Heavy Weight Research Articles

Grip strength of law enforcement officers and its implications

Grip strength (GS) plays a vital role for law enforcement officers (LEOs). This study aimed to establish a baseline for LEO GS, compare it with the general population, determine the correlation between LEO GS and body dimensions, and evaluate the implications for occupational performance. A total of 756 male and 218 female LEOs from across the U.S. participated in the study. On average, male LEOs exhibit stronger GS (49.53 kg) than female officers (32.14 kg). Significant differences between LEOs and the general population were observed. GS correlated with hand breadth, hand length, stature, and bideltoid breadth. Approximately 26%–46% of males and 5%–39% of females were identified as being at risk of health, fit, or occupational performance based on their measured GS. Enhancing GS training or avoiding implementing heavy equipment (such as pistols with heavy trigger weight), could improve officer occupational performance, safety, or health.

Light weights are as effective as heavy weights for muscle activation in the Hammerobics exercise.

We previously reported that a Hammerobics exercise using weights can enhance trunk and lower extremity muscles, some studies suggested that training effects could also be expected without heavy weights. If the muscle activity induced by Hammerobics swinging with a 'light plastic ball' equals or surpasses that of the isometric static squat and synchronized squat with a heavy ball, this training approach could alleviate joint strain, fostering an exercise regimen universally accessible across generations, benefit for workouts sports and rehabilitation. Fifteen healthy men participated in this study. By using surface electromyography, muscle activities for the abductor hallucis, tibialis anterior, tibialis posterior, peroneus longus, rectus femoris, biceps femoris long head, semitendinosus, gluteus maximus, multifidus, and internal oblique muscles were measured during a light Hammerobics synchronized squat (HSS-light), Hammerobics synchronized squat, and conventional isometric squat, and statistically compared. The front-to-back tibialis anterior activity of HSS-light was significantly higher than that of conventional isometric squat. The activities of all other muscles, except for the multifidus, were not significantly different between these exercises in the front-to-back and back-to-front phases. Compared to the Hammerobics synchronized squat, the light Hammerobics synchronized squat showed no differences in front-to-back tibialis anterior, rectus femoris, biceps femoris long head, and internal oblique activities and back-to-front abductor hallucis, tibialis anterior, rectus femoris, and internal oblique activities. The HSS-light could stimulate muscles to the same level as the conventional isometric squat without weight bearing. While the HSS-light was less effective than the Hammerobics synchronized squat, there was no significant difference in internal oblique, rectus femoris, and tibialis anterior activities between these exercises. Hence, the HSS-light is an exercise method that can be viable approach to promoting accessible workouts sports and rehabilitation.

Investigation of dynamic effect of rapid impact compaction

Dynamic compaction is a soil improvement technique which involves the repeated application of an impact load to a contact area of the soil surface induced by heavy weights. Experimental measurements were prepared for evaluation of the ground wave propagation induced by the rapid impact compaction. Influence of increase of subsoil stiffness during compaction and terrain configuration were investigated. When the shear strength of soil is exceeded during the penetration of the compaction footing, increase of peak particle velocities is slower but still clearly visible along the measurement line. The peak particle velocity is damped by the subsoil below 5 mm s−1 within 40–50 m from the source of excitation. Attenuation radius is affected by the terrain configuration, when terrain elevations cause the increase of acceleration amplitudes. Rigid bodies in the ground, such as foundation structures, could have similar influence. Dominant frequencies are in the interval from 20 to 40 Hz regardless the distance from the source of excitation or the density of the treated subsoil. Obtained results are preferably related to the given boundary conditions. However, wave propagation pattern and change of its characteristics during densification of the subsoil are applicable at another construction sites considering their particularities.

Association of dietary iron intake with diabetic kidney disease among individuals with diabetes.

The current study investigated the correlation between dietary iron intake and diabetic kidney disease among diabetic adults. This cross-sectional study enrolled 8118 participants who suffered from diabetes from the National Health and Nutrition Examination Survey (NHANES) 1999-2018. Dietary iron intake was obtained from 24 h recall interviews, and diabetic kidney disease was defined as eGFR < 60 mL/min per 1.73 m2 or albumin creatinine ratio (ACR) ≥ 30 mg/g. Three weighted logistic regression models were utilized to investigate odd ratio (OR) and 95% CIs for diabetic kidney disease. Stratified analyses were performed by gender, age, BMI, HbA1c, hypertension status, and smoking status, and diabetes types. Among 8118 participants (51.6% male, mean age 61.3 years), 40.7% of participants suffered from diabetic kidney disease. With the adjustment of potential covariates, we found that ≥ 12.59 mg of dietary iron was related to a lower risk of diabetic kidney disease (OR = 0.78, 95% CI: 0.63 to 0.96; OR = 0.79, 95% CI: 0.63 to 0.98). In stratified analyses, higher iron intake was negatively related to diabetic kidney disease, especially among those who were male, < 60 years, those with hypertension, those with HbA1c < 7.0%, and those who were ex-smokers. The result remained robust in sensitivity analyses. We found that ≥ 12.59 mg of dietary iron is associated with a lower risk of diabetic kidney disease, especially in those who were male, younger, heavier weight, have better blood sugar control, and those who were ex-smokers.

Addressing localized thermal comfort needs of the human body through advanced personal thermal management garments design and evaluation

Personal thermal management clothing has garnered significant attention in recent years for offering innovative solutions to address extreme environments. By examining the “human-clothing-environment” system, we have analyzed the contribution and developmental trajectory of personal thermal management clothing, considering the diverse human needs and application environments. Local variations in human physiology necessitate localized thermal comfort solutions provided by personal thermal management clothing. Despite advancements, many Personal thermal management garments still encounter challenges such as bulky size, heavy weight, intricate donning process, subpar performance, limited temperature control, and low durability. Furthermore, aspects like comfort, ergonomics, and aesthetics, tailored to specific usage scenarios, have often been overlooked. Enhancing the standardized design and evaluation processes for personal thermal management clothing items is crucial to better cater to individual preferences and usage demands, offering recommendations for development to align with individual requirements, enhance effectiveness, and promote energy conservation.

The structural organization of the outer tissues in the gametophytic stem of the umbrella moss Hypnodendron menziesii optimizes load bearing.

The ultrastructural design and biochemical organization of the significantly thickened outer tissues of the gametophytic stem of Hypnodendron menziesii optimizes load bearing of the stem. Hypnodendron menziesii is a bryoid umbrella moss growing in high humid conditions on the forest floors of New Zealand. The erect gametophyte bears up to eight whorls of branches in succession, spreading across the stem that bears the heavy weight of branches with highly hydrated leaves. Our investigation using a combination of light microscopy, transmission electron microscopy (TEM), scanning electron microscopy (SEM), and TEM-immunolabeling techniques provided novel information on the structural design and biochemical organization of greatly thickened cell walls of epidermal, hypodermal, and outermost cortical tissues, comparing underlying thin-walled cortical tissues in the gametophytic stem. Probing into the ultrastructure of the cell wall architecture of these target tissues by TEM and SEM revealed the cell walls to display a multilamellar organization, in addition to demonstrating the presence of an electron-dense substance in the cell wall, presumably flavonoids. The pattern of distribution and concentration of rhamnogalacturonan, homogalacturonan, and heteromannan, as determined by immunogold labeling, suggests that it is the combination of structural and molecular design of the cell wall that may optimize the mechanical function of the epidermal, hypodermal, and outer cortical tissues. Statistical relationships between the overall thickness of epidermal, hypodermal, and outer cortical cell walls, the lumen area of cells and the percentage area of cell wall occupied in these tissues at different heights of the stem, and thickness of secondary cell wall layers (L1-L4/5) were explored. The results of these analyses unequivocally support the contribution of outer tissues to the mechanical strength of the resilient stem.

Hot Carcass Fabrication Intervention for Managing Top Round Quality in Heavy Weight Beef Carcasses

Chilling-related meat quality issues have been observed in the deep portion of the top round due to the increase of average beef carcass size. The current study examines the impact of an alternative fabrication method aimed at alleviating top round quality in heavy weight beef carcasses (n = 11; 510 kg average weight). Prior to rigor, the knuckle subprimal was partially fabricated to expose the femur on alternating sides of each carcass (TRT), and each adjacent intact side served as a control (CON). All sides were air chilled (2°C) for 48 h before further fabricating. Temperature loggers placed at approximately 2.54 cm below the top round surface was the superficial (SP) location while loggers for the deep (DP) location were inserted at the midline sagittal center of the round until in contact with the femur bone. Temperature and pH decline were monitored for 48 h. The top rounds were collected, aged under vacuum packaging until 14 d postmortem, and then cut into steaks (2.54 cm). Each steak was separated into SP and DP portions and subjected to Warner-Bratzler shear force (WBSF), consumer sensory panel, and a 3-d retail display analysis which included lipid oxidation and objective color evaluation. The TRT accelerated the rate of temperature decline at the DP location (P &amp;lt; 0.001) and increased the pH decline rate at the SP location (P = 0.029). Retail day and location were more impactful than TRT on objective color traits. SP steaks were more tender (P = 0.001) than DP steaks. Consumer taste panel indicated TRT improved overall acceptability (P = 0.042) and flavor (P = 0.035) of top round steaks regardless of locations. TRT accelerated top round DP chilling rate and elevated steak palatability attributes. Findings of the present study report an improvement of top round steaks due to the innovative fabrication treatment.

(Digital Presentation) Innovative Cylindrical Cell Design for Sustainable Static Zinc-Bromine Battery Technology

Zinc-bromine flow batteries (ZBFBs) are suitable for large-scale stationary energy storage applications due to their scalability, flexibility, safety, and sustainability [1, 2]. However, the ZBFBs' efficiency is compromised by the heavy accessories and pumps involved in flowing electrolytes on the electrode surface [3]. Because of their heavy weight and other accessories, ZBFBs can only be used for large energy storage systems. Further research is required to expand the application fields of the small-scale static zinc-bromine battery, including portable applications. Therefore, we proposed an innovative cylindrical cell design for a static zinc-bromine battery with a non-flowing liquid electrolyte that offers substantial improvements over existing zinc-bromine flow battery technology. This design aims to enhance coulombic efficiency and energy density, particularly targeting portable applications such as electric vehicles and E-bikes. Our battery configuration involves electrodes (carbon felt and carbon sponge) separated by a microporous separator for ionic migration. The liquid electrolyte, comprising zinc bromide, zinc chloride, potassium chloride, and 1-ethyl-1-methyl pyrrolidinium bromide, facilitates the electrochemical reaction. The battery's electrochemical process involves the plating of zinc ions at the anode and the formation of a bromine complex at the cathode during charging, with reverse reactions during discharge. The entire proposed static battery configuration is made of recyclable Polytetrafluoroethylene (PTFE) polymer, ensuring environmental sustainability. The anode comprises highly conductive graphene-coated carbon felt, while the cathode employs a graphene-coated high-surface-area carbon fiber sponge. Here, we aim to provide more details on the manufacturing methods for the assembly, emphasizing slurry preparation, electrode modification, and electrolyte concentration to achieve enhanced battery performance. With 96 % coulombic efficiency and stable cyclability, the present technology outperforms the existing commercial zinc-bromine battery. Comparative analyses with conventional zinc-bromine flow batteries highlight the advantages of this static battery, including its compactness, reduced weight, and potential for higher energy density. This research represents a significant step towards developing static zinc-bromine batteries suitable for widespread use in portable applications, surpassing the limitations of current zinc-bromine battery technologies.

Physicochemical Quality Properties of Peach (Prunus Persica L.) Varieties at Holeta, Ethiopia

Holeta has different peach fruit varieties that can be used for various purposes. However, their fruit quality characteristics were not fully identified. Studies have indicated that the physicochemical qualities of peach fruits are influenced by a number of factors, with the varietal factor being one of the most important. Limited information regarding the factors that affect these qualities is available in the country, specifically at Holeta. Therefore, this study was initiated to evaluate the physicochemical quality properties of peach fruit varieties. Their physical quality traits, such as fruit length, fruit diameter, fruit shape index, and average fruit weight, as well as chemical quality parameters, such as TSS, specific gravity, TA, ripening index, ascorbic acid content, and pH, were evaluated. The results revealed that both physical and chemical quality parameters were significantly affected by varietal factors. Among, the Bonny Gold variety had the longest fruit length, and Florida down had the largest fruit diameter. As far as average fruit weight is concerned, 88-18 W had the heaviest weight with 111.98 g, while Transvalia had the highest TSS and specific gravity. However, the Summersun and 9A-35C varieties had the highest TA and ripening index, respectively. Thus, the physicochemical quality properties of the fruit were highly altered with peach varieties.

Teaching Innovation of University Grade in Automotive Engineering

In this work, we present the implementation of a flipped classroom methodology in two engineering courses, both with a heavy weight given to problem solution. In class, the students are first evaluated by a test, in order to encourage them to see the videos. In one course the test is gamified, while not in the other, so that the different level of encouragement can be assessed. Then conceptual problems are proposed to help the students think and discuss about the theoretical background. Finally, the problem sessions are approached seeking an active involvement by the students. The aim of this methodology is to facilitate a deeper learning of the needed theoretical background, an issue in which students struggled due to lack of motivation and the student's ability to access information during their study. The results of the methodology are evaluated by using standard questioners passed to the students. Answers were obtained from 31 students, which corresponds to 40 % of all involved students. The results obtained showcase an improvement of student motivation and learning. Key aspects identified leading to the success are a good organization of the curse, the adaptation of all activities to form a coherent course and the active and approachable attitude showcased by the teachers.

Redox and Energy Homeostasis Enabled by Photocatalytic Material-Microbial Interfaces.

Material-microbial interfaces offer a promising future in sustainable and efficient chemical-energy conversions, yet the impacts of these artificial interfaces on microbial metabolisms remain unclear. Here, we conducted detailed proteomic and metabolomic analyses to study the regulations of microbial metabolism induced by the photocatalytic material-microbial interfaces, especially the intracellular redox and energy homeostasis, which are vital for sustaining cell activity. First, we learned that the materials have a heavier weight in perturbing microbial metabolism and inducing distinctive biological pathways, like the expression of the metal-resisting system, than light stimulations. Furthermore, we observed that the materials-microbe interfaces can maintain the delicate redox balance and the energetic status of the microbial cells since the intracellular redox cofactors and energy currencies show stable levels as naturally inoculated microbes. These observations ensure the possibility of energizing microbial activities with artificial materials-microbe interfaces for diverse applications and also provide guides for future designs of materials-microbe hybrids to guard microbial activities.

Hubungan Dukungan Suami, Aktivitas Fisik, Dan Stress Pada Ibu Hamil Trimester 1 Terhadap Kejadian Hyperemesis Gravidarum Di TPMB Yunita

Introduction: Hyperemesis gravidarum is excessive nausea and vomiting so that daily work is disrupted and the general condition becomes worse. Nausea and vomiting are the most common disorders encountered in the first trimester of pregnancy, around 60-80% of primigravidas and 40-60% of multigravidas experience nausea and vomiting but these symptoms become more severe only in 1 out of 1,000 pregnancies. Husband's support, physical activity, and stress influence the incidence of hyperemesis gravdiarum. This study aimed to determine the relationship between husband's support, physical activity, and stress in first-trimester pregnant women to the incidence of hyperemesis gravidarum at TPMB Yunita in 2023. Methods: The research method used an analytic descriptive design with a cross-sectional approach. The sampling technique was total sampling with 30 first-trimester pregnant women. Results: The results showed that there was a relationship between the husband's support (p-value 0,005); physical activity (p-value 0,001); and stress (p-value 0.002) to the incidence of hyperemesis gravidarum. Discussion: The study concludes a relationship between husband's support, physical activity, and stress in trimester I pregnant women to the incidence of hyperemesis gravidarum at TPMB Yunita in 2023. Suggestions for pregnant women are expected to be able to manage the physical activity carried out to be of higher quality and not too excessive during pregnancy by limiting activities that are too strenuous such as doing housework continuously and lifting heavy weights.

Force reserve predicts compensation in reaching movement with induced shoulder strength deficit.

Following events such as fatigue or stroke, individuals often move their trunks forward during reaching, leveraging a broader muscle group even when only arm movement would suffice. In previous work, we showed the existence of a "force reserve": a phenomenon where individuals, when challenged with a heavy weight, adjusted their motor coordination to preserve approximately 40% of their shoulder's force. Here, we investigated if such reserve can predict hip, shoulder, and elbow movements and torques resulting from an induced shoulder strength deficit. We engaged 20 healthy participants in a reaching task with incrementally heavier dumbbells, analyzing arm and trunk movements via motion capture and joint torques through inverse dynamics. We simulated these movements using an optimal control model of a 3-degree-of-freedom upper body, contrasting three cost functions: traditional sum of squared torques, a force reserve function incorporating a nonlinear penalty, and a normalized torque function. Our results demonstrate a clear increase in trunk movement correlated with heavier dumbbell weights, with participants employing compensatory movements to maintain a shoulder force reserve of approximately 40% of maximum torque. Simulations showed that while traditional and reserve functions accurately predicted trunk compensation, only the reserve function effectively predicted joint torques under heavier weights. These findings suggest that compensatory movements are strategically employed to minimize shoulder effort and distribute load across multiple joints in response to weakness. We discuss the implications of the force reserve cost function in the context of optimal control of human movements and its relevance for understanding compensatory movements poststroke.NEW & NOTEWORTHY Our study reveals key findings on compensatory movements during upper limb reaching tasks under shoulder strength deficits, as observed poststroke. Using heavy dumbbells with healthy volunteers, we demonstrate how forward trunk displacement conserves around 40% of shoulder strength reserve during reaching. We show that an optimal controller employing a cost function combining squared motor torque and a nonlinear penalty for excessive muscle activation outperforms traditional controllers in predicting torques and compensatory movements in these scenarios.

Assessment of mechanical performance of electrically conductive asphalt pavements using accelerated pavement testing

ABSTRACT Electrically Conductive Asphalt (ECA) pavements are a promising technology for preventing snow and ice accumulation on roadways. This study assesses the mechanical performance of ECA pavements using Accelerated Pavement Testing (APT). Three pavement test strips were constructed in New Jersey: a traditional asphalt layer as test strip-I, an ECA mastic prepared using a combination of asphalt binder and conductive fibres (strip-II), and an ECA-HPTO (high performance thin overlay mixture) layer containing graphite and carbon fibres (strip-III). Each test strip was instrumented with asphalt strain gauges (ASGs), pressure cells, and thermocouples to evaluate the structural responses. A Heavy Vehicle Simulator (HVS) was used to apply 300,000 passes on each test strip using a 40-kN truck tire. The structural integrity of the test strips was evaluated by conducting Heavy Weight Deflectometer (HWD) testing before and after HVS loading. Data from the ASGs revealed that strip III exhibited the highest cracking resistance (nearly 2 times less tensile strain). The rut depths in all test strips were negligible (less than 2 mm). ECA mastic and steel electrodes in the ECA layer impact the structural integrity of test strips, with variations in HWD deflection behaviour indicating the role of electrode spacing in maintaining pavement stability.

Effects of β-carotene supplementation and age on the oxidative status, production and reproductive performance of grazing ewes

Context There is some evidence that physiological stages such as breeding, pregnancy, parturition and lactation may trigger oxidative stress. It has also been observed in several species, including sheep, that age affects their vulnerability to oxidative stress. Aims This study investigated the effects of supplemental β-carotene and age on the oxidative status of grazing ewes around breeding, pregnancy, parturition and early lactation as well as on their production and reproduction performance. Methods Hundred and four ewes were divided into two broad age groups (young = 1–3 years, and old = 4–6 years). Within age groups, ewes of similar age were randomly assigned to four treatment groups (A1, A2, A3, C) by using a completely randomised block design. The young (n = 13) and old (n = 13) sheep in Groups A1, A2 and A3 were daily drenched with 100 mg, 75 mg and 50 mg β-carotene respectively. Group C was unsupplemented (Control). Supplementation lasted 28 days before oestrus synchronisation; 14 days during oestrus synchronisation (CIDR) and hand-mating; 18 days post-hand-mating; 30 days before lambing; and 15 days after lambing. All animals were grazed on Kikuyu grass (Pennisetum clandestinum). Six ewes from each group (total = 24) were sampled for blood to measure oxidative and hormonal status during the experiment. Key results Supplemental β-carotene at ≥75 mg/day may act as a pro-oxidant in ruminants under oxidatively stressed conditions such as parturition. Age did not affect the ewes’ oxidative status. The supplemental β-carotene did not affect bodyweight, oestrus parameters, corpus luteum size, conception rate and litter size. Except for a tendency of lambs from supplemented ewes to have heavier weight at 15 days old (P = 0.080), age group and supplemental β-carotene did not affect the lamb mortality rate or weight at birth or 15 days old. Older ewes showed earlier and longer duration of oestrus than did younger ewes. Conclusions Supplementation of grazing ewes with β-carotene should not be ≥75 mg/day, especially at parturition period, because it may work as a pro-oxidant. The older ewes seem to have earlier oestrus with a longer duration than do the younger ones. Implications Caution is urged when administering high doses of β-carotene to ewes during the peri-parturient period.

Penatalaksanaan Fisioterapi Pada Kondisi Drop Foot Bilateral dengan Modalitas Infra Red, TENS dan Terapi Latihan

Drop Foot is someone who is unable to lift the front foot when walking. This incident is reported to be around 19 per 100,000 people or 1% to 2% of all diagnosed sufferers. The aim of this research is to determine the management of physiotherapy with pain problems, limited range of motion of joints and decreased muscle strength. These problems are the reason researchers use selected modalities such as Infra Red, TENS and exercise therapy in the form of an ankle pump from February to March at the Bagas Waras Regional Hospital, Klaten. Collecting case study data on physiotherapy treatment using Infra Red modalities, TENS and exercise therapy in the form of an Ankle pump which resulted in reducing pressure pain in the 6th therapy (T6) to 1 from 4 (T0), increasing the range of joint movement by 5° at each meeting on the left side, as well as increasing muscle strength at the 6th therapy (T6) to a value of 3 from 1 (T0). Researchers advise the public to reduce activities such as lifting heavy weights in order to reduce the occurrence of spondylosis so that the number of Drop Foot cases does not continue to increase.

Subjective Speech Intelligibility Drives Noise-Tolerance Domain Use During the Tracking of Noise-Tolerance Test.

Recently, the Noise-Tolerance Domains Test (NTDT) was applied to study the noise-tolerance domains used by young normal-hearing (NH) listeners during noise acceptance decisions. In this study, we examined how subjective speech intelligibility may drive noise acceptance decisions by applying the NTDT on NH and hearing-impaired (HI) listeners at the signal to noise ratios (SNRs) around the Tracking of Noise-Tolerance (TNT) thresholds. A single-blind, within-subjects design with 22 NH and 17 HI older adults was followed. Listeners completed the TNT to determine the average noise acceptance threshold (TNTAve). Then, listeners completed the NTDT at the SNRs of 0, ±3 dB (re: TNTAve) to estimate the weighted noise-tolerance domain ratings (WNTDRs) for each domain criterion. Listeners also completed the Objective and Subjective Intelligibility Difference (OSID) Test to establish the individual intelligibility performance-intensity (P-I) functions of the TNT materials. All test measures were conducted at 75 and 82 dB SPL speech input levels. NH and HI listeners were tested in the unaided mode. The HI listeners were also tested using a study hearing aid. The WNTDRs were plotted against subjective speech intelligibilities extrapolated from individual P-I of the OSID at the SNRs corresponding to NTDT test conditions. Listeners were grouped according to their most heavily weighed domain and a regression analysis was performed against listener demographics as well as TNT and OSID performances to determine which variable(s) affected listener grouping. Three linear mixed effects (LMEs) models were used to examine whether WNTDRs changed with subjective speech intelligibility. All three LMEs found significant fixed effects of domain criteria, subjective intelligibility, and speech input level on WNTDRs. In general, heavier weights were assigned to speech interference and loudness domains at poorer intelligibility levels (<50%) with reversals to distraction and annoyance at higher intelligibility levels (>80%). The comparison between NH and HI-unaided showed that NH listeners assigned greater weights to loudness than the HI-unaided listeners. The comparison between NH and HI-aided groups showed similar weights between groups. The comparison between HI-unaided and HI-aided found that HI listeners assigned lower weights to speech interference and greater weights to loudness when tested in aided compared with unaided modes. In all comparisons, loudness was weighed heavier at the 82 dB SPL input level than at the 75 dB SPL input level with greater weights to annoyance in the NH versus HI-unaided comparison and lower weights to distraction in the HI-aided versus HI-unaided comparison. A generalized linear model determined that listener grouping was best accounted for by subjective speech intelligibility estimated at TNTAve. The domain criteria used by listeners were driven by their subjective speech intelligibility regardless of their hearing status (i.e., NH versus HI). In general, when subjective intelligibility was poor, the domains of speech interference and loudness were weighed the heaviest. As subjective intelligibility improved, the weightings on annoyance and distraction increased. Furthermore, a listener's criterion for >90% subjective speech understanding at the TNTAve may allow one to profile the listener.

Ultrasonic weldability of thick and heavier nonwoven fabrics

AbstractNonwovens have wide application areas due to their advantageous properties like low cost, high production efficiency, and tuneable properties. They are mostly used for disposable products. Combining bicomponent fiber spinning with hydroentanglement method is one of the innovative methods to obtain nonwovens for durable applications. On the other hand, ultrasonic welding is an alternative assembling method for disposable products made of low weight nonwovens. In this study, the ultrasonic weldability of relatively heavier weight and thicker nonwoven fabrics made of polyester: polyamide bicomponent microfilaments were examined in order to combine the advantages of nonwovens and ultrasonic welding. Relatively higher thickness and weight, and also fiber composition of the nonwoven fabrics were compelling effects of the study that drove the motivation. Overall 60 samples were produced using five nonwoven fabrics with varying unit masses and 12 selected ultrasonic welding types. Seam strength and strain assessments were supported with stereomicroscope and visual inspections in evaluating the welds. Results showed that despite having thick seam lines up to 1.6 mm, successful welded seams could be obtained. Depending on the welding parameters, seam lines of some samples exhibited waviness, color changes, and deformations but these situations did not drastically affect the seam strength of samples.

Development of Lead-Free Materials for Radiation Shielding in Medical Settings: A Review.

Radiation protection is an essential issue in diagnostic radiology to ensure the safety of patients, healthcare professionals, and the general public. Lead has traditionally been used as a shielding material due to its high atomic number, high density, and effectiveness in attenuating radiation. However, some concerns related to the long-term health effects of toxicity, environmental disease as well as heavy weight of lead have led to the search for alternative lead-free shielding materials. Leadfree multilayered polymer composites and non-lead nano-composite shields have been suggested as effective shielding materials to replace conventional lead-based and single metal shields. Using several elements with high density and atomic number, such as bismuth, barium, gadolinium, and tungsten, offer significant enhancements in the shielding ability of composites. This review focuses on the development and use of lead-free materials for radiation shielding in medical settings. It discusses the drawbacks of traditional lead shielding, such as toxicity, weight, and recycling challenges, and highlights the benefits of lead-free alternatives.

The Effect of ‘Heavy’ Recipient on the Ditransitive Constructions in Five Languages

The study of ditransitive constructions often focuses on factors that influence their encoding, with the "end-weight" principle playing a key role in organizing informational structure. "End-weight" refers to "a tendency to reserve the final position for the more complex parts of a clause or sentence". This study delves into the effects of the recipient’s heavy weight on the encoding of ditransitive patterns in five languages, aiming to uncover both similarities and differences. Our findings indicate that the recipient’s heavy weight significantly influences the encoding of ditransitive patterns in Mandarin and English. In contrast, Cantonese, Japanese, and German consistently maintain their canonical patterns regardless of the recipient’s heavy weight, running counter to the end-weight principle. These insights significantly enhance our typological understanding of ditransitive constructions. Future research should focus on empirical and theoretical exploration to elucidate the motivations behind these linguistic differences.