Heteroaryl Boronic Acids Research Articles

Microwave-Assisted Regioselective Suzuki Coupling of 2,4-Dichloropyrimidines with Aryl and Heteroaryl Boronic Acids

Suzuki coupling reaction has been often used for the preparation of a diverse set of substituted pyrimidines. In this study, the Suzuki coupling of 2,4-dichloropyrimidines with aryl and heteroaryl boronic acids was investigated. A thorough screening of reaction conditions and the use of microwave irradiation led to a very efficient and straightforward synthetic procedure providing C4-substituted pyrimidines in good to excellent yields. Short reaction time (15 min) and extremely low catalyst loading (0.5 mol%) are the main advantages of our tetrakis(triphenylphosphine)palladium(0) catalyzed microwave-assisted procedure, which could be used for quick and low-cost regioselective preparation of substituted pyrimidine rings.

Cu-Catalyzed Oxidative Allylic C-H Arylation of Inexpensive Alkenes with (Hetero)Aryl Boronic Acids.

Herein, we present a regioselective Cu-catalyzed oxidative allylic C(sp3)-H arylation by radical relay using a broad range of heteroaryl boronic acids with inexpensive and readily available unactivated terminal and internal olefins. This C(sp2)-C(sp3) allyl coupling has the advantage of using cheap, abundant, and nontoxic Cu2O without the need to use prefunctionalized alkenes, thus offering an alternative method to allylic arylation reactions that employ more traditional coupling partners with preinstalled leaving groups (LGs) at the allylic position.

Palladium-catalyzed prenylation of (hetero)aryl boronic acids

Prenyl or dimethylallyl groups are common structural motifs in natural products and small molecule therapeutics. In this report, we describe a palladium-catalyzed method for the cross-coupling of aryl and heteroaryl boronic acids with prenyl alcohol. Catalyst systems based on dialkylbiaryl phosphines were highly active for this transformation. These supporting ligands provided opportunities for tuning the efficiency and regioselectivity of carbon–carbon bond formation. In addition, this method was further extended to the cross-coupling of symmetrical allylic alcohols with aryl boronic acids.

Efficient microwave-assisted Suzuki-Miyaura cross-coupling reaction of 3-bromo pyrazolo[1,5-a]pyrimidin-5(4H)-one: towards a new access to 3,5-diarylated 7-(trifluoromethyl)pyrazolo[1,5-a]pyrimidine derivatives.

A convenient and efficient synthetic route to C3-arylated 7-trifluoromethylpyrazolo[1,5-a]pyrimidin-5-one derivatives has been reported starting from 3-bromo-7-(trifluoromethyl)pyrazolo[1,5-a]pyrimidin-5-one through a Suzuki–Miyaura cross-coupling reaction. The arylation (heteroarylation) strategy can be performed using a wide variety of aryl and heteroaryl boronic acids and requiring a tandem catalyst XPhosPdG2/XPhos to avoid the debromination reaction. These optimized conditions were successfully extended to the synthesis of 7-, 8- and 9-arylated pyrimido[1,2-b]indazol-2-ones from their corresponding brominated starting materials. Furthermore, the second C-5 arylation of C3-arylated pyrazolo[1,5-a]pyrimidin-5-ones was achieved under standard Suzuki–Miyaura cross-coupling conditions, after activating the C–O bond of the lactam function with PyBroP, giving access to a small library of 3,5-diarylated 7-(trifluoromethyl)pyrazolo[1,5-a]pyrimidines in good to excellent yields. The interest of this approach has been highlighted by the synthesis of a known anti-inflammatory agent. Additionally, a preliminary biological evaluation has revealed that a number of derivatives display micromolar IC50 values against monoamine oxidase B, an important target in the field of neurodegenerative disorders.

Green‐Synthesized Nickel Nanoparticles on Reduced Graphene Oxide as an Active and Selective Catalyst for Suzuki and Glaser‐Hay Coupling Reactions

A mild and benign methodology to syntheses biaryls and 1,3‐diynes has been demonstrated using the nickel nanoparticles supported on reduced graphene oxide (RGO‐Ni) as a heterogeneous catalyst which is prepared using green reagents. A series of substituted biaryls and 1,3‐diynes has been synthesised in good to excellent yields through C‐C homocoupling reaction of arylboronic acids and terminal alkynes respectively using 1,4‐dioxane as a benign solvent. The present ligand‐free catalytic system proceeds smoothly under mild conditions, avoids noble and stoichiometric metal reagents and tolerates sensitive functional groups. Also has a wide substrate scope and feasible with other nitrogen and sulphur containing heteroaryl boronic acids. Hot filtration test unambiguously proves the true heterogeneity of the catalyst and which support for the further reusability of the catalyst for several times without any change in the activity. The easy preparation and simple magnetic separation, stability and reusability reveal that as‐prepared RGO‐Ni as a versatile catalyst for the synthesis of polyaromatic compounds both in academia and industries.Highlights Green‐synthesized RGO‐Ni nanocomposite used as a heterogeneous catalyst for Suzuki type (C‐C) and Glaser–Hay (C ≡ C) homocoupling coupling reactions. Ligand‐free catalytic system and avoids noble and stoichiometric metal reagents Short reaction time with a minimum catalyst (nickel) loading RGO‐Ni nanocomposite is highly stable, reusable, and magnetically retrievable

Palladium-catalyzed fluoroacylation of (Hetero)arylboronic acid with fluorothioacetates at ambient temperature

A palladium-catalyzed fluoroacylation of (hetero)aryl boronic acid with the fluorothioacetates is described at ambient temperature. A variety of aryl, and heteroaryl boronic acids are compatible in the reaction, affording the corresponding fluoroalkyl ketones in moderate to good yields. Further late-stage di-, and trifluoroacylation of drug molecule clofibrate and estrone demonstrated the synthetic practicability of this protocol.2009 Elsevier Ltd. All rights reserved.

Nickel(II)-Catalyzed Synthesis of Sulfinates from Aryl and Heteroaryl Boronic Acids and the Sulfur Dioxide Surrogate DABSO

We report a redox-neutral Ni(II)-catalyzed sulfination of readily available aryl and heteroaryl boronic acids. Using the combination of commercially available, air-stable NiBr2·(glyme), a commercia...

Installation of Minimal Tetrazines through Silver-Mediated Liebeskind-Srogl Coupling with Arylboronic Acids.

Described is a general method for the installation of a minimal 6-methyltetrazin-3-yl group via the first example of a Ag-mediated Liebeskind-Srogl cross-coupling. The attachment of bioorthogonal tetrazines on complex molecules typically relies on linkers that can negatively impact the physiochemical properties of conjugates. Cross-coupling with arylboronic acids and a new reagent, 3-((p-biphenyl-4-ylmethyl)thio)-6-methyltetrazine (b-Tz), proceeds under mild, PdCl2(dppf)-catalyzed conditions to introduce minimal, linker-free tetrazine functionality. Safety considerations guided our design of b-Tz which can be prepared on decagram scale without handling hydrazine and without forming volatile, high-nitrogen tetrazine byproducts. Replacing conventional Cu(I) salts used in Liebeskind-Srogl cross-coupling with a Ag2O mediator resulted in higher yields across a broad library of aryl and heteroaryl boronic acids and provides improved access to a fluorogenic tetrazine-BODIPY conjugate. A covalent probe for MAGL incorporating 6-methyltetrazinyl functionality was synthesized in high yield and labeled endogenous MAGL in live cells. This new Ag-mediated cross-coupling method using b-Tz is anticipated to find additional applications for directly introducing the tetrazine subunit to complex substrates.

Cellulose as recyclable organocatalyst for ipso-hydroxylation of arylboronic acids

Cellulose catalyzed oxidative hydroxylation of aryl and hetero-arylboronic acids to the corresponding phenols under metal and base free strategy has been demonstrated. The sustainable ipso-hydroxylation takes place using hydrogen peroxide as an oxidant in water under mild condition in shorter period of time. Interestingly, easy recovery and reusability of heterogeneous catalyst without significant loss in catalytic yield makes the protocol environmentally benign.

Enantio‐ and Diastereoselective Suzuki–Miyaura Coupling with Racemic Bicycles

Herein, we describe a rhodium‐catalyzed enantio‐ and diastereoselective Suzuki–Miyaura cross‐coupling between racemic fused bicyclic allylic chlorides and boronic acids. The highly stereoselective transformation allows for the coupling of aryl, heteroaryl, and alkenyl boronic acids and gives access to functionalized bicyclic cyclopentenes, which can be converted into other five‐membered‐ring scaffolds with up to five contiguous stereocenters. Preliminary mechanistic studies suggest that these reactions occur with overall retention of the relative stereochemistry and are enantioconvergent for pseudo‐symmetric allylic chloride starting materials. In addition, a bicyclic allylic chloride starting material without pseudo‐symmetry undergoes a highly enantioselective regiodivergent reaction.

Enantio‐ and Diastereoselective Suzuki–Miyaura Coupling with Racemic Bicycles

AbstractHerein, we describe a rhodium‐catalyzed enantio‐ and diastereoselective Suzuki–Miyaura cross‐coupling between racemic fused bicyclic allylic chlorides and boronic acids. The highly stereoselective transformation allows for the coupling of aryl, heteroaryl, and alkenyl boronic acids and gives access to functionalized bicyclic cyclopentenes, which can be converted into other five‐membered‐ring scaffolds with up to five contiguous stereocenters. Preliminary mechanistic studies suggest that these reactions occur with overall retention of the relative stereochemistry and are enantioconvergent for pseudo‐symmetric allylic chloride starting materials. In addition, a bicyclic allylic chloride starting material without pseudo‐symmetry undergoes a highly enantioselective regiodivergent reaction.

Chiral Hydroxytetraphenylene-Catalyzed Asymmetric Conjugate Addition of Boronic Acids to Enones.

( S)-2,15-Br2-DHTP-catalyzed asymmetric conjugate addition of boronic acids to β-trifluoromethyl α,β-unsaturated ketones and enones was studied. The reaction afforded the corresponding Michael addition products in moderate to high yields with excellent enantioselectivities (up to 99:1 er). This catalytic system features mild reaction conditions, high efficiency, and tolerance to heteroarylboronic acids.

Versatile catalysis of “natural extract”: oxidation of sulfides and alcohols and ipso-hydroxylation of arylboronic acids

In the present work, we have described the versatile applications of naturally available inexpensive citrous lemon juice as biocatalyst for controlled oxidation of sulfides and alcohols and ipso-hydroxylation of arylboronic acids using 30% H2O2 as a green oxidant. A series of structurally divergent sulfides and benzyl alcohols were oxidized to their corresponding sulfoxides and aldehydes, respectively, with good-to-excellent yields. Similarly, aryl and heteroaryl boronic acids were rapidly, often within minutes, transformed to their corresponding phenols at room temperature.

Development of Titanium Dioxide-Supported Pd Catalysts for Ligand-Free Suzuki–Miyaura Coupling of Aryl Chlorides

The catalyst activities of various heterogeneous palladium catalysts supported by anatase-, rutile- and brookite-type titanium oxide for ligand-free Suzuki–Miyaura cross-coupling reactions of aryl chlorides were evaluated. Palladium acetate [Pd(OAc)2], supported on anatase-type titanium oxide (TiO2) via acetonitrile solution impregnation process without reduction [Pd/TiO2 (anatase-type)], demonstrated the highest catalyst activity in comparison to those of other titanium oxide (rutile- or brookite-type) supported Pd(OAc)2 without reduction and reduced Pd/TiO2 (anatase-type) [Pd(red)/TiO2 (anatase-type)]. Various aryl chloride and bromide derivatives were smoothly coupled with arylboronic acids including heteroarylboronic acids in the presence of 5–10 mol% Pd/TiO2 (anatase-type) without the addition of any ligands. Although the fresh Pd/TiO2 (anatase-type) catalyst was surprisingly comprised of ca. 1:2 mixture of palladium(II) and palladium(0) species according to X-ray photoelectron spectroscopy (XPS), in spite of no reduction process, significant further increment of palladium(0) species was observed during the Suzuki–Miyaura coupling reaction, and Pd/TiO2 (anatase-type) was converted into a catalyst, which contained palladium(0) species as the main component [ca. 1:5 mixture of palladium(II) and palladium(0) species]. Therefore, the reduction via the electron donation process to the palladium(II) species may have occurred during the reaction on anatase-type titanium oxide.

A convenient room temperature ipso‐nitration of arylboronic acid catalysed by molecular iodine using zirconium oxynitrate as nitrating species: An experimental and theoretical investigation

A simple and convenient protocol has been developed for ipso‐nitration of arylboronic acid catalysed by molecular iodine at room temperature, using zirconium oxynitrate as the nitrating species. The protocol is applicable to electronically diverse aryl‐ and heteroarylboronic acid moieties under mild reaction conditions with good to excellent isolated yields. Furthermore, a theoretical investigation has been performed for the same reaction, and reaction profiles are modelled using modern density functional theory (DFT). DFT‐based results support the experimentally observed results.

Graphene Oxide as a Carbocatalyst for Sustainable ipso-Hydroxylation of Arylboronic Acids: A Simple and Straightforward Strategy To Access Phenols

A metal-free and straightforward protocol for the synthesis of phenols from aryl and heteroaryl boronic acids has been demonstrated using graphene oxide as a carbocatalyst. This sustainable ipso-hy...

Antimicrobial Evaluation of New Synthesized Aza Heterocycles

The Pd-precatalyst was found to exhibit high catalytic activity for C-C bond formation in Suzuki-Miyaura cross-coupling reactions of differentheteroaryl (5-bromo-2-bromoacetyl) thiophene,4- (5-bromothiophen-2-yl)-methyl-1,3-thiazole,isoquinolinium bromide salt) with either aryl or heteroarylboronic acids. All reactions in this study were conducted in water under thermal heating as well as microwave irradiation conditions. The antimicrobial activities of synthesized compounds were evaluated against eight different strains of microorganisms (four fungal strains, two Gram-positive bacteria and two Gram-negative bacteria) using a cup plate diffusion method. The results showed that, most of the 20 tested compounds exhibited varying degrees of antimicrobial activities. However, 6 compounds recorded high antifungal activity (? 20 mm zone of inhibition), 3 were antibacterial (against Gram-positive) and 4 showed high broad-spectrum antibacterial efficacy (against Gram-positive and Gram-negative). These bioactive compounds are recommended for further pharmacological and toxicological investigations for possible formulation as wide spectrum antibacterial and antifungal agents.

Copper-Catalyzed Synthesis of Activated Sulfonate Esters from Boronic Acids, DABSO, and Pentafluorophenol.

The synthesis of pentafluorophenyl (PFP) sulfonate esters based on the Pd-catalyzed sulfination of aryl and heteroaryl boronic acids is reported. The sulfinate intermediates are converted in situ to the corresponding sulfonate esters using a copper-catalyzed oxidative process, providing a broad range of PFP esters in good yields.

Direct Copper-Catalyzed Three-Component Synthesis of Sulfonamides

First introduced into medicines in the 1930s, the sulfonamide functional group continues to be present in a wide range of contemporary pharmaceuticals and agrochemicals. Despite their popularity in the design of modern bioactive molecules, the underpinning methods for sulfonamide synthesis are essentially unchanged since their introduction, and rely on the use of starting materials with preinstalled sulfur-functionality. Herein we report a direct single-step synthesis of sulfonamides that combines two of the largest monomer sets available in discovery chemistry, (hetero)aryl boronic acids and amines, along with sulfur dioxide, using a Cu(II) catalyst, to deliver a broad range of sulfonamides. Sulfur dioxide is provided by the surrogate reagent DABSO. The reaction tolerates broad variation in both coupling partners, including aryl, heteroaryl and alkenyl boronic acids, as well as cyclic and acyclic alkyl secondary amines, and primary anilines. We validate the method by showing that a variety of drugs, and drug-fragments, can be incorporated into the process.

Size-tunable ZnO nanotapes as an efficient catalyst for oxidative chemoselective C[sbnd]B bond cleavage of arylboronic acids

Herein, we report a simple but effective chemical approach for the synthesis of size-tunable ZnO nanotapes by precipitation method in the presence of phytochemicals present in the flower extract of Lantana camara plant. The electron microscopic study confirmed that the size of ZnO nanotapes can be systematically controlled by varying the concentration of either flower extract or metal ions and the flower extract played the key role in controlling the growth of ZnO nanotapes. The phase and crystalline analysis was carried out by X-ray diffraction method which indicated that ZnO nanostructures are highly crystalline in nature and are free from any impurities. The synthesized ZnO nanostructures exhibited interesting optical properties as investigated by UV–vis absorption and photoluminescence spectroscopy. Further the surface functionalities affect the optical properties of ZnO nanostructures which possess relatively strong UV emissions; a blue emission and a green emission. The synthesized ZnO nanostructures showed excellent catalytic properties in the ipso-hydroxylation of different aryl/ hetero-arylboronic acid to phenol in a relatively greener reaction conditions. These catalysts are highly stable and are re-usable upto six cycles of ipso-hydroxylation without losing its catalytic properties.