High-pressure Mercury Intrusion Research Articles

Shale pore characteristics and their impact on the gas-bearing properties of the Longmaxi Formation in the Luzhou area

Deep shale has the characteristics of large burial depth, rapid changes in reservoir properties, complex pore types and structures, and unstable production. The whole-rock X-ray diffraction (XRD) analysis, reservoir physical property parameter testing, scanning electron microscopy (SEM) analysis, high-pressure mercury intrusion testing, CO2 adsorption experimentation, and low-temperature nitrogen adsorption–desorption testing were performed to study the pore structure characteristics of marine shale reservoirs in the southern Sichuan Basin. The results show that the deep shale of the Wufeng Formation Longyi1 sub-member in the Luzhou area is superior to that of the Weiyuan area in terms of factors controlling shale gas enrichment, such as organic matter abundance, physical properties, gas-bearing properties, and shale reservoir thickness. SEM is utilized to identify six types of pores (mainly organic matter pores). The porosities of the pyrobitumen pores reach 21.04–31.65%, while the porosities of the solid kerogen pores, siliceous mineral dissolution pores, and carbonate dissolution pores are low at 0.48–1.80%. The pores of shale reservoirs are mainly micropores and mesopores, with a small amount of macropores. The total pore volume ranges from 22.0 to 36.40 μL/g, with an average of 27.46 μL/g, the total pore specific surface area ranges from 34.27 to 50.39 m2/g, with an average of 41.12 m2/g. The pore volume and specific surface area of deep shale gas are positively correlated with TOC content, siliceous minerals, and clay minerals. The key period for shale gas enrichment, which matches the evolution process of shale hydrocarbon generation, reservoir capacity, and direct and indirect cap rocks, is from the Middle to Late Triassic to the present. Areas with late structural uplift, small uplift amplitude, and high formation pressure coefficient characteristics favor preserving shale gas with high gas content and production levels.

Quantitative Characterization of Pore–Fracture Structures in Coal Reservoirs by Using Mercury Injection–Removal Curves and Permeability Variation under Their Constraints

Pore and fracture structure heterogeneity is the basis for coalbed methane production capacity. In this paper, high-pressure mercury intrusion test curves of 16 coal samples from the Taiyuan Formation in the Linxing area are studied. Based on the fractal dimension values of mercury intrusion and retreat curves, the correlation between the two different fractal parameters is studied. Then, the permeability variation of different types of coal samples is studied using overlying pressure pore permeability tests. The correlation between the permeability variation of coal samples and dimension values is explored, and the results are as follows. (1) Based on porosity and mercury removal efficiency, all coal samples can be divided into three types, that is, types A, B, and C. Among them, Type A samples are characterized by lower total pore volume, with pore volume percentages ranging from 1000 to 10,000 nm not exceeding 15%. (2) During the mercury injection stage, both the M-model and S-model can reflect the heterogeneity of seepage pore distribution. In the mercury removal stage, the M-model cannot characterize the heterogeneity of pore size distribution in each stage, which is slightly different from the mercury injection stage. (3) The permeability of Type A samples is most sensitive to pressure, with a permeability loss rate of up to 96%. The original pore and fracture structure of this type of coal sample is relatively developed, resulting in a high initial permeability. (4) There is no significant relationship between compressibility and fractal dimension of mercury injection and mercury removal, which may be due to the comprehensive influence of pore structure on the compressibility of the sample.

Quantitative Characterization of Pore–Fracture Structures in Coal Reservoirs by Using Mercury Injection–Removal Curves and Permeability Variation under Their Constraints

Pore and fracture structure heterogeneity is the basis for coalbed methane production capacity. In this paper, high-pressure mercury intrusion test curves of 16 coal samples from the Taiyuan Formation in the Linxing area are studied. Based on the fractal dimension values of mercury intrusion and retreat curves, the correlation between the two different fractal parameters is studied. Then, the permeability variation of different types of coal samples is studied using overlying pressure pore permeability tests. The correlation between the permeability variation of coal samples and dimension values is explored, and the results are as follows. (1) Based on porosity and mercury removal efficiency, all coal samples can be divided into three types, that is, types A, B, and C. Among them, Type A samples are characterized by lower total pore volume, with pore volume percentages ranging from 1000 to 10,000 nm not exceeding 15%. (2) During the mercury injection stage, both the M-model and S-model can reflect the heterogeneity of seepage pore distribution. In the mercury removal stage, the M-model cannot characterize the heterogeneity of pore size distribution in each stage, which is slightly different from the mercury injection stage. (3) The permeability of Type A samples is most sensitive to pressure, with a permeability loss rate of up to 96%. The original pore and fracture structure of this type of coal sample is relatively developed, resulting in a high initial permeability. (4) There is no significant relationship between compressibility and fractal dimension of mercury injection and mercury removal, which may be due to the comprehensive influence of pore structure on the compressibility of the sample.

Effect of reservoir composition and structure on spontaneous imbibition: a case study of Shahejie Formation shale in Zhanhua Sag, Bohai Bay Basin

Spontaneous imbibition has a certain impact on the oil and gas recovery of shale reservoirs. However, the current research on the influence of mineral composition and pore structure on spontaneous imbibition is not sufficiently comprehensive and lacks quantitative evaluation. Therefore, this study employed experimental methods combining X-ray diffraction, scanning electron microscopy, high-pressure mercury intrusion, nuclear magnetic resonance, and spontaneous imbibition to qualitatively and quantitatively characterize the influence of mineral composition, content, and pore structure characteristics on spontaneous imbibition. The results indicate that the relationship between quartz, calcite, and clay minerals and the imbibition slope exhibits a two-stage distribution (with critical values of 25%, 40%, and 20%, respectively). With the increase in mineral content, the imbibition slope first increases and then decreases. Additionally, pore structure parameters such as average pore throat radius, sorting coefficient, and structural coefficient show a positive correlation with the imbibition slope. Furthermore, small pores contribute significantly during the early imbibition stage, while medium to large pores serve as the main flow channels during the diffusion stage. This study quantitatively evaluates the relationship between fluids and minerals, providing a theoretical basis for understanding the complex interaction between fluids and minerals.

Porosity and pore structure evolution during the weathering of black shale

Pore type and pore structure evolves systematically across continuous black shale weathering profile. However, the extend and process of pore structure change is still an enigma. In this study, we try to unveil the pore structure evolution during weathering process through studying Cambrian Hetang shales in southern China. Fourteen shale samples, from protolith zone (PZ), fractured and weathered shale zone (FWZ), and saprolite zone (SZ), were collected to elucidate how porosity and pore structure develop during black shale weathering under subtropical condition. Through low pressure argon (Ar) gas adsorption (LP-ArGA), high pressure mercury intrusion (HPMI), nuclear magnetic resonance(NMR) and field emission scanning electron microscope (FESEM) observation, the results reveal significant differences in physical properties and pore structures among the PZ, FWZ, and SZ samples. Specifically, compared to PZ, FWZ and SZ samples are characterized by higher clay mineral content, lower organic matter (OM), and the absence of carbonates and pyrite. Total porosity, determined through HPMI and NMR, exhibits a gradual increase from PZ (6.70 % and 6.41 %) to FWZ (20.47 % and 13.45 %) and SZ (23.22 % and 12.48 %). Ar adsorption isotherms indicate a change in pore type from predominantly ink-bottle and slit-shaped in the PZ to mainly slit-shaped in FWZ and SZ. Integrated analysis of LP-ArGA, HPMI, NMR and SEM observation suggests a substantial decrease in the contribution of micropores to total pore volume (PV) and a concurrent increase in larger pores (meso-macropores) with the increase of weathering intensity. This results in smoother surfaces of micro-transition pores but rougher surfaces of macropores. Changes in mineralogy composition during weathering play a crucial role in influencing pore structure of shales and further accelerating the release and migration of toxic elements in black shale. Our study provides the essential theoretical foundation for the remediation of soil and water environmental pollution caused by black shale weathering.

Porosity Characteristics of Coal Seams and the Control Mechanisms of Coal Petrology in the Xishanyao Formation in the Western Part of the Southern Junggar Basin

The porosity characteristics of coal seams serve as a pivotal factor in assessing the development potential of coalbed methane (CBM) resources, significantly influencing the adsorption and permeability capabilities of coal reservoirs, as well as the accumulation, entrapment, and preservation of CBM. In this study, we focused on the coal seams of the Xishanyao Formation in the western part of the southern Junggar Basin (NW China). By leveraging the complementarity of nuclear magnetic resonance (NMR), low-temperature liquid nitrogen experiments, and high-pressure mercury intrusion porosimetry (MIP) in spatial exploration range and precision, we conducted a comprehensive analysis to achieve a fine description of porosity characteristics. Furthermore, we explored the coal petrology factors controlling the pore characteristics of the Xishanyao Formation, aiming to provide geological evidence for the selection of favorable areas and the development potential evaluation of CBM in the study area. The results indicate the following: (1) The total pore volume of the coal samples is 6.318 × 10−3 cm3/g on average, and the micropore volume accounts for a relatively high proportion (averaging 44.17%), followed by the fine pores (averaging 39.41%). The average porosity is approximately 3.87%, indicating good gas storage and connectivity of the coal seams, albeit with some heterogeneity. The coal reservoir is dominated by micropores and fine pores with diameters less than 100 nm, and the pore structure is characterized by low pore volume and high pore area. (2) The pore structure is influenced by both the coalification degree and the coal maceral. Within the range of low coalification, porosity increases with the increase in coalification degree. Building upon this, an increase in the vitrinite content promotes the development of micropores and fine pores, while an increase in the inertinite content promotes the development of meso–macropores. The clay mineral content exhibits a negative correlation with the adsorption pore volume ratio and a positive correlation with the seepage pore volume ratio.

Quantitative Description of Pore and Fracture Distribution Heterogeneity Using Mercury Removal Curve and Applicability of Fractal Models

Many studies have used fractal theory to characterize pore structure distribution heterogeneity through mercury intake curves. However, there is relatively little research on the fractal model calculation of mercury removal curves. In this study, a high-pressure mercury intrusion test is used to describe the pore and fracture distribution heterogeneity (PFDH). The fractal physical meaning of the mercury removal curve was determined by calculating the change in the curve’s fractal dimension value. The results are as follows. (1) According to mercury removal efficiency and porosity, samples can be divided into types A (mercury removal efficiency above 35%) and B (mercury removal efficiency below 35%). In general, type A sample belongs to micro-pore-developed types, and type B samples belong to the macro-pore-developed type. (2) The Menger model (M) represents the complexity of a specific surface area, while the Sierpinski model (S) represents the roughness of the pore volume. Among all the samples, the lower-pore-volume region controls PFDH. (3) According to the calculation results of the single fractal model, it can be seen that the PFDH of type B is stronger than that of type A, which is similar to the results of mercury intrusion. According to the calculation structure of the multifractal model, it can be seen that the volume distribution heterogeneity of type B under various pores is significantly stronger than that of type A. This is opposite to the result of mercury injection. (4) DM has a relationship with the pore volume percentage at different stages, so the M model at the mercury inlet stage can better characterize PFDH at the mercury inlet stage.

Influence of coal rock on tight sandstone reservoirs in coal seam roofs: A case study of the lower jurassic in the Taibei sag, Turpan-Hami Basin, China

After shale gas, coalbed methane and gas hydrate, coal measure gas has become an important new unconventional resource, for which exploration to depths of >3000 m are taking place in China. However, owing to unusual geological conditions and as yet inadequate exploration technology the current level of exploration is low. The acidic water medium in coal-bearing strata affects the diagenesis of adjacent tight sandstone reservoirs, thereby influencing reservoir quality. However, the current understanding of the impact mechanism of coal seams on neighboring tight reservoirs is insufficient, constraining the further exploration of coal measure gas. In order to reveal the influence of coal rock on a tight sandstone reservoir in its roof, we study the coal-bearing strata of the Xishanyao Formation in the Taibei Sag of the Turpan-Hami Basin using cast thin sections, physical property tests, XRD analysis, carbon and oxygen isotopes, high-pressure mercury intrusion and low-temperature N2 adsorption. The carbonate cement in the sandstone reservoir of the coal seam roof was formed by the decarboxylation of organic acid. The organic acid, containing CO2 generated by coal rock hydrocarbon generation, has modified the tight sandstone reservoir of the coal seam roof via dissolution. This has improved the physical properties and pore throat structure of the tight sandstone reservoir close to the coal-sandstone interface. The amount of improvement extends to about 2 m into the sandstone. During the upward transport of fluid, the pre-existing carbonate cement dissolves and then precipitates, which causes the CO2 generated by the organic acid decarboxylation to exchange carbon with the carbon isotopes in the pre-existing carbonate cement. Due to the slow upward diffusion rate and limited diffusion distance of the CO2-bearing fluids, the carbonate cement exhibits gradually heavier δ13CPDB values with increasing distance from the coal-sandstone interface.

Pore Structure Characteristics and Reservoir Classification of Tight Sandstones within the Upper Permian Longtan Formation in the Laoshan Uplift, South Yellow Sea Basin: Implications for Hydrocarbon Exploration

The Upper Permian Longtan Formation in the Laoshan Uplift of the South Yellow Sea Basin hosts thick and distinctive tight sandstones. However, a comprehensive understanding of its pore structure and reservoir classification remains lacking. This study investigates the fully cored well, CSDP-2, utilizing thin section analysis, scanning electron microscopy, energy spectrum analysis, X-ray diffraction, high-pressure mercury intrusion, and nuclear magnetic resonance to characterize its petrophysical properties, pore space, and movable fluid characteristics. Additionally, fractal principles are further employed to examine reservoir heterogeneity and conduct a quantitative assessment, considering the complexity of tight sandstone pore structures. The findings reveal that the sandstones predominantly comprise feldspathic litharenites, with an average porosity of 1.567% and permeability of 0.099 mD, primarily containing intragranular pores. Two distinct sets of pores with significantly different sizes (r < 2 μm; r > 6 μm) were identified, displaying relatively high fractal dimensions and discrete distribution. Movable fluids primarily occupy pores with radii > 0.019 μm, reflecting pronounced overall heterogeneity. The reservoir was classified into three categories utilizing permeability, median radius, and movable fluid saturation as key evaluation parameters, with Class I representing a relatively high-quality reservoir. These findings advance our understanding of the pore development mechanism of tight sandstone reservoirs and provide geological evidence for further hydrocarbon exploration in this study area.

Pore structure characterization and its influence on aqueous phase trapping damage in tight gas sandstone reservoirs.

Aqueous phase trapping (APT), which is one of the most prominent damages, seriously restricts the natural gas production in tight gas sandstone with low permeability. Pore size and microscopic pore structures are the most important factors to determine the water blocking damage. In this paper, 9 core samples from tight gas sandstone with various physical properties were employed, and the pore size distribution (PSD) of the core samples were investigated by high pressure mercury intrusion tests (HPMI). Results showed that the porosity of core samples ranges from 5.68% to 13.7%, and the permeability ranges from 0.00456 to 7.86 mD, which is a typical tight reservoir with strong heterogeneity. According to the HPMI capillary curve, the cores can be divided into two types: Type I and Type II, and the pore sizes of type I are larger than that of type II. Fractal distributions were obtained using HPMI data to further determine the pore structure characteristics of tight reservoirs. The pore structures of tight sandstones display the multifractal fractal feature: D1 corresponding to macro-pores, and D2 corresponding to fractal dimension of micro-pores. Furthermore, APT damage was determined by the permeability recovery ratios (Kr) after gas flooding tests. The correlation of Kr and PSD and fractal dimensions were jointly analyzed in tight gas sandstone. Although positive correlations between pore size parameters and the permeability recovery ratios were observed with relatively weak correlations, for those core samples with very close permeability, pore size parameters (both permeability and PSD) is inadequate in clarifying this damage. The fractal dimension can well describe the complexity and heterogeneity of flow channels in pores, which can become the determining factor to distinguish the flow capacity of tight sandstone. The D2 for samples of type I and type II exhibited a good negative relation with Kr with a correlation coefficient of 0.9878 and 0.7723, respectively. The significance of this finding is that for tight gas sandstone, fractal dimensions, especially the small pore fractal dimension (D2), can be used to predict the possible APT damage very well.

Full-Scale Pore and Microfracture Characterization of Deep Coal Reservoirs: A Case Study of the Benxi Formation Coal in the Daning–Jixian Block, China

The pore-fracture structure of deep coal reservoirs is highly important for evaluating, exploring, and developing coalbed methane (CBM) resources. This study considers three coal samples from the DJ57 well in the Benxi Formation in the Daning–Jixian block on the eastern margin of the Ordos Basin as the research object. Based on the coal quality parameters of the coal samples, field emission scanning electron microscopy (FE-SEM), gas adsorption experiments, high-pressure mercury intrusion porosimetry (MIP), and microcomputed tomography (micro-CT) scanning were used to quantitatively characterize the nanoscale pores and microscale fractures in deep coal reservoirs and to evaluate the pore-fracture structure at different scales. The results reveal that the pore types in the Benxi Formation coal samples are diverse and include mainly organic matter (OM) pores, inorganic pores (intraparticle and interparticle pores), and microfractures. The organic pores are diverse in shape and mainly exhibit round, oval, and wedge shapes, while the microfractures exhibit slender stripes or serrated curves. The multiscale quantitative characterization of deep coal reservoir pores and fractures is based on a variety of pore characterization methods, and the pore and fracture volume distributions are mainly U-shaped, revealing the coexistence of micropores and microfractures. The volumes of micropores (0.3–2 nm), mesopores (2–50 nm), macropores (50 nm to 10 μm), and microfractures (>10 μm) account for 78.00%, 6.78%, 2.08%, and 13.14%, respectively, of the total pore volume (PV). Based on a full-scale pore-fracture splicing calculation, the total permeability of the Benxi Formation coal samples ranges from 5.77 to 28.22 mD. The observation results indicate that the microfractures are connected to each other, forming a network structure with strong connectivity. The microfractures are mainly associated with pore diameters>100 μm, accounting for approximately 95% of the total permeability. Moreover, micropores in deep coal reservoirs provide a large space for CBM adsorption, and microfractures enhance the seepage capacity of CBM.

Influences of lithofacies on fluid mobility in mixed sedimentary rocks: Insights from NMR analysis of the middle Permian Lucaogou Formation, Junggar Basin

The multi-source mixed sedimentation resulted in a unique series of mixed fine-grained sedimentary rocks evolved within the Permian Lucaogou Formation in the Jimusar Sag, located in the southeastern Junggar Basin, China. The variety of lithofacies within this series resulted in pronounced heterogeneity of pore structures, complicating the analysis of fluid occurrence space and state within reservoirs. As a result, the impact of lithofacies on fluid mobility remains ambiguous. In this study, we employed qualitative methods, such as field emission scanning electron microscopy (FE-SEM) and thin section observation, and quantitative analyses, including X-ray diffraction (XRD), total organic carbon (TOC), vitrinite reflectance (Ro), high-pressure mercury intrusion (HPMI) porosimetry, and nuclear magnetic resonance (NMR), along with linear and grey correlation analyses. This approach helped delineate the effective pore characteristics and principal factors influencing movable fluids in the fine-grained mixed rocks of the Lucaogou Formation in the Jimusar Sag, Junggar Basin. The findings indicate the development of three fundamental lithologies within the Lucaogou Formation: fine sandstone, siltstone, and mudstone. Siltstones exhibit the highest movable fluid saturation (MFS), followed by fine sandstones and mudstones sequentially. Fluid mobility is predominantly governed by the content of brittle minerals, the sorting coefficient (Sc), effective pore connectivity (EPC), and the fractal dimension (D2). High content of brittle minerals favors the preservation of intergranular pores and the generation of microcracks, thus offering more occurrence space for movable fluids. A moderate Sc indicates the presence of larger connecting throats between pores, enhancing fluid mobility. Elevated EPC suggests more interconnected pore throat spaces, facilitating fluid movement. A higher D2 implies a more intricate effective pore structure, increasing the surface area of the rough pores and thereby impeding fluid mobility. Ultimately, this study developed a conceptual model that illustrates fluid distribution patterns across different reservoirs in the Lucaogou Formation, incorporating sedimentary contexts. This model also serves as a theoretical framework for assessing fluid mobility and devising engineering strategies for hydrocarbon exploitation in mixed fine-grained sedimentary rocks.

Coevolutionary Diagenesis in Tight Sandstone and Shale Reservoirs within Lacustrine-Delta Systems: A Case Study from the Lianggaoshan Formation in the Eastern Sichuan Basin, Southwest China

Tight sandstone and shale oil and gas are the key targets of unconventional oil and gas exploration in the lake-delta sedimentary systems of China. Understanding the coevolutionary diagenesis of sandstone and shale reservoirs is crucial for the prediction of reservoir quality, ahead of drilling, in such systems. Thin-section description, scanning electron microscopy (SEM), X-ray diffraction (XRD), fluid inclusion analysis, porosity and permeability tests, high-pressure mercury intrusion (HPMI) measurements and nuclear magnetic resonance tests (NMR) were used to reveal the coevolutionary diagenetic mechanisms of a sandstone and shale reservoir in the Lianggaoshan Formation of the Eastern Sichuan Basin, China. The thermally mature, organic-matter-rich, dark shale of layer3 is the most important source rock within the Lianggaoshan Formation. It started to generate abundant organic acids at the early stage of mesodiagenesis and produced abundant hydrocarbons in the early Cretaceous. Porewater with high concentrations of Ca2+ and CO32− entered the sandstone reservoir from dark shale as the shale was compacted during burial. Potassium feldspar dissolution at the boundary of the sandstone was more pervasive than at the center of the sandstone. The K+ released by potassium feldspar dissolution migrated from the sandstone into mudstone. Grain-rimming chlorite coats occurred mainly in the center of the sandstone. Some silica exported from the shale was imported by the sandstone boundary and precipitated close to the shale/sandstone boundary. Some intergranular dissolution pores and intercrystal pores were formed in the shale due to dissolution during the early stages of mesodiagenesis. Chlorite coats, which precipitated during eodiagenesis, were beneficial to the protection of primary pore space in the sandstone. Calcite cement, which preferentially precipitated at the boundary of sandstone, was not conducive to reservoir development. Dissolution mainly occurred at the early stage of mesodiagenesis due to organic acids derived from the dark shale. Calcite cement could also protect some primary pores from compaction and release pore space following dissolution. The porosity of sandstone and shale was mainly controlled by the thickness of sandstone and dark shale.

Microscopic characteristics of tight sandstone reservoirs and their effects on the imbibition efficiency of fracturing fluids: A case study of the Linxing area, Ordos Basin

The Linxing area within the Ordos Basin exhibits pronounced reservoir heterogeneity and intricate micro-pore structures, rendering it susceptible to water-blocking damage during imbibition extraction. This study delved into the traits of tight sandstone reservoirs in the 8th member of the Shihezi Formation (also referred to as the He 8 Member) in the study area, as well as their effects on fracturing fluid imbibition. Utilizing experimental techniques such as nuclear magnetic resonance (NMR), high-pressure mercury intrusion (HPMI), and gas adsorption, this study elucidated the reservoir characteristics and examined the factors affecting the imbibition through imbibition experiments. The findings reveal that: ① The reservoir, with average porosity of 8.40% and average permeability of 0.642 × 10−3 μm2, consists principally of quartz, feldspar, and lithic fragments, with feldspathic litharenite serving as the primary rock type and illite as the chief clay mineral; ② Nano-scale micro-pores and throats dominate the reservoir, with dissolution pores and intercrystalline pores serving as predominant pore types, exhibiting relatively high pore connectivity; ③ Imbibition efficiency is influenced by petrophysical properties, clay mineral content, and microscopic pore structure. Due to the heterogeneity of the tight sandstone reservoir, microscopic factors have a more significant impact on the imbibition efficiency of fracturing fluids; ④ A comparative analysis shows that average pore size correlates most strongly with imbibition efficiency, followed by petrophysical properties and clay mineral content. In contrast, the pore type has minimal impact. Micropores are vital in the imbibition process, while meso-pores and macro-pores offer primary spaces for imbibition. This study offers theoretical insights and guidance for enhancing the post-fracturing production of tight sandstone reservoirs by examining the effects of these factors on the imbibition efficiency of fracturing fluids in tight sandstones.

Lower limits of physical properties and classification evaluation criteria of the tight reservoir in the Ahe Formation in the Dibei Area of the Kuqa depression

Abstract The Ahe Formation in the Dibei Area is a key natural gas exploration formation in the northern structural belt. Based on geological data such as formation tests and physical properties, the tight reservoirs were determined using the empirical statistics method, distribution function method, oil-bearing occurrence method, and bound fluid saturation method reasonably. The lower limit of the oil-bearing physical properties of the layer was further analyzed for the differences between the methods. The pore-throat structure of tight sandstone was characterized by high-pressure mercury intrusion data, and the classification and evaluation standard of tight sandstone in the Ahe Formation in the Dibei Area was established combining fractal theory and physical property data. The results show that the lower physical limit porosity of the tight reservoir of the Ahe Formation in the Dibei Area is 2.4%, and the lower permeability limit is 0.021 × 10−3 μm2. According to the fractal dimension characteristics of the mercury injection curve, the different structural characteristics of four types of pores (fracture, macropore, mesopore, and small pore) can be divided with the boundary values are 3,000, 1,000, and 100 nm; the tight reservoir of the Ahe Formation in Dibei Area can be classified into four categories: (a) type I reservoir (Ф > 7%), mainly composed of fracture and macropore; (b) type II reservoir (4% < Ф < 7%), mainly made up of macropore and mesopore; (c) type III reservoir (2% < Ф < 4%), mainly formed by mesopore; and (d) type IV reservoir (Ф < 2%) dominated by small pore, followed by mesopore.

High-pressure mercury intrusion analysis of pore structure in typical lithofacies shale

In this paper, statistical research on the characterization of pore and fracture structures is systematically conducted on shale reservoirs in different blocks and under different lithofacies conditions. The impact of lithological characteristics on shale pore fracture structures is revealed, and the coupling mechanism of "high-pressure mercury injection, pore fracture structure, and lithofacies" is clarified. Results show that: (a). When the capillary force is equal to 0.0035 MPa, the pore throat radius is equal to 209.661 μm. (b). There exist turning pressures both in injection curve and removal curve. When the capillary pressure is lower than 100 MPa, the slope of injection curve is high, while when the capillary pressure is higher than 100 MPa, the slope of injection curve becomes lower. (c). The majority of pores is distributed in the pore size interval range from 0.063 μm to 0.004 μm. (d). There are also a certain amount of regular pores in inorganic pores. Part of the pores are secondary intergranular dissolved pores formed by later dissolution.

Comprehensive pore structure characterization and permeability prediction of carbonate reservoirs using high-pressure mercury intrusion and X-ray CT

Comprehensive pore structure characterization and permeability prediction of carbonate reservoirs using high-pressure mercury intrusion and X-ray CT

Influence of tectonic preservation conditions on the nanopore structure of shale reservoir: A case study of Wufeng-Longmaxi Formation shale in western Hubei area, south China

Tectonism is one of the dominant factors affecting the shale pore structure. However, the control of shale pore structure by tectonic movements is still controversial, which limits the research progress of shale gas accumulation mechanism in the complex tectonic region of southern China. In this study, 34 samples were collected from two exploratory wells located in different tectonic locations. Diverse experiments, e.g., organic geochemistry, XRD analysis, FE-SEM, low-pressure gas adsorption, and high-pressure mercury intrusion, were conducted to fully characterize the shale reservoir. The TOC, Ro, and mineral composition of the shale samples between the two wells are similar, which reflects that the shale samples of the two wells have proximate pores-generating capacity and pores-supporting capacity. However, the pore characteristics of shale samples from two wells are significantly different. Compared with the stabilized zone shale, the porosity, pore volume, and specific surface area of the deformed zone shale were reduced by 60.61%, 64.85%, and 27.81%, respectively. Moreover, the macroscopic and fine pores were reduced by 54.01% and 84.95%, respectively. Fault activity and uplift denudation are not conducive to pore preservation, and the rigid basement of Huangling uplift can promote pore preservation. These three factors are important reasons for controlling the difference in pore structure between two wells shales. We established a conceptual model of shale pores evolution under different tectonic preservation conditions. This study is significant to clarify the scale of shale gas formation and enrichment in complex tectonic regions, and helps in the selection of shale sweet spots.

Pore Structure and Migration Ability of Deep Shale Reservoirs in the Southern Sichuan Basin

The migration phenomenon of deep shale gas is a subject that has yet to be fully comprehended, specifically regarding the migration ability of deep shale gas. This study focuses on the Longmaxi Formation in the southern Sichuan Basin, utilizing it as an example. Various experimental techniques, such as temperature-driven nitrogen and carbon dioxide adsorption, high-pressure mercury intrusion, XRD, and TOC analysis, are employed. The goal is to analyze the pore structure and fractal characteristics of the Longmaxi Formation shale. Additionally, the study aims to calculate its Knudsen number based on parameters like temperature gradient and pressure coefficient. The migration ability of the Longmaxi Formation shale in southern Sichuan Basin is also discussed. The results show the following: (1) The pore volume distribution of the Longmaxi Formation shale in the study area ranges from 0.0131 to 0.0364 cm3/g. Mesopores contribute approximately 56% of the pore volume, followed by micropores with a contribution rate of about 26%, and macropores contributing approximately 18%. Additionally, the Longmaxi Formation shale exhibits strong heterogeneity, with the fractal dimension (D1) of mesopores ranging from 2.452 to 2.8548, with an average of 2.6833, and the fractal dimension (D2) of macropores ranging from 2.9626 to 2.9786, averaging 2.9707. (2) The fractal dimensions of shale were significantly influenced by organic matter, inorganic minerals, and pore structure parameters. D1 and D2 were positively correlated with TOC, clay mineral content, and specific surface area, while exhibiting negative correlation with quartz. However, the correlations with calcite content, pore volume, and average pore size were not significant. (3) The proportion of pores satisfying Darcy flow in the Longmaxi Formation shale was approximately 3.7%–11.8%, with an average of 6.6%. Consequently, the migration capability of shale gas can be calculated using Darcy’s law. Furthermore, the migration capability of shale gas is controlled by D2, specifically the surface area, and the connectivity of macropores.

Diagenetic evolution of tight sandstone and the formation of an effective reservoir in the lower member 3 of the Shahejie Formation, Bohai Bay Basin, East China

Heterogeneity in the physical properties of tight sandstones is mainly caused by complex diagenetic interactions in various combinations during the burial process. The tight sandstone oil in the Linnan Sag of Bohai Bay Basin has great development potential but it is unclear how effective reservoirs were formed, and this is a significant reason why exploration in the deep reservoir is so difficult. Here we studied the diagenetic evolution of the tight sandstone of Lower Member 3 of the Shahejie Formation, Linnan Sag, Bohai Bay Basin, by using cores, thin sections, XRD, SEM, grain-size analysis, high-pressure mercury intrusion porosimetry, fluid inclusions, and carbon and oxygen stable isotopes. Compaction, replacement, cementation and dissolution diagenesis are identified; all four processes mainly occur in the A phase of mesodiagenesis. The interaction of formation burial, thermal evolution of organic matter and dehydration of gypsum leads to the alternating presence of three stages of alkaline fluids and two stages of acidic fluids. The average dissolution porosity of the dissolution sandstone facies is greater than the lower limit of the porosity for the effective reservoir in the study area, which is key to the formation of effective reservoirs. By determining differential diagenetic evolution sequences of tight sandstone reservoirs under the constraints of different lithologies where sandstone is interbedded with mudstone, we are able to elucidate the formation of the effective reservoir as follows: (1) In the eodiagenetic stage, a large amount of early carbonate cement developed in the sandstone adjacent to the mudstone, filling the primary pores and forming a cementation sandstone facies. Smaller amounts of early carbonate cement developed in the interior of the sandstone, which “fixed” the primary pores, and has a positive effect on the formation of a large number of secondary pores in the dissolution stage. (2) In the early stage of mesodiagenesis (A1), due to the filling of primary pores, it is difficult for acidic fluids to enter the cementation sandstone facies adjacent to mudstone, and the dissolution is weak. But dissolution within the sand body was strong, producing a large number of dissolution pores and forming a dissolution sandstone facies that clearly enhanced the physical properties. (3) In a second early stage of mesodiagenesis (A2), dissolution still played a dominant role in the dissolution sandstone facies, due to the development of dissolution pores in the previous stage (it is easy for acidic fluids to enter the dissolution sandstone facies). The physical properties of the dissolution sandstone facies were once again enhanced and an effective reservoir gradually began to form. (4) At the end of mesodiagenesis stages A1 and A2 (26.2–24.6 Ma; 7.5–2.8 Ma), the reservoir experienced two phases of petroleum charging. The charging of the cementation sandstone facies developed at the margins of the sandstones was difficult due to the filling of primary pores. The dissolution sandstone facies are oil-bearing, with higher porosity, which indicates an effective reservoir. By coupling the thermal evolution of organic matter and the dehydration of gypsum with differential diagenetic evolution and the porosity evolution of reservoir, we are able to establish a reservoir genetic model that involves alternating seepage of organic acids and alkaline brines.