High Piezoelectric Coefficient Research Articles

A high performance lead-free flexible piezoelectric nanogenerator based on AlFeO3 nanorods interspersed in PDMS matrix for biomechanical energy scavenging to sustainably power electronics

Since lead-based piezoelectric nanogenerators (PENGs) possess serious health risks, environmental problems, proper disposal issues, and biocompatibility concerns, this work presents the fabrication of a flexible piezoelectric nanogenerator utilizing lead-free orthorhombic AlFeO3 nanorods for biomechanical energy scavenging to sustainably power electronics. Hydrothermal technique is used to synthesize the AlFeO3 nanorods and the PENG was fabricated on Indium tin oxide (ITO) coated Polyethylene terephthalate (PET) flexible film with AlFeO3 nanorods interspersed in polydimethylsiloxane (PDMS). transmission electron microscopy proved that the AlFeO3 nanoparticles are of nanorods shape. Through x-ray Diffraction, it is validated that AlFeO3 nanorods have orthorhombic phase and crystalline structure. A high piezoelectric charge coefficient (d 33 ) of 400 pm V−1 is obtained from the piezoelectric force microscopy of AlFeO3 nanorods. With optimized concentration of AlFeO3 in the polymer matrix, an open circuit voltage (V OC) of 30.5 V, current density (J C) of 0.7888 μA cm−2 and an instantaneous power density of 240.6 mW m−2 are obtained under the application of a force of 1.25 kgf. To investigate the nanogenerator’s practical utility, the PENG is used for lighting multiple LEDs, charging of a capacitor and as a pedometer via biomechanical energy harvesting. Hence, it can be employed for developing various self-powered wearable electronics such as flexible skin, artificial cutaneous sensors, etc.

3D Printing and processing of miniaturized transducers with near-pristine piezoelectric ceramics for localized cavitation

The performance of ultrasonic transducers is largely determined by the piezoelectric properties and geometries of their active elements. Due to the brittle nature of piezoceramics, existing processing tools for piezoelectric elements only achieve simple geometries, including flat disks, cylinders, cubes and rings. While advances in additive manufacturing give rise to free-form fabrication of piezoceramics, the resultant transducers suffer from high porosity, weak piezoelectric responses, and limited geometrical flexibility. We introduce optimized piezoceramic printing and processing strategies to produce highly responsive piezoelectric microtransducers that operate at ultrasonic frequencies. The 3D printed dense piezoelectric elements achieve high piezoelectric coefficients and complex architectures. The resulting piezoelectric charge constant, d33, and coupling factor, kt, of the 3D printed piezoceramic reach 583 pC/N and 0.57, approaching the properties of pristine ceramics. The integrated printing of transducer packaging materials and 3D printed piezoceramics with microarchitectures create opportunities for miniaturized piezoelectric ultrasound transducers capable of acoustic focusing and localized cavitation within millimeter-sized channels, leading to miniaturized ultrasonic devices that enable a wide range of biomedical applications.

Ferroelectric and piezoelectric properties of lead-free Li0.06(K0.5Na0.5)0.94NbO3 thin films

Lead-free ([Formula: see text][Formula: see text])NbO3 (KNN) and [Formula: see text]([Formula: see text][Formula: see text])[Formula: see text]NbO3 (LKNN) thin films were fabricated by a sol-gel method. The effects of Li substitution on crystal structure, microstructure and electrical properties of KNN film were systematically studied. Li doping can enhance the ferroelectric and piezoelectric properties of KNN film. Compared with pure KNN film, the LKNN film possesses larger remanent polarization ([Formula: see text] [Formula: see text] 9.3 [Formula: see text]C/[Formula: see text]) and saturated polarization ([Formula: see text] [Formula: see text] 41.2 [Formula: see text]C/[Formula: see text]) and lower leakage current density ([Formula: see text]A/[Formula: see text] at 200 kV/cm). Meanwhile, a typical butterfly shaped piezoelectric response curve is obtained in the LKNN film with a high piezoelectric coefficient ([Formula: see text] [Formula: see text] 105 pm/V). Excellent fatigue resistance ([Formula: see text][Formula: see text] switching cycles) and aging resistance ([Formula: see text] 180 days) demonstrate the long-term working stability of LKNN film. These findings indicate that KNN-based lead-free piezoelectric films have a broad application prospect in microelectromechanical systems (MEMS).

First-principles study of electronic, mechanical and piezoelectric properties of Janus MoSH

ABSTRACT Janus transition metal dichalcogenides (TMDCs) type two-dimensional materials have been widely studied because of their unique asymmetrical structures and properties. In the preparation of Janus TMDCs, replacing the top layer S atoms of MoS2 with H atoms could yield unique Janus MoSH, which has been scarcely reported. In this work, the electronic, mechanical and piezoelectric properties of Janus MoSH are systematically studied using first principles calculations for the first time. The band structure of Janus MoSH is of metallic nature with two bands crossing the Fermi level. This material has a stable structure, and the Poison ratio ν > 1/3 indicates the good ductility. The relatively higher piezoelectric coefficients, e11 of −4.27 × 10−10 C/m and d11 of −5.09 pm/V for Janus MoSH, compared with the typical piezoelectric semiconductor materials MoS2 (3.64 × 10−10 C/m and 3.73 pm/V, respectively) may reflect suitable piezoelectric effect in the former. The above calculations may show that Janus MoSH would be potentially adopted as efficient sensors and piezoelectric components.

Theoretical and Experimental Studies on Sensitivity and Bandwidth of Thickness-Mode Driving Hydrophone Utilizing A 2-2 Piezoelectric Single Crystal Composite.

Piezoelectric composites, which consist of a piezoelectric material and a polymer, have been extensively studied for the applications of underwater sonar sensors and medical diagnostic ultrasonic transducers. Acoustic sensors utilizing piezoelectric composites can have a high sensitivity and wide bandwidth because of their high piezoelectric coefficient and low acoustic impedance compared to single-phase piezoelectric materials. In this study, a thickness-mode driving hydrophone utilizing a 2-2 piezoelectric single crystal composite was examined. From the theoretical and numerical analysis, material properties that determine the bandwidth and sensitivity of the thickness-mode piezoelectric plate were derived, and the voltage sensitivity of piezoelectric plates with various configurations was compared. It was shown that the 2-2 composite with [011] poled single crystals and epoxy polymers can provide high sensitivity and wide bandwidth when used for hydrophones with a thickness resonance mode. The hydrophone element was designed and fabricated to have a thickness mode at a frequency around 220 kHz by attaching a composite plate of quarter-wavelength thickness to a hard baffle. The fabricated hydrophone demonstrated an open circuit voltage sensitivity of more than -180 dB re 1 V/μPa at the resonance frequency and a -3 dB bandwidth of more than 55 kHz. The theoretical and experimental studies show that the 2-2 single crystal composite can have a high sensitivity and wide bandwidth compared to other configurations of piezoelectric elements when they are used for thickness-mode hydrophones.

The Versatility of Piezoelectric Composites

Piezoelectric materials possess the capability to interchangeably convert electrical energy into a mechanical response. While current piezoelectric materials exhibit strong properties, known limitations have inhibited further development. This review describes the ability to combine different piezoelectric materials into a composite to create well-rounded properties. The different types of connectivity classes are described as well as important design considerations and theoretical models. The contributions from the active and passive phases are outlined, focusing primarily on ferroelectric ceramics and polymer-based composites. The key advantage of piezoelectric composites is their ability to combine the flexibility of polymers with the high electromechanical coupling and piezoelectric coefficients of ferroelectric ceramics or single crystals appropriate for a variety of applications. Composites are prominent in medical ultrasound imaging and therapy, underwater acoustic sensing, industrial structural health monitoring, energy harvesting, and numerous other emerging applications.

Fatigue-free dielectric and piezoelectric response in single-crystal BaTiO3 tuned by dislocation imprint

Dislocations have recently been imprinted into barium titanate single crystals to provide local domain wall pinning sites. Here, we assess the cycling stability under unipolar loading for the interaction between dislocations with [001] line vector and engineered ferroelectric domain walls. We find that a high large-signal piezoelectric strain coefficient (∼2100 pm/V) and dielectric permittivity (20 800) can be obtained without degradation if the topological interaction between domain wall and dislocation line is well chosen to utilize transient and permanent pinning sites. Our findings demonstrate the potential of dislocation engineering for the manipulation of the mobility of domain walls in bulk ferroelectrics.

Design and analysis of a d15 mode piezoelectric energy generator using friction-induced vibration

Research works have been conducted on transverse and longitudinal mode piezoelectric energy generation to collect energy from ambient vibrations. However, the inconsistency with the frequency of the energy source and low output power density remain problems for high energy output. In this work, we propose a shear mode piezoelectric energy generator, which utilizes the friction-induced vibration (FIV) and high shear mode piezoelectric coefficient to improve the energy output. A piezoelectric coupled FIV mathematical model is developed to accurately calculate the dynamic vibration response and voltage output. The dynamic voltage response is validated by experiment, and it proves the possibility of continuous friction-induced high-frequency vibration. The energy generation process is evaluated by transient charging simulation of a storage capacitor through an iteration process, which was experimentally validated in the literature. Parameter studies have been conducted to investigate the influences of the piezoelectric patch dimensional parameters, vibration system parameters, friction model parameters, methods of electrical connections, and different piezoelectric materials on the energy generation performance to provide guidance for better design. Under ideal experiment conditions with proper parameters, a volume of m3 PZT4 piezoelectric material indicates root mean square (RMS) charging power density of Wm−3 and Wm−3 with electrically in parallel and electrically in series, respectively. While using the same amount of material and structural setup, the single crystal PMN-PT piezoelectric material shows RMS charging power density of Wm−3 and Wm−3 with electrically in parallel and electrically in series, correspondingly. These promising results demonstrate that close to W-level RMS charging power output may be realized by structure optimization of energy generator design and incorporating multiple generators together for operation. Possible incorporation into vehicle braking systems can be considered to utilize the wasted friction energy, and it may offer an energy supply for low-power wireless devices.

Piezoelectric Response and Cycling Fatigue Resistance of Low-Temperature Sintered PZT-Based Ceramics

The preparation of low-cost multilayer piezoelectric devices requires using cheap internal electrodes between the dielectric layers. A general strategy is to reduce the sintering temperature Ts of the ceramic layer by sintering aids which can form a liquid phase. Here, 0.2 wt% Li2CO3 was added as a sintering aid to tailor the sinterability and piezoelectricity of the commercial PZT ceramics. As verified from experiments, the piezoelectric ceramics could be densified at a sintering temperature above 940 °C, suitable for co-firing with the cheap internal electrode. The optimized sintering temperature of 980 °C can be confirmed for the 0.2 wt% Li2CO3-modified PZT ceramics due to its high piezoelectric coefficient d33 ~ 701 pC/N, planar coupling factor kp ~ 66.7%, and a low mechanical quality factor Qm ~ 71 with a transition temperature of Tc ~ 226 °C, presenting the characteristics of typical soft piezoelectric ceramics. Moreover, both the potential piezoelectric strain ~0.13% under 20 kV/cm and the good cycling fatigue characteristic (>104 cycles) of the studied piezo compositions indicates strong competitiveness in the field of multilayer piezoelectric devices.

Flexible Film Bulk Acoustic Resonator Based on Low-Porosity β-Phase P(VDF-TrFE) Film for Human Vital Signs Monitoring.

P(VDF-TrFE) is a promising material for flexible acoustic devices owing to its good piezoelectric performance and excellent stretchability. However, the high density of internal pores and large surface roughness of the conventional P(VDF-TrFE) results in a high propagation attenuation for acoustic waves, which limits its use in flexible acoustic devices. In this paper, a novel method based on two-step annealing is proposed to effectively remove the pores inside the P(VDF-TrFE) film and reduce its surface roughness. The obtained P(VDF-TrFE) film possesses excellent characteristics, including a high breakdown strength of >300 kV/mm, a high-purity β-phase content of more than 80%, and high piezoelectric coefficients (d33) of 42 pm/V. Based on the low-porosity β-phase P(VDF-TrFE) film, we fabricated flexible film bulk acoustic resonators (FBARs) which exhibit high sharp resonance peaks. The pressure sensor was made by sandwiching the FBARs with two PDMS microneedle patches. Heartbeat and respiration rate monitoring were achieved using the pressure sensor. This work demonstrates the feasibility of high-performance flexible piezoelectric acoustic resonators based on low-porosity P(VDF-TrFE) films, which could see wider applications in the wearable sensors for both physical and chemical sensing.

Crystallographic texture and phase structure induced excellent piezoelectric performance in KNN‐based ceramics

AbstractIt is difficult to maintain strong piezoelectric properties over a wide temperature range in (K,Na)NbO3 (KNN)‐based ceramics owing to the polymorphic phase boundary (PPB). Here, we propose advantageously utilizing the synergistic effect of crystal orientation and phase structure to address this issue. The 〈0 0 1〉pc textured (1 − x)(K0.48Na0.52)(Nb0.96Sb0.04)O3–x(Bi0.5Ag0.5)ZrO3 (KNNS–xBAZ) ceramics with different phase structures were synthesized via the templated grain growth method. A high piezoelectric coefficient (d33) of 505 ± 25 pC/N, an electric field‐induced strain of 0.21%, and a superior temperature stability (d33 exhibited a high retention of ≥78% at the temperature up to 200°C; strain maintained within 5.7% change over a temperature range of 30–150°C) were simultaneously achieved in textured KNNS–0.03BAZ ceramics. The flattened Gibbs free energy induced by the R–O–T multiphase coexistence, the strong anisotropy of crystals, and the abundant nanodomains contributed to the enhanced piezoelectric properties. The contribution of the strong anisotropy of crystals in 〈0 0 1〉pc textured ceramics compensates for the deterioration of the piezoelectric properties caused by the phase structure deviation from the PPB with increasing temperature, which benefits the superior temperature stability of the textured KNNS–0.03BAZ ceramics. The previous merits prove that utilizing the synergistic effect of crystal orientation and phase structure is an effective strategy to boost the piezoelectricity and their temperature stability of KNN‐based ceramics.

Nanofiller‐Induced Enhancement of PVDF Electroactivity for Improved Sensing Performance

AbstractPiezoelectric self‐powered sensors are promising platforms for wearable portable devices. Poly(vinylidene fluoride) (PVDF) and its copolymer derivatives are extensively explored as a soft piezoelectric material owing to their high piezoelectric coefficient, chemical thermal stability, biocompatibility, lightweight, and excellent flexibility. It is proved that the dominance of the electroactive (EA) β‐phase crystals versus the non‐electroactive α‐phase crystals is one of the key parameters to obtaining high piezoelectric performance of PVDF. Conventional methods, such as mechanical stretching, electrical poling, and high‐temperature annealing, are investigated to enhance the fraction of the β‐phase. Recently, embedding nanoscale fillers in the PVDF matrix has been investigated to further increase the β‐phase fraction and achieved considerable advances. The introduction of nanofillers is also advantageous in terms of improving the electrical conductivity and dielectric properties of PVDF, which are not readily obtained through conventional methods. This review introduces the principles of EA phase transformation in the presence of nanofillers and summarizes recent advances achieved by introducing various fillers, such as perovskites, oxide semiconductors, and 2D chalcogenides. The potential sensor applications of the PVDF nanocomposites responding to temperature, light, acoustic, and mechanical stimuli are reviewed. This review ends with the outlook of this new approach.

Monolayer group IV monochalcogenides T-MX (M = Sn, Ge; X = S, Se) with fine piezoelectric performance and stability

Monolayer group monochalcogenides (MX; M = Sn, Ge; X = S, Se) in the orthogonal α-phase are excellent piezoelectric materials. In this study, a configuration with bonding features similar to the α-phase is proposed (T-phase) for monolayer MX using the first-principles method. Based on the modern theory of polarization, as implemented in Vienna Ab initio Simulation Package, the T-phase is determined to be an excellent piezoelectric phase for monolayer MX. The in-plane piezoelectric coefficient d11 of T-SnS is 452.3 pm/V, which is larger than that reported for most two-dimensional binary compounds in the α-phase, including α-SnSe (∼250 pm/V). The large piezoelectric coefficients of T-MX mainly stem from its distinctive puckered configuration, which make it extraordinarily flexible along the polarization direction. The study results suggest a possibility for designing high piezoelectric coefficient materials with MX, and the potential application of T-MX in the fields of energy collection and nanoelectromechanical systems needs to be analyzed in future studies.

Sm-Doped PIN-PMN-PT Transparent Ceramics with High Curie Temperature, Good Piezoelectricity, and Excellent Electro-Optical Properties.

Transparent piezoelectric materials are capable of coupling several physical effects such as optics, acoustics, electricity, and mechanical deformation together, which expands applications for mechanical-electro-optical multifunctional devices. However, piezoelectricity, transparency, and Curie temperature restrict each other, so it is difficult to achieve high piezoelectricity with both good transparency and a high Curie point. In this paper, Sm-doped 24Pb(In1/2Nb1/2)O3-42Pb(Mg1/3Nb2/3)O3-34PbTiO3 (PIN-PMN-PT) transparent ceramic with a high piezoelectric coefficient of 905 pC/N, excellent electro-optical coefficient of 814 pm/V, and high Curie-point of 179 °C is fabricated. Sm doping effect on the phase structures, piezoelectricity, ferroelectricity, optical transparency, electro-optical properties, and thermal stability is systematically investigated. Compared with PMN-PT transparent ceramics, PIN-PMN-PT transparent ceramics exhibit better temperature stability. Electro-optical modulation and energy conversion are achieved using PIN-PMN-PT transparent piezoelectric ceramic, which indicates that it has great potential to develop mechanical-electrical-optical multifunctional coupling devices for optical communication, energy harvesting, photoacoustic imaging, and so on.

Charge transport and acoustic loss in lithium niobate-lithium tantalate solid solutions at temperatures up to 900 °C

Polar oxides, in particular solid solutions of lithium niobate and lithium tantalate (LNT, LiNb1-xTaxO3) are a variable model system to study fundamental materials properties due to miscibility of the edge compounds lithium niobate (LN, LiNbO3) and lithium tantalate (LT, LiTaO3) as well as tunable domain structures. Further new applications in the field of high-temperature actuators are aimed as LNT crystals potentially combine the advantages of the edge compounds with respect to high thermal stability and high piezoelectric coefficients. Beside LN and LT, LNT crystals of two compositions (LiNb0.88Ta0.12O3 and LiNb0.5Ta0.5O3) were grown by the Czochralski technique. Electrical conductivity, lithium diffusion and acoustic loss of LNT at high temperatures were investigated and correlated. Two techniques, namely impedance spectroscopy and resonant piezoelectric spectroscopy (RPS) are applied in this investigation. The electrical conductivity of investigated samples increases linearly in an Arrhenius presentation up to ∼605 °C. After a transition range of 605–620 °C, the conductivity increases linearly again for LT, but the slope is decreased by about 0.15 eV. This indicates that the conductivity below and above the Curie temperature is governed by a slightly different process. In contrast, LN shows a gradually increasing slope in the Arrhenius representation above the transition temperature range mentioned above. Here, a single activation energy cannot be assigned. The increase can be explained by the limited thermal stability of LN at elevated temperatures. Further, the acoustic loss in LNT thickness-shear mode resonators operated at about 2 and 10 MHz is determined by RPS and found to strongly increase above about 450 °C. In addition, the acoustic loss is modelled using independent materials data including electrical conductivity as determined here, and found to be in excellent agreement with the RPS data for the 10 MHz resonator. Based on the modelling, the loss above 450 °C is governed by conductivity-induced piezoelectric/carrier relaxation which can be attributed to lithium migration.

Synthesis and characterization of biphasic layered structure composite with simultaneous electroconductive and piezoelectric behavior as a scaffold for bone tissue engineering

AbstractIn recent years, materials with piezoelectric and electroconductive behavior have been thought interesting and important to be used for bone scaffolds due to their potential in mimicking the bone tissues. In the present work, attempts have been made to prepare three‐dimensional laminated scaffolds by means of embedding the piezoelectric polyvinylidene fluoride (PVDF)/polylactic acid (PLA) electrospun nanofibrous mats into the electroconductive porous oxidized alginate (ADA)/gelatin/polypyrrole‐graft‐gelatin (PPy‐g‐gelatin) hydrogel precursor structure to obtain a biphasic layered structure (a fiber‐hydrogel scaffold). The morphology, tensile strength, β‐phase contents, and crystallinity of the fibers are evaluated. The compressive modulus of the electrospun fiber‐hydrogel composites (32.72 MPa) shows to be much higher than the neat hydrogel (0.01 MPa). The prepared composites present high electrical conductivity (1.8 S m−1) and piezoelectric coefficient (1.61 fC N−1). By incorporating the fibers into the hydrogel structure, the cross‐link density of the composite is increased. The swelling ratio, porosity, and rate of biodegradation of the fabricated composites are also investigated. Moreover, good biocompatibility of human osteosarcoma cells attached to the PVDF/PLA nanofibers‐ADA/gelatin/PPy‐g‐gelatin hydrogel scaffold is evidenced by alkaline phosphatase assay, alizarin red and hematoxylin and eosin staining, and osteogenic gene expression evaluation. The prepared osteon‐mimetic samples with the synergized features of piezoelectricity and electrical conductivity can potentially be used as three‐dimensional scaffolds for bone tissue engineering.

Defected poly(vinylidene fluoride) with enhanced piezoelectricity via liquid crystal small molecules doping

A poly(vinylidene fluoride)-based composite film with higher piezoelectric properties was prepared by the solvent mixing method of adding liquid crystal small molecules to create defects among polyvinylidene fluoride (PVDF) molecular chains. The composite obtained by simple uniaxial stretching and thermal polarization exhibits higher piezoelectric properties (d33 = 29.0 pC/N) than neat PVDF (d33 = 24.3 pC/N). The defects reduce the grain size of PVDF to some extent, thus reducing the coercivity field of PVDF from 64.6 to 58.1 MV/m. This strategy could endow PVDF with higher piezoelectric coefficient and lower polarization field, which is attractive for piezoelectric applications.

A folded π-system with supramolecularly oriented dipoles: single-component piezoelectric relaxor with NLO activity.

Organic molecules with an active dipole moment have a natural propensity to align in an antiparallel fashion in the solid state, resulting in zero macroscopic polarization. This primary limitation makes the material unresponsive to switching with electric fields, mechanical forces, and to intense laser light. A single-component organic material that bestows macroscopic dipole-driven electro-mechanical and optical functions, e.g., piezoelectric, ferroelectric and nonlinear optical (NLO) activity, is unprecedented due to the design challenges imparted by crystal symmetry and dipole orientations. Herein we report a crystalline organic material that self-assembles with a polar order (P 1), and is endowed with a high piezoelectric coefficient (d 33-47 pm V-1), as well as ferroelectric and Debye-type relaxor properties. In addition, it shows second harmonic generation (SHG) activity, which is more than five times that of the benchmark potassium dihydrogen phosphate. Piezoelectric force microscopy (PFM) images validated electro-mechanical deformations. Piezoresponse force spectroscopy (PFS) studies confirmed a signature butterfly-like amplitude and a phase loop. To the best of our knowledge, this is the first report of a folded supramolecular π-system that manifests unidirectionally oriented dipoles and exhibits piezoelectricity, ferroelectricity, and has excellent ability to generate second harmonic light. These findings can herald new design possibilities based on folded architectures to explore opto-, electro- and mechano-responsive multifaceted functions.

Determining AC polarization conditions of ferroelectric materials by dynamic scaling method

Alternating current (AC) polarization can significantly improve electrical and optical performance of ferroelectrics, but there is still no theoretical guidance on how to get the best AC polarization conditions. In this paper, dynamic scaling method is firstly used to the determine optimal AC polarization process, and high piezoelectric coefficients were obtained at a low electric field and a very short time. Results indicate that it is effective not only for Pb-based PMN-PT ceramics, single crystal and PZT ceramics, but also for lead-free BNT-BT ceramics. The dynamic scaling method is expected to provide great support for AC polarization for ferroelectric materials.

Lead-free bimetallic oxide loaded on reduced graphene oxide‒poly(dopamine) hybrid nanocomposite with enhanced crystallinity and piezoelectric performance

The increased demand for electricity with low environmental impact has prompted researchers to find solutions to obtain the maximum output. This effort has imparted a significant focus on piezoelectric materials owing to their high piezoelectric coefficient and electromechanical coupling factor. In this study, reduced graphene oxide encapsulated with polydopamine and incorporated with zinc manganate hybrid nanocomposite (rGO‒pDA‒ZnMnO 3 HNC) was prepared. The as-prepared HNC, of different weight percentages, was blended with 15 wt% poly(vinylidene fluoride) (PVDF) to form different PVDF@rGO‒pDA‒ZnMnO 3(R) thin films. Subsequently, the flexible piezoelectric sensors (FPSs) were fabricated by a solution-casting method. The as-prepared HNC and thin films were characterized by powder X-ray diffraction (PXRD), Fourier transform infrared spectroscopy (FT-IR), field emission scanning electron microscopy (FE-SEM), transmission electron microscopy (TEM), energy-dispersive X-ray analysis (EDX), Raman spectroscopy, and X-ray photoelectron spectroscopy (XPS). The PXRD data revealed the increased degree of crystallinity of the thin films from 54% to 68% with the increase in filler loading. The β-phase of PVDF also increased, as obtained from the FT-IR analysis. Electrical characterization of the prepared FPSs was carried out by estimating the sensitivity of the devices on different loads. The acquired response at a force of 1 N for PVDF@rGO‒pDA‒ZnMnO 3(0.2 wt%) improved by 44% than that of PVDF@rGO‒pDA‒ZnMnO 3(0 wt%) . The force applied by the finger on the device also generated voltages, which were used to charge the capacitor, thereby used to glow the light-emitting diodes with amplifications. These promising results demonstrate the potential for developing lead-free efficient piezoelectric nanogenerators for energy-harvesting applications and self-powered devices.