High-performance Photodetectors Research Articles

Highly-Polarized Solar-Blind Ultraviolet Organic Photodetectors.

Developing high-performance polarization-sensitive ultraviolet photodetectors is crucial for their application in military remote sensing, detection, bio-inspired navigation, and machine vision. However, the significant absorption in the visible light range severely limits the application of polarization-sensitive ultraviolet photodetectors, such as high-quality anti-interference imaging. Here, based on a wide-bandgap organic semiconductor single crystal (trans-1,2-bis(5-phenyldithieno[2,3-b:3',2'-d]thiophen-2-yl)ethene, BPTTE), high-performance polarization-sensitive solar-blind ultraviolet photodetectors with a dichroic ratio close to 4.26 are demonstrated. The strong anisotropy of two-dimensional grown BPTTE single crystals in molecular vibration and optical absorption has been characterized by various techniques. Under voltage modulation, stable and efficient detection of polarized light has been demonstrated, attributed to the intrinsic anisotropy of transition dipole moment in the bc crystal plane, rather than other factors. In final, high-contrast polarimetric imaging and anti-interference imaging are successfully demonstrated based on BPTTE single crystal photodetectors, highlighting the potential of organic semiconductors for polarization-sensitive solar-blind ultraviolet photodetectors. This article is protected by copyright. All rights reserved.

Two-Step Laser Ablation for the Synthesis of Au:Pb Core/Shell NPs for a High-Performance Silicon-Based Heterojunction Photodetector

Two-Step Laser Ablation for the Synthesis of Au:Pb Core/Shell NPs for a High-Performance Silicon-Based Heterojunction Photodetector

Design and simulation of a high performance Ag3CuS2 jalpaite-based photodetector

This work provides a comprehensive investigation by using simulations and performance analysis of a high performance and narrowband Ag3CuS2 photodetector (PD) that operates in the near-infrared (NIR) region and is built using WS2 and BaSi2 semiconductors. Across its operational wavelength range, a comprehensive assessment of the device's electrical and optical properties such as photocurrent, open-circuit voltage, quantum efficiency, responsivity and detectivity is methodically carried out. Furthermore, a thorough investigation has been conducted into the impact of many parameters, including width, carrier density and defects of various layers. Also, the intricate interactions between WS2/Ag3CuS2 and Ag3CuS2/BaSi2 interface properties of the photodetector are explored. The Ag3CuS2-based PD remarkably produces the best outcomes with an open-circuit voltage of 0.74 V, current of 43.79 mA/cm2, responsivity of 0.79 AW-1 and detectivity of 4.73 × 1014 Jones and over 90 % QE in the NIR range for the Ag3CuS2 PD. The results showcase this jalpaite material as a promising one in the field of PD.

Hybrid mode for absorption enhancement in the Ga2O3 nanocavity photodetector with grating electrodes

Gallium oxide (Ga2O3) photodetectors have drawn increased interest for their widespread applications ranging from military to civil. Due to the inherent oxygen vacancy defects, they seriously suffer from trade-offs that make them incompetent for high-responsivity, quick-response detection. Herein, a Ga2O3 nanocavity photodetector assisted with grating electrodes is designed to break the constraint. The proposed structure supports both the plasmonic mode and the Fabry–Perot (F-P) mode. Numerical calculations show that the absorption of 99.8% is realized for ultra-thin Ga2O3 (30 nm), corresponding to a responsivity of 12.35 A/W. Benefiting from optical mechanisms, the external quantum efficiency (EQE) reaches 6040%, which is 466 times higher than that of bare Ga2O3 film. Furthermore, the proposed photodetector achieves a polarization-dependent dichroism ratio of 9.1, enabling polarization photodetection. The grating electrodes also effectively reduce the transit time of the photo-generated carriers. Our work provides a sophisticated platform for developing high-performance Ga2O3 photodetectors with the advantages of simplified fabrication processes and multidimensional detection.

Graphene-enhanced lateral photovoltaic effect observed in the Ag nanoparticle-covered graphene/n-type silicon

Graphene is a kind of two-dimensional material with a single-layer carbon structure and has been investigated in many high-performance photodetectors. The lateral photovoltaic effect (LPE) is widely used in the position-sensitive detectors (PSDs) owing to its linear response of photovoltage to the light position. In this Letter, a type of graphene-enhanced LPE is observed in the Ag nanoparticle-covered graphene/n-type Si. The LPE sensitivity can reach 97.3 mV/mm, much higher than the sensitivity of 1.3 mV/mm in the control sample of Ag/Si and 5.2 mV/mm of graphene/Si. Based on the photocarriers’ diffusion mechanism, tailoring a photocarrier transfer at the interface of a heterojunction plays a key role for the enhancement. These findings exhibit great application potential of graphene in the field of PSDs and offer an effective method for the optimization of LPE devices.

Demonstration of a 3D-Assembled Dual-Mode Photodetector Based on Tubular Graphene/III-V Semiconductors Heterostructure and Coplanar Three Electrodes.

3D assembly technology is a cutting-edge methodology for constructing high-performance and multifunctional photodetectors since some attractive photodetection features such as light trapping effect, omnidirectional ability, and high spatial resolution can be introduced. However, there has not been any report of 3D-assembled multimode photodetectors owing to the lack of design and fabrication guideline of electrodes serving for 3D heterostructures. In this study, a 3D-assembled dual-mode photodetector (3DdmPD) was realized successfully via the clever electrical contact between the rolled-up tubular graphene/GaAs/InGaAs heterostructure and planar metal electrode. Arbitrary switching of three coplanar electrodes makes the as-fabricated tubular 3D photodetector work at the unbiased photodiode mode, which is suitable for energy conservation high-speed photodetection, or the biased photoconductive mode, which favors extremely weak light photodetection, fully showing the advantages of multifunctional detection. In more detail, the Ilight/Idark ratio reached as high as 2 × 104, and a responsivity of 42.3 mA/W, a detectivity of 1.5 × 1010 Jones, as well as a rising/falling time (τr/τf) of 360/370 μs were achieved under the self-driven photodiode mode. Excitingly, 3DdmPD shows omnidirectional photodetection ability at the same time. When 3DdmPD works at the photoconductive mode with 5 V bias, its responsivity is extremely high as 7.9 × 104 A/W and corresponding detectivity is increased to 1.0 × 1011 Jones. Benefiting from the totally independent coplanar electrodes, 3DdmPD is much more easily integrated as arrays that are expected to offer the function of high-speed omnidirectional image-sensing with ultralow power consumption than the planar counterparts which share communal bottom electrodes. We believe that our work can contribute to the progress of 3D-assembled optoelectronic devices.

2D–3D heterostructure of PtS2−x /Ga2O3 and their band alignment studies for high performance and broadband photodetector

For deep ultraviolet (UV-C) photodetectors, gallium oxide (Ga2O3) is a suitable candidate owing to its intrinsic ultra-wide band gap and high stability. However, its detection is limited within the UV-C region, which restricts it to cover a broad range, especially in visible and near-infrared (NIR) region. Therefore, constructing a heterostructure of Ga2O3 with an appropriate material having a narrow band gap is a worthwhile approach to compensate for it. In this category, PtS2 group-10 transitional metal dichalcogenide stands at the top owing to its narrow band gap (0.25–1.65 eV), high mobility, and stability for heterostructure synthesis. Moreover, heterostructure with Ga2O3 sensing in UV and PtS2 broad response in visible and IR range can broaden the spectrum from UV to NIR and to build broadband photodetector. In this work, we fabricated a 2D–3D PtS2−x /Ga2O3 heterostructure based broadband photodetector with detection from UV-C to NIR region. In addition, the PtS2−x /Ga2O3 device shows a high responsivity of 38.7 AW−1 and detectivity of 4.8 × 1013 Jones under 1100 nm light illumination at 5 V bias. A fast response of 90 ms/86 ms illustrates the device’s fast speed. An interface study between the PtS2−x and Ga2O3 was conducted using x-ray photoelectron spectroscopy and ultraviolet photoelectron spectroscopy (UPS) which confirmed type-I band alignment. Finally, based on their band alignment study, a carrier transport mechanism was proposed at the interface. This work offers a new opportunity to fabricate large-area high-performance 2D–3D heterostructures based photodetectors for future optoelectronics devices.

Photodetectors Based on ZrS3/MoS2 Heterostructures.

High-performance photodetectors with the detection capability of linearly polarized light have broad applications in both military and civilian fields. Quasi-one-dimensional ZrS3 as an emerging anisotropic two-dimensional material has come under the spotlight owing to its intriguing properties. However, the performance of the ZrS3 photodetector is seriously restricted by its low responsivity. Herein, a novel high-performance photodetector based on the van der Waals ZrS3/MoS2 heterostructure is proposed. Attributed to the charge trapping-assisted photogating effect, interlayer carrier transitions, and fast spatial separation of the photogenerated electron-hole pairs, the device displays superior photoresponse characteristics ranging from the ultraviolet to the visible spectrum in terms of high responsivity up to 212 A/W, an extraordinary external quantum efficiency of 8.5 × 104%, and a prompt rise/decay time of 0.19/0.38 ms. In addition, owing to the profound birefringence and dichroism effects in ZrS3 together with strong light-matter interactions in the heterostructure, profound linear-polarization sensitivity is demonstrated with a dichroic ratio of about 2.8. Overall, this photodetector not only is integrated with the excellent properties of ZrS3 and monolayer MoS2 but also further enhances the advantages through interlayer couplings, which demonstrate the strong potential of the ZrS3-based devices for high-performance, ultrafast, and polarization-sensitive photodetection.

Strong Covalent Coupling in Vertically Layered SnSe2/PTAA Heterojunctions Enabled High Performance Inorganic-Organic Hybrid Photodetectors.

Controllable large-scale integration of two-dimensional (2D) materials with organic semiconductors and the realization of strong coupling between them still remain challenging. Herein, we demonstrate a wafer-scale, vertically layered SnSe2/PTAA heterojunction array with high light-trapping ability via a low-temperature molecular beam epitaxy method and a facile spin-coating process. Conductive probe atomic force microscopy (CP-AFM) measurements reveal strong rectification and photoresponse behavior in the individual SnSe2 nanosheet/PTAA heterojunction. Theoretical analysis demonstrates that vertically layered SnSe2/PTAA heterojunctions exhibit stronger C-Se covalent coupling than that of the conventional tiled type, which could facilitate more efficient charge transfer. Benefiting from these advantages, the SnSe2/PTAA heterojunction photodetectors with an optimized PTAA concentration show high performance, including a responsivity of 41.02 A/W, an external quantum efficiency of 1.31 × 104%, and high uniformity. The proposed approach for constructing large-scale 2D inorganic-organic heterostructures represents an effective route to fabricate high-performance broadband photodetectors for integrated optoelectronic systems.

Recent progress of group III-V materials-based nanostructures for photodetection.

Due to the suitable bandgap structure, efficient conversion rates of photon to electron, adjustable optical bandgap, high electron mobility/aspect ratio, low defects, and outstanding optical and electrical properties for device design, III-V semiconductors have shown excellent properties for optoelectronic applications, including photodiodes, photodetectors, solar cells, photocatalysis, etc. In particular, III-V nanostructures have attracted considerable interest as a promising photodetector platform, where high-performance photodetectors can be achieved based on the geometry-related light absorption and carrier transport properties of III-V materials. However, the detection range from Ultraviolet to Terahertz including broadband photodetectors of III-V semiconductors still have not been more broadly development despite significant efforts to obtain the high performance of III-V semiconductors. Therefore, the recent development of III-V photodetectors in a broad detection range from Ultraviolet to Terahertz, and future requirements are highly desired.
In this review, the recent development of photodetectors based on III-V semiconductor with different detection range is discussed. First, the bandgap of III-V materials and synthesis methods of III-V nanostructures are explored, subsequently, the detection mechanism and key figures-of-merit for the photodetectors are introduced, and then the device performance and emerging applications of photodetectors are provided. Lastly, the challenges and future research directions of III-V materials for photodetectors are presented.&#xD.

High-performance Ga2O3 solar-blind UV photodetectors via film growth regulation and surface state engineering

Gallium oxide (Ga2O3) with a wide bandgap is emerging as one of the most promising candidates for solar-blind photodetectors (SBPDs). However, the practical application of Ga2O3-based SBPDs is impeded by substantial defects-related leakage currents, sluggish response speed, and high-cost, making their practical applications face great challenges. Here, we proposed strategic films growth regulation and surface state engineering to grow high-quality yet economical β-Ga2O3 films, thereby achieving high-performance SBPDs. High-resolution transmission electron microscopy revealed the presence of high-quality films with an extremely regular arrangement of β-Ga2O3 (2‾01) planes. The full width at half maximum and root mean square roughness values are 0.07° and 0.716 nm, respectively. The β-Ga2O3 films demonstrated a significant reduction in VO concentrations after O2/N2 plasma treatment. This process can effectively minimize thermal damage to the sample surface while retaining highly reactive free radicals. The photocurrents of devices can be further enhanced, leading to a larger PDCRs of 8.6 × 107, through N2 plasma treatment. Moreover, the films effectually suppress the persistent photoconductivity effect with τr and τd values of 5.31/0.97 s and 0.49/0.87 s before and after N2 plasma treatment, respectively. We have demonstrated the influence mechanism of O2/N2 plasma treatment on photoelectronic performance. This study provides a practical approach to growing high-quality β-Ga2O3 films and preparing high-performance but low-cost Ga2O3-based SBPDs.

High responsivity VIS-NIR photodetector based on (PEA)2PbI4/P3HT heterojunction

Two-dimensional (2D) Ruddlesden–Popper (RP) perovskite is an ideal platform for building high-performance photodetectors due to its unique structure, excellent stability, and tunable bandgap. However, 2D perovskite heterojunction photodetectors are still less reported. In this work, the photodetector based on (PEA)2PbI4/P3HT heterojunction was prepared by the liquid-phase solution method under air conditions, which showed a responsivity (R) of 8.38 A W−1 and a specific detectivity (D*) of 6.53 × 1011Jones under 808 nm light. In addition, the device has a transient response time of 79.57 μs/484 μs and a high stability performance that maintains more than 95% of the photocurrent under continuous cycling tests and shows good cyclic stability after 30 days without encapsulation. This work provides a promising strategy for extending 2D perovskite photodetectors in the VIS to NIR spectral range.

High-performance solar-blind photodetectors based on Ta-doped ZnSnO3 single crystal thin films

High-quality Ta-doped ZnSnO3 single crystal thin films were grown on LiTaO3 substrates by pulsed laser deposition (PLD) method, and the effects of Ta doping on the lattice structure, surface morphology, electronic structure and photodetector performance of ZnSnO3 thin films are studied in detail. When the Ta doping content is 1 %, the [0001]-oriented ZnSnO3 thin film present the highest quality, which the optical band gap (3.75 eV), the smoothest surface roughness (0.83 nm), and the biggest carrier concentration (4.03 × 1019 cm−3). For the solar-blind photodetectors (PDs), based on these excellent characteristics, the 1 % Ta-doped ZnSnO3 PD exhibits large light-to-dark current ratio (>103), responsivity (21.37 A/W), detectivity ((3.63±0.71) ×1011 Jones) and external quantum efficiency (∼1.04× 104 %) under 254 nm UV light at an applied bias of 5 V. This study suggests that Ta doping can effectively improve the optoelectronic performance of ZnSnO3 PDs, laying the foundation for their application.

High-performance GeSi/Ge multi-quantum well photodetector on a Ge-buffered Si substrate.

This work demonstrates a high-performance photodetector with a 4-cycle Ge0.86Si0.14/Ge multi-quantum well (MQW) structure grown by reduced pressure chemical vapor deposition techniques on a Ge-buffered Si (100) substrate. At -1 V bias, the dark current density of the fabricated PIN mesa devices is as low as 3 mA/cm2, and the optical responsivities are 0.51 and 0.17 A/W at 1310 and 1550 nm, respectively, corresponding to the cutoff wavelength of 1620 nm. At the same time, the device has good high-power performance and continuous repeatable light response. On the other hand, the temperature coefficient of resistance (TCR) of the device is as high as -5.18%/K, surpassing all commercial thermal detectors. These results indicate that the CMOS-compatible and low-cost Ge0.86Si0.14/Ge multilayer structure is promising for short-wave infrared and uncooled infrared imaging.

High-performance and low-power consumption deep UV photodetectors based on MOCVD-grown ZnGa2O4epilayers with high temperature functionality

This work reports on the fabrication of excellent quality deep ultraviolet photodetectors (DUV PDs) based on metalorganic chemical vapor deposition (MOCVD) grown spinel ZnGa2O4 thin films on c-plane sapphire. Herein, The DUV PDs by exhibiting an ultra-low dark current of 6.69 fA and a high photo-to-dark-current ratio (PDCR) of >108 at a low-power operation of 0.2 V. While PDCR reached more than 109 on applied bias of 10 V having extremely low dark current of 37 fA. The detector revealed an ultra-high responsivity of 185 and 3.53 A/W under the exposure of 107 μW/cm2 of 245 nm wavelength at room temperature (RT) and applied bias of 10 and 0.2 V, respectively, and exhibited the record-high detectivity of the order of 1017 Jones. The temperature-dependent operation remained stable across a wide temperature range, from 27 °C to 125 °C, maintaining ultra-low dark current. The nearly constant growth and decay time of DUV PDs throughout the temperature range emphasizes the robustness and reliability of PD. The ideality factor in both DUV and dark conditions nearing unity proves the dominance of the thermionic emission mechanism. Also shows the stable and slight improved performance after a year. Therefore, these findings suggest that ZnGa2O4 is a strong contender for deep UV detection that shows robustness even at high temperatures.

Enhanced photovoltaic response in WSe2 photodetector with asymmetric two-dimensional contacts

Asymmetric contact pairs with different work functions provide an efficient method to extract photogenerated carriers in optoelectrical devices. Specifically, vertical optoelectrical devices based on two-dimensional (2D) materials utilize graphene layers as the bottom and top contacts. Whereas an additional terminal is required for electrostatic doping in either top or bottom graphene to enlarge the built-in electric field. Herein, we present an enhanced photovoltaic response in a vertical WSe2 photodetector utilizing asymmetric 2D contacts. A graphite layer and a degenerate SnSe2 are used as the top and bottom contacts, respectively, with a significant difference in their work functions. By establishing a large built-in electric field across the vertical WSe2 layer, a strong photovoltaic effect is achieved, resulting in an open-circuit voltage of 0.37 V and a short-circuit current of 0.42 μA under 532 nm illumination. The device shows high-performance photodetection characteristics, with a responsivity of 32.04 A W−1, external quantum efficiency of 7475%, and specific detectivity of 3.61 × 1012 Jones. Furthermore, the device can generate a maximum output electrical power of 70.9 nW, enabling a high-power conversion efficiency of 3.5%.

Template-Confined Oriented Perovskite Nanowire Arrays Enable Polarization Detection and Imaging.

Polarized light detection can effectively identify the difference between the polarization information on the target and the background, which is of great significance for detection in complex natural environments and/or extreme weather. Generally, polarized light detection inevitably relies on anisotropic structures of photodetector devices, while organic-inorganic hybrid perovskites are ideal for anisotropic patterning due to their simple and efficient preparation by solution method. Compared to patterned thin films, patterned arrays of aligned one-dimensional (1D) perovskite nanowires (PNWAs) have fewer grain boundaries and lower defect densities, making them well suited for high-performance polarization-sensitive photodetectors. Here, we fabricated PNWAs crystallographically aligned with variable line widths and alignment densities employing CD-ROM and DVD-ROM grating pattern template-confined growth (TCG) methods. The photodetectors constructed from MAPbI3 PNWAs achieved responsivity of 35.01 A/W, detectivity of 6.85 × 1013 Jones, and fast response with a rise time of 172 μs and fall time of 114 μs. They were successfully applied to high-performance polarization detection with a polarization ratio of 1.81, potentially applicable in polarized light detection systems.

Hysteresis, Impedance, and Transients Effects in Halide Perovskite Solar Cells and Memory Devices Analysis by Neuron‐Style Models

AbstractHalide perovskites are at the forefront of active research in many applications, such as high performance solar cells, photodetectors, and synapses and neurons for neuromorphic computation. As a result of ion transport and ionic‐electronic interactions, current and recombination are influenced by delay and memory effects that cause hysteresis of current–voltage curves and long switching times. A methodology to formulate device models is shown, in which the conduction and recombination electronic variables are influenced by internal state variables. The models are inspired in biological frameworks of the Hodgkin–Huxley class of models. Here, the theoretical precedents, the main physical components of the models, and their application to describe dynamical measurements in halide perovskite devices are summarized. The application of several measurement methods is analyzed, as the current–voltage curves at different scan rates, the impedance spectroscopy response, and the time transients. The transition from normal (capacitive) to inverted (inductive) hysteresis, and the convergence of current–voltage curves to a stable value, are described. It is proposed that neuron‐style models capture dynamical complexity with a favorable economy of parameters, toward the identification of the dominant global dynamic processes across a wide voltage span that determines the practical response of different types of devices.

High-performance self-powered UV photodetectors using SnO2 thin film by reactive magnetron sputtering

Self-powered UV photodetector (UVPD) operates without the need for an external energy source and contributes to global energy conservation. With ongoing innovation, self-powered PDs are becoming increasingly appealing for industrial and innovation applications such as advanced environmental monitoring and communication devices. This study investigates the influence of varying working pressures (ranging from 3 to 15 mTorr) during reactive magnetron sputtering on the crystalline structure, surface morphology, and performance of SnO2 thin film photodetectors, aiming to fabricate self-powered UVPDs. The SnO2-based UVPD demonstrates exceptional self-powered UV photodetection capabilities, characterized by a sensitivity of 6.41×105%, responsivity of 0.09 mA/W, and detectivity of 2.99×1010 Jones. In addition, SnO2-based UVPD possesses a switching photo response and recovery time of 0.75 and 0.99 s. Henceforth, it was observed that 8 mTorr SnO2 thin film exhibits exceptional stability, superior photodetector performance, and remarkable repeatability, rendering them highly suitable for UVPD applications. Notably, these films demonstrate sustained functionality for approximately 100 days without necessitating encapsulation. These excellent results confirm that SnO2 thin films are suitable for fabricating future smart optoelectronics devices.

Significantly improved optoelectronic performances of two-dimensional WS2(Er3+)/WSe2(Er3+) van der waals heterojunctions

Two-dimensional heterostructures with excellent properties are potential for high performance optoelectronic applications, since the ultimate thickness limit is possible to be broken with the advent of atomically thin materials. Yet the studies have also been largely constrained by the low physical doping space and absorption rates due to the atomic-thickness layers, and the efforts for high carrier concentrations and gain remain a significant challenge. Herein, high concentration of Er3+ ions are in-situ doped in WS2 and WSe2 atomic layers by chemical vapor deposition (CVD) method. The prepared layers are characterized by atomic force microscopy, transmission electron microscopy, photoluminescence (PL) spectroscopy, and Raman spectroscopy, respectively. 13–14 at% of Er3+ doping concentration in WSe2 and WS2 are examined by energy dispersive spectroscopy (EDS) and X-ray photoelectron spectroscopy (XPS) with high consistency. A microregion fixed-point transfer technique is used to transfer the WS2(Er3+) monolayers onto the WSe2(Er3+) monolayers to form vertical van der Waals heterojunctions. Excellent performances are measured from the WS2(Er3+)/WSe2(Er3+) photodetector with the photoresponsivity of up to 67.4 A/W, external quantum efficiency of 13,202 %, and detectivity of 7.07 × 1011 Jones. Our results prove the effectiveness of Er3+ in-situ doping in WS2(Er3+)/WSe2(Er3+) heterojunctions for high-performance photodetectors.