High Production Research Articles

A new integrated strategy for high purity pinolenic acid production from Pinus koraiensis Sieb. et Zucc seed oil and evaluation of its hypolipidemic activity in vivo

Pinolenic acid is a polyunsaturated fatty acid present only in Pinus koraiensis Sieb. et Zucc seed oil. In order to solve the structural instability problem of polyunsaturated fatty acids, pinolenic acid of P. koraiensis seed oil was effectively isolated and purified by the integrated strategy of ethyl esterification followed by urea inclusion for the first time. Under the optimal conditions after the Box-Benhnken Design experimental, ethyl pinolenate with high purity 94.95% could be obtained, and the average content of PNAEE can still reach 86.18%. Then ethyl pinolenate was characterized by Gas chromatography-mass spectrometry, Fourier transform infrared, and Nuclear magnetic resonance spectra, results showed that ethyl pinolenate was successfully prepared. In addition, the hypolipidemic activity of ethyl pinolenate had been tested in vivo and showed that ethyl pinolenate had obvious hypolipidemic activity. The new strategy for high purity ethyl pinolenate production from P. koraiensis seed oil possesses great potential in food healthy field in the future.

In-situ capture defects through molecule grafting assisted in coal-based hard carbon anode for sodium-ion batteries

Sodium-ion batteries is not essential but also potential to support energy storage system due to the low cost. It's worth noting that low price and high carbon production helps coal extraordinary promise as hard carbon precursor. However, low initial coulombic efficiency (ICE) and practical Na+ storage specific capacity barrier their application owing to lots of defects. Herein, a grafting method is proposed to decrease defects, introducing glucose with simple one step carbonization process. Utilizing the reaction between glucose and coal reduces the defects, which generates a high ICE with less irreversible sodium ion consumption. Meanwhile the expanded carbon layer spaces enable the fast sodium ions transfer, leading to an optimized sodium storage performance. The grafted glucose obviously decreases the defects during the carbonization process and contributes extra sodium storage capacity. The optimal CG0.1 exhibits higher reversible capacity of 293 mAh∙g−1 and ICE of 84 % than pristine coal pyrolytic carbon (250 mAh∙g−1 and 79 %). Besides, it also delivers outstanding capacity retention with 95.3 % and 95.8 % after 1000 cycles at 0.3 A∙g−1 (240 mAh∙g−1) and at 1 A∙g−1 (207 mAh∙g−1)

Investigating the chemical stability and thermal functionality of DMPT promoted TiO2 nanoparticles on unsaturated polyester resin

The incessant emergence of failures in mining roofs, along with escalating demands for high and sustainable roof support products such as resin anchor bolt capsules (resin), necessitates strengthening these elements. This study explores the transformative influence of Titanium oxide nanoparticles (TiO2) and its concentration on the chemical properties, stability, and thermal performance of polyester resin (UPE) nanocomposites. The investigation was carried out using Fourier-transform infrared (FTIR), Raman spectroscopy, and X-ray diffraction (XRD). Rheological behavior was assessed with a Brookfield viscometer, while thermal stability was examined via thermogravimetric analysis (TGA, DTG, and DTA). From the results obtained, the addition of nanoparticle TiO2 yielded a little significant change in the shift of the FTIR wavelength. However, substantial Raman peak disappearance from the peaks of the UPE neat compared to composites. The shift in Raman is associated with an increase in crystallinity due to TiO2 content. X-ray diffraction confirms the seamless presence of anatase TiO2 nanoparticles in the polyester resin matrix. The resin curing kinetics exhibit a 50-second reduction in the time to reach the exothermic peak when the nanomaterial content reaches 3% in TiO2. An increase in nanomaterial content leads to a shorter time to peak at a higher exothermic temperature, indicating improved resin cure rates. This study substantiates enhanced chemical and thermal stabilities with increasing nanomaterial content, affirming the positive impact of nanomaterial infusion on resin resilience and stability.

Farmland mulching and optimized irrigation increase water productivity and seed yield by regulating functional parameters of soybean (Glycine max L.) leaves

In both arid and semi-arid regions, adopting field mulching can effectively optimize soil moisture distribution, enhance crop yields, and improve water productivity. While acknowledging its advantages, field mulching seems insufficient for maintaining high crop productivity due to the increasing frequency of extreme weather. Furthermore, drought often coincides with critical crop growth stages, necessitating the implementation of agricultural irrigation to ensure normal crop growth. Accordingly, we conducted a three-year field experiment from 2021 to 2023 including three typical field mulching methods (no mulching, NM; straw mulching, SM; plastic film mulching, FM) and three supplementary irrigation strategies (irrigated at the branching stage (V4), W1; irrigated at the pod-filling stage (R2), W2; irrigated at both the V4 and R2 stage, W3). Throughout the entire growth period, we monitored soil moisture conditions for each treatment, measured leaf physiological parameters at crucial growth stages, and assessed soybean yields and water productivity (WP). Our findings indicated that, relative to SM and NM, FM maintains optimal soil moisture balance, augments chlorophyll content, and enhances photosynthesis, resulting in an average yield increase of 17.0% and 38.3% over three growing seasons. Additionally, supplementary irrigation also significantly affects the growth and seed yield of soybean. FMW2 achieved the higher seed yield (4307.5kgha-1, 3-year averaged), had insignificant difference with the highest seed yield of 4568.6kgha-1, both significantly higher than other treatments. Similarly, the leaf area index, chlorophyll content, net photosynthetic rate (Pn) and transpiration rate (Tr) also presented insignificant difference between FMW2 and FMW3, while WUEleaf (Pn/Tr) of FMW2 obviously higher than that of FMW3. As a result, FMW2 achieved the highest WP of 12.2kgha-1 mm-1 over the three growing seasons, compared to the three-year average of the other treatments, the increase ranges from 5.6% to 46.7%. In summary, the FMW2 treatment optimized water distribution to meet the water demands of soybeans during the reproductive growth stages, achieving a beneficial balance between soybean seed production and WP by regulating leaf functional parameters. Future research will explore more specific irrigation scheduling techniques (e.g., precision irrigation, deficit irrigation, and sensor-based irrigation management systems) while integrating innovative agricultural film materials (e.g., biodegradable films) to further enhance crop resilience and productivity under evolving climatic conditions.

Relações entre variáveis do maracujá amarelo e roxo

ABSTRACT Brazil is the world’s largest producer of passion fruit, with the species Passiflora edulis Sims (yellow and purple passion fruit) being the most popular commercially. Due to the great economic importance of this culture, seeking high productivity, phytotechnical quality, and maintenance of existing germplasms, among others, it is necessary to carry out studies of the most diverse types of this culture. In this crop, the use of multivariate techniques has increasingly driven studies on genetic differences between passion fruit species. Therefore, this research aimed to identify the variables that deserve greater emphasis in experiments with two commercial species of Passiflora: Passiflora edulis Sims f. edulis (purple passion fruit) and Passiflora edulis Sims (yellow passion fruit), verifying if the species differ from each other. For this purpose, principal component analysis, multivariate analysis of variance (MANOVA), and Hotelling’s T2 test were performed. The principal component analysis proved to be effective, allowing the removal of five variables for yellow passion fruit and six variables for purple passion fruit and yellow passion fruit present contrasting differences between them, being the explanatory variables for the purple passion fruit the external and internal color and for the yellow passion fruit length, diameter, and citric acid.

Nitrogen Supply from Soil Organic Matter: Predictors and Implications for Recommended Nitrogen Application Rates in Northern Highbush Blueberry

Nitrogen (N) management is a key component to maintaining high productivity of northern highbush blueberry (Vaccinium corymbosum L.) and nitrogen is often supplied by applying ammonium-based fertilizers. It can also be supplied through mineralization of soil organic matter (SOM), although the amount released by SOM is difficult to predict and not always considered in the development and implementation of N fertility programs. Laboratory and field experiments were conducted to estimate the timing and magnitude of net N mineralization from SOM throughout the growing season, identify soil properties that can be measured commercially and used to predict net N mineralization across a range of SOM, and determine whether N requirements for maximizing yield and fruit quality of blueberry vary across soils with different amounts of SOM. The laboratory experiment was conducted for 6 months using soil samples collected from 10 representative commercial blueberry fields in northwest Washington. The soils contained 2% to 42% soil organic carbon (SOC). The mean net N mineralization rates were fastest during the first 3 to 4 months of incubation, corresponding to the period during which N uptake reaches its maximum in blueberry. Results indicated that the soil total N may be a useful predictor of the N supply from SOM (6.34 ± 1.13 kg⋅ha−1 increase in net N mineralization with each 0.1% increase in total N), but there was substantial variability in the N supply that could not by explained by the total N (P < 0.001; r2 = 0.433). The field experiment was conducted from 2019 to 2021 and included four mature, regionally representative, commercial fields of ‘Duke’ blueberry. The fields contained 3% to 28% SOC and were each fertilized with low, medium (control), or high N rates, corresponding to 33 to 50, 67 to 84, or 102 to 118 kg⋅ha−1 N per year, respectively. Although soil inorganic N levels suggested that N mineralization was substantial at sites with higher SOM, sites with lower SOM did not require more fertilizer N than those with higher SOM. Under the conditions of this experiment, even the lowest N rates were sufficient to sustain production for at least 3 years at each site. The findings of this study indicate that SOM may be an important contributor to N fertility in managed blueberry systems, and that yield and fruit quality can be maintained across various N fertilizer rates, including at rates <50 kg⋅ha−1 N. However, the long-term impacts of reducing N application rates remain unclear, and future research should monitor long-term changes in plant health and soil fertility associated with reduced N applications across diverse soils and production systems.

A Mamdani fuzzy inference system with trapezoidal membership functions for investigating fishery production

Seas, marine ecosystems, and coastal regions are crucial components of our environment. Numerous scientific strategies have been adopted to boost fisheries and aquaculture productivity. This study proposes a fuzzy-logic-based model to produce fisheries in India, which ranks fourth worldwide for fisheries production. Five input variables, such as fish seed, export, post-harvesting, released fund, and temperature, are considered inputs, and the production of fisheries is taken as the output variable. A Mamdani-type fuzzy inference system with trapezoidal membership functions is prepared with 243 rules in the IF-THEN format. This mathematical model investigates the impacts of input parameters on the production of Indian fisheries. We fit the model with the real-world data and show that fish seed, export, released fund, and post-harvesting facilities positively impact fisheries production. However, a very high temperature is unsuitable for high production, even if all other parameters lie at their desired level.

BLDC Motor based Air Dessert Cooler

Abstract: This paper proposes a new position sensorless drive for brushless DC (BLDC) motors.Growing need for high productivity is placing new demands on mechanisms connected with electrical motors. The demand for low costBrushless DC (BLDC) motor has increased in industrial applications. A simple BLDC motor control algorithm forlow cost motor drive applications using general purpose microcontrollers has been created and presented in this paper. Proposed design will allow the user to rotate the motor either clockwise or counter clockwise direction. Dependingon the rotor position the sensor will give response to the controller circuit. Then the controller circuit will fix the direction of current following to the stator. The design controller circuit is also implemented. The overall design consists of microcontroller circuit, logic gates, switching devices (MOSFET/BJT), BLDC motor, sensors.

Literature review: Work music in reducing work stress

High productivity allows companies to produce goods and services at lower costs, so they can offer more competitive prices in the market. Productivity may experience a decline which can have a negative impact on organizational performance. Decreased productivity can be caused by prolonged work stress. This research aims to analyze the role of work music in reducing work stress. This research was carried out using the method literature review by determining inclusion and exclusion criteria using PICOS (Problem, Intervention, Comparison, Outcome, and Study design) from 7 articles that met the eligibility criteria, then data extraction was carried out by evaluating work music in reducing work stress. Based on the results of a systematic review conducted, it shows that the occupational safety and health program in the form of providing work music is able to increase worker productivity found in various types of work so that it can optimally increase the profits of the employing agency.

Improvements in fermentation and nutritive quality of elephant grass [Cenchrus purpureus (Schumach.) Morrone] silages: a review.

Elephant grass [Pennisetum purpureum Schumach. syn. Cenchrus purpureus (Schumach.) Morrone], also known as Napier grass and King grass, includes varieties Taiwán, Gigante, Merkerón, Maralfalfa, and others. The grass achieves high biomass production in tropical-subtropical, temperate, and arid areas. The high-water concentration of elephant grass suggests that ensiling could offer an alternative way to preserve the nutritional quality of the grass during storage, however, some considerations should be addressed because of the particularities of the grass. Ensiling elephant grass may produce adequate fermentation but could suffer effluent losses and subsequent losses of nutrients due to leaching. To improve fermentation and nutrient characteristics of elephant grass silages, several studies were conducted with the inclusion of additives. Lactic acid bacteria inocula have reduced pH and increased crude protein content of elephant grass silage, but aerobic stability of silages could be affected by the bacterial inoculation. There is limited information, however, on the potential of different silage inoculants to reduce growth of spoilage microorganisms during the aerobic phase of silage prepared with elephant grass. Exogenous fibrolytic enzymes also may improve elephant grass silage quality by enhancing microbial fiber-degradation with subsequent increase in lactic acid and its associated pH reduction. Another study approach to improve fermentation and nutritional quality of elephant grass silages involved the addition of different feeds at ensiling, including conventional feeds such corn, wheat, rice bran, and molasses or alternative feeds such as different dehydrated by-products obtained from the food industries of juice and jelly. In the manuscript, the presented scientific information shows the great potential of the different manipulations to improve the quality of elephant grass silages and with possible enhance of the economic profit and sustainability of livestock farming in the tropical areas.

Low-Coordinated Conductive ZnCu Metal-Organic Frameworks for Highly Selective H2O2 Electrosynthesis.

Direct electrosynthesis of hydrogen peroxide (H2O2) with high production rate and high selectivity through the two-electron oxygen reduction reaction (2e-ORR) offers a sustainable alternative to the energy-intensive anthraquinone technology but remains a challenge. Herein, a low-coordinated, 2Dconductive Zn/Cu metal-organic framework supported on hollow nanocube structures (ZnCu-MOF (H)) is rationally designed and synthesized. The as-prepared ZnCu-MOF (H) catalyst exhibits substantially boosted electrocatalytic kinetics, enhanced H2O2 selectivity, and ultra-high Faradaic efficiency for 2e-ORR process in both alkaline and neutral conditions. Electrochemical measurements, operando/quasi in situ spectroscopy, and theoretical calculation demonstrate that the introduction of Cu atoms with low-coordinated structures induces the transformation of active sites, resulting in the beneficial electron transfer and the optimized energy barrier, thereby improving the electrocatalytic activity and selectivity.

Selenium doping to improve internal electric field for excellent photocatalytic efficiency of g-C3N4 nanosheets

Graphitic carbon nitride is a promising photocatalyst to address environmental issues and energy applications. Herein, we develop an efficient defect-containing functionalized system of 2D selenium doped g-C3N4 porous nanosheets via one pot with two-step temperature for the first time. During heat treatment, Se-infused g-C3N4 nanosheets loosen stacking and form thinner nanosheets, which could effectively shorten the electronic path of charge migration. The introduction of nitrogen vacancies creates a midgap energy state below the CB, which improves the light-harvesting efficiency. Moreover, the dual effect of N vacancy and Se doping provides a driving force for the dissociation of excitons and achieves an effective spatial charge separation. High specific surface area (104.1 m2/g), suitable bandgap (2.65 eV), and good photocurrent response (0.45 µA cm−2) help to enhance the photocatalytic efficiency of 1-SeCN remarkably. Henceforth, high photocatalytic H2 production rate of 5441 µmol g−1 h−1 and CO evolution rate of 31.5 µmol g−1 h−1 verifies the effective Se doping enhances the photocatalytic efficiency of g-C3N4. Furthermore, DFT calculations are consistent with experimental results and this facile engineering strategy provides a scalable way to develop a novel, efficient g-C3N4-based photocatalyst for H2 production and CO2 reduction.

Effect of Cryogenic Heat Treatment on Multiple Tempered D-2 Tool Steel

The present day scenario in the manufacturing sector demands high productivity and the life of cutting tools plays a major role in increasing productivity. The freezing of metals has been acknowledged, for many decades, as an effective method for increasing" wear life" and decreasing residual stress in tool steels. Wear test using pin-on-disc machine was used to investigate the effect of multiple tempering after cryogenic treatment of D-2 tool steel. Conventional quenching (1010◦C) and tempering (515◦C) treatments were given along with intermediate cryogenic treatment (−196◦C). Specimens were subjected to wear tests on pin-on-disc machine in dry sliding condition for sliding distance of 6000 m at 6 kg load and for sliding speed of 3.0 m/s. Hardness data, microstructures, wear loss and Microstructure analys is analysis of worn surface throw light on the underlying metallurgical mechanism responsible in improving wear resistance property of the D-2 tool steel

Assessment of Soil Particle Distribution, Primary Nutrient Status and Their Response to Environmental Factors Across the Bengal Gram Productive Regions of Sangareddy, Telangana

The present study was carried out to know the fertility status of rabi grown bengal gram soils of Sanga Reddy district, Telangana state by thorough field survey during the year 2022-2023. Total of 150 soil samples (50 samples from each productivity regions) from soil surface (0 - 15 cm depth) across three productivity regions high (592-613 kg acre-1), medium (571-592 kg/acre) and low (<571 kg acre-1) were collected from the study area before sowing of the crop and analyzed for the soil particle size distribution, available Nitrogen(N), Phosphorous(P) and Potassium(K). Their status was quantified and analytical data was interpreted and statistical parameters like range, mean, standard deviation and coefficient of variation were calculated. The sand, silt and clay content in high, medium and low productivity regions averaged 32.1 %, 26.7%, 41.1 %; 33.7 %, 26.1 %, 40.1 % and 37.4 %, 25.1 %, 37.2 % respectively. The soil available N, P and K showed mean values of 224.3 kg ha-1, 209.4 kg ha-1 and 204.0 kg ha-1; 32.0 kg ha-1, 28.4 kg ha-1, 24.8 kg ha-1 and 316.4 kg ha-1, 311.0 kg ha-1, 306.1 kg ha-1 in high, medium and low productivity regions. Low productivity areas had the largest mean sand concentration, which influenced soil particle aggregation. Silt content varied greatly, particularly in medium and low productivity zones, whereas clay content varied the most in high productivity regions. Available N decreased from high to medium and medium to low production areas. Fluctuations in available P and K showed a wide distribution within each category, as evidenced by large standard deviation and coefficient of variation values across productivity regions, particularly for potassium, emphasising the importance of considering diverse soil conditions and factors influencing potassium availability when developing fertilisation strategies.

ADAPTATION MECHANISMS ARE USED BY THE BODY OF STUDENTS FOR RECOVERY AFTER PHYSICAL EXERTION

The study of the morphofunctional features of the body's adaptation to constantly changing living conditions is considered one of the most important problems of biology and medicine today. The effectiveness of adaptive processes in the body is the primary basis of good health and high productivity. Therefore, the resolution of the unexplained issues of this problem is important for the prevention and treatment of diseases, the search for effective rehabilitation measures. Knowledge of the laws of adaptation of the human body (athlete) to physical exertion is an objective prerequisite for the effective use of physical exercises in the rationalization of physical training aimed at preserving and strengthening people's health, increasing their work capacity, and implementing a genetically programmed longevity program. The defining function of muscle activity is the function of active adaptation of the body to constantly changing environmental conditions. The ultimate goal of this active adjustment is to maintain internal constancy environment, expanding the homeostatic limits of individual physiological constants, ensuring highly productive activity. The most effective means of adaptive change of a person's own nature is systematic physical training. High perfection of mechanisms of neurohumoral regulation functions; optimization of inter-system and intra-system connections; high development of self-regulation in the activity of functional systems. There is a direct relationship between the power of work and the perfection of mechanisms of regulation of functions: the more intensively the body functions under conditions of physical exertion, the greater the tension of regulatory systems; the more perfectly function regulation systems function, the body will be able to develop greater work capacity [1].

Greening the path to disruptive innovation: The roles of CEOs characteristics, green organizational identity, and green product competitiveness

AbstractThis study explores the link between sustainability orientation and disruptive innovation in small and medium‐sized enterprises (SMEs) by embracing both the natural resource‐based view (NRBV) and upper echelons theory. By drawing on these theories and extending them, it sheds light on the executives' characteristics and organizational contingencies leading to disruptive innovation. Starting from the CEOs' sustainability orientation, it investigates if and how it leads to disruptive innovation through the mediating role of green organizational identity and the moderating influence of both green product competitiveness and CEOs' gender‐related characteristics. Two wave time‐lagged survey data from 257 Chinese SMEs are analyzed to empirically test these relationships. Results suggest that SMEs with CEOs characterized by sustainability focus foster a green organizational identity, enabling them to generate disruptive innovations. Additionally, the presence of high green product competitiveness strengthens the connection between sustainability orientation and green organizational identity. Lastly, the relationship between this latter and disruptive innovation can be further enhanced by female CEOs by leveraging their specific skills and abilities. Implications for managers, organizations, and public policy are discussed.

Complementary inputs, outsourcing and vertical integration: Price versus quantity competition

AbstractWe compare the effects of price and quantity competition in an industry with complementary inputs, outsourcing and a vertically integrated firm where vertical integration occurs between a final goods producer and a subset of input suppliers. The profit of the integrated firm and the industry profit are higher under Bertrand competition, the profit of the non‐integrated firm is higher under Bertrand competition for high product differentiation, and consumer surplus and welfare are higher under Bertrand competition for low product differentiation. Further, no market foreclosure can be the preferred choice of the vertically integrated firm for any degree of product differentiation.

Value implications of followers in social marketplaces: insights into ego network structures

PurposeIn social marketplaces, follower ego networks are integral social capital assets for online sellers. While previous research has underscored the positive impact of the follower number on seller performance, little attention has been given to the structure of follower networks and their value implications. This research investigates two structural properties of follower networks—network centralization and density—and examines their main and contingent effects on sellers’ sales performance.Design/methodology/approachA 13-month panel dataset of 1,150 sellers in Etsy, a social marketplace for handmade and vintage products, was collected and analyzed. A fixed effects model was adopted to validate the hypotheses on the main effect of centralization and density, as well as the moderating effects of two store attributes: store age and product diversification.FindingsWe find that both network centralization and density negatively impact sellers’ sales performance, and these effects vary across store age and product diversification levels. Specifically, the negative effect of network centralization is less pronounced for older stores than young ones, whereas the negative effect of density is more severe for stores with high product diversification.Originality/valueThis research contributes to social commerce research by highlighting the significance of network structure, alongside network size, in assessing the value of followers and offers practical guidance for sellers in social marketplaces seeking to optimize their follower networks.

Productive scientists are associated with lower disruption in scientific publishing

While scientific researchers often aim for high productivity, prioritizing the quantity of publications may come at the cost of time and effort dedicated to individual research. It is thus important to examine the relationship between productivity and disruption for individual researchers. Here, we show that with the increase in the number of published papers, the average citation per paper will be higher yet the mean disruption of papers will be lower. In addition, we find that the disruption of scientists' papers may decrease when they are highly productive in a given year. The disruption of papers in each year is not determined by the total number of papers published in the author's career, but rather by the productivity of that particular year. Besides, more productive authors also tend to give references to recent and high-impact research. Our findings highlight the potential risks of pursuing productivity and aim to encourage more thoughtful career planning among scientists.

Short-term effects of irrigation and nitrogen management on paddy soil carbon pools under deep placement of basal fertilizer nitrogen

Active soil organic carbon (SOC) fractions are major driving factors of soil fertility. Understanding the effects of water and fertilizer management on changes in active SOC fractions helps improve soil quality and maintain high agricultural productivity. We conducted a 3-year field experiment in Northeast China. In this experiment, natural soil (CKT) was used as a blank, and two irrigation regimes were established: conventional flooded irrigation (FI) and controlled irrigation (CI). Four nitrogen application levels were set for both irrigation regimes under deep placement of basal fertilizer N: Nd0 (0 kg ha–1), Nd (110 kg ha–1), Nd1 (99 kg ha–1), and Nd2 (88 kg ha–1). After 3 years, at similar N fertilizer application rate, the rice yield, total organic carbon (TOC), and active SOC fraction content of CI were higher under CI than FI. The growth rate of rice yield was 3.8% − 8.63% under CI than FI. Under CI, the rice yield, active SOC fractions contents and carbon pool management index (CPMI) did not decrease with decreasing N application rate but instead reached the highest level in the CNd1 treatment. Overall, CI with Nd1 treatment appears to be the best practice for improving soil fertility and crop productivity in Northeast China.