High Phase Sensitivity Research Articles

Single-shot quantitative differential phase contrast microscope using a single calcite beam displacer

This paper presents the development of a single-shot, partially spatially coherent quantitative differential phase contrast microscopy (Q-DPCM) system. The optical scheme comprises a polarizer, lenses, calcite beam displacer, and analyzer, which can be seamlessly integrated to an existing bright-field microscopy system, transforming it into a Q-DPCM system. It utilizes a partially spatially coherent light source, enabling single-shot quantitative differential phase recovery of the specimens with high spatial phase sensitivity. It generates highly sensitive quantitative differential phase images of the specimens along one direction, like a gradient light interference microscopy (GLIM) system, using only a single interferogram. First, we validated the differential phase measurement capability of the system through experiments on polystyrene spheres (diameter 5.2 µm) and HeLa cells. Next, the system is utilized to generate quantitative phase maps of human red blood cells using two orthogonal differential interferograms recorded at two orientations of the calcite beam displacer. Further, the Q-DPCM system is implemented for 1-h time-lapse live cell monitoring, revealing the dynamics of intracellular granules such as nucleolus and lipids in U2OS cells.

Noise mitigation for high-sensitivity phase estimation based on weak measurements

Noise mitigation for high-sensitivity phase estimation based on weak measurements

Design of a Talbot phase-contrast microscopy imaging system with a digital detector for laser-driven X-ray backlighter sources

Laser-driven shock waves in matter propagate with multiple kilometers per second and therefore require sources like a laser-driven backlighter, which emit the X-rays within picoseconds, to be able to capture sharp images. The small spatial extent of shocks in low-density materials pose challenges on the imaging setup. In this work, we present a design process for a single-shot X-ray phase-contrast imaging system geared towards these objects, consisting of a two-grating Talbot interferometer and a digital X-ray detector. This imaging system is optimized with respect to the detectable refraction angle of the X-rays induced by an object, which implies a high phase sensitivity. Therefore, an optimization parameter is defined that considers experimental constraints such as the limited number of photons, the required magnification, the size and spectrum of the X-ray source, and the visibility of the moiré fringes. In this way, a large parameter space is sampled and a suitable imaging system is chosen. During a campaign at the PHELIX high-power laser facility a static test sample was imaged which is used to benchmark the optimization process and the imaging system under real conditions. The results show good agreement with the predicted performance, which demonstrates the reliability of the presented design process. Likewise, the process can be adapted to other types of laser experiments or X-ray sources and is not limited to the application presented here.

High space–time bandwidth product imaging in low coherence quantitative phase microscopy

Current low coherence quantitative phase microscopy (LC-QPM) systems suffer from either reduced field of view (FoV) or reduced temporal resolution due to the short temporal coherence (TC) length of the light source. Here, we propose a hybrid, experimental and numerical approach to address this core problem associated with LC-QPM. We demonstrate high spatial resolution and high phase sensitivity in LC-QPM at high temporal resolution. High space–time bandwidth product is achieved by employing incoherent light source for sample illumination in QPM to increase the spatial resolution and single-shot Hilbert spiral transform (HST) based phase recovery algorithm to enhance the temporal resolution without sacrificing spatial resolution during the reconstruction steps. The high spatial phase sensitivity comes by default due to the use of incoherent light source in QPM which has low temporal coherence length and does not generate speckle noise and coherent noise. The spatial resolution achieved by the HST is slightly inferior to the temporal phase-shifting (TPS) method when tested on a specimen but surpasses that of the single-shot Fourier transform (FT) based phase recovery method. Contrary to HST method, FT method requires high density fringes for lossless phase recovery, which is difficult to achieve in LC-QPM over entire FoV. Consequently, integration of HST algorithm with LC-QPM system makes an attractive route. Here, we demonstrate scalable FoV and resolution in single-shot LC-QPM and experimentally corroborate it on a test object and on both live and fixed biological specimen such as MEF, U2OS and human red blood cells (RBCs). LC-QPM system with HST reconstruction offer high-speed single-shot QPM imaging at high phase sensitivity and high spatial resolution enabling us to study sub-cellular dynamic inside U2OS for extended duration (3 h) and observe high-speed (50 fps) dynamics of human RBCs. The experimental results validate the effectiveness of the present approach and will open new avenues in the domain of biomedical imaging in the future.

Full-range depth-encoded swept source polarization sensitive optical coherence tomography.

To realize the high sensitivity polarization sensitive optical coherence tomography (PS-OCT) imaging, a fiber-based full-range depth-encoded swept source PS-OCT (SS-PS-OCT) method is proposed. The two OCT images corresponding to the orthogonal polarized input light are located on the high sensitivity imaging region of the opposite sides relative to the zero optical path difference position. The full-range OCT images can be obtained by implementing the spatial phase modulation in the reference arm. The detection sensitivity of the system was measured experimentally to be 67 dB when the imaging depth approaching to 2 mm. The imaging of the biological tissue verifies that the proposed full-range depth-encoded SS-PS-OCT system has the higher detection sensitivity compared with the conventional depth encoded SS-PS-OCT system. Finally, we demonstrated the full-range high sensitivity phase retardation image of the bovine tendon and skin of human fingertip. The fiber-based full-range depth-encoded SS-PS-OCT method can realize the high sensitivity birefringence imaging in the medical diagnosis scenes with the requirements for long imaging range and high detection sensitivity.

Electronic frequency shifting enables long, variable working distance optical coherence tomography.

Increased imaging range is of growing interest in many applications of optical coherence tomography to reduce constraints on sample location, size, and topography. The design of optical coherence tomography systems with sufficient imaging range (e.g., 10s of centimeters) is a significant challenge due to the direct link between imaging range and acquisition bandwidth. We have developed a novel and flexible method to extend the imaging range in optical coherence tomography using electronic frequency shifting, enabling imaging in dynamic environments. In our approach, a laser with a quasi-linear sweep is used to limit the interferometric bandwidth, enabling decoupling of imaging range and acquisition bandwidth, while a tunable lens allows dynamic refocusing in the sample arm. Electronic frequency shifting then removes the need for high frequency digitization. This strategy is demonstrated to achieve high contrast morphological imaging over a > 21 cm working distance range, while maintaining high resolution and phase sensitivity. The system design is flexible to the application while requiring only a simple phase correction in post-processing. By implementing this approach in an auto-focusing paradigm, the proposed method demonstrates strong potential for the translation of optical coherence tomography into emerging applications requiring variable and centimeter-scale imaging ranges.

High-sensitivity phase imaging eddy current magneto-optical system for carbon fiber reinforced polymers detection

This paper proposed a high-sensitivity phase imaging eddy current magneto-optical (PI-ECMO) system for carbon fiber reinforced polymer (CFRP) defect detection. In contrast to other eddy current-based detection systems, the proposed system employs a fixed position excitation coil while enabling the detection point to move within the detection region. This configuration effectively mitigates the interference caused by the lift-off effect, which is commonly observed in systems with moving excitation coils. Correspondingly, the relationship between the defect characteristics (orientation and position) and the surface vertical magnetic field distribution (amplitude and phase) is studied in detail by theoretical analysis and numerical simulations. Experiments conducted on woven CFRP plates demonstrate that the designed PI-ECMO system is capable of effectively detecting both surface and internal cracks, as well as impact defects. The excitation current is significantly reduced compared with traditional eddy current magneto-optical (ECMO) systems.

Reconstruction of Angstrom resolution exit-waves by the application of drift-corrected phase-shifting off-axis electron holography

Phase-shifting electron holography is an excellent method to reveal electron wave phase information with very high phase sensitivity over a large range of spatial frequencies. It circumvents the limiting trade-off between fringe spacing and visibility of standard off-axis holography. Previous implementations have been limited by the independent drift of biprism and sample. We demonstrate here an advanced drift correction scheme for the hologram series that exploits the presence of an interface of the TEM specimen to the vacuum area in the hologram. It allows to obtain reliable phase information up to 2π/452 at the 1 Å information limit of the Titan 80–300 kV environmental transmission electron microscope used, by applying a moderate voltage of 250 V to a single biprism for a fringe spacing of 1 Å. The obtained phase and amplitude information is validated at a thin Pt sample by use of multislice image simulation with the frozen lattice approximation and shows excellent agreement. The presented method is applicable in any TEM equipped with at least one electron biprism and thus enables achieving high resolution off-axis holography in various instruments including those for in-situ applications. A software implementation for the acquisition, calibration and reconstruction is provided.

Multipass wide-field phase imager.

Advances in optical imaging always look for an increase in sensitivity and resolution among other practicability aspects. Within the same scope, in this work we report a versatile interference contrast imaging technique, with high phase sensitivity and a large field-of-view of several mm2. Sensitivity is increased through the use of a self-imaging non-resonant cavity, which causes photons to probe the sample in multiple rounds before being detected, where the configuration can be transmissive or reflective. Phase profiles can be resolved individually for each round thanks to a specially designed single-photon camera with time-of-flight capabilities and true pixels-off gating. Measurement noise is reduced by novel data processing combining the retrieved sample profiles from multiple rounds. Our protocol is especially useful under extremely low light conditions as required by biological or photo-sensitive samples. Results demonstrate more than a four-fold reduction in phase measurement noise, compared to single round imaging, and values close to the predicted sensitivity in case of the best possible cavity configuration, where all photons are maintained until n rounds. We also find good agreement with the theoretical predictions for low number of rounds, where experimental imperfections would play a minor role. The absence of a laser or cavity lock-in mechanism makes the technique an easy to use inspection tool.

Investigation of the composition, structure and magnetic properties of the Nd2Fe14B ceramics dependence on the initial powder characteristics and spark plasma sintering modes

High phase and structural sensitivity of magnetic properties strongly impacts the fabrication quality of the permanent magnets, therefore revealing effects of synthesis conditions on physico-chemical characteristics of magnetic materials is of paramount importance for optimization of magnet production especially in case when non-conventional techniques are involved. Here we report for the influence of pulse current frequency on structure, composition, and magnetic properties of an industrially-important Nd2Fe14B magnetic ceramics on the initial powder characteristics and the modes of its spark plasma sintering (SPS) in a vacuum environment. The influence of initial powder mechanical grinding as well as the number of generated electric current pulses (in the range from 3.3 to 326.7 ms) in SPS conditions on the structure (defects and pores formation, grain size), phase and element composition (formation of secondary nonmagnetic phases and oxides, impurities) of Nd2Fe14B alloy was studied by SEM, TEM, EDS and XRD methods. The regularity of changes in the magnetization saturation value (σ) and coercive force (Нс) depending on the morphology, structure and composition of the initial Nd2Fe14B powder and the alloy obtained by mechanical milling and subsequent sintering at different modes of pulse current has been established.

Understanding the microstructure of a core–shell anode catalyst layer for polymer electrolyte water electrolysis

Reducing precious metal loading in the anodic catalyst layer (CL) is indispensable for lowering capital costs and enabling the widespread adoption of polymer electrolyte water electrolysis. This work presents the first three-dimensional reconstruction of a TiO2-supported IrO2 based core shell CL (3 mgIrO2/cm2), using high-resolution X-ray ptychographic tomography at cryogenic temperature of 90 K. The high data quality and phase sensitivity of the technique have allowed the reconstruction of all four phases namely pore space, IrO2, TiO2 support matrix and the ionomer network, the latter of which has proven to be a challenge in the past. Results show that the IrO2 forms thin nanoporous shells around the TiO2 particles and that the ionomer has a non-uniform thickness and partially covers the catalyst. The TiO2 particles do not form a percolating network while all other phases have high connectivity. The analysis of the CL ionic and electronic conductivity shows that for a dry CL, the ionic conductivity is orders of magnitudes lower than the electronic conductivity. Varying the electronic conductivity of the support phase by simulations, reveals that the conductivity of the support does not have a considerable impact on the overall CL electrical conductivity.

Reflectional quantitative differential phase microscopy using polarized wavefront phase modulation.

Quantitative phase microscopy (QPM), as a label-free and nondestructive technique, has been playing an indispensable tool in biomedical imaging and industrial inspection. Herein, we introduce a reflectional quantitative differential phase microscopy (termed RQDPM) based on polarized wavefront phase modulation and partially coherent full-aperture illumination, which has high spatial resolution and spatio-temporal phase sensitivity and is applicable to opaque surfaces and turbid biological specimens. RQDPM does not require additional polarized devices and can be easily switched from reflectional mode to transmission mode. In addition, RQDPM inherits the characteristic of high axial resolution of differential interference contrast microscope, thereby providing topography for opaque surfaces. We experimentally demonstrate the reflectional phase imaging ability of RQDPM with several samples: semiconductor wafer, thick biological tissues, red blood cells, and Hela cells. Furthermore, we dynamically monitor the flow state of microspheres in a self-built microfluidic channel by using RQDPM converted into the transmission mode.

Multiplex microdisk biosensor based on simultaneous intensity and phase detection.

Future healthcare and precision medicine require multiplex and reliable biosensors. Here we present a compact photonic crystal based microdisk biosensor that is designed for simultaneous intensity and phase measurements of multiple biomarkers in parallel. The combination of two different measurement approaches has a range of advantages. Phase detection has higher signal to noise ratios, while intensity measurement helps to align the sensor to high phase sensitivities and increase the reliability. The performance of the microdisk biosensor system is examined by simulations and measurements. For proof of concept, parallel intensity and phase shifts are measured upon binding of human-alpha-thrombin and streptavidin.

INTERFEROMETRIC PROCESSING OF A DEVELOPED MIMO GBSAR FOR DISPLACEMENT MONITORING

Abstract. This study demonstrates the interferometric processing experiments of our developed multiple-input multiple-output ground-based synthetic aperture radar (MIMO GBSAR) system. GBSAR systems are known as precise noncontact instruments for monitoring earth dynamics. In recent years W band MIMO radars have shown interesting potential in this field due to their low cost, compact size, and high phase sensitivity. MIMO capability enables the angular discrimination of multiple targets in the same range as the radar sensor. In our previous works, we developed a high-resolution MIMO GBSAR system based on the combination of MIMO radar and mechanical rail. Accordingly, this study investigates the developed system’s displacement monitoring capability by presenting a controlled experiment, using fixed and moving corner reflectors and gathering 36 time series of data. We compare and discuss the results obtained from MIMO GBSAR and MIMO radar configurations. The results show that our developed system highly agrees with MIMO radar’s interferometric measurements while providing a better target discrimination capability and higher signal noise ratio.

Precision Magnetic Field Sensing with Dual Multi-Wave Atom Interferometer.

Precision magnetic field measurement is widely used for practical applications, fundamental research, and medical purposes, etc. We propose a novel quantum magnetometer based on atoms' multi-wave (3-wave and 5-wave) Ramsey interference. Our design features high phase sensitivity and can be applied to in situ measurements of the magnetic field inside vacuum chambers. The final state detection is designed to be achieved by Raman's two-photon transition. The analytical solution for applicable interference fringe is presented. Fringe contrast decay due to atom temperature and magnetic field gradient is simulated to estimate reasonable experimental conditions. Sensitivity functions for phase noise and magnetic field noise in a multi-wave system are derived to estimate the noise level required to reach the expected resolution. The validity of the model, dual-channel features on bias estimation, and the quasi-non-destructive detection feature are discussed.

Phase-shifted demodulation scheme for fiber-optic interferometric sensors with combined waveform phase modulation

We propose and demonstrate a demodulation scheme for interferometric optical fiber sensing using combined waveform phase modulation. The method is based on a designed combined waveform and time-division separation technology, which moves the target signal to the sidebands of the carrier signal and eliminates the influence of residual direct current (DC) term and low-frequency intensity noise by filtering the detector signal directly. The effect of the modulation-to-target ratio (MTR) defined as the ratio of the modulation frequency to the target frequency on the demodulation results is also discussed. Both simulations and experiments verify the ability to obtain a pair of quadrature signals. The experimental results indicate that the phase resolution of the system is 1.1 × 10−6 rad/√Hz@2 kHz when the MTR is 625, and 5 × 10−6 rad/√Hz@2 kHz when the MTR is 25, while demonstrating excellent demodulation consistency. This work not only has the advantages of carrier modulation methods, but also does not need to generate analog signals for mixing, which provides guidance for high-sensitivity phase demodulation technology.

The High-Sensitivity Phase Interrogation of Bloch Surface Wave Sensor Based on 1-D Photonic Crystal

The Bloch surface wave (BSW) is excited in a 1-D photonic crystal and supports a rather steep resonance dip, much sharper than that of traditional surface plasmon resonance (SPR). A highly sensitive sensor based on BSW was fabricated by electron beam evaporation, the structure was characterized by scanning electron microscopy (SEM) and ellipsometry spectrometer, and the sensitivity in wavelength and phase interrogation was achieved experimentally by an optical system based on a Mach–Zehnder interferometer. The wavelength sensitivity and the phase sensitivity can reach 219 nm/RIU and <inline-formula xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink"> <tex-math notation="LaTeX">$1.16\times10$ </tex-math></inline-formula> 4 deg/RIU, respectively. After comparison, we demonstrate that the phase interrogation has a higher sensitivity than the wavelength interrogation and is more suitable for BSW sensors. Experimental results show that the detection limit of the sensor is <inline-formula xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink"> <tex-math notation="LaTeX">$8.62\times10$ </tex-math></inline-formula> −7 RIU in phase interrogation, which proves that the sensor could become a valuable and promising tool to replace traditional SPR sensors for the application of ultralow concentration detection. This sensor, only composed of TiO2 and SiO2 materials, has the advantages of mechanical and chemical stability, easy fabrication, and low cost, which can be used as an alternative to traditional SPR sensors in the fields of biomedicine, chemical analysis, and environmental monitoring.

Large field‐of‐view holographic imager with ultra‐high phase sensitivity using multi‐angle illumination

Quantitative phase imaging and holography allow highly sensitive detection of phase changes, for example of surface non-uniformities or refractive index (RI) structures in the volume of a sample. For many applications, wide field-of-view (FoV) and high phase sensitivity are required. Lens-free interferometric microscopy can operate over a wide FoV and volume, but with the drawbacks of low axial resolution and poor optical sectioning, which comes with increased noise from out-of-focus planes. In this work, we propose and demonstrate a novel implementation of lens-free phase imaging with phase-shifting interferometry and multi-angle illumination that enhances axial resolution and image quality, enabling ultra-high phase sensitivity with optical path difference (OPD) background root-mean-square (RMS) noise of 0.2 nm, while operating over a wide FoV (>10 mm²). As a prototypical application, we demonstrate imaging of 10 nm thin transparent glass structures, and of 3D laser-written structures of RI modifications in glass over a large volume (>10 mm³), where the location of features along the z-axis can be determined with 3x higher accuracy compared to an on-axis illumination. The technology is particularly suitable for large-scale analysis and characterization of structures on the surface or embedded in transparent materials.

Continuous-Frequency Microwave Heterodyne Detection in an Atomic Vapor Cell

Atomic heterodyne dressed by a local oscillator resonant with Rydberg transitions allows high sensitivity and robust phase measurement of a microwave electric field, but it is typically limited to detection of discrete frequencies within the narrow bandwidth of Rydberg transitions. Here we demonstrate an atomic heterodyne scheme for continuous-frequency electric field measurement based on multilevel Rydberg atoms in a room-temperature vapor cell. Driven by two off-resonant microwaves acting as a tunable local oscillator field, the heterodyne receiver can retrieve the amplitude, phase, and frequency information of signal microwave in a continuous frequency band. In our experiment, the receiver achieves an electric field sensitivity of up to $1.5\phantom{\rule{0.2em}{0ex}}\ensuremath{\mu}\mathrm{V}\phantom{\rule{0.2em}{0ex}}{\mathrm{cm}}^{\ensuremath{-}1}\phantom{\rule{0.2em}{0ex}}{\mathrm{Hz}}^{\ensuremath{-}1/2}$, 80-dB linear dynamic range, and over 1 GHz of continuous frequency range. We also demonstrate the reliable reception of continuously tunable phase-modulated carriers in the digital communication. This work will facilitate the application of atomic heterodyne in the areas such as radar technique, radio monitoring, and radio astronomy.

Ultrafast and hypersensitive phase imaging of propagating internodal current flows in myelinated axons and electromagnetic pulses in dielectrics

Many ultrafast phenomena in biology and physics are fundamental to our scientific understanding but have not yet been visualized owing to the extreme speed and sensitivity requirements in imaging modalities. Two examples are the propagation of passive current flows through myelinated axons and electromagnetic pulses through dielectrics, which are both key to information processing in living organisms and electronic devices. Here, we demonstrate differentially enhanced compressed ultrafast photography (Diff-CUP) to directly visualize propagations of passive current flows at approximately 100 m/s along internodes, i.e., continuous myelinated axons between nodes of Ranvier, from Xenopus laevis sciatic nerves and of electromagnetic pulses at approximately 5 × 107 m/s through lithium niobate. The spatiotemporal dynamics of both propagation processes are consistent with the results from computational models, demonstrating that Diff-CUP can span these two extreme timescales while maintaining high phase sensitivity. With its ultrahigh speed (picosecond resolution), high sensitivity, and noninvasiveness, Diff-CUP provides a powerful tool for investigating ultrafast biological and physical phenomena.