Hierarchical Self-assembly Process Research Articles

Low-Temperature Synthesis of Bi2S3 Hierarchical Microstructures via Co-Precipitation and Digestive Process in Aqueous Medium.

Bismuth sulfide (Bi2S3) nanostructures have gained significant attention in the fields of catalysis, optoelectronics, and biomedicine due to their unique physicochemical properties. This paper introduces a simple and cost-effective method for producing Bi2S3 microstructures at low temperatures (25 and 70 °C). These microstructures are formed by the hierarchical self-assembly of Bi2S3 nanoparticles, which are typically 15-40 nm in size. The nanoparticles are synthesized by the co-precipitation of thioglycolic acid, thioacetamide, and bismuth nitrate in water. The study delves into the phase composition and morphological evolution of the microstructures, concerning the chemical composition of the solution and the synthesis temperature. X-ray analysis has confirmed the formation of single-phase bismuthinite Bi2S3. The synthesis process generates primary building blocks in the form of 15-40 nm Bi2S3 nanocrystals, which then go through a hierarchical self-assembly process to produce a range of micrometer-sized structures. A scanning electron microscopy examination revealed that the primary nanoparticles self-assemble into quasi-1D worm-like nanostructures, which then self-assemble to create sponge-shaped microstructures. These structures subsequently self-organize and refine into either flower- or dandelion-like microstructures, mostly depending on the synthesis temperature and the chemistry of the digestion medium.

Visible light-mediated supramolecular framework for tunable CO2 adsorption

In the pursuit of creating azobenzene-functionalized photo-responsive supramolecular frameworks (PSMFs) activated by the visible spectrum, an endeavor traditionally relied on ultraviolet activation, we report the successful fabrication of a visible light-mediated metal–organic cage-based PSMF, designated as NUT-104. This achievement was realized by the hierarchical self-assembly process of Zr-metal–organic cages featuring ortho-fluoroazobenzene functional terephthalic acid and tri-nuclear Zr-clusters. NUT-104 displays permanent porosity coupled with reversible responsiveness to visible light. This remarkable behavior emerges as a consequence of the σ-electron-withdrawing effect induced by the presence of fluorine substituents. Visible light-regulated CO2 adsorption capacity can be achieved and the change value can reach 61 %, while the change for CH4 and N2 is only 7 % and 3 %, respectively. In response to irradiation at wavelengths of 520 and 420 nm, respectively, the azobenzene moieties within the NUT-104 structure exhibit a remarkable capacity for visible light-controlled reversible conformational changes. Grand Canonical Monte Carlo simulations unveiled that the dynamic reorganization of the NUT-104 proficiently governs the accessibility of CO2 adsorption sites positioned within the interstitial regions of proximate cages. The advent of NUT-104, underpinned by its visible light responsiveness and versatile tunability, paves the way for avenues of exploration in controlled gas separation and storage applications.

Precise Control of Two-Dimensional Hexagonal Platelets via Scalable, One-Pot Assembly Pathways Using Block Copolymers with Crystalline Side Chains.

Crystallization-driven self-assembly (CDSA) of block copolymers (BCPs) in selective solvents provides a promising route for direct access to two-dimensional (2D) platelet micelles with excellent uniformity, although significant limitations also exist for this robust approach, such as tedious, multistep procedures, and low yield of assembled materials. Herein, we report a facile strategy for massively preparing 2D, highly symmetric hexagonal platelets with precise control over their dimensions based on BCPs with crystalline side chains. Mechanistic studies unveiled that the formation of hexagonal platelets was subjected to a hierarchical self-assembly process, involving an initial stage of formation of kinetically trapped spheres upon cooling driven by solvophobic interactions, and a second stage of fusion of such spheres to the 2D nuclei to initiate the lateral growth of hexagonal platelets via sequential particle attachments driven by thermodynamically ordered reorganization of the BCP upon aging. Moreover, the size of the developed 2D hexagonal platelets could be finely regulated by altering the copolymer concentration over a broad concentration range, enabling scale-up to a total solids concentration of at least 6% w/w. Our work reveals a new mechanism to create uniform 2D core-shell nanoparticles dictated by crystallization and particle fusion, while it also provides an alternative facile strategy for the design of soft materials with precise control of their dimensions, as well as for the scalability of the derived nanostructures.

π-Sticked Metal‒Organic Monolayers for Single-Metal-Site Dependent CO2 Photoreduction and Hydrogen Evolution Reaction.

Hierarchical self-assembly of 2D metal‒organic layers (MOLs) for the construction of advanced functional materials have witnessed considerable interest, due to the increasing atomic utilizations and well-defined atom‒property relationship. However, the construction of atomically precise MOLs with mono-/few-layered thickness through hierarchical self-assembly process remains a challenge, mostly because the elaborate long-range order is difficult to control via conventional noncovalent interaction. Herein, a quadruple π-sticked metal‒organic layer (πMOL) is reported with checkerboard-like lattice in ≈1.0 nanometre thickness, on which the catalytic selectivity can be manipulated for highly efficient CO2 reduction reaction (CO2RR) and hydrogen evolution reaction (HER) over a single metal site. In saturated CO2 aqueous acetonitrile, Fe-πMOL achieves a highly effective CO2RR with the yield of ≈3.98mmolg‒1h‒1 and 91.7% selectivity. In contrast, the isostructural Co-πMOL as well as mixed metallic FeCo-πMOL exhibits a high activity toward HER under similar conditions. DFT calculations reveal that single metal site exhibits the significant difference in CO2 adsorption energy and activation barrier, which triggers highly selective CO2RR for Fe site and HER for Co site, respectively. This work highlights the potential of supramolecular π…π interaction for constructing monolayer MOL materials to uniformly distribute the single metal sites for artificial photosynthesis.

Bubble-Mediated Large-Scale Hierarchical Assembly of Ultrathin Pt Nanowire Network Monolayer at Gas/Liquid Interfaces.

Extensive macroscale two-dimensional (2-D) platinum (Pt) nanowire network (NWN) sheets are created through a hierarchical self-assembly process with the aid of biomolecular ligands. The Pt NWN sheet is assembled from the attachment growth of 1.9 nm-sized 0-D nanocrystals into 1-D nanowires featuring a high density of grain boundaries, which then interconnect to form monolayer network structures extending into centimeter-scale size. Further investigation into the formation mechanism reveals that the initial emergence of NWN sheets occurs at the gas/liquid interfaces of the bubbles produced by sodium borohydride (NaBH4) during the synthesis process. Upon the rupture of these bubbles, an exocytosis-like process releases the Pt NWN sheets at the gas/liquid surface, which subsequently merge into a continuous monolayer Pt NWN sheet. The Pt NWN sheets exhibit outstanding oxygen reduction reaction (ORR) activities, with specific and mass activities 12.0 times and 21.2 times greater, respectively, than those of current state-of-the-art commercial Pt/C electrocatalysts.

Fast Self-Assembly Dynamics of a β-Sheet Peptide Soft Material.

Peptide-based hydrogels are promising biocompatible materials for wound healing, drug delivery, and tissue engineering applications. The physical properties of these nanostructured materials depend strongly on the morphology of the gel network. However, the self-assembly mechanism of the peptides that leads to a distinct network morphology is still a subject of ongoing debate, since complete assembly pathways have not yet been resolved. To unravel the dynamics of the hierarchical self-assembly process of the model β-sheet forming peptide KFE8(Ac-FKFEFKFE-NH2 ), high-speed atomic force microscopy (HS-AFM) in liquid is used. It is demonstrated that a fast-growing network, based on small fibrillar aggregates, is formed at a solid-liquid interface, while in bulk solution, a distinct, more prolonged nanotube network emerges from intermediate helical ribbons. Moreover, the transformation between these morphologies has been visualized. It is expected that this new in situ and in real-time methodology will set the path for the in-depth unravelling of the dynamics of other peptide-based self-assembled soft materials, as well as gaining advanced insights into the formation of fibers involved in protein misfolding diseases.

One-Dimensional Helical Nanostructures from the Hierarchical Self-Assembly of an Achiral "Rod-Coil" Alternating Copolymer.

The self-assembly of alternating copolymers (ACPs) has attracted considerable interest due to their unique alternating nature. However, compared with block copolymers, their self-assembly behavior remains much less explored and their reported self-assembled structures are limited. Here, the formation of supramolecular helical structures by the self-assembly of an achiral rod-coil alternating copolymer named as poly(quarter(3-hexylthiophene)-alt-poly(ethylene glycol)) (P(Q3HT-alt-PEG)), is reported. The copolymer exhibits an interesting hierarchical self-assembly process, driven by the π-π stacking of the Q3HT segments and the solvophobic interaction of the alkyl chains in tetrahydrofuran (THF)-isopropanol mixed solvents. The copolymer first self-assembled into thin nanobelts with a uniform size, then grows to helical nanoribbons and eventually twisted into helical nanowires with an average diameter of 25 ± 9nm and a mean pitch of 80 ± 10nm. Dissipative particle dynamics (DPD) simulation supports the formation course of the helical nanowires. Furthermore, the addition of (S)-ethyl lactate and (R)-ethyl lactate in the self-assembly of P(Q3HT-alt-PEG) results in the formation of left-handed and right-handed chiral nanowires, respectively, demonstrating the tunability of the chirality of the helical wires. This study expands the library of ordered self-assembled structures of ACPs, and also brings a new strategy and mechanism to construct helical supramolecular structures.

Unimolecular Nanoparticles toward More Precise Regulations of Self-Assembled Superlattices in Soft Matter.

The hierarchical self-assembly process opens up great potential for the construction of nanostructural superlattices. Precise regulation of self-assembled superlattices, however, remains a challenge. Even when the primary molecules are precise, the supramolecular motifs (or secondary building blocks) can vary dramatically. In the present work, we propose the concept of unimolecular nanoparticles (UMNPs). The UMNPs act as the supramolecular motif and directly pack into the superlattices. A highly branched giant molecule is presented. We systematically explore its conformations and the superlattice of this giant molecule. Moreover, intriguing complex phases are discovered when blending this UMNP with other conventional giant molecules. These binary mixtures provide direct evidence to support our previously proposed self-sorting process in the self-assembly of "soft alloys". The concept of UMNPs offers a unique approach toward more precise regulation of self-assembled superlattices in soft matter.

Self-Assembly of Alkylamido Isophthalic Acids toward the Design of a Supergelator: Phase-Selective Gelation and Dye Adsorption.

A new series of 5-alkylamido isophthalic acid (ISA) derivatives with varying single and twin alkyl chain lengths were designed and synthesized as potential supramolecular organogelators. 5-alkylamido ISAs with linear or branched alkyl tail-groups of different lengths were effective gelators for low polarity solvents. In particular, among the presented series, a derivative with a branched, 24 carbon atom tail-group behaves as a “supergelator” with up to twenty organic solvents forming gels that are highly stable over time. The gelation behavior was analyzed using Hansen solubility parameters, and the thermal stability and viscoelastic properties of select gels were characterized. Microscopy, spectroscopy, powder X-ray diffraction, and computer modeling studies were consistent with a hierarchical self-assembly process involving the formation of cyclic H-bonded hexamers via the ISA carboxylic acid groups, which stack into elementary fibers stabilized by H-bonding of the amide linker groups and π–π stacking of the aromatic groups. These new nanomaterials exhibited potential for the phase-selective gelation of oil from oil–water mixtures and dye uptake from contaminated water. The work expands upon the design and synthesis of supramolecular self-assembled nanomaterials and their application in water purification/remediation.

Laser-induced crystal growth observed in CsPbBr3 perovskite nanoplatelets.

Benefiting from the easily adjustable optical properties of perovskite, CsPbBr3 nanocrystals (NCs) are considered to show their advantages in the field of display. Here, we report that a selective laser irradiation is used to induce CsPbBr3 nanostructural reshaping and then yielding a morphological change. Under 360 or 405 nm laser irradiation, a hierarchical crystal growth process occurs for the fabricated CsPbBr3 nanoplatelets (NPLs), which are first arranged in a side-by-side manner and reshaped into nanorods (NRs), and then NRs are arranged in the face-to-face manner to reshape into NCs. The entire process is monitored optically and microscopically, which showed that crystal growth relies on seeking a dynamic balance between heat dissipation and accumulation under laser irradiation. The heat on NPLs generated by laser irradiation dissipated with a low dissipation rate and thus led to temperature rising and lattice breaking, which turned out to be the driving force for the crystal growth in CsPbBr3 NPLs. This feasible laser irradiation-assisted method provides for crystal growth a reliable and scalable route toward the preparation of perovskite functional materials.

Hierarchical propagation of structural features in protein nanomaterials.

Natural high-performance materials have inspired the exploration of novel materials from protein building blocks. The ability of proteins to self-organize into amyloid-like nanofibrils has opened an avenue to new materials by hierarchical assembly processes. As the mechanisms by which proteins form nanofibrils are becoming clear, the challenge now is to understand how the nanofibrils can be designed to form larger structures with defined order. We here report the spontaneous and reproducible formation of ordered microstructure in solution cast films from whey protein nanofibrils. The structural features are directly connected to the nanostructure of the protein fibrils, which is itself determined by the molecular structure of the building blocks. Hence, a hierarchical assembly process ranging over more than six orders of magnitude in size is described. The fibril length distribution is found to be the main determinant of the microstructure and the assembly process originates in restricted capillary flow induced by the solvent evaporation. We demonstrate that the structural features can be switched on and off by controlling the length distribution or the evaporation rate without losing the functional properties of the protein nanofibrils.

Hierarchical Self-Assembly and Multidynamic Responsiveness of Fluorescent Dynamic Covalent Networks Forming Organogels.

Smart stimuli-responsive fluorescent materials are of interest in the context of sensing and imaging applications. In this project, we elaborated multidynamic fluorescent materials made of a tetraphenylethene fluorophore displaying aggregation-induced emission and short cysteine-rich C-hydrazide peptides. Specifically, we show that a hierarchical dynamic covalent self-assembly process, combining disulfide and acyl-hydrazone bond formation operating simultaneously in a one-pot reaction, yields cage compounds at low concentration (2 mM), while soluble fluorescent dynamic covalent networks and even chemically cross-linked fluorescent organogels are formed at higher concentrations. The number of cysteine residues in the peptide sequence impacts directly the mechanical properties of the resulting organogels, Young's moduli varying 2500-fold across the series. These materials underpinned by a nanofibrillar network display multidynamic responsiveness following concentration changes, chemical triggers, as well as light irradiation, all of which enable their controlled degradation with concomitant changes in spectroscopic outputs─self-assembly enhances fluorescence emission by ca. 100-fold and disassembly quenches fluorescence emission.

Ordered Packing of β-Sheet Nanofibrils into Nanotubes: Multi-hierarchical Assembly of Designed Short Peptides.

Although it is well-known proteins and their complexes are hierarchically organized and highly ordered structures, it remains a major challenge to replicate their hierarchical self-assembly process and to fabricate multihierarchical architectures with well-defined shapes and monodisperse characteristic sizes via peptide self-assembly. Here we describe an amphiphilic short peptide Ac-I3GGHK-NH2 that first preassembles into thin, left-handed β-sheet nanofibrils, followed by their ordered packing into right-handed nanotubes. The key intermediate morphology and structures featuring the hierarchical process are simultaneously demonstrated. Further mechanistic exploration with the variants Ac-I3GGGK-NH2, Ac-I3GGFK-NH2, and Ac-I3GGDHDK-NH2 reveals the vital role of multiple His-His side chain interactions between nanofibrils in mediating higher-order assembly and architectures. Altogether, our findings not only advance current understanding of hierarchical assembly of peptides and proteins but also afford a paradigm of how to take advantage of side chain interactions to construct higher-order assemblies with enhanced complexities.

Selective Deposition of Copper on Self-Assembled Block Copolymer Surfaces via Physical Vapor Deposition.

Block copolymer (BCP) self-assembly produces chemically and topographically patterned surfaces which are used to guide the formation of Cu nanostructures by exploiting differences in the mobility of vapor-deposited species on each microdomain. Cu metal films a few nm thick were deposited on three different BCP surfaces self-assembled from poly(styrene-b-methyl methacrylate) (PS-b-PMMA) and polystyrene-b-poly(2-vinylpyridine) (PS-b-P2VP). For PS-b-PMMA, the effects of chemical heterogeneity dominate over the effects of the 2 nm peak-to-valley topography, and sputtered Cu preferentially wets the PS block. PS-b-P2VP has greater chemical and topographical contrast and shows a wider process window for selective deposition. Cu grown by evaporation has less surface mobility, and shadowing effects are believed to dominate pattern formation. The hierarchical self-assembly process of thin metal films on BCP surfaces provides a route to fabricating heterogeneous metallic nanostructures.

Branched Aggregates with Tunable Morphology via Hierarchical Self-Assembly of Azobenzene-Derived Molecular Double Brushes.

Hierarchical self-assembly is one of the most effective approaches to fabricate nature-inspired materials with subtle nanostructures. We report a distinct hierarchical self-assembly process of molecular double brushes (MDBs) with each graft site carrying a poly(azobenzene-acrylate) (PAzo) chain and a poly(ethylene oxide) (PEO) chain. Asymmetric tapered worm (ATW) nanostructures with chain-end reactivity assembling from the azobenzene-derived MDBs serve as primary subunits to prepare branched supermicelles by increasing water content (Cw ) in THF/water. Various natural Antedon-shaped multiarm worm-like aggregates (MWAs) can be created via the particle-particle connection of ATWs. Intriguingly, the azobenzene moieties undergo trans-cis isomerization upon UV irradiation and further promote a morphology evolution of MWAs. Multiscale supermicelles comprised of starfish shapes with differing central body and arm morphologies (e.g., compare to the biological specimens Luidia ciliaris and Crossaster papposus) were prepared by manipulating irradiation time.

Light-Induced Reversible Hierarchical Self-Assembly of Amphiphilic Diblock Copolymers into Microscopic Vesicles with Tunable Optical and Nanocarrier Properties.

In contrast to the conventional hierarchical self-assembly process, effective methods to enable reversible hierarchical self-assembly of block copolymers are comparatively few and limited in scope. Herein, we report, for the first time, a simple yet robust strategy for light-induced reversible hierarchical self-assembly of an amphiphilic diblock copolymer, poly(4-vinylpyridine)-block-poly[6-[4-(4-butyloxyphenylazo)phenoxy]hexyl methacrylate] (denoted P4VP-b-PAzoMA). The hierarchical structures are constructed via a two-step self-assembly process (first-level reverse micelles, second-level compound micelles, and rearrangement into micrometer-sized vesicles) driven by use of solvent. Intriguingly, because of reversible photoinduced trans-to-cis isomerization of azobenzene moieties in PAzoMA, the vesicles could disassemble into subunits upon UV light and then recover the nearly identical vesicular morphology upon visible light. Such a reversible hierarchical self-assembly process is accompanied by reversible fluorescence, encapsulation, and controlled release of dyes and can be used as a template for the synthesis of nanoparticles. Clearly, the ability to render the light-enabled reversible hierarchical self-assembly provides a unique platform for smart delivery vehicles and templates for nanomaterials.

Antibiotic-Loaded MMT/PLL-Based Coating on the Surface of Endosseous Implants to Suppress Bacterial Infections.

BackgroundBone infections remain one of the most common and serious complications of orthopedic surgery, posing a tremendous economic burden to society and patients. This is because bacteria colonize and multiply on the surface of the implant. The (MMT/PLL)8 multilayer films have been shown to effectively release antibiotics depending on the changes in the microenvironment. Here, vancomycin was loaded into the (MMT/PLL)8 multilayer films, which were prepared to be used as a local delivery system for the treatment of bone infections.MethodsWe used the layer-by-layer self-assembly method to prepare VA-loaded coatings (MMT/PLL-VA)8 consisting of montmorillonite (MMT), poly-L-lysine (PLL), and VA. The thickness and surface morphology of coatings were characterized using spectroscopic ellipsometry and scanning electron microscopy (SEM). In order to evaluate the drug release behavior from coatings in different media, we measured the size of the zone of inhibition. Additionally, in vitro antibacterial activity was assessed using the shake-flask culture method and SEM images, while that of in vivo was evaluated by establishing an animal model of bone infection.ResultsOur findings revealed that small-molecule antibiotics were successfully loaded into the (MMT/PLL-VA)8 multilayer film structure during the hierarchical self-assembly process and subsequently the multilayer film structure depicted linear growth behavior. The PLL in the multilayer films was progressively degraded which triggered the VA release when contacted with CMS or bacterial infections. The release of VA from multilayer film structure depends on the concentration changes of CMS. Notably, the multilayer films presented great in vitro cell compatibility. Moreover, the prepared antibacterial multilayer films showed excellent antibacterial property by killing more than 99.99% of S. aureus in 24 h. More importantly, we found that multilayer film exhibits good sterilization effect and biocompatibility under the stimulation of bacterial liquid both in vitro and in vivo antibacterial ability tests.ConclusionAltogether, this study shows that (MMT/PLL-VA)8 multilayer films containing CMS and bacteria-responsive drug release properties posess high bactericidal activity and good biocompatibility. This finding provides a novel strategy for the treatment of bone infections.

Self-Assembly of Discrete Porphyrin/Calix[4]tube Complexes Promoted by Potassium Ion Encapsulation.

The pivotal role played by potassium ions in the noncovalent synthesis of discrete porphyrin-calixarene nanostructures has been examined. The flattened-cone conformation adopted by the two cavities of octa-cationic calix[4]tube C4T was found to prevent the formation of complexes with well-defined stoichiometry between this novel water-soluble calixarene and the tetra-anionic phenylsulfonate porphyrin CuTPPS. Conversely, preorganization of C4T into a C4v-symmetrical scaffold, triggered by potassium ion encapsulation (C4T@K+), allowed us to carry out an efficient hierarchical self-assembly process leading to 2D and 3D nanostructures. The stepwise formation of discrete CuTPPS/C4T@K+ noncovalent assemblies, containing up to 33 molecular elements, was conveniently monitored by UV/vis spectroscopy by following the absorbance of the porphyrin Soret band.

A colon-targeted podophyllotoxin nanoprodrug: synthesis, characterization, and supramolecular hydrogel formation for the drug combination.

Making full use of the undeveloped bioactive natural product derivatives by selectively delivering them to target sites can effectively increase their druggability and reduce the wastage of resources. Azo-based prodrugs are widely regarded as an effective targeted delivery means for colon-related disease treatment. Herein, we report a new-type of azo-based nanoprodrug obtained from bioactive natural products, in which the readily available podophyllotoxin natural products are connected with methoxy polyethylene glycol (mPEG) via a multifunctional azobenzene group. The amphiphilic prodrug can form nanosized micelles in water and will be highly selectively activated by azoreductases, leading to the in situ generation of anticancer podophyllotoxin derivatives (AdP) in the colon after the cleavage of the azo bond. To satisfy the demand of drug carriers for cancer combination therapy in clinics, α-CD is further introduced into this nanoprodrug micelle system to form a supramolecular hydrogel via a cascade self-assembly strategy. Using imaging mass spectrometry (IMS), the colon-specific drug release ability of the hydrogel after oral administration is demonstrated at the molecular level. Finally, the nanoprodrug hydrogel is further used as a carrier to load a hydrophilic anti-cancer drug 5-FU during the hierarchical self-assembly process and to co-deliver AdP and 5-FU for the drug combination. The combination use of AdP and 5-FU provides enhanced cytotoxicity which indicates a significant synergistic interaction. This work offers a new way to enhance the therapeutic effect of nanoprodrugs via drug combination, and provides a new strategy for reusing bioactive natural products and their derivatives.

PH-Controlled Hierarchical Assembly/Disassembly of Multicompartment Micelles in Water.

Multicompartment micelles (MCMs) have become attractive drug delivery systems as they allow the separate storage of two or more incompatible cargos in their core compartments (e.g., drugs and dyes for imaging). A recent hierarchical self-assembly process for hydrophobic terpolymers in organic solvents showed the ability to form very homogeneous MCM populations, yet the transfer of this process into water requires a better understanding of the formation mechanism and influence of chain mobility during assembly. Here, the synthesis of a linear poly(oligo(ethylene glycol) methacrylate)-block-poly(benzyl acrylate)-block-poly(4-vinylpyridine) (POEGMA-b-PBzA-b-P4VP) triblock terpolymer by reversible addition-fragmentation chain transfer (RAFT) polymerization is reported as well as its step-wise assembly into MCMs in water with POEGMA corona, PBzA patches, and P4VP core. Reversible assembly/disassembly of the MCMs is investigated through protonation/deprotonation of the P4VP core. Interestingly, the low glass transition temperature (Tg ) of the hydrophobic PBzA middle block causes MCMs to directly disassemble into molecularly dissolved chains instead of patchy micelles due to mechanical stress from electrosteric repulsion of the protonated P4VP corona chains. In addition, pH resistant MCMs are created by core-crosslinking and fluorescent properties are added by covalent anchoring of fluorescent dyes via straightforward click chemistry.