High Loop Research Articles

Spatially resolved plasma composition evolution in a solar flare – The effect of reconnection outflow

Context. Solar flares exhibit complex variations in elemental abundances compared to photospheric values. These abundance variations, characterized by the first ionization potential (FIP) bias, remain challenging to interpret. Aims. We aim to (1) examine the spatial and temporal evolution of coronal abundances in the X8.2 flare on 2017 September 10, and (2) provide a new scenario to interpret the often observed high FIP bias loop top, and provide further insight into differences between spatially resolved and Sun-as-a-star flare composition measurements. Methods. We analyzed 12 Hinode/Extreme-ultraviolet Imaging Spectrometer (EIS) raster scans spanning 3.5 hours, employing both Ca XIV 193.87 Å/Ar XIV 194.40 Å and Fe XVI 262.98 Å/S XIII 256.69 Å composition diagnostics to derive FIP bias values. We used the Markov Chain Monte Carlo (MCMC) differential emission measure (DEM) method to obtain the distribution of plasma temperatures, which forms the basis for the FIP bias calculations. Results. Both the Ca/Ar and Fe/S composition diagnostics consistently show that flare loop tops maintain high FIP bias values of > 2–6, with peak phase values exceeding 4, over the extended duration, while footpoints exhibit photospheric FIP bias of ∼1. The consistency between these two diagnostics forms the basis for our interpretation of the abundance variations. Conclusions. We propose that this variation arises from a combination of two distinct processes: high FIP bias plasma downflows from the plasma sheet confined to loop tops, and chromospheric evaporation filling the loop footpoints with low FIP bias plasma. Mixing between these two sources produces the observed gradient. Our observations show that the localized high FIP bias signature at loop tops is likely diluted by the bright footpoint emission in spatially averaged measurements. The spatially resolved spectroscopic observations enabled by EIS prove critical for revealing this complex abundance variation in loops. Furthermore, our observations show clear evidence that the origin of hot flare plasma in flaring loops consists of a combination of both directly heated plasma in the corona and from ablated chromospheric material; and our results provide valuable insights into the formation and composition of loop top brightenings, also known as EUV knots, which are a common feature at the tops of flare loops.

A wideband high-PSR OCL LDO using a gain-relaxed OTA featuring dynamic complex zeros frequency compensation

This article proposes an Output-Capacitor-Less (OCL) Low-Dropout (LDO) regulator with an assisted positive feedback loop technique, which mimics a negative resistance, along with a single common-gate stage. Conventional techniques utilize multistage high-gain OTA to achieve a high DC loop gain. However, such an OTA suffers from high power consumption and sophisticated frequency compensation mechanisms. Instead, the use of a single-stage relatively low-gain OTA helps to extend the bandwidth. Then, the overall DC loop gain is maximized by the proposal of a novel negative resistance circuit. To further improve the PSR, a bulk-driven ripple canceling path that is insensitive to process corners is proposed making the LDO suitable for high-PSR applications. Stability is another challenge in the design of OCL LDOs due to its associated complex poles. We propose a new frequency compensation technique by introducing two complex zeros to eliminate these complex poles. Hence, the overall stability is improved. Since these complex poles location vary from light to heavy loads, the proposed zeros dynamically change accordingly. Besides, this suggested mechanism has been analyzed using the generalized time-and-transfer constants (TTCs) circuit analysis technique. Under heavy load conditions, the suggested LDO has attained phase and gain margins of 62.8° and 29 dB, respectively. Moreover, Monte Carlo simulations along with process and temperature variations have been investigated to prove the reliability of such a frequency compensation technique. The proposed LDO has been implemented in 65 nm CMOS technology node with a short pass transistor length of 100nm. The simulation results reveals that the LDO draws 299.4μA of quiescent current under light load conditions and 296.8μA under heavy load conditions (including the bandgap voltage reference). The suggested LDO functions at 1.2V supply voltage, delivers 0.93V output voltage and can handle a load current up to 10mA with load regulation of 17μV/mA, line regulation of 2.22mV/V, and PSR of −48.7dB at low frequencies. The PSR at 1MHz is at least −32.5dB which is superior to the reported recent LDOs.

Mosaic HIV-1 vaccine and SHIV challenge strain V2 loop sequence identity and protection in primates

The failure of human vaccine efficacy trials assessing a mosaic HIV-1 vaccine calls into question the translatability of preclinical SHIV challenge studies that demonstrated high efficacy of this vaccine in primates. Here we present a post hoc immune correlates analysis of HIV-1 Env peptide-binding antibody responses from the NHP13-19 study identifying the V2 loop as the principal correlate of protection in primates. Moreover, we found high V2 loop sequence identity between the Mos1 vaccine component and the SHIV challenge strain, while the vaccine showed considerably lower V2 identity to globally circulating HIV-1 sequences. Thus, the induction of immune responses against the V2 epitope, which had exceptional identity between the vaccine and challenge Env strains, may have contributed to the high protection in primates.

Morphological Prediction of CPAP Associated Acute Respiratory Instability.

Multiple mechanisms are involved in the pathogenesis of obstructive sleep apnea (OSA). Elevated loop gain is a key target for precision OSA care and may be associated with treatment intolerance when the upper airway is the sole therapeutic target. Morphological or computational estimation of LG is not yet widely available or fully validated - there is a need for improved phenotyping/endotyping of apnea to advance its therapy and prognosis. This study proposes a new algorithm to assess self-similarity as a signature of elevated loop gain using respiratory effort signals and presents its use to predict the probability of acute failure (high residual event counts) of continuous positive airway pressure (CPAP) therapy. Effort signals from 2145 split-night polysomnography studies from the Massachusetts General Hospital were analyzed for SS and used to predict acute CPAP therapy effectiveness. Logistic regression models were trained and evaluated using 5-fold cross-validation. Receiver operating characteristic (ROC) and precision-recall (PR) curves with AUC values of 0.82 and 0.84, respectively, were obtained. Self-similarity combined with the central apnea index (CAI) and hypoxic burden outperformed CAI alone. Even in those with a low CAI by conventional scoring criteria or only mild desaturation, SS was related to poor therapy outcomes. The proposed algorithm for assessing SS as a measure of expressed high loop gain is accurate, non-invasive, and has the potential to improve phenotyping/endotyping of apnea, leading to more precise sleep apnea treatment strategies.

Experimental investigation on the thermal performance of high temperature two-phase loop thermosyphon

High-temperature two-phase loop thermosyphons (TPLTs) have the potential to be applied in high-temperature thermochemical conversions, concentrated solar energy, and nuclear energy. However, there has been limited investigation on the thermal performance of TPLTs so far. This work experimentally examines the thermal performance of TPLTs using alkali metals (NaK alloy and pure Na) as working fluids, aiming for internal energy recovery of a double-riser reactor. The effects of filling ratios (FRs), heating temperature, and altitude difference between the evaporator and condenser are investigated regarding start-up characteristics and steady-state performance. The experimental results show that the TPLT with NaK as the working fluid can successfully complete the start-up when the heating temperature is set to above 650 °C under the test conditions. However, the TPLT using pure Na as the working fluid can't successfully complete the start-up from a frozen state without a preheating operation. According to the variations in thermal resistance, an FR of 38% in the TPLT allows for the best heat-transfer performance under steady state when compared to the conditions that FRs are equal to 25% and 50%. Additionally, placing the condenser slightly higher than the evaporator is beneficial for improving the steady-state performance. However, if the condenser is lower than the evaporator, its steady-state performance is remarkably degraded.

Sex differences in sleep and sleep-disordered breathing.

There is increasing evidence for relevant sex differences in pathophysiology, symptom presentation and outcomes in obstructive sleep apnoea (OSA). However, research on sex differences and sex-specific phenotypes in sleep-disordered breathing (SDB) is still in its infancy and data on sex differences in other SDB is still very scarce. While OSA is more common in men than in premenopausal women, the prevalence of OSA doubles postmenopausally and becomes comparable to that of men. Women have a lower collapsibility of the upper airway and a lower arousal threshold. In addition, the rapid eye movement (REM)-apnoea-hypopnoea index (AHI) is typically higher in women than in men, but the non-REM-AHI and thus the total AHI is often lower. Women are often symptomatic at lower AHI and present more frequently with symptoms of sleep fragmentation and poor sleep quality. Both certain forms of OSA (e.g. REM-OSA) and certain phenotypes (e.g. COMISA) are more common in women. Men have a higher risk of high loop gain central sleep apnoea. For a better understanding of sex-typical phenotypes with the aim of a more targeted treatment approach of SDB, adequately powered studies on sex differences in SDB should be conducted.

Experimental investigation on the performance of a high capacity dual compensation chamber loop heat pipe under the effect of acceleration

As an efficient two-phase heat transfer technology, the application of loop heat pipe (LHP) technology in the aerospace industry has received more attention in recent years. This paper presents a performance study of a high capacity dual compensation chamber loop heat pipe (DCCLHP) under acceleration environment. The experimental study investigated accelerations up to 8 g in five directions, while the DCCLHP operated close to the heat transfer limit in the corresponding directions. The experimental results indicated that the effect of acceleration on the performance of the DCCLHP could be either favorable or unfavorable, depending on the direction of acceleration. The operating temperature of the DCCLHP varied between −6 °C and +14 °C under different acceleration conditions. The thermal resistance changes of the DCCLHP ranged from −25 % to 116 %. For the high capacity DCCLHP, the effect of acceleration on its performance was mainly realized by affecting the thickness of the condensate film inside the condenser, which in turn affected the condenser performance. The research findings presented in this paper might aid in the advancement of DCCLHP technology for aircraft applications.

Coupling of potential habitat models with particle tracking experiments to examine larval fish dispersal and connectivity in deep water regions.

Computing Lagrangian trajectories with ocean circulation models is a powerful way to infer larval dispersal pathways and connectivity. Defining release areas and timing of particles to represent larval habitat realistically is critical to obtaining representative dispersal pathways. However, it is challenging due to spatial and temporal variability in larval density. Forward-tracking particle experiments were conducted to study larval connectivity of four species (neritic or mesopelagic) in the Gulf of Mexico's (GoM) deep-water region. A seasonal climatology coupled with predicted potential larval habitat models based on generalized additive models was used to delimit the particle dispersal origin. Two contrasting mesoscale circulation patterns were examined: (1) high Loop Current (LC) intrusion, absence of recently detached LC anticyclonic eddies (LC-ACE), and no interaction between LC-ACEs and the semi-permanent cyclonic eddy (CE) in the Bay of Campeche (BoC), and (2) limited LC intrusion, a recently detached LC-ACE, and interaction between LC-ACEs and the BoC's CE. To simulate larval transport, virtual larvae were randomly released in the potential habitats and advected for 30 days with the velocity fields of the HYbrid Coordinate Ocean Model with hourly-resolution assimilation. Potential habitat location and size played a major role in dispersal and connectivity. A greater percentage of particles were retained in potential habitats restricted to the southern BoC, suggesting lower connectivity with other GoM regions than those encompassing most of the BoC or the central Gulf. Mesoscale feature interactions in the western GoM and BoC led to greater dispersion along the western basin. By contrast, the absence of ACE-CE interaction in the BoC led to greater retention and less connectivity between the southern and northern GoM. Under high LC intrusion, particles seeded north of the Yucatan Shelf were advected through the Florida Straits and dispersed within the GoM. Coupling potential habitat models with particle experiments can help characterize the dispersal and connectivity of fish larvae in oceanic systems.

Ultra-low-power super class-AB adaptive biasing operational transconductance amplifier with enhanced gain for biomedical applications

The operational transconductance amplifier (OTA) proposed in this article is a bulk-driven (BD), single-stage, super-class-AB, adaptive biasing, functioning in the subthreshold region (ST) with an enormously low power supply of ± 0.25 V, providing high-gain. The input core of the OTA circuit is composed of adaptively biased BD differential input pairs based on flipped voltage follower (FVF), which drive in class-AB mode with a partial positive feedback (PPF) approach. The circuit additionally employs FVF and self-cascode (SC)-based low-power current mirror loads at its output to obtain significantly high gain and unity gain frequency. In addition, using adaptive loads based on source-degenerated metal oxide semiconductor (MOS) resistors raises dynamic current more efficiently, consequently improving the slew rate and unity gain frequency (UGF) without drawing additional power. Employing the cadence spectre tool and the UMC 0.18 μm complementary metal oxide semiconductor (CMOS) process technology, the designed OTA has been simulated. The simulation outcomes substantiate that the amplifier provides high open loop DC gain of 75 dB, 18.75 kHz UGF with a phase margin of 63.93º, and input-referred noise (IRN) of 0.734 µV/Hz0.5 at 1 kHz frequency. The proposed OTA consumes just 60.15 nW of power. The performance results confirmed that the proposed OTA circuit is appropriate in biomedical applications.

A new transient phenomenon caused by active current dynamics of grid-following converters during severe grid faults

Existing transient stability analysis of grid-following (GFL) converters mainly focuses on the dynamics of the phase-locked loop (PLL), while current loop dynamics are usually neglected due to their faster response than PLL. However, this article reveals that active current may not be able to track its reference quickly during severe grid faults even with high current loop bandwidth, which leads to a non-negligible impact on the transient stability of GFL converters. Furthermore, this article discusses the intrinsic mechanism of why active current cannot track its reference quickly during severe grid faults and establishes a refined third-order transient synchronization model that offers a more accurate assessment of transient stability during severe grid faults than the conventional second-order model.

Discovery of dissipative microwave photonic soliton molecules in dual-bandpass optoelectronic oscillator

Optoelectronic oscillators (OEOs), which have attracted extensive studies in the past decades, are high quality-factor optoelectronic feedback loops for generating various ultra-pure microwave signals. In essence, OEOs are also dissipative nonlinear systems with multiple timescale characteristics and abundant nonlinearities, which open the possibilities for exploring localized dissipative solitary waves. In this paper, we demonstrate a new-class temporal dissipative soliton, i.e., dissipative microwave photonic soliton molecule (DMPSM), in a dual-bandpass OEO. Both the numerical simulation and experiment are conducted to reveal the physical mechanism of DMPSM generation and to evaluate the characteristics of the generated DMPSM sequences. Unlike optical soliton molecules in mode-locked lasers, the formation of DMPSMs arises from the combined action of multiple timescale coupling, nonlinear bistability, and time-delayed feedback in the OEO cavity, where the soliton interval and number in a DMPSM can be well-controlled through varying the multiple timescale variables in the OEO cavity, and the repetition frequency of the DMPSMs can be tuned through changing that of the initially injected perturbation signal. Meanwhile, the generated DMPSM sequence performs with high stability and excellent coherence, which shows enormous application potentials in pulse radar detection, dense microwave comb generation, and neuromorphology.

Design of a logistics warehouse robot positioning and recognition model based on improved EKF and calibration algorithm

Automatic guided vehicles for logistics warehousing are a key link in the construction of intelligent logistics. To improve the positioning accuracy of warehouse robots, we designed an advanced extended Kalman filter method integrating multiple synchronous positioning techniques and map construction methods, and completed the calibration and detection of pallets based on color image information. The results revealed that the proposed multi-innovation enhanced model achieved minimum relative rotation and absolute trajectory errors of 0.13 and 0.09, outperforming existing models. It showcased excellent mapping fidelity and integrity (above 0.9) across various datasets, with a high loop detection success rate (0.91) enhancing map precision. The tray fusion detection algorithm's AUC (area under the curve) reached 0.92, reflecting a balanced accuracy-recall tradeoff. This research offers robust positioning and mapping capabilities in logistics warehousing environments, effectively identifying errors and ensuring pallet accuracy. The detection error and accuracy of this method are better than the other three models, with the lowest average absolute error of 0.32 and the lowest root-mean-square error of 0.27, and the overall error in the detection of pallets is small. The findings provide strong theoretical backing and technical support for advancing intelligent logistics warehousing technology. Precise positioning and identification capabilities enable logistics and warehousing robots to accurately and quickly complete tasks such as access, handling and sorting of goods, greatly improving the efficiency of warehousing operations, promoting the digital transformation and intelligent development of the logistics and warehousing industry, and improving the competitiveness of the industry and the level of service.

Phenotype and outcomes according to loop diuretic use in pulmonary arterial hypertension.

The use of loop diuretics in pulmonary arterial hypertension (PAH) is less frequent compared with heart failure. The clinical and prognostic characteristics of PAH patients according to loop diuretic use remain unexplored. In this study, we retrospectively analysed the characteristics and survival of PAH patients requiring different doses of loop diuretics. Patients diagnosed with PAH between 2001 and 2022 at seven European centres for the management of PAH. According to the median equivalent dose of furosemide in the overall cohort, patients were divided into two subgroups: no/low-dose loop diuretic and high-dose loop diuretic. Primary outcome was 5year all-cause mortality. Among the 397 patients included, 227 (57%) were treated with loop diuretics. Median daily furosemide equivalent dose was 25mg, and accordingly patients were divided in no/low dose (i.e. ≤25mg, n=257, 65%) vs. high dose (i.e. >25mg, n=140, 35%). Patients in the high-dose group were older, more likely to have comorbidities, and had a more severe disease according to the ESC/ERS risk category. Crude 5year survival was significantly shorter in patients in the high-dose group, but after adjustment for age, sex, and risk category, high loop diuretic dose was not significantly associated with the primary outcome. Use of high dose of loop diuretics in PAH is associated with a higher burden of comorbidities, more severe disease, and worse survival. However, in PAH, the need of high loop diuretic dose is a marker of disease severity and not an independent prognostic factor.

Modeling phase separation and composition patterning in FeCrAl alloys at neutron irradiation

Possible scenarios of the microstructural evolution of FeCrAl alloys under neutron irradiation are studied by using the phase-field method. The exploited approach is generalized by considering ballistic mixing of atoms, spatial rearrangement of point defects, and dynamics of their sinks (dislocation loops), self-consistently. Stability diagrams manifesting domains of main control parameters (irradiation temperature, damage rate, atomic relocation distance) governing precipitation are obtained. It is shown that depending on irradiation conditions a precipitation of the Cr-rich α′ -phase proceeds by either phase decomposition or composition patterning mechanism. Statistical analysis of precipitation kinetics is provided by studying precipitate number density, mean precipitate size and Chromium content in α′ -phase for a model alloy Fe-30%Cr-5%Al. A locality of point defects distribution with high concentration and dislocation loops growth are discussed. The hardening change is estimated for two possible scenarios of precipitation. Obtained results are verified with experimental observations. This study provides a deep insight into details of microstructural transformation in FeCrAl alloys during neutron irradiation.

Comparison of high flow nasal cannula therapy to nasal oxygen as a treatment for obstructive sleep apnea in infants.

Obstructive sleep apnea (OSA) in infants is treated with low flow oxygen via nasal cannula (NC), CPAP (continous positive airway pressure), or surgery. Literature supports the use of high flow NC (HFNC) in children in the outpatient setting, however there is limited data on the use of HFNC in infants. The purpose of this study was to compare HFNC and low-flow oxygen as treatments for OSA in infants. A prospective pilot study was performed at two institutions. Infants with primarily OSA underwent a 3-4 h sleep study with HFNC titration at 6-14 lpm for OSA, followed by clinical polysomnography (PSG) for oxygen titration (1/8-1 lpm). Infants with primarily central apnea were excluded. Nine infants were enrolled, with a mean age of 1.3 ± 1.7 months. Average apnea hypopnea index (AHI), average obstructive apnea hypopnea index (OAHI) and average central apnea index during the diagnostic PSG was 17.2 ± 7/h, 13.4 ± 5.4/h and 3.7 ± 4.8/h respectively. OSA improved in 44.4% of subjects with HFNC; the mean AHI and OAHI decreased from 15.6 ± 5.65/h and 12.8 ± 4.4/h on diagnostic PSG to 5.12 ± 2.5/h and 4.25 ± 2.5/h on titration PSG. OSA improved universally with low flow oxygen; the mean AHI decreased from 17.2 ± 7/h on diagnostic PSG to 4.44 ± 3.6/h on titration PSG. HFNC reduced OSA in some infants, though low flow oxygen reduced OSA in all subjects. Respiratory instability (high loop gain) in infants may explain why infants responded to low flow oxygen. More studies are needed to determine if HFNC is beneficial in selected groups of infants with OSA.

Open-source device for high sensitivity magnetic particle spectroscopy, relaxometry, and hysteresis loop tracing.

Magnetic nanoparticles (MNPs) are used extensively across numerous disciples, with applications including Magnetic Particle Imaging (MPI), targeted hyperthermia, deep brain stimulation, immunoassays, and thermometry. The assessment of MNPs, especially those being designed for MPI, is performed with magnetic particle spectrometers, relaxometers, loop tracers, or similar devices. Despite the many applications and the need for particle assessment, there are few consolidated resources for designing or building such a MNP assessment system. Here, we describe the design and performance of an open-source device capable of spectroscopy, relaxometry, and loop tracing. We show example measurements from the device and quantify the detection sensitivity by measuring a dilution series of Synomag-D 70nm (from 0.5 mg Fe/ml to 7 ng Fe/ml) with a 10 mT drive field at 23.8kHz. The device measures 260pg Fe with SNR = 1 and 1.3 ng at SNR = 5 in spectroscopy mode in under one second of measurement time. The system has a dynamic range of 60 μg to 260pg Fe without changing the hardware configuration. As an example application, we characterize Synomag-D's relaxation time constant for drive fields 2-18 mT and compare the magnetization responses of two commonly used MNPs.

A High Dynamic Velocity Locked Loop for the Carrier Tracking of a Wide-Band Hybrid Direct Sequence/Frequency Hopping Spread-Spectrum Signal

For hybrid direct sequence/frequency hopping (DS/FH) spread spectrum signals, even if the relative motion speed between the transmitter and receiver remains constant, the Doppler frequency will vary due to the continuous hopping of the carrier frequency. Under high dynamic conditions, the first-order and second-order change rates of the Doppler frequency attached to the received signal further increase the Doppler frequency agility, making it difficult for the carrier tracking loop to maintain steady-state tracking. To address these issues, a high dynamic velocity locked loop (HD-VLL) is proposed in this paper. Specifically, the accumulated phase tracking error caused by acceleration and jerk is first analyzed. Subsequently, to compensate for this phase tracking error with the system clock, the proposed loop adds an acceleration compensation module and a jerk compensation module. However, this results in the output of the high dynamic loop filter being updated with the system clock, which contradicts the multiplexing design of a traditional loop filter for parallel signal processing, making the hardware implementation of an HD-VLL impractical. Therefore, this contradiction leads us to design an HD-VLL-based multi-carrier NCO (HD-VLL-NCO). The HD-VLL and HD-VLL-NCO are simulated, revealing the HD-VLL’s superior dynamic adaptability and steady-state tracking, while the HD-VLL-NCO achieves comparable accuracy with the appropriate truncation bit width.

Techniques for quantifying endotypes of obstructive sleep apnea

Obstructive sleep apnea (OSA) is the frequent occurrence of apnea and/or hypopnea during sleep, leading to intermittent hypoxia, hypercapnia, and disruption of sleep architecture, further resulting in multisystem damage. The pathophysiological mechanisms include abnormal anatomical structure, low arousal threshold, high loop gain, and poor muscle reactivity, etc. As there are individual differences in the underlying mechanisms of OSA (i.e. endotypes), the effectiveness of treatment and prognosis may also vary according to these characteristics. Understanding the endotype of OSA is critical to understanding which patients are most likely to benefit from non-invasive ventilation therapy. Quantification of endotypes is central to the precision treatment of OSA and may provide the basis for accurate clinical treatment of OSA based on endotypes.

The Changing Role of Loop Diuretics in Heart Failure Management across the Last Century.

Congestion is the main therapeutic target of acute heart failure (HF) treatment, and loop diuretics (LDs) are widely used drugs for this purpose. Despite their extensive use, these agents remain largely understudied in terms of modality administration, treatment duration, and escalation dose for subjects responding poorly to therapy. LDs were initially investigated in several edematous statuses such as cirrhosis, nephrotic syndrome, and congestive HF and initially approved for the treatment of cardiogenic congestion in 1966. Despite the long history and the undoubted role in congestion management, the use of LDs in the acute phase is mostly based on the physician's experience, the oral amount chronically administered, and clinical decongestion response. Recent literature suggests monitoring diuretic activity by the evaluation of daily diuresis, weight loss, and sample urinary sodium assessment after early intravenous LD administration. More recently, the measurement of urinary sodium integrated with urinary and blood creatinine values and fluid status has been suggested as optimal marker to predict whole diuretic efficiency and to target the optimal dose. However, this method is not easily available in the chronic setting or in patients with recurrent hospitalization taking a high loop diuretic amount. Since high loop diuretic dose is related to diuretic resistance (DR) and poorer outcome, additional diuretics acting in different nephron sites are often required. Current sequential nephron blockade can stimulate diuresis by synergic mechanisms. This strategy is attempted in patients with poor response, revealing good results in the early period, but the effects of neuro-endocrine stimulation and electrolyte balance across long-term follow-up are still questioned. This paper reviews the historical course of loop diuretics and highlights the need for a universal approach based on clinical conditions, cardio-renal interactions, and HF phenotypes.

Development of the high temperature PbLi experimental facility for CFETR

Chinese Fusion Engineering and Test Reactor (CFETR) aims to demonstrate the fusion energy production up to 200MW, and finally reach commercial electricity power level 1GW. As one key component, the blanket is in charge of tritium breeding, neutron shielding and energy conversion. The liquid breeder blanket has many important advantages of simpler structure, tritium extraction and fuel replenishment online, as well as the high thermoelectric conversion efficiency. Moreover, the supercritical carbon dioxide (S-CO2) cOoled Lithium-Lead (COOL) blanket has been proposed for CFETR. However, the key issue of MagnetoHydroDynamics (MHD) needs further investigation, especially for the experiments. Therefore, the high temperature PbLi experimental loop is under development, which mainly includes three systems of PbLi, oil and water. The main components include the mechanical pump, main heater, cold trap as well as the superconducting magnet. At the test section, the mass flow rate, temperature and magnetic intensity will be up to 32 kg/s, 700 °C and 3T, respectively. In addition, the ultrasonic doppler velocimeter and potential probe instruments will be adopted to obtain the flow field. The main goal is to establish flow and heat transfer models, which are the critical input for the liquid breeder blanket design and optimization.