High Content Research Articles

Mechanical and tribological performance of NaOH-Treated bamboo fiber-reinforced recycled HDPE composites under fretting wear conditions

ABSTRACT The study investigates the impact of bamboo fiber reinforcement on the mechanical and tribological properties of recycled high-density polyethylene (rHDPE) composites. Bamboo fibers extracted from locally sourced Bambusa Balcooa were subjected to a comprehensive alkali treatment to enhance their properties, including increased crystallinity, thermal stability, and altered morphology. The treated bamboo fibers were incorporated into rHDPE using a compression molding technique at varying weight percentages (0.5–2.0 wt-%). The results revealed that optimal mechanical performance, particularly tensile strength (155.7 MPa) and modulus (6.6 GPa), was achieved at 1.5 wt-% fiber content, attributed to effective load transfer between the matrix and fibers. Beyond this content, performance declined due to fiber agglomeration and poor dispersion. Flexural properties mirrored these findings, with the highest strength (207.5 MPa) and modulus (11.7 GPa) observed at 1.5 wt-%. Thermogravimetric analysis (TGA) and X-ray diffraction confirmed enhanced thermal stability and crystallinity in treated fibers. Fretting wear tests indicated a reduction in the coefficient of friction with increased fiber content, particularly at lower loads, while wear loss was minimized at 1.5 wt-% BF, suggesting optimal reinforcement. SEM analysis highlighted microstructural changes, including fiber pull-out, debonding, and void formation, correlating with the observed mechanical degradation at higher fiber contents. .

The MdCo gene encodes a putative 2OG-Fe (II) oxygenase that positively regulates salt tolerance in transgenic tomato and apple

Salinity stress is a significant environmental factor that impacts the growth, development, quality, and yield of crops. The 2OG-Fe (II) oxygenase family of enzyme proteins plays crucial roles in plant growth and stress responses. Previously, we identified and characterized MdCo, which encodes a putative 2OG-Fe (II) oxygenase, a key gene for controlling the columnar growth habit of apples. In this study, we explored the role of MdCo in salt stress tolerance. Expression analysis suggested that MdCo exhibits high expression in roots and is significantly induced by NaCl stress. Ectopic expression of MdCo exhibited enhanced salt stress tolerance in transgenic tomatoes, and these plants were characterized by better growth performance, and higher chlorophyll content, but lower electrolyte leakage and malondialdehyde (MDA), and less hydrogen peroxide (H2O2) and superoxide radicals (O2-) under salt stress. Overexpression of MdCo can effectively scavenge reactive oxygen species (ROS) by enhancing the activities of antioxidant enzymes and up-regulating the expression of stress-associated genes under salt stress, thereby enhancing salt tolerance in apple calli. Collectively, these findings provide new insights into the function of MdCo in salt stress tolerance as well as future potential application for apple breeding aimed at improving salt stress tolerance.

Experimental investigation of solid propellants combustion response to pressure oscillations using advanced high-resolution diagnostics

The combustion response of solid propellants plays a crucial role in determining the combustion stability of solid rocket motors (SRMs). This study employs multiple advanced combustion diagnostic techniques, including high-speed photomicrography, two-color pyrometry, and laser shadowgraphy, to simultaneously capture mesoscale flame dynamics and burning surface regression characteristics of AP/HTPB composite propellants under pressure oscillations. This experimental configuration enables the simultaneous achievement of high temporal resolution (0.25 ms) and spatial resolution (4.9μm/pixel). Pressure oscillations are generated by loudspeakers, cover a range of frequencies (168.9 Hz to 506.7 Hz) and amplitudes up to approximately 0.44% of the equilibrium pressure. The investigated propellants exhibit varying oxidizer characteristics, including coarse (330μm) and fine (150μm) AP particle sizes, as well as different AP mass fractions (81% and 86%). Results reveal that finer oxidizer particles and higher oxidizer content both result in an increased mean steady burning rate, with the former exhibiting a more pronounced influence on the burning rate increment. Under pressure oscillations, the mean burning rate increases with increasing pressure oscillation amplitude, accompanied by a reduction in flame height, an expansion in mean flame swing angle, and an elevation in mean flame temperature. The observed frequency dependency indicates a stronger combustion response when the oscillation frequency aligns with the characteristic frequency of propellant, which is closely associated with the mean burning rate, irrespective of the amplitude of pressure oscillation. This frequency-dependent phenomenon results in the highest combustion response, characterized by a maximum mean burning rate increment exceeding 165%. The innovative experimental platform employed in this study demonstrates the capability to simultaneously capture various flame fluctuation characteristics, such as flame swinging, flame temperature, and burning rate fluctuation in a single test. This facilitates a more thorough and comprehensive analysis of combustion responses in solid propellants under pressure oscillations.

Interpretable physics-aware alkali-silica reaction expansion prediction

The alkali-silica reaction (ASR) is a major contributor to the aging and degradation of infrastructure. Understanding ASR-induced expansion in concrete structures and accurately predicting its future progression are critical components of effective risk assessment frameworks. This paper presents a study focused on developing and interpreting an advanced machine learning model specifically designed to predict ASR expansion. The model strategically integrates two powerful algorithms to achieve this goal. A comprehensive database comprising 2000 samples of ASR expansion data with various attributes was used to train the model. The first algorithm, eXtreme Gradient Boosting (XGBoost), was employed to establish a predictive model for ASR expansion, achieving approximately 90% validation accuracy. The second algorithm, SHapley Additive exPlanations (SHAP), was applied to assess the relative importance of the factors influencing the XGBoost model’s predictions. This approach provided valuable physical and quantitative insights into the input–output relationships, which are often obscured in conventional machine learning methods. The study revealed that higher silica content, elevated alkali levels, and longer reaction times are strongly correlated with increased ASR expansion. In contrast, larger aggregate sizes and higher water-to-cement ratios were associated with reduced expansion. Additionally, the analysis identified alkali content as the most influential factor in determining the ultimate ASR expansion, while silica content emerged as the key parameter affecting the characteristic time of the ASR curve.

Correlation analysis between Radix Pseudostelariae quality and rhizosphere soil factors of Pseudostellaria heterophylla in a cultivation region, China.

Pseudostellaria heterophylla, known for its significant bioactive ingredients, offers potential health benefits. Amounts of bioactive compounds of the tuberous root of cultivated Pseudostellaria heterophylla are sensitive to environmental conditions. We selected 22 sampling sites in Guizhou Province, China, a primary Pseudostellaria heterophylla planting area. We analyzed polysaccharides, water-soluble extractives, total ash and inorganic elements (Fe, Mn, Zn, Mg and Ca) in Radix Pseudostellariae, and pH, organic carbon (OC), available nitrogen (AN), available phosphorus (AP), available potassium (AK) and inorganic elements in the soil. Our study revealed a substantial presence of polysaccharides (85.00-181.00 mg g-1), water-soluble extractives (47.52-57.63%) and total ash (1.87-3.39%) in Radix Pseudostellariae. Polysaccharides and total ash showed no sensitivity to soil pH. Radix Pseudostellariae collected from soil with pH > 7 exhibited slightly higher levels of water-soluble extractives, Mg and Ca than that from soil with pH < 5. Conversely, soil with a pH less than 5 had higher OC, AN, AP and AK contents. Water-soluble extractives in Radix Pseudostellariae were negatively correlated with soil pH but positively correlated with OC and AN. The results imply that the sequestration of soil nutrients over long-term Pseudostellaria heterophylla cultivation could negatively impact the accumulation of some bioactive ingredients in Radix Pseudostellariae. This study has a profound implication for enhancing the quality of Radix Pseudostellariae of artificially cultivated Pseudostellaria heterophylla. © 2024 Society of Chemical Industry.

Biochemically Programmable Isothermal PCR.

Isothermal PCR can be performed by imposing a static temperature gradient that continuously circulates reagents through denaturing, annealing, and extension conditions inside a PCR tube. But despite early promise, these systems have yet to demonstrate performance and repeatability sufficient for adoption in validated laboratory tests because the rate-limiting extension step is inherently short and cannot be increased independently of the other stages in a temperature cycle. Here, a discovery that enables isothermal PCR to be achieved with statistically robust repeatability that meets or exceeds diagnostic assay requirements (false positive/negative rate <8% at 95% confidence) by manipulating the interplay between the DNA replication biochemistry (via the amplicon GC content) and the microscale circulatory flow inside a PCR tube is reported. Surprisingly, optimal performance depends on selecting primer sequences that replicate high GC content amplicons, contradicting established PCR primer design rules. This innovative thermocycling approach accelerates PCR to speeds rivaling ultra-fast instruments, enabling rapid, repeatable isothermal DNA analysis across a range of targets relevant to diagnostics and pathogen detection.

Annealing Behavior of a Mg-Y-Zn-Al Alloy Processed by Rapidly Solidified Ribbon Consolidation

Mg-Y-Zn-Al alloys processed by the rapidly solidified ribbon consolidation (RSRC) technique are candidate materials for structural applications due to their improved mechanical performance. Their outstanding mechanical strength is attributed to solute-enriched stacking faults (SESFs), which can form cluster-arranged layers (CALs) and cluster-arranged nanoplates (CANaPs) or complete the long-period stacking ordered (LPSO) phase. The thermal stability of these solute arrangements strongly influences mechanical performance at elevated temperatures. In this study, an RSRC-processed Mg—0.9%, Zn—2.05%, Y—0.15% Al (at%) alloy was heated at a rate of 0.666 K/s up to 833 K, a temperature very close to melting point. During annealing, in situ X-ray diffraction (XRD) measurements were performed using synchrotron radiation in order to monitor changes in the structure. These in situ XRD experiments were completed with ex situ electron microscopy investigations before and after annealing. At 753 K and above, the ratio of the matrix lattice constants, c/a, decreased considerably, which was restored during cooling. This decrease in c/a could be attributed to partial melting in the volumes with high solute contents, causing a change in the chemical composition of the remaining solid material. In addition, the XRD intensity of the secondary phase increased at the beginning of cooling and then remained unchanged, which was attributed to a long-range ordering of the solute-enriched phase. Both the matrix grains and the solute-enriched particles were coarsened during the heat treatment, as revealed by electron microscopy.

Biofunctionality of a new vinegar rich in anthocyanin from red-fleshed Niedzwetzky's apple: An ornamental plant.

In recent years, red-fleshed apple has attracted a lot of attention due to its pleasant appearance, taste, and being a valuable source of anthocyanins. Generally, different types of this apple are known as ornamental apple plants that are rarely found in various regions around the world like New Zealand, Kazakhstan, Kyrgyzstan, Australia,China, and Turkey. This study focused on the accumulation and changes of the bioactive and aroma-related volatile components at different production stages of a red-fleshed apple vinegar. The aim of this study is to produce an anthocyanin- and vitamin C-rich vinegar (NAV) from red-fleshed Niedzwetzky's apple for the first time. According to the results, in this vinegar, it wasdetermined high concentrations of total phenolic content (904.8mg-GAE/mL), total flavonoid content (0.25mg-EGCE/mL), vitamin C content (3024.3mg-AAE/mL), and 1,1-diphenyl-2-picrylhydrazyl (8.33mmol-TE/mL), as well as FRAP (13.57mmol-ISE/mL), respectively. Moreover, total anthocyanin content value was found to be 6.46mg/g. One of the components that provide the specified functional effect in this vinegar is chlorogenic acid, which constitutes the main phenolic compound, and the other one is cyanidin-3-glucoside, which is the major anthocyanin in this vinegar. The main volatile components associated with the aroma of vinegar are -acetic acid, -phenylacetic acid (5067.7µg/100mL), -phenethyl alcohol (3096.1µg/100mL), and -nonanoic acid (2939.0µg/100mL) compounds. Consequently, it is recommended to expand the range of Niedzwetzky's apples in the production and consumption of food products such as functional vinegar. Thus, a new vinegar with high functional properties will be introduced to the worldwide food industry. PRACTICAL APPLICATION: In this study, vinegar was produced from the small and dark-red-flesh-colored fruits of Niedzwetzky's apple tree, which is known in a small part of the world and is generally used as an ornamental plant due to its red-pink flowers. It has been determined that the produced vinegar has high bioavailability due to the apples with red inner flesh and high anthocyanin content and has a desirable aromatic content. Thus, a food product with high functional quality and desirable aroma, accessible to consumers all over the world, has been produced from a little-known fruit.

Element accumulation in the tracheal and bronchial cartilages of monkeys

Compositional changes in the tracheal and bronchial cartilages can affect respiratory ventilation and lung function. We aimed to elucidate element accumulation in the tracheal and bronchial cartilages of monkeys and divided it into four sites: the tracheal, tracheal bifurcation, left bronchial, and right bronchial cartilages. The elemental content was analyzed using inductively coupled plasma atomic emission spectrometry.The average calcium content was two to three times higher in the tracheal cartilage than in the other three cartilages. The trends of phosphorus and zinc were similar to those of calcium. The average calcium, phosphorus, and zinc cartilage contents were the highest in the tracheal cartilage and decreased in the following order: the left bronchial, right bronchial, and tracheal bifurcation cartilages. These findings revealed that differences existed in element accumulation between different sites within the same airway cartilage and that calcium, phosphorus, and zinc accumulation mainly occurred in the tracheal cartilage.A substantial direct correlation was observed between age and calcium content in the tracheal and bronchial cartilages and all such monkeys with high calcium content were > four years of age. These results suggest that calcium accumulation occurs in the tracheal and bronchial cartilages after reaching a certain age.An extremely substantial direct correlation was observed between calcium and phosphorus contents in the tracheal and bronchial cartilages. This finding is similar to the previously published calcium and phosphorus correlations in several other cartilages, suggesting that the calcium and phosphorus contents of cartilage exist in a certain ratio.

Distribution law of Chang 7 Member tight oil in the western Ordos Basin based on geological, logging and numerical simulation techniques

Abstract Fine characterization of oil plane distribution in highly heterogeneous tight sandstone is a prerequisite for efficient reservoir development. This study systematically evaluated the distribution characteristics of tight oil in the Chang 7 Member of the Western Ordos Basin using a large number of experimental tests, logging interpretation, and 3D modelling methods. The logging interpretation models of shale content, porosity, permeability, and oil saturation were constructed, and the effective reservoir was identified by establishing the intersection identification pattern of reservoir acoustic wave time difference and deep lateral resistivity. The 3D numerical simulation results showed that the tight oil is distributed between injection and production wells. The areas with high tight oil content are mainly distributed along the WE direction, and a series of high remaining oil zones are formed locally. Under the influence of long-term injection and production, a high permeability zone will be formed between wells, which is similar to a high-speed channel and will be flooded quickly, and a banded remaining oil retention zone will be formed around it. For the horizontal well flooding area, the water flooding range of the water injection well is small, and a large amount of remaining oil is enriched between water injection wells. Finally, the classification standard of the remaining oil in the Chang 72 sub-member of the study area is proposed, and then, the strategy of adopting different development and adjustment schemes according to different types of reservoirs is formed.

XCT images-based modeling for elucidating electrochemical inert phase-dependent multiscale electrode kinetic behaviors

The electrochemically inert phase (EIP) within the electrode is formed by the combination of carbon black and binder, characterized by a highly heterogeneous spatial distribution and structural morphology. This heterogeneity impairs electrode performance under varying discharge rates and temperatures. In this study, X-ray computed tomography is employed to image the original electrode. The resulting grayscale images are digitally processed to reveal the two-dimensional (2D) and three-dimensional (3D) features of the EIP morphology, thereby providing a design window to understand the influence of EIP morphology. The physical structure characterization indicates that, compared to bulk-like EIP (B-EIP), film-like EIP (F-EIP) tends to cover the active surface of the active material (AM), exacerbating the heterogeneity of the lithiation reactions within the electrode. The reduction in the AM active surface area correlates the state of lithiation (SOL) of particles with their active specific surface area (αa). At low temperatures, the temperature sensitivity of electrodes intensifies the risk of αa loss, promoting heterogeneous reaction transfer between particles. The Biot number (Bi) is used to evaluate the competing mechanisms between interfacial reactions and bulk diffusion within particles. In electrodes with a high EIP content, the reaction rate at the particle/electrolyte interface is accelerated, causing particle performance to be dominated by interfacial reactions. Finally, the electrochemistry and heat generation from the particle-level to the electrode-level in thicker electrodes are examined. It demonstrates that ion diffusion in the pore controls interfacial reactions and heat transport behavior. Aggregated high-flux reactions and localized hot spots exacerbate the heterogeneous degradation and side reactions within the electrode.

Emerging Nanotechnology Involved in Skin Cancer: Pathogenesis, Biomarkers, Ethosomal Formulation and Future Perspective.

Skin cancer, which comprises both melanoma and non-melanoma forms, is frequently diagnosed as the predominant malignancy among today's population. Existing treatments are often prolonged and complex, have a low rate of success, and have side effects. This complexity leads to poor patient adherence and increases the risk of disease recurrence. Ethosomes, extensively studied for their applications in topical and transdermal therapies, are distinguished by their high ethanol content, which facilitates enhanced skin penetration and efficient drug delivery. Compared to traditional liposomes, ethosomes offer notable advantages due to their unique composition, demonstrating potential efficacy in treating various skin conditions, including basal cell carcinoma, squamous cell carcinoma, and melanoma. The present review provides a brief introduction to skin melanoma and its pathogenesis, signalling pathways, biomarkers, the need for ethogel-based drug delivery, applications of ethosomes against skin cancer, and clinical trials.

Trends in the Treatment of Chronic Wounds.

Chronic wounds remain one of the significant burdens to health across the world, mainly in view of diabetes and its natural consequences. This category of lesions includes pressure ulcers, vascular diseases, and surgery-related wounds, which affect millions and pose a major challenge to the healthcare industry. The paper reviews the various physiological mechanisms of wound healing, factors that impede it, and some new treatments emerging at this moment. In contrast, current developments include surgical and non-surgical alternatives like topical dressings, medicated formulations, and skin substitutes. Advanced wound care today covers tissue-engineered skin substitutes, 3D-printed wound dressings, topical medicated formulations, and growth factor-based therapies. These are non-invasive, biocompatible methods that are cost-effective, userfriendly, and more conducive to natural healing than traditional therapies. Hydrogel dressings have high water content to create a moist environment that encourages healing. They also reflect excellent physicochemical and biological properties, which enhance autolytic debridement and reduction of pain due to the moisture retention, biocompatibility, and non-toxicity conferred. Tissue-engineered skin substitutes, comprising allogeneic or autologous cells, wound-healing enhancement bioengineered allogeneic cellular therapies are like the natural skin and encourage regeneration. 3D printing allows the production of customized dressings to aid in better treatment. Newer therapies, including bioengineered allogeneic cellular therapies and fish skin grafting, require more clinical trials to confirm safety and efficacy. With such innovations in wound healing technologies and therapies, the future looks quite promising in managing chronic wounds, enhancing healing, reducing healthcare expenditure, and promoting a better quality of life for patients.

Characterization and processing of kaolin from southern Brazil for potential strategic application in the porcelain stoneware tiles manufacturing

The ceramic industry in the productive hub of Santa Catarina needs some raw materials with specific characteristics such as kaolin to manufacture its products. This clay mineral with a naturally variable chemical composition in relation to its geolocation (in extraction area composed by rock and combined with sediment materials), attributes significant increases in transport costs due to its distance from the main productive areas in southern Brazil. Thus, as a strategic alternative, the improvement of kaolin with a high quartz content (69.9%) from the northern region of the state of Santa Catarina (∼400 km from ceramic hub in the south of the state), more precisely from the municipality of Garuva, was sought. Unit processing operations by classifying this mineral for suitability for use in industry, resulted in an increase in the concentration of kaolinite. The results indicated that the proposed method reduced the amount of quartz and consequently increased the kaolinite content, resulting in an aluminum oxide content of approximately 28.20%, a value higher than the normal natural content of ∼19%.

Geological and oceanographic constrains on the deposit of ferromanganese nodules on the archipelagic aprons of seamounts

The archipelagic aprons of the large deep-sea seamounts of the northwestern Pacific Ocean (NWPO) show potential areas for significant reserves of ferromanganese nodules (FMNs). This study used datasets such as depth, backscatter intensity (BI), and optical coverage in conjunction with mineralogical, element geochemical, Sr-Nd-Pb isotopic, and chronological analyses of FMNs of the Suda Guyot (SG), which was located on the central area of the Marcus-Wake seamounts, in the NWPO. The results indicated a Y-shaped distribution of the deposit on the northern apron of the SG. Landslides predated the mineralization processes of the FMN deposit, and the ubiquitous channels in the apron had largely minimal influence on the distribution of nodules. Current mineralization of the deposit has been ongoing for ∼10 Myrs. Continuous weakening of the Antarctic Bottom Water (AABW) resulted in a gradual decrease in bottom water oxygen contents around the SG. This in turn resulted in a decrease in cryptocrystalline Fe-vernadite (δ-MnO2) and elemental contents associated with δ-MnO2 of FMNs, such as Mo, Te, and Tl. Meanwhile, the contribution of Asian dust to the study area increased, leading to increased Fe, which in turn increased amorphous ferrihydrite (FeOOH), and FeOOH-associated elements such as Ti, Pb, and Th. Productivity gradually increased to its peak value around 4–5 Myrs ago, leading to similar trends in REY, Ba, and U. REY contents exhibited a certain correlation with water depth around the SG. The results of this study suggest that the Carbonate Compensation Depth (CCD) variation resulted in higher content of REY of the FMNs in the shallower apron.

Dietary supplementation with a blend composed of carvacrol, tannic acid derived from Castanea sativa and Glycyrrhiza glabra, and glycerides of medium chain fatty acids for weanling piglets raised in commercial farm.

This study aimed to evaluate the dietary administration of a blend composed of carvacrol, tannic acid derived from Castanea sativa mill and Glycyrrhiza glabra, medium chain fatty acids (MCFAs) glycerides for weanling piglets. An in vitro digestion followed by total phenolic content (TPC) and total antioxidant activity (TAC) assessment was performed before the in vivo application. At weaning, a total of 210 piglets were randomly allocated to two experimental treatments (7 replicates/15 piglets for each replicate). Control group (CTR) was fed a standard basal diet while the treated group (T) was fed the basal diet mixed with 1.500mg/kg of blend. After in vitro digestion, TPC and TAC evidenced peaks at the end of oral and gastric phases in comparison to the intestinal one in line with the high content of phenolic compound (P < 0.05). Treatment conditioned body weight and average daily gain (P < 0.05), fecal score on 6, 7, and 8 d after weaning (P < 0.05). At 35d, the T group showed a decrease in salivary cortisol compared to CTR (P < 0.05). Duodenum and jejunum sections of T piglets revealed higher villi (P < 0.05), deeper crypts (P < 0.01), and increased V/C ratio (P < 0.01). CTR showed a higher expression of duodenal Occludin (P < 0.05). Jejunal E-cadherin and Occludin were more expressed in T jejunum sections (P < 0.05). Twelve differentially abundant genera were identified in T group caecal samples. Potentially harmful Clostridium sensu stricto 13 was reduced by the treatment (P < 0.05). In conclusion, the tested blend positively affected salivary stress markers and the gut health of weaned piglets.

Differences in reservoir quality within distributary channel belts at the braided river delta front in the Xinchang area of Western Sichuan’s 2nd member of the Xujiahe Formation: genesis and implications

AbstractThe tight sandstone reservoris are important exploration and production target in the Xujiahe Formation in Xinchang area of Western Sichuan. Due to the various lithofacies and diagenetic alteration in distributary channel belt sandstones, the reservoirs exhibit strong heterogeneity. The strong heterogeneity makes the identification of petrologically superior sandbodies a great challenge. In order to better understand reservoir quality, this study constructs a model between diagenetic alterations and reservoir quality within distributary channel belts. 73 plug samples were taken from 17 wells located in the channel belt. An integration of thin sections, X-ray diffraction, carbon and oxygen isotope ratios, cathodoluminescence, and micro-CT were analysed for the genesis and distribution of reservoir quality. The results show that subaqueous distributary channels are formed under various hydrodynamics, resulting in different lithofacies. The thicknesses of channels can be divided into less than 2 m, 2–6 m, and more than 6 m. The diagenetic alteration in lithofacies were identified. Coarse-grained sandstones with low content of rock fragments are relatively weakly compacted with less calcite and chlorite cementation. Fine-grained sandstones with high content of rock fragments are strongly compacted with calcite cementation during early diagenesis. The dissolution pores are related to the soluble mineral content and the distribution of mudstones. The subaqueous distributary channels formed in high-energy, moderate-energy, and low-energy hydrodynamic settings have experienced different diagenetic intensities. Additionally, fractures can effectively improve the reservoir properties. The distribution of good quality reservoirs is controlled by the combined influence of diagenetic heterogeneity and fractures. This would help to promote better understanding of reservoir quality within the subaqueous distributary channel belts in braided-river delta front.

Molecular understanding of speciation transformation of phosphorus and sulfur in food waste digestate during hydrothermal treatment

Recovering phosphorus (P) and sulfur (S) from biowaste is a key strategy to address the current P resources shortage and soil S deficiency. Food waste digestate (FWD) contains high contents of P and S, while its direct application is severely limited by available nutrient leaching loss and pollutant exposure. Hydrothermal treatment (HT) is an effective technique for biowaste disposal, enabling detoxification and resource recovery. The study systematically investigated the speciation transformation of P and S in FWD during HT, using chemical extraction and in-situ X-ray absorption near-edge structure (XANES) spectroscopy. The results revealed that up to 98% of P in FWD was enriched in the solid product (hydrochar) after HT, with organic P and labile P being converted into stable Ca-bound forms, predominantly hydroxyapatite. This transformation reduced the risk of P leakage loss compared to untreated FWD. Interestingly, the S speciation evolution exhibited more complexity. The highest S proportion in hydrochar of 73.6% was observed at 140 °C under HT. As the temperature increased from 140 °C to 180 °C, S in the hydrochar gradually dissolved into the liquid phase, attributed to unstable aliphatic compounds (mercaptan) and the sulfides oxidizing to sulfates. Above 180 °C, intermediate oxidation states and sulfates were reduced and formed metal sulfides. These findings have important implications for understanding the viability of HT for FWD disposal and the value-added utilization of FWD.

Integrated Amorphous Carbon Film Temperature Sensor with Silicon Accelerometer into MEMS Sensor

Amorphous carbon (a-C) has promising potential for temperature sensing due to its outstanding properties. In this work, an a-C thin film temperature sensor integrated with the MEMS silicon accelerometer was proposed, and a-C film was deposited on the fixed frame of the accelerometer chip. The a-C film was deposited by DC magnetron sputtering and linear ion beam, respectively. The nanostructures of two types of films were observed by SEM and TEM. The cluster size of sp2 was analyzed by Raman, and the content of sp2 and sp3 of the carbon film was analyzed by XPS. It showed that the DC-sputtered amorphous carbon film, which had a higher sp2 content, had better temperature-sensitive properties. Then, an integrated sensor chip was designed, and the structure of the accelerometer was simulated and optimized to determine the final sizes. The temperature sensor module had a sensitivity of 1.62 mV/°C at the input voltage of 5 V with a linearity of 0.9958 in the temperature range of 20~150 °C. The sensitivity of the sensor is slightly higher than that of traditional metal film temperature sensors. The accelerometer module had a sensitivity of 1.4 mV/g/5 V, a nonlinearity of 0.38%, a repeatability of 1.56%, a total thermomechanical noise of 509 μg over the range of 1 to 20 Hz, and an average thermomechanical noise density of 116 µg/√Hz, which is smaller than the input acceleration amplitude for testing sensitivity. Under different temperatures, the performance of the accelerometer was tested. This research provided significant insights into the convenient procedure to develop a high-performance, economical temperature–accelerometer-integrated MEMS sensor.

Experimental study on fracture failure characteristics evaluation of wooden pallets in humid-cold environment based on piezoelectric technology

Wooden pallets often suffer mechanical damage during transportation, stacking, forklifting, and on-site handling in cold supply chain logistics. In humid-cold environments, the fracture properties of wooden pallets change, increasing the risk of sudden fracture failure. Understanding the fracture failure characteristics of wooden pallets is essential to prevent further damage to goods. Nevertheless, evaluating and identifying these characteristics currently presents significant challenges. This study investigates the changes in modulus of elasticity (MOE) and fracture failure characteristics including modulus of rupture (MOR), brittleness and toughness of wooden pallets and impact toughness of wood material under humid-cold conditions. The piezoelectric technology was applied to evaluate and identify fracture risk of wooden pallets used in various humidity and cold conditions. Quarter-sized wooden pallets and standard wood specimens were examined by laboratory study. The experimental results showed that the MOE, MOR, toughness of wooden pallets and impact toughness of wood with higher moisture content (MC) increased with decreasing temperature, while brittleness increased as temperature decreased. These results indicate that the maximum carrying ability of wooden pallets increases in humid-cold environments while the ability to resist fracture was reduced with a higher brittle rupture risk. The toughness and its corresponding piezoelectric voltage exhibited good consistency with changes in temperature and MC. The relationship between toughness and piezoelectric voltage was established with good coefficient of determination (over 0.81). It indicates that the risk of wooden pallets could be predicted effectively using piezoelectric technology.