High Photothermal Efficiency Research Articles

Advancing resource sustainability with green photothermal materials: Insights from organic waste-derived and bioderived sources

Abstract Recently, there has been a surge of interest in developing new types of photothermal materials driven by the ongoing demand for efficient energy conversion, environmental concerns, and the need for sustainable solutions. However, many existing photothermal materials face limitations such as high production costs or narrow absorption bands, hindering their widespread application. In response to these challenges, researchers have redirected their focus toward harnessing the untapped potential of organic waste-derived and bioderived materials. These materials, with photothermal properties derived from their intrinsic composition or transformative processes, offer a sustainable and cost-effective alternative. This review provides an extended categorization of organic waste-derived and bioderived materials based on their origin. Additionally, we investigate the mechanisms underlying the photothermal properties of these materials. Key findings highlight their high photothermal efficiency and versatility in applications such as water and energy harvesting, desalination, biomedical applications, deicing, waste treatment, and environmental remediation. Through their versatile utilization, they demonstrate immense potential in fostering sustainability and support the transition toward a greener and more resilient future. The authors’ perspective on the challenges and potentials of platforms based on these materials is also included, highlighting their immense potential for real-world implementation.

Dual-Mode MXene-Based Phase-Change Composite Towards Enhanced Photothermal Utilization and Excellent Infrared Stealth.

Solar thermal collectors based on phase change materials (PCMs) are important to promote the civilian use of sustainable energy. However, simultaneously achieving high photothermal efficiency and rapid heat transfer of the PCM carrier typically involves a high proportion of functional materials, contradicting a satisfying energy storage density. In this work, a surface-engineered anisotropic MXene-based aerogel (LMXA) integrated with myristic acid (MA) to produce phase change composites (LMXA-MA) is reported, in which the laser-treated surface composed of the hierarchically-structured TiO2/carbon composites act as a light absorber to improve solar absorption (96.0%), while the vertical through-hole structure allows for fast thermal energy transportation from surface to the whole. As a result, LMXA-MA exhibits outstanding thermal energy storage (192.4 J·g-1) and high photothermal conversion efficiency (93.5%). Meanwhile, benefiting from the intrinsic low emissivity of MXene material, thermal radiation loss can be effectively suppressed by simply flipping LMXA-MA, enabling a long-term temperature control ability (605 s·g-1). The excellent heat storage property and switchable dual-mode also endow it with an infrared stealth function, which maintains camouflage for more than 240 s. This work provides a prospective solution for optimizing photothermal conversion efficiency and long-term thermal energy preservation from surface engineering and structural design.

Three-Dimensional Double-Layer Multi-Stage Thermal Management Fabric for Solar Desalination.

Water scarcity is a serious threat to the survival and development of mankind. Interfacial solar steam generation (ISSG) can alleviate the global freshwater shortage by converting sustainable solar power into thermal energy for desalination. ISSG possesses many advantages such as high photothermal efficiency, robust durability, and environmental friendliness. However, conventional evaporators suffered from huge heat losses in the evaporation process due to the lack of efficient thermal management. Herein, hydrophilic Tencel yarn is applied to fabricate a three-dimensional double-layer fabric evaporator (DLE) with efficient multi-stage thermal management. DLE enables multiple solar absorptions, promotes cold evaporation, and optimizes thermal management. The airflow was utilized after structure engineering for enhanced energy evaporation efficiency. The evaporation rate can reach 2.86 kg·m-2·h-1 under 1 sun (1 kW·m-2), and 6.26 kg·m-2·h-1 at a wind speed of 3 m·s-1. After a long duration of outdoor operation, the average daily evaporation rate remains stable at over 8.9 kg·m-2, and the removal rate of metal ions in seawater reaches 99%. Overall, DLE with efficient and durable three-dimensional multi-stage thermal management exhibits excellent practicality for solar desalination.

Spherical Design‐Driven Scalable Solar‐Powered Water Treatment with Salt Self‐Cleaning and Light Self‐Adaptivity

AbstractInterfacial solar evaporation, harnessing sunlight to induce water molecule evaporation, holds great promise for sustainable solar energy conversion. However, challenges such as reduced efficiency and instability due to salt accumulation, inadequate water transport, and the high cost of advanced nanostructured solar evaporators collectively hinder the sustainable and large‐scale practical use of this technology. Herein, an eco‐friendly, floatable 3D solar seawater evaporator is developed by innovatively incorporating a lightweight foam ball enclosed in a porous cellulose hydrogel. The 3D evaporator achieves a high water evaporation rate of ≈2.01 kg m−2 h−1 under 1 Sun, owing to its super high photothermal efficiency of 117.9% and efficient internal water transport channels. Even at a 0° simulated solar angle, the 3D evaporator maintains 85.8% of the evaporation rate at a 90° simulated solar angle. Moreover, the salt self‐cleaning capability is realized by the autonomous rotation caused by salt deposition. Particularly, the 3D evaporator can be fabricated over a large area and maintain seawater evaporation performance and structural integrity for 28 days. This study provides novel economically feasible and sustainable large‐scale solutions for interfacial solar‐powered seawater treatment.

In Situ Pyrolysis of ZIF-67 to Construct Co2N0.67@ZIF-67 for Photocatalytic CO2 Cycloaddition Reaction.

The development of heterogeneous catalysts with abundant active sites is pivotal for enhancing the efficiency of photothermal CO2 conversion. Herein, we report the construction of Co2N0.67@ZIF-67 through the in situ pyrolysis of ZIF-67 under low-temperature pyrolysis conditions. During the pyrolysis process, the crystal structure of ZIF-67 is predominantly preserved concurrently with the formation of Co2N0.67 nanoparticles (NPs) within the ZIF-67 pores. The optimal catalyst Co2N0.67@ZIF-67(450,2) not only possesses high photothermal efficiency but also can efficiently activate CO2. Benefiting from these characteristics, Co2N0.67@ZIF-67(450,2) exhibited significant catalytic activity in the photocatalytic cycloaddition of CO2 and epichlorohydrin. The yield of (chloromethyl)ethylene carbonate reached 95%, which is more than 4 times higher than that of ZIF-67 under visible light irradiation (300 W·m2 Xe lamp, 3 h). This study could offer an alternative approach to enhance the photocatalytic activity of MOFs through low-temperature pyrolysis.

NH2-MXene/OXG nanocomposite hydrogel with efficient photothermal antibacterial activity for potentially removing biofilms

The adhesion of bacteria to the surface leads to formation of biofilms causing numerous infection problems in implanting medical devices or interventional therapy. Traditional treatment for such problems is generally to administrate patients with antibiotics or antifungal agent. Alternatively, devices are taken out of the body to mechanically destroy the biofilm and re-used by surgery. In this study, a straightforward method was developed to remove biofilms using a MXene-based photothermal hydrogel. The hydrogel consists of dynamic crosslinking network formed by Schiff-base reaction between aldehyde-containing xyloglucan (OXG) and amine-containing MXene (NH2-MXene), which showed efficient killing of both gram-positive Staphylococcus aureus (S. aureus) and gram-negative Escherichia coli (E. coli) bacteria upon near-infrared (NIR) laser irradiation. The NH2-MXene/OXG nanocomposite hydrogel showed a high photothermal antibacterial efficiency and stable photothermal conversion, demonstrated by efficient removal of biofilms ex vivo.

Photothermal Enhancement of Prussian Blue Cathodes for Li-Ion Batteries.

Photoenhanced batteries, where light improves the electrochemical performance of batteries, have gained much interest. Recent reports suggest that light-to-heat conversion can also play an important role. In this work, we study Prussian blue analogues (PBAs), which are known to have a high photothermal heating efficiency and can be used as cathodes for Li-ion batteries. PBAs were synthesized directly on a carbon collector electrode and tested under different thermally controlled conditions to show the effect of photothermal heating on battery performance. Our PBA electrodes reach temperatures that are 14% higher than reference electrodes using a blue LED, and a capacity enhancement of 38% was achieved at a current density of 1600 mA g-1. Additionally, these batteries show excellent cycling stability with a capacity retention of 96.6% in dark conditions and 94.8% in light over 100 cycles. Overall, this work shows new insights into the effects leading to improved battery performance in photobatteries.

Nitroreductase-Responsive Fluorescent "Off-On" Photosensitizer for Hypoxic Tumor Imaging and Dual-Modal Therapy.

Photothermal therapy synergized with photodynamic therapy for the treatment of tumors has emerged as a promising strategy. However, designing photosensitizers with both high photothermal efficiency and high photodynamic performance remains challenging. In contrast, the strategy of rationalizing the design of photosensitizers using the physiological properties of tumors to improve the photon utilization of photosensitizers during phototherapy is more advantageous than the approach of endowing a single photosensitizer with complex functions. Herein, we propose a molecular design (CyNP) to convert from photothermal therapy to photodynamic synergistic photothermal therapy based on the prevalent properties of hypoxic tumors. In the normoxic region of tumors, the deactivation pathway of CyNP excited state is mainly the conversion of photon energy to thermal energy; in the hypoxic region of tumors, CyNP is reduced to CyNH by nitroreductase, and the deactivation pathway mainly includes radiation leap, energy transfer between CyNP and oxygen, and conversion of photons energy to heat energy. This strategy enables real-time fluorescence detection of hypoxic tumors, and it also provides dual-mode treatment for photothermal and photodynamic therapy of tumors, achieving good therapeutic effects in vivo tumor treatment. Our study achieves more efficient tumor photoablation and provides a reference for the design ideas of smart photosensitizers.

Gold Nanoparticles-Modified 2D Self-Assembled Amphiphilic Peptide Nanosheets with High Biocompatibility and Photothermal Therapy Efficiency.

Amphiphilic peptides have garnered significant attention due to their highly designable and self-assembling behaviors. Self-assembled peptides hold excellent potential in various fields such as biosensing, environmental monitoring, and drug delivery, owing to their remarkable biological, physical, and chemical properties. While nanomaterials formed by peptide self-assembly have found widespread use in biomedical applications, the development of 2D peptide nanosheets based on the self-assembly of amphiphilic peptides remains challenging in terms of rational design and morphology modulation. In this study, rationally designed amphiphilic peptide molecules are self-assembled into peptide nanosheets (PNS) under specific conditions to encapsulate gold nanoparticles (AuNPs), resulting in the formation of AuNPs/PNS hybrid materials with high photothermal conversion efficiency. The findings demonstrate that 2D PNS enhances the overall photothermal therapy effect of the nanohybrid materials due to their larger hosting area for AuNPs and higher biocompatibility. The well-designed amphiphilic peptides in this study offer insights into the structural design and functional modulation of self-assembled molecules. In addition, the constructed biomimetic-functional 2D inorganic/organic nanohybrid materials hold potential applications in biomedical engineering.

Nanoengineered plasmonics-enhanced photothermal tags for sensitive detection of cardiac biomarker troponin I using lateral flow immunoassay

In recent years, photothermal lateral flow immunoassay (LFIA) has gained widespread use as a point-of-care testing (POCT) technique because of its cost-effective portable instrumentation and easy-to-handle procedures. However, developing a highly sensitive photothermal LFIA platform with high photothermal efficiency remains challenging. In this study, we developed a portable smartphone-based plasmonics-enhanced photothermal LFIA (PPh-LFIA) platform to improve the photothermal LFIA sensitivity by engineering plasmonic-active gold nanostars (GNS) having large-sized sharp branches. We investigated the photothermal effect using various GNS engineered to have different sizes and spike lengths of GNSs (GNS-1, GNS-2, GNS-3, and GNS-4) in order to exhibit optimal plasmonics properties. The results showed that the GNS-3 having a broad plasmon band with a plasmon maximum band at 995 nm exhibited the strongest photothermal efficiency (80 %). As a proof-of demonstration, we have employed GNS-3 for the detection of the cardiac biomarker, troponin I (cTnI), used as the model system. The results show high sensitivity with a detection limit (LOD) of 5.5 pg/mL, which was around 1000 times more sensitive than traditional colorimetric LFIA based on gold nanospheres (GNSP). To verify the applicability of the PPh-LFIA platform, cTnI was spiked into human blood serum samples, enabling the detection of cTnI with an LOD of 6.7 pg/mL. Overall, this study offers insights for nanoengineering and fine-tuning the GNS morphology to increase the photothermal efficiency, consequently improving the PPh-LFIA detection sensitivity, which makes it suitable for use as a sensitive and portable POCT tool.

Sunflower Pollen-Morphology Mimicked Spiky Zinc Nanomotors as a Photosensitizer for Killing Bacteria and Cancer Cells.

Photosensitizing agents have received increased attention from the medical community, owing to their higher photothermal efficiency, induction of hyperthermia, and sustained delivery of bioactive molecules to their targets. Micro/nanorobots can be used as ideal photosensitizing agents by utilizing various physical stimuli for the targeted killing of pathogens (e.g., bacteria) and cancer cells. Herein, we report sunflower-pollen-inspired spiky zinc oxide (s-ZnO)-based nanorobots that effectively kill bacteria and cancer cells under near-infrared (NIR) light irradiation. The as-fabricated s-ZnO was modified with a catechol-containing photothermal agent, polydopamine (PDA), to improve its NIR-responsive properties, followed by the addition of antimicrobial (e.g., tetracycline/TCN) and anticancer (e.g., doxorubicin/DOX) drugs. The fabricated s-ZnO/PDA@Drug nanobots exhibited unique locomotory behavior with an average speed ranging from 13 to 14 μm/s under 2.0 W/cm2 NIR light irradiation. Moreover, the s-ZnO/PDA@TCN nanobots exhibited superior antibacterial activity against E. coli and S. epidermidis under NIR irradiation. The s-ZnO/PDA@DOX nanobots also displayed sufficient reactive oxygen species (ROS) amplification in B16F10 melanoma cells and induced apoptosis under NIR light, indicating their therapeutic efficacy. We hope the sunflower pollen-inspired s-ZnO nanorobots have tremendous potential in biomedical engineering from the phototherapy perspective, with the hope to reduce pathogen infections.

Determination of Photothermal and EMI Shielding Efficiency of Graphene-Silver Nanoparticle Composites Prepared under Low-Dose Gamma Irradiation.

Silver nanoparticles (Ag NPs) have been produced by low-dose (1-20 kGy) gamma irradiation of silver nitrate in the presence of graphene-based material (graphene oxide or electrochemically exfoliated graphene). The large surface area of those graphene-based materials combined with the presence of oxygen-containing functional groups on the surface provided successful nucleation and growth of Ag nanoparticles, which resulted in a uniformly covered graphene surface. The obtained Ag nanoparticles were spherical with a predominant size distribution of 10-50 nm for graphene oxide and 10-100 nm for electrochemically exfoliated graphene. The photothermal efficiency measurement showed a temperature increase upon exposure to a 532 nm laser for all samples and the highest photothermal efficiency was measured for the graphene oxide/Ag NP sample prepared at 5 kGy. Electromagnetic interference (EMI) shielding efficiency measurements showed poor shielding for the composites prepared with graphene oxide. On the other hand, all composites prepared with electrochemically exfoliated graphene showed EMI shielding to some extent, and the best performance was measured for the samples prepared at 5 and 20 kGy doses.

A mitochondria-targeted biocompatible photothermal nanoscale hydrogen-bonded organic framework for effective multimodal-imaging guided breast cancer therapy

Organic small-molecule photothermal agents (smPTAs) have been extensively studied for biomedical applications due to their good biocompatibility comparing with inorganic materials. However, most smPTAs suffer from water insolubility, even organic solvents insolubility, poor bio- and photo-stability, and short blood half-life. Herein, a new type of salinized 4,4′-(benzo[1,2-d:4,5-d']bis(thiazole)-2,6-diyl)dibenzoic acid (BBTDB-Na) smPTA is synthesized via a cyano group of 2-cyano-benzothiazole (CBT)-1,2-aminothiol group of cysteine (Cys) click condensation reaction, and photothermal nanoscale hydrogen-bonded organic frameworks (BT-nHOFs) is further constructed through a facile self-assembly strategy. The prepared BT-nHOFs exhibit a fusiform shape and bisthiazole structure, resulting in good cellular uptake and mitochondrial targeting effects. The well-organized structure of HOFs enables excellent photostability and high photothermal efficiency (51.4 %). Under 808 nm laser irradiation, the BT-nHOFs show favorable photothermal effects on breast cancer cells in vitro and in vivo, indicating that BT-nHOFs can act as a biocompatible PTA candidate for clinical applications. Besides, the fluorescence features, photoacoustic ability, cargo loading capacity of BT-nHOFs furnish multimodal imaging-guided precise photothermal therapy. In summary, this work paves a new way for the development of photothermal HOFs by salinizing insoluble smPTA and demonstrates their great potential for clinical application in phototheranostics.

Flexible Janus Black Silicon Photothermal Conversion Membranes for Highly Efficient Solar-Driven Interfacial Water Purification.

Photothermal conversion materials are critical in the development of solar-driven interfacial evaporation techniques; however, achieving a high energy conversion efficiency remains challenging owing to the high cost and instability of light-absorbing materials, in addition to the difficulties of simultaneously improving light absorption while suppressing heat loss. A black silicon (Si) powder with a porous structure was prepared by chemical etching of a low-cost commercial micron-sized Al-Si alloy, and a flexible Janus black Si photothermal conversion membrane was constructed. The partially broken spherical particles and porous structure obtained after etching enhanced the refraction of light from the Si powder, imparting the prepared membrane with an average light absorption rate of 95.95% over the solar spectrum. Evaporation from the membrane increased the intermediate water content and reduced the equivalent evaporation enthalpy. The thermal conduction loss was inhibited through a one-dimensional water transport structure, and the membrane achieved a water evaporation rate of 2.17 kg m-2 h-1 and a photothermal efficiency of 94.95% under 1 sun illumination. Benefiting from the broadband absorption and high photothermal efficiency of black Si powder, surface modification of hydrophobic polydimethylsiloxane, and directional salt-out structure design, the evaporation rate of the Janus black Si membrane-based system in a 10% NaCl solution was maintained >2.10 kg m-2 h-1 after 7 days of continuous evaporation cycles. The removal rate of metal ions from simulated seawater and from practical wastewater containing complex heavy metals reached >99.9%, indicating the promising potential of black Si membrane for application in solar-driven interfacial water purification.

Novel MoS2/montmorillonite hybrid aerogel encapsulated PEG as composite phase change materials with superior solar-thermal energy harvesting and storage

Phase change materials (PCMs) offer significant advantages in energy conversion and storage by facilitating the storage and release of thermal energy during phase transition processes. However, challenges such as leakage during PCM phase transitions and poor light absorption properties have constrained their application in the field of photothermal energy storage. In this study, Montmorillonite (Mt) and molybdenum disulfide (MoS2) has been used to design and synthesize hybrid aerogels (MoS2/Mt) boasting high mechanical strength and excellent photothermal conversion performance. These aerogels are then used to encapsulate polyethylene glycol (PEG) to prepare composite PCMs with outstanding solar-thermal conversion and storage performances. The results show that the synthesized MoS2/Mt-PEG composite PCMs exhibit high enthalpies of melting and solidification of 169.16 J/g and 170.78 J/g, respectively, while the aerogel supporting material has a high compressive modulus of 1.96 MPa. Moreover, the composite material displayed excellent thermal stability and leakage resistance after undergoing 30 melting-cooling cycles. Furthermore, the incorporation of MoS2 imparted outstanding light absorption properties to the MoS2/Mt-PEG composite, resulting in a high light absorption and photothermal conversion-storage efficiency of 93.4 % and 96.47 %, respectively. Synthesized composite PCMs also demonstrate outstanding performance in solar-thermal-electricity conversion, achieving a voltage output of 458 mV under illumination conditions and maintaining a sustainable voltage output even after removing the light source. Thus, the composite PCMs prepared in this work can meet the requirements of high enthalpy, effective leakage prevention, efficient solar-thermal conversion and solar-thermal-electricity conversion performance, thereby presenting potential applications in practical solar energy collection, conversion, and storage.

An efficient photothermal conversion material based on D‐A type luminophore for solar‐driven desalination

AbstractSolar‐driven interfacial evaporation is a promising technology for desalination. The photothermal conversion materials are at the core and play a key role in this field. Design of photothermal conversion materials based on organic dyes for desalination is still a challenge due to lack of efficient guiding strategy. Herein, a new D (donor)‐A (acceptor) type conjugated tetraphenylpyrazine (TPP) luminophore (namely TPP‐2IND) was prepared as a photothermal conversion molecule. It exhibited a broad absorption spectrum and strong π–π stacking in the solid state, resulting in efficient sunlight harvesting and boosting nonradiative decay. TPP‐2IND powder exhibited high photothermal efficiency upon 660 nm laser irradiation (0.9 W cm−2), and the surface temperature can reach to 200°C. Then, an interfacial heating system based on TPP‐2IND is established successfully. The water evaporation rate and the solar‐driven water evaporation efficiency were evaluated up to 1.04 kg m−2 h−1 and 65.8% under 1 sunlight, respectively. Thus, this novel solar‐driven heating system shows high potential for desalination and stimulates the development of advanced photothermal conversion materials.

A coal-based multifunctional membrane for solar-driven seawater desalination and power generation

Water evaporation systems driven by solar energy delivers great potential for seawater desalination and sustainable energy generation, which is of great significance to relieve the worldwide shortage of fresh-water and energy. However, the achievement of well-designed materials and configuration for water evaporation systems remains a great challenge, hindering the realization of high evaporation rates and stable energy output. Herein, conductive coal-based nanocarbon material was creatively fabricated to assemble a novel multifunctional membrane based evaporation system for simultaneous solar thermal desalination of seawater and power generation. The coal-based multifunctional membrane (CBMM) possesses a permanently asymmetric wetting structure, which can ensure high photothermal evaporation efficiency and stable energy output. The constructed device unit demonstrate a long and stable operation in seawater under one sun irradiance for 100 h, achieving a high evaporation rate of 1.81 kg m−2 h−1 and a large voltage output of 410 mV. Especially, multiple units of the devices can be easily connected in series or parallel to power small electronic devices. This work provides a cost-effective and large scale method for the fabrication of coal-based nanomaterials and the creative application in high-perforamnce water evaporation systems for seawater desalination and sustainable energy generation.

Metal-Organic-Framework-Derived Bromine and Nitrogen Dual-Doped Porous Carbon for CO2 Photocycloaddition Reaction.

The cycloaddition of CO2 with epoxides driven by light irradiation is an intriguing approach to preparing cyclic carbonates. However, it remains a great challenge to achieve high photocatalytic efficiency in the absence of a cocatalyst. Herein, we explored a metal-organic-framework (MOF)-templated pyrolysis strategy to prepare uniform bromine ions/nitrogen-codoped carbon materials (Br-CN) as low-cost photocatalysts for CO2 cycloaddition. The optimal catalyst Br-CN-1-550 can be used as a photocatalyst to catalyze CO2 cycloaddition, remarkably reducing the energy consumption. As a result of its benefits of high photothermal efficiency and rich nucleophilic sites (Br ions), BN-CN-1-550 affords a 9 times higher yield of 4-(chloromethyl)-1,3-dioxolan-2-one than that of the ZIF-8-derived CN under cocatalyst-free conditions and light irradiation (300 mW·cm-2 full-spectrum irradiation, 10 h). This strategy provides a cost-effective way to obtain cyclic carbonate under cocatalyst-free conditions.

Reversible thermochromic and heat storage coating for adaptive de/anti-icing and thermal regulation

In recent years, photothermal coatings have attracted researchers much attentions for anti-icing applications. However, the overheating due photothermal effect at midday or in non-icing period is inevitably encountered and results in the speed-up aging of the coatings. Herein, a reversible thermochromic phase-transition heat storage coating (TCHSC) containing thermochromic microcapsules is designed to adjust photothermal efficiency by discoloration during non-icing period. In cold surroundings, the coating surface shows black color and presents a high photothermal efficiency, which can transform solar energy into heat for anti-icing and de-icing effectively. Yet, the color of coating turns to white spontaneously in hot surroundings with a low photothermal generation efficiency, which avoids the overheating of coating. Besides, discoloration is caused by forming unconjuncted structure in thermochromic dye, and meanwhile the heat is stored during phase transition process of dye, which helps to adjust the temperature rising and cooling rate of coating and contributes to de/anti-icing. What’s more, discoloration temperature of thermochromic capsules can be tuned by adjusting the melting point of dye in thermochromic capsules. The TCHSC with heat regulation provides a new strategy to tackle the conventional overheating issue of photothermal anti-icing coating in summer or at midday, paving a key step towards its real applications.

Theranostic Phthalocyanine and Naphthalocyanine Nanoparticles for Photoacoustic Imaging and Photothermal Therapy of Tumors.

Background: Phthalocyanine (PC) and naphthalocyanine (NC) dyes have long garnered interest as theranostic agents for optical imaging and phototherapy due to their near-infrared absorbance, photostability, imaging contrast, and proven safety in clinical trials. Yet, only a small fraction of these dyes has been evaluated as photothermal therapy (PTT) agents for cancer treatment. Methods: Nearly 40 distinct NC and PC dyes were encapsulated within polymeric PEG-PCL micelles via oil-in-water emulsions. The optimal NC/PC-loaded micelle formulations for PTT and photoacoustic (PA) imaging were identified through in vivo and in vitro studies. Results: The most promising candidate, CuNC(Octa)-loaded micelles, demonstrated a strong PA signal with a peak absorbance at ~870 nm, high photothermal efficiency, and photostability. The CuNC(Octa)-loaded micelles exhibited heat generation as good or better than gold nanorods/nanoshells and >10-fold higher photoacoustic signals. Micelle preparation was reproducible/scalable, and the CuNC(Octa)-loaded micelles are highly stable under physiological conditions. The CuNC(Octa)-loaded micelles localize within tumors via enhanced permeability and retention and are readily detectable by PA imaging. In a syngeneic murine tumor model of triple-negative breast cancer, CuNC(Octa)-loaded micelles demonstrate efficient heat generation with PTT, leading to the complete eradication of tumors. Conclusions: CuNC(Octa)-loaded micelles represent a promising theranostic agent for PA imaging and PTT. The ability to utilize conventional ultrasound in combination with PA imaging enables the simultaneous acquisition of information about tumor morphology and micelle accumulation. PTT with CuNC(Octa)-loaded micelles can lead to the complete eradication of highly invasive tumors.