High Redox Potential Substrates Research Articles

Structural insights at acidic pH of dye-decolorizing peroxidase from Bacillus subtilis.

Dye-decolorizing peroxidases (DyPs), a type of heme-containing oxidoreductase enzymes, catalyze the peroxide-dependent oxidation of various industrial dyes as well as lignin and lignin model compounds. In our previous work, we have recently reported the crystal structures of class A-type DyP from Bacillus subtilis at pH7.0 (BsDyP7), exposing the location of three binding sites for small substrates and high redox-potential substrates. The biochemical studies revealed the optimum acidic pH for enzyme activity. In the present study, the crystal structure of BsDyP at acidic pH (BsDyP4) reveals two-monomer units stabilized by intermolecular salt bridges and a hydrogen bond network in a homo-dimeric unit. Based on the monomeric structural comparison of BsDyP4 and BsDyP7, minor differences were observed in the loop regions, that is, LI (Ala64-Gln71), LII (Glu96-Lys108), LIII (Pro117-Leu124), and LIV (Leu295-Asp303). Despite these differences, BsDyP4 adopts similar heme architecture as well as three substrate-binding sites to BsDyP7. In BsDyP4, a shift in Asp187, heme pocket residue discloses the plausible reason for optimal acidic pH for BsDyP activity. This study provides insight into the structural changes in BsDyP at acidic pH, where BsDyP is biologically active.

Designed High-Redox Potential Laccases Exhibit High Functional Diversity.

White-rot fungi secrete an impressive repertoire of high-redox potential laccases (HRPLs) and peroxidases for efficient oxidation and utilization of lignin. Laccases are attractive enzymes for the chemical industry due to their broad substrate range and low environmental impact. Since expression of functional recombinant HRPLs is challenging, however, iterative-directed evolution protocols have been applied to improve their expression, activity, and stability. We implement a rational, stabilize-and-diversify strategy to two HRPLs that we could not functionally express. First, we use the PROSS stability-design algorithm to allow functional expression in yeast. Second, we use the stabilized enzymes as starting points for FuncLib active-site design to improve their activity and substrate diversity. Four of the FuncLib-designed HRPLs and their PROSS progenitor exhibit substantial diversity in reactivity profiles against high-redox potential substrates, including lignin monomers. Combinations of 3-4 subtle mutations that change the polarity, solvation, and sterics of the substrate-oxidation site result in orders of magnitude changes in reactivity profiles. These stable and versatile HRPLs are a step toward generating an effective lignin-degrading consortium of enzymes that can be secreted from yeast. The stabilize-and-diversify strategy can be applied to other challenging enzyme families to study and expand the utility of natural enzymes.

Agaricales Mushroom Lignin Peroxidase: From Structure-Function to Degradative Capabilities.

Lignin biodegradation has been extensively studied in white-rot fungi, which largely belong to order Polyporales. Among the enzymes that wood-rotting polypores secrete, lignin peroxidases (LiPs) have been labeled as the most efficient. Here, we characterize a similar enzyme (ApeLiP) from a fungus of the order Agaricales (with ~13,000 described species), the soil-inhabiting mushroom Agrocybe pediades. X-ray crystallography revealed that ApeLiP is structurally related to Polyporales LiPs, with a conserved heme-pocket and a solvent-exposed tryptophan. Its biochemical characterization shows that ApeLiP can oxidize both phenolic and non-phenolic lignin model-compounds, as well as different dyes. Moreover, using stopped-flow rapid spectrophotometry and 2D-NMR, we demonstrate that ApeLiP can also act on real lignin. Characterization of a variant lacking the above tryptophan residue shows that this is the oxidation site for lignin and other high redox-potential substrates, and also plays a role in phenolic substrate oxidation. The reduction potentials of the catalytic-cycle intermediates were estimated by stopped-flow in equilibrium reactions, showing similar activation by H2O2, but a lower potential for the rate-limiting step (compound-II reduction) compared to other LiPs. Unexpectedly, ApeLiP was stable from acidic to basic pH, a relevant feature for application considering its different optima for oxidation of phenolic and nonphenolic compounds.

Electrochemistry of a high redox potential laccase obtained by computer-guided mutagenesis combined with directed evolution

Electrochemical characterization of the GreeDo variant of a high redox potential fungal laccase obtained by laboratory evolution together with computer-guided mutagenesis, in comparison to its parental variety (the OB-1 mutant), is presented. Both laccases, when immobilized on graphite electrodes either by direct physical adsorption or covalently attached via gold nanoparticles, were capable of both non-mediated and mediator-based bioelectroreduction of molecular oxygen at low overpotentials. GreeDo exhibited higher open circuit potential values and onset potentials for oxygen bioelectroreduction compared to OB-1. However, even though in homogeneous catalysis GreeDo outperforms OB-1 in terms of turnover numbers and catalytic efficiency, when exposed to high redox potential substrates, direct electron transfer based bioelectrocatalytic currents of GreeDo and OB-1 modified electrodes were similar. High operational stability of freely diffusing GreeDo and also the immobilized enzyme in the acidic electrolyte was registered, in agreement with high storage stability of GreeDo in acidic solutions.

A highly stable laccase obtained by swapping the second cupredoxin domain

The robustness of a high-redox potential laccase has been enhanced by swapping its second cupredoxin domain with that from another fungal laccase, which introduced a pool of neutral mutations in the protein sequence without affecting enzyme functionality. The new laccase showed outstanding stability to temperature, pH (2–9) and to organic solvents, while maintaining the ability to oxidize high-redox potential substrates. By engineering the signal peptide, enzyme secretion levels in Saccharomyces cerevisiae were increased, which allowed to purify the engineered enzyme for further characterization. The purified domain-swap laccase presented higher activity in the presence of ethanol or methanol, superior half-lives at 50–70 °C, improved stability at acidic pH, and similar catalytic efficiency for DMP albeit a lower one for ABTS (due to a shift in optimum pH). A new N-glycosylation site and a putative new surface salt-bridge were evaluated as possible determinants for the improved stability by site-directed mutagenesis. Although neither seemed to be strictly responsible for the improved thermostability, the new salt bridge was found to notably contribute to the high stability of the swapped enzyme in a broad pH range. Finally, the application potential of the new laccase was demonstrated with the enzymatic treatment of kraft lignin, an industrially relevant lignin stream, at high temperature, neutral pH and short incubation times.

Comprehensive investigation of a dye-decolorizing peroxidase and a manganese peroxidase from Irpex lacteus F17, a lignin-degrading basidiomycete

Irpex lacteus F17 is well-known for its ability to degrade recalcitrant aromatic pollutants, which mainly results from the action of the manganese peroxidase (MnP) that it is able to produce. Recently, the genome sequencing and annotation of this strain provided comprehensive picture of the ligninolytic peroxidase gene family. In addition to revealing the presence of 13 MnPs, genes for five dye-decolorizing peroxidases (DyPs) were also discovered in the I. lacteus F17 genome, which are unrelated to the fungal class II peroxidases. In the present study, amino acid sequences of five DyPs and 13 MnPs, representing two different families of heme peroxidases, were analyzed. Of these, two enzymes, a DyP (Il-DyP4) and a MnP (Il-MnP6) were expressed respectively in Escherichia coli, and were characterized by comparing their molecular models, substrate specificities, and catalytic features. The results showed that Il-DyP4 possessed a higher catalytic efficiency for some representative substrates, and a stronger decolorizing ability to a wide range of synthetic dyes in acidic conditions. Based on electrochemical measurements, Il-DyP4 was found to have a high redox potential of 27 mV at pH 3.5, which was superior to that of Il-MnP6 (− 75 mV), thereby contributing to its ability to oxidize high redox potential substrates, such as veratryl alcohol and polymeric dye Poly R-478. The results highlighted the potential of Il-DyP4 for use in industrial and environmental applications.

A dye-decolorizing peroxidase from Bacillus subtilis exhibiting substrate-dependent optimum temperature for dyes and β-ether lignin dimer.

In the biorefinery using lignocellulosic biomass as feedstock, pretreatment to breakdown or loosen lignin is important step and various approaches have been conducted. For biological pretreatment, we screened Bacillus subtilis KCTC2023 as a potential lignin-degrading bacterium based on veratryl alcohol (VA) oxidation test and the putative heme-containing dye-decolorizing peroxidase was found in the genome of B. subtilis KCTC2023. The peroxidase from B. subtilis KCTC2023 (BsDyP) was capable of oxidizing various substrates and atypically exhibits substrate-dependent optimum temperature: 30°C for dyes (Reactive Blue19 and Reactive Black5) and 50°C for high redox potential substrates (2,2′-azino-bis(3-ethylbenzothiazoline-6-sulphonic acid [ABTS], VA, and veratryl glycerol-β-guaiacyl ether [VGE]) over +1.0 V vs. normal hydrogen electrode. At 50°C, optimum temperature for high redox potential substrates, BsDyP not only showed the highest VA oxidation activity (0.13 Umg−1) among the previously reported bacterial peroxidases but also successfully achieved VGE decomposition by cleaving Cα-Cβ bond in the absence of any oxidative mediator with a specific activity of 0.086 Umg−1 and a conversion rate of 53.5%. Based on our results, BsDyP was identified as the first bacterial peroxidase capable of oxidizing high redox potential lignin-related model compounds, especially VGE, revealing a previously unknown versatility of lignin degrading biocatalyst in nature.

Structural and redox properties of the small laccase Ssl1 from Streptomyces sviceus

Laccases (EC 1.10.3.2) are members of the multicopper oxidase family. They oxidize diverse electron-rich substrates through electron abstraction by the type 1 copper ion in the enzyme active site. Abstracted electrons are transferred to the trinuclear copper cluster, where molecular oxygen serves as final acceptor and is reduced to water. Laccase activity is assumed to depend on the redox potential of its type 1 copper ion. Whereas numerous studies have been undertaken to elucidate the determinants of the redox potential of type 1 copper ions in one-domain cupredoxins and in three-domain laccases, such experimental investigations are lacking for recently described, small, two-domain laccases. In this work, the crystal structure of the small laccase Ssl1 from Streptomyces sviceus was solved, and the positions that might influence the redox potential of Ssl1 were depicted. On the basis of this knowledge, several Ssl1 variants were constructed with an increase in redox potential of 16-81 mV, from 375 mV to 391-456 mV. Mutation of residues in close proximity to the type 1 copper center resulted in a predicted increase in the redox potential of the copper center; however, there was a reduced specific activity for the oxidation of 2,6-dimethoxyphenol, which has a relatively low redox potential. Mutations more distant to the type 1 copper also led to an increased redox potential of the copper center, and resulted in variants able to oxidize the high redox potential substrates 1,2-dihydroxyanthraquinone-3-sulfonic acid (Alizarin Red S) and indigo carmine more efficiently than wild-type Ssl1. The atomic coordinates of the structure of Ssl1 laccase from Streptomyces sviceus and structure factors have been deposited in the RCSB Protein Data Bank (4M3H) STRUCTURED DIGITAL ABSTRACT: •Ssl1 and Ssl1 bind by x-ray crystallography (View interaction).

Comparative genomics of Ceriporiopsis subvermispora and Phanerochaete chrysosporium provide insight into selective ligninolysis

Efficient lignin depolymerization is unique to the wood decay basidiomycetes, collectively referred to as white rot fungi. Phanerochaete chrysosporium simultaneously degrades lignin and cellulose, whereas the closely related species, Ceriporiopsis subvermispora, also depolymerizes lignin but may do so with relatively little cellulose degradation. To investigate the basis for selective ligninolysis, we conducted comparative genome analysis of C. subvermispora and P. chrysosporium. Genes encoding manganese peroxidase numbered 13 and five in C. subvermispora and P. chrysosporium, respectively. In addition, the C. subvermispora genome contains at least seven genes predicted to encode laccases, whereas the P. chrysosporium genome contains none. We also observed expansion of the number of C. subvermispora desaturase-encoding genes putatively involved in lipid metabolism. Microarray-based transcriptome analysis showed substantial up-regulation of several desaturase and MnP genes in wood-containing medium. MS identified MnP proteins in C. subvermispora culture filtrates, but none in P. chrysosporium cultures. These results support the importance of MnP and a lignin degradation mechanism whereby cleavage of the dominant nonphenolic structures is mediated by lipid peroxidation products. Two C. subvermispora genes were predicted to encode peroxidases structurally similar to P. chrysosporium lignin peroxidase and, following heterologous expression in Escherichia coli, the enzymes were shown to oxidize high redox potential substrates, but not Mn(2+). Apart from oxidative lignin degradation, we also examined cellulolytic and hemicellulolytic systems in both fungi. In summary, the C. subvermispora genetic inventory and expression patterns exhibit increased oxidoreductase potential and diminished cellulolytic capability relative to P. chrysosporium.

A heme peroxidase of the ascomyceteous lichen Leptogium saturninum oxidizes high-redox potential substrates

Lichens belonging to the order Peltigerales display strong activity of multi-copper oxidases (e.g. tyrosinase) as well as heme-containing peroxidases. The lichen peroxidase was purified to homogeneity from the thallus of Leptogium saturninum ( LsaPOX) by fast protein liquid chromatography and then partially characterized. The oligomeric protein occurs as both 79 kDa dimeric and 42 kDa monomeric forms, and displayed broad substrate specificity. In addition to an ability to oxidize classic peroxidase substrates (e.g. 2,6-dimethoxyphenol), the enzyme could convert recalcitrant compounds such as synthetic dyes (e.g. Azure B and Reactive Blue 5), 4-nitrophenol and non-phenolic methoxylated aromatics (e.g. veratryl alcohol). Comparing LsaPOX with a basidiomycete dye-decolorizing (DyP)-type peroxidase from Auricularia auricula-judae showed that the lichen enzyme has a high-redox potential, with oxidation capabilities ranging between those of known plant and fungal peroxidases. Internal peptide fragments show homology (up to 60%) with putative proteins from free-living ascomycetes (e.g. Penicillium marneffei and Neosartorya fischeri), but not to sequences of algal or cyanobacterial peptides or to known fungal, bacterial or plant peroxidases. LsaPOX is the first heme peroxidase purified from an ascomyceteous lichen that may help the organism to successfully exploit the extreme micro-environments in which they often grow.