High Refractive Index Layers Research Articles

Massive Enhancement of Optical Transmission across a Thin Metal Film via Wave Vector Matching in Grating-Coupled Surface Plasmon Resonance.

We demonstrate how distinct surface plasmon resonance modes on opposite sides of a metal-coated grating can be coupled across the metal film. This coupling occurs by matching the resonance conditions on each side of the grating by tuning the refractive index directly adjacent to the metal film. In the first example, we deposited a high refractive index layer of tin oxide on top of the grating to red-shift the front side surface plasmon until it coupled with the backside surface plasmon across a semitransparent ∼45 nm thin silver grating. By shifting the resonance condition of the nearby surface plasmon, this high refractive index coating creates an effective matching of wave vectors across the metal film, allowing them to couple and enhance the optical response. A massive increase in the magnitude of enhanced transmission is observed, increasing from a 6-fold transmission enhancement through a bare silver grating to a near 100-fold enhancement after deposition of a tin oxide layer of appropriate thickness (∼310 nm). This optical transmission enhancement is then probed through computational modeling and by experiments with liquids of various refractive index values. The matched system shows an increased amplitude sensitivity with respect to refractive index changes and a waveguide like behavior within the tin oxide film. As an alternative configuration, we also demonstrate coupling the front and back-side plasmon modes by using a lower refractive index substrate in order to blue-shift the back-side surface plasmon. Coupling between the two plasmon modes is then demonstrated by introducing aqueous solutions of various refractive index values. Under the proper conditions, this matched system also shows a substantial enhancement in transmission. This technique of wave vector matching provides a route to substantially increasing the plasmon enhanced optical transmission through metal gratings, which has potential application in improved plasmonic sensing, spectroscopy, and plasmon-based optical devices.

Study of aging effects on optical properties and residual stress of HfO2 thin film

Hafnium dioxide (HfO2) thin films are generally used as high refractive index layers in optical coating devices. Aging effects on optical and mechanical properties of the films are very crucial for long-standing performance and stability of the devices, therefore knowledge of the aging effects is very important. In the present work, HfO2 thin film has been prepared using electron beam evaporation. The optical properties and residual stress of the film have been investigated in six months interval over a period of one-year in ambient condition to probe its aging behaviour. The measured refractive index increases with aging and its change is Δn = 0.011 at wavelength of 550 nm. The dispersion parameters such as εL, N/m*, εs, and Ed increase with aging, while E0 decreases. The measured film residual stress is tensile in nature. The residual stress decreases with aging and the change in stress in the film is around 78% in a year. A simple model has been utilized to establish and explain a correlation between the measured stress and the film porosity which varies with aging time. The results suggest that the change in the residual stress is significant in contrast to a very small change in the refractive index with aging.

Surface plasmon resonance biosensor based on graphene and grating excitation.

A surface plasmon resonance biosensor based on a graphene-decorated grating excitation structure is proposed in this paper. The biosensor consists of a three-layer structure, including a graphene layer, a grating layer, and a high refractive index layer. The material of the grating layer is silica. The graphene is physically deposited on the grating ridges. An incident light with transverse magnetic polarization is used to excite surface plasmons in the mid-infrared spectral region, which is highly localized at both ends of the graphene layer. The property of the sensor is improved by the high refractive index dielectric layer, which enhances the absorption of incident light and increases the depth of the spectra. The finite-difference time-domain method is used to simulate the property of the sensor. The structure of the sensor could be optimized by changing the structural parameters and comparing the simulation results. The effective refractive index (RI) on the surface and the wavelength of the reflective resonance absorption peak will be changed when the surface of graphene adsorbs the surrounding analyte. The results show that the relationship between the analyte RI and the resonance wavelength is linear. The measurement range of analyte RI is 1-1.8, and the sensitivity is 2780nm/RIU.

Optimised Performance of Non-Dispersive Infrared Gas Sensors Using Multilayer Thin Film Bandpass Filters

In this work, performance improvements are described for a low-power consumption non-dispersive infrared (NDIR) methane (CH4) gas sensor using customised optical thin film bandpass filters (BPFs) centered at 3300 nm. BPFs shape the spectral characteristics of the combined mid-infrared III–V based light emitting diode (LED)/photodiode (PD) light source/detector optopair, enhancing the NDIR CH4 sensor performance. The BPFs, deposited using a novel microwave plasma-assisted pulsed DC sputter deposition process, provide room temperature deposition directly onto the temperature-sensitive PD heterostructure. BPFs comprise germanium (Ge) and niobium pentoxide (Nb2O5) alternating high and low refractive index layers, respectively. Two different optical filter designs are progressed with BPF bandwidths (BWs) of 160 and 300 nm. A comparison of the modelled and measured NDIR sensor performance is described, highlighting the maximised signal-to-noise ratio (SNR) and the minimised cross-talk performance benefits. The BPF spectral stability for various environmental temperature and humidity conditions is demonstrated.

Refractive index sensing by Brillouin scattering in side-polished optical fibers.

In this Letter, we demonstrate the possibility to measure the refractive index of a liquid, using the stimulating Brillouin scattering in a 3-cm-long side-polished optical fiber. In addition, we show that by depositing a high-refractive index layer on the polished surface the sensitivity of the Brillouin frequency shift (BFS) can be increased due to a higher penetration of the evanescent field in the outer medium. Experiments show a maximum BFS change of about 11MHz when varying the refractive index of the external medium from 1 (air) to 1.402, and a BFS sensitivity to refractive index of about 293MHz/RIU around 1.40.

High Reflectivity YDH/SiO2 Distributed Bragg Reflector for UV-C Wavelength Regime

A distributed Bragg reflector (DBR) composed of Y2O3-doped HfO2 (YDH)/SiO2 layers with high reflectivity spectrum centered at a wavelength of ∼240 nm is fabricated using radio-frequency magnetron sputtering. Before the DBR deposition, optical properties for a single layer of YDH, SiO2, and HfO2 thin films were studied using spectroscopic ellipsometry and spectrophotometry. To investigate the performance of YDH as a material for the high refractive index layer in the DBR, a comparison of its optical properties was made with HfO2 thin films. Due to larger optical bandgap, the YDH thin films demonstrated higher transparency, lower extinction coefficient, and lower absorption coefficient in the UV-C regime (especially for wavelengths below 250 nm) compared to the HfO2 thin films. The fabricated YDH/SiO2 DBR consisting of 15 periods achieved a reflectivity higher than 99.9% at the wavelength of ∼240 nm with a stopband of ∼50 nm. The high reflectivity and broad stopband of YDH/SiO2 DBRs will enable further advancement of various photonic devices such as vertical-cavity surface-emitting lasers, resonant-cavity light-emitting diodes, and resonant-cavity photodetectors operating in the UV-C wavelength regime.

Near-infrared graded-index antireflection coating from ZnSe hollow nanospheres

A double-layer broadband antireflective coating (ARC) with graded-index was prepared on ZnSe substrate by using ZnSe hollow nanoparticles (HNPs). The bottom high-refractive-index layer (HIL) was made by closed-packed ZnSe HNPs array, and the top low-refractive-index layer (LIL) was gained by a sacrificial template method. The refractive indices of both layers are close to the theoretical model. A high transmittance, up to 91.5%, is achieved in the near-infrared spectral range with incident angles ranging from 0° to 30°. It also exhibits excellent mechanical stability, and sustains high transmittance over a much wider optical band, compared to the single-index ARC, making it promising for further applications.

Flexibly tunable high-quality-factor induced transparency in plasmonic systems

The quality (Q) factor and tunability of electromagnetically induced transparency (EIT)-like effect in plasmonic systems are restrained by the intrinsic loss and weak adjustability of metals, limiting the performance of the devices including optical sensor and storage. Exploring new schemes to realize the high Q-factor and tunable EIT-like effect is particularly significant in plasmonic systems. Here, we present an ultrahigh Q-factor and flexibly tunable EIT-like response in a novel plasmonic system. The results illustrate that the induced transparency distinctly appears when surface plasmon polaritons excited on the metal satisfy the wavevector matching condition with the guided mode in the high-refractive index (HRI) layer. The Q factor of the EIT-like spectrum can exceed 2000, which is remarkable compared to that of other plasmonic systems such as plasmonic metamaterials and waveguides. The position and lineshape of EIT-like spectrum are strongly dependent on the geometrical parameters. An EIT pair is generated in the splitting absorption spectra, which can be easily controlled by adjusting the incident angle of light. Especially, we achieve the dynamical tunability of EIT-like spectrum by changing the Fermi level of graphene inserted in the system. Our results will open a new avenue toward the plasmonic sensing, spectral shaping and switching.

Modal properties of a strip-loaded horizontal slot waveguide

BackgroundChannel waveguides have been developed for years to comply with the need for smaller footprint and better integration in photonics circuits. However, they are still suffering from fabrication complexity and optical losses. These two limitations can be addressed by combining two types of channel waveguides, namely strip-loaded and slot waveguide.MethodsWe present a systematic study of the geometrical parameters of a strip-loaded horizontal slot waveguide and their influence on the characteristics of the device. Simulations and experiments are carried out to understand the behavior of the electromagnetic field inside such a waveguide. In particular, the influence of the high and low refractive index layers and the loading-strip on the key characteristics of the structure, i.e., the confinement factor and the effective index, are investigated theoretically and compared with experimental values.ResultsThe main properties of this waveguide platform are a low lateral index contrast, a high vertical field confinement, and low-propagation losses (1.4 dB/cm).ConclusionsOur results show that this platform is highly versatile, easy to fabricate and low-losses. We also show that the geometry of the mode can be tuned to suit the application.

Brewster-angle 50%-50% beam splitter for p-polarized infrared light using a high-index quarter-wave layer deposited on a low-index prism.

A quarter-wave layer (QWL) of high refractive index, which is deposited on a transparent prism of low refractive index, can be designed to split an incident p-polarized light beam at the Brewster angle (BA) of the air-substrate interface into p-polarized reflected and transmitted beams of equal intensity (50% each) that travel in orthogonal directions. For reflection of p-polarized light at the BA, the supported QWL functions as a free-standing (unsupported) pellicle. An exemplary design is presented that uses SixGe1-x QWL deposited on an IRTRAN1 prism for applications (such as Michelson and Mach-Zehnder interferometry) with a variable compositional fraction x in the 2-6 μm mid-IR spectral range.

Optical properties of periodic, quasi-periodic, and disordered one-dimensional photonic structures

Photonic structures are building blocks for many optical applications in which light manipulation is required spanning optical filtering, lasing, light emitting diodes, sensing and photovoltaics. The fabrication of one-dimensional photonic structures is achievable with a variety of different techniques, such as spin coating, sputtering, evaporation, pulse laser deposition, or extrusion. Such different techniques enable facile integration of the photonic structure with many types of devices. Photonic crystals are characterized by a spatial modulation of the dielectric constant on the length scale of the wavelength of light giving rise to energy ranges where light cannot propagate through the crystal – the photonic band gap. While mostly photonic crystals are referred to as periodic arrangements, in this review we aim to highlight as well how aperiodicity and disorder affects light modulation. In this review article, we introduce the concepts of periodicity, quasi-periodicity, and disorder in photonic crystals, focussing on the one-dimensional case. We discuss in detail the physical peculiarities, the fabrication techniques, and the applications of periodic, quasi-periodic, and disorder photonic structures, highlighting how the degree of crystallinity matters in the manipulation of light. We report different types of disorder in 1D photonic structures and we discuss their properties in terms of light transmission. We discuss the relationship between the average total transmission, in a range of wavelengths around the photonic band gap of the corresponding photonic crystal, and the homogeneity of the photonic structures, quantified by the Shannon index. Then we discuss the light transmission in structures in which the high refractive index layers are aggregated in clusters following a power law distribution. Finally, in the case of structures in which the high refractive index layers are aggregated in clusters with a truncated uniform distribution, we discuss: i) how different refractive index contrast tailors the total light transmission; ii) how the total light transmission is affected by the introduction of defects made with a third material.

High-tech functional polymers designed for applications in organic electronics

Several examples of polymeric materials specially developed for optoelectronic applications are highlighted demonstrating that by fine-tuning chemistry and architecture in highly aromatic polymers significant progress can be made in their performance. Thus, polymeric semiconductors of controlled architectures and high charge mobility had been prepared. The use of branching allowed to realize highly aromatic polymers of high solubility suitable for solution processing as dielectric materials in OFETs and as light-outcoupling layer of high refractive index in OLEDs.

Scintillator Light Emission Enhancement via Nanostructure and Plasmonic Design

ABSTRACTRecent work in the development of glass-ceramic scintillators at the Georgia Tech Research Institute (GTRI) has focused on modifying formulation of the oxide host glass and scintillating crystal phase, secondary heat treatment (ceramization) schedule, and processing improvement to ensure optical quality. These efforts have yielded considerable performance improvements to glass-ceramic scintillators, and have made them among the most promising composite scintillators under investigation. However, these materials still fall short of current commercially-available single crystal scintillators, and so new avenues must be pursued for continued improvements. The present investigation uses predictive simulations to inform the materials selection and process design for high refractive index layers to improve light extraction from the scintillator, and increased light output via bulk or surface plasmon interactions.

Optical Microbubble Resonators with High Refractive Index Inner Coating for Bio-Sensing Applications: An Analytical Approach.

The design of Whispering Gallery Mode Resonators (WGMRs) used as an optical transducer for biosensing represents the first and crucial step towards the optimization of the final device performance in terms of sensitivity and Limit of Detection (LoD). Here, we propose an analytical method for the design of an optical microbubble resonator (OMBR)-based biosensor. In order to enhance the OMBR sensing performance, we consider a polymeric layer of high refractive index as an inner coating for the OMBR. The effect of this layer and other optical/geometrical parameters on the mode field distribution, sensitivity and LoD of the OMBR is assessed and discussed, both for transverse electric (TE) and transverse magnetic (TM) polarization. The obtained results do provide physical insights for the development of OMBR-based biosensor.

Novel-stratified low reflectivity anti-reflective coatings derived from self-assembly of high refractive index nanoparticles

We describe new anti-reflective multilayer optical coatings formed from a single liquid coating solution in a single coating step. The nanoparticles in these coatings self-organize as the liquid coating dries on the substrate. The self-assembly of the nanoparticles results in the formation of a two-layer dielectric stack composed of alternating high and low refractive index layers. For the first time, using this process, an ultra-low reflectivity film can be inexpensively and simply formed using high refractive index titanium oxide nanoparticles and a low refractive index fluoropolymer. These films can be made scratch or abrasion resistant by the inclusion of silane coupling agents and low refractive index nanoparticles.

Linearly polarized Q-switched ceramic laser made with anisotropic nanostructured thin films.

A polarizing laser mirror was made of an alternating sequence of low and high refractive index layers of titanium oxide using glancing angle deposition (GLAD). Large refractive index contrast and large birefringence, reaching 0.5 and 0.1, respectively, could be obtained from one single raw material by changing the deposition conditions. The laser mirror could withstand a train of 2.7ns, single-mode pulses at 680Hz, λ=1030 nm, and peak power density of 670 MW/cm2 when used as an output coupler of a passively Q-switched (Yb0.1Y0.9)3Al5O12 ceramic laser. The polarization extinction ratio was found to be better than 30dB both in continuous-wave and pulsed regimes. These results indicate that polarizing laser mirrors made from nanostructured thin films with GLAD, in addition to being simple to fabricate, can withstand high pulse energy density.

Periodic transmission peak splitting in one dimensional disordered photonic structures

In the present paper we present ways to modulate the periodic transmission peaks arising in disordered one dimensional photonic structures with hundreds of layers. Disordered structures in which the optical length nd (n is the refractive index and d the layer thickness) is the same for each layer show regular peaks in their transmission spectra. A proper variation of the optical length of the layers leads to a splitting of the transmission peaks. Notably, the variation of the occurrence of high and low refractive index layers, gives a tool to tune also the width of the peaks. These results are of highest interest for optical application, such as light filtering, where the manifold of parameters allows a precise design of the spectral transmission ranges.

Medium range structural order in amorphous tantala spatially resolved with changes to atomic structure by thermal annealing

Amorphous tantala (a-Ta2O5) is an important technological material that has wide ranging applications in electronics, optics and the biomedical industry. It is used as the high refractive index layers in the multi-layer dielectric mirror coatings in the latest generation of gravitational wave interferometers, as well as other precision interferometers. One of the current limitations in sensitivity of gravitational wave detectors is Brownian thermal noise that arises from the tantala mirror coatings. Measurements have shown differences in mechanical loss of the mirror coatings, which is directly related to Brownian thermal noise, in response to thermal annealing. We utilise scanning electron diffraction to perform a modified version of Fluctuation Electron Microscopy (FEM) on Ion Beam Sputtered (IBS) amorphous tantala coatings, definitively showing an increase in the medium range order (MRO), as determined from the variance between the diffraction patterns in the scan, due to thermal annealing at increasing temperatures. Moreover, we employ Virtual Dark-Field Imaging (VDFi) to spatially resolve the FEM signal, enabling investigation of the persistence of the fragments responsible for the medium range order, as well as the extent of the ordering over nm length scales, and show ordered patches larger than 5nm in the highest temperature annealed sample. These structural changes directly correlate with the observed changes in mechanical loss.

Modal spectrum engineering of multilayer optical waveguides: towards digital vertical multimode interference couplers

A new technique is proposed for improving the coupling efficiency of vertical multimode interference couplers. The technique replaces conventional multimode waveguides with multilayer waveguides (MLWs) in the design of these couplers. The separation between the high refractive index layers of the MLWs is modulated to fit the propagation constants of their guided modes to the ideal parabolic profile required for perfect coupling. Numerical computations of the proposed couplers demonstrate the ability to transfer 86 % of optical power between 220-nm thick SOI waveguides at a vertical separation of 2.3 μm.

Metalorganic chemical vapor phase epitaxy of narrow-band distributed Bragg reflectors realized by GaN:Ge modulation doping

We report on metalorganic vapor phase epitaxy (MOVPE) of distributed Bragg reflectors (DBR) applying a periodic modulation of the GaN doping concentration only. The doping modulation changes the refractive index of GaN via the Burstein-Moss-effect. MOVPE growth of highly doped GaN:Ge and modulation of the dopant concentration by at least two orders of magnitude within few nanometers is required to achieve a refractive index contrast of 2–3%. Such modulation characteristic is achieved despite the presence of Ge memory effects and incorporation delay. We realized DBRs with up to 100 layer pairs by combining GaN:Ge with a nominal doping concentration of 1.6×1020cm−3 as low-refractive index material with unintentionally doped GaN as high-refractive index layer. Scanning transmission electron microscope images reveal DBR structures with abrupt interfaces and homogenous layer thicknesses in lateral and vertical direction. Reflectance measurements of DBRs designed for the blue and near UV-spectral region show a narrow stopband with a maximum reflectivity of 85% at 418nm and even 95% at 370nm. InGaN/GaN multi-quantum well structures grown on top of such DBRs exhibit narrow emission spectra with linewidths below 3nm and significantly increased emission intensity.