High-resolution Seismic Reflection Profiles Research Articles

Late Pleistocene-Holocene sea level and climate changes in the Gulf of Saros: Evidence from seismostratigraphic record and sediment core data

A detailed record of sea level changes and climate oscillations in the Gulf of Saros during the late Pleistocene to the Holocene is provided by high-resolution seismic reflection profiles and analysis of a sediment core. The seismic stratigraphy reveals the formation of four main depositional units bounded by prominent reflection surfaces, reflecting high sea level variations. The Last Glacial Maximum period in the gulf is associated with the lowstand sea level, forming the deepest marine terrace at −148 m. The increasing sea level due to post-glacial warming was accompanied by the deposition of transgressive units characterized by coastal onlaps together with local channel-fills. This transgressive phase was modulated by three brief still-stands sea levels at 17 cal ka BP, 14.6 cal ka BP and 13.6 cal ka BP, producing the younger marine terraces in the gulf at −135 m, −112 m and −90 m, respectively. A comparison of their depths with the global sea level curve reveals elevation differences with decreasing subsidence rates from the older to younger ages, implying tectonic subsidence along the gulf floor.The close correlation of multi-proxy data from core SAG-22 in the gulf with the northern Aegean and Anatolia data strongly indicates that the timings of the past climate events generally agree with the global and regional climate patterns. The warm climate around the gulf during the late phase of Bølling/Allerød (13.3–12.6 cal ka BP) is represented by high marine biological productivity and improved ventilation in the deeper water due to subsequent transgression. Permafrost formation in the catchment area during the following cold and dry Younger Dryas period (12.6–11.7 cal ka BP) resulted in reduced soil erosion and sediment input to the gulf. Noticeable warming during the Early Holocene between 11.2 cal ka BP and 9.4 cal ka BP is recorded by the multi-proxy data of the core when the enhanced marine biological productivity occurred above the poorly oxygenated deep water column. The climatic deterioration to a cooler and drier phase during the Early to Middle Holocene transition (9.4–7.8 cal ka BP) resulted in intense physical weathering and erosion, causing the highest sedimentation in the gulf. The later period of the Holocene is associated with the formation of two discrete sapropels at 7.8 cal ka BP and 5.4 cal ka BP that were accompanied by warm and wet climates around the gulf.

Seismogenic fault of the 2021 Ms 6.0 Luxian induced earthquake in the Sichuan Basin, China constrained by high-resolution seismic reflection and dense seismic array

Accurate documentation of the location and geometry of seismogenic faults are critical for understanding strong seismicity and seismic hazard mitigation. A rising concern worldwide is induced seismicity caused by hydraulic fracturing, yet the geological characteristics and mechanisms of such seismogenic faults remain insufficiently understood. In particular, a first-order issue is whether the strong (M ≥ 5.0) induced earthquakes are caused directly by the slip of shallow faults near shale reservoirs or indirectly by deep basement faults. The September 16, 2021 Ms 6.0 (Mw 5.4) Luxian earthquake in the Sichuan Basin, China is one of the world's greatest induced earthquakes related to shale gas exploitation. Here we constrain the geometry of the seismogenic fault of this earthquake using three-dimensional seismic reflection data and a dense seismic array. Pre-existing faults in the sedimentary cover are clearly visible in seismic coherence slices. However, these shallow faults do not match the seismological parameters of the Luxian earthquake. High-resolution seismic reflection profiles combined with relocated earthquakes indicate that the seismogenic fault is located in the Precambrian basement. The results suggest that the mainshock is most likely caused by the poroelastic effects due to fluid injection. Hydraulic fracturing could have reactivated a large-scale basement fault and triggered the strong earthquakes under a relatively high geo-stress conditions in the study area. The basement fault slipped upward and ruptured the sedimentary cover, resulting in a significant difference between the focal and centroid depths of the mainshock. Our findings emphasize the importance of investigating regional tectonic and geological settings, local stress fields, and pre-existing faults for studying potential induced seismicity in shale gas fields.

Sedimentation since 140 ka in Te Tai-o-Aorere Tasman Bay, Aotearoa New Zealand

ABSTRACT Late Pleistocene and Holocene sedimentation records changes in glacio-eustatic cycles, oceanography, active tectonics, and sediment supply. Here, we use high-resolution seismic-reflection profiles in Te Tai-o-Aorere Tasman Bay to investigate sedimentary deposit distributions associated with sea-level cyclicity over ∼140 ka. We identify nine seismic stratigraphic units below the inner continental shelf, interpret their character based on stratal relationships and acoustic properties, and infer ages using global sea level. The sequence includes stacked deposits and unconformities associated with the shifting shoreline over glacial cycles. Prominent erosional features include a lowstand ravinement surface and two transgressive surfaces formed during sea-level rise following the last two glacial maxima of ∼20 ka and ∼140 ka. The youngest surface marks the base of post-glacial sediment accumulated since ∼12 ka in the study area. Post-glacial sediment includes five seismically mappable units, covering an area of ∼1400 km2 and deposit volume of ∼9 km3. Time-averaged sediment accumulation rates are estimated to range from a maximum of ∼1.6–2.8 m/kyr to ∼0.5–0.9 m/kyr. Sequence stratigraphy interpreted in Te Tai-o-Aorere Tasman Bay is representative of accumulation in a relatively wide-shelf, sheltered inner bay setting supplied by mountainous catchments, and provides stratigraphic context necessary for future stratigraphic and tectonics studies.

Active tectonics in the Calabrian Arc: Insights from the Late Miocene to Recent structural evolution of the Squillace Basin (offshore eastern Calabria)

The Calabrian Arc represents one of the most active sectors of the upper plate of the Tyrrhenian-Ionian subduction system. This research aims to reconstruct the evolution of the Squillace Basin (Ionian offshore of the Calabrian Arc) from the Late Miocene to Recent times and recognise active shallow and deep structures using a multiscale approach. The latter is based on interpreting high-penetration and high-resolution seismic reflection profiles, calibrated with well-log data coupled with bathymetric data and the distribution of instrumental earthquakes. Data highlight three steps in the evolution of the Squillace Basin. A Late Miocene extensional event led to the formation of WNW-ESE oriented horst and half-graben structures. During the Pliocene, deformation was localised in the central and northern sectors of the basin and expressed by a WNW-ESE oriented strike-slip fault and NW-SE normal to trastensional faults, respectively. A transpressional event started in the Early Pleistocene, causing the positive inversion of deep (> 3 km) extensional faults and the formation of NW-SE to WNW-ESE oriented transpressional/reverse faults and related anticlines. The kinematics of these faults agree with the NW-SE oriented left-lateral Albi-Cosenza, Lamezia-Catanzaro and Petilia-Sosti crustal fault zones developed in north Calabria. The results of this work suggest that the transpressional structures in the northwestern sector of the basin likely represent the offshore prolongation of the Albi-Cosenza fault zone. NW-SE to WNW-ESE trending, shallow (<2 km) high-angle normal faults offset the younger deposits. Their depth and direction indicate that these faults are secondary structures formed in the extrados of the anticlines associated with the transpressional faults. The distribution of earthquakes shows events with M > 3 and depth <15 km located in the hanging wall of transpressional faults. The integrated data suggest that these structures are active and probably responsible for the major earthquakes that affected the Ionian offshore.

Detailed Imaging of a Seismogenic Fault That Potentially Induced the Two 2019 Weiyuan Moderate Earthquakes in the Sichuan Basin, China

Abstract Induced earthquakes are becoming a significant issue. Several destructive induced earthquakes (Ms ≥5.0) have occurred in shale gas fields located at the southwestern Sichuan basin, China, in the recent years. Specifically, two moderate earthquakes with magnitudes of Ms 5.4 (occurred on 8 September 2019) and 5.2 (occurred on 18 December 2019) exceeded the largest earthquake ever recorded in the Weiyuan. It remains unclear which seismogenic faults were responsible for the two moderate events due to insufficient knowledge of the subsurface structure and contradictory hypocenter depths obtained from different seismological methods. In this study, mainshock locations, focal mechanisms, and precise relocations of microseismicity were used to map the 3D geometry of the seismogenic fault. The result shows that the two moderate earthquakes occurred on the same fault. High-resolution seismic reflection profiles indicate several preexisting faults at various depths and a potential seismogenic fault. No large-scale faults are identified in the sedimentary cover above the Cambrian at the shallow centroid depth of these earthquakes. However, the seismic reflectors show phase discontinuous feature, indicating the existence of preexisting faults in the basement. A preexisting fault in the basement is consistent with a seismogenic fault that may have induced the two moderate earthquakes. Our study suggests that poroelastic stress propagation is likely responsible for the basement fault reactivation. The rupture on a stressed basement fault was triggered and produced two moderate earthquakes in a short period during hydraulic fracturing. The previous strategy of avoiding direct injection of fluids into preexisting faults to reduce seismic risk in operation region is not enough to avoid the possibility of the coupled poroelastic stress triggering deep fault rupture. We need to reevaluate the potential seismic risk of shale gas development in Weiyuan, the southern Sichuan basin shale gas field considering the preexisting faults in sedimentary and in basement and the effect of the fully coupled poroelastic stress field.

Effect of Dam Emplacement and Water Level Changes on Sublacustrine Geomorphology and Recent Sedimentation in Jackson Lake, Grand Teton National Park (Wyoming, United States)

Dam installation on a deep hydrologically open lake provides the experimental framework necessary to study the influence of outlet engineering and changing base levels on limnogeological processes. Here, high-resolution seismic reflection profiles, sediment cores, and historical water level elevation datasets were employed to assess the recent depositional history of Jackson Lake, a dammed glacial lake located adjacent to the Teton fault in western Wyoming (USA). Prograding clinoforms imaged in the shallow stratigraphy indicate a recent lake-wide episode of delta abandonment. Submerged ∼11–12 m below the lake surface, these Gilbert-type paleo-deltas represent extensive submerged coarse-grained deposits along the axial and lateral margins of Jackson Lake that resulted from shoreline transgression following dam construction in the early 20th century. Other paleo-lake margin environments, including delta plain, shoreline, and glacial (drumlins, moraines) landforms were likewise inundated following dam installation, and now form prominent features on the lake floor. In deepwater, a detailed chronology was established using137Cs,210Pb, and reservoir-corrected14C for a sediment core that spans ∼1654–2019 Common Era (CE). Dam emplacement (1908–1916 CE) correlates with a nearly five-fold acceleration in accumulation rates and a depositional shift towards carbonaceous sediments. Interbedded organic-rich black diatomaceous oozes and tan silts track changes in reservoir water level elevation, which oscillated in response to regional climate and downstream water needs between 1908 and 2019 CE. Chemostratigraphic patterns of carbon, phosphorus, and sulfur are consistent with a change in nutrient status and productivity, controlled initially by transgression-driven flooding of supralittoral soils and vegetation, and subsequently with water level changes. A thin gravity flow deposit punctuates the deepwater strata and provides a benchmark for turbidite characterization driven by hydroclimate change. Because the Teton fault is a major seismic hazard, end-member characterization of turbidites is a critical first step for accurate discrimination of mass transport deposits controlled by earthquakes in more ancient Jackson Lake strata. Results from this study illustrate the influence of dam installation on sublacustrine geomorphology and sedimentation, which has implications for lake management and ecosystem services. Further, this study demonstrates that Jackson Lake contains an expanded, untapped sedimentary archive recording environmental changes in the American West.

Quaternary Lowstand Prograding Wedges of the Salento Continental Shelf (Southern Adriatic Sea, Italy): Architectural Stacking Patterns and the Control of Glacio-Eustatic Sea Level Fluctuations and Foreland Tectonic Uplift

The performance of both the tectonic uplift and of the 4th-order glacial eustatic sea level fluctuations in controlling the stratigraphic architecture of Quaternary lowstand prograding wedges of the Salento continental shelf (Southern Adriatic sea, Italy) during a time interval spanning from the Middle Pleistocene to the Holocene has been pointed out through the interpretation of high-resolution seismic reflection profiles and their correlation to the curves of the isotopic stratigraphy. Three main transgressive surfaces of erosion (RS1, RS2 and RS3) punctuate the stratigraphic architecture of the Salento continental shelf, separating Quaternary lowstand prograding wedges between them. All along the Middle Pleistocene, increasing the tectonic uplift of the Puglia offshore, combining with 4th-order glacio-eustatic variations, have dealt with the pattern of a broad forced regression prograding wedge, favoring a platform progradation of approximately 15 km. The architectural stacking patterns of the overlying Late Pleistocene and Holocene prograding wedges are controlled by 4th-order glacio-eustatic sea level changes, allowing for the formation of incomplete depositional sequences. In this period, the eustatic signature overcomes the tectonic mark, implying a decline in the uplift of the Apulian foreland in the course of the final 250 ky.

Evolution of a single incised valley related to inherited geology, sea level rise and climate changes during the Holocene (Tirso river, Sardinia, western Mediterranean Sea)

We performed a morpho-stratigraphic study of the Tirso River incised valley (Sardinia Island, western Mediterranean Sea), an erosional feature crossing the Sinis fault, a major normal fault bordering the Campidano basin between the Gulf of Oristano and the western Sardinia shelf. High-resolution seismic reflection profiles and multibeam echosounder data, integrated by age-constrained stratigraphic logs derived from 9 sediment cores enabled us to reconstruct the valley evolution during the Holocene. We found that the Tirso valley is the result of a single event of incision and infill during the last eustatic cycle, strongly controlled by the presence of the Sinis fault. In fact, this structure represents a geological threshold that marks an abrupt change in substrate lithology and seabed slope, which controlled the valley morphology, narrow when downcutting early Pliocene formations along the steeper open shelf, and wider inside the Gulf, in the Pleistocene alluvial deposits of the flatter Gulf of Oristano. The sedimentary record starts with alluvial sediments filling the valley along the shelf during the initial phase of sea level rise, i.e., over 10 ka. During the last ~9.0 ka, a bay head delta developed, with the formation of barriers at the gulf entrance. In the mid-late Holocene, the progressive sea-level rise led to rapid drowning of the barrier system, recorded by marine and estuarine sediments filling the valley. Analysis of ecological associations in the cores, collected along a valley-normal transect, allowed for a detailed reconstruction of the paleo-environmental conditions during the latest phase of the incised valley filling controlled by global climatic variations in the Mediterranean region between ~9.0 and ~ 4.5 ka. Together with eustasy, our work reveals that the evolution and sedimentary infill of the Tirso incised valley was strongly controlled by inherited geological constraints, which influenced the morphology of the valley and the stratigraphic pattern.

Comprehensive Geophysical Measurement in Seismic Safety Evaluation: A Case Study of East Lake High-Tech Development Zone, China

Wuhan East Lake High-tech Development Zone is a National Innovation Demonstration Zone where several major projects are under construction. For the seismic safety evaluation of the zone, it is urgent to find out basic data such as stratigraphic structure, geometric characteristics of buried faults, and overburden thickness. In this study, seismic reflection and microtremor surveys are adopted in seismic safety evaluation in urban areas for the first time. Combined with borehole data, the overburden thickness and buried faults in the target area are detected and analyzed. The results are as follows: ① The seismic reflection detection is carried out for the possible hidden locations of the Xiangfan-Guangji Fault and Macheng-Tuanfeng Fault in the target area, and the obtained high-resolution seismic reflection profiles can be used to precisely divide the stratigraphic structure and preliminarily find out the geometric characteristics such as the strike, tendency, and the buried depth of the upper breakpoint of the buried faults. ② A microtremor survey is carried out in key regions of the target area, and the obtained velocity structure imaging can provide a perspective window into the urban underground space structure and accurately determine overburden thickness and the depth of strongly and moderately weathered bedrock. Comprehensive geophysical measurements can better realize the acquisition of basic data such as the stratigraphic structure of complex regions and characteristics of urban buried faults, which provides an important basis for seismic fortification. At the same time, the combined application of geophysical methods avoids the detection of the blind area and provides a guarantee for urban safety and sustainable development. Furthermore, the study has reference value for seismic safety evaluation in similar areas of the world. If comprehensive geophysical measurement can be popularized, its economic and scientific value will be immeasurable.

Revisit the Sedimentary Stratigraphic Evolution and Environmental Changes on the Outer Shelf of the East China Sea Since MIS 5

The East China Sea (ECS) is featured by the broad continental shelf, huge terrigenous sediment input and striking river-sea interaction during the Quaternary. Despite the numerous studies, mostly on the delta, coastal and inner shelf areas, the late Quaternary stratigraphy and sedimentary environment on the mid-outer ECS shelf were poorly documented. In particular, it is still controversial in issues such as the recognition of marine transgression deposits in the interglacial period and the occurrence and ages of deposits in the glacial period. This study presents new data of high-resolution seismic reflection profiles and collective evidences from lithology, microfossil assemblages and geochronology of borehole SFK-1 on the ECS outer shelf, aiming to revisit the sedimentary stratigraphic evolution and environmental changes since the Marine Isotopic Stage 5 (MIS 5). Sixty-one ages were obtained by radiocarbon and Optical Stimulation Luminescence (OSL), providing robust constraints on the chronostratigraphy. Three marine regression/transgression cycles were identified, which primarily constrained the sedimentary environmental evolution over the past 100 kyrs. Although the strong river-sea interaction accompanied with sea level fluctuations characterized the late Quaternary depositional environment on the shelf, this study clearly identified the stratigraphic boundaries between MIS 1 and MIS 5, and confirmed the tide-influenced fluvial deposition formed during the Last Glacial Maximum on the outer shelf. We infer that tidal forcing significantly superimposed its influence on sea level change and thus formed the most striking feature on the late Quaternary stratigraphy of the open ECS shelf. With the combination of a large number of absolute depositional ages with high-resolution core records, the major findings of this study may allow better understanding of the Quaternary sedimentary evolution and river-sea interaction on open shelves dominated by siliciclastic sedimentation.

Depositional history of Lake Chala (Mt. Kilimanjaro, equatorial East Africa) from high-resolution seismic stratigraphy

Sediments deposited in Lake Chala (Kenya/Tanzania) constitute a high-resolution archive of past climate and environmental change in equatorial East Africa spanning two glacial-interglacial cycles. To correctly interpret the proxy records it contains, it is crucial to understand the evolution of lacustrine sedimentation in this volcanic crater basin. Building on previous seismic stratigraphic analysis by Moernaut et al. (2010) of a dense grid of 37 km high-resolution seismic reflection profiles with up to 270 ms two-way travel time (ca. 210 m depth) of sub-bottom penetration, this study presents a seismic-based reconstruction of the complete depositional history of Lake Chala as well as a first-order age model for the major documented stages in lake evolution. The seismic stratigraphic sequence comprises 16 distinct and finely-stratified units (U1-U16, youngest to oldest), grouped into five major depositional stages. Stage I (U16, ca. 249-212 ka) marks the initiation of sedimentation in an originally ring-shaped depositional area surrounding two central tuff cones emerging from the basin floor. Stage II (U15-U12, ca. 212-114 ka) represents the onset of basinwide sedimentation above the tuff cones, implying a gradual rise in lake depth and shift to more strictly hemipelagic sedimentation. Stage III (U11-U8, ca. 114-97 ka) represents the development of a relatively flat lake floor during a period of significantly reduced lake depth. Stage IV (U7-U4, ca. 97–20.5 ka) is again characterized by largely undisturbed hemipelagic sedimentation under mostly high lake-depth conditions. Stage V (U3-U1, 20.5 ka BP to Present) represents the establishment of the present-day, very broad and flat basin floor under fluctuating lake level. Reassessing the Moernaut et al. (2010) suggestion of a minor disconformity at ca. 100 m sub-bottom depth, we here interpret this seismic feature as a thick turbidite related to a mass wasting event. Consequently we can affirm continuity of lacustrine sedimentation in the depocenter of Lake Chala throughout the past ca. 250,000 years.

Complex stratigraphic relationships between volcanic features and sedimentary deposits in a submarine environment: The northern offshore Holocene Ischia volcanic field (Italy)

The correlation between onshore and offshore of the volcanic features in a complex volcanic field area is a difficult task, however, it is a fundamental step in order to better understand the geological evolution of such a complex area and for an assessment of geologic hazards.Ischia is a well exposed and densely populated volcanic field located in the Campania volcanic province of Italy. In order to improve our understanding of the recent volcanic history of Ischia Island, high-resolution seismic reflection profiles were used to identify volcanic and sedimentary features in the northern offshore.The volcano stratigraphy interpretation permitted us to recognize seismic units with a reflection-free/chaotic facies. These latter units have been associated with volcanic deposits and correlated to the main volcanic units outcropping on the northern coast of Ischia Island. They are limited in extent and interlayered with eight seismic units with continuous reflectors corresponding to clastic sedimentary units that were deposited during inter-eruptive phases. The main result of this work is the documentation of volcanic activity during the Holocene in the area offshore between Castello d'Ischia, Ischia Porto (mainly effusive products) and Punta della Scrofa (mainly shallow lava domes and dykes). The key volcanic units were mapped and 3D geological models were reconstructed. The reconstruction of the stratigraphic framework offshore a volcanic coast provides a pathway to the investigation of the stratigraphic relationships between inter-eruptive sedimentary deposits and volcanic units, and permits the assessment of a wide and continuous chronostratigraphic framework in a complex area. Furthermore, the onshore-offshore correlation of the main Holocene volcanic units allows us to better estimate their areal distribution, a critical factor in the hazard evaluation of a coastal volcanic area. The application of seismic volcano stratigraphy illustrates the remarkable possibilities that the study of submarine volcanic fields offers.

Holocene seismic stratigraphy of the southern arms of Lago Argentino

Lago Argentino hosts various calving glaciers, including the famous Perito Moreno. Although the onland Holocene glacier dynamics is rather well constrained, the paleoenvironments developed in association with a retreating ice front remain largely unknown. A detailed analysis of high-resolution seismic reflection profiles acquired in the southern arms of Lago Argentino has allowed the identification of several unconformities within the lacustrine sedimentary infill. Four seismostratigraphic sequences have been identified in Brazo Rico and three in Brazo Sur. These sequences are separated by three erosive unconformities in Brazo Rico and two in Brazo Sur, and reflect the sedimentation of a pre-Holocene deep basin in a proglacial lake. The older unconformities are associated with instability events within the basin which triggered several mass movements, possibly related to enhanced seismic activity. The younger erosive unconformities were correlated with the “Pearson 1a/Frias 1 advance”, the major glacier advance in the Holocene of the Lago Argentino Basin. This research highlights the importance of studying the glaciolacustrine sediments, representing decisive records of the glacial history and palaeoclimate, which could help unveiling the factors controlling glacier dynamics in the basin and reconstructing the deglacial landscape of the area.

Seismogenic Faults of the Changning Earthquake Sequence Constrained by High-Resolution Seismic Profiles in the Southwestern Sichuan Basin, China

Abstract The seismicity rate in the southwestern Sichuan basin, China, dramatically increased after 2014. The associated moderate earthquakes may have been induced by salt mining or shale gas exploration. The location of the seismogenic faults causing these moderate earthquakes has not been confirmed, resulting in a lack of understanding of the earthquake mechanisms in the study area. The detailed structural characteristics of pre-existing faults, which are typically responsible for induced seismicity, are unclear. In this study, we used high-resolution seismic reflection profiles in conjunction with geological, seismologic, and geodetic data to reveal the 3D distributions of the seismogenic faults. Basement thrust faults in the Changning anticline were identified using seismic interpretations and are associated with the 2019 Changning earthquake sequence. The geometry and location of these pre-existing faults are consistent with previous studies of the seismology and structural geology in the area. The well-developed pre-existing fault system in the sedimentary cover and basement makes the Changning area vulnerable to induced earthquakes. Present-day reactivation of the basement fault system reveals the unstable state of the local tectonic stress field. It is possible that the potential seismic risk in this region could be increased by industrial activity in the southwestern Sichuan basin.

Seismic imaging across fault systems in the Abitibi greenstone belt – an analysis of pre- and post-stack migration approaches in the Chibougamau area, Quebec, Canada

Abstract. Two high-resolution seismic reflection profiles acquired north and south of Chibougamau, located in the northeast of the Abitibi subprovince of Canada, help understand historic volcanically hosted massive sulfide (VMS) deposits and hydrothermal Cu–Au mineralization found there. Major faults crossed by the profiles include the Barlow fault in the north and the Doda fault and the Guercheville fault in the south, all targets of this study that seeks to determine spatial relationships with a known metal endowment in the area. Common-offset DMO corrections and common-offset pre-stack time migrations (PSTMs) were considered. Irregularities of the trace midpoint distribution resulting from the crooked geometry of both profiles and their relative contribution to the DMO and PSTM methods and seismic illumination were assessed in the context of the complex subsurface architecture of the area. To scrutinize this contribution, seismic images were generated for offset ranges of 0–9 km using increments of 3 km. Migration of out-of-plane reflections used cross-dip element analysis to accurately estimate the fault dip. The seismic imaging shows the thickening of the upper-crustal rocks near the fault zones along both profiles. In the northern seismic reflection section, the key geological structures identified include the Barlow fault and two diffraction sets imaged within the fault zone that represent potential targets for future exploration. The south seismic reflection section shows rather a complicated geometry of two fault systems. The Guercheville fault observed as a subhorizontal reflector connects to a steeply dipping reflector. The Doda fault dips subvertical in the shallow crust but as a steeply dipping reflection set at depth. Nearby gold showings suggest that these faults may help channel and concentrate mineralizing fluids.

Decoding a complex record of anthropogenic and natural impacts in the Lake of Cavazzo sediments, NE Italy

The Lake of Cavazzo is a natural, lacustrine basin in the Friuli-Venezia Giulia region (NE Italy), which occupies a fluvio-glacial suspended valley of the Tagliamento river, at the southern front of the Alpine chain. The lake formed after the melting of major glacial tongues at the end of the Last Glacial Maximum, and has been affected in recent years by natural and anthropogenic events, with economic, cultural and environmental consequences. According to local witnesses, the lake environment has changed dramatically after the 1950s, when the basin was connected to a hydroelectric power plant collecting waters from a wider catchment area, as it served as its final discharge basin.In this work, based on a densely-spaced grid of high-resolution seismic reflection profiles complemented by sediment cores, we analysed the uppermost lake stratigraphy, highlighting major changes occurring at a decadal scale. Our main purpose is to verify whether and how the lake sediments record the transition from pristine/natural to artificial conditions, as well as the effects of multiple natural impacts including the 1976–77 Friuli earthquake sequence. The results of our analysis suggest varying environmental conditions of the lake after the 1950s indicated by changing sediment mineralogy, increased deposition of allochthonous clastic sediments, and recurrent episodes of anoxic conditions at the lake's floor, likely triggered by hyperpycnal flows derived from the hydroelectric power plant discharges. We also observe that the effects of the 1976–77 seismic sequence are recorded in the lake as resedimented levels, likely due to shaking, in situ deformation, landslides, and turbidity currents. Our results stress the importance of lacustrine environments as efficient recorders of anthropogenic and natural events.

Application of Automated Throw Backstripping Method to Characterize Recent Faulting Activity Migration in the Al Hoceima Bay (Northeast Morocco): Geodynamic Implications

Automation of the throw backstripping method has proven to be an effective tool for the determination of the evolution of tectonic activity in wide fault zones. This method has been applied to the Al Hoceima Bay (southwesternmost Mediterranean, Alboran Sea) for a time period covering the last 280 kyr on 672 faults imaged on 265 high-resolution seismic reflection profiles. This area was affected by major earthquakes and corresponds to a transtensional basin deformed by growth faults. The automated application of throw backstripping allowed for a faster deciphering of the migration of tectonic activity. Results show a westward migration of the deformation with quickly increasing deformation rates in the most recent time frames near Al Hoceima, one of the most populated cities. This migration is in agreement with the current seismicity, the GPS data, and recent brittle deformation data. Vertical throw rates of up to 0.47 mm/year have been calculated, for the most recent time periods, in segments of the Bokkoya fault zone. The westward migration of the deformation fits with the reconstruction suggested by the westernmost Mediterranean geodynamic models during the Pleistocene epoch, and it might be the consequence of the interaction between the northwest (NW) movement of the South Alboran indenter and the back Rif south-westward displacement. The highly accurate constraints of the evolution of the tectonic activity offered by this automation will substantially improve the seismic hazard assessment.

Large-scale margin collapses along a partly drowned, isolated carbonate platform (Lansdowne Bank, SW Pacific Ocean)

The Lansdowne Bank is a partly drowned, isolated carbonate platform of around 4000 km2 located 300 km west of New Caledonia, in the SW Pacific Ocean, in water depths of 20 to 100 m. New multibeam bathymetric data, high resolution seismic reflection profiles and sediment gravity cores have been acquired on the bank top and adjacent slopes. This dataset reveals an almost continuous 4 km wide outer reef rim located in ca. 50 m water depth, surrounding a gently deepening inner platform, reaching up to 100 m water depth. The bank is bordered by very steep slopes showing numerous erosional morphologies such as canyons, channels and gullies. Along with these bypass features, spectacular bank margin collapses and slope failures are evidenced by up to 20 km-wide bank edge and intraslope failure scars, respectively, resulting in a typical “scalloped” geometry of the bank margin. These failure scars can lead to a complete collapse of the outer reef rim and impact subsequent reef development. Bank margin collapses are evidenced by hectometer to kilometer-scale blocks and debris shed on the slope, likely emplaced by rock fall/avalanching processes originating from the brittle failure of early cemented bank edge and upper slope sediments. In turn, failures triggered on the un-cemented mud-prone middle to lower slopes likely generate more cohesive, submarine debris flows that could be at the origin of erosive morphologies within the debris fields. Estimated individual failure volumes can reach up to 3 km3. Quaternary sea-level lowstands, that would have led to platform exposure, fracturing and karstification, and the development of an erosional sea cliff, as well as subsequent rising sea-level are believed to play a significant role in mass wasting event emplacement, yet “bottom up” submarine processes such as the upslope propagation of bypass morphologies by retrogressive headward erosion cannot be ruled out. In terms of geomorphic and stratigraphic constraints, the documented bank margin collapses affect a terrace located in 70 m water depth around the bank, which, depending on its age and origin, could provide a minimum age for collapse events. Finally, considering the shallow water depth of failure headscarps, the volumes of material involved in the slides as well as their vicinity to the nearby main island of New Caledonia, numerical simulations of the tsunamigenic potential of submarine slides have been performed. They showed that these slides would have been able to produce a meter-scale wave that would reach the northern coast of the island in less than an hour.

Active fault segments along the North Anatolian Fault system in the Sea of Marmara: implication for seismic hazard

A new analysis of high-resolution multibeam and seismic reflection data, collected during several oceanographic expeditions starting from 1999, allowed us to compile an updated morphotectonic map of the North Anatolian Fault below the Sea of Marmara. We reconstructed kinematics and geometries of individual fault segments, active at the time scale of 10 ka, an interval which includes several earthquake cycles, taking as stratigraphic marker the base of the latest marine transgression. Given the high deformation rates relative to sediment supply, most active tectonic structures have a morphological expression at the seafloor, even in presence of composite fault geometries and/or overprinting due to mass-wasting or turbidite deposits. In the frame of the right-lateral strike-slip domain characterizing the North Anatolian fault system, three types of deformation are observed: almost pure strike-slip faults, oriented mainly E–W; NE/SW-aligned axes of transpressive structures; NW/SE-oriented trans-tensional depressions. Fault segmentation occurs at different scales, but main segments develop along three major right-lateral oversteps, which delimit main fault branches, from east to west: (i) the transtensive Cinarcik segment; (ii) the Central (East and West) segments; and (iii) the westernmost Tekirdag segment. A quantitative morphometric analysis of the shallow deformation patterns observed by seafloor morphology maps and high-resolution seismic reflection profiles along the entire basin allowed to determine nature and cumulative lengths of individual fault segments. These data were used as inputs for empirical relationships, to estimate maximum expected Moment Magnitudes, obtaining values in the range of 6.8–7.4 for the Central, and 6.9–7.1 for the Cinarcik and Tekirdag segments, respectively. We discuss these findings considering analyses of historical catalogues and available paleoseismological studies for the Sea of Marmara region to formulate reliable seismic hazard scenarios.

Quaternary evolution of the southeastern Korean continental shelf, East Sea: Paleo-incised valley and channel systems

About 1000 km of high-resolution seismic reflection profiles were used to study the morphology, distribution, nature, and sequence stratigraphy of incised valleys and valley fills within the Quaternary (<ca. 2.0 Ma) sedimentary section of the southeastern Korean continental shelf, East Sea. Seven sequences, S1 to S7 from bottom to top, were analyzed on the modern continental shelf. These sequences comprise a ~300 m thick sedimentary section containing, at minimum, one cycle of sea-level lowstand, transgression, and high stand deposits. The lowstand sections are composed mainly of laterally and vertically accreting fluvial channel deposits (i.e., point bars, channel lags) formed on an alluvial plain during a lowstand in sea level. The transgressive sections consist of confined, low-to moderate-amplitude continuous reflections interpreted as estuarine facies. The high stand sections, in contrast, are comprised of laterally extensive low amplitude reflections interpreted as open marine facies. Each of these sequences rests unconformably on its’ predecessor, particularly at the mid-southeastern edge of the shelf where angular, toplap, and onlapping relationships can be discerned.The sequence boundaries (SB1 to SB7) bounding these sequences are produced by fluvial incision (i.e., valleys and channels) during sea-level fall. SB4, SB5, and SB7 form the most prominent unconformities on the shelf and are incised by extensive paleo-incised valleys and channels. These valleys and distributary channels display simple U- or V-shaped cross sections or complex morphologies; they are ~1–8 km wide and ~10–60 m deep. Incised-valley fills reach a maximum thickness of over 80 m. The largest incised valley fills (~8 km wide, ~60 m thick) are found near the shelf break in the SE, indicating relative sea-level fall on this location (ca. 150 m lower than the present sea level). In the SE, the incised valleys are comprised dominantly of stacked lowstand successions (point bars and channel lags) and a lesser degree of transgressive successions (estuarine mud and levees) that are capped by subsequent high stand deposits (marine mud). The youngest channel above the valley was inferred to have been formed during the Last Glacial Maximum (LGM) on the shelf edge trajectory about 140 m lower than the present. These large incised valleys are thought to have developed through a complex history of repeated avulsion and reoccupation during the lowstand sea level. The most important factors regulating the valley morphology are the duration of sea-level fall, lithologic variations, climate (i.e., fluvial discharge), and the river gradient relative to the shelf gradient. The ancient drainage patterns are more-or-less northeast-southwest orientated, consistent with the trend of the present-day submerged fluvial channel. Superimposed upon this general pattern are the effects of tectonic activity (uplift, folds, and faults), which appear to have modified the courses of the rivers. Our results, therefore, provide a good example of how external factors (i.e., climate, tectonics, sediment supply, and paleogeomorphology) can determine the location and geometry of the valleys and the architecture of the valley-filling deposits of continental shelves.