Higher Polychlorinated Biphenyls Research Articles

Spatial distribution of polychlorinated biphenyls in High Tatras lake sediments

The objective of the present study was to gain insight on the spatial distribution of seven polychlorinated biphenyl (PCB) congeners in the High Tatras mountain range in Eastern Europe. Twenty high mountain lakes were sampled on their top-core sediment. Despite the relative uniform composition of PCB congeners among the lakes, there are important differences in the observed concentrations. Moderate top-core sediment concentrations of PCB congeners were observed (1.9 to 38ng/g dw for ∑PCB) in comparison to other high mountain or Arctic areas. The variation in PCB concentrations can partly be explained by a possible altitudinal effect, resulting in higher PCB concentrations at higher (colder) altitudes. Part of this enhanced accumulation of PCBs could be caused by external factors (topography and meteorology) and internal lake factors (sediment dynamics). Many of these factors were not quantified for all individual lakes and their influence could, therefore, only be studied for some.

PCBs and OH-PCBs in Serum from Children and Mothers in Urban and Rural U.S. Communities

East Chicago, Indiana is a heavily industrialized community bisected by the Indiana Harbor and Ship Canal, which volatilizes ~7.5 kg/yr polychlorinated biphenyls (PCBs). In contrast, the rural Columbus Junction, Iowa area has no known current or past PCB industrial sources. Blood from children and their mothers from these communities were collected April 2008 to January 2009 (n = 177). Sera were analyzed for all 209 PCBs and 4 hydroxylated PCBs (OH-PCBs). Sum PCBs ranged from nondetect to 658 ng/g lw (median = 33.5 ng/g lw). Sum OH-PCBs ranged from nondetect to 1.2 ng/g fw (median = 0.07 ng/g fw). These concentrations are similar to those reported in other populations without high dietary PCB intake. Differences between the two communities were subtle. PCBs were detected in more East Chicago mothers and children than Columbus Junction mothers and children, and children from East Chicago were enriched in lower-molecular weight PCBs. East Chicago and Columbus Junction residents had similar levels of total and individual PCBs and OH-PCBs in their blood. Concentrations of parent PCBs correlated with concentrations of OH-PCBs. This is the first temporally and methodologically consistent study to evaluate all 209 PCBs and major metabolites in two generations of people living in urban and rural areas of the United States.

Polychlorinated biphenyls (PCBs) in relation to secondary sex ratio – A systematic review of published studies

There is reasonably strong evidence linking reduced secondary sex ratio (proportion of males) and environmental exposures. Polychlorinated biphenyls (PCBs) are persistent contaminants of the environment and several studies have reported an association of PCBs with birth outcomes. A decrease in the male/female sex ratio at birth has been reported in some, but not all studies. The aim of this systematic review was to summarize and pool the research findings about the influence of PCBs on sex ratio. Several article databases and reference lists of identified articles were searched. Studies reporting the proportion of boys and girls born to individuals who were exposed to high PCB concentrations were included. The primary outcome measure was the proportion of males in groups exposed to high or low levels of PCBs. Studies with both direct and indirect surrogate PCB measurements were included. The search and selection resulted in 15 eligible studies on the association between the sex ratio and parental PCB exposures. Analyses of the high exposure groups showed that the sex ratio was not significantly altered from the historical reference range in 13 of the 15 articles. The majority of the exposure studies reported also internal comparisons between high and low PCB exposure levels. The pooled 95% confidence interval estimate for the difference in high and low maternal exposure with direct PCB measure was – 0.048 with 95% CI of (−0.121, 0.026). There was no strong or moderate indication that parental exposure to PCBs alters the sex ratio of the children.

Persistent organic pollutants in the atmosphere from urban and industrial environments in the Rhine Valley: PCBs, PCDD/Fs

Polychlorinated biphenyls (PCBs) and polychlorinated dibenzodioxin and furan (PCDD/F) concentrations in the atmosphere were analysed using passive air samplers (PAS) close to the Rhine River between France and Germany. Collectors were placed in industrial, urban, rural and remote areas (Vosges Mountains) between March 2009 and August 2010, and the mean PCB concentrations (sum of 22 congeners) were 3.3, 3.9, 4.1 and 1.4 ng PAS(-1) day(-1), respectively. Two events during the sampling period were observed in April 2009 and February-March 2010 with the highest PCB concentrations found in the industrial area (19.6 ng PAS(-1) day(-1)). PCDD/F level were measured during these periods, and the maximum concentration observed was from 37.5 fg WHO PAS(-1) day(-1.)

Survey of persistent organic pollutants (POPs) and polycyclic aromatic hydrocarbons (PAHs) in the atmosphere of rural, urban and industrial areas of Concepción, Chile, using passive air samplers

Passive air samplers (PAS) consisting of polyurethane foam (PUF) disks were used to assess air concentrations of polychlorinated biphenyl (PCBs), polycyclic aromatic hydrocarbons (PAHs), organochlorine pesticides (OCPs) and polybrominated diphenyl ethers (PBDEs) in rural, urban, and industrial sites in Concepción, Chile during a two-month deployment in the summer of 2007. Results for PCBs and PAHs showed a clear rural-urban-industrial gradient. PCB air concentrations (pg m−3) ranged from -30 to -350 and were ~2 to 5 times higher at industrial sites compared to rural sites. For PAHs, air concentrations (ng m−3) ranged from 26 to 230 and were 4 to 8 times higher at industrial sites. The PCB congener profile was dominated by high molecular weight PCBs at urban and industrial sites. The PAH profile was dominated by 3- and 4-ring PAHs accounting for more than 90% of the Σ15PAH, and dominated by phenanthrene (~40%). Of the HCH isomers, only y–HCH was detected with air concentrations ranging from 5 to 120pg m−3. While for DDT isomers, p,p’–DDE was the only compound detected, ranging from below detection limit (BDL) to 360pg m−3. Other OCPs (chlordanes, heptachlor and Dieldrin) showed low air concentrations (pg m−3) on the order of ~-1 - 3. Endosulfan, which is a newly listed persistent organic pollutant (POP) under the Stockholm Convention (SC) on POPs, ranged from 14 to 20pg m−3. Polybrominated diphenyl ethers (PBDEs) also newly listed under the SC, were relatively uniform across the transect with air concentrations (pg m−3) in the range of ~5 to 10. This study represents one of the first efforts to characterize the POPs composition in ambient air for urban and industrial areas of Chile.

Surveillance Program for Former PCB-Exposed Workers of a Transformer and Capacitor Recycling Company, Family Members, Employees of Surrounding Companies, and Area Residents—Executive Summary

In a German company polychlorinated biphenyls (PCB)-containing transformers and capacitors were recycled on a large scale. Human biomonitoring revealed a high PCB body burden in workers of the recycling company, in surrounding locations of this plant, in companies in the neighborhood of this plant, and in family members of these employees. In order to clarify whether possible adverse health effects occurred or may occur in the future, a prospective surveillance program was initiated. After an extensive literature search, an interdisciplinary group of experts developed a surveillance program based on current knowledge with respect to possible adverse health effects that might occur in the recycling process of transformers and capacitors. Exposure to various hazardous substances (PCB, polychlorinated dibenzo-p-dioxins and dibenzo-furans [PCDD/F], metals, solvents) was considered. Criteria derived from human biomonitoring results of PCB were used for admission to the program. Participants in the surveillance program are first informed about risks and aims of the program. Subsequently, physicians started a detailed documentation of participants' general and occupational history, with their complaints, diseases, and nutritional habits, as well as information regarding their living areas, by means of a standardized questionnaire. In addition, separate examinations were performed to detect possible neurological, immunological, (neuro)psychological, hormonal, and skin effects. Moreover, DNA exposure as assessed by the comet assay and antioxidative status were determined. The program will be offered at yearly intervals for 3 years, and then at 5 and 10 years after program onset. Until now the program has proved to be feasible, and acceptance among workers and their families has been high. Based on the results, criteria will be developed to define adverse health effects that might be attributable to a hazardous substance exposure.

Persistent organic pollutants in the Scheldt estuary: Environmental distribution and bioaccumulation

Levels of polychlorinated biphenyls (PCBs), polybrominated diphenyl ethers (PBDEs) and organochlorine pesticides (OCPs) were determined in the sediment and several species (European flounder, Platichthys flesus; common sole, Solea solea; Chinese mitten crab, Eriocheir sinensis; shore crab, Carcinus maenas; brown shrimp, Crangon crangon; blue mussel, Mytilus edulis and bristle worms, Polychaeta) from 7 locations in the Scheldt estuary (SE, the Netherlands–Belgium). Overall POP levels in the sediment were low. The average PCB and PBDE concentrations were respectively 31.5 and 115ng/g dry weight (dw). Highest sediment loads were measured in the vicinity of Antwerp (368ng PCBs/g dw), a location with intense harbor and industrial activities. Pollution concentrations in the tissues of biota were species-specific. Blue mussels contained the highest lipid concentrations (2.74±0.55%) and reached the highest contamination levels (from 287 to 1688ng PCBs/g ww, from 2.09 to 12.4ng PBDEs/g ww). Lowest tissue loads were measured in brown shrimp (from 3.27 to 39.9ng PCBs/g ww, from 0.05 to 0.47ng PBDEs/g ww). The PCB congener profile in most of the species was similar with the pattern found in the sediment. PCB 153 was the most abundant congener (16.5–25.7% in biota, 10.4% in sediment). In the sediment, the total amount of PBDEs consisted for more than 99% of BDE 209. Congener BDE 47 had the highest concentrations in all sampled species (38.5–70.1%). Sediment POP loadings and tissue concentrations were poorly correlated, indicating that a simple linear or non-linear relationship is insufficient to describe this relationship, possible caused by the complexity of the bioaccumulation processes and the variability in exposure. Because of the high PCB levels, regular consumption of fish and seafood, especially mussels, from the Scheldt estuary should be avoided.

Rapidly Equilibrating Micrometer Film Sampler for Priority Pollutants in Air

Modified polymer-coated glass samplers (POGs), termed EVA samplers, consist of micrometer-thin layers of ethylene vinyl acetate (EVA) coated onto a glass fiber filter or aluminum foil substrate. These samplers were designed to equilibrate rapidly with priority pollutants in air, making them ideal for short-term spatial studies in ambient or indoor air. The EVA sampler was calibrated by measuring the uptake of polychlorinated biphenyls (PCBs) over 8 weeks in an indoor environment, and four different film thicknesses were monitored that ranged from 0.1 to 30 μm. The results were used to calculate the average mass transfer coefficient (50.5 m/day) and generate contour maps that provide guidance in choosing an appropriate EVA sampler for a particular study based on film thickness, deployment time, and the log K(OA) of the anlayte. A range of air pollutant classes was also added to the EVA sampler prior to deployment to assess depuration rates. These included polychlorinated biphenyls (PCBs), current-use pesticides (CUPs), perfluorinated compounds (PFCs), and polybrominated diphenyl ethers (PBDEs). On the basis of the depuration profiles, the EVA sampler was a suitable equilibrium sampler for several CUPs and PCBs; however, for the high molecular weight PCBs and PBDEs, the EVA sampler operates as a linear uptake sampler. Samplers were also evaluated for their use as a rapid screening tool for assessing concentrations of siloxanes in indoor air. The EVA sampler was used to estimate air concentrations for D4 and D5 in laboratory air to be 118 and 89 ng/m(3), respectively. Analyses were performed directly using thermal desorption gas chromatography/mass spectrometry (TDS-GC-MS). EVA samplers show promise due to their relatively low cost and ease of deployment and applicability to a wide range of priority chemicals. The ability to alter the film thickness, and hence the sorption capacity and performance of the EVA sampler, allows for a versatile sampler that can be used under varying sampling conditions and deployment times.

Biodegradation of PCB congeners by white rot fungus, Ceriporia sp. ZLY-2010, and analysis of metabolites

Polychlorinated biphenyls (PCBs) are difficult to degrade due to poor solubility, toxicity, and thermal stability. In the present study, the feasibility of PCB congener biodegradation by Ceriporia sp. ZLY-2010 was evaluated. The biodegradation rates of four PCB congeners, 4,4′-dichlorobiphenyl, 2,3′,4′,5-tetrachlorobiphenyl, 2,2′,4,5,5′-pentachlorobiphenyl, and 2,2′,4,4′,5,5′-hexachlorobiphenyl were evaluated. The degradation rate of 4,4′-dichlorobiphenyl was 34.03% on incubation day 13, while that of 2,2′,4,4′,5,5′-hexachlorobiphenyl reached 40.05% on incubation day 17. Therefore, Ceriporia sp. ZLY-2010 was degrading the higher PCB congeners more efficiently. PCB congener degradation products were extracted using acetone and ethyl acetate. No 2,2′,4,5,5′-pentachlorobiphenyl metabolites were detected in Ceriporia sp. ZLY-2010 culture, whereas 2,2′,4,4′,5,5′-hexachlorobiphenyl appeared to degrade to benzoic acid. However, intermediates of 2,2′,4,4′,5,5′-hexachlorobiphenyl were not detected during degradation. Therefore, additional studies should be performed to explore the mechanisms of PCB degradation. Our results indicate that Ceriporia sp. ZLY-2010 is able to degrade highly chlorinated biphenyls and has potential for use in PCB biodegradation and bioremediation.

Enhanced flushing of polychlorinated biphenyls contaminated sands using surfactant foam: Effect of partition coefficient and sweep efficiency

Foam flushing is an in situ soil remediation technology based on the traditional surfactant flushing method. The contribution of mobility control to contaminant removal by foam is helpful for improving this technology. Foam flushing of polychlorinated biphenyl (PCB)-contaminated unconsolidated media was performed to evaluate the effect of the partition coefficient (PC) and sweep efficiency (SE) on PCB removal. Column flushing with surfactant solution and foam with different types and concentrations of surfactant was carried out for PCB removal. Two types of quartz sand were investigated to evaluate the Jamin effect on the SE value of the washing agent. The results demonstrate that a small PC value and large SE value are necessary to achieve high PCB removal for foam flushing. Compared with solution flushing, the introduction of foam can effectively control the mobility of the washing agent. Similar to solution flushing, solubilization is a key factor which dominates the removal of PCBs in foam flushing. In addition, the SE value and PCB removal by foam flushing is less affected by particle size. Therefore, foam flushing was proved to be more effective in porous media with low hydraulic conductivity and high porosity. An integrated flushing with water, surfactant solution and foam was performed and the results prove that this technology successfully combines the advantages of solution solubilization and mobility control by foam, and thus further increases the remediation efficiency of PCBs to 94.7% for coarse sand.

Levels and sources of planar and non-planar PCBs in pine needles across Poland

Under a small project, one-year-old Scots Pine needles collected from 25 spatially distant sites were examined in monitoring the extent of environmental diffusion and possible sources of polychlorinated biphenyls (PCBs) in ambient air, their depositions and uptake by plants in Poland. The congener-specific determination of planar and non-planar chlorobiphenyls was achieved by isotope dilution HRGC-HRMS method after a highly refined extraction on multi-layer column of silica gel and alumina layer and clean-up, and fractionations, followed by Hypercarb-HPLC and PYE-HPLC sub-fractionation steps. Contents of 117 chlorobiphenyls determined in pine needles varied for the 25 sites studied and is between 2.7 and 49 ng/g wet weight. The PCBs pollution and congener-specific composition of pine needles to some degree varied according to the site or region surveyed depending on population density and industrialization. Many of the country-side areas showed lower concentrations between 2.7 and 8.9 ng/g ww. Pine needles in areas close to well populated and industrial regions of Opole, Kutno, Włocławek and Dębica showed the highest PCB pollution with concentrations varying between 30 and 49 ng/g ww. The Kutno site showed the highest pollution and this fact probably can be explained by possible emission from transformer manufactures located at some distance west of the Kutno area. Factor analysis (FA) and depending on the site revealed on relationship of PCBs composition of pine needles both with highly chlorinated PCB constituents of the mixtures such as Chlorofen, Aroclor 1254, Aroclor 1268 and Sovol but also of lower chlorinated PCB constituents of Aroclor 1242, Aroclor 1248, Clophen A40 or Delor 103. Thermal processes were considered a less significant source of PCBs in ambient air over Poland compared to evaporative sources related to technical PCB formulations. Supplemental materials are available for this article. Go to the publisher's online edition of Journal of Environmental Science and Health: Part A to view the free supplemental file.

Feed Ingredients Mainly Contributing to Polycyclic Aromatic Hydrocarbon and Polychlorinated Biphenyl Residues

Animal nutrition constitutes an important issue for the animal production industry. Products intended for animal feed may contain undesirable substances which could endanger animal health or, because of their presence in livestock products, human health or the environment. In this sense, several incidents related with the presence of persistent organic pollutants, particularly with polychlorinated biphenyls (PCBs) and polycyclic aromatic hydrocarbons (PAHs), have happen in food and feed additives. Simple, fast, quantitative, and economic methods for determining PAHs and PCBs in potentially polluting feed ingredients were developed and evaluated. The methods involved liquid-liquid extraction (LLE), clean-up, and detection by liquid chromatography with fluorescence detection (LC-FD) for PAHs and gas chromatography (GC) coupled to electron capture detection (ECD) for PCBs, using tandem mass spectrometry (MS/MS) as confirmatory technique. The overall method quantification limits range from 0.020– 4.0 μg/Kg for PAHs and from 0.20–0.75 μg/Kg for PCBs, analyte recoveries are between 70 and 105% with relative standard deviations (RSD) lower than 20%. Once the method was optimized, it was applied to 25 feed ingredients considered as potential candidates for feedstuff. As expected, the samples of animal origin as shell powder and fish oil showed the highest PCB concentrations of 56 and 29 ng/g, which are equivalent to toxicological concentrations of 123 and 18 ng WHO-TEQDL-PCBs/Kg, respectively. Opposite results were obtained with PAHs and the highest PAH4 levels were detected alfalfa (47 μg/Kg), calcium phosphate (27 μg/Kg), and palm oil (23 μg/Kg) used as feed ingredients.

Development and Validation of a Gas Chromatography-Mass Spectrometry Method for the Determination of PCBs in Transformer Oil Samples-Application on Real Samples from Botswana

A procedure in which a retention time window for the determination of polychlorinated biphenyls (PCBs) congeners including those not presented in this study but of similar molar masses in transformer oil has been developed and validated. This procedure was successfully applied in the determination of transformer oil samples from Botswana for comparison with a preliminary inventory for PCB levels in transformer oil and other receptacles suspected to contain PCBs and developed during the formulation of the Botswana National Implementation Plan (NIP) for the sound management of persistent organic pollutants (POPs). Recoveries in the developed procedure initially meant for 39 PCB congeners ranged from 44.53±0.31 to 111.93±4.75% uncorrected for bias, while linearities i.e. r 2 values ranged from 0.9624 to 0.9999 with method detection limits (MDLs) varying from 0.02 to 0.13 ppm (w/v). Application of this procedure on real samples from Botswana showed that the transformer oil contained no PCBs although the preliminary data using screening equipment and kits for indicative inventory data showed high PCB contents in some cases of as much as 456 ppm (w/v). It is proposed here that this method be adopted in the SADC region for confirmation of presence and determination of the levels of PCBs where they are detected in order to improve on the preliminary inventories that were developed during the NIP development exercise for the Stockholm Convention (SC) in these countries.

Polychlorinated Biphenyl Congeners in River Sediments: Distribution and Source Identification Using Multivariate Factor Analysis

To assess the level of polychlorinated biphenyl (PCB) contamination and identify their sources, surface sediments were collected from selected locations along Nakdong River, Korea, and analyzed for 209 PCB congeners using high-resolution gas chromatography/high-resolution mass spectroscopy. PCB levels ranged from 0.124 to 79.2ng/g dry weight (coplanar PCBs 0.295 to 5720pg/g dry), which were similar to those of three other major rivers (Han, Geum, and Youngsan rivers) in Korea but slightly lower than those in neighboring countries. Regarding homologue composition, tetra-CBs were most abundant in most samples, but some samples with much higher PCBs concentrations had relatively lower proportions of tetra-CBs and higher proportions of penta- to hepta-CBs. To identify the sources of PCBs in sediment samples, principal component analysis/absolute principal component scores (PCA/APCS), positive matrix factorization (PMF), and multiple linear regression (MLR) were used with the congener composition of aroclors (1242, 1248, 1254, and 1260) and the flue gas of waste incinerators (data obtained from a previous article) as source profiles. Results showed that the three models showed similar source apportionments. Most sediment samples with lower PCB concentrations had higher proportions of incineration-derived materials, and some sediment samples with much higher PCB concentrations had higher proportions of aroclor 1260. This occurred because many industrial facilities, such as landfill leachate-treatment facilities, were gathered around sampling points with high PCB concentrations, and high-chlorinated PCBs are more stable in the elution process of landfill leachate than the incineration process. PCB concentrations estimated by APCS, PMF, and MLR were similar to the measured values with coefficients of determination ranging from 0.77 to 0.99.

The kinetics of cell surface receptor expression in children perinatally exposed to polychlorinated biphenyls

Exposure to polychlorinated biphenyls (PCBs) during pre-natal and early life can alter normal immune system development. Blood specimens from newborns, 6-, and 16-month-old infants were collected in the Michalovce and Svidnik/Stropkov districts, areas with, respectively, high and low environmental PCB contamination, and lymphocyte receptor expression was evaluated by multi-color flow cytometry. The results indicate that the percentage of lymphoid dendritic cells (DC) and naïve/resting T-lymphocytes were significantly increased at 6-months in Michalovce as compared to the same cell types in cord blood samples (p < 0.001), whereas natural regulatory T-lymphocytes and suppressor inducer T-lymphocytes were reduced (p < 0.001). Overall, a positive linear correlation of terminally differentiated effector memory (TEM) T-lymphocyte population with age, but a negative linear correlation for myeloid DC from birth to 6-months in both regions were found. Michalovce samples indicated significantly higher expression of memory T-lymphocytes (birth, 6th, and 16th month), TEM T-lymphocytes (birth and 6th month), and lymphoid DC (6th month) compared to the Svidnik/Stropkov regions. After adjustment for relevant covariates, such as maternal age, parity, season of birth, breastfeeding, birth weight, and gender, the myeloid DC, suppressor inducer T-lymphocytes, truly naïve helper/inducer T-lymphocytes, and TEM T-lymphocytes remained significantly different between districts in cord blood samples. The multivariate analysis models for 6- and 16-month samples showed district differences in all cellular determinants, except for lymphoid DC and macrophage-like cells. This study provides the first evidence that pre-natal and early post-natal exposure to PCBs affects the dynamics of cell surface receptor expression on lymphoid DC and DC-like cells, suggesting impaired immunologic development following pre-natal and early post-natal PCB exposure.

Analysis of PCBs degradation abilities of biphenyl dioxygenase derived from Enterobacter sp. LY402 by molecular simulation

Enterobacter sp. LY402 is a bacterium isolated from polluted soil. It can efficiently degrade polychlorinated biphenyls (PCBs) under aerobic conditions. However, the degradation was limited when it comes to high chlorine or double para-substituted PCBs. Biphenyl dioxygenase (BDO) is the key enzyme in the PCBs biodegradation process. It has been confirmed that the α-subunit of the iron-sulfur protein of biphenyl 2,3-dioxygenase (BphA1) directly influenced catalytic activities and substrate specificity. To know the degradation characteristics of BDO to PCBs, we analyzed PCBs degradation abilities of BphA1 from Enterobacter sp. LY402 by experiment and molecular simulation. Firstly, the degradation experiment of PCBs was performed, and the degradation rate constants (k) were calculated. Then the three-dimensional model of LY402-BphA1 was constructed. Through further docking studies with 209 PCB congeners, the PCBs binding abilities of LY402-BphA1 were measured and some crucial active site residues were identified. Moreover, the molecular descriptors of PCBs were calculated and analyzed to determine the correlation of molecular properties and degradation. The results showed that the affinity energy of PCBs was well matched with the k values of the different number of chlorine substituents. The binding ability of BphA1 greatly affected the PCBs degradation abilities of BDO. Hydrophobic contact was the main interaction between the residues of active site and PCB substrates. The number and subposition of chlorine substituents would influence the PCBs binding ability of BphA1 significantly. Ser283, Val287, Gly321 and Tyr384 residues in the active site of LY402-BphA1 showed high variability, and the space limitation of the active site of BphA1 had negative influence on the PCBs binding affinity of BDO. The changes of physical, electronic and geometrical properties could influence degradation and binding affinity of PCBs. Analysis of structural information, binding affinity and influences of molecular properties could be used to direct further modification of BDO to enhance biodegradation of PCBs and other toxic compounds.

Determinants of serum concentrations of 1,1-dichloro-2,2-bis( p-chlorophenyl)ethylene and polychlorinated biphenyls among French women in the CECILE study

Background Dichlorodiphenyltrichloroethane (DDT) and polychlorinated biphenyls (PCBs) are persistent organochlorine compounds bioaccumulating in human tissues. Body burden of organochlorines may be influenced by individual characteristics such as age, weight variations, breastfeeding, dietary habits and place of residence. Objectives To assess the current serum concentrations of 1,1-dichloro-2,2-bis( p-chlorophenyl)ethylene ( p,p′-DDE), the main DDT breakdown product, and of PCBs in women from two French administrative areas (Ille-et-Vilaine and Côte d'Or). To identify determinants of the current serum levels among individual characteristics related to intake, metabolism, and excretion of organochlorines. Methods We measured serum p,p′-DDE and PCB levels in 1055 general population women who were recruited in 2005–2007 to serve as controls in a case-control study on breast cancer. Associations between organochlorine levels and age, current body mass index (BMI), BMI change during the last 10 years, dietary habits, breastfeeding history, residence area and education were assessed in multivariate analyses. Results Median concentrations of p,p′-DDE and total PCBs were 85 and 240 ng/g lipid, respectively. Based on multivariate analyses, the main predictors of high p,p′-DDE levels included age and frequent consumption of saltwater fish in women below 50 years, and high BMI in older women. Total PCB levels increased markedly with age. Among older women, other important predictors of high PCB levels included frequent consumption of saltwater fish and low BMI. Our results are also suggestive of an inverse association between PCB levels and BMI gain during the last ten years. Women in Côte d'Or had significantly higher PCB levels than women in Ille-et-Vilaine. Conclusion The patterns of associations between determinants and serum organochlorine concentrations suggest that human PCB contamination is still ongoing in France. The most important predictors of serum p,p′-DDE and PCB concentrations among French women include age, body mass index, dietary habits, and place of residence.

Effects of exposure to halogenated organic compounds combined with dietary restrictions on the antioxidant defense system in herring gull chicks

The Herring gull (HG) ( Larus argentatus) is naturally exposed to halogenated organic compounds such as polychlorinated biphenyls (PCBs) through its diet. During periods of food scarcity, arctic seabirds experience lipid mobilization, allowing stored lipid soluble contaminants to re-enter the body circulation. In the present study, we investigated the effects of PCB exposure and fasting on the antioxidant defense system in HG chicks. Forty newly hatched chicks were exposed to contaminated cod liver oil for 6 weeks and then fasted for 1 week. We assessed the hepatic total oxyradical scavenging capacity (TOSC) against peroxynitrite, hydroxyl and peroxyl radicals, and measured glutathione (reduced: GSH, and oxidized: GSSG) levels and the enzymatic activities of catalase, glutathione peroxidase, glutathione reductase and superoxide dismutase. The results show that fasting significantly increased the HOC levels in the HG chick livers. Limited effects were observed on antioxidant responses; significant effects were only found for catalase (CAT) activity, Se-dependent GPX activity and the GSH/GSSG ratio in the exposed and fasted group. CAT and Se-dependent GPX activities correlated negatively with the PCB concentrations within this group, and a nonlinear relationship between glutathione and contaminant levels was also found. These effects were generally not observed after exposure or fasting alone and were likely related to the high PCB levels induced by the combination of exposure and fasting.

Fetal adrenal development: Comparing effects of combined exposures to PCB 118 and PCB 153 in a sheep model

This study investigated the effects of exposure to the ubiquitous contaminants polychlorinated biphenyls (PCBs) on the fetal adrenal cortex and on plasma cortisol using the domestic sheep (Ovis aries) as a model. Pregnant ewes were intendedly subjected to oral treatment with PCB 153 (98 μg/kg bw/day), PCB 118 (49 μg/kg bw/day) or the vehicle corn oil from mating until euthanasia on gestation day 134 (±0.25 SE). However, because of accidental cross-contamination occurring twice causing a mixed exposure scenario in all three groups, the focus of this paper is to compare three distinct groups of fetuses with different adipose tissue PCB levels (PCB 153high, PCB 118high and low, combined groups) rather than comparing animals exposed to single PCB congeners to those of a control group. When comparing endocrine and anatomical parameters from fetuses in the PCB 153high (n = 13) or PCB 118high (n = 14) groups with the low, combined group (n = 14), there was a significant decrease in fetal body weight (P < 0.05), plasma cortisol concentration (P < 0.001) and adrenal cortex thickness (P < 0.001). Furthermore, adrenal weight was decreased and plasma ACTH was increased only in the PCB 118high group. Expression of several genes encoding enzymes and receptors related to steroid hormone synthesis was also affected and mostly down-regulated in fetuses with high PCB tissue levels. In conclusion, we suggest that mono-and di-ortho PCBs were able to interfere with growth, adrenal development and cortisol production in the fetal sheep model. © 2011 Wiley Periodicals, Inc. Environ Toxicol, 2013.

Development and Validation of Protocols To Differentiate PCB Patterns between Farmed and Wild Salmon

Polychlorinated biphenyl (PCB) congener patterns based on full congener PCB analyses of three farmed and five wild species of salmon from coastal British Columbia, Canada are compared using principal components analysis (PCA) and the best fit linear decomposition of the observed PCB composition in terms of Aroclor 1242, 1254, and 1260 end-members. The two complementary analysis methods are used to investigate congener composition pattern differences between species, trophic levels, feeding preferences, and farmed or wild feeding regimes, with the intent of better understanding PCB processes in both salmon and salmon consumers. PCA supports classification of PCB congeners into nine groups based on a) structure activity groups (SAG) related to the bioaccumulation potential in fish-eating mammals, b) Cl number, and c) the numbers of vicinal meta- and para-H. All three factors are needed to interpret congener distributions since SAGs by themselves do not fully explain PCB distributions. Farmed salmon exhibit very similar congener patterns that overlap the PCA and Aroclor composition of their food, while wild salmon separate into two distinct groups, with chinook and "coastal" coho having higher proportions of the higher chlorinated, Aroclor 1260 type, nonmetabolizable congeners, and chum, pink, sockeye, and "remote" coho having higher proportions of the lower chlorinated, more volatile and metabolizable Aroclor 1242 type, congeners. Wild chinook have the highest PCB and toxic equivalent (TEQ) concentrations, and the highest proportions of A1254 A1260, and PCB congeners in the most refractory SAG. Because both "coastal" and "remote" coho groups are likely to be consuming prey of similar size and trophic level, the PCB delivery mechanism (e.g., atmosphere vs runoff) apparently has more influence on the salmon PCB profile than biotransformation, suggesting that the wild chinook PCB profile is determined by feeding preference. Overall, wild salmon distributions primarily relate to trophic level, feeding preferences, and longevity, while metabolism appears at most a minor factor. The new classification protocol takes better advantage of individual congener PCB analyses and provides a better framework for understanding the PCB distributions in salmon and, potentially, the movement of individual PCB congeners through marine food chains than previous classification schemes.