT-based photodetectors achieved significantly improved photodetection performance, such as high responsivity (0.181 A W-1), detectivity (1.20 × 109 cm Hz1/2 W-1), ultrafast response (0.13 ms), and broad detection range (405-850 nm).

Enhanced self-driven flexible piezoelectric nanogenerator sensor based on NaNbO3/P(VDF-TrFE) films for security applications

The self-driven flexible piezoelectric sensor has wide application prospects in areas such as health monitoring, human-machine interaction, and warning detection due to its advantages of non-toxicity and high sensitivity. In this study, a composite film of poly(vinylidene fluoride-trifluoroethylene) [P(VDF-TrFE)] doped with NaNbO3 (NN) was prepared by electrospinning. The highly oriented NN particles promote the formation of P(VDF-TrFE) β phase, reaching a maximum β phase content of 91%. Under mechanical motion at a frequency of approximately 3 Hz, the piezoelectric nanogenerator (PENG) fabricated from the nanofiber membrane achieved a maximum piezoelectric output of 17.3 V and 12 V in the transverse and longitudinal piezoelectric responses, respectively. With an external load of 100 MΩ, the PENG obtained a maximum power density of 0.67 μW/cm². Additionally, the PENG sensor exhibited sensitivity to various human activities and demonstrated high sensitivity and rapid response in monitoring the status of the proposed door lock opening/closing, highlighting its enormous potential in security monitoring applications.

Orthogonal Photo‐ and Thermo‐Responsive Fluorescent Polymeric Hydrogels for Multi‐Level Information Encryption and Anti‐Counterfeiting

AbstractStimulus‐responsive fluorescent polymeric materials (FPMs) that can change their fluorescent states via external stimuli have been widely applied in multi‐level information encryption and anti‐counterfeiting. While many efforts have mainly focused on the design of dual‐stimuli responsive FPMs, the construction of orthogonal photo‐ and thermo‐regulation of fluorescent polymeric systems remains a challenge. Here, the orthogonal photo‐ and thermo‐responsive fluorescent polymeric hydrogels (PTFPHs) containing capsules with the phase change materials (PCMs), photoresponsive molecules (DTE), and thermally responsive molecules (TPA‐DCPP) are reported. They are capable of reconfiguring fluorescence (none, green, yellow, red) via photo‐ and thermo‐induced fluorescence resonance energy transfer (FRET) process. Additionally, not only can the thermochromic property of PTFPHs be regulated by modulating the composition of PCMs, but the thermochromic and photochromic properties of PTFPHs can also be tuned by using SDS to control the size of capsules. The developed hydrogels exhibited high fluorescence contrast, fast response, and excellent reversibility. The PTFPHs are successfully applied in multi‐level information encryption and integrated application between temperature monitoring and anti‐counterfeiting. The works represented a strategy for developing multi‐stimuli responsive PTFPHs in multi‐level information encryption and advanced anti‐counterfeiting.