Heavy Metals Research Articles

Heavy Metal Content in the Soil of Baiji Refinery and Surrounding Area, Controlling its Distribution Factors

This study was conducted to analyze the presence of heavy metals within the soil inside and around Baiji Oil Refinery and their factors that control the spatial distribution of metals in soils existed as (organic matter (OM), iron-manganese, pH, clay minerals). In this study, geochemical analysis of Baiji Oil Refinery soil and nearby areas was conducted by Atomic Absorption Spectrophotometer (AAS). Twenty two samples were analysed in which the results showed heavy metal as (Cd, Pb, Cr, Ni, Fe, Mn, Zn and Cu) concentrations that most of these metals were found to be higher than their global limits in the soil, except (Fe, Mn and Zn) found to be within those limits. Controlling factors were conducted for six samples, three of highest concentrations and three of lowest one. The results reveal that the mean concentration of OM in the highest concentrations was 1.64% while the lowest concentrations was 1.59%, the mean concentration of Fe-Mn was in the highest concentrations 23380-359 ppm and in the lowest samples was 11304-114 ppm, respectively. The mean concentration for the pH in the highest concentrations was 8.5 and for the samples within the lowest concentrations was 7.9. However, the mean clay for the samples within the highest concentration were 1.04%, whereas the samples within the lowest concentration were 1.48%. The results showed that the controlling factors did not affect the soil heavy metal distribution of Baiji Oil Refinery and their nearby areas. Therefore, such results indicate the role of industrial processes (oil industries) in increasing the concentration of heavy metals in the soils in addition to the elements inherited from the parent rocks.

Comparative Study of Biosorption and Traditional Methods for Heavy Metal Removal from Industrial Wastewater in Panipat

In this research paper, I have thoroughy described about the topic Comparative Study of Biosorption and Traditional Methods for Heavy Metal Removal from Industrial Wastewater in Panipat.” Industrial wastewater contamination by toxic heavy metals poses a significant environmental threat globally, especially in rapidly industrializing regions like Panipat District in Haryana, India. Panipat, renowned for its extensive textile and chemical industries, generates substantial volumes of wastewater laden with heavy metals such as lead (Pb), cadmium (Cd), and mercury (Hg). Recent studies have revealed that the concentrations of these metals in Panipat's industrial effluents frequently surpass the permissible limits set by environmental regulations. Traditional methods for heavy metal removal, including chemical precipitation and ion exchange, are widely utilized but often entail high operational costs and the generation of secondary pollutants like sludge. Biosorption, an emerging and sustainable technology, offers a promising alternative by utilizing biological materials such as algae, bacteria, and agricultural waste to adsorb heavy metals from wastewater. This study aims to investigate the effectiveness, cost-effectiveness, and environmental impact of biosorption compared to traditional methods in Panipat District. By examining heavy metal removal efficiencies, conducting cost analysis, and assessing environmental implications, this research seeks to provide valuable insights into sustainable wastewater treatment practices.

Nickel phytoremediation potential of Plantago major L.: Transcriptome analysis

Plantago major L, a ubiquitous perennial weed thriving in diverse harsh environments, possesses a substantial reservoir of resistance genes, particularly those conferring resistance to heavy metals. Despite its prevalence, the intricate molecular mechanisms underpinning its exceptional ability to endure heavy metal pollution remain largely unexplored. Through transcriptome analysis, this study intended to reveal the mechanisms behind the enrichment of heavy metal Ni (nickel) in P. major and its potential for phytoremediation. In total, 7848 differentially expressed genes (DEGs) exhibited dynamic changes in tissues treated with different Ni concentrations. It was discovered that the root of P. major exhibited a more pronounced and significant response when exposed to higher concentrations of Ni. Furthermore, the upregulated genes associated with adversity stress were significantly observed in response to Ni stress. The majority of pathways related to plant growth and photosynthesis were significantly reduced; however, pathways related to metabolite synthesis, chitin synthesis, and adversity signal transduction were stimulated, and pathways related to root cell wall organization or biogenesis were suppressed. We identified that the rate-limiting enzyme PmHISN1A/B in the histidine synthesis pathway significantly enhanced Ni tolerance of the transgenic Arabidopsis without side effects, which was different to its Arabidopsis homologs. The study uncovered a molecular basis for the Ni tolerance of P. major, a heavy metal remediation plant, and provided potential genetic resources to cultivate novel P. major varieties or breed stress resilience crops.

Biosorption of Pb2+, Cd2+ and Zn2+ from aqueous solutions by Agrobacterium tumefaciens S12 isolated from acid mine drainage

Heavy metal pollution is a global environmental issue, and microorganisms play a crucial role in the bioremediation of heavy metal-contaminated wastewater. The study isolated heavy metal-resistant bacterium and observed their absorption ability toward Pb2+, Cd2+ and Zn2+. We isolated Agrobacterium tumefaciens S12 from acid mine drainage. The various factors influencing its adsorption performance, including pH, biomass dosage, initial metal ion concentration, and adsorption temperature, were investigated in detail. Chemisorption controls the adsorption rate due to the results better fitted by pseudo-second order kinetics. The maximum adsorption capacities of Pb2+, Cd2+ and Zn2+ on A. tumefaciens S12 were 234, 58 and 51 mg g−1 at 30 °C from Langmuir isotherm, respectively. The adsorption processes for the three heavy metal ions were spontaneous and exothermic in nature. In bimetallic systems, biosorption of Pb2+ ions was preferential to that of Cd2+ and Zn2+. Furthermore, scanning electron microscopy coupled to energy dispersive spectroscopy, Fourier-transform infrared spectra and X-ray photoelectron spectroscopy analysis demonstrated that the adsorption mechanisms include ion-exchange, complexation interaction between the heavy metal ions and the functional groups on the surface of biomass. The obtained results indicated that A. tumefaciens S12 can be applied as an efficient biosorbent in bioremediation technology to sequestrate heavy metal ions from aqueous solution.

Assessment of Heavy Metal (Zinc, Copper, Lead and Cadmium) Contamination in Common Edible Shellfish Species of the Hooghly River and Sunderbans, India

The content of four heavy metals (Zinc, Copper, Lead and Cadmium) in muscles of three shell fish species - prawns -Penaeus monodon and Penaeus indicus and crabs-Scylla serrata, the most prime shellfish food resources of human in the domestic and international market were studied at four stations in the estuarine belt near Bay-of-Bengal which receives wastes of various types from industries and various anthropogenic activities. The samples were digested by acid digestion. The metal contents were quantified using an AAS (Atomic absorption spectrophotometer). The distribution of trace metals accumulated in the muscle tissues of the above mentioned species was in the order- Zn > Cu> Pb> Cd. In the present study, levels of Zinc in the shell fishes ranged from 07.44±0.65 to 128.10 ±2.96 ; Cu ranged from 5 ±0.15 to 99.14 ±1.31; Pb varied from 1.67± 0.14 to 23.99 ± 0.79 and Cd ranged from 1.29± 0.35 to 7.09 ± 0.80.The concentration of the four metals exhibited spatial variation as station 1 >station 2 > station 3 > station 4, which could be a reflection of different bioavailability of metal concentrations in the water body at different stations. The results obtained showed that the metal concentrations in most of the cases were above the threshold value recommended by WHO. Metals such as Cu, Zn, Pb, Cd, can affect various aquatic organisms as well as human being either directly or indirectly as they can enter into the food chain and may be biomagnified at higher trophic levels which is one of the top concerns for human health. Essential heavy metals such as Zinc and Copper are relatively less harmful at low concentration while non-essential metals such as Cd and Pb are highly toxic even at low concentrations.

Honey Enriched with Additives Alleviates Behavioral, Oxidative Stress, and Brain Alterations Induced by Heavy Metals and Imidacloprid in Zebrafish

Environmental concerns have consistently been a focal point for the scientific community. Pollution is a critical ecological issue that poses significant threats to human health and agricultural production. Contamination with heavy metals and pesticides is a considerable concern, a threat to the environment, and warrants special attention. In this study, we investigated the significant issues arising from sub-chronic exposure to imidacloprid (IMI), mercury (Hg), and cadmium (Cd), either alone or in combination, using zebrafish (Danio rerio) as an animal model. Additionally, we assessed the potential protective effects of polyfloral honey enriched with natural ingredients, also called honey formulation (HF), against the combined sub-chronic toxic effects of the three contaminants. The effects of IMI (0.5 mg·L−1), Hg (15 μg·L−1), and Cd (5 μg·L−1), both individually and in combination with HF (500 mg·L−1), on zebrafish were evaluated by quantifying acetylcholinesterase (AChE) activity, lipid peroxidation (MDA), various antioxidant enzyme activities like superoxide dismutase and glutathione peroxidase (SOD and GPx), 2D locomotor activity, social behavior, histological and immunohistochemical factors, and changes in body element concentrations. Our findings revealed that all concentrations of pollutants may disrupt social behavior, diminish swimming performances (measured by total distance traveled, inactivity, and swimming speed), and elevate oxidative stress (OS) biomarkers of SOD, GPx, and MDA in zebrafish over the 21-day administration period. Fish exposed to IMI and Hg + Cd + IMI displayed severe lesions and increased GFAP (Glial fibrillary acidic protein) and S100B (S100 calcium-binding protein B) protein expression in the optic tectum and cerebellum, conclusively indicating astrocyte activation and neurotoxic effects. Furthermore, PCNA (Proliferating cell nuclear antigen) staining revealed reduced cell proliferation in the IMI-exposed group, contrasting with intensified proliferation in the Hg + Cd group. The nervous system exhibited significant damage across all studied concentrations, confirming the observed behavioral changes. Moreover, HF supplementation significantly mitigated the toxicity induced by contaminants and reduced OS. Therefore, the exposure to chemical mixtures offers a more complete picture of adverse impacts on aquatic ecosystems and the supplementation with bioactive compounds can help to reduce the toxicity induced by exposure to environmental pollutants.

Contamination and health risk assessment of potentially toxic elements in rice (Oryza sativa) and soil from Ashanti Region.

Anthropogenic activities release potentially toxic elements into the environment, which contaminate the food chain. The main objective of this research was to analyze the concentrations of As, Cd, Cr, Hg, and Pb in rice grains and soils, establish their correlation and transfer factors between soil and rice grains as well as evaluate their human health risk from consumption of rice cultivated in the Asante Akim area. The levels of As, Cd, Cr, Hg, and Pb in soil and rice samples were assayed using an Agilent 7700 Series inductively coupled plasma-mass spectrophotometer. The mean heavy metal content in soil was 7.5, 0.52, 0.47, 1.30, and 8.69mg/kg for As, Cd, Cr, Hg, and Pb, respectively. Mean levels of the potentially toxic elements in rice were 0.082, 0.27, 0.48, 0.028, and 0.14mg/kg for As, Cd, Cr, Hg, and Pb, respectively. Soil pollution indices showed that the soils were unpolluted with the potentially toxic elements studied. The concentrations of the potentially toxic elements in rice were below the maximum allowable concentration (MAC) recommended by the Codex Alimentary Commission except Cd which was marginally higher than the MAC. Dietary exposure to the elements to consumers was assessed by comparing the estimated daily intake (EDI) to the provisional tolerable daily intake (PTDI). The estimated daily intake values for As, Cd, Cr, Hg, and Pb were 1.45 × 10-4, 4.8 × 10-4, 8.5 × 10-4, 4.95 × 10-5, and 2.4 × 10-4, respectively. The HQ for all the potentially toxic elements was less than the permissible value of 1, suggesting that the consumption of rice from the study area constitutes no potential non-carcinogenic health risk to the population. This study is unique because the risk is evaluated from rice that is directly consumed, and this gives a clearer picture of the risk to humans. Regular monitoring studies should be conducted to ascertain the levels of heavy metals in rice cultivated in the area since heavy metals can accumulate and the concentrations could increase to toxic levels with time.

Green and Mild Fabrication of Magnetic Poly(trithiocyanuric acid) Polymers for Rapid and Selective Separation of Mercury(II) Ions in Aqueous Samples

The removal and detection of highly toxic mercury(II) ions (Hg2+) in water used daily is essential for human health and monitoring environmental pollution. Efficient porous organic polymers (POPs) can provide a strong adsorption capacity toward heavy metal ions, although the complex synthetic process and inconvenient phase separation steps limit their application. Hence, a combination of POPs and magnetic nanomaterials was proposed and a new magnetic porous organic polymer adsorbent was fabricated by a green and mild redox reaction in the aqueous phase with trithiocyanuric acid (TA) and its sodium salts acting as reductive monomers and iodine acting as an oxidant. In the preparation steps, no additional harmful organic solvent is required and the byproducts of sodium iodine are generally considered to be non-toxic. The resulting magnetic poly(trithiocyanuric acid) polymers (MPTAPs) are highly porous, have large surface areas, are rich in sulfhydryl groups and show easy magnetic separation ability. The experimental results show that MPTAPs exhibit good adsorption affinity toward Hg2+ with high selectivity, rapid adsorption kinetics (10 min), a large adsorption capacity (211 mg g−1) and wide adsorption applicability under various pH environments (pH 2~8). Additionally, MPTAPs can be reused for up to 10 cycles, and the magnetic separation step of MPTAPs is fast and convenient, reducing energy consumption compared to centrifugation and filtration steps required for non-magnetic adsorbents. These results demonstrate the promising capability of MPTAPs as superior adsorbents for effective adsorption and separation of Hg2+. Based on this, the prepared MPTAPs were adopted as magnetic solid-phase extraction (MSPE) materials for isolation of trace Hg2+ from aqueous samples. Under optimized conditions, the extraction and quantification of trace Hg2+ in water samples were accomplished using inductively coupled plasma mass spectrometry (ICP-MS) detection after MSPE procedures. The proposed MPTAPs-based MSPE-ICP-MS method is efficient, rapid, sensitive and selective for the determination of trace Hg2+, and was successfully employed for the accurate analysis of trace Hg2+ in tap water, wastewater, lake water and river water samples.

Microstructural Evaluation and Linkage to the Engineering Properties of Metal-Ion-Contaminated Clay

The rapid progress of urbanization and industrialization has led to the accumulation of large amounts of metal ions in the environment. These metal ions are adsorbed onto the negatively charged surfaces of clay particles, altering the total surface charge, double-layer thickness, and chemical bonds between the particles, which in turn affects the interactions between them. This causes changes in the microstructure, such as particle rearrangement and pore morphology adjustments, ultimately altering the mechanical behavior of the soil and reducing its stability. This study explores the effects of four common metal ions, including monovalent alkali metal ions (Na+, K+) and divalent heavy metal ions (Pb2+, Zn2+), with a focus on how ion valence and concentration impact the soil’s microstructure and mechanical properties. Microstructural tests show that metal ion incorporation reduces particle size, increases clay content, and transforms the structure from layered to honeycomb-like. Small pores decrease while large pores dominate, reducing the specific surface area and pore volume, while the average pore size increases. Although cation exchange capacity decreases, cation adsorption density per unit surface area increases. Monovalent ions primarily disperse the soil structure, while divalent ions induce coagulation. Macro-mechanical tests reveal that metal ion contamination reduces porosity under loading, with compressibility rises as the ion concentration increases. Soils contaminated with alkali metal ions shows higher compression coefficients at all loads, while heavy metal ions cause higher compression under lower loads. Shear strength, the internal friction angle, and cohesion in metal-ion-contaminated clay decrease compared to uncontaminated field-state clay, with greater declines at higher ion concentrations. The Micropore Morphology Index and hydro-pore structural parameter effectively characterize both micro- and macrostructural properties, establishing a quantitative relationship between HPSP and the engineering properties of metal-ion-contaminated clay.

Waste refractory brick material added chitosan/oxidized pullulan complex gel production and removal of heavy metals from waste water

Wastewater is a by-product of numerous industrial processes that have been demonstrated to have adverse effects on human and natural health due to the pollutants it contains. The pollutants in these substances are organic or inorganic molecules and heavy metal ions that significantly harm the environment and human health. A variety of techniques have been devised for the removal of heavy metal ions from wastewater. The adsorption process has attracted significant attention due to its straightforward implementation, cost-effectiveness, and the environmentally friendly production of adsorbent materials using biocompatible substances. In this study, the removal of Cu2+ ions from wastewater was conducted using chitosan pullulan, a biocompatible and biodegradable polymer. In addition to chitosan and pullulan, waste refractory materials from a furnace used in iron and steel production were added to these polymer materials to increase the adsorption capacity. The initial step involved grinding the waste refractory brick material. Subsequently, chitosan was dissolved in acetic acid. After that, the refractory material was suspended in this solution, facilitating the formation of hydrogel beads using a NaOH solution. The obtained hydrogels were coated with pullulan to produce polyelectrolyte gel. Pullulan was oxidized to 6-carboxypullulan by the TEMPO (2,2,6,6-Tetramethylpiperidin-1-yl)oxyl) oxidation method and the negatively charged groups in its structure interacted with the positively charged groups in the chitosan structure to produce a complex gel. The chemical structure, morphological analysis, thermal analysis, and water release analysis of the produced waste refractory brick material added chitosan/oxidized pullulan complex gels were examined. The impact of the 6-carboxypullulan coating on the gels’ properties was elucidated. Furthermore, the adsorption of Cu2⁺ was conducted using solutions containing 100, 500, and 1000 ppm Cu2⁺ ions. It has been observed that the material can clean water with over 98% efficiency, even in solutions that exceed the standards set for wastewater. The material’s efficacy in cleaning solutions with concentrations above the standard for wastewater cleaning is evidence of its high performance. Furthermore, the kinetics and isotherm of the adsorption reaction were examined. The kinetics were determined to be consistent with the Pseudo Second Order (chemical reaction controlled) and aligned with the Langmuir and Freundlich Isotherm (mixed adsorption occurred on homogeneous and heterogeneous surfaces).

Nano Filtration Techniques in Waste Water Treatment

Nano filters, based on nanotechnology to improve filtration processes, offer sophisticated solutions for contaminant removal from liquids and gases. The filters in this group include polymeric membranes with a pore size of 1-100 nanometres, ceramic membranes that are tolerant to chemicals, and carbon nanotube and graphene-based filters with advancedpermeability and selectivity. Recently, differentiated nanomaterials have been developed to make composite membranes with improved performance and durability. However, NF have disadvantages such as membrane fouling and high production costs. In this respect, research is currently being done to come up with solutions to the challenges, optimize the integration of nanomaterials, and realize application possibilities in water treatment, air purification, and industrial processes. On the whole, NF stand as the radical improvement filtration technology has so far achieved, and further research is bound to make them more efficient and cheaper About 17–19 million people in the world lack access to clean water. It is estimated that about 3.4 million people die every year from water scarcity, sanitation, and hygiene-related problems out of which 99% of deaths occurin developing countries. In recent years, water contamination has become a global environmental concern. The paper providesinsights into advancements in wastewater treatment through nano-filters. The paper focuses on evaluating the effectiveness ofnanomembranes in removing containments such as inorganic salts, organic compounds, and heavy metals. Additionally, the paper gives information about performance based on a comparison of the tractional filters and RO in terms of flexibility, durability, efficiency, and cost-effectiveness. Furthermore, it explores the application of NF in industries such as textile, pharmaceuticals, and agriculture and evaluates the versatility and effectiveness in these sectors.

Heavy-Metal Ions Control on PFAS Adsorption on Goethite in Aquatic Systems.

Per- and polyfluoroalkyl substances (PFAS) are ubiquitous environmental contaminants that often co-occur with heavy metals. Despite their prevalence, the mobility of PFAS in complex, multicomponent systems, particularly at the molecular scale, remains poorly understood. The vast diversity of PFAS and their low concentrations alongside anthropogenic and natural substances underscore the need for integrating mechanistic insights into the sorption models. This study explores the influence of metal cations (Cu(II), Cd(II), and Fe(II)) on the adsorption of four common PFAS (PFOA, PFOS, PFDA, and GenX) onto goethite (α-FeOOH), a common iron (oxyhydr)oxide in both aquatic and terrestrial environments. PFAS adsorption was highly dependent on the PFAS type, pH, and metal ion concentration, with a surface complexation model effectively predicting these interactions. Cu(II) and Cd(II) enhanced PFOS and PFDA adsorption via ternary complexation while slightly reducing PFOA and GenX adsorption. Under anoxic conditions, Fe(II) significantly increased the adsorption of all PFAS, showing reactivity greater than those of Cu(II) and Cd(II). Additionally, natural organic matter increased PFAS mobility, although metal cations in groundwater may counteract this by enhancing PFAS retention. These findings highlight the key role of metal cations in PFAS transport and offer critical insights for predicting PFAS behavior at oxic-anoxic environmental interfaces.

Integrated Assessment and Agricultural Planning in Selenium-Rich Hilly Soils: A Case Study on Land Use, Heavy Metal Contamination, and Nutrient Element Distribution

The strategic development of selenium-enriched soil cultivation is essential for effective agricultural land management. This research explores the sustainable utilization of selenium-rich soils in Qiongzhong County, Hainan Island. An extensive evaluation was conducted on 7266 surface soil samples, assessing the selenium concentrations, nutrient levels, heavy metals, pH values, and soil organic matter (SOM). In addition, analyses of 70 samples for organochlorine compounds and PAHs were performed. The results indicated average selenium content of 0.46 mg/kg, with 55.2% of the samples surpassing the selenium enrichment threshold of 0.4 mg/kg. According to the GB15618-2018 standards, 127 samples (1.75%) showed medium or high chromium-associated risks. No contamination from organochlorine compounds or PAHs was found, including the 16 priority-controlled PAHs with an average concentration of 30.3 µg/kg, confirming the soil’s high quality. The correlation and factor analysis identified surface enrichment as the main factor influencing selenium accumulation, presenting minimal environmental risks. Consequently, three categories of selenium-rich soil were defined: selenium-rich, pollution-free, and high-nutrient selenium-rich soil. Recommendations based on the soil characteristics and existing agricultural practices were made for the cultivation of selenium-rich vegetables, rubber, and nuts. This study lays a foundation for the sustainable management of selenium-rich soils, providing insights for further research and decision-making to optimize these resources, thus promoting environmental protection and agricultural sustainability.

Heavy metals phytoextraction potential of Medicago sativa L. irrigated with waste and groundwater

Wastewater is generally used for crop irrigation purposes it since provides nutrients and organic matter to the soil. However, it can also add contaminants such as heavy metals. The objective of the present study was to evaluate the absorption and accumulation of lead and copper in the aerial and root parts of alfalfa (Medicago sativa L.) irrigated with raw wastewater, treated wastewater, and groundwater using the bioconcentration (BCF) and translocation (TF) factors. Three treatments (raw wastewater, treated wastewater, and groundwater) were tested in a randomized block design with four replicates. The results showed significant differences between treatments. The highest concentrations of lead and copper occurred in the aerial part of the alfalfa irrigated with raw wastewater. The TF factor for lead and copper was higher than one in all treatments; something similar was observed for the BCF, except in the groundwater treatment, indicating that alfalfa has the potential for phytoextraction.

Health Risk Assessment and Establishment of Exposure Limits for Children and Adults from Heavy Metals in Indoor Dust

Health Risk Assessment and Establishment of Exposure Limits for Children and Adults from Heavy Metals in Indoor Dust

Monitoring and Assessment of Toxicological Risks of Poultry Meat Contaminated with Heavy Metals.

This study aimed to investigate the heavy metal contamination in poultry meat of Kotli Sattian, Rawalpindi. The meat samples from ten sites were analyzed for lead, cadmium, chromium, copper, arsenic, nickel, zinc, iron, sodium, and calcium. The possible health risks of these metals were also observed. Mean lead, cadmium, chromium, arsenic, and nickel concentrations were higher than the permissible limits of the World Health Organization (WHO). Metals in meat samples showed the trend of Fe > Na > Zn > Ni > Ca > As > Cr > Pb > Cu > Cd. All the studied metals except lead were statistically significant (P ≤ 0.05). The hazard quotient (HQ) values of all the metals were below one, except iron. Iron showed chronic health risks in both adults (1.63) and children (3.64). Moreover, the cumulative hazard index (HI) of the metals indicated that meat consumption can pose a significant chronic toxic risk in both adults and children as the HI value was 2.06 for adults and 4.61 for children, which is greater than one. The carcinogenic risk (CR) of arsenic in meat for adults and children exceeded the acceptable range, making it a metal of concern. This means that the consumption of small concentrations of metal through meat may be the source of severe toxicological consequences. It can be concluded that meat is contaminated with metals; therefore, appropriate precautions should be taken to minimize this contamination.

Poly (acrylic acid-co-2-hydroxyethyl methacrylate)-grafted gum ghatti hydrogel for capturing heavy metal ions

In this work, a facile route is explored for the synthesis of a novel polymer composite-based hydrogel (PC-hydrogel). The ratio of 2-(Hydroxyethyl) methacrylate (HEMA) and acrylic acid (AA) is optimized first based on Fourier transform infra-red spectroscopy, swelling ratio (SR%) and surface negative charge (PZC). Results indicate that PC-hydrogel composed of copolymer of HEMA: AA in 1:4 ratio is optimized, for grafting on Gum ghatti (Gg) during free-radical graft copolymerization process. Among all other possible combination of HEMA: AA, 1:4 ratio grafted Gg is termed as PC-hydrogel [Poly (AA-co-HEMA)-g-Gg]. PC-hydrogel exhibited negative surface charge over a wide range of pH owing to increase in AA. The swelling (g/g) and water retention ratio (%) of the prepared hydrogel have been found to be 342.6, 385 & 412.6 g/g and 74.83, 65.30 & 57.86 % in grey, tap and distilled water respectively. Furthermore, PC-hydrogel is applied for capturing Cu2+ and Co2+ ions in aqueous phases. Experimental results showed that adsorption process was pH-dependent, and the maximum capturing of Cu2+ and Co2+ was observed at neutral pH 7. Among different adsorption isotherms models like Langmuir, Freundlich, and Temkin models, experimental data fitted closely with the Langmuir adsorption model showing a maximum adsorption capacity of 381.67 and 328.94 mg/g for Cu2+ and Co2+ respectively. The capturing of metal ion followed pseudo-second-order rate model [rate constant k = 1.7 x 10−4 for Cu2+ and 1.5 x 10−4 for Co2+ g/(mg.min)]. The PC-hydrogel property retained its uptake capacity of metal ions up to the three successive adsorption−desorption cycles, and exhibited higher selectivity towards Cu2+ and Co2+ and other (NaCl, MgCl2, CaCl2) coexisting ions.

A Facile Synthesis of RGO-Ag2MoO4 Nanocomposites for Efficient Lead Removal from Aqueous Solution

Efficiently treating wastewater, particularly the elimination of heavy metal ions from water systems, continues to be one of the most pressing and complex challenges in modern environmental management. In this work, reduced graphene oxide coupled silver molybdate binary nanocomposites (RGO-Ag2MoO4 NCs) have been prepared via hydrothermal method. The crystalline nature and surface properties of the developed RGO-Ag2MoO4 NCs were proved by XRD, FTIR, SEM, and EDS techniques. Adsorption experiments demonstrated that the nanocomposites (NCs) effectively removed Pb(II) ions within 120 min, achieving a maximum removal efficiency ranging from 94.96% to 86.37% for Pb(II) concentrations between 20 and 100 mg/L at pH 6. Kinetic studies showed that the adsorption process followed a pseudo-second order model. Isotherm analysis presented that the Langmuir model provided the greatest fit for the equilibrium data, with a monolayer adsorption capacity of 128.94 mg/g. Thermodynamic analysis revealed that the adsorption process was spontaneous and endothermic. The results of this study highlight RGO-Ag2MoO4 NCs as a highly promising and eco-friendly material for the effective elimination of Pb(II) ions from wastewater. Their strong adsorption capacity, coupled with sustainable properties, makes them an efficient solution for addressing lead contamination, offering significant potential for practical applications in water treatment systems.

Effect of Artificial Humic Acids Derived from Municipal Sludge on Plant Growth, Soil Fertility, and Dissolved Organic Matter

Due to its high nutrient utilization efficiency, liquid organic fertilizer has become a research hotspot in the field of agricultural planting. Artificial humic acids, which are near-nature products, can be deemed as a green liquid organic fertilizer, but few studies have been reported, which has limited their further application. In this study, artificial humic acids were derived from municipal sludge, and their effect on rice growth, soil fertility, and dissolved organic matter was investigated using multi-chamber root box experiments. The shoot and root biomass of rice can be significantly enhanced by artificial humic acids, and the heavy metal concentration in rice was within safe limits. Artificial humic acids can limit the decrease in soil pH, especially in the far-rhizosphere zone, and improve the distribution of nutrients in the rhizosphere, near-rhizosphere, and far-rhizosphere zones. The use of artificial humic acids led to a significant decrease in soil electrical conductivity. The dissolved organic carbon content in the root zone was significantly increased, and the fluorescence intensity of dissolved organic matter in the rhizosphere was significantly increased. The proportion of specific components of dissolved organic matter was just slightly changed in the rhizosphere and near-rhizosphere zones. Artificial humic acids promoted the humification of dissolved organic matter in the near-rhizosphere and far-rhizosphere zones. The findings indicate that the environmental impact of artificial humic acids is significantly different from conventional chemical fertilizers, and they show huge potential in the agriculture field.

Evaluation of Heavy Metal Contamination in Amaranthus hybridus (Spinach)

Heavy metals contamination in edible plants poses significant risks to human health and environmental sustainability. This study evaluates heavy metal contamination in Amaranthus hybridus L. (spinach) collected from three sites: Nyabunkaka River, Kogin Sarki, and Mayo-Gwoi River in Jalingo, Taraba State, Nigeria. The study aimed to determine the levels of lead (Pb), cadmium (Cd), chromium (Cr), zinc (Zn), copper (Cu), nickel (Ni), manganese (Mn), and cobalt (Co) in spinach samples using Atomic Absorption Spectrophotometry (AAS). Results revealed that Pb concentration in spinach from Nyabunkaka slightly exceeded the FAO permissible limit, while Cd, Cr, Zn, Cu, Ni, Mn, and Co levels in all samples were below FAO reference values, indicating minimal contamination risks. These findings highlight the potential environmental pollution near Nyabunkaka River and suggest that spinach from the selected areas remains largely safe for human consumption, except for slight Pb contamination. The study emphasizes the need for continuous monitoring to ensure food safety.