High Hydrogen Evolution Reaction Research Articles

Phase Engineering and Dispersion Stabilization of Cobalt toward Enhanced Hydrogen Evolution.

Phase engineering is promising to increase the intrinsic activity of the catalyst toward hydrogen evolution reaction (HER). However, the polymorphism interface is unstable due to the presence of metastable phases. Herein, phase engineering and dispersion stabilization are applied simultaneously to boost the HER activity of cobalt without sacrificing the stability. A fast and facile approach (plasma cathodic electro deposition) is developed to prepare cobalt film with a hetero-phase structure. The polymorphs of cobalt are realized through reduced stacking fault energy due to the doping of Mo, and the high temperature treatment resulted from the plasma discharge. Meanwhile, homogeneously dispersed oxide/carbide nanoparticles are produced from the reaction of plasma-induced oxygen/carbon atoms with electro-deposited metal. The existence of rich polymorphism interface and oxide/carbide help to facilitate H2 production by the tuning of electronic structure and the increase of active sites. Furthermore, oxide/carbide dispersoid effectively prevents the phase transition through a pinning effect on the grain boundary. As-prepared Co-hybrid/CoO_MoC exhibits both high HER activity and robust stability (44mV at 10mA cm-2, Tafel slope of 53.2mV dec-1, no degradation after 100 h test). The work reported here provides an alternate approach to the design of advanced HER catalysts for real application.

Transient Electro‐Graphitization of MOFs Affecting the Crystallization of Ruthenium Nanoclusters for Highly Efficient Hydrogen Evolution

AbstractFine control over the graphitization level of carbonized nanostructures can play a strategic role in tuning the crystallization of supported nanocatalysts, thereby modulating the kinetics of catalysis. However, realizing the synergistic interplay of graphitization‐tunable support and supported catalysts poses a significant challenge. This study proposes a current pulse‐induced ultrafast strategy for developing MOF‐derived graphitic nano‐leaves (GNL) and supported ultrafine ruthenium nanoclusters exhibiting selective crystallization states depending on the tunable graphitization level of GNL. The resulting ultrafine (≈0.7 nm) amorphous‐ruthenium nanoclusters linked with GNL (a‐Ru@GNL500) exhibit state‐of‐the‐art performance in the hydrogen evolution reaction (HER), requiring very low overpotentials of only 23.0 and 285.0 mV to achieve current densities of 10 and 500 mA cm−2, respectively. Furthermore, a‐Ru@GNL500 demonstrates exceptional operational stability for 100 h under high HER currents of 200 and 400 mA cm−2. Density functional theory reveals that the unique electronic structure of a‐Ru and the cooperative effect of cobalt embedded in the graphitic layer lower the occupancy of the antibonding orbital, resulting in an accelerated HER process. Additionally, the unique electronic structure, highly conducting GNL, and efficient bubble release dynamics of super‐aerophobic a‐Ru@GNL500 contribute to reduced overpotentials, particularly at high HER current densities.

Hierarchical multiphase heterointerfaces Ni2P–CoP/MoO2 catalyst for efficient and stable hydrogen evolution reaction over the entire pH range

The development of pH-versatile, high-performing, and durable catalysts for hydrogen evolution reaction (HER) is crucial to satisfy the complex environment of water electrolysis industry. Herein, we present the synthesis of a hierarchical multiphase heterointerfaces Ni2P–CoP/MoO2 nanocatalyst with exceptionally high HER activity in the entire pH range through a facile three-step process involved hydrothermal, electrodeposition, and in situ phosphating treatment. Experiments and characterization revealed the strong electronic interactions among the phases of Ni2P, CoP, and MoO2, which endowed the Ni2P–CoP/MoO2 with high hydrogen evolution activity in different pH ranges. Meanwhile, the layered structure of our as-prepared catalyst makes the massive exposure of active sites. As a result, the Ni2P–CoP/MoO2 catalyst shows remarkable performance, requiring mere overpotentials of 33, 41, and 23 mV to drive 10 mA cm−2 in 1 M KOH, 1 M phosphate buffer solution, 0.5 M H2SO4, respectively. Moreover, the catalyst exhibits excellent stability in the chronopotentialmetry test under different pH electrolyte. Impressively, the Ni2P–CoP/MoO2 catalyst coupled with Ni–Fe LDH to form an overall water splitting system only require 1.50 V to drive 10 mA cm−2. Furthermore, this system actuated by wind and solar energy can stably undergo a continuous production of hydrogen and oxygen.

Hydrogenation of Covalent Organic Framework Induces Conjugated π Bonds and Electronic Topological Transition to Enhance Hydrogen Evolution Catalysis.

Recently, many topological materials have been discovered as promising electrocatalysts in chemical conversion processes and energy storage. However, it remains unclear how the topological electronic states specifically modulate the catalytic reaction. Here, the two-dimensional metal phthalocyanine-based covalent organic framework (MPc-COF) is studied by ab initio thermodynamic calculations to clearly reveal the promotional effect on the electrochemical hydrogen evolution reaction (HER) induced by topological gapless bands (TGBs). We find that the prehydrogenated (and fluorinated) H4CdPc-COF(F) shows the best HER performance, with 0.016 V (near zero) overpotential. By tracking changes to the electronic structure and free energy as the prehydrogenation and HER processes occur, we are able to separately attribute the high HER efficiency in part due to the increase of the electron bath by donating electrons to the conjugated π bonds and also to the existence of TGBs. Specifically, the significant catalytic promotion by TGBs is proven to decrease the free energy by 0.218 eV to near zero. When the TGBs are destroyed, e.g., by replacing N with P and opening a band gap, the HER efficiency is reduced. This study opens avenues for deterministically harnessing topological band features to improve electrocatalysis.

Crystalline Phase Engineering to Modulate the Interfacial Interaction of the Ruthenium/Molybdenum Carbide for Acidic Hydrogen Evolution.

Ruthenium (Ru) is an ideal substitute to commercial Pt/C for the acidic hydrogen evolution reaction (HER), but it still suffers from undesirable activity due to the strong adsorption free energy of H* (ΔGH*). Herein, we propose crystalline phase engineering by loading Ru clusters on precisely prepared cubic and hexagonal molybdenum carbide (α-MoC/β-Mo2C) supports to modulate the interfacial interactions and achieve high HER activity. Advanced spectroscopies demonstrate that Ru on β-Mo2C shows a lower valence state and withdraws more electrons from the support than that of Ru on α-MoC, indicative of a strong interfacial interaction. Density functional theory reveals that the ΔGH* of Ru/β-Mo2C approaches 0 eV, illuminating an enhancement mechanism at the Ru/β-Mo2C interface. The resultant Ru/β-Mo2C exhibits an encouraging performance in a proton exchange membrane water electrolyzer with a low cell voltage (1.58 V@ 1.0 A cm-2) and long stability (500 h@ 1.0 A cm-2).

Electrocatalyst for hydrogen evolution and H2O2 recognition on composite carbon paste electrodes with three new Ag(I) MOFs

Three new Ag(I) metal-organic frameworks (Ag-MOFs) containing bisbenzimidazole-derived ligand, namely, {[Ag2(L)(TP)](H2O)}n (1), {[Ag2(L)(HBTC))(H2O)](CH3CH2OH)(H2O)}n (2) and {[Ag4(L)2(IP)2](CH3CN)3(H2O)16}n (3) (L = bis(1-(pyridin-4-ylmethyl)-benzimidazol-2-yl methyl) ether, TP = Terephthalate, BTC = Benzenetricarboxylate, IP = Isophthalate), have been synthesized by volatilization method and systematic adjustment of solvent and aromatic polyacid co-ligand. Single crystal structural analysis showed that although three Ag-MOFs have a three-dimensional (3D) network backbone structure, their topological structures are different. Electrocatalytic hydrogen evolution reaction (HER) of carbon paste composite electrodes (Ag-MOF-1∼3@CPE) prepared by mixing graphite powder with Ag-MOFs were investigated in 0.5 M H2SO4 electrolyte. The HER measurements show that the overpotential η10293K of Ag-MOF-1∼3@CPE are -634, -533 and -615 mV compared with sCPCE (blank electrode, -966 mV), and the Tafel slope of sCPCE and Ag-MOF-1∼3@CPE were 276, 251, 123 and 220 mV dec−1, respectively. The results prove that Ag-MOF-1∼3@CPE could effectively catalyze and accelerate the HER behavior, with electrocatalytic activity order being Ag-MOF-2@CPE > Ag-MOF-3@CPE > Ag-MOF-1@CPE > sCPE. The highest HER activity of Ag-MOF-2@CPE can be attributed to the fact that Ag-MOF-2 contains coordination water molecule, while the higher activity of Ag-MOF-3@CPE than Ag-MOF-1@CPE is due to steric hindrance. Furthermore, the recognition performance of Ag-MOF-1∼3@CPE for H2O2 was further studied by chronoamperometry in 0.2 M phosphate buffer solution (PBS, pH = 6). The three sensors can detect H2O2 in a linear range from 0.5 μM to 4 mM with sensitivities of 103, 34.5 and 138 μA·mM−1·cm−2, and also revealed long-term stability and good selectivity. Our study provides a new approach for designing efficient, non-precious metal electrochemical catalysts.

Boosting electrocatalytic activity of Ru for hydrogen evolution through engineering Ru on multiple interfaces of 1T-MoS2 and carbon

Ru is considered as highly efficient Pt-free catalyst in hydrogen evolution reaction (HER) due to its fast water dissociation kinetics. However, its strong affinity to OH* and H* greatly limits its HER performance. Herein, Ru nanoparticles (NPs) anchored on the mixed substrates of MoS2 (different 1T contents) and carbon fiber paper (Ru@MoS2-1T%/CFP) is designed and synthesized with three kinds of interfaces (MoS2/CFP, Ru/CFP, and Ru/MoS2) as excellent electrocatalyst for HER. Particularly, the Ru2@MoS2-85%/CFP presents superb HER performance with overpotential of 19 mV at 10 mA cm−2, a low Tafel slope of 29 mV dec–1 and stability of up to 10 days, outperforming reported Ru-based catalysts and Pt/C. The experimental and DFT studies disclose that the hydroxyl migration-assisted dissociation of water and interface-engineering desorption of H2 process, occurring at the mutually hybridized interface sites of Ru/MoS2/CFP, simultaneously speed Volmer/Tafel processes. Compared to Ru, the stronger interaction of 1T-MoS2 to OH* makes OH* migrate from Ru to MoS2, alleviating the poisoning of Ru sites. Also, only Ru NPs close to the interface of 1T-MoS2/CFP can achieve an optimal hydrogen adsorption energy for high HER performance. This designed strategy provides a novel idea for preparing supported Ru catalysts for excellent HER performance.

Reversing the Interfacial Electric Field in Metal Phosphide Heterojunction by Fe-Doping for Large-Current Oxygen Evolution Reaction.

Developing non-precious-metal electrocatalysts that can operate with a low overpotential at a high current density for industrial application is challenging. Heterogeneous bimetallic phosphides have attracted much interest. Despite high hydrogen evolution reaction (HER) performance, the ordinary oxygen evolution reaction (OER) performance hinders their practical use. Herein, it is shown that Fe-doping reverses and enlarges the interfacial electrical field at the heterojunction, turning the H intermediate favorable binding sites for HER into O intermediate favorable sites for OER. Specifically, the self-supported heterojunction catalysts on nickel foam (CoP@Ni2P/NF and Fe-CoP@Fe-Ni2P/NF) are readily synthesized. They only require the overpotentials of 266 and 274mV to drive a large current density of 1000mA cm-2 (j1000) for HER and OER, respectively. Furthermore, a water splitting cell equipped with these electrodes only requires a voltage of 1.724V to drive j1000 with excellent durability, demonstrating the potential of industrial application. This work offers new insights on interfacial engineering for heterojunction catalysts.

Effect of nickel sulfide catalysts with different morphologies on high efficiency alkaline hydrogen evolution reaction

An important area of research is the creation of non-precious metal catalysts with increased catalytic activity and stability for the electrolysis of water to produce hydrogen. A viable and effective method for altering the surface structure of electrocatalysts and improving their performance is morphology control. In this study, the amount of ammonium fluoride (NH4F) used in the hydrothermal process was changed to create a range of nickel sulfide (NiS) electrocatalysts with tunable morphologies. The improved NiS catalyst demonstrated exceptional performance in the hydrogen evolution process (HER) because of its expansive active area, elevated surface activity, and gas diffusion channels. In particular, it showed a low Tafel slope of 65.90 mV dec−1 in 1 M KOH electrolyte solution and an overpotential of 97 mV at a current density of 10 mA cm−2. Remarkably, the NiS electrocatalyst maintained its excellent HER performance even after 60-hour durability test. These findings underscore the significance and feasibility of morphology control in achieving desirable catalytic activity.

Electrochemical deposition of nickel sulfide catalysts on commercial carbon rods as low-cost electrodes for hydrogen generation

Nowadays, the challenge of the world and the scientific community is to find and effectively use renewable energy sources. One of the renewable energy research subjects that has been hotly discussed recently is the water-splitting reaction to produce hydrogen. In this study, we focus on fabricating nickel sulfide (NiS) materials deposited on commercial carbon rod (CR) substrates and using them as electrodes for the electrochemical water-splitting reaction to produce hydrogen gas. In detail, NiS materials were decorated on commercial carbon rods (NiS/CR) by cyclic voltammetry electrochemical deposition with a potential range from 0.2 to −1.2 V (versus Ag/AgCl), a scan rate of 10 mV s−1, and 15 cycles. Benefiting a strong interfacial synergetic effect based on NiS/CR materials shows an excellent electrocatalytic activity for hydrogen evolution reaction (HER). Specifically, the NiS/CR electrode exhibits a high performance with low overpotential (70 mV for HER) and a slight Tafel slope (50 mV dec−1). Besides, annealing temperature helps increase the crystal properties, causing the appearance of NiS2 and Ni3S2 phases in NiS/CR@400 samples. Interestingly, the electrochemical surface area (ESCA) of the NiS/CR@400 sample significantly increased (17.3%) compared to the NiS/CR sample (5.8% of the total physical surface area) is due to the presence of NiS2 and Ni3S2, leading to NiS/CR@400 sample enhances the active sites by 16.0 mF cm−2. Furthermore, the long-term durability of NiS/CR@400 electrodes is good electrocatalytic over a continuous cycling 12-hour operation at 20 mA cm−2 in an alkaline environment. The NiS/CR is a promising electrode candidate for high HER performance, and here is a new design of electrocatalysts for water splitting.

Screening of transition metal dual-atom catalysts for hydrogen evolution reaction based on high-throughput calculation and searching surrogate prediction model using simple features

Dual-atom catalysts for hydrogen evolution reaction have received widespread attention, but precise screening and prediction of high-performance catalysts through simple methods remains a challenge. In this study, we perform high-throughput density functional theory (DFT) calculation and machine learning (ML) to screen and predict the transition metal dual-atom catalysts with N-doped graphene support (TMDACs) for acidic hydrogen evolution reaction (HER). The Fe_Zn and V_Fe DACs were proposed to be the most promising candidates for Pt-based catalyst toward acidic HER from 406 TMDACs, based on the characteristics of HER activity, formation, thermodynamic stability, abundance, environmental friendliness. The Fe_Zn and V_Fe DACs with excellent HER performance is due to the synergistic effect deriving from the interaction between H and dual metal atoms in TMDACs. By determining 6 different ML models with four kind of input features, we find the artificial neural networks (ANN) model can predict the HER performance of TMDACs most accurately only using simple input features, including one-hot-encoding of atomic number and Gibbs free energies of transition metal single-atom catalysts. This work not only proposed the potential TMDACs with high HER performance, but also verified that the ANN model can accurately predict the HER activity of diatomic catalysts with simple input features.

Atomically precise Pdm(SR)n nanoclusters for efficient hydrogen evolution reaction

Thiolate (SR) protected noble metal nanoclusters have grasped immense attention because of their promising applications in electrocatalysis, electrochemical sensors, photoluminescencse, supercapacitor and energy production. Among the noble metals, numerous reports have highlighted interesting results for Au25(SR)18, Au22(SR)18 and Ag44(SR)30 clusters but Pd and Pt nanoclusters are less addressed. Room temperature ionic liquids (RTIL) show enhanced electrocatalytic activity and stability as a binding matrix as compared to commercial binders like Nafion, Polyvinylidene fluoride (PVDF) and so on. Here, we have synthesised water-soluble thiolate 3-mercaptopropyl sulfonate (MPS) capped Palladium nanoclusters (Pd-MPS NCs). Further, Poly Acrylamide Gel Electrophoresis (PAGE), a separation technique was used to isolate size-dependent NCs and their electrocatalytic activity for the hydrogen evolution reaction (HER) with room temperature ionic liquid as a binding matrix was demonstrated. The electron microscope images of isolated Pd-MPS NCs from these three bands (obtained from PAGE separation) resulted with size ranges of 0.8-1.8 nm, 2-4 nm and 4.2-8 nm respectively. Among the three bands obtained from PAGE gel from the crude Pd NCs, the ultrasmall Pdm(SR)n NCs was isolated from the lower band resulted in high HER activity with less overpotential of 197 mV and a Tafel slope of 125.2 mV dec-1 as compared to Pd-MPS NCs obtained from the other two distinctive bands.

Direct Observation of Z-Scheme Route in Cu31 S16 /Znx Cd1-x S Heteronanoplates for Highly Efficient Photocatalytic Hydrogen Evolution.

Although photocatalytic hydrogen production from water holds great potential as a renewable and sustainable energy alternative, the practical application of the technology demands cost-effective, simple photocatalytic systems with high efficiency in hydrogen evolution reaction (HER). Herein, the synthesis and characterization of Cu31 S16 /Znx Cd1-x S heterostructured nanoplates (Cu31 S16 /ZnCdS HNPs) as a high photocatalytic system are reported. The cost-effective, hierarchical structures are easily prepared using the Cu31 S16 NPs as the seed by the epitaxial growth of the ZnCdS nanocrystals (NCs). The Cu31 S16 /ZnCdS without the noble metal cocatalyst exhibits a high HER rate of 61.7mmolg-1 h-1 , which is 8,014 and 17 times higher than that of Cu31 S16 and ZnCdS, respectively, under visible light irradiation. The apparent quantum yield (AQY) of Cu31 S16 /ZnCdS reaches 67.9% at 400nm with the highest value so far in the reported ZnCdS-based photocatalysts. The excellent activity and stability of the Cu31 S16 /ZnCdS are attributed to the formation of a strong internal electric field (IEF) and the Z-scheme pathway. The comprehensive experiments and theoretical calculations provide the direct evidences of the Z-scheme route. This work may offer a way for the design and development of efficient photocatalysts to achieve solar-to-chemical energy conversion at a practically useful level.

Design of bifunctional synergistic NiMoO4/g-C3N4 nanocomposite for the augmentation of electrochemical water splitting and photocatalytic antibiotic degradation performances

Developing cost-effective and efficient electrocatalysts across a wide pH range poses a significant challenge in electrochemical water splitting for energy generation. Designing nanocomposites with well-tuned interfaces can significantly boost electrocatalytic performance. Here, we present an effective and durable g-C3N4 (CN) modified NiMoO4 (NM) electrocatalysts coated on nickel foam (NF) for maximizing electrochemical water splitting performance. We optimized the nanocomposite for effective hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) activity in acidic, neutral, and alkaline electrolytes by adjusting the weight ratio of the g-C3N4. The NMCN-4/NF electrode exhibits the best electrochemical HER activity under alkaline and acidic conditions with lower overpotentials of −0.114 and −0.158 V, respectively, to achieve −10 mA cm−2. The highest HER activity was −127.3 mA cm−2 for the NMCN-4/NF under acidic conditions, which is 3.6 and 2.98 times greater than the pristine NM and CN-coated NF electrodes, respectively. Under an alkaline medium, the highest OER activity of the NMCN-4/NF was 152.9 mA cm−2, which is 4.07 and 2.75 folds higher than NM/NF and CN/NF electrodes, respectively. Besides, the NMCN-4 catalysts showed excellent photocatalytic degradation behavior on antibiotic pollutants with a percentage of 96.68%, which is 3.2 and 3.01% higher than pristine NM and CN catalysts, respectively. The NMCN-4 electro /photocatalysts exhibit an impressive balance of electro /photocatalytic efficiency and stability.

Electrocatalytic Hydrogen Evolution of Immobilized Copper Complex on Carbonaceous Materials: From Neutral Water to Seawater.

Electrochemical hydrogen evolution reaction (HER) is an appealing strategy to utilize renewable electricity to produce green H2 . Moreover, use of neutral-pH electrolyte such as water and seawater for the HER has long been desired for eco-friendly energy production that aligns with net zero emission goal. Herein, new heterogeneous catalysts were developed by dispersing an HER-active copper complex containing N4 -Schiff base macrocycle (CuL) on carbonaceous materials, i. e. multi-walled carbon nanotube (CNT) and graphene oxide (GO), via non-covalent interaction and investigated their HER performance. It was found that CuL/GO exhibited higher HER activity than CuL/CNT, possibly due to its significantly larger amount of CuL immobilized onto GO. In addition, CuL/GO showed satisfactory HER performance in a neutral (pH 7) NaCl electrolyte solution. Notably, the performances of CuL/GO were boosted up when performed in natural seawater sample with the faradaic efficiency of 70 % and 3 times higher amount of H2 at -0.6 V vs reversible hydrogen electrode (RHE), in comparison to the HER in a NaCl electrolyte. Furthermore, it possessed a low overpotential of 139 mV at -10 mA/cm2 . This demonstrated the potential use of CuL/GO as an effective HER catalyst in seawater for further sustainable development.

P-Ni co-doped Mo2C embedded in carbon-fiber paper as a highly efficient electrocatalyst for hydrogen evolution in alkaline media

The development of noble-metal-free electrocatalysts with high electrocatalytic performance and stability by adopting a scalable route is key to solving the energy crisis. We report a PNi co-doped Mo2C-based electrocatalyst with high hydrogen evolution reaction (HER) catalytic activity prepared by a molten-salt method. Using phosphating times of 2 h and 4 h yielded P-Ni-Mo2C-2h and P-Ni-Mo2C-4h, respectively, both of which exhibited nanoflower-like structures that provided abundant active sites for the reaction. P-Ni-Mo2C-2h possessed good electrocatalytic properties with a low overpotential of only 140.5 mV at j = 10 mA cm−2 and a small Tafel slope of 50.7 mV dec−1 in an alkaline environment. P-Ni-Mo2C-2h exhibited excellent stability after 20 h of continuous hydrogen production. The use of an excessively long phosphating time caused a narrow down of spaces formed by nanoflakes, thereby reducing the HER performance of the electrocatalyst. The results of this study provide guidelines for the preparation of high-efficiency PNi co-doped electrocatalysts.

Spin Polarization of 2D Weyl Semimetal Fe2Sn Enabling High Hydrogen Evolution Reaction Activity.

It is well known that magnetic field is one of the effective tools to improve the activity of hydrogen evolution reaction (HER), but considering the inconvenient application of an external magnetic field, it is essential to find a ferromagnetic material with high HER activity itself. Fortunately, recent study has shown that the two-dimmention (2D) Fe2Sn monolayer is a stable ferromagnetic topological Weyl semimetal material with high Tc of 433 K. Here, we report the Fe2Sn monolayer can be used as an alternative HER catalyst compared with expensive platinum (Pt). Our first-principles results show that the Gibbs free energy (ΔGH*) value of the spin polarized Fe2Sn monolayer is -0.06 eV, much better than that without considering spin polarization (-1.23 eV). Moreover, the kinetic analysis demonstrates that the HER occurs on the Fe2Sn monolayer according to the Volmer-Tafel mechanism with low energy barriers. Hence, our findings provide obvious evidence for spin-polarization-improved HER activity, paving a new way to design high-performance HER catalysts.

Microenvironment reconstitution of highly active Ni single atoms on oxygen-incorporated Mo2C for water splitting

The rational design of efficient bifunctional single-atom electrocatalysts for industrial water splitting and the comprehensive understanding of its complex catalytic mechanisms remain challenging. Here, we report a Ni single atoms supported on oxygen-incorporated Mo2C via Ni-O-Mo bridge bonds, that gives high oxygen evolution reaction (OER) and hydrogen evolution reaction (HER) bifunctional activity. By ex situ synchrotron X-ray absorption spectroscopy and electron microscopy, we found that after HER, the coordination number and bond lengths of Ni-O and Ni-Mo (Ni-O-Mo) were all altered, yet the Ni species still remain atomically dispersed. In contrast, after OER, the atomically dispersed Ni were agglomerated into very small clusters with new Ni-Ni (Ni-O-Ni) bonds appeared. Combining experimental results and DFT calculations, we infer the oxidation degree of Mo2C and the configuration of single-atom Ni are both vital for HER or OER. This study provides both a feasible strategy and model to rational design highly efficient electrocatalysts for water electrolysis.

Ultra-Low-Loaded Platinum Bonded Hexagonal Boron Nitride as Stable Electrocatalyst for Hydrogen Generation.

Chemical stability of hexagonal boron nitride (hBN) ultrathin layers in harsh electrolytes and the availability of nitrogen site in hBN to stabilize metals like Pt are used here to develop a high intrinsic activity hydrogen evolution reaction (HER) catalyst having low loaded Pt (5 weight% or <1 atomic%). A catalyst having a nonzero oxidation state for Pt (with a Pt-N bonding) is shown to be HER active even with low catalyst loadings (0.114 mgcm-2). Electronic modification of the shear exfoliated hBN sheets is achieved by Au nanoparticle-based surface decoration (hBN_Au), and further anchoring with Pt develops a catalyst (hBN_Au_Pt) with high turnover frequency for HER (∼15). The hBN_Au_Pt is shown to be a highly durable catalyst even after the accelerated durability test for 10000 cycles and temperature annealing at 100 °C. Density functional theory based calculations gave insights in to the electronic modifications of hBN with Au and the catalytic activity of the hBN_Au_Pt system, in line with the experimental studies, indicating the demonstration of a new class of catalyst system devoid of issues such as carbon corrosion and Pt leaching.

In Situ Active Site Refreshing of Electro‐Catalytic Materials for Ultra‐Durable Hydrogen Evolution at Elevated Current Density

AbstractEnhancing the durability of catalysts is of critical significance to industrialize green hydrogen production. Herein, a novel active site in situ refreshing strategy is proposed and demonstrated to fabricate highly active and ultra‐durable hydrogen evolution reaction (HER) electro‐catalytic material by HER activation. Briefly, a composite catalytic material is synthesized, which features Ni(PO3)2 active sites being embedded inside the amorphous Mo compound matrix (named NiMoO‐P). The Mo compound matrix undergoes gradual dissolution during HER followed by a dynamic equilibrium between the dissolution and deposition of the amorphous matrix. This process promotes the continuous exposure of insoluble Ni(PO3)2 and Ni2P partially converted from Ni (PO3) 2 in situ on the surface during HER activation. Thus, activated catalyst exhibits excellent HER performance featuring an extremely high current density of 1500 mA cm−2 at a rather low overpotential of 340 mV, and more attractively, an ultra‐long durability for hydrogen evolution for at least 1000 h at an industrial‐applicable current density of 900 mA cm−2. The mechanisms for the especially high HER performance are attributed to the exposure and continuous refreshing of Ni(PO3)2 and the in situ formed Ni2P during the HER process based on the DFT calculations and quasi‐in situ Raman spectroscopic monitoring.