High Load Research Articles

Addressing thermal challenges in hydrodynamic bearings: A contemporary review of strategies and technologies

Hydrodynamic bearings are integral components in various industrial sectors, including aerospace, defense technologies, and power generation units etc. Advancements in modern technology have driven the evolution of bearings to withstand the high temperatures, increased speeds, and additional load demands of contemporary operations. Some of the prime consequences of high temperatures include thermal deformation, misalignment, viscosity degradation, reduced oil film thickness, reduced load carrying capacity and premature failure due to bearing seizure. Researchers have rigorously addressed the persistent thermal challenges posed to hydrodynamic bearings, achieving significant advancements over the years. Key developments include innovative bearing pad designs, optimal materials, coating technologies, advanced computational software, novel lubrication methods, and efficient monitoring techniques. The introduction of materials with tailored properties such as high heat conductivity, high strength, and low-friction coatings has greatly enhanced bearing performance. Additionally, advanced computational software like ANSYS CFX, Fluent, and COMSOL, adaptive lubrication methods, and real-time temperature sensors have significantly improved the performance of critical systems, including hydro power plants. This review paper summarizes significant developments and investigations carried out to mitigate thermal effects in hydrodynamic bearings, and hence provides a comprehensive in depth details of the subject matter. Even though there has been a lot of progress in the field of hydrodynamic bearings, continuous research is important to tackle issues related to sustainability, industry-specific obstacles, developing technologies, and dynamic operating conditions.

An Alternative Polymer Material to PVDF Binder and Carbon Additive in Li-Ion Battery Positive Electrode.

Li-ion battery performance relies fundamentally on modulation at the microstructure and interface levels of the composite electrodes. Correspondingly, the binder is a crucial component for mechanical integrity of the electrode, serving to interconnect the active material and conductive additive and to firmly attach this composite to the current collector. However, the commonly used poly(vinylidenefluoride) (PVDF) binder presents several limitations, including the use of toxic solvent during processing, a low electrical conductivity which for compensation requires the addition of carbon black, and weak interactions with active materials and collectors. This study investigates Poly(3,4-ethylenedioxythiophene):poly[(4-styrenesulfonyl) (trifluoromethylsulfonyl) imide] (PEDOT:PSSTFSI) as an alternative binder and conductive additive, in replacement of both PVDF and carbon black, in Li-ion batteries with LiFe0.4Mn0.6PO4 at the positive electrode. Complex PEDOT:PSSTFSI significantly improves the electronic conductivity and lithium diffusion coefficient within the electrode, in comparison to standard PVDF binder and carbon black. This enhances significantly the electrochemical performance at high C-rates and for high active mass loading electrodes. Furthermore, an excellent long-range cyclability is achieved.

Research Progress of Immune Mechanisms Related to Persistent HPV Infection in CIN after Cervical Conization

Persistent human papillomavirus (HPV) infection is associated with the grading of cervicalintraepithelial neoplasia (CIN), high-risk HPV infection, multiple HPV infections, high HPV load,HPV infection of surgical margin, and age in CIN after conization. The immune mechanism iscomplex and is primarily related to vaginal microecology disorders, immune escape, immuneresponse impairment, and the release of regulatory cytokines. Currently, the treatment methods forpostoperative persistent HPV infection include surgical treatment, antiviral treatment, vaccination,and other approaches.

Multifunctional nanomaterials composed entirely of active pharmaceutical ingredients for synergistically enhanced antitumor and antibacterial effects

IntroductionMultifunctional nanomaterials are emerging as promising tools for treating both cancer and bacterial infections. However, integrating dual therapeutic capabilities into a single system remains challenging. This study presents multifunctional nanoparticles (ECI-NPs) based on Epigallocatechin gallate (EGCG) oligomers, Curcumin (CUR), and Indocyanine Green (ICG) for combined cancer and bacterial treatment.MethodsECI-NPs were synthesized via oxidative coupling of EGCG, CUR, and ICG. The nanoparticles were characterized for stability, size, drug loading, and release profiles. Cellular uptake, phototoxicity in melanoma cells, and antibacterial activity against Escherichia coli and Staphylococcus aureus were also evaluated.ResultsECI-NPs demonstrated optimal stability, high drug loading, and controlled release. Cellular studies showed increased uptake and greater phototoxicity in melanoma cells compared to free drugs. ECI-NPs also exhibited enhanced anticancer effects and strong antibacterial activity, outperforming the individual components.DiscussionThe polyphenol-based ECI-NPs offer synergistic therapeutic effects, overcoming the limitations of free drugs in terms of solubility and efficacy. This dual-function platform shows potential for broader biomedical applications, addressing challenges in cancer and bacterial infections. Further research will focus on in vivo studies and clinical translation.

Thiacloprid-silica nano-delivery system enhances toxicity against Aphis gossypii and improves non-target biosafety

Nanotechnology aligns with the requirements of sustainable development of agriculture, and nano-pesticides offer a promising approach to controlling agricultural pests and increasing productivity. Non-target predators also play a crucial role in pest controls and enhancing the efficacy of pesticide on target organisms. Reducing the toxicity of pesticides to non-target organisms is key to of coordinating chemical control and biological control methods. Therefore, it is essential to assess the toxicity of nano-pesticides on non-target predators. In this study, a carbon dots-doped mesoporous silica nano-delivery system (Thi@CD-MSN) was successfully developed using CD-MSN as carrier material and thiacloprid (Thi) as a model pesticide. The results demonstrated that the synthesized Thi@CD-MSN exhibited a relatively high loading efficiency (33.58%). Laboratory bioassay experiments revealed that Thi@CD-MSN demonstrated effective insecticidal activity (LC50 = 21.67 mg/L) in controlling Aphis gossypii Glover. Besides, the acute toxicity of Thi@CD-MSN on Chrysoperla pallens larvae was significantly lower than that of Thi, as was its toxicity to 4T1 cells. These findings suggest that CD-MSN can serve as an ecological safety carrier for pesticide delivery, improving the effective utilization of Thi while reducing the risks to non-target predators. These results are essential for comprehending the effects of nano-pesticides on non-target predators, providing informative data for implementing biological and chemical control strategies. It strengthens the safety evaluation of nano-pesticides.

Stability‐Enhanced Variable Stiffness Metamaterial with Controllable Force‐Transferring Path

AbstractSelf‐contact variable stiffness (SVS) metamaterial offers specific patterns of elastic strain energy storage by changing its force‐transferring path. The change of the elastic strain energy storage patterns further influences the stiffness variation of the SVS metamaterials. However, challenges still arise because typically fabricated SVS metamaterials inevitably contain structural irregularities, eccentricities, and defects. These microstructural imperfections impede the stable generation of designed strain energy storage patterns in the metamaterial, implying that the SVS metamaterials cannot achieve expected stiffness variations. To address this burning question, an SVS metamaterial/meta‐structure design paradigm with eccentric unit designs is proposed, which can realize both stable stiffness variations and high load‐bearing. The theoretical, simulation, and experimental results demonstrate that the SVS chain meta‐structure achieves ≈110 times stiffness variation between the low and high loading conditions. Its load‐bearing can reach more than 1500 N when the meta‐structure falls into the high stiffness stage. Furthermore, some typical functions are demonstrated using the stability‐enhanced SVS metamaterial, including customized mechanical protections for human joints and information transformation regulated by remote mechanical input signals. The results can provide a useful solution for generating a more feasible stability‐enhanced SVS metamaterial/meta‐structure and promote their potential applications in aerospace, medical devices, and robotics.

Ethyl levulinate regulates traditional sulfolane biphasic absorbent for energy-efficient CO2 capture

Traditional CO2 biphasic absorbents currently suffer from problems such as high initial phase separation loading, poor product distribution selectivity, and weak dynamic phase separation ability, which limit their potential for industrial applications. This study developed a biphasic absorbent regulated by dual physical solvents by introducing partial ethyl levulinate (EL) into a sulfolane biphasic system. The optimal composition of this system was 30 wt% 1-amino-2-propanol (MIPA), 20 wt% sulfolane and 30 wt% EL. Under dual physical solvent conditions, strong electrostatic attraction between MIPA and CO2 promoted generation of MIPA zwitterions and carbamate. Analysis of the interactions between different product components through electrostatic potentials and with an independent gradient model based on Hirshfeld's partitioning revealed only extremely weak van der Waals force-driven interactions between the reaction products and EL. These interactions substantially reduced the initial phase separation loading and offered precise control over phase transition behavior. Compared with MIPA/sulfolane system, the MIPA/sulfolane/EL system achieved a 48.9 % lower initial phase separation loading, an 11.6 % lower proportion of saturated rich phase volume, a 10.1 % higher CO2-rich phase loading, and a 6.7 % lower viscosity. The excellent dynamic phase separation performance was verified using a customized device and the energy consumption for CO2 regeneration decreased to 2.2 GJ/t CO2.

Structural Design of Hybrid Fillers in a Polymer Matrix for Advanced Electromagnetic Interference Shielding

The rapid development of modern advanced electronic systems has created a pressing need for multifunctional polymer composites that can withstand external adversities such as electromagnetic waves, flames, and mechanical stresses. Although these requirements can be satisfied by incorporating different types of fillers, high filler loadings often lead to issues such as poor processability and increased material costs. Herein, a multifunctional polyamide‐6 composite is introduced using a carbon‐fiber flame‐retardant hybrid filler to design a next‐generation electromagnetic interference (EMI) shielding system. Based on the synergistic effect of the functionality and structural arrangement of these fillers in the composite, the EMI shielding system demonstrates high EMI shielding performance, improved mechanical properties, and excellent flame retardancy despite the low filler content. The scalability and multifunctionality of the proposed system highlight its potential for use in next‐generation applications, such as electric vehicles, aerospace, and 5G/6G telecommunications.

Developing Rapid-Charging Li-S Batteries via "Target Catalysis" of Cations and Anions Modified Electrocatalyst.

The shuttle effect and sluggish sulfur reduction reaction have resulted in significantly low efficiency and poor high current cycling stability in lithium-sulfur batteries, impeding their practical applications. To address these challenges, the introduction of Ni cations into MoS2 grown on reduced graphene oxide (MoS2/rGO) induces the formation of impurity energy levels between the conduction and valence bands of MoS2. Additionally, the introduction of anionic Se expands the interlayer spacing, enhances intrinsic conductivity, and improves ion diffusion rates. Simultaneously introducing anionic and cationic species into the MoS2/rGO causes the center of the d-band to shift upward, reducing the occupancy of electrons in antibonding orbitals. This modification leads to a rearrangement of the electronic structure of Mo, accelerating the redox reactions of lithium polysulfides. It particularly enhances the binding energy and lowers the conversion energy barrier of Li2S4. Consequently, the Li||S coin cell with the Ni-MoSSe/rGO cathode demonstrates an initial capacity of 446 mAh g-1 at 20 C, with a remarkable capacity retention of ≈96.7% after 200 cycles. Moreover, even under high sulfur loading conditions (6.45 mg cm-2) and a low electrolyte/sulfur ratio (5.4 µL mg-2), it maintains a high areal capacity of 6.42 mAh cm-2.

Distractor filtering and task load in working memory training in healthy older adults.

Filtering efficiency (FE) has been suggested as a task-related process of working memory (WM) in older adults, but the interaction of distractors with WM when implemented as a training to improve WM capacity is unclear. To investigate the effect of manipulations of WM and/or FE load in a multicomponent model-based WM training in improving WM capacity. 205 healthy older adults (129 women; aged 64.0 ± 8.3 years) were randomised into three WM training groups with manipulations of WM and FE load (high WM; low FE load, high WM; high FE load and low WM; high FE load). All groups underwent three online cognitive testing sessions and twelve 40-min training sessions over three weeks using the SmartBrain smartphone application. WM capacity was measured with complex span tasks and FE using the Change Detection Task. Linear mixed-effect models adjusted for age, sex, education and pre-baseline performance showed increased WM capacity post-training, but no difference between groups. While both distractors and WM are needed to improve WM in the absence of distraction, manipulations of the FE and WM load do not influence improvements following training.

Earthworm activity reduces bacterial pathogen loads in sewage sludge.

Wastewater processing plants (WWTPs) produce large amounts of sewage sludge that are mainly disposed of on the land. This represents a health hazard due to the high loads of human bacterial pathogens (HBPs) the sludge generally contains. Vermicomposting, a mesophilic process, can reduce HBPs in organic wastes. This raises the question as to how earthworms eliminate HBPs. We aimed to determine whether earthworms reduce the levels or eliminate HBPs from sewage sludge and to establish whether the reduction/elimination occur during active (earthworm casts) or maturation (vermicompost) stages of vermicomposting. To this end, we analyzed HBPs (Escherichia coli O157, Listeria monocytogenes, Salmonella spp., and total E. coli) in sewage sludge samples from three WWTPs and the fresh earthworm casts and vermicomposts by using qPCR, to assess the impact of earthworms on reducing and/or eliminating HBPs. We did not detect either Salmonella spp. nor E. coli O157 in any of the samples. Earthworms removed or significantly reduced the amounts of E. coli and L. monocytogenes (mean relative abundances of 2.4 × 10-7 and 1.5 × 10-8 respectively) in the sewage sludge. Thus, the abundance of these HBPs was lower (or not present) in casts than in sewage sludge. This was also observed in vermicomposts (95% and 43% reduction in E. coli abundance in casts and vermicompost, respectively). Finally, our findings indicate that vermicompost derived from sewage sludge meets the requirements of organic fertilizers at least regarding the microbial pathogen content. Thus, vermicomposting seems to be a promising technique for managing municipal waste.

Identification of non-circular profiles in hydrodynamic journal bearings

Hydrodynamic bearings, especially cylindrical radial plain journal bearings, are widely utilized in industry for their high load capacity and low friction energy losses. However, these bearings are prone to faults such as wear and ovalization, which can deform their circular profile and affect their vibrational response. Detecting these faults is essential to reduce their impact on production. This study introduces a methodology to identify hydrodynamic bearings with non-circular profiles. The bearing model and its numerical solution are implemented using the Finite Volume Method, with the effects of failures incorporated into a rotating system modeled by the Finite Element Method. A dataset is generated to reflect three common failure conditions in industrial applications: wear, ovalization, and a combination of ovalization with wear. The authors used this dataset to train a Multilayer Perceptron (MLP) neural network, which can identify the bearing profile shape based on specific attributes of the dynamic responses. The identification tests for the three fault conditions demonstrated high accuracy, particularly in distinguishing between ovalization and wear.

Hierarchical porous MnO2/3D graphene oxide/carbon cloth used as practical mass-loading supercapacitor electrodes

Supercapacitor electrodes with high mass loading of active materials often exhibit low areal capacitances due to stacking problem of heavy loading. In this study, we present a 3D hierarchical porous graphene oxide (GO) nanosheets grown on carbon cloth (CC), termed as 3DGO/CC. With its high specific surface area, ample space to accommodate the volume expansion, and ideal ion transfer pathways, 3DGO/CC emerges as a promising candidate for high-loading active materials. Utilized as an efficient support matrix for MnO2 loading, an ultrahigh mass loading of MnO2 (17.32 mg cm−2) is deposited onto the surface of 3DGO, forming a MnO2/3DGO/CC electrode without stacking. The conductive porous 3DGO/CC composite scaffold optimizes the utilization of MnO2 active material, resulting in a high areal capacitance. An optimal electrode achieves an impressive areal capacitance of 3.18 F cm−2 at 1 mA cm−2 which was 4.1 times higher than that of the pristine MnO2/CC electrode and maintains a retention of 74.5 % at 32-fold current density. Ultimately, the assembled asymmetric supercapacitor demonstrates a superior electrochemical performance with a maximum energy density of 495.36 μWh cm−2 at the power density of 1.02 mW cm−2. This study supplies an efficient method for preparing MnO2-based electrodes with excellent areal capacitance.

Exploring the Interplay of Bud Load and Pruning Type in Shaping ‘Xinomavro’ (Vitis vinifera L.) Vine Growth, Yield, and Berry Composition

‘Xinomavro’ (V. vinifera L.) is an important native red wine grape variety in Northern Greece, particularly in PDO (protected designation of origin) regions. Despite its significance, there is limited research on the effects of pruning type and severity on ‘Xinomavro’ vine physiology, yield, and berry quality across diverse environmental conditions. This study aimed to address this knowledge gap and provide growers with crucial information for optimizing vineyard management practices. The study was conducted over two consecutive years (2016 and 2017) in a vineyard in Thessaloniki, Northern Greece. Four treatments (B12: 12 buds on 6 spurs, B24: 24 buds on 12 spurs, M12: 12 buds on 2 canes, and M24: 24 buds on 4 canes) combining two bud load levels (12 or 24 count nodes) and two pruning types (short spurs or long canes) were applied to ‘Xinomavro’ vines in a complete block randomized design. The vine water status, gas exchange, canopy characteristics, yield components, and berry composition were measured. Bud load and pruning type significantly influenced vine canopy development, microclimate, and yield components. Short pruning with high bud load (B24) resulted in denser canopies and higher yields, whereas cane pruning (M12 and M24) led to more open canopies and improved berry quality indicators. Treatment effects on berry composition were inconsistent across years but showed a tendency for higher anthocyanin and total phenol content in cane-pruned vines. This study demonstrates that pruning type (short or long fruiting units) may have a greater impact on vine growth, yield, and berry composition than bud load alone in ‘Xinomavro’ vines. Cane pruning appears to be a more effective strategy for achieving vine balance and potentially improving grape quality under given experimental conditions.

Fatigue notch strengthening effect of nickel-based single crystal superalloys under different stress ratios

Nickel-based single crystal superalloys (Ni-SXs) are widely used in turbine blades of aircraft engines. With the increasing demand for higher temperature-bearing capacity, the introduction of film cooling holes, impingement holes, and trailing edge slots for cooling induces stress concentration, which compromises the structural integrity of the blades, generates complex multiaxial stress states, and adversely affects their operational performance. In this study, Ni-SXs, DD6, was utilized to investigate the influence of stress ratios on fatigue performance under complex stress states. Low cycle fatigue (LCF) tests were carried out at different stress ratios with stress concentration coefficient Kt = 1.0, 2.0 and 3.0. The results indicate that the notched specimens exhibit a significant fatigue notch strengthening effect under high stress ratios. The fracture surface and microstructure also indicate that under high stress ratios loading, the notches exhibit significant creep failure characteristics. This means that the main cause of fatigue notch strengthening is similar to creep notch strengthening effect. A macroscopic anisotropic constitutive model coupled with damage was developed and applied to finite element analysis of notched specimens. The results demonstrate that as the stress ratio rises, the stress relaxation effect at the notch becomes more pronounced, yet the level of damage diminishes. Additionally, a stress-equivalent model based on Bridgman stress was proposed, which effectively unifies the lifetime trends of notched and smooth specimens, predicting lifetimes within a threefold error band.

A prospective, multicenter study of hepatitis B birth-dose vaccine with or without hepatitis B immunoglobulin in preventing mother-to-child transmission of hepatitis B virus in Ethiopia

BackgroundHistorically, mother-to-child transmission (MTCT) of hepatitis B virus (HBV) was considered uncommon in Africa, leading to a reluctant attitude to birth-dose HBV vaccination on the continent. As a randomized trial would be unethical, real-life data are needed to assess the effect of HBV birth-dose vaccine in Africa. MethodsA multicenter, prospective, observational study of hepatitis B surface antigen (HBsAg)-positive pregnant women and their infants was carried out in Ethiopia, from January 2019 to May 2021. Pregnant women were screened for HBsAg and HIV as part of routine antenatal care and/or delivery, and HBsAg-positive HIV-negative pregnant women were included in the study. HBV birth-dose vaccine and hepatitis B immunoglobulin (HBIg) were recommended but not all newborns received it as it was not national policy. All infants, however, received the pentavalent HBV vaccine at 6, 10, and 14 weeks of age. Vaccination status was confirmed from delivery ward charts and infant vaccination certificates. Infants were tested for HBsAg at 9 months of age and a positive result was taken as evidence of MTCT. FindingsOf 290 HBsAg-positive pregnant women, 168 mother/infant pairs returned for their 9-month follow-up visit and were included in this analysis. Two of 112 (1.8 %) infants who received birth-dose vaccine with HBIg, and 2 of 23 (8.7 %) who received birth-dose vaccine alone were HBsAg positive at nine months of age, compared to 8 of 33 (24.2 %) who received neither vaccine nor HBIg at birth (p = 0.002). High maternal viral load (>200,000 IU/ml; adjusted odds ratio [AOR] 10.4; 95 % confidence interval [CI] 1.2–92.1) and not receiving HBV birth-dose vaccine nor HBIg (AOR 29.2; 95 % CI 4.0–211.3) were independent predictors of MTCT. InterpretationBirth-dose HBV vaccine with or without HBIg significantly reduced the risk of MTCT of HBV in Ethiopia. Improved coverage of birth-dose HBV vaccine should be an urgent priority.

Carrier-Free Biomimetic Organic Nanoparticles with Super-High Drug Loading for Targeted NIR-II Excitable Triple-Modal Bioimaging and Phototheranostics.

Multimodal near-infrared II (NIR-II) theranostics combined with nanotechnology have emerged as promising treatments for cancer due to their noninvasive and high spatiotemporal nature. Traditional NIR-II theranostics typically comprise useless and massive inert carriers, resulting in low drug loading capacity, reduced therapeutic effects, and potential biotoxicity. To overcome these limitations, this work reports carrier-free NIR-II theranostics simultaneously with high drug loading capacity and multimodal NIR-II imaging capabilities for cancer phototheranostics in the NIR-II window. Carrier-free BTA nanoparticles (NPs) are prepared by self-assembling the NIR-II responsive conjugated oligomer BTA without adding coating agents; these NPs exhibited 100% drug loading and high-performance NIR-II theranostic capabilities. Cancer cell membranes are camouflaged on carrier-free BTA NPs to provide homologous targeting ability, enhanced stability, and 77.8% drug loading. Both in vitro and in vivo studies have indicated that biomimetic NPs provide efficient triple-modal guidance for NIR-II fluorescence, photoacoustic, and photothermal imaging and complete tumor elimination via photothermal therapy (PTT). Additionally, theranostics-based treatments with good biosecurity are demonstrated. This study contributes a new strategy for the design of high-drug-loading NIR-II theranostics and further promotes the clinical translation of theranostic agents.

An Evaluation of Biochar Derived from Agro-Industrial Waste as an Alternative Material for the Elimination of Pathogenic Load from Water

The contamination of water bodies is becoming more frequent due to uncontrolled discharges into them, including those of domestic or industrial wastewater (WW) characterized by the presence of heavy metals, a high pathogenic load, pesticides, and pharmaceuticals, among other pollutants, which represent a risk to both humans and the health of the ecosystem. Consequently, conventional water treatment processes have been implemented. However, they are not efficient enough. In this regard, exploring and analyzing new alternatives and sustainable systems that efficiently degrade the different pollutants found in WW are required, and biochar can be considered as an attractive treatment option, since it is an adsorbent carbonaceous material that allows for the removal of several pollutants. The generation and use of biochar contribute to the promotion of the circular bioeconomy and the achievement of sustainable development goals by enhancing the reuse and recycling of agricultural and agro-industrial waste as raw material for its production. The objective of this work is to evaluate the utilization of biochar as an alternative material for the elimination of the pathogenic load in water.

Design and vibration test of first mirror mount assembly for ITER divertor VUV spectrometer

The divertor vacuum ultraviolet (VUV) spectrometer is a diagnostic system in the ITER tokamak, monitoring impurity content and behavior in the divertor region. The first mirror of the spectrometer, made of silicon carbide (SiC), is exposed to harsh environmental conditions, including high temperatures and significant inertial loads from electromagnetic disruption events. To ensure its reliable performance, we have designed and tested a robust mirror holder assembly. This paper introduces a novel design of the first mirror holder assembly for the ITER divertor VUV spectrometer and presents the results from comprehensive vibration tests conducted on a full-scale mock-up. The design features a double-holder structure with spring plate assemblies to accommodate thermal expansion and resist vibrational loads. The mock-up underwent a series of resonance search, sine dwell, and random vibration tests, replicating the expected loads during vertical displacement events in ITER. The mirror holder assembly and the dummy mirror successfully withstood the vibration tests without damage, validating the design for the ITER environment. The results demonstrate the robustness and reliability of the mirror holder assembly, ensuring the accurate and reliable operation of the divertor VUV spectrometer in ITER.

Management and Performance Analysis of Textile Effluent Treatment Plants in Laundries of The Local Productive Arrangement of Pernambuco

Objective: The present study aimed to assess 10 laundries for compliance with Brazilian legislation Theoretical Framework: The Local Productive Arrangement (APL) of Pernambuco plays a crucial role in job creation and economic growth in the state. However, the jeans beneficiation process consumes a significant amount of water and involves the use of various chemicals, which generate effluents with high organic loads, color, and toxicity. This has caused serious environmental problems. The issue is exacerbated during prolonged drought periods and by intermittent river flows, which reduce the natural self-purification capacity of the rivers. Method: A total of 334 influent and effluent samples were collected. All the laundries studied employed physicochemical treatment processes (flocculation followed by sedimentation). Results and Discussion: The WWTPs proved to be efficient in the removal of settleable solids, demonstrating that the coagulation and flocculation processes are effective for this purpose, even in scenarios with management deficiencies. On the other hand, poor operation of the treatment plants has resulted in other parameters, such as pH, oils, and greases, being out of compliance with current legislation. The efficiency in reducing BOD was highly inconsistent, with fluctuations ranging from over 90% efficiency to negative values, indicating significant operational issues. High concentrations of organic matter can compromise oxygen levels in the receiving bodies. It is essential to intensify monitoring and improve treatment processes to mitigate negative environmental impacts.