High-resolution Analysis Research Articles

The Identification of Peptide Inhibitors of the Coronavirus 3CL Protease from a Fucus ceranoides L. Hydroalcoholic Extract Using a Ligand-Fishing Strategy.

Brown seaweeds of the Fucus genus represent a rich source of natural antiviral products. In this study, a Fucus ceranoides hydroalcoholic extract (FCHE) was found to inhibit 74.2 ± 1.3% of the proteolytic activity of the free SARS-CoV-2 3CL protease (3CLpro), an enzyme that plays a pivotal role in polyprotein processing during coronavirus replication and has been identified as a relevant drug discovery target for SARS- and MERS-CoVs infections. To purify and identify 3CLpro ligands with potential inhibitory activity using a one-step approach, we immobilized the enzyme onto magnetic microbeads (3CLpro-MPs), checked that the enzymatic activity was maintained after grafting, and used this bait for a ligand-fishing strategy followed by a high-resolution mass spectrometry analysis of the fished-out molecules. Proof of concept for the ligand-fishing capacity of the 3CLpro-MPs was demonstrated by doping the FCHE extract with the substrate peptide TSAVLQ-pNA, resulting in the preferential capture of this high-affinity peptide within the macroalgal complex matrix. Ligand fishing in the FCHE alone led to the purification and identification via high-resolution mass spectrometry (HRMS) of seven hepta-, octa-, and decapeptides in an eluate mix that significantly inhibited the free 3CLpro more than the starting FCHE (82.7 ± 2.2% inhibition). Molecular docking simulations of the interaction between each of the seven peptides and the 3CLpro demonstrated a high affinity for the enzyme's proteolytic active site surpassing that of the most affine peptide ligand identified so far (a co-crystallographic peptide). Testing of the corresponding synthetic peptides demonstrated that four out of seven significantly inhibited the free 3CLpro (from 46.9 ± 6.4 to 76.8 ± 3.6% inhibition at 10 µM). This study is the first report identifying peptides from Fucus ceranoides with high inhibitory activity against the SARS-CoV-2 3CLprotease which bind with high affinity to the protease's active site. It also confirms the effectiveness of the ligand-fishing strategy for the single-step purification of enzyme inhibitors from complex seaweed matrices.

The SPECTRAL Perfusion Arm Clamping dAtaset (SPECTRALPACA) for video-rate functional imaging of the skin

Spectral imaging has the potential to become a key technique in interventional medicine as it unveils much richer optical information compared to conventional RBG (red, green, and blue)-based imaging. Thus allowing for high-resolution functional tissue analysis in real time. Its higher information density particularly shows promise for the development of powerful perfusion monitoring methods for clinical use. However, even though in vivo validation of such methods is crucial for their clinical translation, the biomedical field suffers from a lack of publicly available datasets for this purpose. Closing this gap, we generated the SPECTRAL Perfusion Arm Clamping dAtaset (SPECTRALPACA). It comprises ten spectral videos (∼20 Hz, approx. 20,000 frames each) systematically recorded of the hands of ten healthy human participants in different functional states. We paired each spectral video with concisely tracked regions of interest, and corresponding diffuse reflectance measurements recorded with a spectrometer. Providing the first openly accessible in human spectral video dataset for perfusion monitoring, our work facilitates the development and validation of new functional imaging methods.

Efficient Segmental Isotope Labeling of Integral Membrane Proteins for High-Resolution NMR Studies.

High-resolution structural NMR analyses of membrane proteins are challenging due to their large size, resulting in broad resonances and strong signal overlap. Among the isotope labeling methods that can remedy this situation, segmental isotope labeling is a suitable strategy to simplify NMR spectra and retain high-resolution structural information. However, protein ligation within integral membrane proteins is complicated since the hydrophobic protein fragments are insoluble, and the removal of ligation side-products is elaborate. Here, we show that a stabilized split-intein system can be used for rapid and high-yield protein trans-splicing of integral membrane proteins under denaturing conditions. This setup enables segmental isotope labeling experiments within folded protein domains for NMR studies. We show that high-quality NMR spectra of markedly reduced complexity can be obtained in detergent micelles and lipid nanodiscs. Of note, the nanodisc insertion step specifically selects for the ligated and correctly folded membrane protein and simultaneously removes ligation byproducts. Using this tailored workflow, we show that high-resolution NMR structure determination is strongly facilitated with just two segmentally isotope-labeled membrane protein samples. The presented method will be broadly applicable to structural and dynamical investigations of (membrane-) proteins and their complexes by solution and solid-state NMR but also other structural methods where segmental labeling is beneficial.

Chemical constituents from the Saposhnikovia divaricata and their antiproliferative activity.

Nine compounds were isolated and identified from ethanolic extracts of Saposhnikovia divaricata, including one new alkaloid (1), one new pentacyclic triterpenoid (9), and seven known alkaloids (2-8). Structural elucidation of compounds 1 and 9 was established by 1D and 2D NMR spectra referring to the literature, together with high-resolution mass spectrometric analysis. All compounds were evaluated for antiproliferative activity against two cancer cell lines (LN229, A549) invitro. Compounds (1-9) showed no significant antiproliferative activity.

Core genome multilocus sequence typing (cgMLST) applicable to the monophyletic Klebsiella oxytoca species complex.

The environmental bacterium Klebsiella oxytoca displays an alarming increase of antibiotic-resistant strains that frequently cause outbreaks in intensive care units. Due to its prevalence in the environment and opportunistic presence in humans, molecular surveillance (including resistance marker screening) and high-resolution cluster analysis are of high relevance. Furthermore, K. oxytoca previously described in studies is rather a species complex (KoSC) than a single species comprising at least six closely related species that are not easily differentiated by standard typing methods. To reach a discriminatory power high enough to identify and resolve clusters within these species, whole genome sequencing is necessary. The resolution is achievable with core genome multilocus sequence typing (cgMLST) extending typing of a few housekeeping genes to thousands of core genome genes. CgMLST is highly standardized and provides a nomenclature enabling cross laboratory reproducibility and data exchange for routine diagnostics. Here, we established a cgMLST scheme not only capable of resolving the KoSC species but also producing reliable and consistent results for published outbreaks. Our cgMLST scheme consists of 2,536 core genome and 2,693 accessory genome targets, with a percentage of good cgMLST targets of 98.31% in 880 KoSC genomes downloaded from the National Center for Biotechnology Information (NCBI). We also validated resistance markers against known resistance gene patterns and successfully linked genetic results to phenotypically confirmed toxic strains carrying the til gene cluster. In conclusion, our novel cgMLST enables highly reproducible typing of four different clinically relevant species of the KoSC and thus facilitates molecular surveillance and cluster investigations.

Cu nanoparticle geometry as the key to bicolor behavior in Oregon sunstones — an application of LSPR theory in nanomineralogy

Abstract The coloration mechanism of Oregon sunstone is a classic and controversial topic in mineralogy because of the unique co-existence of anisotropic (green-red) and isotropic (red) color zones within single feldspar crystals. After nearly 50 years of research, no models proposed to date have satisfactorily accounted for all observed optical phenomena. Here we present high-resolution transmission electron microscopy analyses of samples prepared by focused ion beam extraction along specific crystal directions. In both the anisotropic and the isotropic color zones, we observed Cu nanoparticles (NPs) included within plagioclase but with different geometries. In the isotropic (red) zone, NPs were randomly distributed nano-spheres or nano-ellipsoids (8.7-12 nm in diameter) with an aspect ratio of 1-1.3. In contrast, in dichroic (green/red) zones, NPs were directionally-aligned nano-rods (8.5-21 nm along the long axis) with an aspect ratio of ~2.5. We applied localized surface plasmon resonance (LSPR) theory to simulate absorption spectra, and we developed a model to explain the observed optical properties. LA-ICP-MS and polarized UV-Vis spectroscopy were also performed to confirm our conclusions. This study systematically reveals the existence and optical influence of variably shaped metal-NP inclusions in feldspar crystals. Furthermore, it demonstrates the necessity of including LSPR in the canon of mineral coloration mechanisms. Cu-NP-bearing labradorite has been shown to exhibit third-order non-linear optical properties, and approaches that incorporate NP shapes as well as sizes will assist in the design of NP-embedded optical materials with tailored optical behaviors.

High-Resolution Depth-Discrete Analysis of PFAS Distribution and Leaching for a Vadose-Zone Source at an AFFF-Impacted Site.

The long-term leaching of polyfluoroalkyl substances (PFAS) within the vadose zone of an AFFF application site for which the depth to groundwater is approximately 100 m was investigated by characterizing the vertical distribution of PFAS in a high spatial resolution. The great majority (99%) of PFAS mass resides in the upper 3 m of the vadose zone. The depths to which each PFAS migrated, quantified by moment analysis, is an inverse function of molar volume, demonstrating chromatographic separation. The PFAS were operationally categorized into three chain-length groups based on the three general patterns of retention observed. The longest-chain (>∼335 cm3/mol molar volume) PFAS remained within the uppermost section of the core, exhibiting minimal leaching. Conversely, the shortest-chain (<∼220 cm3/mol) PFAS accumulated at the bottom of the interval, which coincides with the onset of a calcic horizon. PFAS with intermediate-chain lengths were distributed along the length of the core, exhibiting differential magnitudes of leaching. The minimal or differential leaching observed for the longest- and intermediate-chain-length PFAS, respectively, demonstrates that retention processes significantly impacted migration. The accumulation of shorter-chain PFAS at the bottom of the core is hypothesized to result from limited deep infiltration and potential-enhanced retention associated with the calcic horizon.

A high-resolution map of functional miR-181 response elements in the thymus reveals the role of coding sequence targeting and an alternative seed match.

MicroRNAs (miRNAs) are critical post-transcriptional regulators in many biological processes. They act by guiding RNA-induced silencing complexes to miRNA response elements (MREs) in target mRNAs, inducing translational inhibition and/or mRNA degradation. Functional MREs are expected to predominantly occur in the 3' untranslated region and involve perfect base-pairing of the miRNA seed. Here, we generate a high-resolution map of miR-181a/b-1 (miR-181) MREs to define the targeting rules of miR-181 in developing murine Tcells. By combining a multi-omics approach with computational high-resolution analyses, we uncover novel miR-181 targets and demonstrate that miR-181 acts predominantly through RNA destabilization. Importantly, we discover an alternative seed match and identify a distinct set of targets with repeat elements in the coding sequence which are targeted by miR-181 and mediate translational inhibition. In conclusion, deep profiling of MREs in primary cells is critical to expand physiologically relevant targetomes and establish context-dependent miRNA targeting rules.

Comparison of an Unlabeled Probe High-Resolution Melting Analysis Assay (HRMA) for Factor V Leiden 1691 G/A Mutation to a Fluorogenic 5' Nuclease PCR Hydrolysis Assay.

The clinically significant Factor V Leiden (FVL) point mutation (1691 G/A) causes replacement of Arg with Gln (glutamine), preventing activated protein C from inactivating Factor V leading to a lengthened clotting process. Individuals with the Factor V Leiden mutations have an increased risk for venous thrombosis. The aim of this study is to compare an unlabeled probe high-resolution melting analysis (HRMA) assay for Factor V Leiden mutation to a TaqMan hydrolysis assay (fluorogenic 5' nuclease PCR hydrolysis assay). HRMA is a post-PCR, homogenous, closed-tube system for the detection of sequence variants. Post-PCR, the amplicons are heated gradually until the melting temperature is reached and the fluorescent dye unbinds from the amplicon and exhibits low fluorescence. A melt-curve analysis is generated that is characteristic of a particular sequence variant. Therefore, HRMA allows for comparison of one base changes in genetic sequences based on their differences in melting rate. Blood samples were collected in EDTA tubes and DNA extracted using the Roche MagNaPure. Reactions of both HRMA and TaqMan were carried out on 3 controls (1691 G/G, 1691 G/A, and 1691 G/G and G/A) and 20 samples. The genotypes for 3 reference controls purchased from Coriell (F5 1691 G/G, FVL 1691 G/A, and Heterozygote 1691 G/G and G/A) were confirmed by both the HRMA and TaqMan FVL assays. All 20 samples were confirmed to be F5 1691 G/G by both HRMA and TaqMan assays. Comparing the results of the unlabeled probe HRMA FVL assay with a real-time TaqMan probe end point genotyping assay resulted in 100% sensitivity and 100% specificity for both assays.

Tectonic influence on the evolutionary dynamics of deep-water channel systems along the active accretionary prism margin in the Rakhine Basin, Myanmar: A high-resolution 3d seismic analysis

This study reveals the morphological transformations of a deep-water channel system within the Rakhine Basin in the northeastern Bay of Bengal through a comprehensive analysis of high-resolution 3D seismic data integrated with drilling logs. Employing the “source-channel-sink” paradigm, this investigation examined the impact of various factors, including tectonic transformations, sediment influx, slope dynamics, climatic changes, and relative sea-level fluctuations, on the evolutionary trajectory of these channel systems. Applying precise time-slicing techniques integrating root-mean-square amplitude attributes, coherent amplitude attributes, and horizontal amplitudes on seismic profiles, this investigation recognized three distinct stages in the evolution of channel-levee complexes (CLCs): the Middle Miocene erosional deep-water channel-levee complex (CLC-1), the Pliocene erosional-depositional deep-water channel-levee complex (CLC-2), and the Pleistocene depositional deep-water channel-levee complex (CLC-3). Comparative analysis revealed that the CLC-3 exhibits unique characteristics, including shallower channel depth (D), wider channel width (WC), extensive U-shaped cross-sectional area (S), broader natural levee width (WL) and height (H), and the highest tortuosity coefficient (LC/LS) when contrasted with the other two CLCs. Furthermore, this study substantiated how tectonic processes, primarily the collision between the Indo-Eurasian plates, resulting in the Himalayan and Indo-Burma Range orogenies, have shaped the region's geological and climatic framework, thereby influencing monsoon circulation and precipitation patterns, which in turn augmented detrital material influx into the basin. Moreover, this tectonic collision has led to gradual changes in the slope gradient of the Rakhine Basin and its deep-water areas, impacting internal flow velocities and channel curvature, thus governing deep-water channel systems' development and spatial distribution. Also, episodic sea level fluctuations were identified as significant contributors to sediment transport from shelves to deep-water regions and sediment deposit reworking. Overall, this study underscores the role of tectonic changes after the Eocene in driving the evolutionary dynamics of the deep-water channel system within the Rakhine Basin, Myanmar.

Alpibectir: Early Qualitative and Quantitative Metabolic Profiling from a First-Time-in-Human Study by Combining 19F-NMR (Nuclear Magnetic Resonance), 1H-NMR, and High-Resolution Mass Spectrometric Analyses.

Alpibectir (also known as BVL-GSK098 and GSK3729098) is a new chemical entity (NCE) with a novel mechanism for the treatment of tuberculosis. The disposition of alpibectir was determined in subjects from a first-time-in-human trial after a single oral dose of 40 mg and after 7 days repeat dosing at 30 mg. Here we present a combined approach of 19F-NMR (nuclear magnetic resonance), 1H-NMR, and high-resolution mass spectrometry (HRMS) to confidently determine the human metabolic fate of alpibectir. Utilizing multiple sites of fluorination in the molecule, it was possible to fractionate human urine and plasma to confidently detect and quantify the metabolite responses using 19F-NMR. Qualitative detection and structural characterization of F-containing NMR fractions were performed using complementary high-resolution ultra-high performance liquid chromatography tandem mass spectrometry (UHPLC-MS/MS) analyses to further add confidence to the metabolite responses in these fractions. Subsequent 1H-NMR then provided unequivocal standard-free structural confirmation for key metabolites, which would not be possible with conventional radioactivity detection and LC-MS/MS techniques. Alpibectir was shown to undergo extensive hydrolysis of the central amide moiety, where the resultant N-dealkylated amine and trifluorobutyric acid products were detected initially by unbiased 19F-NMR detection along with major downstream biotransformations to form a carbamoyl glucuronide conjugate and trifluoroacetic acid, respectively. Parallel UHPLC-MS/MS analyses provided confirmatory or additional structural characterization only where relevant. These concerted data allowed for the qualitative metabolic profile and quantitative determination of drug-related material (DRM) in urine and plasma, along with the percentage of dose excreted in urine, to be reported in a comprehensive, efficient, and data-led manner. SIGNIFICANCE STATEMENT: Combining the selectivity of 19F-NMR (nuclear magnetic resonance) for unfractionated samples as first-intent, data-led sample fractionation prior to 19F-NMR and structure-rich 1H-NMR detection, along with the sensitivity of high-resolution ultra-high performance liquid chromatography tandem mass spectrometry (UHPLC-MS/MS), a novel alternative for time-efficient detection and quantification of drug-related material (DRM) in human without use of radiolabeled drug is reported. This allowed more complete data rationalization of human metabolism, permitting early risk assessment and progression of the development of antitubercular agent, alpibectir.

SDHAF1 confers metabolic resilience to aging hematopoietic stem cells by promoting mitochondrial ATP production

Aging generally predisposes stem cells to functional decline, impairing tissue homeostasis. Here, we report that hematopoietic stem cells (HSCs) acquire metabolic resilience that promotes cell survival. High-resolution real-time ATP analysis with glucose tracing and metabolic flux analysis revealed that old HSCs reprogram their metabolism to activate the pentose phosphate pathway (PPP), becoming more resistant to oxidative stress and less dependent on glycolytic ATP production at steady state. As a result, old HSCs can survive without glycolysis, adapting to the physiological cytokine environment in bone marrow. Mechanistically, old HSCs enhance mitochondrial complex II metabolism during stress to promote ATP production. Furthermore, increased succinate dehydrogenase assembly factor 1 (SDHAF1) in old HSCs, induced by physiological low-concentration thrombopoietin (TPO) exposure, enables rapid mitochondrial ATP production upon metabolic stress, thereby improving survival. This study provides insight into the acquisition of resilience through metabolic reprogramming in old HSCs and its molecular basis to ameliorate age-related hematopoietic abnormalities.

Combined electrical resistivity tomography and high-resolution shallow seismic analysis for coal exploration in Talcher Coalfield, India

Combined electrical resistivity tomography and high-resolution shallow seismic analysis for coal exploration in Talcher Coalfield, India

Honeycomb gold specimen supports enabling orthogonal focussed ion beam-milling of elongated cells for cryo-ET

Cryo-focussed ion beam (FIB)-milling is a powerful technique that opens up thick, cellular specimens to high-resolution structural analysis by electron cryotomography (cryo-ET). FIB-milled lamellae can be produced from cells on grids, or cut from thicker, high-pressure frozen specimens. However, these approaches can put geometrical constraints on the specimen that may be unhelpful, particularly when imaging structures within the cell that have a very defined orientation. For example, plunge frozen rod-shaped bacteria orient parallel to the plane of the grid, yet the Z-ring, a filamentous structure of the tubulin-like protein FtsZ and the key organiser of bacterial division, runs around the circumference of the cell such that it is perpendicular to the imaging plane. It is therefore difficult or impractical to image many complete rings with current technologies. To circumvent this problem, we have fabricated monolithic gold specimen supports with a regular array of cylindrical wells in a honeycomb geometry, which trap bacteria in a vertical orientation. These supports, which we call “honeycomb gold discs”, replace standard EM grids and when combined with FIB-milling enable the production of lamellae containing cross-sections through cells. The resulting lamellae are more stable and resistant to breakage and charging than conventional lamellae. The design of the honeycomb discs can be modified according to need and so will also enable cryo-ET and cryo-EM imaging of other specimens in otherwise difficult to obtain orientations.

Characterization of Respirable Coal Mine Dust Recovered from Fibrous Polyvinyl Chloride Filters by Scanning Electron Microscopy

The characterization of respirable dust on the basis of constituent fractions and particle sizes is increasingly of concern for evaluating exposure hazards. For high-resolution particle analysis, scanning electron microscopy with energy dispersive X-ray (SEM-EDX) can be an effective tool. However, it requires particles to be deposited on a smooth, uniform substrate such as a polycarbonate (PC) filter for optimal results. While direct sampling onto PC is possible, this is not the standard approach in many situations. For example, in coal mines, respirable dust samples have typically been collected onto polyvinyl chloride (PVC) filters because they are intended for gravimetric and/or infrared spectroscopy analysis. Such fibrous substrates are not ideal for SEM-EDX (or other microscopy), but an effective method to recover and redeposit the dust particles could render such samples suitable for the additional analysis. Here, we present a simple method and compare SEM-EDX results for paired samples analyzed directly on PC and following recovery from PVC and redeposition on PC. Both laboratory-generated dust samples (n = 10 pairs) and field samples of respirable coal mine dust (n = 44 pairs) are included in this study. Although some changes in particle size distributions were observed between samples analyzed directly and those that were recovered and redeposited prior to analysis, the results indicate the dust recovery method generally yields a representative sample in terms of mineral constituents. That said, results also highlighted the effects of high particle loading density on individual particle analysis. Considering all sample pairs, those with similar loading density between the directly analyzed and recovered sample tended to exhibit similar mineralogy distributions. This was generally the case for the lab-generated sample pairs, and the Freeman-Halton exact test of independence indicated that the samples in just three (of 10) pairs were in disagreement in terms of their mineralogy distributions. On the other hand, for the field samples, the directly analyzed sample often had higher loading density than the recovered sample; and the Freeman-Halton test showed that 25 (of 44) pairs were in disagreement. However, the effect of possible particle agglomeration on the directly analyzed samples cannot be ruled out—and exploration of this factor was beyond the scope of the current study.

X-ray Fluorescence Core Scanning for High-Resolution Geochemical Characterisation of Soils

X-ray fluorescence (XRF) core scanners are commonly used for fine-scale geochemical analysis in sediment studies, but data are semi-quantitative and require calibration to convert geochemical element counts to concentrations. Application of XRF core scanning in soil science remains largely untapped. This study employed an ITRAX core scanner to scan grassland soil cores and developed a novel calibration method based on a chemometric approach to characterise soil geochemistry. As soil samples are collected based on depth sampling, this study investigated whether higher resolution element concentrations could be inferred from lower resolution reference samples and if regression models from multiple cores could apply to a new core at the same resolution. Reference concentrations were obtained for all cores at 10 cm intervals, with validation conducted at 1 cm for a single core. Two calibration curve types were proposed: one based on the single core’s 10 cm data to validate references at 1 cm intervals; and another using all cores, with each core serving as a test item after exclusion from the training set. Various preprocessing measures and feature selection techniques were tested. Results showed successful calibration for elements Ca, P, Zn, Sr, and S, with high R2 values of 0.94, 0.93, 0.93, 0.92 and 0.91, respectively. The study presents a novel method for calibrating XRF core scanning element counts, demonstrating its potential for high-resolution soil analysis.

High-Throughput Compound Quality Assessment with High-Mass-Resolution Acoustic Ejection Mass Spectrometry: An Automatic Data Processing Toolkit.

Pharmacological screening heavily relies on the reliability of compound libraries. To ensure the accuracy of screening results, fast and reliable quality control (QC) of these libraries is essential. While liquid chromatography (LC) with ultraviolet (UV) or mass spectrometry (MS) detection has been employed for molecule QC on small sample sets, the analytical throughput becomes a bottleneck when dealing with large libraries. Acoustic ejection mass spectrometry (AEMS) is a high-throughput analytical platform that covers a broad range of chemical structural space. In this study, we present the utilization of an AEMS system equipped with a high-resolution MS analyzer for high-throughput compound QC. To facilitate efficient data processing, which is a key challenge for such a high-throughput application, we introduce an automatic data processing toolkit that allows for the high-throughput assessment of the sample standards' quantitative and qualitative characteristics, including purity calculation with the background processing option. Moreover, the toolkit includes a module for quantitatively comparing spectral similarity with the reference library. Integrating the described high-resolution AEMS system with the data processing toolkit effectively eliminates the analytical bottleneck, enabling a rapid and reliable compound quality assessment of large-scale compound libraries.

Carbon pricing and system reliability impacts on pathways to universal electricity access in Africa.

Off-grid photovoltaic systems have been proposed as a panacea for economies with poor electricity access, offering a lower-cost "leapfrog" over grid infrastructure used in higher-income economies. Previous research examining pathways to electricity access may understate the role of off-grid photovoltaics as it has not considered reliability and carbon pricing impacts. We perform high-resolution geospatial analysis on universal household electricity access in Sub-Saharan Africa that includes these aspects via least-cost pathways at different electricity demand levels. Under our "Tier 3" demand reference scenario, 24% of our study's 470 million people obtaining electricity access by 2030 do so via off-grid photovoltaics. Including a unit cost for unmet demand of 0.50 US dollars ($)/kWh, to penalise poor system reliability increases this share to 41%. Applying a carbon price (around $80/tonne CO2-eq) increases it to 38%. Our results indicate considerable diversity in the level of policy intervention needed between countries and suggest several regions where lower levels of policy intervention may be effective.

Exploring structure/property relationships to health and environmental hazards of polymeric polyisocyanate prepolymer substances-3. Aquatic exposure and hazard of aliphatic diisocyanate-based prepolymers.

The water extractability and acute aquatic toxicity of seven aliphatic diisocyanate-based prepolymer substances were investigated to determine if lesser reactivity of the aliphatic isocyanate groups, as well as increased ionization potential of the expected (aliphatic amine-terminated) polymeric hydrolysis products, would influence their aquatic behavior compared to that of previously investigated aromatic diisocyanate-based prepolymers. At loading rates of 100 and 1,000mg/L, only the substances having log Kow ≤9 exhibited more than 1% extractability in water, and a maximum of 66% water extractability was determined for a prepolymer having log Kow = 2.2. For the more hydrophobic prepolymer substances (log Kow values from 18-37), water extractability was negligible. High-resolution mass spectrometric analyses were performed on the water-accommodated fractions (WAF) of the prepolymers, which indicated the occurrence of primary aliphatic amine-terminated polymer species having backbones and functional group equivalent weights aligned to those of the parent prepolymers. Measurements of reduced surface tension and presence of suspended micelles in the WAFs further supported the occurrence of these surface-active cationic polymer species as hydrolysis products of the prepolymers. Despite these characteristics, the water-extractable hydrolysis products were practically non-toxic to Daphnia magna. All of the substances tested exhibited 48-h EL50 values of >1,000mg/L, with one exception of EL50 = 157mg/L. The results from this investigation support a grouping of the aliphatic diisocyanate-based prepolymers as a class of water-reactive polymer substances having predictable aquatic exposure and a uniformly low hazard potential, consistent with that previously demonstrated for the aromatic diisocyanate-based prepolymers.

Long-term trend and variability in surface temperatures over Emilia-Romagna from 1962 to 2022

Scientific interest is increasingly drawn towards regional meteorological extremes, given their impacts on populations, infrastructure, and ecosystems. These extremes are shaped by complex interactions between internal climate variability and long-term trends. The aim of the present work is to evaluate changes in high-frequency variability and the influence of long-term trends on the frequency of occurrences of extremes, with a focus on surface temperatures over the period from 1962 to 2022 in Emilia-Romagna, a region of Northern Italy. Daily data of 2 m air temperatures averaged over the region are retrieved from ERACLITO, a high-resolution climate analysis. The distributions of daily temperature anomalies show a general broadening in 1992–2022 with respect to 1962–1991. This is true for maximum, minimum, and mean daily surface temperatures, especially during the summer and spring seasons. A significant warming trend of 0.37 °C/decade is detected in annual mean surface temperatures over the period considered. The study is completed with a comparison between the observed frequency of record-breaking annual temperature events, a hypothetical stationary climate distribution and a theoretical derivation that accounts for changes in trends and variability. During the last decade, the theoretical count of extreme events is 1.26, which yields a likelihood of 86% that this is owed to the trend rather than interannual variability. Idealized experiments demonstrate that the expected occurrences of record-breaking events in future decades depend on the warming rate rather than the warming level. Finally, an analysis performed at seasonal level shows that the majority (minority) of record events are occurring in the summer (spring) seasons.