High-resolution Optical Microscopy Research Articles

Characterization of the thickness of the Tear Film Lipid Layer in Meibomian Gland Dysfunction using high resolution optical microscopy

PurposeTo evaluate the thickness of the tear film lipid layer (TFLL) in meibomian gland dysfunction (MGD) using a high-resolution optical microscope. MethodsThe Ocular Surface Disease Index (OSDI) and meibum grade score (MGS) were used to classify 190 subjects into four groups: normal (OSDI<13 and MGS<10), mixed (OSDI≥13 and MGS<10), asymptomatic MGD (OSDI<13 and MGS≥10), and MGD (OSDI≥13 and MGS≥10). The high-resolution optical microscope was used to capture TFLL images in vivo. The histograms of TFLL thickness were analyzed and curve-fitted using probability density functions (PDFs). ResultsThere were three obvious peaks in the distributions of TFLL across the groups. From the curve-fitting process, the main outcomes are displayed according to each Gaussian function with the position of peak (μ) and the summed percentage within the range of standard deviation (σ). The normal group had distribution as follows: 33.3 ± 0.005 nm, 26%; 53.9 ± 0.019 nm, 40%; 79.4 ± 0.064 nm, 12%. The mixed group had a distribution as follows: 33.8 ± 0.004 nm, 32%; 53.1 ± 0.115 nm, 21%; 71.7 ± 0.232 nm, 27%. The asymptomatic MGD group had a distribution as follows: 33.5 ± 0.004 nm, 20%; 49.2 ± 0.041 nm, 25%; 62.9 ± 0.063 nm, 47%. The MGD group had a distribution as follows: 34.3 ± 0.004 nm, 34%; 53.7 ± 0.022 nm, 28%; 74.9 ± 0.060 nm, 16%. ConclusionsThe MGD and mixed groups had the largest percentages of TFLL thicknesses fall within the thinnest modes (peak 34.3 and 33.8 nm, respectively). These data show that measures of central tendency (e.g., averages, medians) do not fully appreciate the variable distributions of TFLL across disease spectra.

Triple-modality co-registered endoscope featuring wide-field reflectance imaging, and high-resolution multiphoton and optical coherence microscopy.

We present the design and feasibility testing of a multimodal co-registered endoscope based on a dual-path optical system integrated with a scanning piezo. This endoscope incorporates three different imaging modalities. A large field of view reflectance imaging system enables visualization of objects several millimeters in front of the endoscope, while optical coherence microscopy and multiphoton microscopy are employed in contact with tissue to further analyze suspicious areas. The optical system allows multiple different imaging modalities by employing a dual optical path. One path features a low numerical aperture and wide field of view to allow reflectance imaging of distant objects. The other path features a high numerical aperture and short working distance to allow microscopy techniques such as optical coherence microscopy and multiphoton microscopy. Images of test targets were obtained with each imaging modality to verify and characterize the imaging capabilities of the endoscope. The reflectance modality was demonstrated with a 561 nm laser to allow high contrast with blood vessels. It achieved a lateral resolution of 24.8 μm at 5 mm and a working distance from 5 mm to 30 mm. Optical coherence microscopy (OCM) was performed with a 1300 nm super-luminescent diode since this wavelength experiences low relative scattering to allow for deeper tissue imaging. Measured OCM lateral and axial resolution was 4.0 μm and 14.2 μm, respectively. Multiphoton microscopy (MPM) was performed with a custom 1400 nm femtosecond fiber laser, a wavelength suitable for exciting multiple exogenous and some endogenous fluorophores, as well as providing information on tissue composition through harmonic generation processes. A 4.0 μm MPM lateral resolution was measured.

Enhancement of knife-edge interferometry for edge topography characterization.

This paper introduces an optical measurement technique to enhance knife-edge interferometry (KEI) for edge topography characterization with a high resolution by shaping a beam of light incident on the sharp edge. The enhanced KEI forms spherical wavelets as a new light source by focusing a beam before the sharp edge by using an objective lens, and those wavelets interfere with the secondary wavelets diffracted at the sharp edge along the propagation direction. Unlike a conventional KEI that is limited to low spatial resolution due to a relatively large beam diameter, the enhanced KEI can increase the fringe spatial frequency and produce more data necessary for fringe analysis toward edge topography characterization. Edge samples with various edge conditions were used for validation. As a result, the enhanced KEI improved the resolution of edge topography characterization compared to the conventional KEI. This study has the potential to be utilized in high-resolution optical microscopy for edge topography characterization.

Agathoxylon santanensis sp. nov. from the Aptian Crato fossil Lagerstätte, Santana Formation, Araripe Basin, Brazil

The study of a petrified twig under high-resolution optical microscopy allowed for the first formal record of the morphogenus Agathoxylon for the late Aptian Crato Member (Santana Formation, Araripe Basin, northeastern Brazil) and the description of a new species, Agathoxylon santanensis. The wood is characterized by mostly (95%) araucarian triseriate alternate bordered pits with hexagonal boundaries in a compact arrangement, and cross-field pits with araucarioid organization. In addition to Agathoxyon-type of xylem, the preservation of a belt of stone cells and axial resin ducts in the non-functional phloem, and an attached leaf with parallel venation showing longitudinally oriented stomata point to a probable Araucariaceae affinity. The presence of Agathoxylon xylem associated with phloem of Araucariaceae affinity in the Tropical-Equatorial Hot Arid belt indicate that the parent plants survived in different climatic zones in the Early Cretaceous of Western Gondwana, from periequatorial to warm and cool-temperate belts. The general growth pattern suggests that the growth interruptions zones were caused by temporary water stress, which was the limiting factor for favorable growing.

Structural characterization and regulation of the mechanical properties of the carapace cuticle in tri-spine horseshoe crab (Tachypleus tridentatus)

Horseshoe crab (order Xiphosura) has a large and thick carapace that has evolved as a protective tool to defend against predators and resist impacts from surf-zone turbulence. The naturally occurring spatial variation in the mechanical properties of the carapace cuticle need to be investigated to understand their regulatory mechanism and the underlying design strategies. In this work, we used a combination of high-resolution optical microscopy, scanning electron microscopy, (SEM) and energy-dispersive X-ray spectroscopy (EDS) to evaluate the multiscale microstructure and elemental composition of the cuticle of tri-spine horseshoe crab (Tachypleus tridentatus). The moduli, ultimate strengths, and failure strains of the three individual layers and the entire cuticle were systematically characterized in both the dry and hydrated states. The failure behaviors and energy absorption of the cuticle involved stress stiffening, toughness mechanism and environmental adaptation were analyzed qualitatively and quantitatively and then correlated with the morphological features in different cuticle regions. The mechanical properties are primarily influenced by the endocuticle thickness ratio; a higher thickness ratio corresponds to more stacking of the vertical lamellae, leading to a lower modulus, weaker strength, and greater elongation of the endocuticle. Radial energy is absorbed primarily by the endocuticle, with the energy absorbed in the radial direction being nearly twice that absorbed in the circumferential direction. This is attributed to the larger failure strain and relatively small decrease in the stress plateau in the radial direction. The findings provide a deeper understanding of how nature modulates the cuticle's mechanical properties and inspiration for developing high-performance synthetic composites.

РАЗРАБОТКА ТЕХНОЛОГИЧЕСКОГО ПРОЦЕССА ИЗГОТОВЛЕНИЯ СВАРНЫХ КОНСТРУКЦИЙ

the main goal of this article is to obtain welded permanent joints of modern thermally hardened aluminum and aluminum-lithium alloys made by laser welding, having mechanical characteristics (temporary tensile resistance, yield strength, elongation at break) and structural-phase composition close to or equal to the base alloy. It is shown for the first time that by controlling the parameters of heat treatment of samples with a welded joint of all studied aluminum-lithium alloys, it is possible to purposefully influence the formation of the specified mechanical properties of the weld by changing the structural and phase composition of the weld. The evolution of the struc-tural and phase composition of welded joints of thermally hardened aluminum and aluminum-lithium alloys has been investigated using modern independent diagnostic methods: for the first time, the use of synchrotron radia-tion diffractometry in combination with high-resolution transmission, scanning electron and optical microscopy. The dependences of the increment of deformation under cyclic loading with amplitudes exceeding the elastic limit on temperature are established. For untreated welded joints, it was found that at +85 C, the inhomogeneity of the deformation increment increases, and its speed increases by 8 times for alloy 1461, 5 times for alloy 1420 and 1.5 times for alloy 1441. At a temperature of -60 0C, alloys 1420 and 1461 have hardening stages, during which the value of deformation decreases at given boundary stress values. At +20 0C, there is a uniform increment of defor-mation and an increase in the amplitude of deformation with an increase in the amplitude of stress. At +85 0C, the strain amplitude does not change with increasing stress amplitude, its value is 0.55-0.5 of the strain amplitude at +20 0C. Based on the research results, technological techniques have been developed that allow obtaining me-chanical characteristics and structural-phase compositions of welded joints close to the main alloy during laser welding of aviation thermally hardened aluminum and aluminum-lithium alloys of the Al-Mg-Cu. Al-Mg-Li, Al-Cu-Mg-Li, Al-Cu-Li systems.

Development of high-speed, integrated high-resolution optical coherence microscopy and dual-channel fluorescence microscopy for the simultaneous co-registration of reflectance and fluorescence signals

Optical coherence microscopy is an imaging technique capable of generating three-dimensional images of structures in tissue, but with limited functional imaging ability. Fluorescence microscopy offers functional information of cellular activities. The integration of both imaging modalities can enable the evaluation of the impact of structural information on cells activities. To develop an integrated system combining high-resolution optical coherence microscopy (HR-OCM) and dual-channel scanning confocal fluorescence microscopy (DC-SCFM) to enable the co-registration of structural and functional information. Different strategies to enable the simultaneous recording of information, as well as to overcome the focal plane mismatch between both imaging modalities were developed. The system's performances were evaluated in imaging fluorescence microspheres embedded in multi-layer tape and silicone phantom. HR-OCM achieved an axial resolution of 2.4-µm in tissue over an imaging depth of 1-mm. A speed of 250 kHz and a lateral resolution of 2-µm over a field-of-view of 1.1 mm ×1.1 mm were demonstrated with the combined system. DC-SCFM allowed to discriminate between green and red microspheres while HR-OCM enabled their depth localization. The combined system is synergistic in generating structural and functional information of samples, and has the potential to enable new investigations of biological processes in animal models.

High cycle fatigue behaviour of autoclave-cured woven carbon fibre-reinforced polymer composite gears

The high cycle fatigue behaviour of autoclave-cured carbon fibre-reinforced polymer (CFRP) composite gears is investigated. The CFRP gears were milled from a composite plate and tested in mesh with a steel drive gear under five torque loads ranging between 0.4 and 0.8 Nm in unlubricated conditions. A detailed gear damage analysis is conducted by employing scanning electron microscopy and high-resolution optical microscopy. Epoxy matrix microcracking is found to be the damage mechanism that leads to the final delamination failure. CFRP gears exhibited a significantly improved performance and a longer fatigue lifespan in comparison with the polymer and polymer composite gears.

Combining Optical Microscopy and X-ray Computed Tomography Reveals Novel Morphologies and Growth Processes of Methane Hydrate in Sand Pores

Understanding the mechanisms involved in the formation and growth of methane hydrate in marine sandy sediments is crucial for investigating the thermo-hydro-mechanical behavior of gas hydrate marine sediments. In this study, high-resolution optical microscopy and synchrotron X-ray computed tomography were used together to observe methane hydrate growing under excess gas conditions in a coarse sandy sediment. The high spatial and complementary temporal resolutions of these techniques allow growth processes and accompanying redistribution of water or brine to be observed over spatial scales down to the micrometre—i.e., well below pore size—and temporal scales below 1 s. Gas hydrate morphological and growth features that cannot be identified by X-ray computed tomography alone, such as hollow filaments, were revealed. These filaments sprouted from hydrate crusts at water–gas interfaces as water was being transported from their interior to their tips in the gas (methane), which extend in the µm/s range. Haines jumps are visualized when the growing hydrate crust hits a water pool, such as capillary bridges between grains or liquid droplets sitting on the substrate—a capillary-driven mechanism that has some analogy with cryogenic suction in water-bearing freezing soils. These features cannot be accounted for by the hydrate pore habit models proposed about two decades ago, which, in the absence of any observation at pore scale, were indeed useful for constructing mechanical and petrophysical models of gas hydrate-bearing sediments.

The micro and ultrastructural anatomy of bone spicules found in the osteochondral junction of bovine patellae with early joint degeneration.

The structural changes in the tissues of the osteochondral junction are a topic of interest, especially considering how bone changes are involved in the initiation and progression of osteoarthritis (OA). Our research group has previously demonstrated that at the cement line boundary between the zone of calcified cartilage (ZCC) and the subchondral bone, in mature bovine patellae with early OA, there are numerous bone spicules that have emerged from the underlying bone. These spicules contain a central vascular canal and a bone cuff. In this study, we use high-resolution differential interference contrast optical microscopy and scanning electron microscopy to compare the cartilage-bone junction of three groups of mature bovine patellae showing healthy to mild to moderately degenerate cartilage. The ZCC and bone junction was carefully examined to estimate the frequency of marrow spaces, bone spicules and fully formed bone bulges. The results reveal that bone spicules are associated with all grades of cartilage tissue studied, with the most occurring in the intermediate stages of tissue health. The micro and ultrastructure of the bone spicule are consistent with that of an osteon, especially those found in compression zones in long bones. Also considering the coexistence of marrow spaces and fully formed bone, this study suggests that these bone spicules arise similar to the formation of osteons in the bone remodelling process. The significance of this conclusion is in the way researchers approach the bone formation issue in the early degenerative joint. Instead of endochondral ossification, we propose that bone formation in OA is more akin to a combination of primary bone remodelling and de novo bone formation.

Microfluidics-Based Bioassays and Imaging of Plant Cells.

Many plant processes occur in the context of and in interaction with a surrounding matrix such as soil (e.g. root growth and root–microbe interactions) or surrounding tissues (e.g. pollen tube growth through the pistil), making it difficult to study them with high-resolution optical microscopy. Over the past decade, microfabrication techniques have been developed to produce experimental systems that allow researchers to examine cell behavior in microstructured environments that mimic geometrical, physical and/or chemical aspects of the natural growth matrices and that cannot be generated using traditional agar plate assays. These microfabricated environments offer considerable design flexibility as well as the transparency required for high-resolution, light-based microscopy. In addition, microfluidic platforms have been used for various types of bioassays, including cellular force assays, chemoattraction assays and electrotropism assays. Here, we review the recent use of microfluidic devices to study plant cells and organs, including plant roots, root hairs, moss protonemata and pollen tubes. The increasing adoption of microfabrication techniques by the plant science community may transform our approaches to investigating how individual plant cells sense and respond to changes in the physical and chemical environment.

Testing 1D and 2D single-sided NMR on Roman age waterlogged woods

Waterlogged archaeological wood can provide information on past human activities and technology but its structure may be modified due to microbial deterioration. Knowing its conservation state is fundamental for its restoration. Aim of this work was to test the use of non-destructive portable NMR for the microstructural characterization and preservation state of three archaeological wood samples (Roman age, 5th century AD). 1D T1 and T2 relaxation time distributions, as well as 2D T1-T2 and D-T2 distributions were measured by single-sided NMR and interpreted with the help of high resolution magnetic resonance imaging (MRI) and optical microscopy. Due to the complexity of the ancient wood samples, in this first study a multi-analytical approach was required. It allowed the characterization of both waterlogged softwood (spruce) and hardwood (chestnut and maple) by quantifying relaxation times and diffusion water components affected by the presence of degradation products such as fungi, paramagnetic agents, and microstructural changes. Optical microscopy was needed to investigate the sub-microscopic wood elements not resolved by MRI and validate indirect single-sided NMR investigations. Observations and results of this study will allow the improvement of single-sided NMR protocols for the analyses of archaeological wood in situ with portable NMR.

Isothermal equation of state of crystalline and glassy materials from optical measurements in diamond anvil cells.

Here, we present a method to study the equation of state of opaque amorphous and crystalline materials in diamond anvil cells. The approach is based on measurements of sample dimensions using high-resolution optical microscopy. Data on the volumetric strain as a function of pressure allow deriving the isothermal equation of state of the studied material. The analysis of optical images is fully automatized and allows measuring the sample dimensions with the precision of about 60nm. The methodology was validated by studying isothermal compression of ω-Ti up to 30GPa in a Ne pressure transmitting medium. Within the accuracy of the measurements, the bulk modulus of ω-Ti determined using optical microscopy was similar to that obtained from x-ray diffraction. For glassy carbon compressed to ∼30GPa, the previously unknown bulk modulus was found to be equal to K0 = 28 (2) GPa [K' = 5.5(5)].

Advanced Catalysts for the Oxygen Evolution Reaction Fabricated By Reactive Spray Deposition Technology: Degradation Mechanisms Governing the Performance Loss during the Long-Term Steady State Operation

Development of novel and improved catalysts and membrane electrode assemblies (MEAs) for proton exchange membrane (PEM) based energy conversion devices is of crucial importance for widespread application of the PEM fuel cells and electrolyzers. These PEM based devices are critical for the Hydrogen Economy (HE) implementation. The HE is the economy of the near future and is the only viable alternative to the current fossil fuel-based economy. This future green economy will eliminate the greenhouse gas emissions and stop the imminent global warming and climate change. Currently, the main challenges that the state-of-the-art MEAs are facing are: (i) high cost because of the high platinum group metals (PGM) loadings in their catalysts layers and time consuming and expensive multi-step fabrication processes; and (ii) poor durability caused by the instability of the catalysts and the materials [1, 2].Herein, we demonstrate the capabilities of the unique Reactive Spray Deposition Technology (RSDT) for fabrication of advanced catalysts for the oxygen evolution reaction (OER) and MEAs that could overcome these challenges. The RSDT is a flame assisted method [3, 4] that combines the catalysts synthesis and deposition directly on the PEM membrane in one-step, which results in fast and facile fabrication of large (up to 1000 cm2) MEAs for application in PEM fuel cells and electrolyzers [4]. In addition, this technology allows precise control of the composition, morphology, and particle size distribution of wide range of nanoparticles supported and unsupported on carbon, and thus ensures fine tuning of the catalysts’ activity and durability. Ir/IrOx unsupported catalysts fabricated by RSDT have been studied in half cell configuration by rotating disc electrode (RDE) technique in 0.1 M HClO4 and showed improved activity towards the OER in comparison to the state-of-the-art commercial IrO2 catalyst. Furthermore, MEAs with geometric area of 86 cm2 and one order of magnitude lower Ir loading in the anode catalyst layer in comparison to the state-of-the-art MEAs for PEM water electrolyzers [5], were fabricated by the RSDT and tested for 5000 hours at current density of 1.8 A cm-2, 50 oC, and 400 psi differential hydrogen pressure. Diagnostic tests that include polarization curves, electrochemical impedance spectroscopy, linear sweep voltammetry, and hydrogen crossover measurements were performed periodically in order to evaluate the cell performance change during the long-term durability test. After the test, the MEAs were disassembled and subjected to comprehensive post test analysis. A wide range of techniques including high-resolution TEM, STEM, EDS, SEM, ICP, XCT, XPS, and digital optical microscopy, have been used to study the degradation mechanisms governing the performance loss in the MEAs during the long-term steady state operation, and the results will be presented and discussed in detail in this talk.References https://www.energy.gov/sites/prod/files/2017/05/f34/fcto_myrdd_fuel_cells.pdf https://www.energy.gov/sites/prod/files/2015/06/f23/fcto_myrdd_production.pdf Kim, S., Myles, Maric, R., et al. Electrochimica Acta, 177, 190-200 (2015).Yu, H., Baricci, A., Bisello, A., Bonville, L., Maric, R., et al. Electrochimica Acta, 247, 1155-1168 (2017).Ayers, K. Current Opinion in Electrochemistry, 18, 9–15 (2019).

Corrosion of a chrome-moly pipe transporting sulfuric acid in a demineralization section: a failure analysis

PurposeThe purpose of this study was to carry out an analysis of the corrosion failure on a chrome-moly pipeline transporting highly concentrated sulfuric acid in a demineralization section at a petrochemical plant, along with the feasibility of using inhibitors to minimize the corrosive effects of sulfuric acid.Design/methodology/approachX-ray fluorescence spectroscopy, high-resolution optical microscopy, scanning electron microscopy, energy-dispersive X-ray spectroscopy and accelerated corrosion experiments (ACE) were performed.FindingsErosion-corrosion failure was confirmed by the significant reduction in thickness of the internal surface of the material exposed to sulfuric acid, as well as the formation of an oxide scale/layer. ACE accurately predicted high material loss from exposure to sulfuric acid. Moreover, adding ascorbic acid as a corrosion inhibitor (even at low concentrations) was found to reduce the oxidation by more than 50% in the presence of sulfuric acid.Originality/valueThe main idea/purpose of this work relies on the analysis of recurrent real-life corrosion-attributed failures that are common in industry but are not properly addressed for a variety of reasons, poor management and lack of corrosion preventive strategies being the main ones. This study once again highlights readily available solutions/implementations that are capable of not only addressing technically the issue investigated but also, and as important, economically. By using microscopic imaging, reliable well-tested and widely used characterization methods, all combined with basic experiments and tests, the nature of the repetitive failure investigated was clearly demonstrated as well as readily available alternatives to minimize it in the short term. Nevertheless, implementing material selection techniques appropriately as effective corrosion prevention/control and cost-saving strategies must be enforced in any process.

A statistical homogenization approach for incorporating fiber aspect ratio distribution in large area polymer composite deposition additive manufacturing property predictions

Assessing the material stiffness of fiber reinforced polymer composites deposited in Large Area Additive Manufacturing (LAAM) is needed to define the process-structure-property mapping for the LAAM technology. While the screw-extrusion-based LAAM systems yield a distribution of fiber aspect ratio (i.e., length to diameter ratio for cylindrical inclusions) within deposited beads, most composite micromechanical models ignore the fiber geometry variation and instead assume a single value of fiber aspect ratio. This paper presents a statistics-based homogenization approach for including the fiber aspect ratio distribution in the prediction of the elastic properties of an extruded polymer composite bead. The fiber length distribution of a 13 wt% Carbon Fiber reinforced Acrylonitrile Butadiene Styrene (CF-ABS) processed through a LAAM deposition system is measured using high resolution optical microscopy. The Weibull probability distribution function is employed to statistically describe the measured values. The fitted probability density function is then incorporated into a fiber orientation homogenization approach to compute the variability of the elastic properties of the extruded composite. Elastic properties predicted by our proposed method are shown to differ from those presented in prior studies that ignored fiber length variability. The fiber aspect ratio reduction from fiber length attrition during the LAAM single screw-extrusion is shown to decrease the predicted flow-direction effective elastic modulus by 7%. Elastic moduli computed using our measured fiber aspect ratio distribution and proposed homogenization approach compare well to reported data from previously associated experimental studies.

MOC Doped with Graphene Nanoplatelets: The Influence of the Mixture Preparation Technology on Its Properties.

The ongoing tendency to create environmentally friendly building materials is nowadays connected with the use of reactive magnesia-based composites. The aim of the presented research was to develop an ecologically sustainable composite material based on MOC (magnesium oxychloride cement) with excellent mechanical, chemical, and physical properties. The effect of the preparation procedure of MOC pastes doped with graphene nanoplatelets on their fresh and hardened properties was researched. One-step and two-step homogenization techniques were proposed as prospective tools for the production of MOC-based composites of advanced parameters. The conducted experiments and analyses covered X-ray fluorescence, scanning electron microscopy, energy-dispersive spectroscopy, high-resolution transmission electron microscopy, sorption analysis, X-ray diffraction, and optical microscopy. The viscosity of the fresh mixtures was monitored using a rotational viscometer. For the hardened composites, macro- and micro-structural parameters were measured together with the mechanical parameters. These tests were performed after 7 days and 14 days. The use of a carbon-based nanoadditive led to a significant drop in porosity, thus densifying the MOC matrix. Accordingly, the mechanical resistance was greatly improved by graphene nanoplatelets. The two-step homogenization procedure positively affected all researched functional parameters of the developed composites (e.g., the compressive strength increase of approximately 54% after 7 days, and 37% after 14 days, respectively) and can be recommended for the preparation of advanced functional materials reinforced with graphene.

Abstract P351: Grayscale Texture Feature Angular Second Moment Correlates With Collagen Alignment in Carotid Artery Plaques

Introduction: Grayscale (GS) texture features that examine homogeneity and echogenicity have been used to identify vulnerable plaques with in vivo ultrasound imaging have been shown to correlate with plaque tissue composition. However, the relationship of collagen fiber organization to GS texture features extracted from in vivo images is a novel idea to provide additional information about plaque structure. We hypothesize that collagen fiber alignment is clinically relevant to identify vulnerable plaques. The objective of this feasibility study was to use multiscale imaging (in vivo ultrasound and high resolution optical microscopy) to determine how GS texture features are related to plaque collagen structure. Methods: Participants (n=6) scheduled for clinically indicated carotid endarterectomy underwent in vivo carotid ultrasound imaging with texture feature extraction (spatial gray level dependence matrices method for calculating angular second moment [SGLDM-ASM] and grayscale median value [GSM]). Plaque specimens were sent to histopathology and stained with H&amp;E. The collagen fibers in the fibrous cap of the plaque histopathology slides were imaged with liquid crystal based polarization microscopy and quantified using an established software tool (CurveAlign). Correlations between collagen alignment coefficient (range 0-1, 1 represents perfectly aligned fibers) and the texture feature SGLDM-ASM (a measure of homogeneity, higher values are more homogenous) and GSM (a measure of echogenicity higher values are more echogenic) were examined. Results: Participants were mean (SD) 72.5 (6.1) years of age, had 71.67 (8.16) percent stenosis. The mean SGLDM-ASM was 0.0017 (0.0023), the mean SD GSM was 73.13 (30.98). SGLDM-ASM was significantly correlated to collagen alignment (r=0.83; p=0.028). There was no significant correlation detected between GSM and collagen alignment (r=-0.43;p=0.38). Conclusion: Results of this study indicate the potential role for using high resolution optical microscopy with ultrasound to characterize collagen fiber alignment in plaques with measures of homogeneity. Future studies are needed to see how multiscale imaging can be used to inform in vivo imaging for identification of vulnerable plaque features.

Influence of the cooling rate below Ms on the martensitic transformation in a low alloy medium-carbon steel

The influence of cooling rate below the martensite start temperature, Ms, on the kinetics of martensitic transformation in a medium carbon low alloy steel was determined using high resolution dilatometry, optical microscopy and X-ray diffraction techniques. A two-stage transformation was observed for slow cooling rates while at higher cooling rates, martensitic transformation occured through a single stage process. It is shown that the Koistinen–Marburger equation cannot adequately describe the observed two-stage transformation. A new equation is proposed in order to model the evolution of martensitic transformation by considering the influence of post Ms cooling rate. The method considers contributions from both, the initial austenite and the carbon enriched austenite. The underlying mechanisms are discussed and validated with experimental findings.

Effect of method of synthesis on antifungal ability of ZnO nanoparticles: Chemical route vs green route

To compare the antifungal effect of two nanomaterials (NMs), nanoparticles of zinc oxide were synthesized by a chemical route and zinc oxide-based nanobiohybrids were obtained using green synthesis in an extract of garlic (Allium sativum). The techniques of X-Ray Diffraction (XRD), Infrared (IR) and Ultraviolet Visible (UV-Vis) absorption spectroscopies and Scanning (SEM) and Transmission Electron Microscopies (TEM) were used to determine the characteristics of the nanomaterials synthesized. The results showed that the samples obtained were of nanometric size (< 100 nm). To compare their antifungal capacity, their effect on Cercospora sp. was evaluated. Test results showed that both nanomaterials had an antifungal capacity. The nanobiohybrids (green route) gave an inhibition of fungal growth of ˜72.4% while with the ZnO-NPs (chemical route), inhibition was ˜87.1%. Microstructural studies using High Resolution Optical Microscopy (HROM) and ultra-structural analysis using TEM carried out on the treated strains demonstrated the effect of the nanofungicides on the vegetative and reproductive structures, as well as on their cell wall. To account for the antifungal effect presented by ZnO-NPs and ZnO nanobiohybrids on the fungi tested, effects reported in the literature related to the action of nanomaterials on biological entities were considered. Specifically, we discuss the electrical interaction of the ZnO-NPs with the cell membrane and the biomolecules (proteins) present in the fungi, taking into account the n-type nature of the ZnO semiconductor and the electrical behavior of the fungal cell membrane and that of the proteins that make up the protein crown.