High-resolution Array Research Articles

Quasi-single-crystal Tin Halide Perovskite Films with High Structural Integrity for Near-infrared Imaging Array enabling Hidden Object Recognition.

Near-infrared (NIR) image sensors based on solution-processed thin film are gaining prominence in various applications, including security detection, remote sensing, medical imaging, and environmental monitoring, owing to superior penetration capabilities of NIR light. However, the reported perovskite image sensors suffer from limited resolution and performance due to poor structural integrity, bioincompatibility, and constrained response wavelength range from lead-based perovskite materials employed. In this study, we present non-toxic quasi-single-crystal (QSC) CH(NH2)2SnI3 (FASnI3) perovskite films, prepared via a simple spin-coating technique, that demonstrate high structural integrity and effective NIR response. Through a series of in situ characterizations, we reveal that the orderly growth mode of QSC-FASnI3 perovskite films enables a more oriented crystal growth with reduced trap and grain boundaries. Consequently, self-powered NIR photodetector based on QSC-FASnI3 films exhibited large detectivity over 1013 Jones in the NIR range (780-890 nm). Ultimately, due to the high structural integrity, the high-resolution 64 × 64 (4096) pixels NIR imaging array, exhibiting reduced photo and dark response non-uniformity value, was fabricated on the thin-film transistors (TFT) backplanes, enabling ultraweak NIR light (63 nW cm-2) real-time imaging, fingerprint imaging, and hidden object recognition. This work pioneers the application of lead-free perovskite for high-resolution NIR imaging arrays.

Online Quality Control of Powder Bed Fusion with High-Resolution Eddy Current Testing Inductive Sensor Arrays

Online Quality Control of Powder Bed Fusion with High-Resolution Eddy Current Testing Inductive Sensor Arrays

Assessment of Gastric Remnant Activity, Symptoms, and Quality of Life Following Gastric Bypass.

While most gastric bypass patients recover well, some experience long-term complications, including nausea, abdominal pain, food intolerance, and dumping. This study aimed to evaluate symptoms and quality of life (QoL) in association with the residual activity of the remnant stomach. Patients undergoing gastric bypass and conversion-to-bypass were recruited. The Gastric Alimetry® System (Auckland, NZ) was employed, comprising a high-resolution electrode array, wearable reader, and validated symptom logging app. The protocol comprised 30-min fasting baseline, a 218-kCal meal stimulus, and 4-h of post-prandial recordings. Symptoms and QoL were evaluated using validated questionnaires. Remnant gastric electrophysiology evaluation included frequency, BMI-adjusted amplitude, and Gastric Alimetry Rhythm Index (GA-RI, reflecting pacemaker stability), with comparison to validated reference intervals and matched controls. Thirty-eight participants were recruited with mean time from bypass 46.8 ± 28.6months. One-third of patients showed moderate to severe post-prandial symptoms, with patients' median PAGI-SYM 28 ± 19 vs controls 9 ± 17 (p < 0.01); PAGI-QOL 37 ± 31 vs 135 ± 22 (p < 0.0001). Remnant gastric function was markedly degraded shown by undetectable frequencies in 84% (vs 0% in controls) and low GA-RI (0.18 ± 0.08 vs 0.51 ± 0.22 in controls; p < 0.0001; reference range > 0.25). Impaired GA-RI and amplitude were correlated with worse PAGI-SYM and PAGI-QOL scores. One-third of post-bypass patients suffered significant upper GI symptoms with reduced QoL. The bypassed remnant stomach shows highly deranged electrophysiology in-situ, reflecting disuse degeneration. These derangements correlated with QoL; however, causality is not implied by the present study.

Application of Instance Segmentation to Identifying Insect Concentrations in Data from an Entomological Radar

Entomological radar is one of the most effective tools for monitoring insect migration, capable of detecting migratory insects concentrated in layers and facilitating the analysis of insect migration behavior. However, traditional entomological radar, with its low resolution, can only provide a rough observation of layer concentrations. The advent of High-Resolution Phased Array Radar (HPAR) has transformed this situation. With its high range resolution and high data update rate, HPAR can generate detailed concentration spatiotemporal distribution heatmaps. This technology facilitates the detection of changes in insect concentrations across different time periods and altitudes, thereby enabling the observation of large-scale take-off, landing, and layering phenomena. However, the lack of effective techniques for extracting insect concentration data of different phenomena from these heatmaps significantly limits detailed analyses of insect migration patterns. This paper is the first to apply instance segmentation technology to the extraction of insect data, proposing a method for segmenting and extracting insect concentration data from spatiotemporal distribution heatmaps at different phenomena. To address the characteristics of concentrations in spatiotemporal distributions, we developed the Heatmap Feature Fusion Network (HFF-Net). In HFF-Net, we incorporate the Global Context (GC) module to enhance feature extraction of concentration distributions, utilize the Atrous Spatial Pyramid Pooling with Depthwise Separable Convolution (SASPP) module to extend the receptive field for understanding various spatiotemporal distributions of concentrations, and refine segmentation masks with the Deformable Convolution Mask Fusion (DCMF) module to enhance segmentation detail. Experimental results show that our proposed network can effectively segment concentrations of different phenomena from heatmaps, providing technical support for detailed and systematic studies of insect migration behavior.

Prevalence of Compact Nuclear Radio Emission in Post-merger Galaxies and Its Origin

Post-merger galaxies are unique laboratories to study the triggering and interplay of star formation and active galactic nucleus (AGN) activity. Combining new, high-resolution Jansky Very Large Array (VLA) observations with archival radio surveys, we have examined the radio properties of 28 spheroidal post-merger galaxies. We detect 18 radio sources in our post-merger sample and find a general lack of extended emission at (sub)kiloparsec scales, indicating the prevalence of compact, nuclear radio emission in these post-merger galaxies, with the majority (16/18; 89%) characterized as low luminosity. Using multiwavelength data, we determine the origin of the radio emission, discovering 15 new radio AGNs and three radio sources likely associated with star-forming (SF) processes. Among the radio AGNs, almost all are low luminosity (13/15; 87%), inconsistent with a relativistic jet origin. We discover a new dual AGN (DAGN) candidate, J1511+0417, and investigate the radio properties of the DAGN candidate J0843+3549. Five of these radio AGNs are hosted by a SF or SF-AGN composite emission-line galaxy, suggesting that radio AGN activity may be present during periods of SF activity in post-mergers. The low-power jets and compact morphologies of these radio AGNs also point to a scenario in which AGN feedback may be efficient in this sample of post-mergers. Lastly, we present simulated, multifrequency observations of the 15 radio AGNs with the Very Long Baseline Array and the very-long-baseline interferometry capabilities of the Next-Generation VLA to assess the feasibility of these instruments in searches for supermassive black hole binaries.

3-D High-Resolution Imaging and Array Calibration of Ground-Based Millimeter-Wave MIMO Radar

3-D High-Resolution Imaging and Array Calibration of Ground-Based Millimeter-Wave MIMO Radar

Electromechanical Coupling and Anatomy of the In-Vivo Gastroduodenal Junction.

Few biomarkers support diagnosis and treatment of disorders of gut-brain interaction (DGBI), although gastroduodenal junction (GDJ) electromechanical coupling is a target for novel interventions. Rhythmic 'slow waves', generated by interstitial cells of Cajal (ICC), and myogenic 'spikes' are bioelectrical mechanisms underpinning motility. In this study, simultaneous in-vivo high-resolution electrophysiological and impedance planimetry measurements were paired with immunohistochemistry to elucidate GDJ electromechanical coupling. Following ethical approval, the GDJ of anaesthetized pigs (N=12) was exposed. Anatomically-specific, high-resolution electrode arrays (256 electrodes) were applied to the serosa. EndoFLIP catheters (16 electrodes; Medtronic, MN, USA) were positioned luminally to estimate diameter. Post-mortem tissue samples were stained with Masson's trichrome and Ano1 to quantify musculature and ICC. Electrical mapping captured slow-waves (N=512) and spikes (N=1071). Contractions paralleled electrical patterns. Localized slow waves and spikes preceded rhythmic contractions of the antrum, and non-rhythmic contractions of the duodenum. Slow-wave and spike amplitudes were correlated in the antrum (r=0.74, p<0.001) and duodenum (r=0.42, p<0.001). Slow-wave and contractile amplitudes were correlated in the antrum (r=0.48, p<0.001) and duodenum (r=0.35, p<0.001). Distinct longitudinal and circular muscle layers of the antrum and duodenum had a total thickness of (2.8 ± 0.9) mm and (0.4 ± 0.1) mm, respectively. At the pylorus, muscle layers merged and thickened to (3.5 ± 1.6) mm. Pyloric myenteric ICC covered less area (1.5 ± 1.1 %) compared to the antrum (4.2 ± 3.0 %) and duodenum (5.3 ± 2.8 %). Further characterization of electromechanical coupling and ICC biopsies may generate DGBI biomarkers.

Pinch-off dynamics of an electrohydrodynamic tip streaming jet transforming into the microdroplet

The drop-on-demand electrohydrodynamic (EHD) printing is promising for manufacturing high-resolution dot arrays. Such dot fabrication is commonly achieved through two printing modes (jet/droplet mode), i.e., continuous jet directly flying to or broken jet induced droplet depositing in the substrate. The droplet mode commonly has a higher printing frequency than the jet mode, indicating the droplet mode's advantage in drop-on-demand EHD printing. However, most research on EHD printing focuses on the jet mode, which causes the mechanism of droplet production through jet pinch-off remains unclear. This study employs an arbitrary Lagrangian–Eulerian method capable of getting a sharp interface to reveal the pinch-off mechanism. First, the development of a tip streaming from a meniscus to the pinch-off is analyzed. It is found that the high pressure at the neck is the main reason for the pinch-off of the jet into the droplet. Second, the EHD phase diagram in the parameter space of We–Cae is plotted, where We is the Weber number and Cae is the electric capillary number. Finally, the important influences of the charge relaxation on the EHD tip streaming jet's breakup behavior and the generated droplets' properties are revealed. Evolutions of the droplet's properties, including radius, velocity, and charge, with varying charge relaxation parameters are offered. These properties of the droplet show their relationships with extreme values as a function of the charge relaxation parameter. This work can serve as the theoretical basis for tuning the EHD printing manufacturing performance.

GW-MUSIC focusing algorithm with high accuracy for composite damage diagnosis

The Guided Wave (GW)-based Multiple Signal Classification (MUSIC) method for damage imaging in composite structures offers high-resolution and flexible sensor array placement, demonstrating considerable potential for precise damage localization. However, the application to real aircraft composite structures, characterized by complex structural features, presents substantial challenges. These include complex boundary reflections, pronounced anisotropy, and diminished scattered signals from damage sites. This paper presents a novel single-peak anisotropy-compensated MUSIC method for damage imaging of complex composites. This method, designed for improved localization accuracy, combines a self-excited calibration strategy to mitigate anisotropy with single wave peak focusing to amplify signals and reduce boundary reflections. Experimental validation on a complex composite wing structure demonstrated significant enhancements in localization precision, affirming the method's efficacy.

High-energy pacing inhibits slow-wave dysrhythmias in the small intestine.

The motility of the gastrointestinal tract is coordinated in part by rhythmic slow waves, and disrupted slow-wave patterns are linked to functional motility disorders. At present, there are no treatment strategies that primarily target slow-wave activity. This study assessed the use of pacing to suppress glucagon-induced slow-wave dysrhythmias in the small intestine. Slow waves in the jejunum were mapped in vivo using a high-resolution surface-contact electrode array in pigs (n = 7). Glucagon was intravenously administered to induce hyperglycemia. Slow-wave propagation patterns were categorized into antegrade, retrograde, collision, pacemaker, and uncoupled activity. Slow-wave characteristics such as period, amplitude, and speed were also quantified. Postglucagon infusion, pacing was applied at 4 mA and 8 mA and the resulting slow waves were quantified spatiotemporally. Antegrade propagation was dominant throughout all stages with a prevalence of 55 ± 38% at baseline. However, glucagon infusion resulted in a substantial and significant increase in uncoupled slow waves from 10 ± 8% to 30 ± 12% (P = 0.004) without significantly altering the prevalence of other slow-wave patterns. Slow-wave frequency, amplitude, and speed remained unchanged. Pacing, particularly at 8 mA, significantly suppressed dysrhythmic slow-wave patterns and achieved more effective spatial entrainment (85%) compared with 4 mA (46%, P = 0.039). This study defined the effect of glucagon on jejunal slow waves and identified uncoupling as a key dysrhythmia signature. Pacing effectively entrained rhythmic activity and suppressed dysrhythmias, highlighting the potential of pacing for gastrointestinal disorders associated with slow-wave abnormalities.NEW & NOTEWORTHY Glucagon was infused in pigs to induce hyperglycemia and the resulting slow-wave response in the intact jejunum was defined in high resolution for the first time. Subsequently, with pacing, the glucagon-induced dysrhythmias were suppressed and spatially entrained for the first time with a success rate of 85%. The ability to suppress slow-wave dysrhythmias through pacing is promising in treating motility disorders that are associated with intestinal dysrhythmias.

Direct Printing of High-Resolution Metallic Three-Dimensional Microneedle Arrays Via Electrohydrodynamic Jet Printing

Abstract Three-dimensional (3D) microneedle arrays (MAs) have shown remarkable performances for a wide range of biomedical applications. Achieving advanced customizable 3D MAs for personalized research and treatment remain a formidable challenge. In this paper, we have developed a high-resolution electrohydrodynamic (EHD) 3D printing process for fabricating customizable 3D MAs with economical and biocompatible molten alloy. The critical printing parameters (i.e., voltage and pressure) on the printing process for both two-dimensional (2D) and 3D features are characterized, and an optimal set of printing parameters was obtained for printing 3D MAs. We have also studied the effect of the tip-nozzle separation speed on the final tip dimension, which will directly influence MAs' insertion performance and functions. With the optimal process parameters, we successfully EHD printed customizable 3D MAs with varying spacing distances and shank heights. A 3 × 3 customized 3D MAs configuration with various heights ranging from 0.8 mm to 1 mm and a spacing distance as small as 350 μm were successfully fabricated, in which the diameter of each individual microneedle was as small as 100 μm. A series of tests were conducted to evaluate the printed 3D MAs. The experimental results demonstrated that the printed 3D MAs exhibit good mechanical strength for implanting and good electrical properties for electrophysiological sensing and stimulation. All results show the potential applications of the EHD printing technique in fabricating cost-effective, customizable, high-performance MAs for biomedical applications.

Genomic instability in advanced non-small cell lung cancer (NSCLC) treated with maintenance durvalumab in the UNICANCER SAFIR02-Lung/ IFCT1301 trial.

2632 Background: Genomic instability is a hallmark of cancer that has been associated to immune evasion, cancer progression and multidrug resistance. In SAFIR02-Lung, advanced NSCLC pts were enrolled to receive a platinum-based chemotherapy. After 4 cycles, pts with no targetable alterations were oriented to the immunotherapy sub-study, and if stable or in response, were randomized between maintenance durvalumab or Standard of Care (SoC) (PMID 35802649). Durvalumab prolonged survival only in the PD-L1 ≥ 1% subgroup. In this study we investigated a genomic instability score based on somatic copy number alterations as determined by Comparative Genomic Hybridization (CGH) array as a biomarker for maintenance immunotherapy. Methods: SAFIR02-Lung (NCT02117167) is a multicentric, randomized phase 2 clinical trial. Tissue samples were obtained before induction chemotherapy. Extracted DNA from fresh frozen tumor was analyzed using high-resolution Affymetrix Cytoscan arrays, DNA from FFPE samples was analyzed using the Affymetrix Oncoscan CNV platform. The absolute copy-number (ACN) profile was generated by ASCAT v3.1 through EaCoN v0.3.6 ( https://github.com/gustaveroussy/EaCoN , PMID 36669143 ) on R v4.1.1 and then the genomic instability score was estimated as the sum of the segment length multiplied by the absolute difference between segment copy number and the ASCAT estimated sample ploidy. This sum is reported to the reference genome length. Progression Free Survival (PFS) was the primary endpoint, defined as the time from randomization until the date of objective radiological disease progression, clinical progression or death. The secondary endpoint was Overall Survival (OS). Results: CGH array data were available for 79 patients out of 183, 56 randomized to durvalumab and 23 to SoC. 47 were men, 72 had non-squamous histology and 12 had brain and 10 had liver metastasis. We divided patients in tertiles according to instability (INS) score. No correlation was seen between INS score and PD-L1 positivity (p = 0.5), or liver and brain metastasis. Pts with high INS had lower median PFS of 2.5 months (m) (95% CI 1.4 – 5.2) vs 4.3m (95% CI 2.6 – 13.7) for those with intermediate INS and 6.1m for those with low INS (95% CI 1.9 – 21.2), p 0.012. Similarly, low INS patients had longer OS of 29.6 m (95% CI 15.4 – NR) vs 17.9m for intermediate INS (95% CI 10 – NA) and 12.1m for high INS (95% CI 10.2 – 19.5), p = 0.039. No difference was seen in the control group (p=0.25 for PFS and p=0.4 for OS). A multivariable model showed that high INS was independently associated worse PFS (HR 2.60, 95% CI 1.36 - 4.98, p 0.004) and OS (HR 2.90, 95% CI 1.33 - 6.35, p 0.008). Conclusions: Genomic instability score based on CGH array-based copy number alterations profile is associated with worse PFS and OS in patients under response to chemotherapy who received durvalumab maintenance. Clinical trial information: NCT02117167 .

Observation of the spin Hall effect of light by a single-photon detector.

We use a single-photon detector to detect the spin Hall effect of light (SHEL) of a quasi-single-photon beam obtained in this Letter. The physics of the spin Hall effect and its quantum weak measurement method with a dimensionless pointer are elucidated through particle number representation. Our weak measurement scheme obviates the necessity of high-resolution single-photon array detectors. Consequently, we have successfully observed the spin Hall effect within a 20 ns temporal window using a position-resolution-independent single-photon detector with remarkably low-noise levels. The weak measurement of the dimensionless pointer presented in this Letter boosts both the detection accuracy and the response speed of the photonics spin Hall effect, thereby contributing significantly to fundamental theoretical research in spin photonics and precise measurements of physical property parameters.

Genome integrity as a potential index of longevity in Ashkenazi Centenarian’s families

The aging process, or senescence, is characterized by age-specific decline in physical and physiological function, and increased frailty and genomic changes, including mutation accumulation. However, the mechanisms through which changes in genomic architecture influence human longevity have remained obscure. Copy number variants (CNVs), an abundant class of genomic variants, offer unique opportunities for understanding age-related genomic changes. Here we report the spectrum of CNVs in a cohort of 670 Ashkenazi Jewish centenarians, their progeny, and unrelated controls. The average ages of these groups were 97.4 ± 2.8, 69.2 ± 9.2, and 66.5 ± 7.0 respectively. For the first time, we compared different size classes of CNVs, from 1 kB to 100 MB in size. Using a high-resolution custom Affymetrix array, targeting 44,639 genomic regions, we identified a total of 12,166, 22,188, and 10,285 CNVs in centenarians, their progeny, and control groups, respectively. Interestingly, the offspring group showed the highest number of unique CNVs, followed by control and centenarians. While both gains and losses were found in all three groups, centenarians showed a significantly higher average number of both total gains and losses relative to their controls (p < 0.0327, 0.0182, respectively). Moreover, centenarians showed a lower total length of genomic material lost, suggesting that they may maintain superior genomic integrity over time. We also observe a significance fold increase of CNVs among the offspring, implying greater genomic integrity and a putative mechanism for longevity preservation. Genomic regions that experienced loss or gains appear to be distributed across many sites in the genome and contain genes involved in DNA transcription, cellular transport, developmental pathways, and metabolic functions. Our findings suggest that the exceptional longevity observed in centenarians may be attributed to the prolonged maintenance of functionally important genes. These genes are intrinsic to specific genomic regions as well as to the overall integrity of the genomic architecture. Additionally, a strong association between longer CNVs and differential gene expression observed in this study supports the notion that genomic integrity could positively influence longevity.

Frost quakes in wetlands in northern Finland during extreme winter weather conditions and related hazard to urban infrastructure

Abstract. The paper reports the first results of an experiment in northern Finland during winter 2022–2023 that aimed at studying seismic events caused by seasonal freezing in the so-called critical zone (CZ) of the Earth. These events have attracted public attention recently, as multiple reports about them from local inhabitants in Arctic and sub-Arctic areas appeared on social networks. To make an instrumental study of such events, to reveal the relationship between their occurrence and winter weather conditions, and to evaluate the possible hazard, we installed two high-resolution seismic arrays with co-located soil temperature stations at two sites in Finland, one of them being in the city of Oulu in the sub-Arctic area (65.04° N, 25.61° E) and the other one above the polar circle in the municipality of Sodankylä (67.36° N, 26.63° E). The equipment recorded continuous seismic and soil temperature data during November 2022–April 2023. Based on reports from the inhabitants of Talvikangas (Oulu) about the ground shaking and unusual noises on 6 January 2023 and their observations of new fractures on the roads there, we selected the time interval for the identification of frost quakes that originated during that day from continuous seismic records in Talvikangas and in Sodankylä. During the selected time interval, the extremely rapid air temperature drops of about −1.4 °C h−1 in Talvikangas and −0.88 °C h−1 in Sodankylä were observed. We identified and located two types of seismic events – namely, frost quakes with frequencies of about 10–20 Hz, with waveforms like those of tectonic events, and irregularly shaped frost tremors with frequencies of about 120–180 Hz. The sources of frost quakes in Talvikangas are mainly located on irrigated wetland, while in Sodankylä, about 50 % of registered frost quakes were caused by ice fracturing on the Kitinen River. However, several relatively strong events, with their origin in the wetlands, were also recorded. A significant number of sources of frost tremors are confined to wetland areas cut by irrigation channels and to roads cleaned from snow during winter both in Talvikangas and in Sodankylä. We calculated ground accelerations and ground velocities for the strongest events from both groups and compared them to equivalent properties of other seismic signals, like distant local earthquakes in the area, mining production blasts, and cargo train vibration. Our study shows that high-frequency frost tremors corresponding to surface fracture opening in the uppermost frozen surface layer of a thickness of up to 5 cm can directly damage infrastructure objects like roads and basements of buildings. Surface waves, produced by frost quakes and propagating inside the shallow soil layer, have large enough ground accelerations at epicentral distances of hundreds of metres. Therefore, frost quakes should be considered a phenomenon that can potentially damage infrastructures, and they have to be taken into account in seismic hazard assessments. Our research is the first instrumental study of seismic events originating from wetland areas. These events occur as a result of the interaction between the uppermost layer of the solid Earth's CZ and atmosphere processes that deserves further study.

The 85-electrode adaptive optics system of the Swedish 1-m Solar Telescope

We discuss the chosen concepts, detailed design, implementation and calibration of the 85-electrode adaptive optics (AO) system of the Swedish 1-meter Solar Telescope (SST), which was installed in 2013. The AO system is unusual in that it uses a combination of a monomorph mirror with a Shack-Hartmann (SH) wavefront sensor (WFS) and a second high-resolution SH microlens array to aid the characterization, calibration, and modal control of the deformable mirror. An Intel PC workstation performs the heavy image processing associated with cross-correlations and real-time control at a 2 kHz update rate with very low latency. The computer and software continue the successful implementation since 1995 of earlier generations of correlation tracker and AO systems at SST and its predecessor, the 50-cm Swedish Vacuum Solar Telescope, by relying entirely on work-station technology and an extremely efficient algorithm for implementing cross-correlations with the large field of view of the WFS. We describe critical aspects of the design, calibrations, software, and functioning of the AO system. The exceptionally high performance is testified through the highest Strehl ratio (inferred from the measured granulation contrast) of existing meter-class solar telescopes, as demonstrated here at wavelengths shorter than 400 nm and discussed in more detail in a previous separate publication We expect that some aspects of this AO system may also be of interest outside the solar community.

1933: High-resolution Diode array vs film for QA of trigeminal neuralgia treatments with Cyberknife

1933: High-resolution Diode array vs film for QA of trigeminal neuralgia treatments with Cyberknife

A low crosstalk 768-channel of 14-bit analog to digital converters for high resolution array of detectors

This paper presents the design and measurement results of a 768-channel of a 14-bit analog to digital converters. Each sampling channel is equivalent to a pitch of only 8.5 μm with a possible sampling rate from 40 KS/s up to 100 KS/s. Test results show crosstalk of just +/-1 LSB. The circuit architecture and layout structure make it scalable to an exceptionally large format of detectors beyond 1000 channels. The circuit is designed to be used as a side element for multi-channel readout systems or as an IP for transfer to very dense integrated circuits.

Preparation of high-resolution micro/nano dot array by electrohydrodynamic jet printing with enhanced uniformity

The high-resolution array is the basic structure of most kinds of microelectronics. Electrohydrodynamic jet (E-Jet) printing technology is widely applied in manufacturing array structures with high resolution, high material compatibility and multi-modal printing. It is still challenging to acquire high uniformity of printed array with micro-nanometer resolution, which greatly influences the performance and lifetime of the microelectronics. In this paper, to improve the uniformity of the printed array, the influence of each parameter on the uniformity of the E-jet printed dot array is studied on the cobuilt NEJ-E/P200 experimental platform, finding the applied voltage plays the most important role in maintaining the uniformity of the printed array. By appropriately adjusting the printing parameters, the dot arrays with different resolutions from 500 pixels per inch (PPI) to 17,000 PPI are successfully printed. For arrays below and over 10,000 PPI, the deviations of the uniformity are within 5% and 10% respectively. In this work, the dot array over 15,000 PPI is first implemented using E-jet printing. The conclusions acquired by experimental analysis of dot array printing process are of great importance in high resolution array printing as it provides practical guidance for parameters adjustment.

Multiscale hierarchical nanoarchitectonics with stereographically 3D-printed electrodes for water splitting and energy storage

The pursuit of sustainable solutions to address the global energy crisis has led to a keen interest in the advancement of cost-effective and multifunctional electrochemical systems. These systems aim to achieve both zero-carbon emissions and the dual capability to convert and store energy efficiently. The electrochemical splitting of water is one way to create carbon–neutral, clean hydrogen gas. Electrocatalysis and hydrogen evolution in general depends not only on the catalyst but also on its nano- and microstructure, which influences local chemical conditions and hydrogen gas bubble detachment. Therefore, rapid screening of not only potential catalysts but also various structured surfaces is needed for effective electrode fabrication. The fused deposition modeling (FDM) method of 3D printing is frequently used for electrode fabrication using conducting filaments; however, its micro-structuration resolution is limited. Stereolithography can produce complex and fine structures; however, the resins are not conductive and therefore the structures are not suitable for electrode fabrication. In this work, we have fabricated a substrate with high-resolution needle array architecture using stereolithographic (SLA) 3D printing and coated it with Co3Te4-CoTe2 (COT) nanofiber for water splitting and energy storage. The SLA 3D-printed cobalt telluride electrodes showed appreciable performance as a photoelectrocatalyst for the hydrogen evolution reaction (HER) and the oxygen evolution reaction (OER), acting as a bifunctional catalyst. We also demonstrated fabrication of a cobalt telluride based SLA 3D-printed supercapacitor device with multiscale hierarchy. The SLA 3D-printed supercapacitor device exhibited good electrochemical behavior along with high cycling stability. In general, we show here a universal method for SLA conductive electrode fabrication with hierarchical structuring of functional elements and suitable for various applications.