High X-ray Dose Research Articles

Preparation for targeted sterile insect technique to control invasive Aedes aegypti (Diptera: Culicidae) in southern California: dose-dependent response, survivorship, and competitiveness.

Aedes aegypti is fast spreading across California, with over 300 cities within 22 central and southern counties being infested since its introduction in 2013. Due to its cryptic breeding habitats, control efforts have not been successful so far. This calls for innovative tools such as sterile insect technique (SIT) to reinforce the existing integrated pest management (IPM). Here, we assessed fitness, survivorship, and dose response of X-ray irradiated male Ae. aegypti in California. Locally acquired Ae. aegypti eggs were hatched and reared in temperature-controlled laboratory setting at the West Valley Mosquito and Vector Control District in Ontario, California. Freshly emerged adult male mosquitoes were manually separated using motor-operated aspirators and treated with X-ray radiation at different dosage (42-60 Gy). Dose response of irradiated males was analyzed and induced sterility determined. Survivorship of males treated with different X-ray doses was compared. Fecundity of females that mated with irradiated males at different X-ray doses was generally comparable. Overall, induced sterility increased with higher X-ray doses. Nulliparous females that mated with male Ae. aegypti treated with 55-60 Gy laid eggs with over 99% sterility. Non-irradiated male mosquitoes had higher survivorship (mean = 0.78; P = 0.0331) than irradiated mosquitoes (mean range = 0.50-0.65). The competitiveness index of irradiated males decreased with increasing X-ray treatment doses, 1.14 at 55 Gy and 0.49 at 60 Gy, and this difference was significant (P < 0.01). Irradiated males showed high survivorship and competitiveness-key for the anticipated SIT application for the control of invasive Ae. aegypti in California.

Application of FISH based G2-PCC assay for the cytogenetic assessment of high radiation dose exposures: Potential implications for rapid triage biodosimetry.

The main goal of this study is to test the utility of calyculin A induced G2-PCC assay as a biodosimetry triage tool for assessing a wide range of low and acute high radiation dose exposures of photons. Towards this initiative, chromosome aberrations induced by low and high doses of x-rays were evaluated and characterized in G2-prematurely condensed chromosomes (G2-PCCs) by fluorescence in situ hybridization (FISH) using human centromere and telomere specific PNA (peptide nucleic acid) probes. A dose dependent increase in the frequency of dicentric chromosomes was observed in the G2-PCCs up to 20 Gy of x-rays. The combined yields of dicentrics and rings in the G2-PCCs showed a clear dose dependency up to 20 Gy from 0.02/cell for 0.1 Gy to 14.98/cell for 20 Gy. Centric rings were observed more frequently than acentric ring chromosomes in the G2-PCCs at all the radiation doses from 1 Gy to 20 Gy. A head-to-head comparison was also performed by FISH on the yields of chromosome aberrations induced by different doses of x-rays (0 Gy -7.5 Gy) in colcemid arrested metaphase chromosomes and calyculin A induced G2-PCCs. In general, the frequencies of dicentrics, rings and acentric fragments were slightly higher in G2-PCCs than in colcemid arrested metaphase chromosomes at all the radiation doses, but the differences were not statistically significant. To reduce the turnaround time for absorbed radiation dose estimation, attempt was made to obtain G2-PCCs by reducing the culture time to 36 hrs. The absorbed doses estimated in x-rays irradiated (0,1,2 and 4 Gy) G2-PCCs after 36 hrs of culture were grossly like that of G2-PCCs and colcemid arrested metaphase chromosomes prepared after 48 hrs of culture. Our study indicates that the shortened version of calyculin A induced G2-PCC assay coupled with the FISH staining technique can serve as an effective triage biodosimetry tool for large-scale radiological/nuclear incidents.

Residual encoder-decoder based architecture for medical image denoising

AbstractHigh-resolution computed tomography (CT) scans require high doses of X-rays, posing potential health risks to patients, including genetic damage and cancer. Conversely, low doses of X-rays result in noise and artifacts in the reconstructed CT scans. Consequently, the problem of denoising low-dose CT (LDCT) images has become a critical yet challenging issue in the field of CT imaging. However, existing deep learning-based LDCT image denoising methods frequently result in the loss of high-frequency features, such as edges and textures, due to the use of mean squared error loss. To address this issue, we propose a method based on high-frequency feature learning to enhance the denoising performance of existing models. Our method is designed to simultaneously learn the primary task of LDCT image denoising and the auxiliary task of LDCT edge detection, thereby improving the denoising performance without increasing the number of model parameters and the inference time. Our method significantly improves the denoising performance of the RED-CNN model, achieving competitive results compared to state-of-the-art denoising models on the AAPM and Qin-LUNG-CT datasets.

Hard X-ray nanoprobe to study the emission properties of Ce-doped YAG wafer by using XEOL and TR-XEOL

In this study, the valent state, emission properties, and decay lifetime of Ce-doped yttrium aluminum garnet (Y3Al5O12, YAG) wafer have been probed using X-ray absorption (XAS), X-ray excited optical luminescence (XEOL), and time-resolved XEOL (TR-XEOL). The XAS spectrum demonstrates that Ce ions are in the trivalent state, and the XEOL spectrum exhibits typical 5 d1-4f1(2F5/2) and 5 d1-4f1(2F7/2) transitions of Ce3+ ions, with emission peaks at ∼528 nm and 582 nm, respectively. From the TR-XEOL measurements, the decay lifetimes of 5 d1-4f1(2F5/2) and 5 d1-4f1(2F7/2) transitions are about ∼90 ns and ∼100 ns, respectively. We found that the reabsorption effects will not only make the 5 d1-4f1(2F7/2) transitions have longer decay lifetime, but also the higher emission intensity. By comparison with photoluminescence (PL) and time-resolved PL using a pulsed laser at 375 nm, we found that the emission spectra and decay lifetime of Ce-doped YAG (111) wafer are different when using X-ray irradiation. The longer decay lifetime measured by TR-XEOL compared TR-PL are caused by high X-ray dose irradiation. In addition, high X-ray doses provided by the nano-focus X-ray beam will be influenced the emission behaviors of Ce-doped YAG (111) wafer. Which phenomena have been demonstrated by using time-dependent XEOL with irradiation for 10 h. These peculiar emission behaviors observed with a hard X-ray nanoprobe may be able to provide important information on quantum technologies and scintillators used in hard X-ray detectors.

Connexin 43 regulates pyroptosis by influencing intracellular calcium levels in X-ray induced vascular endothelial cell damage.

Our prior research has established that X-ray exposure induces pyroptosis in human umbilical vein endothelial cells (HUVECs), with Cx43 playing a regulatory role in this process. However, the precise mechanism by which Cx43 regulates pyroptosis remains unclear. The objective of this study is to assess the involvement of the calcium signaling pathway in Cx43-mediated regulation of X-ray-induced pyroptosis in HUVECs. HUVECs were exposed to 10 Gy X-ray radiation either alone or combined with Cx43 overexpression or knockdown. Calcium ions (Ca2+) were stained using Fluo-4/AM and analyzed via flow cytometry and confocal microscopy. Pyroptosis was assessed through flow cytometry by staining with FLICA (fluorescent-labeled inhibitor of caspase) and propidium iodide (PI). Calcium signaling was inhibited using BAPTA/AM, 2-APB, or nifedipine. Protein expression levels were assessed by western blotting. X-ray irradiation induced an increase in intracellular calcium levels in HUVECs in a dose- and time-dependent manner. The results demonstrated that regulating calcium release with BAPTA/AM, 2-APB, or nifedipine significantly reduced pyroptosis. Also, the overexpression of Cx43 significantly attenuated the increase in intracellular calcium. Conversely, Cx43 knockdown via siRNA significantly increased the intracellular calcium levels. Also, interfering with calcium signaling using BAPTA/AM, 2-APB, or nifedipine reduced the raised pyroptosis levels induced by Cx43 knockdown. Individual HUVECs exposed to high-dose X-ray irradiation exhibited an increase in intracellular calcium, leading to pyroptosis. Also, upregulating Cx43 expression reduced the pyroptosis levels by inhibiting intracellular calcium concentration. This study introduces new concepts for identifying targets for the prophylaxis and therapy of radiation-induced damage.

Online and offline Radiation-Induced Attenuation measurements on FD-7 radiophotoluminescence dosimeters irradiated at high X-ray doses

Radiophotoluminescence (RPL) FD-7 glass dosimeters find applications in low to high dose radiation environments. This work presents an experimental characterization of RPL glass dosimeter, irradiated with 100 kV X-ray tubes at room temperature at doses ranging from 1.3 kGy to 0.47 MGy, much higher of their common use range. In this study, a customized set-up has been developed, allowing the online investigation of the glass transmission changes with radiation, known as Radiation-Induced Attenuation (RIA), as well as the recovery and post-mortem characterizations up to 2 months after irradiation. Multi-wavelength analysis was performed, focusing on the range between 200 nm and 800 nm. At 700 nm and 800 nm, RIA increases progressively with dose up to about 5 kGy, and tends to approach saturation (2–3 dB/mm) for doses higher than 50 kGy. Higher attenuation is reported at lower wavelengths: 445-nm light transmission reduces to only about 1% of its initial value after 2 kGy. RIA recovery after irradiation was observed, up to 6% at 700 nm wavelength within 3 h from the irradiation conclusion and up to 26% 2 months after, especially at doses in the kGy range. Both online RIA and its recovery are highly dependent on the selected wavelength and on the total absorbed dose. This information is crucial for the extension of the use of these dosimeters up to high doses, complementary to the RPL signal, traditionally used alone for the determination of doses up to the Gy range.

Curva de calibración dosis-efecto para altas dosis de rayos X utilizando el ensayo de condensación prematura de cromosomas con Caliculina-A

Purpose: This article shows the results of the Cytogenetics Laboratory of the Health Research Institute (INISA) to develop a dose-effect calibration curve with the Calyculin-A chemical induction premature condensation assay to estimate high doses of X-ray exposure. Methods: to create the calibration curve, peripheral blood samples from two participants (one female and one male) were exposed to X-rays at six different dose points ranging from 0 to 17.5 Gy in vitro. The irradiated blood was cultured for 48 hours according to international protocols, and the resulting chromosome rings were recorded. We used BioDoseTools software to calculate the coefficients for the calibration curve. Results: The coefficients of the curve are α: 0.028±0.001 and C: 0.001±0.001. These coefficients have similar values to those reported internationally. The curve was validated by calculating an unknown dose exposed to 6 Gy; the estimated dose was 5.651 ± 0.636 Gy, with no statistically significant differences between the dose delivered and the estimated dose. Conclusions: The INISA Biological Dosimetry Service can use the curve obtained to assess absorbed doses in cases of suspected overexposure to high X-ray doses.

Bright and durable scintillation from colloidal quantum shells

Efficient, fast, and robust scintillators for ionizing radiation detection are crucial in various fields, including medical diagnostics, defense, and particle physics. However, traditional scintillator technologies face challenges in simultaneously achieving optimal performance and high-speed operation. Herein we introduce colloidal quantum shell heterostructures as X-ray and electron scintillators, combining efficiency, speed, and durability. Quantum shells exhibit light yields up to 70,000 photons MeV−1 at room temperature, enabled by their high multiexciton radiative efficiency thanks to long Auger-Meitner lifetimes (>10 ns). Radioluminescence is fast, with lifetimes of 2.5 ns and sub-100 ps rise times. Additionally, quantum shells do not exhibit afterglow and maintain stable scintillation even under high X-ray doses (>109 Gy). Furthermore, we showcase quantum shells for X-ray imaging achieving a spatial resolution as high as 28 line pairs per millimeter. Overall, efficient, fast, and durable scintillation make quantum shells appealing in applications ranging from ultrafast radiation detection to high-resolution imaging.

Anti-tumor effect of high doses of carbon ions and x-rays during irradiation of Ehrlich ascites carcinoma cells ex vivo

The effect of carbon ions (12C) with the energy of 400 MeV/nucleon on the dynamics of induction and growth rate of solid tumors in mice under irradiation of Ehrlich’s ascites carcinoma cells (EAC) ex vivo at doses of 5–30 Gy relative to the action of equally effective doses of X-ray radiation was studied. The dynamics of tumor induction under the action of 12C and X-rays had a similar character and depended on the dose during 3 months of observation. The value of the latent period, both when irradiating cells with 12C and X-ray, increased with increasing dose, and the interval for tumor induction decreased. The rate of tumor growth after ex vivo irradiation of EAC cells was independent of either dose or type of radiation. The dose at which EAC tumors are not induced within 90 days was 30 Gy for carbon ions and 60 Gy for X-rays. The value of the relative biological effectiveness of carbon ions, calculated from an equally effective dose of 50% probability of tumors, was 2.59.

Janus ACSP Nanoparticle for Synergistic Chemodynamic Therapy and Radiosensitization.

Protective autophagy and DNA damage repair lead to tumor radio-resistance. Some hypoxic tumors exhibit a low radiation energy absorption coefficient in radiation therapy. High doses of X-rays may lead to side effects in the surrounding normal tissues. In order to overcome the radio-resistance and improve the efficacy of radiotherapy based on the characteristics of the tumor microenvironment, the development of radiosensitizers has attracted much attention. In this study, a Janus ACSP nanoparticle (NP) was developed for chemodynamic therapy and radiosensitization. The reactive oxygen species generated by the Fenton-like reaction regulated the distribution of cell cycles from a radioresistant phase to a radio-sensitive phase. The high-Z element, Au, enhanced the production of hydroxyl radicals (•OH) under X-ray radiation, promoting DNA damage and cell apoptosis. The NP delayed DNA damage repair by interfering with certain proteins involved in the DNA repair signaling pathway. In vivo experiments demonstrated that the combination of the copper-ion-based Fenton-like reaction and low-dose X-ray radiation enhanced the effectiveness of radiotherapy, providing a novel approach for synergistic chemodynamic and radiosensitization therapy. This study provides valuable insights and strategies for the development and application of NPs in cancer treatment.

Novel transparent NaLu2F7:Tb3+ glass-ceramics scintillator for highly resolved X-ray imaging

Due to the rapid advancements in medical radiography, nondestructive inspection, and radiation detection, there is an increasing demand for scintillators that offer both cost-effectiveness and high-resolution X-ray imaging. In this study, we have successfully synthesized transparent glass-ceramic scintillator by embedding Tb3+-doped NaLu2F7 nanocrystals in a glass matrix. This scintillator demonstrates excellent spatial resolution of 20 lp/mm in X-ray imaging due to its high transmittance (over 90% at 550 nm) and intense luminescent intensity when excited by X-ray (151% higher than that of the Bi4Ge3O12 scintillator). More significantly, the as-synthesized scintillator exhibits exceptional stabilities at high temperature, moisture levels, and moderate radiation exposure. Notably, any decline in performance caused by long-term exposure to high-dose X-ray can be fully recovered through heat treatment at 350 °C for 30 min. These findings highlight the great potential of NaLu2F7:Tb3+ glass ceramics as suitable options for high-resolution and retrievable X-ray imaging.

Preparing the In-doped lead-free Cs3Cu2I5 perovskite scintillator by a co-firing technique for its application in high-resolution X-ray imaging

The perovskite scintillators have been extensively studied recently for their merits of tunable emission spectra and simple preparation processes. However, the practical applications of perovskite scintillator-based X-ray image sensor are still impeded by inadequate radioluminescence, poor environmental stability, and low imaging resolution. Herein, we demonstrate a scalable co-firing method to fabricate high-quality lead-free Cs3Cu2I5 perovskite scintillator and an Indium (In)-doping strategy is introduced to enhance its radioluminescence performance at the same time. The In-doped Cs3Cu2I5 obtains a high PLQY of 77.9% and a relative light output of 53372 ph/MeV, which are 0.34 and 1.08 times higher than those of the undoped counterpart, respectively. The X-ray detection limit of the In:Cs3Cu2I5 can reach 150.55 nGyair/s, 36.53 times lower than the requirement for X-ray medical diagnosis. The synthesized scintillator also shows superior stability under continuous high dose X-ray irradiation of 6800 μGyair/s for 120 minutes, maintaining 95% of its initial radioluminescence intensity. Furthermore, a large-area (300 cm2) flexible perovskite scintillator film is prepared, which owns a much competitive resolution of 10 lp/mm and less distortion in X-ray imaging. This work provides a practical path for the wide application of perovskite scintillator in the field of X-ray detection and imaging in near future.

Radiation shielding assessment for interventional radiology personnel: Geant4 dosimetry of lead-free compositions

The inherent biological hazards associated with ionizing radiation necessitate the implementation of effective shielding measures, particularly in medical applications. Interventional radiology, in particular, poses a unique challenge as it often exposes medical personnel to prolonged periods of high x-ray doses. Historically, lead and lead-based compounds have been the primary materials employed for shielding against photons. However, the drawbacks of lead, including its substantial weight causing personnel’s inflexibility and its toxicity, have raised concerns regarding its long-term impact on both human health and the environment. Barium tantalate has emerged as a promising alternative, due to its unique attenuation properties against low-energy x-rays, specifically targeting the weak absorption area of lead. In the present study, we employ the Geant4 Monte Carlo simulation tool to investigate various formulations of barium tantalate doped with rare earth elements. The aim is to identify the optimal composition for shielding x-rays in the context of interventional radiology. To achieve this, we employ a reference x-ray spectrum typical of interventional radiology procedures, with energies extending up to 90 keV, within a carefully designed simulation setup. Our primary performance indicator is the reduction in air kerma transmission. Furthermore, we assess the absorbed doses to critical organs at risk within a standard human body phantom protected by the shield. Our results demonstrate that specific concentrations of the examined rare earth impurities can enhance the shielding performance of barium tantalate. To mitigate x-ray exposure in interventional radiology, our analysis reveals that the most effective shielding performance is achieved when using barium tantalate compositions containing 15% Erbium or 10% Samarium by weight. These findings suggest the possibility of developing lead-free shielding solutions or apron for interventional radiology personnel, offering a remarkable reduction in weight (exceeding 30%) while maintaining shielding performance at levels comparable to traditional lead-based materials.

Passivation of defective states in single crystal MAPbBr3 and their optoelectronic properties study

We fabricated high-quality Methylpropyl lead bromide (MAPbBr3) single crystals (SC) by introducing moderate amount electron-rich amino-terminated polyoxypropylene (PEA) additives via inverse temperature crystallization (ITC) method. The intramolecular vibrations and defective states of prepared MAPbBr3 single crystals were systemically studied by the in situ variable-temperature Fourier Transform Infrared (FTIR), X-ray photoelectron spectroscopy (XPS), the synchrotron-based X-ray absorption near edge structure (XANES) et al. We find the proper amount PEA additives would prevent the formation of intermediate states and crystal boundaries, passivating the density of defective states. The X-ray detection properties of single-crystal MAPbBr3 crystals were investigated, using both high dose and low dose X-ray photons at 40 keV in synchrotron beamlines. The photocurrent of optimized PEA-treated MAPbBr3 single crystals demonstrate better performance compared with the as-prepared single crystals. Meanwhile, the decay time of MAPbBr3 single crystal is decreased from 376 ns to 17.1 ns by Time-resolved photoluminescence (TRPL) decay measurement, owing to the defect passivation by 0.5 wt% PEA additives. The PEA-treated single crystals possess much faster decay time than the commercialized Cerium-doped Yttrium Aluminum Garnet (Ce:YAG) scintillator (∼100ns). These results help elucidate the passivation of defective states and contribute paths to manufacture high-quality single crystal perovskites for next-generation optoelectronic devices.

In vivo low-dose phase-contrast CT for quantification of functional and anatomical alterations in lungs of an experimental allergic airway disease mouse model.

Synchrotron-based propagation-based imaging (PBI) is ideally suited for lung imaging and has successfully been applied in a variety of in vivo small animal studies. Virtually all these experiments were tailored to achieve extremely high spatial resolution close to the alveolar level while delivering high x-ray doses that would not permit longitudinal studies. However, the main rationale for performing lung imaging studies in vivo in small animal models is the ability to follow disease progression or monitor treatment response in the same animal over time. Thus, an in vivo imaging strategy should ideally allow performing longitudinal studies. Here, we demonstrate our findings of using PBI-based planar and CT imaging with two different detectors-MÖNCH 0.3 direct conversion detector and a complementary metal-oxide-semiconductor (CMOS) detector (Photonics Science)-in an Ovalbumin induced experimental allergic airway disease mouse model in comparison with healthy controls. The mice were imaged free breathing under isoflurane anesthesia. At x-ray dose levels below those once used by commercial small animal CT devices at similar spatial resolutions, we were able to resolve structural changes at a pixel size down to 25 μm and demonstrate the reduction in elastic recoil in the asthmatic mice in cinematic planar x-ray imaging with a frame rate of up to 100 fps. Thus, we believe that our approach will permit longitudinal small animal lung disease studies, closely following the mice over longer time spans.

Assembling Au8 clusters on surfaces of bifunctional nanoimmunomodulators for synergistically enhanced low dose radiotherapy of metastatic tumor

BackgroundRadiotherapy is one of the mainstays of cancer therapy and has been used for treating 65–75% of patients with solid tumors. However, radiotherapy of tumors has two limitations: high-dose X-rays damage adjacent normal tissue and tumor metastases cannot be prevented.ResultsTherefore, to overcome the two limitations of radiotherapy, a multifunctional core–shell R837/BMS@Au8 nanoparticles as a novel radiosensitizer were fabricated by assembling Au8NCs on the surface of a bifunctional nanoimmunomodulator R837/BMS nanocore using nanoprecipitation followed by electrostatic assembly. Formed R837/BMS@Au8 NP composed of R837, BMS-1, and Au8 clusters. Au8NC can enhance X-ray absorption at the tumor site to reduce X-ray dose and releases a large number of tumor-associated antigens under X-ray irradiation. With the help of immune adjuvant R837, dendritic cells can effectively process and present tumor-associated antigens to activate effector T cells, meanwhile, a small-molecule PD-L1 inhibitor BMS-1 can block PD-1/PD-L1 pathway to reactivate cytotoxic T lymphocyte, resulting in a strong systemic antitumor immune response that is beneficial for limiting tumor metastasis. According to in vivo and in vitro experiments, radioimmunotherapy based on R837/BMS@Au8 nanoparticles can increase calreticulin expression on of cancer cells, reactive oxygen species generation, and DNA breakage and decrease colony formation. The results revealed that distant tumors were 78.2% inhibited depending on radioimmunotherapy of primary tumors. Therefore, the use of a novel radiosensitizer R837/BMS@Au8 NPs realizes low-dose radiotherapy combined with immunotherapy against advanced cancer.ConclusionIn conclusion, the multifunctional core–shell R837/BMS@Au8 nanoparticles as a novel radiosensitizer effectively limiting tumor metastasis and decrease X-ray dose to 1 Gy, providing an efective strategy for the construction of nanosystems with radiosensitizing function.

Anti-tumor Effect of High Doses of Carbon Ions and X-Rays during Irradiation of Ehrlich Ascites Carcinoma Cells Ex Vivo.

The effect of carbon ions (12C) with the energy of 400 MeV/nucleon on the dynamics of induction and growth rate of solid tumors in mice under irradiation of Ehrlich ascites carcinoma cells (EAC) ex vivo at doses of 5-30 Gy relative to the action of equally effective doses of X-ray radiation was studied. The dynamics of tumor induction under the action of 12C and X-rays had a similar character and depended on the dose during 3 months of observation. The value of the latent period, both when irradiating cells with 12C and X-ray, increased with increasing dose, and the interval for tumor induction decreased. The rate of tumor growth after ex vivo irradiation of EAC cells was independent of either dose or type of radiation. The dose at which EAC tumors are not induced within 90 days was 30 Gy for carbon ions and 60 Gy for X-rays. The value of the relative biological effectiveness of carbon ions, calculated from an equally effective dose of 50% probability of tumors, was 2.59.

Application of SR-Cu Radioprotector and Tube Current Modulation (TCM) to Reduce Radiation Dose in CT-Scan

CT-Scan using high-dose X-ray radiation has harmful effects on the body or the environment if the utilization is not appropriate. One of the efforts to reduce radiation dose exposure to patients is to use a Silicone Rubber (SR)-Cooper (Cu) mixture as protection during examination. In addition to using composite materials, the mode selection in image capture on CT-Scan modalities can be chosen between Tube Current Modulation (TCM) with constant current. In this study, SR-Cu radioprotector was used for protection in thorax CT-Scan examination with TCM method and a constant current of 200 mAs and variation in Cu composition of 0%, 8%, 10%, and 12% of total radioprotector weight. The results showed that SR-Cu reduced the dose received by the patient by 4.86% while using TCM with SR-Cu reduced the dose by 39.24% compared to TCM without radioprotectors by 37.64%. From the research that has been done, it shows that the use of SR-Cu can increase radiation dose uptake.

Assessing high-energy x-ray and proton irradiation effects on electrical properties of P-GaN and N-GaN thin films

The effects of ionizing and displacement irradiation of high-energy x-ray and 2-MeV proton on GaN thin films were investigated and compared in this study. The electrical properties of both P-GaN and N-GaN, separated from power devices, were gauged for fundamental analysis. It was found that the electrical properties of P-GaN were improved as a consequence of the disruption of the Mg–H bond induced by high-dose x-ray irradiation, as indicated by the Hall and circular transmission line model. Specifically, under a 100-Mrad(Si) x-ray dose, the specific contact resistance ρ c of P-GaN decreased by 30%, and the hole carrier concentration increased significantly. Additionally, the atom displacement damage effect of a 2-MeV proton of 1 × 1013 p/cm2 led to a significant degradation of the electrical properties of P-GaN, while those of N-GaN remained unchanged. P-GaN was found to be more sensitive to irradiation than N-GaN thin film. The effectiveness of x-ray irradiation in enhancing the electrical properties of P-GaN thin films was demonstrated in this study.

Enhanced low-dose x-ray sensing nature of nanocrystalline CaWO4 sensor

Extensive research on the development of superior sensitive X-ray sensors by many researchers is due to their increased demand in numerous fields, like medical radiography, security inspection, and scientific research areas. Especially in healthcare, repeated or long-term high-dose X-ray exposure on patients may cause serious health hazards. Therefore, developing a superior sensing low dose X-ray sensor is essential. In this present work, a nanocrystalline CaWO4 thick film above an interdigitated electrode was developed as a direct conversion X-ray sensor that operates at different low doses (mGy) using an intraoral pulsed X-ray (70 keV) machine. The X-ray instigated photocurrent of nano-CaWO4 thick film was examined under different applied bias to obtain superior sensitivity of the device. The nano-CaWO4 thick film exhibit sensitivity of 10 nC/mGycm3 at 0.20 mGy (0.06 s) low dose under 5 V applied bias. A suitable mechanism was proposed to explain the nano-CaWO4 thick film sensing behaviour at different biased conditions.