High Copy Number Plasmid Research Articles

Hydrodynamic Effects on Biofilm Development and Recombinant Protein Expression.

Hydrodynamics play an important role in the rate of cell attachment and nutrient and oxygen transfer, which can affect biofilm development and the level of recombinant protein production. In the present study, the effects of different flow conditions on the development of Escherichia coli biofilms and the expression of a model recombinant protein (enhanced green fluorescent protein, eGFP) were examined. Planktonic and biofilm cells were grown at two different flow rates in a recirculating flow cell system for 7 days: 255 and 128 L h−1 (corresponding to a Reynolds number of 4600 and 2300, respectively). The fluorometric analysis showed that the specific eGFP production was higher in biofilms than in planktonic cells under both hydrodynamic conditions (3-fold higher for 255 L h−1 and 2-fold higher for 128 L h−1). In the biofilm cells, the percentage of eGFP-expressing cells was on average 52% higher at a flow rate of 255 L h−1. Furthermore, a higher plasmid copy number (PCN) was obtained for the highest flow rate for both planktonic (244 PCN/cell versus 118 PCN/cell) and biofilm cells (43 PCN/cell versus 29 PCN/cell). The results suggested that higher flow velocities promoted eGFP expression in E. coli biofilms.

The Escherichia coli DnaK chaperone stimulates the α-complementation of β-galactosidase.

pUC18 and pUC19 are well-known high copy-number plasmid vectors routinely used for DNA cloning purposes. We show here that, in Escherichia coli transformed by native pUC18, the α-complementation of β-galactosidase (i.e., mediated by the peptide LacZα18) is intrinsically weak and slow, but is greatly stimulated by the DnaK/DnaJ/GrpE chaperone system. In contrast, the α-complementation mediated by the peptide LacZα19 (in E. coli transformed by the native pUC19) is much more efficient and therefore does not require the assistance of the DnaK chaperone machinery. The marked difference between these two LacZα peptides is reproduced in a cell-free protein expression system coupled with α-complementation. We conclude that: (i) α-complementation of β-galactosidase is DnaK-mediated depending upon the LacZα peptide donor; (ii) DnaK, sensu stricto, is not necessary for α-complementation, but can enhance it to a great extent; (iii) this observation could be used to establish an easy and inexpensive method for screening small molecules libraries in search of DnaK inhibitors and also for deciphering the DnaK-mediated protein quality control mechanism.

Beyond the ABCs-Discovery of Three New Plasmid Types in Rhodobacterales (RepQ, RepY, RepW).

Copiotrophic marine bacteria of the Roseobacter group (Rhodobacterales, Alphaproteobacteria) are characterized by a multipartite genome organization. We sequenced the genomes of Sulfitobacter indolifex DSM 14862T and four related plasmid-rich isolates in order to investigate the composition, distribution, and evolution of their extrachromosomal replicons (ECRs). A combination of long-read PacBio and short-read Illumina sequencing was required to establish complete closed genomes that comprised up to twelve ECRs. The ECRs were differentiated in stably evolving chromids and genuine plasmids. Among the chromids, a diagnostic RepABC-8 replicon was detected in four Sulfitobacter species that likely reflects an evolutionary innovation that originated in their common ancestor. Classification of the ECRs showed that the most abundant plasmid system is RepABC, followed by RepA, DnaA-like, and RepB. However, the strains also contained three novel plasmid types that were designated RepQ, RepY, and RepW. We confirmed the functionality of their replicases, investigated the genetic inventory of the mostly cryptic plasmids, and retraced their evolutionary origin. Remarkably, the RepY plasmid of S. pontiacus DSM 110277 is the first high copy-number plasmid discovered in Rhodobacterales.

Synthetic Biology Construct of Ebola Virus in Bacteria Surrogate Is Stable and Safe for Rapid Detection Studies in a BSL-2 Laboratory Setting

Rapid detection of virulent pathogens during an outbreak is critical for public health advisories and control of the disease in a population. While many molecular techniques for point of care and clinical diagnosis abound, the US experience with the COVID-19 testing in the early stages of the pandemic underscores the critical importance of determining the appropriate target gene(s) with in-built controls that reliably detect pathogens with high sensitivity and specificity. Assays and research for diagnostics and therapy could be slowed during an epidemic because access to the required BSL-3 and BSL-4 laboratories are limited. So, during the 2014 West Africa Ebola outbreak, we tested the hypothesis that using synthetic cDNA of Ebolavirus in a bacteria surrogate (fit for all lab settings), would remain unmutated and safe after several generations, serving as an effective positive control in research settings, self test and point-of-care detection platforms. Primers were designed for the detection and quantification of the nucleoprotein (NP) gene of the 2014 Makona Ebola strain (KR781608.1, 733 - 1332 bp). To test the stability of artificially inserted translation arrest in the Orf of the model gene, it was edited to include three STOP codons in the RNA transcript using SNAP GENE. The segment was then spliced into a high copy number plasmid, cloned into One ShotTM TOP10 Escherichia coli (Invitrogen), and tested for stability and safety by periodic subculture, extraction and sequencing. Unlike COVID-19, rapid detection of blood-borne etiologies like Ebola requires optimized protocols for blood matrix. Using real-time PCR and newly designed primer pairs, the EBOV surrogate was detected and enumerated in human blood and regular broth and buffers. Based on aligned sequence analysis, the EBOV synthetic NP gene was stable (>99.9999% similarity coefficient) for at least 3 months. Detection sensitivity in broth and blood was at least 100 cells/ml or about 5.8 × 103 to 7.3 × 103 virion equivalents per ml. While the developments of transcription-and-replication-competent virus like particles (trVLP) have made it possible to study the infection and replication cycles of virulent pathogens in BSL-2 laboratories, the simplicity of our model and the reproducibility of detection and enumeration show the utility of synthetic bio-components as positive controls for point of care diagnostic tools. The inserted stop codons remained intact after many generations, suggesting that expressed virulent proteins can be easily silenced in synthetic biology models for research in BSL-1 and 2 and a wide range of pathogens. Synthetic bio-components can thereby aid further research by reducing costs and improving safety for workers and stakeholders.

Sequence Analysis of an Endogenous Plasmid from Enterococcus faecalis and the Construction of Shuttle Vectors

The aim of this study was to determine and analyze the DNA sequence of the endogenous plasmid pXW from Enterococcus faecalis EXW27, and to construct an Escherichia coli/Enterococcus faecalis shuttle vector based on its minimal replicon. The endogenous plasmid pXW was isolated from E. faecalis EXW27 with good probiotic properties. The DNA sequence of pXW was determined and analyzed, and then the replicon of plasmid pXW was used to construct an Escherichia coli/Enterococcus faecalis shuttle vector. The host range, transformation efficiency and stability of the Escherichia coli/Enterococcus faecalis shuttle vector were also studied. The results showed that plasmid pXW was 8617 bp in size and its GC content was 33.29%. It contained 8 ORFs and was assumed to be θ-type replicating plasmid. The copy number of plasmid pXW in E. faecalis EXW27 was up to 32.09±0.93, indicating that pXW was a high copy number plasmid. In this study, the minimal replicon of plasmid pXW was determined, and an Escherichia coli/Enterococcus faecalis shuttle vector was constructed based on this replicon. The shuttle vector had a wide host range and was successfully transformed into different types of lactic acid bacteria. The transformation efficiency was between 1.96×102~8.96×103 CFU/μg (plasmid DNA), and the plasmid loss rate was between 28.54% and 52.82%. In this study, we successfully constructed an Escherichia coli/Enterococcus faecalis shuttle vector with wide host range, high transformation efficiency and high stability, which provides a new tool for gene manipulation of lactic acid bacteria.

Migration of glutamate decarboxylase by cold treatment on whole-cell biocatalyst triggered activity for 4-aminobutyric acid production in engineering Escherichia coli

Glutamate decarboxylase B (GadB) from Escherichia coli, an intrinsic pyridoxal 5′-phosphate (PLP)-dependent enzyme has been employed for 4-aminobutyric acid (GABA) biosynthesis, which involves the glutamate import and GABA export via a transporter located in the inner membrane as rate determined step of whole-cell (WC) biotransformation. Herein, GadB was cloned and overexpressed in E. coli under a constitutive promoter in a high copy number plasmid, and 46.9 g/L GABA was produced. It was observed that GadB migrated to the periplasm when the WC were subjected to −20 °C cold treatment for 24 h prior to the biotransformation. Kinetic studies indicated that the enzymatic turnover rate of WC increased 2-fold after cold treatment, which was correlated with the migration rate of GadB, and up to 88.6% of GadB. The export or possible migration of GadB mitigated the rate-limiting step of WC biotransformation, and a 100% conversion of substrate to GABA was obtained. Finally, we launched a promising strategy for GABA production of 850 g/L from cost-effective monosodium glutamate (MSG) by using WC biocatalysts with 10-times recycling.

Outer Membrane Vesicles Derived from Klebsiella pneumoniae Are a Driving Force for Horizontal Gene Transfer.

Gram-negative bacteria release Outer Membrane Vesicles (OMVs) into the extracellular environment. Recent studies recognized these vesicles as vectors to horizontal gene transfer; however, the parameters that mediate OMVs transfer within bacterial communities remain unclear. The present study highlights for the first time the transfer of plasmids containing resistance genes via OMVs derived from Klebsiella pneumoniae (K. pneumoniae). This mechanism confers DNA protection, it is plasmid copy number dependent with a ratio of 3.6 times among high copy number plasmid (pGR) versus low copy number plasmid (PRM), and the transformation efficiency was 3.6 times greater. Therefore, the DNA amount in the vesicular lumen and the efficacy of horizontal gene transfer was strictly dependent on the identity of the plasmid. Moreover, the role of K. pneumoniae-OMVs in interspecies transfer was described. The transfer ability was not related to the phylogenetic characteristics between the donor and the recipient species. K. pneumoniae-OMVs transferred plasmid to Escherichia coli, Salmonella enterica, Pseudomonas aeruginosa and Burkholderia cepacia. These findings address the pivotal role of K. pneumoniae-OMVs as vectors for antimicrobial resistance genes spread, contributing to the development of antibiotic resistance in the microbial communities.

Production of trans-cinnamic acid by whole-cell bioconversion from l-phenylalanine in engineered Corynebacterium glutamicum

Backgroundtrans-cinnamic acid (t-CA) is a phenylpropanoid with a broad spectrum of biological activities including antioxidant and antibacterial activities, and it also has high potential in food and cosmetic applications. Although significant progress has been made in the production of t-CA using microorganisms, its relatively low product titers still need to be improved. In this study, we engineered Corynebacterium glutamicum as a whole-cell catalyst for the bioconversion of l-phenylalanine (l-Phe) into t-CA and developed a repeated bioconversion process.ResultsAn expression module based on a phenylalanine ammonia lyase-encoding gene from Streptomyces maritimus (SmPAL), which mediates the conversion of l-Phe into t-CA, was constructed in C. glutamicum. Using the strong promoter PH36 and ribosome binding site (RBS) (in front of gene 10 of the T7 phage), and a high-copy number plasmid, SmPAL could be expressed to levels as high as 39.1% of the total proteins in C. glutamicum. Next, to improve t-CA production at an industrial scale, reaction conditions including temperature and pH were optimized; t-CA production reached up to 6.7 mM/h in a bioreactor under optimal conditions (50 °C and pH 8.5, using NaOH as base solution). Finally, a recycling system was developed by coupling membrane filtration with the bioreactor, and the engineered C. glutamicum successfully produced 13.7 mM of t-CA (24.3 g) from 18.2 mM of l-Phe (36 g) and thus with a yield of 75% (0.75 mol/mol) through repetitive supplementation.ConclusionsWe developed a highly efficient bioconversion process using C. glutamicum as a biocatalyst and a micromembrane-based cell recycling system. To the best of our knowledge, this is the first report on t-CA production in C. glutamicum, and this robust platform will contribute to the development of an industrially relevant platform for the production of t-CA using microorganisms.

Indigoidine biosynthesis triggered by the heavy metal-responsive transcription regulator: a visual whole-cell biosensor.

During the last few decades, whole-cell biosensors have attracted increasing attention for their enormous potential in monitoring bioavailable heavy metal contaminations in the ecosystem. Visual and measurable output signals by employing natural pigments have been demonstrated to offer another potential choice to indicate the existence of bioavailable heavy metals in recent years. The biosynthesis of the blue pigment indigoidine has been achieved in E. coli following heterologous expression of both BpsA (a single-module non-ribosomal peptide synthetase) and PcpS (a PPTase to activate apo-BpsA). Moreover, we demonstrated herein the development of the indigoidine-based whole-cell biosensors to detect bioavailable Hg(II) and Pb(II) in water samples by employing metal-responsive transcriptional regulator MerR and PbrR as the sensory elements, and the indigoidine biosynthesis gene cluster as a reporter element. The resulting indigoidine-based biosensors presented a good selectivity and high sensitivity to target metal ions. High concentration of target metal exposure could be clearly recognized by the naked eye due to the color change by the secretion of indigoidine, and quantified by measuring the absorbance of the culture supernatants at 600 nm. Dose-response relationships existed between the exposure concentrations of target heavy metals and the production of indigoidine. Although fairly good linear relationships were obtained in a relatively limited concentration range of the concentrations of heavy metal ions, these findings suggest that genetically controlled indigoidine biosynthesis triggered by the MerR family transcriptional regulator can enable a sensitive, visual, and qualitative whole-cell biosensor for bioindicating the presence of bioaccessible heavy metal in environmental water samples. KEY POINTS: • Biosynthesis pathway of indigoidine reconstructed in a high copy number plasmid in E. coli. • Visual and colorimetric detection of Hg(II) and Pb(II) by manipulation of indigoidine biosynthesis through MerR family metalloregulator. •Enhanced detection sensitivity toward Hg(II) and Pb(II) achieved using novel pigment-based whole-cell biosensors.

Harnessing the Endogenous 2μ Plasmid of Saccharomyces cerevisiae for Pathway Construction.

pRS episomal plasmids are widely used in Saccharomyces cerevisiae, owing to their easy genetic manipulations and high plasmid copy numbers (PCNs). Nevertheless, their broader application is hampered by the instability of the pRS plasmids. In this study, we designed an episomal plasmid based on the endogenous 2μ plasmid with both improved stability and increased PCN, naming it p2μM, a 2μ-modified plasmid. In the p2μM plasmid, an insertion site between the REP1 promoter and RAF1 promoter was identified, where the replication (ori) of Escherichia coli and a selection marker gene of S. cerevisiae were inserted. As a proof of concept, the tyrosol biosynthetic pathway was constructed in the p2μM plasmid and in a pRS plasmid (pRS423). As a result, the p2μM plasmid presented lower plasmid loss rate than that of pRS423. Furthermore, higher tyrosol titers were achieved in S. cerevisiae harboring p2μM plasmid carrying the tyrosol pathway-related genes. Our study provided an improved genetic manipulation tool in S. cerevisiae for metabolic engineering applications, which may be widely applied for valuable product biosynthesis in yeast.

Improved Yield of Recombinant Protein via Flagella Regulator Deletion in Escherichia coli.

Protein production requires a significant amount of intracellular energy. Eliminating the flagella has been proposed to help Escherichia coli improve protein production by reducing energy consumption. In this study, the gene encoding a subunit of FlhC, a master regulator of flagella assembly, was deleted to reduce the expression of flagella-related genes. FlhC knockout in the ptsG-deleted strain triggered significant growth retardation with increased ATP levels and a higher NADPH/NADP+ ratio. Metabolic flux analysis using a 13C-labeled carbon substrate showed increased fluxes toward the pentose phosphate and tricarboxylic acid cycle pathways in the flhC- and ptsG-deleted strains. Introduction of a high copy number plasmid or overexpression of the recombinant protein in this strain restored growth rate without increasing glucose consumption. These results suggest that the metabolic burden caused by flhC deletion was resolved by recombinant protein production. The recombinant enhanced green fluorescent protein yield per glucose consumption increased 1.81-fold in the flhC mutant strain. Thus, our study demonstrates that high-yield production of the recombinant protein was achieved with reduced flagella formation.

Endogenous 2μ Plasmid Editing for Pathway Engineering in Saccharomyces cerevisiae.

In Saccharomyces cerevisiae, conventional 2μ-plasmid based plasmid (pC2μ, such as pRS425) have been widely adopted in pathway engineering for multi-copy overexpression of key genes. However, the loss of partition and copy number control elements of yeast endogenous 2μ plasmid (pE2μ) brings the issues concerning plasmid stability and copy number of pC2μ, especially in long-term fermentation. In this study, we developed a method based on CRISPR/Cas9 to edit pE2μ and built the pE2μ multi-copy system by insertion of the target DNA element and elimination of the original pE2μ plasmid. The resulting plasmid pE2μRAF1 and pE2μREP2 demonstrated higher copy number and slower loss rate than a pC2μ control plasmid pRS425RK, when carrying the same target gene. Then, moving the essential gene TPI1 (encoding triose phosphate isomerase) from chromosome to pE2μRAF1 could increase the plasmid viability to nearly 100% and further increase the plasmid copy number by 73.95%. The expression using pE2μ multi-copy system demonstrated much smaller cell-to-cell variation comparing with pC2μ multi-copy system. With auxotrophic complementation of TPI1, the resulting plasmid pE2μRT could undergo cultivation of 90 generations under non-selective conditions without loss. Applying pE2μ multi-copy system for dihydroartemisinic acid (DHAA) biosynthesis, the production of DHAA was increased to 620.9 mg/L at shake-flask level in non-selective rich medium. This titer was 4.73-fold of the strain constructed based on pC2μ due to the more stable pE2μ plasmid system and with higher plasmid copy number. This study provides an improved expression system in yeast, and set a promising platform to construct biosynthesis pathway for valuable products.

A Standardized Inverter Package Borne by Broad Host Range Plasmids for Genetic Circuit Design in Gram-Negative Bacteria

Genetically encoded logic gates, especially inverters-NOT gates-are the building blocks for designing circuits, engineering biosensors, or decision-making devices in synthetic biology. However, the repertoire of inverters readily available for different species is rather limited. In this work, a large whole of NOT gates that was shown to function previously in a specific strain of Escherichia coli, was recreated as broad host range (BHR) collection of constructs assembled in low, medium, and high copy number plasmid backbones of the SEVA (Standard European Vector Architecture) collection. The input/output function of each of the gates was characterized and parametrized in the environmental bacterium and metabolic engineering chassis Pseudomonas putida. Comparisons of the resulting fluorescence cytometry data with those published for the same gates in Escherichia coli provided useful hints on the portability of the corresponding gates. The hereby described inverter package (20 different versions of 12 distinct gates) borne by BHR plasmids thus becomes a toolbox of choice for designing genetic circuitries in a variety of Gram-negative species other than E. coli.

Proteome profiling and vector yield optimization in a recombinant adeno-associated virus-producing yeast model.

ABSTRACTRecent studies on recombinant adeno‐associated viral (rAAV) vector production demonstrated the generation of infectious viral particles in Saccharomyces cerevisiae. Proof‐of‐concept results showed low vector yields that correlated with low AAV DNA encapsidation rates. In an attempt to understand the host cell response to rAAV production, we profiled proteomic changes throughout the fermentation process by mass spectrometry. By comparing an rAAV‐producing yeast strain with a respective non‐producer control, we identified a subset of yeast host proteins with significantly different expression patterns during the rAAV induction period. Gene ontology enrichment and network interaction analyses identified changes in expression patterns associated mainly with protein folding, as well as amino acid metabolism, gluconeogenesis, and stress response. Specific fold change patterns of heat shock proteins and other stress protein markers suggested the occurrence of a cytosolic unfolded protein response during rAAV protein expression. Also, a correlative increase in proteins involved in response to oxidative stress suggested cellular activities to ameliorate the effects of reactive oxygen species or other oxidants. We tested the functional relevance of the identified host proteins by overexpressing selected protein leads using low‐ and high‐copy number plasmids. Increased vector yields up to threefold were observed in clones where proteins SSA1, SSE1, SSE2, CCP1, GTT1, and RVB2 were overexpressed. Recombinant expression of SSA1 and YDJ insect homologues (HSP40 and HSC70, respectively) in Sf9 cells led to a volumetric vector yield increase of 50% relative to control, which validated the importance of chaperone proteins in rAAV‐producing systems. Overall, these results highlight the utility of proteomic‐based tools for the understanding and optimization of rAAV‐producing recombinant strains.

Reversal of mcr-1-Mediated Colistin Resistance in Escherichia coli by CRISPR-Cas9 System.

PurposeThe plasmid-borne mobilized colistin resistance gene (mcr-1) was discovered in 2015. Subsequently, the rapid horizontal transfer of mcr-1 gene to diverse bacterial species poses a serious threat to public health, which urgently needs the introduction of novel antimicrobial strategies. Therefore, the purpose of this study is to sensitize bacteria to colistin and reduce the propagation of mcr-1 gene by curing mcr-1-harboring plasmid in Escherichia coli (E. coli) using the CRISPR-Cas9 system.MethodsTwo sgRNAs specific to mcr-1 gene were designed and cloned into plasmid pCas9. The recombinant plasmid pCas9-mcr was transformed into E. coli carrying pUC19-mcr-1 or pHNSHP45, separately. The elimination efficiency in strains was evaluated by PCR and quantitative real-time PCR (qPCR). The antimicrobial susceptibility test was performed using the broth microdilution method.ResultsIn this study, we constructed the high copy number plasmid pUC19-mcr-1 and recombinant plasmid pCas9-m1 or pCas9-m2, which contain 20 nt or 30 nt sgRNA sequences targeted to mcr-1, respectively. PCR and qPCR results showed that mcr-1-harboring plasmids could be efficiently eliminated, and there was no significant correlation between sgRNA lengths and curing efficiency. However, when comparing restructured high copy number plasmid (pUC19-mcr-1) to natural resistance plasmid (pHNSHP45) in eliminating efficiency, we found that the content of plasmid backbone had an influence on efficiency. Furthermore, the conjugation assays verified that the engineered CRISPR-Cas9 system in bacteria or in bacteria genome can protect the recipient from plasmid-borne mcr-1 transfer via conjugation. Additionally, sequence analysis showed that three different types of defects in CRISPR-Cas9 system lead to escape mutants.ConclusionWe presented a method that only one plasmid-mediated CRISPR-Cas9 system can be used to efficiently resensitize E. coli to colistin. Moreover, this system provided a great potentiality to counteract the propagation of mcr-1 among bacterial pathogens.

Omics Analysis Reveals the Mechanism of Enhanced Recombinant Protein Production Under Simulated Microgravity.

Simulated microgravity (SMG) is regarded as a suitable environment to produce recombinant proteins. This study showed that β-glucuronidase expressing Escherichia coli had higher productivity of recombinant protein and higher plasmid copy number under SMG compared with the normal gravity condition. The cellular changes were analyzed at both transcriptomic and proteomic levels. The upregulation of a group of ribosome/RNA polymerase genes and a cluster of genes involving energy metabolism at transcriptomic level stood out for improved production of recombinant protein under SMG. The protein folding modulators such as chaperones were upregulated at proteomic level, which could be a result of the increased activity of protein synthesis and can help recombinant protein production. Protein export was also strengthened, which was revealed at both transcriptomic and proteomic levels. The results demonstrated that SMG is a favorable environment for recombinant protein production arousing the upregulation of protein synthesis, protein folding, and protein export.

Potentiation of curing by a broad-host-range self-transmissible vector for displacing resistance plasmids to tackle AMR.

Plasmids are potent vehicles for spread of antibiotic resistance genes in bacterial populations and often persist in the absence of selection due to efficient maintenance mechanisms. We previously constructed non-conjugative high copy number plasmid vectors that efficiently displace stable plasmids from enteric bacteria in a laboratory context by blocking their replication and neutralising their addiction systems. Here we assess a low copy number broad-host-range self-transmissible IncP-1 plasmid as a vector for such curing cassettes to displace IncF and IncK plasmids. The wild type plasmid carrying the curing cassette displaces target plasmids poorly but derivatives with deletions near the IncP-1 replication origin that elevate copy number about two-fold are efficient. Verification of this in mini IncP-1 plasmids showed that elevated copy number was not sufficient and that the parB gene, korB, that is central to its partitioning and gene control system, also needs to be included. The resulting vector can displace target plasmids from a laboratory population without selection and demonstrated activity in a mouse model although spread is less efficient and requires additional selection pressure.

A bacterial gene-drive system efficiently edits and inactivates a high copy number antibiotic resistance locus

Gene-drive systems in diploid organisms bias the inheritance of one allele over another. CRISPR-based gene-drive expresses a guide RNA (gRNA) into the genome at the site where the gRNA directs Cas9-mediated cleavage. In the presence of Cas9, the gRNA cassette and any linked cargo sequences are copied via homology-directed repair (HDR) onto the homologous chromosome. Here, we develop an analogous CRISPR-based gene-drive system for the bacterium Escherichia coli that efficiently copies a gRNA cassette and adjacent cargo flanked with sequences homologous to the targeted gRNA/Cas9 cleavage site. This “pro-active” genetic system (Pro-AG) functionally inactivates an antibiotic resistance marker on a high copy number plasmid with ~ 100-fold greater efficiency than control CRISPR-based methods, suggesting an amplifying positive feedback loop due to increasing gRNA dosage. Pro-AG can likewise effectively edit large plasmids or single-copy genomic targets or introduce functional genes, foreshadowing potential applications to biotechnology or biomedicine.

High copy number plasmid engineering for biopharmaceutical-grade pDNA production in Lactococcus lactis

High copy number plasmid engineering for biopharmaceutical-grade pDNA production in Lactococcus lactis

Design and Control of Extrachromosomal Elements in Methylorubrum extorquens AM1.

Genetic tools are a prerequisite to engineer cellular factories for synthetic biology and biotechnology. Methylorubrum extorquens AM1 is an important platform organism of a future C1-bioeconomy. However, its application is currently limited by the availability of genetic tools. Here we systematically tested repABC regions to maintain extrachromosomal DNA in M. extorquens. We used three elements to construct mini-chromosomes that are stably inherited at single copy number and can be shuttled between Escherichia coli and M. extorquens. These mini-chromosomes are compatible among each other and with high-copy number plasmids of M. extorquens. We also developed a set of inducible promoters of wide expression range, reaching levels exceeding those currently available, notably the PmxaF-promoter. In summary, we provide a set of tools to control the dynamic expression and copy number of genetic elements in M. extorquens, which opens new ways to unleash the metabolic and biotechnological potential of this organism for future applications.