High Reaction Activity Research Articles

Internal Electron-Donation Allocation Design for Intrinsic Solubilization of Lithium Nitrate in Ester Electrolyte for Stable Lithium Metal Batteries.

Lithium metal batteries (LMBs) have become a hot topic in the research of next-generation advanced battery technology due to their high specific energy. However, the high reaction activity between lithium metal and electrolyte is considered one of the key bottlenecks limiting large-scale applications of LMBs. As a classic electrolyte additive, LiNO3 significantly improves the stability of lithium metal in ether-based electrolytes. However, its solubility in carbonate-based electrolytes widely used in lithium-ion batteries is extremely low, and its protective effect on lithium metal is limited, which has become a key obstacle to the commercial application of lithium metal batteries. Here, we enhanced the local negative charge density of carbonyl oxygen atoms in carbonate molecules by introducing electron donors, making it easier for them to coordinate with Li+, thereby weakening the interaction between Li+ and NO3-, and significantly increasing the solubility of LiNO3 in ester electrolytes. The modified ester solvent promotes the derivatization and decomposition of salt anions, leading to the formation of a dense SEI layer rich in LiF and LiNxOy. This significantly improves the stability of lithium metal in ester-based electrolytes. The assembled Li||Li symmetric battery shows excellent cycling performance of over 4000 hours.

Heterointerfacial engineering of N,P-doped carbon nanosheets supported Co/Co2P nanoparticles for boosting oxygen reduction and oxygen evolution reactions towards rechargeable Zn-air battery

Transition metal phosphides (TMPs) with high electrocatalytic activity for the oxygen evolution reaction (OER) are reckoned as a substitution of precious group metals catalysts in rechargeable Zn-air battery. In this work, Co/Co2P heterojunction nanoparticles supported N,P-doped carbon nanosheets (Co/Co2P@NPCNS) were designed and prepared via a facile one-step molten salt-assisted pyrolysis process. Density function theory calculations reveal that the heterogeneous interactions of Co/Co2P effectively enhance the bifunctional electrocatalytic activity for oxygen reduction reaction (ORR) and OER. The synergistic interaction between the Co/Co2P heterojunction nanoparticles with highly exposed active sites and excellent catalytic activity and the two-dimensional doped carbon nanosheets with high conductivity contributes to Co/Co2P@NPCNS exhibiting preeminent bifunctional ORR/OER activity and stability with a high half-wave potential for ORR (0.87 V), a low overpotential for OER (302 mV at 10 mA cm−2) and a low potential gap (0.66 V). The homemade rechargeable Zn-air battery performs high peak power density (187 mW cm−2) and exceptional endurance. This heterogeneous interface tactic of integrating TMPs with heteroatom-doped carbon materials may shed light on the research and development of non-precious metal electrocatalysts.

Cuboidal molybdenum sulfur clusters as a platform to construct novel catalysts for propane dehydrogenation

Growing demand for short chain olefins such as propylene for plastic production drives the development of high performing catalysts for propane dehydrogenation (PDH). Here, a confinement strategy originating from metal-sulfur clusters was employed to fabricate defective MoPtSx phase via anchoring by coordinatively unsaturated Al sites present on alumina, followed by reduction under H2 flow at high temperature. This catalyst with a low Pt content exhibits great ability for C–H activation with high intrinsic activity and facile propylene desorption in PDH reaction. More importantly, the catalyst shows excellent stability during long-term tests with both stable conversion and selectivity. Through combined X-ray absorption spectroscopy, electron microscopy and electron paramagnetic resonance measurements it could be affirmed that interaction between isolated and electron-enriched Pt sites as well as their proximity to adjacent sulfur vacancies is vital for the first and second C–H bond activation, while suppressing C–C cleavage which otherwise lead to coking.

Aerobic Thiols Oxidative Coupling to Disulfides over Robust CoOx Nanoclusters Confined within Hierarchical Silicalite-1 Zeolite.

Disulfide is an important organic reagent and synthetic intermediate that is widely used in organic synthesis, polymers, and other fields, but its synthesis still suffers from many environmental pollution and economic problems. Here, we present an environmentally friendly and efficient base-free aerobic oxidative thiol coupling catalyzed by heterogeneous CoOx nanoclusters entrapped in hierarchical silicalite-1 zeolite, synthesized by combining silane pore expansion and metal coordination methods under hydrothermal conditions. It is confirmed that open hierarchical channels favor mass diffusion, and the chemical valence of Co species in CoOx/h-S-1-H is +2, which is different from that of Co3O4 particles in CoOx/h-S-1-I. CoOx nanoclusters, are strongly fixed in the channels of silicalite-1 zeolite via Co-O-Si bonds, which is of great importance for the high catalytic activity in both symmetrical and unsymmetrical oxidative thiol coupling reactions. After recycling experiments four times, the CoOx/h-S-1-H used has almost the same chemical state and the same distribution of Co(II) species as the fresh catalysts. Based on DFT calculations and inhibition experiments, the oxidative coupling of thiols undergoes a free radical mechanism in which Co(III) causes RS-H cleavage into RS· and H· species. Subsequently, two RS· radicals are coupled to disulfides, while H· radicals react with the O species to form H2O molecules. This work not only provides guidance on catalyst design and parameter optimization for oxidative thiol coupling but also advances the understanding of the aerobic oxidation mechanism.

Pd-Co Supported on Anodized Aluminium for VOCs Abatement: Reaction Mechanism, Kinetics and Applicability as Monolithic Catalyst

It has been found out that Pd-Co-based catalyst, supported on anodized aluminum, possesses very high activity in combustion reactions of C1–C6 alkanes and toluene. The catalyst characterization has been made by N2-pysisorption, XRD, SEM, XPS, FTIR, TEM, and EPR methods. In view of the great interest, methane combustion was investigated in detail. It is ascertained that the complete oxidation of methane proceeds by dissociative adsorption on PdO and formation of hydroxyl and methyl groups, the former being highly reactive, and it undergoes further reaction to oxygen-containing intermediates, whereupon HCHO is one of them. The presence of Co2+ cations promotes greatly oxygen adsorption. The dissociative adsorption is favored on neighboring Co2+ cations, leading to the formation of bridging peroxides. Further, the oxygen dissociates on the nearest Pd2+ cations. According to the results from the experimental data, instrumental methods, and the observed kinetics and DFT model calculations, it can be concluded that the reaction pathway over Pd+Co/anodic alumina support (AAS) catalyst proceeds most probably through Mars–van Krevelen. The obtained data on the kinetics were used for simulation of the methane combustion in a full-scale adiabatic reactor.

Hollow Nanobox‐Shaped Cu2‐xS@ZnxCd1‐xS Heterojunction by Light Multireflection with Z‐Scheme Mechanism for Enhanced Photocatalytic Hydrogen Production

AbstractAchieving efficient spatial photoinduced charge separation and light utilization for improving the high photocatalytic activity is still a major obstacle. Here, a Cu2‐xS@ZnxCd1‐xS (Cu2‐xS@ZnCdS) heterojunction is reported featuring a distinctive core–shell hollow nanobox structure. The Cu2‐xS@ZnxCd1‐xS exhibits high photocatalytic activity in hydrogen evolution reaction (HER) at the rate of 8175 µmol∙g−1∙h−1 under visible light irradiation, outperforming pristine ZnCdS nanoparticles and Cu2‐xS hollow nanoboxes. The remarkable activity and outstanding stability of Cu2‐x@ZnCdS are attributed to the development of robust interfacial electric fields, and improved light multireflection absorption efficiency as well as the Z‐scheme mechanism. The electron paramagnetic resonance (EPR) and in situ X‐ray photoelectron spectroscopy (XPS) measurements gave the direct evidence of the formation of the Z‐scheme, which maintained the high redox potentials of each ZnCdS and Cu2‐xS. This study gives the guideline for the design of heterojunction with the Z‐scheme mechanism, leading to the high photocatalytic performance and remarkable stability.

Self-Reconstruction Induced Electronic Metal-Support Interaction for Modulated Cu+ Sites on TiO2 Nanofibers in Electrocatalytic Nitrate Conversion.

The Cu+ active sites have gained great attention in electrochemical nitrate reduction, offering a highly promising method for nitrate removal from water bodies. However, challenges arise from the instability of the Cu+ state and microscopic structure over prolonged operation, limiting the selectivity and durability of Cu+-based electrodes. Herein, a self-reconstructed Cu2O/TiO2 nanofibers (Cu2O/TiO2 NFs) catalyst, demonstrating exceptional stability over 50 cycles (12 h per cycle), a high NO3 --N removal rate of 90.2%, and N2 selectivity of 98.7% is reported. The in situ electrochemical reduction contributes to the self-reconstruction of Cu2O/TiO2 nanofibers with stabilized Cu+ sites via the electronic metal-support interaction between TiO2 substrates, as evidenced by in situ characterizations and theoretical simulations. Additionally, density functional theory (DFT) calculations also indicate that the well-retained Cu+ sites enhance catalytic capability by inhibiting the hydrogen evolution reaction and optimizing the binding energy of *NO on the Cu2O/TiO2 NFs heterostructure surface. This work proposes an effective strategy for preserving low-valence-state Cu-based catalysts with high intrinsic activity for nitrate reduction reaction (NO3RR), thereby advancing the prospects for sustainable nitrate remediation technologies.

Flexible PET/Carbon/NiFe‐LDH Electrode for Oxygen Evolution Reaction in Water‐Splitting

AbstractThe development of low‐cost, readily scalable catalytic systems for green hydrogen production is crucial for diverse research and industrial applications. This work demonstrates the facile coupling of carbon/NiFe‐layered double hydroxide (LDH) onto flexible polyethylene terephthalate (PET) substrates deposited by blade coating and spray coating techniques. These low‐temperature solution processes enable high‐throughput electrode fabrication. The resulting carbon electrode exhibits sheet resistance of 25 Ω sq−1, comparable to other state‐of‐the‐art works, and displays excellent adhesion to the substrate and catalyst layer, thereby ensuring system stability. Remarkably, the developed electrode exhibits high catalytic activity for the oxygen evolution reaction (OER), achieving an overpotential of 215.9 and 267.4 mV at 10 mA cm−2 in rigid and flexible substrates respectively, and maintaining its performance even at 10 mA cm−2 for 24 h. This work highlights the potential of this methodology for producing readily transportable, flexible electrocatalytic systems with exceptional performance and minimal surface treatment of the substrate. Additionally, the use of low‐cost, readily recyclable PET plastic aligns with the principles of circular economy, promoting the integration of this platform into both research and industrial environments.

Electrochemical and electrocatalytic properties of hemihexaphyrazine and its trinuclear cobalt complex

The electrochemical and electrocatalytic properties of hemihexaphyrazine and its trinuclear cobalt complex were studied by cyclic voltammetry. The possibility of detecting cationic and anionic forms of compounds in the process of polarization of electrodes in the region of potentials 0.5 ÷ -1.5 V has been established. It is shown that the synthesized cobalt complex has a sufficiently high catalytic activity in the oxygen reduction reaction in an alkaline solution.

Boosting OER activity of Fe-N Moieties via Ni induced d-Orbital Tailoring for durable rechargeable Zn-Air batteries

Fe-N-C-based catalysts are considered the most promising Pt candidates due to their high oxygen reduction reaction (ORR) activity and low cost, whereas their oxygen evolution reaction (OER) performance is extremely poor due to the sluggish O-O coupling process, which hampers the practical application of rechargeable zinc-air batteries. Here, we in situ infiltrate Ni and Fe ions into metal triazolidine (MET)-derived N-doped porous carbon via a microporous confinement-pyrolysis strategy to enhance the OER activity of the Fe-N sites. The introduction of Ni induced the electronic delocalization of Fe atoms at the Fe-N center, which lowered the adsorption energy barriers for the decisive velocity step (O*→OOH*), thus accelerating the O-O bond coupling and OER kinetics. In addition, the preferential formation of NiOOH at high OER potentials ensures the catalytic stability of zinc-air batteries by trapping Fe ions escaping from carbon corrosion to form FeOOH. The optimized catalyst (FeNi-NC) has an overpotential of only 351 mV at a current density of 50 mA cm−2 under alkaline conditions. More importantly, the assembled ZABs can be stably charged and discharged for more than 500 h at 10 mA cm−2, demonstrating excellent battery charging and discharging stability. This work shows the great potential of strong electronic interactions between polymetals to improve Fe-N-C catalysts.

Trace RuO2 nanoparticles loaded nickel-coated multi-walled carbon nanotubes to boost hydrogen evolution reaction under acidic and alkaline media

Developing low-cost catalysts with high activity for the Hydrogen Evolution Reaction (HER) is a main challenge to reduce the dependence on precious metals while maintaining the catalytic activity. In this study, nickel-plated multi-walled carbon nanotubes (Ni-MWCNTs) with a large number of active sites were selected, and Ni-MWCNTs electrocatalysts loaded with trace amounts of RuO2 nanoparticles were prepared by annealing treatment, which exhibited excellent HER performances in both acidic and alkaline media. The RuO2 nanoparticles loaded nickel-coated multi-walled carbon nanotubes (RuO2@Ni-MWCNTs) had a small electrochemical impedance spectrum (EIS) and a large electrochemically active surface area (ECSA). Notably, RuO2@Ni-MWCNTs with less than 1 % Ru content exhibited excellent catalytic activities in both acidic and alkaline solutions. The results showed that the overpotentials of RuO2@Ni-MWCNTs were 20.2 mV (alkaline) and 73.7 mV (acidic), respectively. After stabilization at 20 mA cm−2 for 90 h, the evaluation results showed that RuO2@Ni-MWCNTs could maintain their catalytic efficiency without significant degradation.

The Development of Uniform-Sized Pt-Based Binary Alloy Electrocatalysts for ORR in Polymer Electrolyte Fuel Cells

Developing a highly efficient and durable reduced platinum metal (PtM) alloy catalyst with high oxygen reduction reaction (ORR)activity for polymer electrolyte fuel cells (PEFCs) is of significant interest. In this study, platinum-iron (PtFe), platinum-nickel (PtNi), and platinum-cobalt (PtCo) alloys were prepared with an average diameter of ca. 3 nm, uniformly dispersed on a high surface area carbon. The ORR activity of the prepared PtM/C catalysts was investigated under both RDE and MEA conditions. The resulting PtM/C catalysts demonstrated improved I-V cell performance at low-current density (LCD) and high-current density (HCD) regions. These findings suggest that high ORR activity and enhanced durability can be achieved through the formation of uniform Pt skin with higher electrochemical surface area (ECSA).

Cavity-Based Discovery of New Fatty Acid Photodecarboxylases.

Light-dependent fatty acid photodecarboxylases (FAPs) hold significant potential for biotechnology, due to their capability to produce alka(e)nes directly from the corresponding (un)saturated natural fatty acids requiring light as the only reagent. This study expands the family of FAPs through cavity-based enzyme discovery methods. Thirty enzyme candidates with potential photodecarboxylation activity were identified by matching the cavities of four related template structures against the Protein Data Bank's flavoproteins, a library of proteins identified via the Foldseek Search Server, and homology models of sequences resulting from BLAST. Subsequent docking experiments narrowed this library to ten promising enzymes, which were expressed and assessed in vitro, identifying four photodecarboxylases. Out of these enzymes, the GMC oxidoreductase from Coccomyxa sp. Obi (CoFAP) was characterized in detail, which revealed high activity in the decarboxylation reactions of palmitic acid and octanoic acid and a broad pH tolerance (pH 6.5-9.5).

Scalable Solid-State Synthesis of Carbon-Supported Ir Electrocatalysts for Acidic Oxygen Evolution Reaction: Exploring the Structure-Activity Relationship.

Enhancing iridium (Ir)-based electrocatalysts to achieve high activity and robust durability for the oxygen evolution reaction (OER) in acidic environments has been an ongoing mission in the commercialization of proton exchange membrane (PEM) electrolyzers. In this study, we present the synthesis of carbon-supported Ir nanoparticles (NPs) using a modified impregnation method followed by solid-state reduction, with Ir loadings of 20 and 40 wt % on carbon. Among the catalysts, the sample with an Ir loading of 20 wt % synthesized at 1000 °C with a heating rate of 300 °C/h demonstrated the highest mass-normalized OER performance of 1209 A gIr-1 and an OER current retention of 80% after 1000 cycles of cyclic voltammetry (CV). High-resolution STEM images confirmed the uniform dispersion of NPs, with diameters of 1.6 ± 0.4 nm across the support. XPS analysis revealed that the C-O and C═O peaks shifted slightly toward higher binding energies for the best-performing catalyst. In comparison, the metallic Ir state shifted toward lower binding energies compared to other samples. This suggests electron transfer from the carbon support to the Ir NPs, indicating a potential interaction between the catalyst and the support. This work underscores the strong potential of the solid-state method for the scalable synthesis of supported Ir catalysts.

One-step microwave-assisted synthesis of metal-free heteroatom-doped carbon catalyst for H2O2 electrosynthesis

This study reports on a one-step conversion of polyaniline into a metal-free heteroatom-doped carbon electrocatalyst through microwave heating. A high surface area carbonaceous structure forms after a total synthesis time of only 140 s, with the presence of nitrogen and oxygen functional groups, as confirmed by thorough spectroscopic analysis. This catalyst exhibits high activity (onset potential of 0.73 V vs. RHE), selectivity (82 %), and stability (over a 7.5-hour test period) for the electrochemical oxygen reduction reaction towards hydrogen peroxide in alkaline media. Microwave synthesis reduces heating time by 29-fold and energy consumption by 77-fold, while producing materials with high electrocatalytic efficiency comparable to those conventionally prepared at 700°C. The microwave and the conventionally synthesized heteroatom-doped carbon catalysts show similar electrochemical performances, which can be attributed to the presence of nearly identical nitrogen functional groups and surface area in the two samples. In contrast, the microwave and conventionally synthesized samples exhibit significant variations in their oxygen functional groups. These results suggest that nitrogen functional groups are the main active sites for alkaline hydrogen peroxide formation, while oxygen functional groups play a minor role in the catalytic activity. Our work brings a solid contribution to the debate regarding the active centers for hydrogen peroxide formation.

Enhanced electrolytic production of hypochlorous acid using phosphorus-modified carbon felt electrodes: A study in disinfectant synthesis

In this study, we fabricated phosphorus-modified carbon felt electrode anodes for chloride oxidation in saline solutions to produce HClO via electrocatalysis, forming a compound fungicide saline applicable for debridement and disinfection. A low-cost phosphorus-modified carbon felt electrode (P@CF) with high chlorine evolution reaction activity was synthesized to address the reduced efficiency of CER and the solution's pH increase. Heteroatoms P and O were introduced into the carbon felt by phosphoric acid activation followed by heat treatment. The maximum active chlorine concentration on the P@CF electrode could reach 616.8 mg/L in 60 min under the optimal synthesis conditions of a phosphoric acid mass fraction of 30%, a phosphoric acid impregnation time of 3 h, and a heat treatment temperature of 300 °C. The active chlorine concentration was 1.8 times higher on the P@CF electrode compared to the original carbon felt electrode. The optimal reaction conditions for the generation of active chlorine were as follows: salt concentration of 9 g/L, voltage of 7 V, and electrode spacing of 2 cm as verified by response surfaces. This electrolysis reaction follows one-stage reaction kinetics. Subsequently, the disinfection efficacy of the produced disinfectants was examined. The prepared disinfectant was also compared to a commercially available hypochlorite disinfectant, showing similar disinfection effects on E. coli for both.

Extremely Active and Robust Ir−Mn Dual‐Atom Electrocatalyst for Oxygen Evolution Reaction by Oxygen‐Oxygen Radical Coupling Mechanism

AbstractA novel Ir−Mn dual‐atom electrocatalyst is synthesized by a facile ion‐exchange method by incorporating Ir in SrMnO3, which yields an extremely high activity and stability for the oxygen evolution reaction (OER). The ion exchange process occurs in a self‐limitation way, which favors the formation of Ir−Mn dual‐atom in the IrMnO9 unit. The incorporation of Ir modulates the electronic structure of both Ir and Mn, thereby resulting in a shorter distance of the Ir−Mn dual‐atom (2.41 Å) than the Mn−Mn dual‐atom (2.49 Å). The modulated Ir−Mn dual‐atom enables the same spin direction O (↑) of the adsorbed *O intermediates, thus facilitating the direct coupling of the two adsorbed *O intermediates to release O2 via the oxygen‐oxygen radical coupling mechanism. Electrochemical tests reveal that the Ir‐SrMnO3 exhibits a superior OER's activity with a low overpotential of 207 mV at 10 mA cm−2 and achieves a mass specific activity of 1100 A gIr−1 at 1.5 V. The proton‐exchange‐membrane water electrolyzer with the Ir‐SrMnO3 catalyst exhibits a low electrolysis voltage of 1.63 V at 1.0 A cm−2 and a stable 2000‐h operation with a decay of only 15 μV h−1 at 0.5 A cm−2.

Proline-Functionalized Magnetic Nanoparticles as Highly Performing Asymmetric Catalysts.

Amino acids have a crucial role in the field of asymmetric organocatalysis for the production of chiral compounds with high added value and specific biological activity. In particular, proline offers high activity and stereoselectivity for catalyzing aldol reactions in organic solvents. However, proline-based catalysts often lack water-solubility, accessibility, catalytic performance, or recovery in aqueous media. This work reports the design of proline-functionalized poly(methyl methacrylate) (PMMA) nanoparticles with a magnetic core that offer high availability of chiral units in water and high recyclability. A proline-based copolymerizable surfactant is designed and integrated onto the surface of PMMA nanoparticles through a miniemulsion polymerization process without using additional surfactants. The miniemulsion technique allows the incorporation of magnetite to the system to create a magnetically separable catalyst. The chiral nanocatalyst presents a high diastereoselective catalytic activity for the intermolecular aldol reaction between p-nitrobenzaldehyde and cyclohexanone in water.

Reaction-induced unsaturated Mo oxycarbides afford highly active CO2 conversion catalysts.

Sustainable CO2 conversion is crucial in curbing excess emissions. Molybdenum carbide catalysts have demonstrated excellent performances for catalytic CO2 conversion, but harsh carburization syntheses and poor stabilities make studies challenging. Here an unsaturated Mo oxide (Mo17O47) shows a high activity for the reverse water-gas shift reaction, without carburization pretreatments, and remains stable for 2,000 h at 600 °C. Flame spray pyrolysis synthesis and Ir promoter facilitate the formation of Mo17O47 and its in situ carburization during reaction. The reaction-induced cubic α-MoC with unsaturated Mo oxycarbide (MoOxCy) on the surface serves as the active sites that are crucial for catalysis. Mechanistic studies indicate that the C atom in CO2 inserts itself in the vacancy between two Mo atoms, and releases CO by taking another C atom from the oxycarbide to regenerate the vacancy, following a carbon cycle pathway. The design of Mo catalysts with unsaturated oxycarbide active sites affords new territory for high-temperature applications and provides alternative pathways for CO2 conversion.

Inclusion Strategy for Constructing S/N Orbital Hybridization-Regulated sp3/sp2 Carbon toward Boost Electrocatalysis.

Metal-free carbon-based electrocatalysts have gained significant attention in the field of zinc-air batteries (ZABs) due to their affordability, good conductivity and chemical stability. However, unmodified carbon materials typically fall short in adsorbing and activating the substrates and intermediates involved in oxygen reduction reactions (ORR). Here, a metal-free carbon-based electrocatalyst with S atom p orbital hybrid modified N-sp3/sp2 carbon structure (C/NS) were prepared by cyclodextrins inclusion. The catalyst demonstrates impressive ORR activity (E1/2=0.885 V vs. RHE) and robust ZABs performance with a power density of 171.3 mW cm-2 and a specific capacity of 781.2 mAh g-1. Density functional theory (DFT) calculation reveals that S atom effectively regulates the charge distribution and p-band center of active site carbon atom in the N-sp3/sp2 carbon structure. This modification prompts the adsorption and dissociation of O2 and intermediates, resulting in higher reactive activity. This work provides a valuable and practical strategy for preparing cost-effective metal-free carbon-based electrocatalysts for ORR with high performance.