High Resolution Crop Research Articles

The Self-Supervised Spectral–Spatial Vision Transformer Network for Accurate Prediction of Wheat Nitrogen Status from UAV Imagery

Nitrogen (N) fertilizer is routinely applied by farmers to increase crop yields. At present, farmers often over-apply N fertilizer in some locations or at certain times because they do not have high-resolution crop N status data. N-use efficiency can be low, with the remaining N lost to the environment, resulting in higher production costs and environmental pollution. Accurate and timely estimation of N status in crops is crucial to improving cropping systems’ economic and environmental sustainability. Destructive approaches based on plant tissue analysis are time consuming and impractical over large fields. Recent advances in remote sensing and deep learning have shown promise in addressing the aforementioned challenges in a non-destructive way. In this work, we propose a novel deep learning framework: a self-supervised spectral–spatial attention-based vision transformer (SSVT). The proposed SSVT introduces a Spectral Attention Block (SAB) and a Spatial Interaction Block (SIB), which allows for simultaneous learning of both spatial and spectral features from UAV digital aerial imagery, for accurate N status prediction in wheat fields. Moreover, the proposed framework introduces local-to-global self-supervised learning to help train the model from unlabelled data. The proposed SSVT has been compared with five state-of-the-art models including: ResNet, RegNet, EfficientNet, EfficientNetV2, and the original vision transformer on both testing and independent datasets. The proposed approach achieved high accuracy (0.96) with good generalizability and reproducibility for wheat N status estimation.

Biophysical effects of paddy rice expansion on land surface temperature in Northeastern Asia

The pending extensive rice expansion in northeastern Asia, especially in northeast China, affects regional climate by altering both biogeochemical and biophysical processes. While the biogeochemical effects (e.g., CO2, CH4) of rice expansion have attracted plenty of attention, its biophysical effects have not been well documented, especially its influences on diurnal and seasonal land surface temperature (LST). In this study, we used a pair-wise comparison approach to examine biophysical effects of paddy rice expansion at different temporal scales (diurnal and seasonal) in northeast China, based on satellite-derived biophysical proxies and a high-resolution crop map in 2017. We found that the daily mean LST of rice paddies was 0.5 °C lower than that of corn and soybean fields during the growing season (from May to September), as a result of daytime cooling (-1.8 and -2.0 °C) and nighttime warming (0.8 and 1.1 °C), which subsequently led to a narrower diurnal LST range (-2.6 and -3.0 °C) than in upland crops (i.e. corn and soybean). The cooling effects were stronger in the early period of the growing season (May and June) than in the late season (July to September). Using a temperature response model, we found that the nonradiative processes (i.e., evapotranspiration and sensible heat) dominated the LST response in paddy rice, while the radiative process (i.e., albedo) played a secondary role. The daytime cooling and nighttime warming implies that we need to consider the unsymmetrical diurnal LST dynamics when evaluating the short-term effects of paddy rice expansion. Stronger cooling effects in the early growing season has to be accounted for when modeling its biophysical impacts at seasonal scale. This study explained the local climate effects of rice expansion through the biophysical mechanism with both radiative and nonradiative controls on the surface energy balance, which can contribute to improved modeling of biophysical effects of land use change.

RDA- CNN: Enhanced Super Resolution Method for Rice Plant Disease Classification

In the field of agriculture, the development of an early warning diagnostic system is essential for timely detection and accurate diagnosis of diseases in rice plants. This research focuses on identifying the plant diseases and detecting them promptly through the advancements in the field of computer vision. The images obtained from in-field farms are typically with less visual information. However, there is a significant impact on the classification accuracy in the disease diagnosis due to the lack of high-resolution crop images. We propose a novel Reconstructed Disease Aware–Convolutional Neural Network (RDA-CNN), inspired by recent CNN architectures, that integrates image super resolution and classification into a single model for rice plant disease classification. This network takes low-resolution images of rice crops as input and employs the super resolution layers to transform low-resolution images to super-resolution images to recover appearance such as spots, rot, and lesion on different parts of the rice plants. Extensive experimental results indicated that the proposed RDA-CNN method performs well under diverse aspects generating visually pleasing images and outperforms better than other conventional Super Resolution (SR) methods. Furthermore, these super-resolution images are subsequently passed through deep classification layers for disease classification. The results demonstrate that the RDA- CNN significantly boosts the classification performance by nearly 4–6% compared with the baseline architectures.

Combining GEDI and Sentinel-2 for wall-to-wall mapping of tall and short crops

High resolution crop type maps are an important tool for improving food security, and remote sensing is increasingly used to create such maps in regions that possess ground truth labels for model training. However, these labels are absent in many regions, and models trained on optical satellite features often exhibit low performance when transferred across geographies. Here we explore the use of NASA’s global ecosystem dynamics investigation (GEDI) spaceborne lidar instrument, combined with Sentinel-2 optical data, for crop type mapping. Using data from three major cropped regions (in China, France, and the United States) we first demonstrate that GEDI energy profiles can reliably distinguish maize, a crop typically above 2 m in height, from crops like rice and soybean that are shorter. We further show that these GEDI profiles provide much more invariant features across geographies compared to spectral and phenological features detected by passive optical sensors. GEDI is able to distinguish maize from other crops within each region with accuracies higher than 84%, and able to transfer across regions with accuracies higher than 82%, compared to 64% for transfer of optical features. Finally, we show that GEDI profiles can be used to generate training labels for models based on optical imagery from Sentinel-2, thereby enabling the creation of 10 m wall-to-wall maps of tall versus short crops in label-scarce regions. As maize is the second most widely-grown crop in the world and often the only tall crop grown within a landscape, we conclude that GEDI offers great promise for improving global crop type maps.

Integration of Sentinel optical and radar data for mapping smallholder coffee production systems in Vietnam

Perennial commodity crops, such as coffee, often play a large role globally in agricultural markets and supply chains and locally in livelihoods, poverty reduction, and biodiversity. Yet, the production of spatial information on these crops are often overlooked in favor of annual food crops. Remote sensing detection of coffee faces a particular set of challenges due to persistent cloud cover in the tropical “coffee belt,” hilly topography in coffee growing regions, diversity of coffee growing systems, and spectral similarity to other tree crops and agricultural land. Looking at the major coffee growing region in Dak Lak, Vietnam, we integrate multi-temporal 10 m optical Sentinel-2 and Sentinel-1 SAR data in order to map three coffee production systems: i) open-canopy sun coffee, ii) intercropped and other shaded coffee and iii) newly planted or young coffee.Leveraging Google Earth Engine (GEE), we compute five sets of features in order to best enhance separability between coffee and other land cover and within coffee production systems. The features include Sentinel-2 dry and wet season composites, Sentinel-1 texture features, Sentinel-1 spatiotemporal metrics, and topographic features. Using a random forest classification algorithm, we produce a 9-class land cover map including our three coffee production classes and a binary coffee/non-coffee map. The binary map has an overall accuracy of 89% and the three coffee production systems have user accuracies of 65, 56, 71% for sun coffee, intercropped coffee and newly planted coffee, respectively. This is a first effort at large-scale distinction of within-crop production styles and has implications across many applications. The binary coffee map can be used as a high-resolution crop mask, whereas the detailed land cover map can inform monitoring of deforestation dynamics, biodiversity, sustainability certification and implementation of climate adaptation strategies. This work offers a scalable approach to integrating optical and radar Sentinel data for production of spatially explicit agricultural information and contributes particularly to tree crop and agroforestry mapping, which often is overlooked in between agricultural and forestry sciences.

Nano-Enable Materials Promoting Sustainability and Resilience in Modern Agriculture.

Intensive conventional agriculture and climate change have induced severe ecological damages and threatened global food security, claiming a reorientation of agricultural management and public policies towards a more sustainable development model. In this context, nanomaterials promise to support this transition by promoting mitigation, enhancing productivity, and reducing contamination. This review gathers recent research innovations on smart nanoformulations and delivery systems improving crop protection and plant nutrition, nanoremediation strategies for contaminated soils, nanosensors for plant health and food quality and safety monitoring, and nanomaterials as smart food-packaging. It also highlights the impact of engineered nanomaterials on soil microbial communities, and potential environmental risks, along with future research directions. Although large-scale production and in-field testing of nano-agrochemicals are still ongoing, the collected information indicates improvements in uptake, use efficiency, targeted delivery of the active ingredients, and reduction of leaching and pollution. Nanoremediation seems to have a low negative impact on microbial communities while promoting biodiversity. Nanosensors enable high-resolution crop monitoring and sustainable management of the resources, while nano-packaging confers catalytic, antimicrobial, and barrier properties, preserving food safety and preventing food waste. Though, the application of nanomaterials to the agri-food sector requires a specific risk assessment supporting proper regulations and public acceptance.

CubeSats deliver new insights into agricultural water use at daily and 3\xa0m resolutions

Earth observation has traditionally required a compromise in data collection. That is, one could sense the Earth with high spatial resolution occasionally; or with lower spatial fidelity regularly. For many applications, both frequency and detail are required. Precision agriculture is one such example, with sub-10 m spatial, and daily or sub-daily retrieval representing a key goal. Towards this objective, we produced the first cloud-free 3 m daily evaporation product ever retrieved from space, leveraging recently launched nano-satellite constellations to showcase this emerging potential. Focusing on three agricultural fields located in Nebraska, USA, high-resolution crop water use estimates are delivered via CubeSat-based evaporation modeling. Results indicate good model agreement (r2 of 0.86–0.89; mean absolute error between 0.06 and 0.08 mm/h) when evaluated against corrected flux tower data. CubeSat technologies are revolutionizing Earth observation, delivering novel insights and new agricultural informatics that will enhance food and water security efforts, and enable rapid and informed in-field decision making.

Monthly composites from Sentinel-1 and Sentinel-2 images for regional major crop mapping with Google Earth Engine

Rapid and accurate access to large-scale, high-resolution crop-type distribution maps is important for agricultural management and sustainable agricultural development. Due to the limitations of remote sensing image quality and data processing capabilities, large-scale crop classification is still challenging. This study aimed to map the distribution of crops in Heilongjiang Province using Google Earth Engine (GEE) and Sentinel-1 and Sentinel-2 images. We obtained Sentinel-1 and Sentinel-2 images from all the covered study areas in the critical period for crop growth in 2018 (May to September), combined monthly composite images of reflectance bands, vegetation indices and polarization bands as input features, and then performed crop classification using a Random Forest (RF) classifier. The results show that the Sentinel-1 and Sentinel-2 monthly composite images combined with the RF classifier can accurately generate the crop distribution map of the study area, and the overall accuracy (OA) reached 89.75%. Through experiments, we also found that the classification performance using time-series images is significantly better than that using single-period images. Compared with the use of traditional bands only (i.e., the visible and near-infrared bands), the addition of shortwave infrared bands can improve the accuracy of crop classification most significantly, followed by the addition of red-edge bands. Adding common vegetation indices and Sentinel-1 data to the crop classification improved the overall classification accuracy and the OA by 0.2 and 0.6%, respectively, compared to using only the Sentinel-2 reflectance bands. The analysis of timeliness revealed that when the July image is available, the increase in the accuracy of crop classification is the highest. When the Sentinel-1 and Sentinel-2 images for May, June, and July are available, an OA greater than 80% can be achieved. The results of this study are applicable to large-scale, high-resolution crop classification and provide key technologies for remote sensing-based crop classification in small-scale agricultural areas.

High-Resolution Rice Mapping Based on SNIC Segmentation and Multi-Source Remote Sensing Images

High-resolution crop mapping is of great significance in agricultural monitoring, precision agriculture, and providing critical information for crop yield or disaster monitoring. Meanwhile, medium resolution time-series optical and synthetic aperture radar (SAR) images can provide useful phenological information. Combining high-resolution satellite data and medium resolution time-series images provides a great opportunity for fine crop mapping. Simple Non-Iterative Clustering (SNIC) is a state-of-the-art image segmentation algorithm that shows the advantages of efficiency and high accuracy. However, the application of SNIC in crop mapping based on the combination of high-resolution and medium-resolution images is unknown. Besides, there is still little research on the influence of the superpixel size (one of the key user-defined parameters of the SNIC method) on classification accuracy. In this study, we employed a 2 m high-resolution GF-1 pan-sharpened image and 10 m medium resolution time-series Sentinel-1 C-band Synthetic Aperture Radar Instrument (C-SAR) and Sentinel-2 Multispectral Instrument (MSI) images to carry out rice mapping based on the SNIC method. The results show that with the increase of the superpixel size, the classification accuracy increased at first and then decreased rapidly after reaching the summit when the superpixel size is 27. The classification accuracy of the combined use of optical and SAR data is higher than that using only Sentinel-2 MSI or Sentinel-1 C-SAR vertical transmitted and vertical received (VV) or vertical transmitted and horizontal received (VH) data, with overall accuracies of 0.8335, 0.8282, 0.7862, and 0.7886, respectively. Meanwhile, the results also indicate that classification based on superpixels obtained by SNIC significantly outperforms classification based on original pixels. The overall accuracy, producer accuracy, and user accuracy of SNIC superpixel-based classification increased by 9.14%, 17.16%, 27.35% and 1.36%, respectively, when compared with the pixel-based classification, based on the combination of optical and SAR data (using the random forest as the classifier). The results show that SNIC superpixel segmentation is a feasible method for high-resolution crop mapping based on multi-source remote sensing data. The automatic selection of the optimal superpixel size of SNIC will be focused on in future research.

Large-Scale and High-Resolution Crop Mapping in China Using Sentinel-2 Satellite Imagery

Large-scale, high-resolution mapping of crop patterns is useful for the assessment of food security and agricultural sustainability but is still limited. This study attempted to establish remote sensing-based crop classification models for specific cropping systems using the decision trees method and monitored the distribution of the major crop species using Sentinel-2 satellites (10 m) in 2017. The results showed that the cropping areas of maize, rice, and soybean on the Northeast China Plain were approximately 12.1, 6.2, and 7.4 million ha, respectively. The cropping areas of winter wheat and summer maize on the North China Plain were 13.4 and 16.9 million ha, respectively. The cropping areas of wheat, rice, and rape on the middle-lower Yangtze River plain were 2.2, 6.4 and 1.3 million ha, respectively. Estimated images agreed well with field survey data (average overall accuracy = 94%) and the national agricultural census data (R2 = 0.78). This indicated the applicability of the Sentinel-2 satellite data for large-scale, high-resolution crop mapping in China. We intend to update the crop mapping datasets annually and hope to guide the adjustment and optimization of the national agricultural structure.

Evaluation of High-Resolution Crop Model Meteorological Forcing Datasets at Regional Scale: Air Temperature and Precipitation over Major Land Areas of China

Air temperature and precipitation are two important meteorological factors affecting the earth’s energy exchange and hydrological process. High quality temperature and precipitation forcing datasets are of great significance to agro-meteorology and disaster monitoring. In this study, the accuracy of air temperature and precipitation of the fifth generation of atmospheric reanalysis produced by the European Centre for Medium-Range Weather Forecasts (ERA5) and High-Resolution China Meteorological Administration Land Data Assimilation System (HRCLDAS) datasets are compared and evaluated from multiple spatial–temporal perspectives based on the ground meteorological station observations over major land areas of China in 2018. Concurrently, the applicability to the monitoring of high temperatures and rainstorms is also distinguished. The results show that (1) although both forcing datasets can capture the broad features of spatial distribution and seasonal variation in air temperature and precipitation, HRCLDAS shows more detailed features, especially in areas with complex underlying surfaces; (2) compared with the ground observations, it can be found that the air temperature and precipitation of HRCLDAS perform better than ERA5. The root-mean-square error (RMSE) of mean air temperature are 1.3 °C for HRCLDAS and 2.3 °C for ERA5, and the RMSE of precipitation are 2.4 mm for HRCLDAS and 5.4 mm for ERA5; (3) in the monitoring of important weather processes, the two forcing datasets can well reproduce the high temperature, rainstorm and heavy rainstorm events from June to August in 2018. HRCLDAS is more accurate in the area and magnitude of high temperature and rainstorm due to its high spatial and temporal resolution. The evaluation results can help researchers to understand the superiority and drawbacks of these two forcing datasets and select datasets reasonably in the study of climate change, agro-meteorological modeling, extreme weather research, hydrological processes and sustainable development.

Mapping Crop Types in Southeast India with Smartphone Crowdsourcing and Deep Learning

High resolution satellite imagery and modern machine learning methods hold the potential to fill existing data gaps in where crops are grown around the world at a sub-field level. However, high resolution crop type maps have remained challenging to create in developing regions due to a lack of ground truth labels for model development. In this work, we explore the use of crowdsourced data, Sentinel-2 and DigitalGlobe imagery, and convolutional neural networks (CNNs) for crop type mapping in India. Plantix, a free app that uses image recognition to help farmers diagnose crop diseases, logged 9 million geolocated photos from 2017–2019 in India, 2 million of which are in the states of Andhra Pradesh and Telangana in India. Crop type labels based on farmer-submitted images were added by domain experts and deep CNNs. The resulting dataset of crop type at coordinates is high in volume, but also high in noise due to location inaccuracies, submissions from out-of-field, and labeling errors. We employed a number of steps to clean the dataset, which included training a CNN on very high resolution DigitalGlobe imagery to filter for points that are within a crop field. With this cleaned dataset, we extracted Sentinel time series at each point and trained another CNN to predict the crop type at each pixel. When evaluated on the highest quality subset of crowdsourced data, the CNN distinguishes rice, cotton, and “other” crops with 74% accuracy in a 3-way classification and outperforms a random forest trained on harmonic regression features. Furthermore, model performance remains stable when low quality points are introduced into the training set. Our results illustrate the potential of non-traditional, high-volume/high-noise datasets for crop type mapping, some improvements that neural networks can achieve over random forests, and the robustness of such methods against moderate levels of training set noise. Lastly, we caution that obstacles like the lack of good Sentinel-2 cloud mask, imperfect mobile device location accuracy, and preservation of privacy while improving data access will need to be addressed before crowdsourcing can widely and reliably be used to map crops in smallholder systems.

Less Is More: Lower Sowing Rate of Irrigated Tef (Eragrostis tef) Alters Plant Morphology and Reduces Lodging

Tef (Eragrostis tef (Zucc.) Trotter) is a panicle-bearing cereal crop plant, originating from and grown mainly in Ethiopia. Tef yields highly nutritious gluten-free grain as well as high-quality forage, therefore, interest is rising regarding tef cultivation for grain and forage outside Ethiopia. Lodging is a major factor limiting tef quality and yield, with losses estimated at 30%–35% and presumably higher under mechanical harvest. Studies in other cereal crops suggested that lowering plant density would lead to sturdier plants less prone to lodging. In this work, we reported on the effects of sowing rate on lodging, lodging-related traits, and productivity of tef under irrigated conditions. Four tef genotypes were grown under irrigation across two years at three sowing rates: low (3 kg/ha), medium (6 kg/ha), and high (common, 9 kg/ha). Grain yield and biomass did not differ significantly among sowing rates. The visually assessed lodging index (LI) increased as the season progressed, with the lowest values recorded under low sowing density. A significant difference in LI values among the tested genotypes suggested potential for crop improvement. Aerial RGB images of the field taken by an unmanned aerial vehicle twice during the second season produced a high-resolution crop surface model, which was used to assess lodging. Aerial-based LI values were significantly correlated with the ground-based ones and exhibited better capacity to identify minor differences in lodging. Among the morphological traits assessed, crown diameter, crown root number, and crown root diameter were significantly affected by sowing rate and genotype and were correlated with LI values. In summary, this study demonstrated for the first time the feasibility of tef production under irrigated Mediterranean conditions and the potential of a reduced sowing rate as a remedy for lodging.

ChinaCropPhen1km: a high-resolution crop phenological dataset for three staple crops in China during 2000–2015 based on leaf area index (LAI) products

Abstract. Crop phenology provides essential information for monitoring and modeling land surface phenology dynamics and crop management and production. Most previous studies mainly investigated crop phenology at the site scale; however, monitoring and modeling land surface phenology dynamics at a large scale need high-resolution spatially explicit information on crop phenology dynamics. In this study, we produced a 1 km grid crop phenological dataset for three main crops from 2000 to 2015 based on Global Land Surface Satellite (GLASS) leaf area index (LAI) products, called ChinaCropPhen1km. First, we compared three common smoothing methods and chose the most suitable one for different crops and regions. Then, we developed an optimal filter-based phenology detection (OFP) approach which combined both the inflection- and threshold-based methods and detected the key phenological stages of three staple crops at 1 km spatial resolution across China. Finally, we established a high-resolution gridded-phenology product for three staple crops in China during 2000–2015. Compared with the intensive phenological observations from the agricultural meteorological stations (AMSs) of the China Meteorological Administration (CMA), the dataset had high accuracy, with errors of the retrieved phenological date being less than 10 d, and represented the spatiotemporal patterns of the observed phenological dynamics at the site scale fairly well. The well-validated dataset can be applied for many purposes, including improving agricultural-system or earth-system modeling over a large area (DOI of the referenced dataset: https://doi.org/10.6084/m9.figshare.8313530; Luo et al., 2019).

Effect of grid resolution and spatial representation of NH3 emissions from fertilizer application on predictions of NH3 and PM2.5 concentrations in the United States Corn Belt

Ammonia (NH3) emissions from fertilizer application is a highly uncertain input to chemical transport models (CTMs). Reducing such uncertainty is important for improving predictions of ambient NH3 and PM2.5 concentrations, for regulatory and policy purposes and for exploring linkages of air pollution to human health and ecosystem services. Here, we implement a spatially and temporally resolved inventory of NH3 emissions from fertilizers, based on high-resolution crop maps, crop nitrogen demand and a process model, as input to the Comprehensive Air Quality Model with Extensions (CAMx). We also examine sensitivity to grid resolution, by developing inputs at 12 km × 12 km and 4 km × 4 km, for the Corn Belt region in the Midwest United States, where NH3 emissions from chemical fertilizer application contributes to approximately 50% of anthropogenic emissions. Resulting predictions of ambient NH3 and PM2.5 concentrations were compared to predictions developed using the baseline 2011 National Emissions Inventory, and evaluated for closure with ground observations for May 2011. While CAMx consistently underpredicted NH3 concentrations for all scenarios, the new emissions inventory reduced bias in ambient NH3 concentration by 33% at 4 km × 4 km, and modestly improved predictions of PM2.5, at 12 km × 12 km (correlation coefficients r = 0.57 for PM2.5, 0.88 for PM-NH4, 0.71 for PM-SO4, 0.52 for PM-NO3). Our findings indicate that in spite of controlling for total magnitude of emissions and for meteorology, representation of NH3 emissions and choice of grid resolution within CAMx impacts the total magnitude and spatial patterns of predicted ambient NH3 and PM2.5 concentrations. This further underlines the need for improvements in NH3 emission inventories. For future research, our results also point to the need for better understanding of the effect of model spatial resolution with regard to both meteorology and chemistry in CTMs, as grid size becomes finer.

High resolution crop intensity mapping using harmonized Landsat-8 and Sentinel-2 data

An increase in crop intensity could improve crop yield but may also lead to a series of environmental problems, such as depletion of ground water and increased soil salinity. The generation of high resolution (30 m) crop intensity maps is an important method used to monitor these changes, but this is challenging because the temporal resolution of the 30-m image time series is low due to the long satellite revisit period and high cloud coverage. The recently launched Sentinel-2 satellite could provide optical images at 10–60 m resolution and thus improve the temporal resolution of the 30-m image time series. This study used harmonized Landsat Sentinel-2 (HLS) data to identify crop intensity. The sixth polynomial function was used to fit the normalized difference vegetation index (NDVI) and enhanced vegetation index (EVI) curves. Then, 15-day NDVI and EVI time series were then generated from the fitted curves and used to generate the extent of croplands. Lastly, the first derivative of the fitted VI curves were used to calculate the VI peaks; spurious peaks were removed using artificially defined thresholds and crop intensity was generated by counting the number of remaining VI peaks. The proposed methods were tested in four study regions, with results showing that 15-day time series generated from the fitted curves could accurately identify cropland extent. Overall accuracy of cropland identification was higher than 95%. In addition, both the harmonized NDVI and EVI time series identified crop intensity accurately as the overall accuracies, producer's accuracies and user's accuracies of non-cropland, single crop cycle and double crop cycle were higher than 85%. NDVI outperformed EVI as identifying double crop cycle fields more accurately.

Detecting Winter Wheat Irrigation Signals Using SMAP Gridded Soil Moisture Data

The southern part of the Hebei Province is one of China’s major crop-producing regions. Due to the continuous decline in groundwater level, agricultural water use is facing significant challenges. Precision agricultural irrigation management is undoubtedly an effective way to solve this problem. Based on multisource data (time series soil moisture active passive (SMAP) data, Moderate Resolution Imaging Spectroradiometer (MODIS) normalized difference vegetation index (NDVI) and evapotranspiration (ET), and meteorological station precipitation), the irrigation signal (frequency, timing and area) is detected in the southern part of the Hebei Province. The SMAP data was processed by the 5-point moving average method to reduce the error caused by the uncertainty of the microwave data derived SM. Irrigation signals can be detected by removing the precipitation effect and setting the SM change threshold. Based on the validation results, the overall accuracy of the irrigation signal detection is 77.08%. Simultaneously, considering the spatial resolution limitation of SMAP pixels, the SMAP irrigation area was downscaled using the winter wheat area extracted from MODIS NDVI. The analytical results of 55 winter wheat samples (5 samples in a group) showed that winter wheat covered by one SMAP pixel had an 82.72% growth consistency in surface water irrigation period, which can indicate a downscaling effectiveness. According to the above statistical analysis, this paper considers that although the spatial resolution of SMAP data is insufficient, it can reflect the change of SM more sensitively. In areas where the crop pattern is relatively uniform, the introduction of high-resolution crop pattern distribution can be used not only to detect irrigation signals but also to validate the effectiveness of irrigation signal detection by analyzing crop growth consistency. Therefore, the downscaling results can indicate the true winter wheat irrigation timing, area and frequency in the study area.

Considerations on spatial crop load mapping

Crop load, the ratio of vine size to mass of fruit harvested, is fundamental to viticulture. Measuring vine size and crop yield, the components of crop load, has historically been a labour intensive exercise that has limited the use of crop load information to improve management in vineyards. Recent advances in assessing vine vigour, size and yield using geo‐referenced sensors are starting to make high resolution crop load mapping possible. In this paper, the concept of crop load is revisited with an emphasis on how vine size and yield can be mapped in vineyards. Existing literature is reviewed on how vine size and yield vary spatially and temporally within vineyard blocks and the inference this has on the spatio‐temporal variability of crop load. An example of crop load mapping using sensor technology is presented to illustrate recent advances in sensor technology in viticulture. Finally, some emerging technology and knowledge gaps for implementing spatial crop load information into vineyard management are discussed.

Low altitude remote sensing technologies for crop stress monitoring: a case study on spatial and temporal monitoring of irrigated pinto bean

Site-specific crop management is a promising approach to maximize crop yield with optimal use of rapidly depleting natural resources. Availability of high resolution crop data at critical growth stages is a key for real-time data-driven decisions during the production season. The goal of this study was to evaluate the possibility of using small unmanned aerial system (UAS)-based remote sensing technologies to monitor the crop stress of irrigated pinto beans (Phaseolus vulgaris L.) with varied irrigation and tillage treatments. A small UAS with onboard multispectral and infrared thermal imaging sensors was used to collect data from bean field plots on three growth stages in 2015 and 2016, respectively. Indicators including green normalized vegetation index (GNDVI), canopy cover (CC, ratio of ground covered by crop canopy to the total plot area) and canopy temperature (CT, °C) of crops were extracted from imaging data and correlated with ground-reference crop yield and leaf area index (LAI) estimated with a handheld ceptometer. Results show that GNDVI, CC and CT were able to differentiate crops with full and deficit irrigation treatments at each of the three growth stages in both years. Developed indicators were strongly correlated with to the crop yield with Pearson correlation coefficients (r) of approximate 0.71 and 0.72 for GNDVI and CC, respectively, in the early growth stage (54 days after planting) in both years. Canopy temperature showed even stronger correlation (r > 0.8) with yield at early growth stage. Performance of small UAS-based imagery-based indicators in crop stress monitoring and crop yield estimation was better than or comparable to that of the ground-based LAI estimates, indicating the potential of such remote sensing tool in rapid crop stress monitoring and management.

An operational approach to high resolution agro-ecological zoning in West-Africa.

The objective of this work is to develop a simple methodology for high resolution crop suitability analysis under current and future climate, easily applicable and useful in Least Developed Countries. The approach addresses both regional planning in the context of climate change projections and pre-emptive short-term rural extension interventions based on same-year agricultural season forecasts, while implemented with off-the-shelf resources. The developed tools are applied operationally in a case-study developed in three regions of Guinea-Bissau and the obtained results, as well as the advantages and limitations of methods applied, are discussed. In this paper we show how a simple approach can easily generate information on climate vulnerability and how it can be operationally used in rural extension services.