High Electron Affinity Research Articles

Origin of two-dimensional hole gas at the hydrogen-terminated diamond surfaces: Negative interface valence-induced upward band bending

The surface transfer doping model has been extensively adopted as a mechanism to account for the generation of hole accumulation layers below hydrogen-terminated diamond (H-diamond) surfaces. To achieve effective surface transfer doping, surface electron acceptor materials with high electron affinity (EA) are required to produce a high density of two-dimensional hole gas (2DHG) on the H-diamond subsurface. We have established ingenious theoretical models to demonstrate that even if these solid materials do not have a high EA value, they remain capable of absorbing electrons from the H-diamond surface by forming a negatively charged interface to act as a surface electron acceptor in the surface transfer doping model. Our calculations, particularly for the local density of states, provide compelling evidence that the effect of an interface with negative charges induces an upward band bending on the H-diamond side. Furthermore, the valence band maximum of the diamond atoms at the interface crosses the Fermi level, giving rise to strong surface transfer p-type doping. These results give a strong theoretical interpretation of the origin of 2DHG on H-diamond surfaces. The proposed guidelines contribute to further improvements in the performance of 2DHG H-diamond field effect transistors.

Insights on molecular modeling and supramolecular arrangement of bilastine polymorphs.

The advancement in the development of second-generation drugs in the field of antihistamines represents a significant milestone in the management of allergic diseases, targeting the effects of histamine. The efficacy of bilastine in treating allergic disorders has sparked interest in investigating its polymorphism, a crucial property that impacts quality, safety, and effectiveness as per regulatory guidelines. This study examines the polymorphism of bilastine, focusing on two crystalline forms labeled as Form I and Form II. Utilizing advanced analytical techniques, the research explores the structural characteristics and molecular interactions within these forms. Geometric parameters, such as bond lengths, bond angles, and torsion angles, are examined to comprehend molecular conformations and crystal packing arrangements. Hydrogen bonding, covalent bonds, and van der Waals forces contribute to the unique supramolecular arrangements in these forms.This study provides a significant contribution to understanding bilastine's polymorphism, offering critical insights to researchers and regulatory bodies to ensure the quality, efficacy, and safety of antihistamine products. The molecular conformation of two bilastine forms was obtained through DFT with the exchange-correlation functional M06-2X and the 6-311 + + G(d,p) basis set, and the results were compared with the experimental X-ray. The atomic coordinates were obtained directly from the crystalline structures, and charge transfer was also investigated using frontier molecular orbitals (HOMO and LUMO), and MEP map in order to evaluate the energies associated with charge transfers and regions of high electron affinity. The geometric and topological parameters and intermolecular interactions in the crystals were analyzed using Hirshfeld Surface.

Constructing a dual gradient structure of energy level gradient and concentration gradient to significantly improve the high-temperature energy storage performance of all organic composite dielectrics†

The severe electrical conduction loss at elevated temperature is the initial factor for the degradation of energy storage performance of polymer dielectric films, thus it urgently needs to develop highly heat-resistant polymer capacitive films for meeting the advancing electrical and electronic applications. For reducing conduction loss and improving the high-temperature energy storage performance of dielectrics, the current approaches are focusing on preventing carriers mobility at elevated temperature and high electric field. In this study, the molecular semiconductor ITIC (ITIC is an organic molecular semiconductor 2,2′-[[6,6,12,12-Tetrakis(4-hexylphenyl)-6,12-dihydrodithieno[2,3-d:2′,3′-d′]-s-indaceno[1,2-b:5,6-b′]dithiophene-2,8-diyl]bis [methylidyne(3-oxo-1H-indene-2,1(3H)-diylidene)]]bis[propanedinitrile] abbreviation) with high electron affinity was filled into the blends of polyether imide (PEI) and polyethersulfone (PESU). The energy level gradient was constructed due to the different energy bandgap structures among ITIC, PESU and PEI. In addition, the concentration structure gradient was constructed due to the concentration of ITIC which varies along the thickness direction. The results demonstrate that the dual gradients of energy level and concentration can effectively inhibit carrier migration and lower conduction loss, thus significantly improving the electric breakdown strength and energy storage performance at high temperature. The energy storage densities (Ue) of 5.14 J/cm3 and 3.6 J/cm3 at 150 °C and 200 °C, respectively were achieved in PEI/PESU blends with 9 layers of ITIC gradient and 0.25 % ITIC in the outer layer. This study puts forward a novel structural design combining the energy levels gradient with concentration gradient to optimise the high-temperature energy storage properties of all-organic dielectric films.

Design Principles of Diketopyrrolopyrrole‐Thienopyrrolodione Acceptor1–Acceptor2 Copolymers

AbstractThe design principles of acceptor1–acceptor2 copolymers featuring alternating diketopyrrolopyrrole (DPP) and thienopyrrolodione (TPD) moieties are investigated. The investigated series of polymers is obtained by varying the aromatic linker between the two acceptor motifs between thiophene, thiazole, pyridine, and benzene. High electron affinities between 3.96 and 4.42 eV, facilitated by the synergy of the acceptor motifs are determined with optical gaps between 1.37 and 2.02 eV. Grazing incidence wide‐angle X‐ray scattering studies reveal a range of film morphologies after thermal annealing, including face‐on, end‐on and superstructure edge‐on‐like crystallites. Conversely, all materials form thin edge‐on layers on the polymer–air interface, as demonstrated by multi‐elemental near‐edge X‐ray absorption fine‐structure spectroscopy. The benefit of the electron‐deficient linkers thiazole and pyridine is evident: In organic field effect transistors, electron mobilities of up to 4.6 × 10−2 cm2 V−1 s−1 are obtained with outstanding on/off current ratios of 5 × 105, facilitated by the absence of detectable hole transport in these materials. Viability for all‐polymer solar cells is assessed in active layer blends with the donor polymer PM6, yielding a maximum average power conversion efficiency of 4.8% and an open circuit voltage above 1 V.

The design and preparation of NDI modified MOFs for high efficiency removal of MB and Cr(VI)

The naphthalene tetracarboxdiimide (NDI) modified NH2-UiO-66(Zr) and NH2-MIL-101(Cr) (NDI/UZr and NDI/MCr for short) metal organic frameworks (MOFs) materials with strong covalent bond OC–N–CO were designed and prepared by solvothermal method. The comprehensive physical and chemical properties of the materials were characterized, and the adsorption and photocatalytic properties of the materials were evaluated by using methylene blue (MB) and Cr(VI) in single and mixture system. When the initial concentration of MB was 50 mg·L−1, the photocatalytic degradation rate constant of NDI/MCr(2:1) was 10.3 and 13.8 times higher than that of NH2-MIL-101(Cr) and NDI/UZr(2:1), respectively. Additionally, NDI/MCr(2:1) exhibited 1.6 times higher reaction rate constant than that of NDI/UZr(2:1) for the removal of 10 mg∙L−1 Cr(VI). The enhanced adsorption and photocatalytic ability over NDI/MOFs were attributed to the MOFs larger specific surface area and wider spectral response, and NDI showed high electron affinity, superior charge carrier transport properties. Free radical and electron capture experiments indicated that h+, •O2−, and e− were the main active species in the NDI/MOFs system. Among them h+ and •O2− played an essential role in the removal of MB, while e− and •O2− contributed to the photocatalytic reduction of Cr(VI). The mechanism of the photocatalytic process was discussed in detail.

Designing Thiadiazoloquinoxaline-Based Conjugated Polymers for Efficient Organic Photovoltaics: A DFT/TDDFT Study.

Clean and renewable energy development is becoming frontier research for future energy resources, as renewable energy offers sustainable and environmentally friendly alternatives to non-renewable sources such as fossil fuels. Among various renewable energy sources, tremendous progress has been made in converting solar energy to electric energy by developing efficient organic photovoltaics. Organic photovoltaic materials comprising conjugated polymers (CP) with narrow optical energy gaps are promising candidates for developing sustainable sources due to their potentially lower manufacturing costs. Organic semiconductor materials with a high electron affinity are required for many optoelectronic applications. We have designed a series of organic semiconductors comprised of cyclopentadithiophene as a donor and thiadiazoloquinoxaline (TQ) as an acceptor, varying the π-conjugation and TQ-derivatives. We have employed density functional theory (DFT) and time-dependent DFT (TDDFT) to evaluate the designed CP's optoelectronic properties, such as optical energy gap, dipole moment, and absorption spectra. Our DFT/TDDFT result shows that the energy gap of CPs is lowered and redshifted in the absorption spectra if there is no insertion of conjugation units such as thiophene and selenophene between donor and acceptor. In addition, selenophene shows relatively better redshift behavior compared to thiophene. Our work also provides rational insight into designing donor/acceptor-based CPs for organic solar cells.

Electric-Tree Resistant Performance and Thermal Charge-Carrier Dissipation Mechanism of Voltage Stabilizer-Modified EPDM

In order to improve electric-tree resistant performance and dielectric breakdown strength of ethylene-propylene-diene misch-polymere (EPDM) material used for cable accessory reinforce insulation, the two specific aromatic ketone compounds—vinylphenylacetone (VPE) and 4-propylene oxyxy-2-hydroxydibenzenone (AOHBP) are employed as two paradigms of voltage stabilizer for chemical-graft modifications. Electric-tree resistances and insulation performances of modified EPDM materials and their charge trapping mechanism of thermoelectron inhibitions are studied by the accelerated electric-tree aging experiments, alternating current (AC) dielectric breakdown tests, surface potential trap-level analyses and first-principles calculations. Both the two species of voltage stabilizers are effective for promoting electric-tree inception voltage and dielectric breakdown strength, leading to a high extension of electric-tree morphology and smaller dimension of electric-trees growth, in which AOHBP is more significant. The two species of voltage stabilizers have been successfully grafted onto EPDM molecular-chains in thermal-chemistry crosslinking reactions of EPDM, introducing multiple shallow levels of charge traps, which reduces the energy released by trapping charge carriers and thus alleviates electric-tree aging of EPDM. The AOHBP and VPE represent a high electron affinity and a small electronic energy gap, which is competent of assimilating the kinetic energies of hot charge carriers whilst restricting Auger electronic excitation. Especially, the benzene group in voltage stabilizer renders shallow level charge traps with a larger carrier capture cross-section than deep traps and simultaneously possesses the high atomic vibration frequencies similar as electronic-transition energies, which results in effective dissipation on the kinetic energies of hot charge carriers. This mechanism dominates to increase electric-tree resistance and insulation strength of EPDM. The present study proves the important role of voltage stabilizers in improving insulation performance of EPDM material, and reveals the refrigeration mechanism on hot charge carriers for restricting electric-tree growth, which provides a significant strategy of chemical modifications for developing high-insulation cable accessory materials.

Chemical library generation of polymer acceptors for organic solar cells with higher electron affinity

In this study, an intricate machine learning assisted framework is introduced for the designing of polymer acceptors. Machine learning (ML) models are trained to predict the electron affinity of polymers. Ten thousand new polymers are generated using the Breaking Retrosynthetically Interesting Chemical Substructures (BRICS) method and their electron affinity values are predicted using a pre-trained ML model. The selection of polymers is based on electron affinity, retaining those with higher electron affinity. The synthetic accessibility of the selected polymers is evaluated. Additionally, the structural similarity among the selected polymers is examined; results are indicating higher similarity between selected compounds. By efficiently identifying and optimizing new polymers, the approaches developed significantly enhance the likelihood of discovering superior materials for advanced applications.

Rapidly Grown Hexagonal Organic Microtubes Using Ionic Liquids for an Enhanced Optical Waveguide Effect

AbstractAn optical waveguide that transmits the electromagnetic waves is a critical component for various optoelectrical applications including integrated optical circuits and optical communications. Among many, the 1D tubular optical waveguide structure enables efficient distant energy transfer via mode selection within the optical microcavity. However, its application is limited due to the complicated fabrication process. Herein, hexagonal tris(8‐hydroxyquinoline) aluminum (Alq3) microtubes with an average longitudinal length of ≈15 µm are self‐assembled within few minutes by utilizing 1‐butyl‐3‐methylimidazolium tetrafluoroborate (BMIMBF4) ionic liquids. The swift fabrication is enabled by the high electron affinity of BMIMBF4 that forms hexagonal microrods. Also, BMIMBF4 ionic liquid etches the central region of micorods during its growth, forming microtubes with a wall thickness of ≈650 nm. The fabricated Alq3 microtubes show significantly improved waveguide characteristics with reduced optical loss coefficient (0.054 µm−1) compared to that of microrods (0.271 µm−1). The demonstrated method to fabricate Alq3 microtubes with ionic liquid is an efficient approach to utilize organic microstructures as an optoelectrical components for advanced optical communications.

Bis(benzoselenadiazol)ethane: A π-Extended Acceptor-Dimeric Unit for Ambipolar Polymer Transistors with Hole and Electron Mobilities Exceeding 10 cm2 V-1 s-1.

The lack of ambipolar polymers with balanced hole (μh) and electron mobilities (μe) >10 cm2 V-1 s-1 is the main bottleneck for developing organic integrated circuits. Herein, we show the design and synthesis of a π-extended selenium-containing acceptor-dimeric unit, namely benzo[c][1,2,5]selenadiazol-4-yl)ethane (BBSeE), to address this dilemma. In comparison to its sulfur-counterpart, BBSeE demonstrates enlarged co-planarity, selective noncovalent interactions, polarized Se-N bond, and higher electron affinity. The successful stannylation of BBSeE offers a great opportunity to access acceptor-acceptor copolymer pN-BBSeE, which shows a narrower band gap, lower-lying lowest unoccupied molecular orbital level (-4.05 eV), and a higher degree of backbone planarity. Consequently, the pN-BBSeE-based organic transistors display an ideally balanced ambipolar transporting property with μh and μe of 10.65 and 10.72 cm2 V-1 s-1, respectively. To the best of our knowledge, the simultaneous μh/μe values >10.0 cm2 V-1 s-1 are the best performances ever reported for ambipolar polymers. In addition, pN-BBSeE shows an excellent shelf-storage stability, retaining over 85 % of the initial mobility values after two months storage. Our study demonstrates the π-extended acceptor-dimeric BBSeE is a promising acceptor building block for constructing high-performance ambipolar polymers applied in next-generation organic integrated circuit.

Selective Phosphate Adsorption Using Topologically Regulated Binary-Defect Metal-Organic Frameworks: Essential Role of Interfacial Electron Mobility.

Metal-organic framework (MOF)-modified biochars (BC) have gained recognition as potent adsorbents for phosphate. However, essential insights into the electronic interfacial state of the MOFs remain lacking. In this study, we propose a novel topological transformation strategy to directionally regulate the interfacial electronic states of BC/MOFs composites. The optimized BC/MOFs exhibited an excellent selective phosphate adsorption capacity of 188.68 mg·g-1, coupled with rapid sorption kinetics of 6.81 mg·(g·min0.5)-1 in simulated P-laden wastewater. When challenged with real bioeffluent, such efficacy was still maintained (5 mg·L-1, 25.92 mg·g-1). This superior performance was due to the Fe(III) → Fe(II) transition, promoting electron mobility and leading to the anchoring of Mg(II) to form specific coordination unsaturated sites (Mg-CUS) for phosphate adsorption. Importantly, the simultaneous regulation of binary defects further enhances electron mobility, resulting in the formation of sp3 unequal hybrid orbitals with a stronger internal coupling capability between Mg 3s in Mg-CUS and O 2p in phosphate. Furthermore, the high electron affinity of Mg effectively promotes electron cycling, endowing BC/MOFs with a distinct self-healing capability to facilitate phosphate desorption. The outcomes of this study provide novel perspectives for electronic regulated phosphate adsorption.

Tetrahexahedral binary transition metal compound sub-nanoclusters

We explore new transition metal (TM) compound sub-nanoclusters, TM8X6 (TM = Mn, Fe, Co and X = P, B, As), using density functional theory. Their optimized geometric structures show the same polyhedral structure (tetrahexahedron) independent of a kind of TM and metalloid (X), where eight TM atoms form a cubic structure capped with six metalloid (X) atoms. Incorporating an extra TM atom into the TM cubic results in an endohedral structure, TM9X6. Encapsulation of an additional TM atom merely changes the binding energy except for the Co boride cluster. The binding energy of Co8B6 increases by incorporating an additional Co atom, in which it is observed that the electron density is accumulated between B and all Co atoms (Co atoms both at the center and at the edges), but in other clusters, the electron excess is found mainly between TM atoms. The MnnP6 (n = 8 and 9) clusters have a high adiabatic electron affinity (>6 eV) due to the relatively large difference in electronegativity between Mn and P. The highest occupied molecular orbital and lowest unoccupied molecular orbital gaps of all clusters lie in the visible range. The interaction between nanoclusters and graphene with a single vacancy is studied as a function of the different cluster landing site on the graphene, where the geometric structure change of the clusters strongly depends on the adsorption site.

γ-Ray Irradiation Significantly Enhances Capacitive Energy Storage Performance of Polymer Dielectric Films.

Polymer dielectric capacitors are fundamental in advanced electronics and power grids but suffer from low energy density, hindering miniaturization of compact electrical systems. It is shown that high-energy and strong penetrating γ-irradiation significantly enhances capacitive energy storage performance of polymer dielectrics. γ-irradiated biaxially oriented polypropylene (BOPP) films exhibit an extraordinarily high energy density of 10.4 J cm-3 at 968 MV m-1 with an efficiency of 97.3%. In particular, an energy density of 4.06 J cm-3 with an ultrahigh efficiency of 98% is reliably maintained through 20000 charge-discharge cycles under 600 MV m-1. At 125°C, the γ-irradiated BOPP film still delivers a high discharged energy density of 5.88 J cm-3 with an efficiency of 90% at 770 MV m-1. Substantial improvements are also achieved for γ-irradiated cycloolefin copolymers at a high temperature of 150°C, verifying the strategy generalizability. Experimental and theoretical analyses reveal that the excellent performance should be related to the γ-irradiation induced polar functional groups with high electron affinity in the molecular chain, which offer deep energy traps to impede charge transport. This work provides a simple and generally applicable strategy for developing high-performance polymer dielectrics.

A Theoretical Investigation on the Properties of Charge Transport of Hexaazatrinaphthylene Derivatives

AbstractA hexaazatrinaphthylene [HAT] is a well‐known halogenated perylene diimide compound recognized for photochemical stability, high electron affinity, easy functionalization, and high conductivity. Based on density functional theory, optoelectronic and charge transport properties of HAT derivatives with electron‐donating, electron‐withdrawing, and push‐pull substituents, were investigated. The impact of substituting electron‐withdrawing groups (EWG), electron‐donating groups (EDG), and push‐pull substituents on various aspects, including molecular structure, frontier molecular orbitals, ionization energy, electron affinity, reorganization energy, crystal packing, and charge carrier mobility, is investigated. A crystal structure simulation method is employed to optimize potential arrangements of crystal packing for the molecules under examination. The presence of EWG, EDG, and push‐pull substitutions significantly affects the energy and distribution of electron density in the frontier molecular orbitals, leading to alterations in the absorption spectrum and charge transport properties. When adding various substituents to the core system, the different crystal packing motifs and varied intermolecular interactions of the examined molecules result in noticeably different transfer integrals. Due to higher hole reorganization energy and weak HOMO orbital overlapping, HAT derivative molecules exhibit better electron mobility. Among the studied molecules, HAT‐F and HAT‐F‐OCH3 molecules demonstrate better electron mobility with values of 0.49 and 2.36 cm2 V−1 s−1, respectively, and established the n‐channel characteristics.

Benzobisthiadiazole-Based Small Molecular Near-Infrared-II Fluorophores: From Molecular Engineering to Nanophototheranostics.

Organic fluorescent molecules with emission in the second near-infrared (NIR-II) biological window have aroused increasing investigation in cancer phototheranostics. Among these studies, Benzobisthiadiazole (BBT), with high electron affinity, is widely utilized as the electron acceptor in constructing donor-acceptor-donor (D-A-D) structured fluorophores with intensive near-infrared (NIR) absorption and NIR-II fluorescence. Until now, numerous BBT-based NIR-II dyes have been employed in tumor phototheranostics due to their exceptional structure tunability, biocompatibility, and photophysical properties. This review systematically overviews the research progress of BBT-based small molecular NIR-II dyes and focuses on molecule design and bioapplications. First, the molecular engineering strategies to fine-tune the photophysical properties in constructing the high-performance BBT-based NIR-II fluorophores are discussed in detail. Then, their biological applications in optical imaging and phototherapy are highlighted. Finally, the current challenges and future prospects of BBT-based NIR-II fluorescent dyes are also summarized. This review is believed to significantly promote the further progress of BBT-derived NIR-II fluorophores for cancer phototheranostics.

Enhancing energy storage performance of PVDF-based composites through semiconducting AZO-BT heterostructure

Commercially available flexible dielectric capacitors with high energy density (Ud) still present a significant challenge due to the inherent trade-off between breakdown strength (Eb) and dielectric constant (εr). In this context, a novel strategy is proposed to synchronously improve the Eb and εr of PVDF-based polymer capacitors by incorporating AZO-BT heterostructure nanoparticles, forming AZO-BT/PVDF composite films. Initially, the tightly polarized AZO affixed to the surface of BT particles create a localized electric field that enhances and sustains the polarization intensity of BT. Additionally, the heterojunction electric field generated inhibits the migration of the injected electron. Furthermore, the semiconducting AZO with high electron affinity effectively captures and traps the injected and excited electrons. Notably, the existed oxygen vacancies in AZO significantly enhances Eb and polarization reverse. Consequently, the AZO-BT/PVDF composite film achieves the highest Ud of 9.10 J·cm−3 at 460 MV·m−1. The innovative approach of constructing a semiconducting-ferroelectric heterostructure offers a promising avenue for designing and fabricating high energy density polymer capacitors.

Interfacial Engineering Using Covalent Organic Frameworks in Polymer Composites for High‐Temperature Electrostatic Energy Storage

AbstractThe use of inorganic nanofillers has been an effective method to improve high‐temperature capacitive performance of dielectric polymers, though there are unmet challenges such as undesirable organic–inorganic compatibility, and low efficiencies and energy densities. Herein, a surface functionalization strategy using covalent organic frameworks (COFs) is employed to address such challenges in realizing high‐performing polymer composites. Specifically, core–shell structured nanoparticles, where ZrO2 nanoparticles act as the core and a COF material forms the shell, are constructed and composited with the polyetherimide (PEI) matrix. The design leverages the high electron affinity (EA) of the outer COF shell to create energy traps, thereby capturing free charges and limiting electrical conduction. Concurrently, the low EA and wide bandgap of the ZrO2 core introduce energy barriers to impede charge injection and migration. This orchestrated “energy level cascade” results in a marked reduction of leakage current and energy loss. The resulting polymer composite showcases an impressive discharged energy density of 6.21 J cm−3 at an efficiency above 90%, with a maximum discharged energy density reaching 7.43 J cm−3 at 150 °C. These performance metrics position the PEI/ZrO2@COF polymer composite to surpass or be on par with state‐of‐the‐art high‐temperature PEI composites and other advanced polymer dielectrics.

Theoretical investigations on electronic structure and optoelectronic properties of vinyl fused monomeric and oligomeric benzimidazole derivatives using DFT and TDDFT techniques.

The present work encompasses the theoretical investigation of 14 benzimidazole-based (seven vinyl fused monomeric benzimidazole (VFMBI) and seven vinyl fused oligomeric benzimidazole (VFOBI)) derivatives using density functional theory (DFT) and time-dependent density functional theory (TD-DFT) techniques. The effects of electron donor and acceptor groups on the electronic structure such as HOMO (highest occupied molecular orbital) and LUMO (lowest unoccupied molecular orbital) energies, HOMO-LUMO energy gap, ionization potentials (IPs), electron affinities (EAs), internal reorganization energies of holes and electrons (λh/e), and excited state properties have been explored in the present work. In addition, natural bond orbital (NBO) analysis of these compounds has been investigated to reveal the typical stabilization interactions in these molecules. Hence, the aim of the present work is to explore the electronic structures and optoelectronic properties of the title molecules on the basis of the DFT quantum chemical calculations and to make an idea on the parameters influencing the optoelectronic efficiency toward a better understanding of the structure-property relationships. Moreover, the calculated results reveal the suitable optoelectronic properties of benzimidazole oligomer derivatives using theoretical techniques. Of the investigated molecules, 4_MABIMCY and 4_MABIOCY show potential optoelectronic properties and can be used as a potential charge transport material due to their narrow band gap, high hyperpolarizability, low ionization potential, and high electron affinity. The larger λab and λem values favor the system to be used as a potential optoelectronic material with better optical properties. All quantum chemical calculations were carried out using Gaussian09 theoretical chemistry code. Ground state calculations were made using the B3LYP/6-31+G(d,p) method. All excited state calculations had been computed using TDB3P86/6-311++(d,p). The initial structure for excited state calculations was optimized using the AM1 semi-empirical method.

Electron superhalogens as positronium superhalogens.

Positronium (Ps) exhibits the ability to form energetically stable complexes with atoms and molecules before annihilation occurs. In particular, F, a halogen, shows the highest reported positronium binding energy (2.95 eV) in the periodic table. Superhalogens are defined as molecules with electron affinities exceeding that of Cl (3.61 eV), the atom with the highest electron affinity. Building upon the concept of superhalogens, we can define Ps-superhalogens as molecules with Ps binding energies surpassing that of F. This study explores structural and energetic aspects of positronium and positron binding to neutral and anionic superhalogen molecules of the MXk+1 family (M = Li, Na, Be, Mg, B, Al, Si, P; X = F, Cl, Br), respectively and where k represents the highest formal valence of M. We perform multicomponent MP2 calculations for positron systems, which reveal how positron affinities vary with the type and number of halogen atoms present. The analysis of the results emphasizes the predominant role of electrostatic interactions in determining the positron affinity, with negligible effects of electronic and geometric relaxation upon positron attachment. We predict the energetic stability of 22 of the 24 PsMXk+1 complexes with respect to the chemically relevant dissociation channels: e+ emission, Ps emission and M-X bond breaking. Our findings reveal six MFk+1 systems that qualify as Ps-superhalogens, showing a positronium binding energy exceeding 2.95 eV. Of these, AlF4 stands out by setting a new record for the highest positronium binding energy among neutral molecules, reaching 4.36 eV.

Ca n neutral clusters: a two-step G 0 W 0 and DFT benchmark.

Electronic and structural properties of calcium clusters with a varying size range of 2-20 atoms are studied using a two-step scheme within the GW and density functional theory (DFT) with generalized gradient approximation (GGA). The GGA overestimates the binding energies, optimized geometries, electron affinities, and ionization potentials reported in the benchmark. The ground-state structure geometry and binding energy were obtained from the DFT for the ground-state structure of each cluster. The binding energy of the neutral clusters of the calcium series follows an increasing trend, except for a few stable even and odd clusters. The electronic properties of the calcium cluster were studied with an all-electron FHI-aims code. In the G 0 W 0 calculation, the magic cluster Ca10 has relatively high ionization potential and low electron affinity. The obtained ionization potentials from the G 0 W 0 @PBE calculation showed that the larger cluster has less variation, whereas the electron affinities of the series have an increasing trend. The ionization potentials from the G 0 W 0 benchmark for the calcium cluster series have not yet been described in the literature.