High Mass Research Articles

Ligand effect of PdRu on Pt-enriched surface for glucose complete electro-oxidation to carbon dioxide and abiotic direct glucose fuel cells.

The development of advanced electrocatalysts for the abiotic direct glucose fuel cells (ADGFCs) is critical in the implantable devices in living organisms. The ligand effect in the Pt shell-alloy core nanocatalysts is known to influence the electrocatalytic reaction in interfacial structure. Herein, we reported the synthesis of ternary Pt@PdRu nanoalloy aerogels with ligand effect of PdRu on Pt-enriched surface through electrochemical cycling. Pt@PdRu aerogels with optimized Pt surface electronic structure exhibited high mass activity and specific activity of Pt@PdRu about 450 mA·mgPt-1 and 1.09 mA·cm-2, which were 1.4 and 1.6 times than that of commercial Pt/C. Meanwhile, Pt@PdRu aerogels have higher electrochemical stability comparable to commercial Pt/C. In-situ FTIR spectra results proved that the glucose oxidation reaction on Pt@PdRu aerogels followed the CO-free direct pathway reaction mechanism and part of the products are CO2 by completed oxidation. Furthermore, the ADGFC with Pt@PdRu ultrathin anode catalyst layer showed a much higher power density of 6.2 mW·cm-2 than commercial Pt/C (3.8 mW·cm-2). To simulate the blood fuel cell, the Pt@PdRu integrated membrane electrode assembly was exposed to glucose solution and a steady-state open circuit of approximately 0.6 V was achieved by optimizing the glucose concentration in cell system.

A hot-Jupiter progenitor on a super-eccentric retrograde orbit.

Giant exoplanets orbiting close to their host stars are unlikely to have formed in their present configurations1. These 'hotJupiter' planets are instead thought to have migrated inward from beyond the ice line and several viable migration channels have been proposed, including eccentricity excitation through angular-momentum exchange with a third body followed by tidally driven orbital circularization2,3. The discovery of the extremely eccentric (e = 0.93) giant exoplanet HD 80606 b (ref. 4) provided observational evidence that hot Jupiters may have formed through this high-eccentricity tidal-migration pathway5. However, no similar hot-Jupiter progenitors have been found and simulations predict that one factor affecting the efficacy of this mechanism is exoplanet mass, as low-mass planets are more likely to be tidally disrupted during periastron passage6-8. Here we present spectroscopic and photometric observations of TIC 241249530 b, a high-mass, transiting warm Jupiter with an extreme orbital eccentricity of e = 0.94. The orbit of TIC 241249530 b is consistent with a history of eccentricity oscillations and a future tidal circularization trajectory. Our analysis of the mass and eccentricity distributions of the transiting-warm-Jupiter population further reveals a correlation between high mass and high eccentricity.

Non-monotonic relations of galaxy star formation, radius, and structure at fixed stellar mass

Abstract We investigate the relation between galaxy structure and star formation rate (SFR) in a sample of ∼2.9 × 104 central galaxies with z < 0.0674 and axial ratios b/a > 0.5. The star-forming main sequence (SFMS) shows a bend around the stellar mass of M* ≤ Mc = 2 × 1010M⊙. At M* ≤ Mc the SFMS follows a power-law $\text{SFR}\propto {}M_\ast ^{0.85}$, while at higher masses it flattens. Mc corresponds to a dark matter halo mass of Mvir ∼ 1011.8M⊙ where virial shocks occurs. Some galaxy structure (e.g., half-light radius, Re) exhibits a non-monotonic dependence across the SFMS at a fixed M*. We find $\text{SFR}\propto {R_e^{-0.28}}$ at fixed M*, consistent with the global Kennicutt-Schmidt (KS) law. This finding suggests that galaxy sizes contribute to the scatter of the SFMS. However, at M* > Mc the relationship between SFR and Re diminishes. Low-mass galaxies above the mean of the SFMS have smaller radii, exhibit compact and centrally concentrated profiles resembling green valley (GV) and quiescent galaxies at the same mass, and have higher $M_{\text{H}_2}/M_\rm{HI}$. Conversely, those below the SFMS exhibit larger radii, lower densities, have no GV or quiescent counterparts at their mass and have lower $M_{\rm{H}_2}/M_\rm{HI}$. The above data suggest two pathways for quenching low-mass galaxies, M* ≤ Mc: a fast one that changes the morphology on the SFMS and a slow one that does not. Above Mc, galaxies below the SFMS resemble GV and quiescent galaxies structurally, implying that they undergo a structural transformation already within the SFMS. For these massive galaxies, CG are strongly bimodal, with SFMS galaxies exhibiting negative color gradients, suggesting most star formation occurs in their outskirts, maintaining them within the SFMS.

Elucidating the antimicrobial and anticarcinogenic potential of methanolic and water extracts of edible Tragopogon coelesyriacus Boiss.

AbstractTragopogon coelesyriacus is a pharmacotherapeutic herbaceous plant belonging to the Asteraceae family and consumed as a vegetable. Here, the methanolic and water extracts of T. coelesyriacus were obtained from its aboveground parts (stem, leaves, and flowers), and the phytochemical potentials were investigated by LC‐HRMS (liquid chromatography–high resolution mass spectrometry) analysis for the first time. The antibacterial, antifungal, and anticarcinogenic activities of T. coelesyriacus extracts were investigated using experimental and in silico methods. T. coelesyriacus methanol extract revealed remarkable inhibitory activity against Staphylococcus aureus, Pseudomonas aeruginosa, and Klebsiella pneumonia (MICs = 0.83, 1.67, and 1.67 mg/mL, respectively) compared to Escherichia coli and Enterobacter aerogenes (MIC = 53.3 mg/mL). Inhibitory effects of T. coelesyriacus methanolic extracts were also observed in all Candida species tested, with the highest inhibition on Candida krusei (MIC = 0.83 mg/mL), whereas no inhibitory effect was identified from the water extract. Additionally, both T. coelesyriacus methanolic (IC50 = 86 μg/mL) and water (IC50 = 92 μg/mL) extracts revealed significant selective anticarcinogenic effects on AR42J pancreatic cancer cells. HeLa and MDA‐MB‐231 cells were, however, more resilient to methanol and water extract, respectively. In silico analyses further elucidated the noteworthy antibacterial potential of keracyanin chloride on S. aureus MurB enzyme and the remarkable inhibitory potential of naringin on FYN kinase specific for pancreatic cancer (AR42J) development. In conclusion, T. coelesyriacus phytochemicals with antibacterial, antifungal, and anticancer properties were revealed for the first time, and molecular docking studies on potential targets confirmed good agreement with experimental findings. Therefore, the current studies on T. coelesyriacus provide the basis for investigating new pharmaceutical potentials of other Tragopogon members.

The spatial distribution of components in Moringa oleifera (Lam) seed by matrix-assisted laser desorption/ionization mass spectrometry imaging (MALDI-MSI)

In this paper, 70 % methanol was used as solvent to extract the principal components from Moringa oleifera (Lam) seed with the ratio (w/v, 1:10) by ultrasonic-assisted extraction. The extract in Lam seed was detected by high resolution mass spectrometry and MS/MS spectra. The result suggests that there are three principal components including malic acid, d-trehalose and 4-(α-L-rhamnopyranosyloxy) benzyl glucosinolate in this extract. Based on this result, the spatial distribution of these components in Lam seed was visually obtained by matrix-assisted laser desorption/ionization mass spectrometry imaging (MALDI-MSI). There is much malic acid in the center of endosperm in Lam kernel and little in the shell of Lam seed. d-trehalose is mainly distributed in the seed coat of Lam seed, and almost no d-trehalose is distributed in the kernel of Lam seed. 4-(α-L-rhamnopyranosyloxy) benzyl glucosinolate is distributed in the seed coat and endosperm of Lam seed. The relative content of this compound in the seed coat of Lam seed is much higher than that in the endosperm. The result further suggests that the different component in Lam seed is distributed in different part. This study can provide some valuable reference for efficient extracting active components from Lam.

Investigation of social isolation and depression in female employees with urinary incontinence during the COVID-19 pandemic period.

Urinary incontinence (UI) affects almost one-third of adult women. This is often taken as a section of the aging process and incurable In general, women perceive UI as more of a social issue and a taboo rather than a medical problem; they are reluctant to discuss the matter or seek assistance. This research was conducted to investigate the level of social isolation and depression in female employees with UI during the COVID-19 pandemic period. The study was done with 533 paticipant. The study data were done using the Nottingham Health Profile Social Isolation Scale (NHPSIS), and Beck Depression Inventory (BDI). The total scores of the NHPSIS and BDI were found to be 18.55±3.3 (minimum = 5, maximum = 25) and 49.22±11.4 (minimum = 12, maximum = 60), respectively. In the Pearson correlation analysis, a strong, statistically significant, and positive correlation was discovered between NHPSIS and the average BDI total scores among women. The level of depression and social isolation were obtained to be high among UI women who had a mix UI, high frequencies of UI, belong to higher age groups, singles, and high body mass index. It was showed that the levels of depression and social isolation scores were showed to be high in women had UI.

Comparative assessment of thermal oils and water as working fluids in parabolic trough collectors for enhanced solar power generation

Examining the thermal behavior of specific working fluids, namely Syltherm800 and TherminolVP-1, in parabolic trough collectors (PTCs) is imperative for enhancing power generation. This study addresses a crucial gap by conducting computational fluid dynamics simulations through COMSOL Multiphysics software and experimental tests to explore the advantages of utilizing thermal oils over water as a working fluid in PTCs. Experimental tests were performed on a water-based PTC in Iraq to validate the numerical model, considering various operating conditions such as input temperature (323.15–423.15 K) and mass flow rates (0.00926–0.0556 kg/s). Key parameters including output temperature, thermal efficiency, useful heat, and total heat losses were evaluated. The numerical model was validated against experimental data, showing good agreement with an overall discrepancy of 1.7% for the current experiments and 3.18% for literature results. The results indicated that Syltherm800, particularly with a high mass flow rate, outperformed TherminolVP-1 and water in terms of overall thermal performance. The optimal PTC thermal efficiency was achieved in July with a mass flow rate of 0.0556 kg/s and an input temperature of 348.15 K. The optimal range for PTC thermal efficiency over four months was between 50% and 70%. The endorsement of thermal oils in PTCs is supported by their low vapor pressure, superior thermal stability, and extended lifespan.

Discovery of Novel Antioomycete Metabolites from the Marine-Derived Fungus Paraconiothyrium sporulosum.

In our screening program for natural products that are effective in controlling plant diseases, we found that the culture filtrate of Paraconiothyrium sporulosum SFC20160907-M11 effectively suppressed the development of tomato late blight disease caused by Phytophthora infestans. Using a bioassay-guided fractionation of antioomycete activity, 12 active compounds (1-12) were obtained from an ethyl acetate extract of the culture filtrate. Chemical structures of five new compounds 1-5 were determined by the extensive analyses of nuclear magnetic resonance (NMR), high resolution mass spectrometry (HRMS), and circular dichroism (CD) data. Interestingly, mycosporulonol (1) and botrallin (8) completely inhibited the growth of P. infestans at concentrations of 8 and 16 μg/mL, respectively. Furthermore, the spray treatment of 1 and 8 (500 μg/mL) successfully protected tomato seedlings against P. infestans with disease control values of 92%. Taken together, these results suggest that the culture filtrates of P. sporulosum SFC20160907-M11 and their bioactive metabolites can be used as new antioomycete agents for Phytophthora late blight control.

Effects of retained node numbers on berry maturity and yield components of cane-pruned Sauvignon blanc

Cane pruning is used in most New Zealand Sauvignon blanc vineyards to manage yield, vine balance (relationship between vegetative growth and fruit growth) and fruit primary and secondary metabolites. The source–sink ratio (TLA/FM—total leaf area to fruit mass or ELA/FM—exposed leaf area to fruit mass), the fruit mass to pruning mass (FM/PM), the fruit mass to cane mass (FM/CM) and fruit composition provide an assessment of the vine performance and balance. The interpretation of these metrics (i.e., TLA/FM, ELA/FM, FM/PM, FM/CM) requires their comparison with known optimal ranges specific to cultivars, locations and growing conditions. More often, such context- and cultivar-specific optimal ranges do not exist, thus warranting research to investigate them. To understand the influence of retained node numbers on the vegetative and fruit development of Sauvignon blanc, grapevines were pruned across three vineyard sites (two in Marlborough—Site 1 and 2, and one in Waipara—Site 3) over two growing seasons, retaining 10, 20, 30, 40 and 50 nodes on one to four canes (each cane carrying ten nodes, with 50-node vines carrying on average 12.5 nodes on each of the four canes). The accumulation of soluble solids (TSS) generally increased at lower node numbers and vine yields, reflecting an increase in ELA/FM, with 50-node vines having the least TSS concentration at harvest. The average berry mass, titrable acidity (TA) and pH were unaffected by node numbers over the two seasons. A low source–sink ratio induced by high node numbers not only reduced the vine capacity to ripen the current crop but also reduced the following season’s bunch number per shoot (from 1.8 to 1.6 bunches per shoot; p < 0.05), average bunch mass (from 82.0 ± 6 g to 67.7 ± 3 g; p < 0.01) and bunch mass per shoot (from 153.5 ± 15 g to 106.7 ± 9 g; p < 0.05). When compared to 50-node vines, 10-node vines had a two-fold increase in the average cane mass (from 30.1 ± 3.9 g to 69.2 ± 8.7 g; p < 0.001) and average old cane mass (from 82.4 ± 6.9 g to 163.8 ± 21 g; p < 0.001). The ELA/FM and TLA/FM required for optimal TSS accumulation were 0.75 m2 kg-1 and 2.0 m2 kg-1, respectively, across all sites. A source–sink ratio above these values resulted in high average cane mass and average old cane mass (an indication of excess vigour), while lower values indicated reduced vigour and slowed TSS accumulation. This research provides useful optimal ranges to compare and interpret vine balance metrics measured at those sites.

QC-GN2oMS2: a Graph Neural Net for High Resolution Mass Spectra Prediction.

Predicting the mass spectrum of a molecular ion is often accomplished via three generalized approaches: rules-based methods for bond breaking, deep learning, or quantum chemical (QC) modeling. Rules-based approaches are often limited by the conditions for different chemical subspaces and perform poorly under chemical regimes with few defined rules. QC modeling is theoretically robust but requires significant amounts of computational time to produce a spectrum for a given target. Among deep learning techniques, graph neural networks (GNNs) have performed better than previous work with fingerprint-based neural networks in mass spectra prediction. To explore this technique further, we investigate the effects of including quantum chemically derived information as edge features in the GNN to increase predictive accuracy. The models we investigated include categorical bond order, bond force constants derived from extended tight-binding (xTB) quantum chemistry, and acyclic bond dissociation energies. We evaluated these models against a control GNN with no edge features in the input graphs. Bond dissociation enthalpies yielded the best improvement with a cosine similarity score of 0.462 relative to the baseline model (0.437). In this work we also apply dynamic graph attention which improves performance on benchmark problems and supports the inclusion of edge features. Between implementations, we investigate the nature of the molecular embedding for spectra prediction and discuss the recognition of fragment topographies in distinct chemistries for further development in tandem mass spectrometry prediction.

Immunoaffinity Intact-Mass Spectrometry for the Detection of Endogenous Concentrations of the Acetylated Protein Tumor Biomarker Neuron Specific Enolase.

Intact-mass spectrometry has huge potential for clinical application, as it enables both quantitative and qualitative analysis of intact proteins and possibly unlocks additional pathophysiological information via, e.g., detection of specific post-translational modifications (PTMs). Such valuable and clinically useful selectivity is typically lost during conventional bottom-up mass spectrometry. We demonstrate an innovative immunoprecipitation protein enrichment assay coupled to ultrahigh performance liquid chromatography quadrupole time-of-flight high resolution mass spectrometry (UPLC-QToF-HRMS) for the fast and simple identification of the protein tumor marker Neuron Specific Enolase Gamma (NSEγ) at low endogenous concentrations in human serum. Additionally, using the combination of immunoaffinity purification with intact mass spectrometry, the presence of NSEγ in an acetylated form in human serum was detected. This highlights the unique potential of immunoaffinity intact mass spectrometry in clinical diagnostics.

Square Parametric Excitation: A Digital Resonant Method for the Quadrupole Ion Trap.

Digital ion trap technology is an alternate method for driving quadrupole ion traps and mass filters using variable frequency, fixed amplitude RF square waves in place of variable amplitude, fixed frequency RF sine waves. This technique offers some advantages such as an increase in the high mass analysis range by varying frequency and lower overall voltage requirements. Here, we present a complex square waveform developed for resonant parametric excitation in a quadrupole linear ion trap. Unlike traditional resonance methods, the driving RF square wave and auxiliary square wave are coupled using the same digital circuitry without the need for transformer coupling. In this work, we use this complex waveform to selectively excite the first order parametric resonances of ion motion. The square parametric excitation method presented here employs a simple and repetitive circuit design consisting of a low-voltage waveform generator followed by a series of high-voltage MOSFET switches. This design allows for resonance methods to be easily implemented in the all-digital quadrupole. The complex square waveform can perform the same useful functions as sine wave auxiliary signals, such as selective mass elimination and mass isolation. We also demonstrate that the mass resolution performance and S/N of our digital mass spectrometer is improved by applying the complex square waveform during ion ejection.

Entropy-Assisted Anion-Reinforced Solvation Structure for Fast-Charging Sodium-Ion Full Batteries.

Anion-reinforced solvation structure favors the formation of inorganic-rich robust electrode-electrolyte interface, which endows fast ion transport and high strength modulus to enable improved electrochemical performance. However, such a unique solvation structure inevitably injures the ionic conductivity of electrolytes and limits the fast-charging performance. Herein, a trade-off in tuning anion-reinforced solvation structure and high ionic conductivity is realized by the entropy-assisted hybrid ester-ether electrolyte. Anion-reinforced solvation sheath with more anions occupying the inner Na+ shell is constructed by introducing the weakly coordinated ether tetrahydrofuran into the commonly used ester-based electrolyte, which merits the accelerated desolvation energy and gradient inorganic-rich electrode-electrolyte interface. The improved ionic conductivity is attributed to the weakly diverse solvation structures induced by entropy effect. These enable the enhanced rate performance and cycling stability of Prussian blue||hard carbon full cells with high electrode mass loading. More importantly, the practical application of the designed electrolyte was further demonstrated by industry-level 18650 cylindrical cells.

Entropy‐Assisted Anion‐Reinforced Solvation Structure for Fast‐Charging Sodium‐Ion Full Batteries

Anion‐reinforced solvation structure favors the formation of inorganic‐rich robust electrode‐electrolyte interface, which endows fast ion transport and high strength modulus to enable improved electrochemical performance. However, such a unique solvation structure inevitably injures the ionic conductivity of electrolytes and limits the fast‐charging performance. Herein, a trade‐off in tuning anion‐reinforced solvation structure and high ionic conductivity is realized by the entropy‐assisted hybrid ester‐ether electrolyte. Anion‐reinforced solvation sheath with more anions occupying the inner Na+ shell is constructed by introducing the weakly coordinated ether tetrahydrofuran into the commonly used ester‐based electrolyte, which merits the accelerated desolvation energy and gradient inorganic‐rich electrode‐electrolyte interface. The improved ionic conductivity is attributed to the weakly diverse solvation structures induced by entropy effect. These enable the enhanced rate performance and cycling stability of Prussian blue||hard carbon full cells with high electrode mass loading. More importantly, the practical application of the designed electrolyte was further demonstrated by industry‐level 18650 cylindrical cells.

Application of Cyrene solvent for the fabrication of polymethyl methacrylate, polyethyl methacrylate and composite films containing hydroxyapatite and diamonds

AbstractCyrene is a new biodegradable solvent, which represents a green alternative to many traditional toxic solvents for advanced polymers. Therefore, this investigation is motivated by interest in applications of Cyrene for polymer processing. The feasibility of solubilization of polymethyl methacrylate (PMMA) and polyethyl methacrylate (PEMA) in Cyrene is demonstrated. The ability to form relatively concentrated solutions of the high molecular mass polymers is an important factor for the formation of PMMA and PEMA films by a dip coating method. It was found that the polymer coatings provide corrosion protection of stainless steel in 30 g L−1 NaCl solutions. Another important finding is that the use of Cyrene facilitates the fabrication of stable suspensions of hydroxyapatite (HAp), microdiamond, and nanodiamond particles. Therefore, the problems of the dispersant selection for dispersion of chemically inert diamond and development of biocompatible dispersants are avoided using Cyrene. For the fabrication of composite films, HAp nanorods with reduced particle size are obtained using rutin as a chelating capping agent. Composite films containing HAp, microdiamond and nanodiamond in the PMMA or PEMA matrix are obtained. The composite films are promising for biomedical applications. It was found that the film morphology, composition and microstructure are influenced by the solvent–particle–polymer interactions and processing conditions.

Improved rate capability and energy density of high-mass hybrid supercapacitor realized through long-term cycling stability testing and selective electrode design

To render supercapacitors (SCs) more practical, they must exhibit high cycling stability of at least ten thousand cycles with commercial-level mass loadings, which differentiates them from batteries. Metal-organic framework (MOF)-based electrode materials are promising for use in energy storage systems owing to their excellent electrochemical performance. In this study, we report the electroactivities of bimetallic MOFs (Co, Ni, and Co–Ni) using a single-step, facile, and cost-effective hydro/solvothermal method. To optimize their performances, we develop a general strategy for analyzing various binder-free MOFs. Additionally, the effects of the reaction time, reaction temperature, solvents, and elements (Ni, Co, and H2BDC) on the surface morphology and electrochemical performance are investigated. Based on an analysis of the electrochemical properties of all the synthesized electrode materials, the optimal electrode delivers an ultrahigh areal capacity of 2621 µAh cm−2 (297.1 mAh g−1) at 7 mA cm−2, with a high-rate capability of 82.5 % even at 40 mA cm−2. The optimized Co–Ni MOF electrode is employed as a positive electrode to fabricate an aqueous hybrid SC (HSC) with an activated carbon-coated nickel foam electrode as a negative electrode. The as-fabricated HSC exhibits excellent electrochemical properties with exceptional cycling stability (120k cycles) and improved rate capability (60 %). Additionally, we identify factors that contribute to improved redox reactions in the Co–Ni MOF-based HSC, such as the role of Co–Ni MOFs in the redox reaction and the influences of other structural parameters on charge storage and transfer processes. Our aim is to further understand the underlying mechanisms of the improved redox reactions and thus obtain new insights into the design and optimization of Co–Ni MOF-based HSCs. Finally, the energy storage properties of the HSC are validated by using it to power different electronic devices. The promising outcomes obtained in this work can serve as a basis for the future practical implementation of high-energy-density HSCs with high mass loadings and charging rates. SynopsisTo render the practicability of hybrid supercapacitor (HSC) with enhanced energy storage properties, we investigate the electroactivities of bimetallic metal-organic frameworks (MOFs) (Co, Ni, and Co–Ni) using a single-step, facile, and cost-effective hydro/solvothermal method. To optimize their performances, a general strategy is developed for analyzing various binder-free MOFs. Additionally, the effects of the reaction time, reaction temperature, solvents, and elements (Ni, Co, and H2BDC) on the surface morphology and electrochemical performance are studied. In addition, we validate the energy storage properties of the HSC by using it to power different electronic devices. The promising outcomes obtained in this study can serve as a basis for the future practical implementation of high-energy-density HSCs with high mass loadings and charging rates.

Electrochemical investigation, DNA binding, DFT, and molecular docking analysis of phenolic acids isolated from Macrotyloma uniflorum

Macrotyloma uniflorum [M. uniflorum], is the members of the family Fabaceae. It has been demonstrated to have numerous health advantages and is high in nutritional value. The two isolated phenolic acids that are the subject of this study are ferulic acid and cinnamic acid, which are extracted from Macrotyloma uniflorum. NMR spectroscopy, high resolution mass spectrometry (HR-ESI-MS), UV–visible spectroscopy, and infrared (IR) spectroscopy were used to characterize the structures of the isolated compounds. When the separated phenolic acids interacted with CT-DNA, a hypochromic shift was observed. The MTT test on the separated chemicals in Hela cells revealed a higher level of cellular inhibition. The findings confirm the positive biological activities of the extracted phenolic compounds from horse gram seed, which are corroborated by docking experiments.

Simulations on hybrid thermal management of mini-channel cold plate and PCM for lithium-ion batteries under discharging and thermal runaway conditions

In this study, we compared the performance of different structures of mini-channel cold plate (MCP) - phase change material (PCM) hybrid thermal management on discharge and thermal runaway. The heat transfer structures for them can be categorized into three types: (a) uncoupled, (b) semi-coupled, and (c) fully coupled. Among these, the semi-coupled design B exhibits the best performance. Specifically, in the high rate discharge condition, the structure can control the battery temperature at 44.37 °C at low coolant mass flow rate, and the temperature at 36.47 °C at high mass flow rate, while the temperature difference (TD) of a single cell does not exceed 2.01 °C. In a low-multiplier discharge zero-energy system, the pack temperature rise can be limited to no more than 10 °C in 35 °C environment. Under external short-circuit conditions, a lower coolant mass flow rate is sufficient to keep the pack temperature at 43.22 °C. Under internal short-circuit thermal runaway (TR), lower coolant mass flow rate can prolong the TR of the adjacent cell up to 521 s, and higher mass flow rate can completely inhibit the occurrence of TR. The objective of this study is to offer valuable references for the design and implementation of hybrid MCP-PCM cooling systems.

Combination and reinterpretation of LHC SUSY searches

To maximise the information obtained from various independent new physics searches conducted at the LHC, it is imperative to consider the combination of multiple analyses. To showcase the exclusion power gained by combining signal regions from different searches, we consider a simplified scenario inspired by supersymmetry, with all particles but one squark flavour and a bino-like neutralino decoupled. The corresponding signal therefore comprises strong squark pair production, associated squark-neutralino production, as well as weak neutralino pair production. We find that considering the associated and strong production mechanisms together significantly impacts mass limits, while contributions from the weak production are insignificant in the context of current exclusion limits. In addition, we demonstrate that the combination of uncorrelated signal regions as assessed from the recent TACO approach substantially pushes exclusion limits towards higher masses, relative to the bounds derived from the most sensitive individual analyses.

Organo-Mediated Ring-Opening Polymerization of Ethylene Brassylate from Cellulose Nanofibrils in Reactive Extrusion.

Ethylene brassylate is a renewable macrolactone from castor oil that can be polymerized via ring-opening polymerization (ROP) to obtain a fully biosourced biodegradable polyester. ROP mediated by organometallic catalysts leads to high molar mass poly(ethylene brassylate) (PEB). However, the use of metal-free organocatalysis has several advantages, such as the reduction of toxic and expensive metals. In this work, a novel cellulose nanofibril (CNF)/PEB nanocomposite fabrication process by organocatalysis and reactive extrusion (REx) is disclosed. Here, ROP was carried out via solvent-free REx in the presence of CNFs using organic 1,5,7-triazabicyclo[4.4.0]dec-5-ene as a catalyst. Neat or lactate-esterified CNFs (LACNF) were used as initiators to investigate the effect of surface topochemistry on the in situ polymerization and the properties of the nanocomposites. A molar mass of 9 kDa was achieved in the presence of both unmodified and LACNFs with high monomer conversion (>98%) after 30 min reaction in a microcompounder at 130 °C. Tensile analysis showed that both nanofibril types reinforce the matrix and increase its elasticity due to the efficient dispersion obtained through the grafting from polymerization achieved during the REx. Mechanical recycling of the neat polymer and the nanocomposites was proven as a circular solution for the materials' end-of-life and showed that lactate moieties induced some degradation.