High Concentrations Of Organic Solvents Research Articles

Enhanced Organics Removal Using 3D/GAC/O3 for N-Containing Organic Pharmaceutical Wastewater: Accounting for Improved Biodegradability and Optimization of Operating Parameters by Response Surface Methodology

Pharmaceutical industry effluents often contain high concentrations of refractory organic solvents, chemical oxygen demand (COD), and total dissolved solids (TDSs). These wastewaters, including N-containing organic solvents known for their persistence and toxicity, pose significant environmental challenges. The study evaluated the efficacy of 3D/Granular Activated Carbon (GAC)/O3 treatment compared to linear process additions when treating real pharmaceutical wastewater, and revealed a 2.73-fold enhancement in COD mineralization. The process primarily involves the direct oxidation of monoprotic organic acids found in real pharmaceutical effluents, such as acetic and formic acid, crucially influencing mineralization rates. Optimal conditions determined via the response surface methodology were 125 g/L GAC, 30 mA/cm2, and 75 mg/L O3, achieving high total organic carbon (TOC) and COD removal efficiencies of 87.19 ± 0.19% and 89.67 ± 0.32%, respectively (R2 > 0.9), during verification runs. Current density emerged as the key parameter for organic abatement, aligning with the emphasis on direct oxidation at the anode surface. This integrated approach enhances biodegradability (BOD5/COD) and reduces acute toxicity associated with persistent N-containing solvents, demonstrating promising applications in pharmaceutical wastewater treatment.

Selection of organic solvents as reaction media for laccase from Trametes versicolor

The ability of laccases to work effectively in properly selected aqueous-organic solutions significantly expands the scope of their application, making them commercially attractive and more competitive. However, it must be considered that molecules of organic solvent are very aggressive towards enzymes and destroy weak non-covalent interactions that maintain the spatial structure of the protein. In this work, we quantitatively described the influence of the nature of water-miscible organic solvents and their concentration on the activity and stability of Trametes versicolor laccase during the oxidation of ABTS (2,2-azino-bis (3-ethylbenzothiazoline-6-sulfonic acid)) through the maximum rates and the Michaelis constants KM. The obtained kinetic parameters make it possible to compare the effect of various organic solvents on laccase and select the most optimal one, which minimizes the decrease in enzyme activity, maintains its stability and allows repeated use. Among the solvents studied, polyhydroxy compounds have the least negative effect on laccase activity; however, in all cases, a high concentration of organic solvent (≥30% (v/v)) leads to suppression of enzymatic activity. It has been shown that the longer the alkyl chain (hydrophobic fragment of the structure), the stronger the negative effect of alcohols on enzymes. The most toxic solvent for Trametes versicolor laccase is isopropanol. In addition, numerous examples of various uses of Trametes versicolor in aquatic-organic environments are discussed here.

Investigation of Antibody Tolerance in Methanol for Analytical Purposes: Methanol Effect Patterns and Molecular Mechanisms.

The extraction of targets from biological samples for immunoassays using organic solvents, such as methanol, is often necessary. However, high concentrations of organic solvents in extracts invariably lead to instability of the employed antibody, resulting in poor performance of the immunoassay. Evaluating the tolerance ability and exploring the molecular mechanisms of antibody tolerance in organic solvents are essential for the development of robust immunoassays. In this work, 25 monoclonal antibodies and methanol are utilized as models to address these questions. A novel protocol is initially established to precisely and rapidly determine antibody tolerance in methanol, identifying two distinct methanol effect patterns. Through a detailed investigation of the structural basis, a novel hypothesis regarding methanol effect patterns is proposed, termed "folding-aggregation," which is subsequently validated through molecular dynamics simulations. Furthermore, the investigation of sequence basis reveals significant differences in residue types within the complementarity-determining regions and ligand-binding residues, distinguishing the two antibody methanol effect patterns. Moreover, the methanol effect patterns of the antibodies are defined by germline antibodies. This work represents the first exploration of antibody methanol effect patterns and associated molecular mechanisms, with potential implications for the discovery and engineering of tolerant antibodies for the development of robust immunoassays.

High concentration of organic solvents in aluminum MAO: A study of structural and tribological property

Ceramic coatings were prepared on the surface of 6061 aluminum alloy using micro arc oxidation (MAO) with high concentration of polyethylene glycol (PEG200) as electrolyte. In this paper, the real-time discharge process of MAO in different volume ratios of PEG200 electrolyte was recorded and the coatings were characterized as well as tested for abrasion and corrosion resistance. The results show that the coatings prepared in 50% PEG200 electrolyte produce more hard alumina crystalline phases with better surface lubrication and wear resistance, but higher porosity reduces their corrosion resistance. This is thought to be related to adsorption of molecular chains as well as soft spark discharge. By preparing high quality coatings in high concentrations of organic solvents, a feasible solution is provided to improve the structure and properties of the coatings.

A novel, robust peptidyl-lys metalloendopeptidase from Trametes coccinea recombinantly expressed in Komagataella phaffii

A novel peptidyl-lys metalloendopeptidase (Tc-LysN) from Tramates coccinea was recombinantly expressed in Komagataella phaffii using the native pro-protein sequence. The peptidase was secreted into the culture broth as zymogen (~38 kDa) and mature enzyme (~19.8 kDa) simultaneously. The mature Tc-LysN was purified to homogeneity with a single step anion-exchange chromatography at pH 7.2. N-terminal sequencing using TMTpro Zero and mass spectrometry of the mature Tc-LysN indicated that the pro-peptide was cleaved between the amino acid positions 184 and 185 at the Kex2 cleavage site present in the native pro-protein sequence. The pH optimum of Tc-LysN was determined to be 5.0 while it maintained ≥60% activity between pH values 4.5—7.5 and ≥30% activity between pH values 8.5—10.0, indicating its broad applicability. The temperature maximum of Tc-LysN was determined to be 60 °C. After 18 h of incubation at 80 °C, Tc-LysN still retained ~20% activity. Organic solvents such as methanol and acetonitrile, at concentrations as high as 40% (v/v), were found to enhance Tc-LysN’s activity up to ~100% and ~50%, respectively. Tc-LysN’s thermostability, ability to withstand up to 8 M urea, tolerance to high concentrations of organic solvents, and an acidic pH optimum make it a viable candidate to be employed in proteomics workflows in which alkaline conditions might pose a challenge. The nano-LC-MS/MS analysis revealed bovine serum albumin (BSA)’s sequence coverage of 84% using Tc-LysN which was comparable to the sequence coverage of 90% by trypsin peptides.Key points•A novel LysN from Trametes coccinea (Tc-LysN) was expressed in Komagataella phaffii and purified to homogeneity•Tc-LysN is thermostable, applicable over a broad pH range, and tolerates high concentrations of denaturants•Tc-LysN was successfully applied for protein digestion and mass spectrometry fingerprinting

Structural stability of DNA origami nanostructures in organic solvents.

DNA origami nanostructures have attracted significant attention as an innovative tool in a variety of research areas, spanning from nanophotonics to bottom-up nanofabrication. However, the use of DNA origami is often restricted by their rather limited structural stability in application-specific conditions. The structural integrity of DNA origami is known to be superstructure-dependent, and the integrity is influenced by various external factors, for example cation concentration, temperature, and presence of nucleases. Given the necessity to functionalize DNA origami also with non-water-soluble entities, it is important to acquire knowledge of the structural stability of DNA origami in various organic solvents. Therefore, we herein systematically investigate the post-folding DNA origami stability in a variety of polar, water-miscible solvents, including acetone, ethanol, DMF, and DMSO. Our results suggest that the structural integrity of DNA origami in organic solvents is both superstructure-dependent and dependent on the properties of the organic solvent. In addition, DNA origami are generally more resistant to added organic solvents in folding buffer compared to that in deionized water. DNA origami stability can be maintained in up to 25-40% DMF or DMSO and up to 70-90% acetone or ethanol, with the highest overall stability observed in acetone. By rationally selecting both the DNA origami design and the solvent, the DNA origami stability can be maintained in high concentrations of organic solvents, which paves the way for more extensive use of non-water-soluble compounds for DNA origami functionalization and complexation.

Advances in using adaptive laboratory evolution technology for engineering of photosynthetic cyanobacteria

Cyanobacteria are the only prokaryotes capable of oxygenic photosynthesis, which have potential to serve as "autotrophic cell factories". However, the synthesis of biofuels and chemicals using cyanobacteria as chassis are suffered from poor stress tolerance and low yield, resulting in low economic feasibility for industrial production. Thus, it's urgent to construct new cyanobacterial chassis by means of synthetic biology. In recent years, adaptive laboratory evolution (ALE) has made great achievements in chassis engineering, including optimizing growth rate, increasing tolerance, enhancing substrate utilization and increasing product yield. ALE has also made some progress in improving the tolerance of cyanobacteria to high light intensity, heavy metal ions, high concentrations of salt and organic solvents. However, the engineering efficiency of ALE strategy in cyanobacteria is generally low, and the molecular mechanisms underpinning the tolerance to various stresses have not been fully elucidated. To this end, this review summarizes the ALE-associated technical strategies and their applications in cyanobacteria chassis engineering, following by discussing how to construct larger ALE mutation library, increase mutation frequency of strains and shorten evolution time. Moreover, exploration of the construction principles and strategies for constructing multi-stress tolerant cyanobacteria, and efficient analysis the mutant libraries of evolved strains as well as construction of strains with high yield and strong robustness are discussed, with the aim to facilitate the engineering of cyanobacteria chassis and the application of engineered cyanobacteria in the future.

Stimuli-responsive aggregation-induced emission of molecular probes by electrostatic and hydrophobic interactions: Effect of organic solvent content and application for probing of alkaline phosphatase activity

We suggest that aggregation-induced emission (AIE) molecular probes with single charged/reactive group can exist in the formation of nanostructures but not monomers at extremely low organic solvent content. The nanoaggregates show good dispersivity and emit week emission. Stimuli-responsive assembly of nanoaggregates by electrostatic interactions can turn on the fluorescence, facilitating the design of biosensors with single-charged molecular probes as the AIE fluorogens. To prove the concept, tetraphenylethene-substituted pyridinium salt (TPE-Py) was used as the AIE fluorogen for probing of alkaline phosphatase (ALP) activity with pyrophosphate ion (PPi) as the enzyme substrate. The dynamic light scattering and transmission electron microscope experiments demonstrated that TPE-Py probes existed in aqueous solution at nanometer size and morphology. Stimuli such as the negatively charged PPi, citrate, ATP, ADP, NADP and DNA could trigger the aggregation of the positively charged TPE-Py nanoparticles, thus enhancing the fluorescence via AIE effect. ALP-enzymatic hydrolysis of PPi into two phosphate ions (Pi) limited the aggregation of TPE-Py nanoparticles. The strategy was used for the assay of ALP with a low detection limit (1 U/L) and wide linear range (1–200 U/L). We also investigated the effect of organic solvent content on the AIE process and found that high concentration of organic solvent can prevent the hydrophobic interaction between AIE molecules but show no essential influence on the electrostatic interaction-mediated assembly. The work should be evaluable for understanding AIE phenomenon and developing novel, simple and sensitive biosensors using a molecular probe with single charged/reactive group as the signal reporter.

Novel Siloxane Derivatives as Membrane Precursors for Lactate Oxidase Immobilization.

We report new enzyme-containing siloxane membranes for biosensor elaboration. Lactate oxidase immobilization from water-organic mixtures with a high concentration of organic solvent (90%) leads to advanced lactate biosensors. The use of the new alkoxysilane monomers-(3-aminopropyl)trimethoxysilane (APTMS) and trimethoxy[3-(methylamino)propyl]silane (MAPS)-as the base for enzyme-containing membrane construction resulted in a biosensor with up to a two times higher sensitivity (0.5 A·M-1·cm-2) compared to the biosensor based on (3-aminopropyl)triethoxysilane (APTES) we reported previously. The validity of the elaborated lactate biosensor for blood serum analysis was shown using standard human serum samples. The developed lactate biosensors were validated through analysis of human blood serum.

Preparation of poly(N-vinylpyrrolidone-co-pentaerythritol triacrylate) monolithic column for hydrophilic interaction chromatography.

A method for the preparation of poly(N-vinylpyrrolidone-co-pentaerythritol triacrylate copolymerization)-based monolithic capillary column was reported for the separation of polar small molecular weight compounds with nano-liquid chromatography in hydrophilic interaction chromatography mode. The monolithic columns were prepared by in situ copolymerization of N-vinylpyrrolidone and a cross-linker pentaerythritol triacrylate in a binary porogenic agent consisting of methanol and water. The composition of the polymerization solution was systematically optimized in terms of column permeability, theoretical plate number, asymmetric factor, and retention factor. A typical hydrophilic chromatography retention mechanism was observed with a mobile phase composed of a high content of organic solvent. The preparation method is simple and robust, the precursor N-vinylpyrrolidone is chemically stable, cheap, and easily available. The N-vinylpyrrolidone-based hydrophilic interaction chromatography stationary phase displays satisfactory separation selectivity for a range of polar test analytes, including benzoic acid derivatives, nucleosides, and phenols.

A bio-friendly biotin-coupled and azide-functionalized naphthalimide for real-time endogenous hydrogen sulfide analysis in living cells

Hydrogen sulfide (H2S) is involved in various biological processes. Thereby, abnormal levels of H2S are reported to be related to various human diseases including cancer. Currently, many fluorescent probes are pioneered to detect H2S by taking advantages of naphthalimides’ unique internal charge transfer (ICT) property. However, most probes often require a high content of organic solvents or surfactants, and are limited to the analysis of exogenous H2S treated externally in live cell studies, and have difficulties in analyzing endogenous H2S, thus limiting their practical use. In this study, we developed a bio-friendly biotin-coupled and azide-functionalized naphthalimide (1) as a fluorescent probe enabling real-time analysis of H2S in living system. Probe was able to provide a fluorescence at 545 nm via H2S-mediated azide reduction selectively without interference by biologically abundant constituents and pH effects. In a biological study using A549 cells, probe readily penetrated living cells without cytotoxicity, and unreacted probes showed almost no fluorescence, enabling real-time detection of H2S in living cells without requiring separate washing process. More importantly, under stimulation with various H2S inducers and inhibitors, probe was able to provide an effective fluorescence response against fluctuations in endogenous H2S, a key requirement for H2S studies. Probe 1 can be applied as a useful chemical tool and enables the analysis of H2S and the study of H2S-related cell functions in a variety of environments.

Self-assembly of Aeropyrum pernix bacilliform virus 1 (APBV1) major capsid protein and its application as building blocks for nanomaterials.

Virus capsid proteins have various applications in diverse fields such as biotechnology, electronics, and medicine. In this study, the major capsid protein of bacilliform clavavitus APBV1, which infects the hyperthermophilic archaeon Aeropyrum pernix, was successfully expressed in Escherichia coli. The gene product was expressed as a histidine-tagged protein in E. coli and purified to homogeneity using single-step nickel affinity chromatography. The purified recombinant protein self-assembled to form bacilliform virus-like particles at room temperature. The particles exhibited tolerance against high concentrations of organic solvents and protein denaturants. In addition, we succeeded in fabricating functional nanoparticles with amine functional groups on the surface of ORF6-81 nanoparticles. These robust protein nanoparticles can potentially be used as a scaffold in nanotechnological applications.

Degradation and Detoxification of Chlorophenols with Different Structure by LAC-4 Laccase Purified from White-Rot Fungus Ganoderma lucidum.

A laccase named LAC-4 was purified from Ganoderma lucidum. Firstly, the enzymatic properties of purified LAC-4 laccase, and the degradation of three chlorophenol pollutants 2,6-dichlorophenol (2,6-DCP), 2,3,6-trichlorophenol (2,3,6-TCP) and 3-chlorophenol (3-CP) by LAC-4 were systematically studied. LAC-4 had a strong ability for 2,6-DCP and 2,3,6-TCP degradation. The degradation ability of LAC-4 to 3-CP was significantly lower than that of 2,6-DCP and 2,3,6-TCP. LAC-4 also had a good degradation effect on the chlorophenol mixture (2,6-DCP + 2,3,6-TCP). The results of kinetics of degradation of chlorophenols by LAC-4 suggested that the affinity of LAC-4 for 2,6-DCP was higher than 2,3,6-TCP. The catalytic efficiency and the catalytic rate of LAC-4 on 2,6-DCP were also significantly higher than 2,3,6-TCP. During degradation of 2,6-DCP and 2,3,6-TCP, LAC-4 had a strong tolerance for high concentrations of different metal salts (such as MnSO4, ZnSO4, Na2SO4, MgSO4, CuSO4, K2SO4) and organic solvents (such as ethylene glycol and glycerol). Next, detoxification of chlorophenols by LAC-4 was also systematically explored. LAC-4 treatment had a strong detoxification ability and a good detoxification effect on the phytotoxicity of individual chlorophenols (2,6-DCP, 2,3,6-TCP) and chlorophenol mixtures (2,6-DCP + 2,3,6-TCP). The phytotoxicities of 2,6-DCP, 2,3,6-TCP and chlorophenol mixtures (2,6-DCP + 2,3,6-TCP) treated with LAC-4 were considerably reduced or eliminated. Finally, we focused on the degradation mechanisms and pathways of 2,6-DCP and 2,3,6-TCP degradation by LAC-4. The putative transformation pathway of 2,6-DCP and 2,3,6-TCP catalyzed by laccase was revealed for the first time. The free radicals formed by LAC-4 oxidation of 2,6-DCP and 2,3,6-TCP produced dimers through polymerization. LAC-4 catalyzed the polymerization of 2,6-DCP and 2,3,6-TCP, forming dimer products. LAC-4 catalyzed 2,6-DCP into two main products: 2,6-dichloro-4-(2,6-dichlorophenoxy) phenol and 3,3′,5,5′-tetrachloro-4,4′-dihydroxybiphenyl. LAC-4 catalyzed 2,3,6-TCP into two main products: 2,3,6-trichloro-4-(2,3,6-trichlorophenoxy) phenol and 2,2′,3,3′,5,5′-hexachloro-[1,1′-biphenyl]-4,4′-diol.

Creation of Cross-Linked Crystals With Intermolecular Disulfide Bonds Connecting Symmetry-Related Molecules Allows Retention of Tertiary Structure in Different Solvent Conditions.

Protein crystals are generally fragile and sensitive to subtle changes such as pH, ionic strength, and/or temperature in their crystallization mother liquor. Here, using T4 phage lysozyme as a model protein, the three-dimensional rigidification of protein crystals was conducted by introducing disulfide cross-links between neighboring molecules in the crystal. The effect of cross-linking on the stability of the crystals was evaluated by microscopic observation and X-ray diffraction. When soaking the obtained cross-linked crystals into a precipitant-free solution, the crystals held their shape without dissolution and diffracted to approximately 1.1 Å resolution, comparable to that of the non-cross-linked crystals. Such cross-linked crystals maintained their diffraction even when immersed in other solutions with pH values from 4 to 10, indicating that the disulfide cross-linking made the packing contacts enforced and resulted in some mechanical strength in response to changes in the preservation conditions. Furthermore, the cross-linked crystals gained stability to permit soaking into solutions containing high concentrations of organic solvents. The results suggest the possibility of obtaining protein crystals for effective drug screening by introducing appropriate cross-linked disulfide bonds.

Thermostable lipases and their dynamics of improved enzymatic properties.

Thermal stability is one of the most desirable characteristics in the search for novel lipases. The search for thermophilic microorganisms for synthesising functional enzyme biocatalysts with the ability to withstand high temperature, and capacity to maintain their native state in extreme conditions opens up new opportunities for their biotechnological applications. Thermophilic organisms are one of the most favoured organisms, whose distinctive characteristics are extremely related to their cellular constituent particularly biologically active proteins. Modifications on the enzyme structure are critical in optimizing the stability of enzyme to thermophilic conditions. Thermostable lipases are one of the most favourable enzymes used in food industries, pharmaceutical field, and actively been studied as potential biocatalyst in biodiesel production and other biotechnology application. Particularly, there is a trade-off between the use of enzymes in high concentration of organic solvents and product generation. Enhancement of the enzyme stability needs to be achieved for them to maintain their enzymatic activity regardless the environment. Various approaches on protein modification applied since decades ago conveyed a better understanding on how to improve the enzymatic properties in thermophilic bacteria. In fact, preliminary approach using advanced computational analysis is practically conducted before any modification is being performed experimentally. Apart from that, isolation of novel extremozymes from various microorganisms are offering great frontier in explaining the crucial native interaction within the molecules which could help in protein engineering. In this review, the thermostability prospect of lipases and the utility of protein engineering insights into achieving functional industrial usefulness at their high temperature habitat are highlighted. Similarly, the underlying thermodynamic and structural basis that defines the forces that stabilize these thermostable lipase is discussed. KEY POINTS: • The dynamics of lipases contributes to their non-covalent interactions and structural stability. • Thermostability can be enhanced by well-established genetic tools for improved kinetic efficiency. • Molecular dynamics greatly provides structure-function insights on thermodynamics of lipase.

Solvent induced conformational changes for the altered activity of laccase: A molecular dynamics study

The growing demands of solvent-based industries like paint, pharmaceutical, petrochemical, paper and pulp, etc., have directly increased the release of effluents that are rich in hazardous aromatic compounds in the environment. A sustainable biotechnological approach utilizing laccases as biocatalyst enable in biodegradation of these aromatic toxin-rich effluents. However, this enzymatic process is ineffective as laccases lose their stability and catalytic activity at high organic solvent concentrations. In this study, molecular dynamic simulations of a novel solvent tolerant laccase, DLac from Cerrena sp. RSD1 was performed to explore the molecular-level understanding of DLac in 30%(v/v) acetone and acetonitrile. Solvent-induced conformational changes were analyzed via protein structure network, which was illustrated with respect to cliques and communities. In the presence of acetonitrile, the cliques around the active site and substrate-binding site were disjoined, thus the communities lost their network integrity. Whereas with acetone, the community near the substrate-binding site gained new residues and formed a rigidified network that corresponded to enhanced DLac’s activity. Moreover, prominent solvent binding sites were speculated, which can be probable mutation targets to further improve solvent tolerance and catalytic activity. The molecular basis behind solvent induced catalytic activity will further aid in engineering laccase for its industrial application.

Effective separation of water-DMSO through solvent resistant membrane distillation (SR-MD)

The treatment of organic waste or wastewater with high organic solvent content has been challenging in industries as it cannot be done effectively using conventional wastewater treatment technologies such as biodegradation and advanced oxidation process. Solvent resistant membrane distillation (SR-MD) was proposed as an energy-efficient alternative to treat these waste streams but its application is hampered by the lack of solvent-resistant membranes, and there is a research gap in studying the feeds with water-solvent mixtures. In this work, ceramic tubular membranes with different pore sizes and structures were molecularly grafted with 1H,1H,2H,2H-perfluorodecyltriethoxysilane to obtain hydrophobic ceramic membranes for SR-MD. The modified membranes exhibited excellent hydrophobicity and solvent resistant properties, and they were tested for SR-MD performance with a wide range of dimethyl sulfoxide (DMSO) feed concentrations, from 3.5 to 85 wt%. The membranes exhibited a high DMSO rejection of >98% and the separation factor of >170, with permeation flux >4.4 kg m−2 h−1 when the DMSO concentration in feed was below 65 wt%. The separation performance was found strongly dependent on the evaporation step and the vapour-liquid equilibrium near the interface. The DMSO rejection was also comparable to pervaporation while the permeation flux was much higher at the feed concentration of 50 wt%. This study establishes the strategy of using SR-MD as a promising membrane process in treating complex industrial wastes with high organic solvent content.

Stabilization and improved properties of Salipaludibacillus agaradhaerens alkaline protease by immobilization onto double mesoporous core-shell nanospheres

In this study, serine alkaline protease from halotolerant alkaliphilic Salipaludibacillus agaradhaerens strain AK-R was purified and immobilized onto double mesoporous core-shell silica (DMCSS) nanospheres. Covalent immobilization of AK-R protease onto activated DMCSS-NH2 nanospheres was more efficient than physical adsorption and was applied in further studies. DMCSS-NH2 nanospheres showed high loading capacity of 103.8 μg protein/mg nanospheres. Relative to free AK-R protease, the immobilized enzyme exhibited shifts in the optimal temperature and pH from 60 to 65 °C and pH 10.0 to 10.5, respectively. While the soluble enzyme retained 47.2% and 9.1% of its activity after treatment for 1 h at 50 and 60 °C, the immobilized protease maintained 87.7% and 48.3%, respectively. After treatment for 2 h at pH 5 and 13, the immobilized protease maintained 73.6% and 53.4% of its activity, whereas the soluble enzyme retained 32.9% and 1.4%, respectively. Furthermore, the immobilized AK-R protease showed significant improvement of enzyme stability in high concentration of NaCl, organic solvents, surfactants, and commercial detergents. In addition, the immobilized protease exhibited a very good operational stability, retaining 79.8% of its activity after ten cycles. The results clearly suggest that the developed immobilized protease system is a promising nanobiocatalyst for various protease applications.

Development of a structure-analysis pipeline using multiple-solvent crystal structures of barrier-to-autointegration factor.

The multiple-solvent crystal structure (MSCS) approach uses high concentrations of organic solvents to characterize the interactions and effects of solvents on proteins. Here, the method has been further developed and an MSCS data-handling pipeline is presented that uses the Detection of Related Solvent Positions (DRoP) program to improve data quality. DRoP is used to selectively model conserved water molecules, so that an advanced stage of structural refinement is reached quickly. This allows the placement of organic molecules more accurately and convergence on high-quality maps and structures. This pipeline was applied to the chromatin-associated protein barrier-to-autointegration factor (BAF), resulting in structural models with better than average statistics. DRoP and Phenix Structure Comparison were used to characterize the data sets and to identify a binding site that overlaps with the interaction site of BAF with emerin. The conserved water-mediated networks identified by DRoP suggested a mechanism by which water molecules are used to drive the binding of DNA. Normalized and differential B-factor analysis is shown to be a valuable tool to characterize the effects of specific solvents on defined regions of BAF. Specific solvents are identified that cause stabilization of functionally important regions of the protein. This work presents tools and a standardized approach for the analysis and comprehension of MSCS data sets.

Fungal mycelia functionalization with halloysite nanotubes for hyphal spreading and sorption behavior regulation: A new bio-ceramic hybrid for enhanced water treatment

Filamentous fungi are believed to remove a wide range of environmental xenobiotics due to their characteristically non-specific catabolic metabolisms. Nonetheless, irregular hyphal spreading can lead to clogging problems in treatment facilities and the dependence of pollutant bioavailability on hyphal surface features severely limits their applicability in water treatment. Here, we propose a scalable and facile methodology to structurally modify fungal hyphae, allowing for both the maximization of pollutant sorption and fungal pellet morphology self-regulation. Halloysite-doped mycelium architectures were efficiently constructed by dipping Aspergillus fumigatus pellets in halloysite nanotube-dispersed water. Ultrastructure analyses using scanning electron microscopy equipped with energy-dispersive X-ray spectroscopy revealed that the nanotubes were mainly attached to the outer surface of the pellets. Fungal viability and exoenzyme production were hardly affected by the halloysites. Notably, nanotube doping appeared to be extremely robust given that detachments rarely occurred even in high concentrations of organic solvents and salt. It was also demonstrated that the doped halloysites weakened hyphal growth-driven gelation, thus maintaining sphere-like pellet structures. The water treatment potential of the hybrid fungal mycelia was assessed through both cationic toxic organic/inorganic-contaminated water and real dye industry wastewater clean-ups. Aided by the mesoporous halloysite sites on their surface, the removal abilities of the hybrid structures were significantly enhanced. Moreover, inherent low sorption ability of HNT for heavy metals was found to be overcome by the aid of fungal mycelia. Finally, universal feature of the dipping-based doping way was confirmed by using different filamentous fungi. Given that traditional approaches to effectively implement fungus-based water treatment are based mostly on polymer-based immobilization techniques, our proposed approach provides a novel and effective alternative via simple doping of living fungi with environmentally-benign clays such as halloysite nanotubes.