High-resolution Linkage Map Research Articles

An ultra-high density linkage map and QTL mapping for sex and growth-related traits of common carp (Cyprinus carpio).

High density genetic linkage maps are essential for QTL fine mapping, comparative genomics and high quality genome sequence assembly. In this study, we constructed a high-density and high-resolution genetic linkage map with 28,194 SNP markers on 14,146 distinct loci for common carp based on high-throughput genotyping with the carp 250 K single nucleotide polymorphism (SNP) array in a mapping family. The genetic length of the consensus map was 10,595.94 cM with an average locus interval of 0.75 cM and an average marker interval of 0.38 cM. Comparative genomic analysis revealed high level of conserved syntenies between common carp and the closely related model species zebrafish and medaka. The genome scaffolds were anchored to the high-density linkage map, spanning 1,357 Mb of common carp reference genome. QTL mapping and association analysis identified 22 QTLs for growth-related traits and 7 QTLs for sex dimorphism. Candidate genes underlying growth-related traits were identified, including important regulators such as KISS2, IGF1, SMTLB, NPFFR1 and CPE. Candidate genes associated with sex dimorphism were also identified including 3KSR and DMRT2b. The high-density and high-resolution genetic linkage map provides an important tool for QTL fine mapping and positional cloning of economically important traits, and improving common carp genome assembly.

The Asian arowana (Scleropages formosus) genome provides new insights into the evolution of an early lineage of teleosts.

The Asian arowana (Scleropages formosus), one of the world’s most expensive cultivated ornamental fishes, is an endangered species. It represents an ancient lineage of teleosts: the Osteoglossomorpha. Here, we provide a high-quality chromosome-level reference genome of a female golden-variety arowana using a combination of deep shotgun sequencing and high-resolution linkage mapping. In addition, we have also generated two draft genome assemblies for the red and green varieties. Phylogenomic analysis supports a sister group relationship between Osteoglossomorpha (bonytongues) and Elopomorpha (eels and relatives), with the two clades together forming a sister group of Clupeocephala which includes all the remaining teleosts. The arowana genome retains the full complement of eight Hox clusters unlike the African butterfly fish (Pantodon buchholzi), another bonytongue fish, which possess only five Hox clusters. Differential gene expression among three varieties provides insights into the genetic basis of colour variation. A potential heterogametic sex chromosome is identified in the female arowana karyotype, suggesting that the sex is determined by a ZW/ZZ sex chromosomal system. The high-quality reference genome of the golden arowana and the draft assemblies of the red and green varieties are valuable resources for understanding the biology, adaptation and behaviour of Asian arowanas.

High-resolution genetic linkage mapping, high-temperature tolerance and growth-related quantitative trait locus (QTL) identification in Marsupenaeus japonicus.

The Kuruma prawn, Marsupenaeus japonicus, is one of the most promising marine invertebrates in the industry in Asia, Europe and Australia. However, the increasing global temperatures result in considerable economic losses in M. japonicus farming. In the present study, to select genetically improved animals for the sustainable development of the Kuruma prawn industry, a high-resolution genetic linkage map and quantitative trait locus (QTL) identification were performed using the RAD technology. The maternal map contained 5849 SNP markers and spanned 3127.23cM, with an average marker interval of 0.535cM. Instead, the paternal map contained 3927 SNP markers and spanned 3326.19cM, with an average marker interval of 0.847cM. The consensus map contained 9289 SNP markers and spanned 3610.90cM, with an average marker interval of 0.388cM and coverage of 99.06% of the genome. The markers were grouped into 41 linkage groups in the maps. Significantly, negative correlation was detected between high-temperature tolerance (UTT) and body weight (BW). The QTL mapping revealed 129 significant QTL loci for UTT and four significant QTL loci for BW at the genome-wide significance threshold. Among these QTLs, 129 overlapped with linked SNPs, and the remaining four were located in regions between contiguous SNPs. They explained the total phenotypic variance ranging from 8.9 to 12.4%. Because of a significantly negative correlation between growth and high-temperature tolerance, we demonstrate that this high-resolution linkage map and QTLs would be useful for further marker-assisted selection in the genetic improvement of M. japonicus.

Development of Gene-Based SSR Markers in Rice Bean (Vigna umbellata L.) Based on Transcriptome Data.

Rice bean (Vigna umbellata (Thunb.) Ohwi & Ohashi) is a warm season annual legume mainly grown in East Asia. Only scarce genomic resources are currently available for this legume crop species and no simple sequence repeat (SSR) markers have been specifically developed for rice bean yet. In this study, approximately 26 million high quality cDNA sequence reads were obtained from rice bean using Illumina paired-end sequencing technology and assembled into 71,929 unigenes with an average length of 986 bp. Of these unigenes, 38,840 (33.2%) showed significant similarity to proteins in the NCBI non-redundant protein and nucleotide sequence databases. Furthermore, 30,170 (76.3%) could be classified into gene ontology categories, 25,451 (64.4%) into Swiss-Prot categories and 21,982 (55.6%) into KOG database categories (E-value < 1.0E-5). A total of 9,301 (23.5%) were mapped onto 118 pathways using the Kyoto Encyclopedia of Genes and Genome (KEGG) pathway database. A total of 3,011 genic SSRs were identified as potential molecular markers. AG/CT (30.3%), AAG/CTT (8.1%) and AGAA/TTCT (20.0%) are the three main repeat motifs. A total of 300 SSR loci were randomly selected for validation by using PCR amplification. Of these loci, 23 primer pairs were polymorphic among 32 rice bean accessions. A UPGMA dendrogram revealed three major clusters among 32 rice bean accessions. The large number of SSR-containing sequences and genic SSRs in this study will be valuable for the construction of high-resolution genetic linkage maps, association or comparative mapping and genetic analyses of various Vigna species.

Detection of Growth-Related Quantitative Trait Loci and High-Resolution Genetic Linkage Maps Using Simple Sequence Repeat Markers in the Kelp Grouper (Epinephelus bruneus).

To initiate breeding programs for kelp grouper (Epinephelus bruneus), the establishment of genetic linkage maps becomes essential accompanied by the search for quantitative trait loci (QTLs) that may be utilized in selection programs. We constructed a high-resolution genetic linkage map using 1055 simple sequence repeat (SSR) markers in an F1 family. Genome-wide and chromosome-wide significances of growth-related QTLs (body weight: BW and total length: TL) were detected using non-parametric mapping, Kruskal-Wallis analysis, simple interval mapping (IM), and a permutation test (PT). Two stages and two families of fish were used to confirm the QTL regions. Ultimately, 714 SSR markers were matched that evenly covered the 24 linkage groups. In total, 509 and 512 markers were localized to the female and male maps, respectively. The genome lengths were approximately 1475.95 and 1370.39cM and covered 84.68 and 83.21% of the genome, with an average interval of 4.1 and 4.0cM, in females and males, respectively. One major QTL affecting BW and TL was found on linkage group EBR 17F that identified for 1% of the genome-wide significance and accounted for 14.6-18.9% and 14.7-18.5% of the phenotypic variance, and several putative QTL with 5% chromosome-wide significance were detected on eight linkage groups. Furthermore, the confirmed results of the regions harboring the major and putative QTLs showed consistent significant experiment-wide values of 1 and 5% as well as a chromosome-wide value of 5%. We identified growth-related QTLs that could be applied to find candidate genes for growth traits in further studies and potentially useful in marker assisted selection (MAS) breeding.

Detection of Growth-Related Quantitative Trait Loci and High-Resolution Genetic Linkage Maps Using Simple Sequence Repeat Markers in the Kelp Grouper (Epinephelus bruneus).

To initiate breeding programs for kelp grouper (Epinephelus bruneus), the establishment of genetic linkage maps becomes essential accompanied by the search for quantitative trait loci that may be utilized in selection programs. We constructed a high-resolution genetic linkage map using 1055 simple sequence repeat (SSR) markers in an F1 family. Genome-wide and chromosome-wide significances of growth-related quantitative trait loci (QTLs) (body weight (BW) and total length (TL)) were detected using non-parametric mapping, Kruskal-Wallis (K-W) analysis, simple interval mapping (IM) and a permutation test (PT). Two stages and two families of fish were used to confirm the QTL regions. Ultimately, 714 SSR markers were matched that evenly covered the 24 linkage groups. In total, 509 and 512 markers were localized to the female and male maps, respectively. The genome lengths were approximately 1475.95 and 1370.39 cM and covered 84.68 and 83.21 % of the genome, with an average interval of 4.1 and 4.0 cM, in females and males, respectively. One major QTL affecting BW and TL was found on linkage group EBR 17F that identified for 1 % of the genome-wide significance and accounted for 14.6–18.9 and 14.7–18.5 % of the phenotypic variance, and several putative QTL with 5 % chromosome-wide significance were detected on eight linkage groups. Furthermore, the confirmed results of the regions harboring the major and putative QTLs showed consistent significant experiment-wide values of 1 and 5 % as well as a chromosome-wide value of 5 %. We identified growth-related QTLs that could be applied to find candidate genes for growth traits in further studies, and potentially useful in MAS breeding.Electronic supplementary materialThe online version of this article (doi:10.1007/s10126-015-9673-5) contains supplementary material, which is available to authorized users.

Genetic architecture of growth traits in Populus revealed by integrated quantitative trait locus (QTL) analysis and association studies.

Deciphering the genetic architecture underlying polygenic traits in perennial species can inform molecular marker-assisted breeding. Recent advances in high-throughput sequencing have enabled strategies that integrate linkage-linkage disequilibrium (LD) mapping in Populus. We used an integrated method of quantitative trait locus (QTL) dissection with a high-resolution linkage map and multi-gene association mapping to decipher the nature of genetic architecture (additive, dominant, and epistatic effects) of potential QTLs for growth traits in a Populus linkage population (1200 progeny) and a natural population (435 individuals). Seventeen QTLs for tree height, diameter at breast height, and stem volume mapped to 11 linkage groups (logarithm of odds (LOD) ≥ 2.5), and explained 2.7-18.5% of the phenotypic variance. After comparative mapping and transcriptome analysis, 187 expressed genes (10 046 common single nucleotide polymorphisms (SNPs)) were selected from the segmental homology regions (SHRs) of 13 QTLs. Using multi-gene association models, we observed 202 significant SNPs in 63 promising genes from 10 QTLs (P ≤ 0.0001; FDR ≤ 0.10) that exhibited reproducible associations with additive/dominant effects, and further determined 11 top-ranked genes tightly linked to the QTLs. Epistasis analysis uncovered a uniquely interconnected gene-gene network for each trait. This study opens up opportunities to uncover the causal networks of interacting genes in plants using an integrated linkage-LD mapping approach.

A genome-scale integrated approach aids in genetic dissection of complex flowering time trait in chickpea.

A combinatorial approach of candidate gene-based association analysis and genome-wide association study (GWAS) integrated with QTL mapping, differential gene expression profiling and molecular haplotyping was deployed in the present study for quantitative dissection of complex flowering time trait in chickpea. Candidate gene-based association mapping in a flowering time association panel (92 diverse desi and kabuli accessions) was performed by employing the genotyping information of 5724 SNPs discovered from 82 known flowering chickpea gene orthologs of Arabidopsis and legumes as well as 832 gene-encoding transcripts that are differentially expressed during flower development in chickpea. GWAS using both genome-wide GBS- and candidate gene-based genotyping data of 30,129 SNPs in a structured population of 92 sequenced accessions (with 200-250 kb LD decay) detected eight maximum effect genomic SNP loci (genes) associated (34% combined PVE) with flowering time. Six flowering time-associated major genomic loci harbouring five robust QTLs mapped on a high-resolution intra-specific genetic linkage map were validated (11.6-27.3% PVE at 5.4-11.7 LOD) further by traditional QTL mapping. The flower-specific expression, including differential up- and down-regulation (>three folds) of eight flowering time-associated genes (including six genes validated by QTL mapping) especially in early flowering than late flowering contrasting chickpea accessions/mapping individuals during flower development was evident. The gene haplotype-based LD mapping discovered diverse novel natural allelic variants and haplotypes in eight genes with high trait association potential (41% combined PVE) for flowering time differentiation in cultivated and wild chickpea. Taken together, eight potential known/candidate flowering time-regulating genes [efl1 (early flowering 1), FLD (Flowering locus D), GI (GIGANTEA), Myb (Myeloblastosis), SFH3 (SEC14-like 3), bZIP (basic-leucine zipper), bHLH (basic helix-loop-helix) and SBP (SQUAMOSA promoter binding protein)], including novel markers, QTLs, alleles and haplotypes delineated by aforesaid genome-wide integrated approach have potential for marker-assisted genetic improvement and unravelling the domestication pattern of flowering time in chickpea.

High density linkage mapping of genomic and transcriptomic SNPs for synteny analysis and anchoring the genome sequence of chickpea.

This study presents genome-wide discovery of SNPs through next generation sequencing of the genome of Cicer reticulatum. Mapping of the C. reticulatum sequenced reads onto the draft genome assembly of C. arietinum (desi chickpea) resulted in identification of 842,104 genomic SNPs which were utilized along with an additional 36,446 genic SNPs identified from transcriptome sequences of the aforementioned varieties. Two new chickpea Oligo Pool All (OPAs) each having 3,072 SNPs were designed and utilized for SNP genotyping of 129 Recombinant Inbred Lines (RILs). Using Illumina GoldenGate Technology genotyping data of 5,041 SNPs were generated and combined with the 1,673 marker data from previously published studies, to generate a high resolution linkage map. The map comprised of 6698 markers distributed on eight linkage groups spanning 1083.93 cM with an average inter-marker distance of 0.16 cM. Utility of the present map was demonstrated for improving the anchoring of the earlier reported draft genome sequence of desi chickpea by ~30% and that of kabuli chickpea by 18%. The genetic map reported in this study represents the most dense linkage map of chickpea , with the potential to facilitate efficient anchoring of the draft genome sequences of desi as well as kabuli chickpea varieties.

Transcriptome sequencing of mung bean (Vigna radiate L.) genes and the identification of EST-SSR markers.

Mung bean (Vigna radiate (L.) Wilczek) is an important traditional food legume crop, with high economic and nutritional value. It is widely grown in China and other Asian countries. Despite its importance, genomic information is currently unavailable for this crop plant species or some of its close relatives in the Vigna genus. In this study, more than 103 million high quality cDNA sequence reads were obtained from mung bean using Illumina paired-end sequencing technology. The processed reads were assembled into 48,693 unigenes with an average length of 874 bp. Of these unigenes, 25,820 (53.0%) and 23,235 (47.7%) showed significant similarity to proteins in the NCBI non-redundant protein and nucleotide sequence databases, respectively. Furthermore, 19,242 (39.5%) could be classified into gene ontology categories, 18,316 (37.6%) into Swiss-Prot categories and 10,918 (22.4%) into KOG database categories (E-value < 1.0E-5). A total of 6,585 (8.3%) were mapped onto 244 pathways using the Kyoto Encyclopedia of Genes and Genome (KEGG) pathway database. Among the unigenes, 10,053 sequences contained a unique simple sequence repeat (SSR), and 2,303 sequences contained more than one SSR together in the same expressed sequence tag (EST). A total of 13,134 EST-SSRs were identified as potential molecular markers, with mono-nucleotide A/T repeats being the most abundant motif class and G/C repeats being rare. In this SSR analysis, we found five main repeat motifs: AG/CT (30.8%), GAA/TTC (12.6%), AAAT/ATTT (6.8%), AAAAT/ATTTT (6.2%) and AAAAAT/ATTTTT (1.9%). A total of 200 SSR loci were randomly selected for validation by PCR amplification as EST-SSR markers. Of these, 66 marker primer pairs produced reproducible amplicons that were polymorphic among 31 mung bean accessions selected from diverse geographical locations. The large number of SSR-containing sequences found in this study will be valuable for the construction of a high-resolution genetic linkage maps, association or comparative mapping and genetic analyses of various Vigna species.

Evolution of Tibetan wild boars

Evolution of Tibetan wild boars

A high-resolution genetic linkage map of soybean based on 357 recombinant inbred lines genotyped with BARCSoySNP6K

The objective of this study was to construct a high-density genetic map of soybean (Glycine max L. Merr) using a high-throughput single nucleotide polymorphism (SNP) genotyping on 357 F7 recombinant inbred lines from a cross of ‘Wyandot’ × PI 567301B. Of 5,403 SNP loci scored from the Infinium BARCSoySNP6K BeadChip array, 2,585 (48 %) were polymorphic between the two parents and subsequently 2,563 SNPs remained after filtering for minor allele frequency, heterozygosity, and missing data. A total of 2,545 SNPs were mapped into 20 linkage groups corresponding to the 20 chromosomes of soybean. The total length of the map was 2,346 cM with 2,213 unique SNP loci with 86 to 162 unique loci per chromosome. Average marker interval ranged from 0.9 to 1.3 cM with an overall mean of 1.1 cM, but 22 marker intervals were still greater than 10 cM. Colinear relationship was observed between genetic (cM) and physical positions (Mb) of SNPs for most of the genome, highlighting the improvements in the updated soybean genome assembly Glyma.Wm82.a2 in comparison with the previous Glyma.Wm82.a1. This high-density genetic map shows the utility of the BARCSoySNP6K BeadChip array and will lead to a better understanding of the genetic architecture of complex traits and identification of SNPs tightly linked to QTL for many important soybean traits.

Genetic analysis of flag leaf size and candidate genes determination of a major QTL for flag leaf width in rice.

BackgroundFlag leaf is the most essential organ for photosynthesis in rice and its size plays an important role in rice breeding for ideal plant-type. Flag leaf size affect photosynthesis to a certain extent, thereby influencing rice production. Several genes controlling leaf size and shape have been identified with mutants. Although a number of quantitative trait loci (QTLs) for leaf size and shape have been detected on 12 chromosomes with different populations of rice, few of them were cloned.ResultsThe pair-wise correlation analysis was conducted on length, width and length-width ratio of the flag leaf, and yield per plant in the core recombinant inbred lines of Liang-You-Pei-Jiu (LYP9) developed in Hainan and Hangzhou. There were significant correlations among the three flag leaf size and shape traits. Interestingly, a positive correlation was found between flag leaf width and yield per plant. Based on the high-resolution linkage map we constructed before, 43 QTLs were detected for three flag leaf size and shape traits and yield per plant, among which 31 QTLs were unreported so far. Seven QTLs were identified common in two environments. And qFLW7.2, a new major QTL for flag leaf width, was fine mapped within 27.1 kb region on chromosome 7. Both qFLW7.2 and qPY7 were located in the interval of 45.30 ~ 53.34 cM on chromosome 7, which coincided with the relationship between yield per plant (PY) and flag leaf width (FLW).ConclusionqFLW7.2, which explained 14% of the phenotypic variation, increased flag leaf width with 93–11 allele. Two candidate genes were selected based on sequence variation and expression difference between two parents, which facilitated further QTL cloning and molecular breeding in super rice.

A gene-derived SNP-based high resolution linkage map of carrot including the location of QTL conditioning root and leaf anthocyanin pigmentation.

BackgroundPurple carrots accumulate large quantities of anthocyanins in their roots and leaves. These flavonoid pigments possess antioxidant activity and are implicated in providing health benefits. Informative, saturated linkage maps associated with well characterized populations segregating for anthocyanin pigmentation have not been developed. To investigate the genetic architecture conditioning anthocyanin pigmentation we scored root color visually, quantified root anthocyanin pigments by high performance liquid chromatography in segregating F2, F3 and F4 generations of a mapping population, mapped quantitative trait loci (QTL) onto a dense gene-derived single nucleotide polymorphism (SNP)-based linkage map, and performed comparative trait mapping with two unrelated populations.ResultsRoot pigmentation, scored visually as presence or absence of purple coloration, segregated in a pattern consistent with a two gene model in an F2, and progeny testing of F3-F4 families confirmed the proposed genetic model. Purple petiole pigmentation was conditioned by a single dominant gene that co-segregates with one of the genes conditioning root pigmentation. Root total pigment estimate (RTPE) was scored as the percentage of the root with purple color.All five anthocyanin glycosides previously reported in carrot, as well as RTPE, varied quantitatively in the F2 population. For the purpose of QTL analysis, a high resolution gene-derived SNP-based linkage map of carrot was constructed with 894 markers covering 635.1 cM with a 1.3 cM map resolution. A total of 15 significant QTL for all anthocyanin pigments and for RTPE mapped to six chromosomes. Eight QTL with the largest phenotypic effects mapped to two regions of chromosome 3 with co-localized QTL for several anthocyanin glycosides and for RTPE. A single dominant gene conditioning anthocyanin acylation was identified and mapped.Comparative mapping with two other carrot populations segregating for purple color indicated that carrot anthocyanin pigmentation is controlled by at least three genes, in contrast to monogenic control reported previously.ConclusionsThis study generated the first high resolution gene-derived SNP-based linkage map in the Apiaceae. Two regions of chromosome 3 with co-localized QTL for all anthocyanin pigments and for RTPE, largely condition anthocyanin accumulation in carrot roots and leaves. Loci controlling root and petiole anthocyanin pigmentation differ across diverse carrot genetic backgrounds.Electronic supplementary materialThe online version of this article (doi:10.1186/1471-2164-15-1118) contains supplementary material, which is available to authorized users.

Construction of a high-density, high-resolution genetic map and its integration with BAC-based physical map in channel catfish.

Construction of genetic linkage map is essential for genetic and genomic studies. Recent advances in sequencing and genotyping technologies made it possible to generate high-density and high-resolution genetic linkage maps, especially for the organisms lacking extensive genomic resources. In the present work, we constructed a high-density and high-resolution genetic map for channel catfish with three large resource families genotyped using the catfish 250K single-nucleotide polymorphism (SNP) array. A total of 54,342 SNPs were placed on the linkage map, which to our knowledge had the highest marker density among aquaculture species. The estimated genetic size was 3,505.4 cM with a resolution of 0.22 cM for sex-averaged genetic map. The sex-specific linkage maps spanned a total of 4,495.1 cM in females and 2,593.7 cM in males, presenting a ratio of 1.7 : 1 between female and male in recombination fraction. After integration with the previously established physical map, over 87% of physical map contigs were anchored to the linkage groups that covered a physical length of 867 Mb, accounting for ∼90% of the catfish genome. The integrated map provides a valuable tool for validating and improving the catfish whole-genome assembly and facilitates fine-scale QTL mapping and positional cloning of genes responsible for economically important traits.

High-resolution genetic mapping and physical map construction for the fertility restorer Rfm1 locus in barley.

High-resolution genetic linkage mapping and BAC physical mapping narrowed the fertility restorer locus Rfm1 in barley to a sub-centimorgan genetic interval and a 208-kb physical interval. Rfm1 restores the fertility of msm1 and msm2 male-sterile cytoplasms in barley. The fertility restoration gene is located on the short arm of chromosome 6H (6HS), and we pursued a positional cloning of this gene. Starting from a previous result that has delimited Rfm1 within a 10.8 cM region on 6HS, we developed novel CAPS and SSR markers tightly linked to the gene in barley using the sequence information from the syntenic region of rice and barley genome assemblies. Next, we performed fine mapping of the Rfm1 locus. To isolate recombinants, we surveyed 3,638 F2 plants derived from a cross between the CMS strain and the Rf strain with adjacent markers (NAS2090 and NAS1080). This analysis identified 175 recombinant plants from the F2 population to build a high-resolution map with nine markers tightly linked to the Rfm1 locus. Rfm1 was located within the 0.14 cM region delimited by two markers (NAS9113 and NAS9200). Using these flanking markers as well as marker cosegregating with Rfm1 (NAS9133), we screened the BAC libraries of the cultivar Morex, an rfm1 carrier. We isolated 11 BAC clones and constructed a BAC physical map using their fingerprints. Finally, we delimited the Rfm1 locus encompassing the rfm1 allele on a 208-kb contig composed of three minimally overlapping BAC clones. This precise localization of the Rfm1 locus in the barley genome is expected to greatly accelerate the future map-based cloning of the Rfm1 gene by sequence analysis and its genetic transformation for the complementation of cytoplasmic male-sterile plants.

High-density single nucleotide polymorphism (SNP) array mapping in Brassica oleracea: identification of QTL associated with carotenoid variation in broccoli florets.

A high-resolution genetic linkage map of B. oleracea was developed from a B. napus SNP array. The work will facilitate genetic and evolutionary studies in Brassicaceae. A broccoli population, VI-158 × BNC, consisting of 150 F2:3 families was used to create a saturated Brassica oleracea (diploid: CC) linkage map using a recently developed rapeseed (Brassica napus) (tetraploid: AACC) Illumina Infinium single nucleotide polymorphism (SNP) array. The map consisted of 547 non-redundant SNP markers spanning 948.1 cM across nine chromosomes with an average interval size of 1.7 cM. As the SNPs are anchored to the genomic reference sequence of the rapid cycling B. oleracea TO1000, we were able to estimate that the map provides 96 % coverage of the diploid genome. Carotenoid analysis of 2 years data identified 3 QTLs on two chromosomes that are associated with up to half of the phenotypic variation associated with the accumulation of total or individual compounds. By searching the genome sequences of the two related diploid species (B. oleracea and B. rapa), we further identified putative carotenoid candidate genes in the region of these QTLs. This is the first description of the use of a B. napus SNP array to rapidly construct high-density genetic linkage maps of one of the constituent diploid species. The unambiguous nature of these markers with regard to genomic sequences provides evidence to the nature of genes underlying the QTL, and demonstrates the value and impact this resource will have on Brassica research.

A high-resolution linkage map of the Rfd1, a restorer-of-fertility locus for cytoplasmic male sterility in radish (Raphanus sativus L.) produced by a combination of bulked segregant analysis and RNA-Seq.

We utilized a combination of BSA and RNA-Seq to identify SNPs linked to the Rfd1 locus, a restorer-of-fertility gene in radish. A high-density linkage map was constructed using this approach. Male fertility of cytoplasmic male sterility conditioned by the Dongbu cytoplasmic and genic male-sterility cytoplasm can be restored by a restorer-of-fertility locus, Rfd1, in radish. To construct a high-density linkage map and to identify a candidate gene for the Rfd1 locus, bulked segregant analysis and RNA-seq approaches were combined. A total of 26 and 28 million reads produced from male-fertile and male-sterile bulked RNA were mapped to the radish reference unigenes. After stringent screening of SNPs, 327 reliable SNPs of 109 unigenes were selected. Arabidopsis homologs for 101 of the 109 genes were clustered around the 4,000 kb region of Arabidopsis chromosome 3, which was syntenic to the Rfd1 flanking region. Since the reference unigene set was incomplete, the contigs were de novo assembled to identify 134 contigs harboring SNPs. Most of SNP-containing contigs were also clustered on the same syntenic region in Arabidopsis chromosome. A total of 21 molecular markers positioned within a 2.1 cM interval including the Rfd1 locus were developed, based on the selected unigenes and contigs. A segregating population consisting of 10,459 individuals was analyzed to identify recombinants containing crossovers within this interval. A total of 284 identified recombinants were then used to construct a high-density map, which delimited the Rfd1 locus into an 83-kb syntenic interval of Arabidopsis chromosome 3. Since no candidate gene, such as a pentatricopeptide repeat (PPR)-coding gene, was found in this interval, 231 unigenes and 491 contigs containing putative PPR motifs were analyzed further, but no PPR gene in linkage disequilibrium with the Rfd1 locus could be found.

High-resolution sex-specific linkage maps of the mouse reveal polarized distribution of crossovers in male germline.

Since the publication of the first comprehensive linkage map for the laboratory mouse, the architecture of recombination as a basic biological process has become amenable to investigation in mammalian model organisms. Here we take advantage of high-density genotyping and the unique pedigree structure of the incipient Collaborative Cross to investigate the roles of sex and genetic background in mammalian recombination. Our results confirm the observation that map length is longer when measured through female meiosis than through male meiosis, but we find that this difference is modified by genotype at loci on both the X chromosome and the autosomes. In addition, we report a striking concentration of crossovers in the distal ends of autosomes in male meiosis that is absent in female meiosis. The presence of this pattern in both single- and double-recombinant chromosomes, combined with the absence of a corresponding asymmetry in the distribution of double-strand breaks, indicates a regulated sequence of events specific to male meiosis that is anchored by chromosome ends. This pattern is consistent with the timing of chromosome pairing and evolutionary constraints on male recombination. Finally, we identify large regions of reduced crossover frequency that together encompass 5% of the genome. Many of these “cold regions” are enriched for segmental duplications, suggesting an inverse local correlation between recombination rate and mutation rate for large copy number variants.

The barley Frost resistance-H2 locus

Frost resistance-H2 (Fr-H2) is a major QTL affecting freezing tolerance in barley, yet its molecular basis is still not clearly understood. To gain a better insight into the structural characterization of the locus, a high-resolution linkage map developed from the Nure × Tremois cross was initially implemented to map 13 loci which divided the 0.602 cM total genetic distance into ten recombination segments. A PCR-based screening was then applied to identify positive bacterial artificial chromosome (BAC) clones from two genomic libraries of the reference genotype Morex. Twenty-six overlapping BACs from the integrated physical-genetic map were 454 sequenced. Reads assembled in contigs were subsequently ordered, aligned and manually curated in 42 scaffolds. In a total of 1.47 Mbp, 58 protein-coding sequences were identified, 33 of which classified according to similarity with sequences in public databases. As three complete barley C-repeat Binding Factors (HvCBF) genes were newly identified, the locus contained13 full-length HvCBFs, four Related to AP2 Triticeae (RAPT) genes, and at least five CBF pseudogenes. The final overall assembly of Fr-H2 includes more than 90 % of target region: all genes were identified along the locus, and a general survey of Repetitive Elements obtained. We believe that this gold-standard sequence for the Morex Fr-H2 will be a useful genomic tool for structural and evolutionary comparisons with Fr-H2 in winter-hardy cultivars along with Fr-2 of other Triticeae crops.