High Concentrations Of Heavy Metals Research Articles

Penyisihan Kandungan Perak dalam Limbah Cair Pencucian Film Melalui Proses Biofiltrasi dengan Tanaman Eceng Gondok

Wastewater produced from the film washing process in photo studios generally has very high contents of heavy metals, such as silver (Ag). This situation can cause various health and environmental problems if it is not treated before disposal. Therefore, this research was aimed to reduce the silver content in the wastewater through biological processes. This study was conducted using a biofiltration process using water hyacinth plants. Film washing waste was first acclimatized into concentration of 2.5% and the initial silver content was measured. Afterwards, water hyacinth of 600, 900, 1200, and 1500 g, respectively, was planted into the wastewater. Waste samples were subsequently taken and analyzed every 2 days. The highest removal efficiency of 99.94% was yielded for 1500 g of plant. In this condition, the silver content in wastewater met the environmental quality standards.

Mucor thermorhizoides—A New Species from Post-mining Site in Sudety Mountains (Poland)

Mucor representatives are mostly rapidly growing cosmopolitan soil saprotrophs of early diverged Mucoromycotina subphylum. Although this is the most speciose genus within the group, some lineages are still understudied. In this study, new species of Mucor was isolated from the post-mining area in southwestern Poland, where soil chemical composition analysis revealed high concentration of hydrocarbons and heavy metals. Phylogenetic analysis based on multigene phylogeny showed that the new isolate clusters distinctly from other Mucor species as a sister group to Mucor microsporus. New species Mucor thermorhizoides Abramczyk (Mucorales, Mucoromycota) is characterized by the extensive rhizoid production in elevated temperatures and formation of two layers of sporangiophores. It also significantly differs from M. microsporus in the shape of spores and the size of sporangia. M. thermorhizoides was shown to be able to grow in oligotrophic conditions at low temperatures. Together with M. microsporus they represent understudied and highly variable lineage of the Mucor genus.

Land-Use–Land Cover Changes in the Urban River’s Buffer Zone and Variability of Discharge, Water, and Sediment Quality—A Case of Urban Catchment of the Ngerengere River in Tanzania

The physical integrity of the Ngerengere River and its three tributaries drains within Morogoro Municipality were evaluated by assessing the variations in land-use–land cover (LULC) in the river’s buffer zone, the discharge, and the contamination of river water and sediment from nutrients and heavy metals. Integrated geospatial techniques were used to classify the LULC in the river’s buffer zone. In contrast, the velocity area method and monitoring data from the Wami-Ruvu Basin were used for the discharge measurements. Furthermore, atomic absorption spectrophotometry was used during the laboratory analysis to determine the level of nutrients and heavy metals in the water and river sediment across the 13 sampling locations. The LULC assessment in the river’s buffer during the sampling year of 2023 showed that bare land and built-up areas dominate the river’s buffer, with a coverage of 28% and 38% of the area distribution. The higher discharge across the sampling stations was in the upstream reaches at 3.73 m3/s and 2.36 m3/s at the confluences. The highest concentrations of heavy metals in the water for the dry and wet seasons were 0.09 ± 0.01, 0.25 ± 0.01, 0.03 ± 0.02, 0.73 ± 0.04, 4.07 ± 0.08, and 3.07 ± 0.04 mg/L, respectively, for Pb, Cr, Cd, Cu, Zn, and Ni. The order of magnitude of the heavy metal concentration in the sediments was Zn > Ni > Cr > Cu > Cd > Pb, while the highest NO2−, NO3−, NH3, and PO43− in the water and sediment were 2.05 ± 0.01, 0.394 ± 0.527 0.66 ± 0.05, and 0.63 ± 0.01 mg/L, and 2.64 ± 0.03, 0.63 ± 0.01, 2.36 ± 0.01, and 48.16 ± 0.01 mg/kg, respectively, across all sampling seasons. This study highlights the significant impact of urbanization on river integrity, revealing elevated levels of heavy metal contamination in both water and sediment, the variability of discharge, and alterations in the LULC in the rivers’ buffer. This study recommends the continuous monitoring of the river water quality and quantity of the urban rivers, and the overall land-use plans for conserving river ecosystems.

Remediation of Pb-, Zn-, Cu-, and Cd-Contaminated Soil in a Lead–Zinc Mining Area by Co-Cropping Ilex cornuta and Epipremnum aureum with Illite Application

Phytoremediation is considered an effective strategy for remediation of heavy-metal-contaminated soil in mining areas. However, single-species plants cannot reach the highest potential for uptake of heavy metals due to inhibition of their growth by high concentrations of heavy metals in the soil. Therefore, this study has explored the effects of illite application and two plant species’ co-cropping on soil quality, plant growth, and heavy metal transformation in a soil–plant system. The results reveal that the addition of 1% (mass fraction) of illite significantly enhances soil pH. The co-cropping of Ilex cornuta and Epipremnum aureum is beneficial for improving the organic matter content of the soil. The contents of EDTA-extractable Pb, Zn, and Cu were significantly reduced by 29.8–32.5%, 1.85–5.72%, and 30.0–32.9%, respectively, compared to the control. The co-cropping of Ilex cornuta and Epipremnum aureum promoted enrichment effects of Epipremnum aureum on Pb and Ilex cornuta on Cd (p < 0.05). The co-cropping pattern lowered the biomass of Ilex cornuta and Epipremnum aureum; however, co-cropping of Ilex cornuta and Epipremnum aureum promoted the elimination of Pb, Zn, Cu, and Cd from the soil at 13.0–75.8%, 11.1–38.2%, 8.39–88.4%, and 27.8–72.5%, respectively. It is concluded that illite application combined with co-cropping of Ilex cornuta and Epipremnum aureum is highly effective for the elimination of Pb, Zn, Cu, and Cd from contaminated soil. This study provides a theoretical basis and pathway for the restoration of heavy-metal-contaminated soil in mining with the application of bentonite combined with phytoremediation.

#3096 Exploratory population-based screening of kidney function and heavy metal water source levels in a highly incident CKDu area in Guatemala

Abstract Background and Aims Chronic kidney disease of unknown etiology (CKDu) has exponentially increased in the rural areas of the Pacific Coast in Central America. A multifactorial etiology has been postulated including exposure to environmental nephrotoxins such as heavy metals. The Pacific Coast of Guatemala has a volcanic topography with a high content of heavy metals, and the rural communities use ground water as their regular drinking consumption. Since the highest age group affected by CKDu are young adults, we postulated an exposure during childhood impacting later in life. We aim to identify changes in kidney function in children and adolescent healthy population from a highly incident CKDu area, and the heavy metal levels from water sources as a hypothesis generation exploratory study. Method We performed a population-based cross-sectional study of children and adolescents (below 17 y/o) from La Democracia municipality that were randomly chosen using Epidat software 3.1 from 10 different local schools from March 2019 to March 2020. The study was approved by external ethics board committee external-independent research ethics board committee. Subjects were excluded if they had known diagnosis of CKD, kidney replacement therapy or hypertension. The screening was performed in three different steps including a background assessment questionnaire, clinical assessment, and biochemical testing including creatinine from blood drop using StatSensor XpressTM to calculate estimated glomerular filtration rate (eGFR), urine dipstick, urinary creatinine, and protein. We measured arsenic (33As), cadmium (48Cd), mercury (80Hg), and lead (82Pb) in 21 water wells around the 10 screened schools, while only arsenic (33As), cadmium (48Cd) and mercury (80Hg) were measured in the urine of a small subset of the samples (data not shown in the results). Results A total of 508 randomly selected subjects’ and parents’ consent for screening but only 506 completed assessment. The median age was 14 y/o (IQR 11-17) 50% being female, with a close to 30% of the sample having obesity. The blood pressure was abnormal in 28% of the sample and at least 30% of them had an abnormal urine dipstick. The overall eGFR was 98, being the 25th%tile close to 83 ml/min/1.73 m2 BSA (Tables 1 and 2). Water sources showed higher than recommended levels of all heavy metals tested. Interestingly, the schools “Campiña” showed high levels of Arsenic and Cadmium in water sources, being the subjects tested coincidentally among the lowest eGFR of sample. Conclusion CKDu is an entity devastating low-resourced communities with young adults being the most affected. A likelihood for a link of early exposure needs to be further explored. Addressing the postulated hypothesis are key to implement preventive strategies, including screening earlier in life such as pediatric population.

Development and optimization of a polysilicon-aluminum alkali mineral-enhanced biochar composite for effective heavy metal removal in acidic environments

While traditional biochar demonstrates promising performance in diverse settings, its efficacy may be constrained under specific conditions of high acidity and heavy metal concentrations. In this study, researchers developed a new polysilicon-aluminum alkali mineral-enhanced biochar composite material, GBMSs (green biochar-metakaolin-sodium silicate), by pyrolyzing fibers from dragon fruit peels and blending them with metakaolin and sodium silicate. Using a response surface methodology, this environmentally friendly composite material was optimized for removing copper and zinc contaminants across a range of initial pH levels from 2 to 6. Experimental findings indicated that the adsorption capacity of GBMSs for copper and zinc was significantly enhanced, ranging from 1.5 to 4 times greater compared to pure biochar or biochar mixed solely with a silicon-aluminum mineral. Various analytical techniques including scanning electron microscopy, X-ray diffraction (XRD), and Fourier transform infrared (FTIR) spectroscopy were utilized to examine the influence of poly-silica-aluminum alkali minerals (GBMSs) on biochar composites. The findings revealed an upsurge in surface binding locations and oxygen-related functional groups because of integrating GBMSs. This augmentation of electronegative features on the biochar surface was credited to the development of stabilizing silica-aluminum connections, ultimately boosting its adsorption effectiveness in acidic surroundings. By applying Langmuir and Freundlich models, it was deduced that the adsorption of GBMSs adheres to a multilayer uniform adsorption mechanism, with surface ion interchange and complexation restricting the adsorption capability. This research highlights the potential of clay mineral-altered biochar in efficiently dealing with intricate environmental contamination.

Artisanal and Small-Scale Gold Mining Impact on Soil and Agriculture: Evidence from Upper Denkyira East Municipality, Ghana

The gold mining industry in Ghana has made a substantial contribution to the country's economic growth by generating diverse employment opportunities, both directly and indirectly, in mining communities. This has the potential to mitigate poverty and improve the quality of life for individuals and households in rural areas, where climate change is having a disproportionate impact on small-scale farmers. Nevertheless, it is crucial to recognize that this sector has also resulted in detrimental environmental impacts. A total 150 key informants in Upper Denkyira East Municipality, comprising representatives from the Environmental Protection Agency, the Forestry Commission, the Mineral Commission, and other stakeholders, were interviewed using standardize questionnaire to ascertain the impact of mining on the soil, agriculture and the environment. The study also employed inductively coupled plasma to assess the concentration of heavy metals in soils at a small-scale mining site. The soil analyses indicated high concentrations of heavy metals, such as mercury, arsenic, nickel, zinc, and iron. The Weighted Average Index, which was used to assess the impact of mining, revealed that communities face challenges such as deforestation, low crop yields, water pollution, land tenure issues, and a high cost of living. The study's analyses of measures to address small scale mining challenges revealed that alternative livelihood, law enforcement, training and support, and access to mining concessions were perceived as suitable for addressing artisanal and small scale mining. The study concluded that stricter mining regulations, promoting sustainable mining practices, and providing comprehensive training to miners on environmental protection and land reclamation can help mitigate the negative impacts of artisanal and small-scale mining. Additionally, supporting alternative means of livelihood for mining communities, such as agriculture or eco-tourism, can reduce reliance on mining and promote sustainable development.

Heavy metals and potential health risk assessment of Lactuca sativa and Daucus carrota from soil treated with organic manures and chemical fertilizer

The large-scale production of food crops with heavy application of chemical fertilizers in the effort to meet the astronomical increase in food demands may be counterproductive to the goal of food security. This study investigated the effect of different soil treatments on the levels of heavy metals (Cr, Cu, Fe, Ni, Pb, and Zn) in two types of vegetables Lactuca sativa (lettuce) and Daucus carrota (carrot). The potential carcinogenic and non-carcinogenic health risks from their consumption were also evaluated. Planting experiment was set up in a randomized block design, with different soil treatments of soil + cow dung (CD), soil + sewage sludge (SS), soil + chemical fertilizer (nitrogen-phosphorus-potassium (NPK)), and untreated soil (UNTRD). The vegetables were harvested at maturity, washed with distilled water, and subjected to an acid digestion process before the levels of heavy metals were measured by inductively coupled plasma spectrometry (ICP-MS). The mean concentrations of the metals in the vegetables across all treatments were below the maximum permissible limits. The pattern of heavy metal accumulation by the vegetables suggested that the lettuce from SS treatment accumulated higher concentrations of heavy metals like Cr (0.20 mg/kg), Cu (3.91 mg/kg), Ni (0.33 mg/kg), and Zn (20.44 mg/kg) than carrot, with highest concentrations of Fe (90.89 mg/kg) and Pb (0.16 mg/kg) recorded in lettuce from NPK treatment. The bioaccumulation factor (BAF) showed that lettuce, a leafy vegetable, has bioaccumulated more heavy metals than carrot, a root vegetable. The BAF was generally below the threshold value of 1 in both vegetables, except in lettuce from NPK and CD treatments and carrot from NPK treatments, with BAF values of 1.6, 1.69, and 1.39, respectively. The cancer risk assessment factors were well below the unacceptable maximum range of 10−4 suggesting that consuming these vegetables might not expose an individual to potential risk of cancer development. The hazard quotient estimations were below the threshold values of 1 for all heavy metals; however, the hazard index (HI) values of 1.27 and 1.58 for lettuce from NPK and SS treatments indicate a potential non-carcinogenic health risk to consumers from intake of all the heavy metals.

Actinomycetes as a Possible Source of Bioremediation of Heavy Metal Cadmium from Contaminated Soil

Annually, a significant volume of chemicals, encompassing fertilizers and pesticides, is administered to agricultural soils. Using pesticides and fertilizers, agricultural practices contribute to heavy metal Cadmium (Cd), Copper (Cu), Lead (Pb) and Zinc (Zn) pollution. Heavy metals and pesticides are high at the peak of ecological contaminants, presence of this has introduced grave risks to the health of the population and agronomics. Among heavy metals, cadmium (Cd) is recognized for its high mobility in various environmental settings. Cd has a deleterious effect on plant phenotypic, cytotoxicity (e.g., lowering chlorophyll concentration and limiting photosynthetic effectiveness), and metabolic activities (e.g., chlorosis and necrosis). Microbial bioremediation by using microorganisms is one of the secure, pure, cost operative and eco-friendly technology for decontaminating polluting sites as compared to physical and chemical techniques. Among microbes, Actinobacteria hold a paramount position, serving as key players in numerous biological processes, utilize toxins as carbon source and turn into high concentrations of pesticides, chemical complexes and heavy metals into commercially viable antibiotics, enzymes, proteins, and plant growth promoting hormones. This study is an effort to explore the potent cadmium resistance actinomycetes to reduce cadmium levels to enhance degradation. For this purpose, 53 actinomycetes strains were tested for heavy metal resistance and tolerance to Cadmium against different concentrations. After secondary screening Four potent isolate have the potential to grow at 1000 mg/L concentration of Cadmium in the medium. When they are able to grow on heavy metal containing media it could be beneficial for reduction and elimination of toxic metals from contaminated environment. When it comes to achieving a suitable level of metal tolerance, this potent powerful actinomycetes strain Streptomyces pactum have been identified to be promising.

Geophysical and physicochemical assessment of groundwater and the implication on the public health in rural and semi-urban areas of Northern Nigeria

Groundwater resource plays a central role in every sector of life globally. Unfortunately, the roles of groundwater are often unappreciated in many parts of the world, especially in developing nations. The paper applied a combined geo-electrical method and hydrochemical analysis alongside physical surveys to investigate aquifer promising zones, the quality and the source of water supply in the selected regions. The geo-electric resistivity data were used to select the most aquifer-promising zone for groundwater development with a key interest in groundwater potential and aquifer overburden protective capacity overlying the water-bearing unit. Seventeen (17) vertical electrical sounding (VES) acquired in four regions reveals that the regional weathered/fractured unit which constitutes the aquifer unity extends from 13.4 m to 41.3 m in depth with the subsurface resistivity value varying between 53 Ωm–1013 Ωm in terms of resistivity values. The overburdened thickness (protective soil layers) stretches from 2.5 m to 13 m with a resistive layer of resistivity values ranging from 111 Ωm to 2877 Ωm, which could provide high aquifer protective cover for the regional groundwater systems. The computed aquifer transmissivity and hydraulic conductivity range from 0.54 m2/h\\documentclass[12pt]{minimal} \\usepackage{amsmath} \\usepackage{wasysym} \\usepackage{amsfonts} \\usepackage{amssymb} \\usepackage{amsbsy} \\usepackage{mathrsfs} \\usepackage{upgreek} \\setlength{\\oddsidemargin}{-69pt} \\begin{document}$${m}^{2}/h$$\\end{document}–15.85 m2/h\\documentclass[12pt]{minimal} \\usepackage{amsmath} \\usepackage{wasysym} \\usepackage{amsfonts} \\usepackage{amssymb} \\usepackage{amsbsy} \\usepackage{mathrsfs} \\usepackage{upgreek} \\setlength{\\oddsidemargin}{-69pt} \\begin{document}$${m}^{2}/h$$\\end{document}, and 0.95 m/day–9.19 m/day, respectively. The estimated average longitudinal conductance (0.2 moh) reveals that the regional groundwater systems are moderately protective against surface contaminants. In addition, the physicochemical water analysis was examined, which exposes the level of heavy metals (HMs) compositions in the regional groundwater systems and the possible public health risks compared to WHO permissible drinking water limits. The sample water from the Rivers had the highest concentration of HMs (0.089 mg/I–2.012 mg/l), followed by the hand-dug wells (HWDs) (0.033 mg/l–1.555 mg/l) and the lowest in the borehole (0.011 mg/l–0.511 mg/l). In contrast, the borehole water sample shows a moderation where the HMs presence falls within the WHO standard for drinking water. The outcomes of the study show that 63% of the investigated region consumed water with a high concentration of HMs above the WHO permissible standard allowance for drinking water, while only 37% took water that falls within the WHO permissible standard. In conclusion, the study showed significant impacts of anthropogenic activities on the regional water quality, which provides vital information about the regional groundwater systems and the quality of water supply for adequate groundwater development and sustainability.

Influencing Factors, Risk Assessment, and Source Identification of Heavy Metals in Purple Soil in the Eastern Region of Guang’an City, Sichuan Province, China

Soil heavy metal contamination poses a significant threat to both environmental health and ecological safety. To investigate the influencing factors, ecological hazards, and sources analysis of heavy metals in purple soil, 27 sets of soil samples were collected from varying genetic horizons within Guang’an City, and the contents of As, Cd, Cu, Cr, Hg, Ni, Pb, and Zn were analyzed. The results indicated higher concentrations of heavy metals in soil A horizon, compared to that of C horizon. The relevance analysis indicated that the soil’s heavy metals were strongly correlated with the soil’s physicochemical properties. The enrichment factor, pollution load index, and potential risk index highlighted slightly to severely polluted levels of soil Cd and Hg, which significantly contribute to the ecological hazards posed by soil heavy metals. The potential source of heavy metals analyzed using the APCS-MLR model identified both anthropogenic inputs and natural sources as primary contributors to heavy metal presence in soils. The Cu, Cr, Ni, Pb, and Zn contents in the samples from different genetic horizons were chiefly influenced by natural sources, such as soil matrix erosion and weathering, while the concentrations of Cd and Hg were largely affected by anthropogenic activities, specifically coal combustion and agriculture. Conversely, the As content was found to be influenced by a combination of both factors. Anthropogenic activities greatly impacted soil heavy metals at various depths within the study area, thereby underscoring the importance of monitoring these heavy metals. The findings gained from this research can give a scientific basis for the potential utilization of purple soil.

Implications of Heavy Metal Accumulation in Fish Feed, Water, Sediment, and Different Fish Species in a Polyculture System.

Heavy metal bioaccumulation in organisms is primarily a result of dietary uptake. The current study examines the concentrations of heavy metals (Pb, Cd, Cr, and Cu) in fish feed, water, sediment, and three fish species (Catla catla, Labeo rohita, and Cyprinus carpio) from different feeding zones in a polyculture pond system. Furthermore, associated human health risks were also evaluated. The fish samples (n = 25 for each species) were collected from 10 different fish ponds in the Kohat district, Pakistan. Heavy metals were determined using an atomic absorption spectrometer. Results revealed higher concentrations of heavy metals in sediment, followed by water. However, the concentration of heavy metals in fish feed was lower than the standard limits. In the case of fish, the bottom feeder (C. carpio) notably exhibited higher (P < 0.05) levels of heavy metals than the column feeder (L. rohita) and surface feeder (C. catla) fish. Moreover, in the liver of all fish species, the bioaccumulation of heavy metals was higher, followed by the gills. Principal component analysis (PCA) demonstrated a strong correlation of heavy metals in C. carpio gills, flesh, feed, and pond water, while the heavy metals in the liver correlated with the detected metals in sediment. The human health risk analysis shows that bottom feeder fish had higher estimated daily intake (EDI), target hazard quotient (THQ), and hazard index (HI) values (> 1). Consequently, the exposed population may experience adverse health effects. The findings of this study suggest that the bottom feeder (C. carpio) bioaccumulates a higher concentration of heavy metals than column (L. rohita) and surface feeder (C. catla) in the polyculture system.

Co-hydrothermal carbonization as a potential method of utilising digested sludge and screenings from wastewater treatment plants towards energy application

Anaerobic digestion is one of the most recommended methods for utilising sewage sludge produced by wastewater treatment plants. However, the increasing amount of micropollutants in digested sludge can significantly limit its future utilisation. Recent studies suggests that the hydrothermal carbonization process can be used as a complementary method for sludge management, due to the improved quality of solid products - hydrochar. Moreover, this allows for the possibility of reusing liquid by-products in the anaerobic digestion process for biogas production. However, hydrochar generated from hydrothermal carbonization has a higher concentration of heavy metals and low energy value, which limits its use in agriculture and energy sectors. This study highlights a partial resolution to this problem, by mixing digested sludge with screenings in the co-hydrothermal carbonization process. The findings of this study show improvements in the properties of hydrochar including total solids measured according to ISO, inorganic fractions determined by inductively coupled plasma optical emission spectrometry and higher calorific values measured by the calorimetric bomb. Biomethane potential tests were conducted on liquid by-products. The results showed an average increase in biomethane potential from liquids obtained from co-hydrothermal carbonization compared to liquids from hydrothermal carbonization of digested sludge without screenings in series 1, 2 and 3 - up to 60 %, 40 % and 26 % for three different sludges with initial total solids content of 2.6 %, 12.5 % and 21.5 % w/w.

Assessment of water quality using entropy-weighted quality index, statistical methods and electrical resistivity tomography, Moti village, northern Pakistan

In this study, twenty-two water samples were collected from boreholes (BH), and streams to evaluate drinking water quality, its distribution, identification of contamination sources and apportionment for Moti village, northern Pakistan. An atomic absorption spectrophotometer (AAS) is utilized to determine the level of heavy metals in water such as arsenic (As), zinc (Zn), lead (Pb), copper (Cu), cadmium (Cd), manganese (Mn), and ferrous (Fe). Groundwater chemistry and its quantitative driving factors were further explored using multivariate statistical methods, Principal Component Analysis (PCA) and Positive Matrix Factorization (PMF) models. Finally, a total of eight electrical resistivity tomographs (ERTs) were acquired across i) the highly contaminated streams; ii) the villages far away from contaminated streams; and iii) across the freshwater stream. In the Moti village, the mean levels (mg/l) of heavy metals in water samples were 7.2465 (As), 0.4971 (Zn), 0.5056 (Pb), 0.0422 (Cu), 0.0279 (Cd), 0.1579 (Mn), and 0.9253 (Fe) that exceeded the permissible limit for drinking water (such as 0.010 for As and Pb, 3.0 for Zn, 0.003 for Cd and 0.3 for Fe) established by the World Health Organization (WHO, 2008). The average entropy weighted water quality index (EWQI) of 200, heavy metal pollution index (HPI) of 175, heavy metal evaluation index (HEI) of 1.6 values reveal inferior water quality in the study area. Human health risk assessment, consisting of hazard quotient (HQ) and hazard index (HI), exceeded the risk threshold (>1),indicating prevention of groundwater usage. Results obtained from the PCA and PMF models indicated anthropogenic sources (i.e. industrial and solid waste) responsible for the high concentration of heavy metals in the surface and groundwater. The ERTs imaged the subsurface down to about 40 m depths and show the least resistivity values (<11 Ωm) for subsurface layers that are highly contaminated. However, the ERTs revealed relatively high resistivity values for subsurface layers containing fresh or less contaminated water. Filtering and continuous monitoring of the quality of drinking water in the village are highly recommended.

A comparative study of acquisition of heavy metals and its toxicological effects in fish species: Siluriformes and Channa punctata

The heavy metals damage fish's physiologic and chemical composition, causing structural damage and hindering their activities. Lucknow's fisheries sector, accounting for 1% of GDP, faces contamination from heavy metals, pesticides, and fertilizers. This study examines heavy metal levels in Siluriformes and Channa punctata fish and their buildup in the Gomati River water reservoir. Fish samples from the Gomati River near Lucknow, India, were collected and dissected into pieces with stainless steel blades. The samples were then dried at 100°C for 24 hours, revealing the anatomical features of Siluriformes and Channa punctata species. The Pb, a heavy metal, was found to have the highest concentration in the scales of Siluriformes, with values in various regions, while Cd had the lowest concentration, ranging from 0.016 to 0.112 mg/kg. Excessive consumption of fish can be dangerous due to toxic metallic elements accumulation. Siluriformes and Channa punctata fish species have high levels of Lead and Cadmium, respectively, indicating potential health risks. Channa punctata and Siluriformes fish have higher heavy metal concentrations than Siluriformes, with lead, iron, and nickel levels beyond WHO limits, while chromium, zinc, cadmium, and copper levels are below WHO limits.

An overview of heavy metals treatment & management for laboratory waste liquid (LWL)

The laboratory waste liquid (LWL) is the discarded liquid after the completion of analysis and is produced from the testing laboratories including regulatory institutions, colleges, universities and research organizations. This LWL is laden with a variety of heavy metals due to the use of heavy metal salts in analysis and the treatment and safe disposal of LWL is seldom given due consideration. Thus, the management of hazardous laboratory waste liquid (HLWL) containing heavy metals is essential at the source itself. Accordingly, this article presents systematic review of three processes for heavy metals removal viz. precipitation, adsorption, and membrane separation. The review covers various factors such as heavy metal removal efficiencies & concentration ranges, optimum pH, most frequently studied methods, less studied aspects, its commercial availability, operational ease, and the potential of risk minimization with due concern to toxic heavy metals. The concentrations of heavy metals in LWL is also presented. Based on the review, activated carbon (AC) adsorption appears to be the best option for LWL having heavy metals concentration of less than 10 mg/L. The heavy metals removal efficiency of more than 95% can be achieved at an AC dose of 0.2–1 g/L. The hydroxide precipitation was found to achieve more than 95% removal efficiencies at higher heavy metals concentrations. Thus, for concentrations higher than 10 mg/L up to 3000 mg/L, the hydroxide precipitation followed by activated carbon adsorption may prove beneficial.

Mechanisms of Toxicity of Heavy Metals and the Microbial Strategies for their Mitigation: A Review

Heavy metals toxicity is a major concern worldwide, especially in areas where untreated industrial effluents are released in the environment. Most important heavy metals in this context are arsenic, cadmium, chromium, copper, cobalt, lead, mercury, nickel, selenium and zinc. Some of these are also essential trace elements and play crucial roles in different biological processes. Exposure to high concentration of heavy metals is hazardous for life and can lead to various medical conditions including different types of cancers. The remediation strategies to treat these contaminants involve physical, chemical as well as biological techniques, the latter of which is considered most environment friendly and inexpensive. Bioremediation is the process of removal and detoxification of toxic pollutants using microorganisms. Many microorganisms have evolved different strategies to resist and detoxify such heavy metals. This may include excluding the metals out of the cell, binding of the metals to metal binding proteins to sequester it, conversion of metals into less or non-toxic form by enzymes and alternation of cell components to reduce metal sensitivity. Different genes and proteins are involved in these processes which can be explored for biotechnological interventions and practical applications of bioremediation. This review article discusses the mechanisms of heavy metals’ toxicity, different remediation technologies available, and the various strategies that microorganisms employ to detoxify them.

The effect of heavy metals (Cd, Cu, and Pb) on plant growth parameters and the phytoremediation capacity of corn

Heavy metal contamination is currently a major global environmental issue. Heavy metals contaminate the soils where crops and vegetables grow. Maize (Zea mays L.) is widely employed for phytoremediation because of its high biomass output and metal accumulation capacity. Depending on the plant and soil properties, some metals can be dangerous in high amounts. During our in vitro experiment, different levels of Cd, Cu, and Pb were introduced to a growth medium to allow maize plants to develop under diverse conditions. The study examined numerous growth features under certain metal stress conditions, including seed germination, plant height, biomass, and chlorophyll content, as well as the toxicity symptoms and mechanisms of the most common heavy metals. The study revealed that, while the maize plant is a good heavy metal accumulator, high heavy metal concentrations had a negative impact on several growth indicators: at 250 ppm, Cd inhibited captive seed germination by 50% and wild seed germination by 42.9%; Pb suppressed captive seed germination by 57% and wild seed germination by 42.9%; and Cu inhibited germination in both seed types by 40%. Similarly, plant height decreased in the following order: Pb (36.2%), Cd (24.8%), and Cu (9.7%) for the captive seed plant, and Pb (46.7%), Cd (28%), and Cu (13%) for the wild seed plant. Keywords: MAIZE, STRESS, TOXICITY, HEAVY METAL, POLLUTION, PHYTOREMEDIATION, BIOACCUMULATION

APPLICATION OF BIOREMEDIATION IN MITIGATION OF HEAVY METAL STRESS ON PLANTS

Heavy metals are toxic metals which are persistent in nature due to their nondegradable nature.Due to increase in industrialization and urbanization heavy metals are being added to theenvironment and consequently causing heavy metal pollution of water and soil. These heavy metals cause significant stress on crop plants and effect various parameters such as growth and yield. Manymethods like physical, chemical and biological methods are available to degrade these heavymetals. Recently, bioremediation is being widely used because of its cost-effective andenvironment friendly approach. Bioremediation is a biological process which makes use ofmicroorganisms to remove hazardous substances or environmental pollutants from air, water,soil, industrial effluents etc. Bacteria and fungi are mostly employed for bioremediation.These organisms are genetically engineered for effective use in bioremediation. This not onlydiscussed about the importance of bacteria for bioremediation of heavy metals but alsodiscussed about the challenges and limitations of bacteria for bioremediation. In this chapter, a variety of mechanisms responsible for adaptation of microorganisms to high heavy metal concentrations, e.g. metal sorption, uptake and accumulation, extracellular precipitation and enzymatic oxidation or reduction, will be reported. Moreover, molecular mechanisms responsible for their metal tolerance will be described.

Assessment of water quality and heavy metal contamination in ballast water: Implications for marine ecosystems and human health

The global menace of non-compliance with ballast water management poses a pressing environmental threat, as it facilitates the transfer of harmful organisms and sediment contaminants. This study investigates the environmental impact of ballast water discharged by ships, focusing on water quality and heavy metal concentrations. The release of ballast water, often containing elevated levels of heavy metals like mercury, lead, and cadmium, poses a significant threat to marine ecosystems. The research, involving water sample collection from ten different vessels across various countries, assesses physicochemical parameters and heavy metal concentrations. Results indicate variations in temperature, turbidity, conductivity, dissolved oxygen, and pH levels among samples. Turbidity values surpassing WHO limits suggest potential anthropogenic pollution. The study identifies significant differences in pH values, potentially influencing microbial populations. Total dissolved solids and total suspended solids values vary, affecting the distribution of potential pathogens. The results reveal varying total concentrations of heavy metals (mg/L) in the following decreasing order: SA&gt;SE&gt;SF&gt;SB&gt;SC&gt;SD&gt;SH&gt;SI&gt;SG&gt;SJ(6.07 &gt;4.95 &gt; 2.07 &gt; 1.59&gt;0.24&gt;1.22&gt;0.09&gt;0.04&gt;0.03&gt;0.01). The highest concentration of heavy metals is recorded for iron (SA= 5.78), zinc (mg/L) (SB = 1.36, SE = 1.30, and SF = 1.35) and lead (Pb) (SE = 2.39). The elevated iron levels in vessels from SA are potentially linked to corrosion processes. Cadmium, lead, and nickel were not detected, except for lead in the sample from SE. Copper concentrations were aligned with EU standards in the vessels. Proper ballast water management is vital for monitoring water qualities, preventing environmental spread of heavy metals, ensuring marine ecosystem health, and developing compliance strategies for ships docking in ports. Highlights Global shipping causes heavy metal pollution, affecting human and ecosystem health Physicochemical parameters variations suggest potential pollution and microbial impact Mercury, lead, and cadmium in ballast water (BW) pose threats to marine ecosystems Increased iron levels could be associated with corrosion processes Effective BW management is crucial for environmental conservation