Heavy Metal Elements Research Articles

Evaluation of Heavy Metal and Specific Trace Elements Levels Among Fast-Food Workers and Their Susceptibility to Atherosclerosis.

Fast-food workers in Iraq face significant health risks due to exposure to heavy metals from fumes and dust during cooking activities. Heavy metals, such as lead (Pb), cadmium (Cd), and nickel (Ni), are toxic to cells even at low concentrations and can cause health risks, including atherosclerosis, due to oxidative stress and reduced antioxidant activity. To the best of our knowledge, this is the first study assess the levels of heavy metals in fast-food workers and investigate their potential link to atherosclerosis development by monitoring the levels of copper (Cu), zinc (Zn), magnesium (Mg), manganese (Mn), and iron (Fe). A total of 120 male participants aged between 20 and 40 years were included in the study, with 40 fast-food workers, 40 patients with atherosclerosis, and 40 healthy individuals evaluated. The levels of Pb, Cd, Ni, Cu, Zn, Mg, Mn, and Fe in all blood samples were determined using atomic absorption spectrometry. Results showed that the fast-food worker group had significantly higher levels of Pb, Cd, Cu, and Fe compared to the healthy control group, with increases of 57%, 75%, 30%, and 55%, respectively. Conversely, their levels of Zn and Mg were significantly lower, decreasing by 15% and 16%, respectively. On the other hand, the atherosclerosis patients' group had significantly higher levels of Pb, Cd, Cu, and Fe, with increases of 47%, 74%, 34%, and 28%, respectively, as well as significantly lower levels of Zn and Mg, decreasing by 17% and 21%, respectively, compared to the control group. These findings suggest that fast-food workers are at risk of developing atherosclerosis due to exposure to high levels of heavy metals and imbalances in essential trace elements. The results showed a significant increase in the levels of Pb and Cd in the sera of these workers, which was expected because of the long duration and high intensity of exposure to toxic heavy metals. This is a serious indicator that must be considered, as it has been previously established that increased levels of Pb and Cd in the body are linked to the risk of atherosclerosis. Additionally, an association between Pb and Cd levels and an imbalance in trace element levels (Cu, Zn, Mg, and Fe) were observed. The Implementation of stricter regulations and guidelines for maintaining cleanliness and safety in fast-food restaurants may be crucial for protecting workers and preventing long-term health complications.

Potential toxic elements (PTEs) in rhizosphere soils and crops under a black shale high geological background: Pollution characteristics, distribution and risk assessment

The LouShao Basin in Hunan Province is covered with two sets of black rock series containing various potential toxic heavy metal elements. The rock series are rich in various potential toxic heavy metal elements, and the weathered black shale is the main formation of local farmland soil, making it a typical area with high geological background in China. The purpose of this study is to assess the regional ecological and health risks by studying the correlation between the content of heavy metal elements enriched in rhizosphere soil, non-rhizosphere soil, and crops, and the concentration of heavy metal elements in the main source, black shale rocks. The results show that the elements in the black shale far exceed the world average of rock, severely affecting soil element concentrations. Se element is the most severely polluted in rhizosphere soil, exceeding the background value by 7 times. The concentration of heavy metals between rock-non-rhizosphere soil-rhizosphere soil-crops decreases linearly. The distribution of pollution has strong spatial autocorrelation, and the high geological background is the main reason. Pollution index results show significant pollution of Se, Cr, Hg, and Cd in crops, with the pollution of heavy metal element Cr in corn being extremely serious with Igeo = 6.71. The ecological risk order is Se > Cd > Cr > As > Pb > Hg. Humans mainly contact elements through skin contact and food chain intake. The HI value of heavy metal element Cd is greater than 1, indicating a high carcinogenic risk. Human exposure to Cd through skin contact and food chain intake may lead to related diseases such as kidney stones, and pose greater harm to children.

Integrating Transcriptomics and Proteomics to Characterize the Intestinal Responses to Cadmium Exposure Using a Piglet Model.

Cadmium (Cd) is a heavy metal element with a wide range of hazards and severe biotoxicity. Since Cd can be easily accumulated in the edible parts of plants, the exposure of humans to Cd is mainly through the intake of Cd-contaminated food. However, the intestinal responses to Cd exposure are not completely characterized. Herein, we simulated laboratory and environmental Cd exposure by feeding the piglets with CdCl2-added rice and Cd-contaminated rice (Cdcr) contained diet, as piglets show anatomical and physiological similarities to humans. Subsequent analysis of the metal element concentrations showed that exposure to the two types of Cd significantly increased Cd levels in piglets. After verifying the expression of major Cd transporters by Western blots, multi-omics further expanded the possible transporters of Cd and found Cd exposure causes wide alterations in the metabolism of piglets. Of significance, CdCl2 and Cdcr exhibited different body distribution and metabolic rewiring, and Cdcr had stronger carcinogenic and diabetes-inducing potential. Together, our results indicate that CdCl2 had a significant difference compared with Cdcr, which has important implications for a more intense study of Cd toxicity.

Advancements in Heavy Metal Stabilization: A Comparative Study on Zinc Immobilization in Glass-Portland Cement Binders.

Recent literature has exhibited a growing interest in the utilization of ground glass powder (GP) as a supplementary cementitious material (SCM). Yet, the application of SCMs in stabilizing heavy metallic and metalloid elements remains underexplored. This research zeroes in on zinc stabilization using a binder amalgam of GP and ordinary Portland cement (OPC). This study juxtaposes the stability of zinc in a recomposed binder consisting of 30% GP and 70% OPC (denoted as 30GP-M) against a reference binder of 100% CEM I 52.5 N (labeled reference mortar, RM) across curing intervals of 1, 28, and 90 days. Remarkably, the findings indicate a heightened kinetic immobilization of Zn at 90 days in the presence of GP-surging up to 40% in contrast to RM. Advanced microstructural analyses delineate the stabilization locales for Zn, including on the periphery of hydrated C3S particles (Zn-C3S), within GP-reactive sites (Si*-O-Zn), and amid C-S-H gel structures, i.e., (C/Zn)-S-H. A matrix with 30% GP bolsters the hydration process of C3S vis-à-vis the RM matrix. Probing deeper, the microstructural characterization underscores GP's prowess in Zn immobilization, particularly at the interaction zone with the paste. In the Zn milieu, it was discerning a transmutation-some products born from the GP-Portlandite reaction morph into GP-calcium-zincate.

Soil Quality Variation under Different Land Use Types and Its Driving Factors in Beijing

With the advancement of urbanization, land resources are becoming increasingly strained, particularly for urban greening purposes. In this context, a large number of newly cultivated lands dominated by construction waste and backfill soil are emerging in cities. Assessing the soil quality of these newly cultivated lands and achieving their rational utilization accurately and quantitatively has become an urgent issue. In this study, soil samples of five land use types, namely newly cultivated land (NCL, control), adjacent cropland (CL), arbor–shrub mixed forest (ASF), arbor forest (AF), and shrubland (SL) were selected around Beijing, China. ASF, AF, and SL are also newly cultivated lands composed of construction waste and backfill before greening. Based on principal component analysis (PCA), a total data set (TDS) and a minimum data set (MDS) were used to construct the soil quality index (SQI) model. Soil quality indicators covering the physical and chemical characteristics of the soil and their relationships with land use types were studied with the Partial Least Squares Path Model (PLS-PM). The results were summarized as follows: (1) The soil quality index under different land use types in the Beijing plain area were in the order of arbor–shrub mixed forest (ASF) > arbor forest (AF) > shrubland (SL) > cropland (CL) > newly cultivated land (NCL). (2) Soil organic carbon (SOC), soil water content (SWC), maximum water-holding capacity (MWHC), capillary water-holding capacity (CWHC), Pb, and Cd were identified as the MDS. The MDS of the soil quality assessment model showed a linear relationship with the TDS (y = 0.946x + 0.050, R2 = 0.51). (3) Land use types have an indirect impact on soil quality by changing the content of Pb. The chemical indicators’ coefficient (0.602) contributed more to the SQI than did the physical indicators’ (0.259) and heavy metal elements’ (−0.234). In general, afforestation and agricultural production could improve the newly cultivated lands’ soil quality, but afforestation is much better than agricultural production. These results will help to evaluate the SQI in the Beijing plain area objectively and accurately, and they have significant implications for soil restoration and management.

The Pollution Characteristics and Fate of Microplastics in Typical Wastewater Treatment Systems in Northern China

This study focuses on the occurrence status and removal efficiency of microplastics in wastewater treatment plant processes. Analysis of effluent and sludge samples from the Wulongkou and Shuangqiao wastewater treatment plants in Zhengzhou revealed an overall microplastic removal efficiency of 95.64% and 92.53%, respectively, indicating the effectiveness of wastewater treatment plants in reducing microplastic emissions. Microplastics primarily exist in forms such as fiber, fragment, floc, film, and grain. Fibers are predominant in the effluent of the Wulongkou plant, while fibers and films predominate in the effluent of the Shuangqiao plant. Moreover, microplastics are predominantly sized below 500 μm, with larger microplastics (2–5 mm) exhibiting higher removal efficiencies after secondary treatment. Analysis of microplastic types revealed that PE is the most common type in the effluent of the Wulongkou plant, while the Shuangqiao plant predominantly contains PE and PA66. The abundance of microplastics in sludge samples was found to be 6.4 ± 0.8 items/g and 11.3 ± 2.3 items/g, highlighting sludge as an important sink for microplastics. Surface analysis of microplastics revealed characteristics such as wrinkles and cracks, with energy-dispersive spectroscopy indicating significant adsorption of heavy metal elements such as Zn, Hg, and Pb onto microplastic surfaces in sludge. These findings underscore the importance of microplastic removal in wastewater treatment processes and provide scientific evidence for the control and management of microplastic pollution in the future.

Capacitive and Efficient Near-Infrared Stimulation of Neurons via an Ultrathin AgBiS2 Nanocrystal Layer.

Colloidal nanocrystals (NCs) exhibit significant potential for photovoltaic bioelectronic interfaces because of their solution processability, tunable energy levels, and inorganic nature, lending them chemical stability. Silver bismuth sulfide (AgBiS2) NCs, free from toxic heavy-metal elements (e.g., Cd, Hg, and Pb), particularly offer an exceptional absorption coefficient exceeding 105 cm-1 in the near-infrared (NIR), surpassing many of their inorganic counterparts. Here, we integrated an ultrathin (24 nm) AgBiS2 NC layer into a water-stable photovoltaic bioelectronic device architecture that showed a high capacitive photocurrent of 2.3 mA·cm-2 in artificial cerebrospinal fluid (aCSF) and ionic charges over 10 μC·cm-2 at a low NIR intensity of 0.5 mW·mm-2. The device without encapsulation showed a halftime of 12.5 years under passive accelerated aging test and did not show any toxicity on neurons. Furthermore, patch-clamp electrophysiology on primary hippocampal neurons under whole-cell configuration revealed that the device elicited neuron firing at intensity levels more than an order of magnitude below the established ocular safety limits. These findings point to the potential of AgBiS2 NCs for photovoltaic retinal prostheses.

Preparation and property studies of ferric sulfoaluminate cement based on Bayer red mud and phosphogypsum.

The Bayer red mud (RM) and phosphogypsum (PG) accumulation have caused significant environmental contamination. However, practical and effective resource utilization technologies are still lacking currently. This work aims to develop ferric sulfoaluminate cement (FSAC) employing low-cost materials including Bayer red mud, phosphogypsum, and other materials. This method effectively improves the utilization rate of Bayer red mud and phosphogypsum. Under the premise of ensuring the performance of FSAC, the utilization rate of solid waste can reach up to 48.56%. The effects of different red mud dosages on cement mineral formation, workability, and mechanical properties are investigated. Then, untreated phosphogypsum is adopted as a retarder for FSAC, and the hydration process, working properties, mechanical properties, types of hydration products, and morphology of FSAC are explored. The results suggest that the crystal transformation of Ye'elemite is promoted with the increase of Bayer red mud content. Cubic crystal system Ye'elemite with higher hydration activity is generated, which increases the early strength of cement but greatly reduces the setting time, hindering the later strength growth. Untreated phosphogypsum can effectively delay the early hydration process of FSAC, prolong the setting time of cement, and increase the strength of FSAC in the later stage. When the dosage of Bayer red mud and phosphogypsum is 17.64% and 9.21%, respectively, with phosphogypsum dosage of 20%, the prepared FSAC has satisfactory mechanical properties, and the 3-day and 90-day compressive strengths are 34.6 MPa and 57.1 MPa, respectively. In addition, the study of heavy metal leaching indicates that the FSAC prepared by Bayer red mud, phosphogypsum, and other raw materials will generate no environment pollution, and the solidification of heavy metal elements in the cement slurry is superior.

Coal gangue in asphalt pavement: A review of applications and performance influence

The comprehensive utilization of coal gangue is low, and this causes serious environment problems and security risks. The physical and chemical properties of coal gangue were analyzed in this paper, and the estimated value of different chemical components of coal gangue was counted. The physical properties of coal gangue aggregate were analyzed, and performance and its influencing factors of base course mixture with coal gangue aggregate were studied. The influence of coal gangue powder and coal gangue aggregate on performance of asphalt mortar and asphalt mixture was analyzed, and possible influencing factors and function mechanism were discussed. The results showed that heavy metal elements of coal gangue applied into asphalt pavement is not seeped out. The crushing value, water absorption and flat elongated particles content of coal gangue aggregate are generally high, but the compressive strength of base course with coal gangue aggregate is verified to meet the strength requirement. The performance, volume stability and durability of base course with coal gangue aggregate are closely related to aggregate gradation, the type and dosage of cementations materials and aggregate. The high temperature performance, temperature susceptibility and viscosity of asphalt mortar are improved by the addition of different coal gangue powder, and improvement effect of activated coal gangue powder on asphalt mortar performance is better. The low temperature performance and adhesion property of asphalt mortar with chemical activated coal gangue powder are improved. The physical reaction between asphalt and different coal gangue powder is only taken place. The temperature stability of asphalt mixture with coal gangue coarse aggregate has achieved the specification requirement. The water stability and low temperature fracture performance of asphalt mixture with fine aggregate replaced by coal gangue are improved. However, the high temperature performance of above mixture is lower than conventional hot mix asphalt mixture. The research results will provide reference for coal gangue applied into asphalt pavement.

Assessment of Heavy Metal Contamination and Ecological Risk in Soil within the Zheng–Bian–Luo Urban Agglomeration

As urbanization accelerates, the contamination of urban soil and the consequent health implications stemming from urban expansion are increasingly salient. In recent years, a plethora of cities and regions nationwide have embarked on rigorous soil geological surveys with a focus on environmental quality, yielding invaluable foundational data. This research aims to develop scientifically robust and rational land-use planning strategies while assessing the levels of heavy metal pollution and associated risks. The urban agglomeration encompassing Zhengzhou, Luoyang, and Kaifeng (referred to as Zheng–Bian–Luo Urban Agglomeration) in Henan Province was designated as the study area. Leveraging the Nemerow comprehensive index method alongside the Hakanson potential ecological risk assessment method, this study delved into the pollution levels and potential ecological ramifications of nine heavy metals, namely Cr, Mn, Ni, Cu, Zn, As, Cd, Pb, and Co. Research indicates that the hierarchy of individual potential ecological risks ranges from most to least significant as follows: Cd > Pb > Cr > Ni > Cu > Zn > As > Mn > Co. The concentrations of Cd in both Zhengzhou and Kaifeng surpassed the established background levels. Furthermore, the mean single-factor pollution index values for the heavy metals Cd and Zn exceeded 1, signifying a state of minor pollution. The Nemerow comprehensive index P of Cd and Zn is between 1 < Pcomp ≤ 2, which is considered mild pollution. The comprehensive P values of the other seven metal elements are all less than 0.7, reaching a clean (alert) level. Predominantly, the primary potential risk factor in the superficial soil of the Zheng–Bian–Luo urban agglomeration is Cd, while the ecological risk implications associated with other heavy metal elements are comparatively minimal. The soil environmental quality within the designated study area remains secure, although certain localized areas pose potential risks of heavy metal pollution. A comprehensive assessment of the current state of soil heavy metal pollution is essential to establish a theoretical foundation and provide technical support for soil environmental protection, pollution mitigation, and sustainable utilization.

Water Quality and Environmental Health of Lakes in Coimbatore, India: A Comprehensive Study of the Physicochemical Characteristics

The deterioration of lake water quality is a major national issue, particularly in regions with industrial activity. This study assesses the water quality of five lakes in Coimbatore, India: Krishnampathi, Ukkadam, Kurichi, Sulur, and Singanallur, between December 2016 and April 2017. Twenty physicochemical parameters were analysed following standard procedures outlined by the American Public Health Association. Twelve heavy metal elements concentration in the lakes was analysed using inductively coupled plasma-mass spectroscopy. The results of this study revealed that the values of 17 physicochemical parameters fell beyond the WHO recommended pollution levels in all the study sites, except Sodium, Nitrate, and Sulphate. While, the concentration of 10 heavy metal elements determined were within acceptable limits of WHO-recommended standards for drinking water across all lakes, except Fe and Pb. F-test revealed that the concentration of all the physicochemical parameters varied significantly across all the study sites, except for pH (P = .749). Statistical analysis such as principal component analysis was adopted, and the results were discussed on the multivariate relationships of the physiochemical parameters and heavy metal concentrations of the five study sites. Overall, the findings highlight the urgent need for continuous monitoring and comprehensive management strategies to mitigate the deteriorating water quality in the lakes of Coimbatore district, emphasizing the critical importance of addressing the multitude of factors contributing to this environmental challenge.

Analysis and Evaluation of Heavy Metal Pollution in Farmland Soil in China：A Meta-analysis

In this study, a Meta-analysis was used to investigate the pollution status of eight farmland soil heavy metal elements (As, Cd, Cr, Cu, Hg, Ni, Pb, and Zn) in China. Meanwhile, their spatiotemporal changes and differences between different types of cultivated land were explored. The research data were chosen from 449 relevant literature data collected by CNKI and Web of Science from 2005 to 2021, and the Meta-analysis used a weighted method based on "sampling numbers", "study area", and "standard deviation". The results showed that the national average values of the eight heavy metal elements in Chinese farmland soil were ω(As)11.00 mg·kg-1, ω(Cd)0.350 2 mg·kg-1, ω(Cr)62.91 mg·kg-1, ω(Cu)28.87 mg·kg-1, ω(Hg)0.135 1 mg·kg-1, ω(Ni)28.91 mg·kg-1, ω(Pb)34.67 mg·kg-1,and ω(Zn)90.24 mg·kg-1. Compared with their background values, all elements except As accumulated to some extent, and Cd and Hg accumulated the most, exceeding their background values by 177.9% and 340.3%, respectively. The research results indicated that Cd and Hg were the main pollution elements in farmland soil in China, and their accumulation was mainly influenced by human activities. In terms of their temporal and spatial changes, the Yunnan-Guizhou Plateau and the eastern coast were the most concentrated areas of pollution cases, and the pollution center shifted from the middle reaches of the Yangtze River to the southwest over time. The accumulation of heavy metals in farmland soil was affected by crop planting types, and the accumulation of heavy metals in vegetable and paddy soil was significantly greater than that in other cultivated land types.

Accurate method based on data filtering for quantitative multi-element analysis of soils using CF-LIBS

To obtain more stable spectral data for accurate quantitative analysis of multi-element, especially for the large-area in-situ elements detection of soils, we propose a method for a multi-element quantitative analysis of soils using calibration-free laser-induced breakdown spectroscopy (CF-LIBS) based on data filtering. In this study, we analyze a standard soil sample doped with two heavy metal elements, Cu and Cd, with a specific focus on the line of Cu I 324.75 nm for filtering the experimental data of multiple sample sets. Pre- and post- data filtering, the relative standard deviation for Cu decreased from 30% to 10%, The limits of detection (LOD) values for Cu and Cd decreased by 5% and 4%, respectively. Through CF-LIBS, a quantitative analysis was conducted to determine the relative content of elements in soils. Using Cu as a reference, the concentration of Cd was accurately calculated. The results show that post- data filtering, the average relative error of the Cd decreases from 11% to 5%, indicating the effectiveness of data filtering in improving the accuracy of quantitative analysis. Moreover, the content of Si, Fe and other elements can be accurately calculated using this method. To further correct the calculation, the results for Cd was used to provide a more precise calculation. This approach is of great importance for the large-area in-situ heavy metals and trace elements detection in soil, as well as for rapid and accurate quantitative analysis.

K2(Bi@Pd12@Bi20)]4-: An Endohedral Inorganic Fullerene with Spherical Aromaticity.

Inorganic fullerene clusters have attracted widespread attention due to their highly symmetrical geometric structures and intrinsic electronic properties. However, cage-like clusters composed of heavy metal elements with high symmetry are rarely reported, and their synthesis is also highly challenging. In this study, we present the synthesis of a [K2(Bi@Pd12@Bi20)]4- cluster that incorporates a {Bi20} cage with pseudo-Ih symmetry, making it the largest main group metal cluster compound composed of the bismuth element to date. Magnetic characterization and theoretical calculations suggest that the spin state of the overall cluster is a quartet. Quantum chemical calculations reveal that the [Bi20]3- cluster has a similar electronic configuration to C606- and the [Bi@Pd12@Bi20]6- cluster exhibits a unique open-shell aromatic character.

Health Risk Assessment of Heavy Metals in Soils of a City in Guangdong Province Based on Source Oriented and Monte Carlo Models

Taking a city in Guangdong Province as the research area, the concentration and spatial distribution characteristics of heavy metals in the surface soil were studied to clarify the situation of soil heavy metal pollution and priority control factors, providing basic data for the prevention and control of soil heavy metal pollution in the city. The content characteristics of heavy metals in 221 soil samples in the city were analyzed, and the potential health risk assessment and source analysis were carried out through the Monte Carlo model, the potential health risk assessment (HRA) model, and the PMF receptor model. It was found that heavy metals ω(As), ω(Hg), ω(Cd), ω(Pb), ω(Cr), ω(Cu), ω(Ni), and ω(Zn) in the soil of the city were 18.16, 0.43, 1.46, 68.57, 98.34, 64.19, 26.53, and 257.32 mg·kg-1, respectively, with a moderate to high degree of variation. Except for Ni concentration, the soil concentrations of other heavy metal elements exceeded the background values of soil in Guangdong Province to a certain extent, and the concentrations of Cd and Zn exceeded the national secondary standards, resulting in severe heavy metal pollution; the main sources of heavy metals were industrial sources, and natural parent materials, lead battery manufacturing, transportation, artificial cultivation, and pesticide and fertilizer inputs also had an undeniable impact on the accumulation of heavy metals in the soil. Heavy metals in the soil had a certain degree of tolerable carcinogenic health risk for both children and adults, whereas non-carcinogenic risks could be ignored. The potential health risk of children was greater than that of adults, and the main exposure route was through oral intake. The input sources of pesticides and fertilizers and As should be the main controlling factors for the health risks of heavy metals in the city's soil, followed by mixed sources and Cr. There were differences in the spatial distribution characteristics and relative pollution levels of heavy metals, and it is necessary to deepen zoning monitoring and control, strengthen soil pollution prevention and control, and reduce human input of heavy metals in soil.

Comprehensive recycling of slag from the smelting of spent automotive catalysts

Spent automotive catalyst is a valuable source of platinum group metals (PGMs), making them crucial secondary resources. Currently, the main process for recovering PGMs from these catalysts is metal capture method. The smelting process would produce a significant amount of residual slags containing various components like SiO2, Al2O3, CaO, Fe2O3, Na2O, as well as high levels of heavy metals including Cr, Pb, and Ni. These slags are considered either solid waste or hazardous waste and usually disposed of in landfills, which can have detrimental effects on the environment. Furthermore, the smelting slags also contain approximately 2–5 % rare earth elements and trace amounts of precious metal elements. In this study, vacuum carbothermal reduction is employed to pretreat the smelting slags. This method not only successfully removes the heavy metal element lead, but also efficiently achieves the recovery of rare earths, and the enrichment of platinum group metals by mineral phase transformation of cerium-zirconium solid solution and in-situ iron capture. The lead removal rate exceeded 99 %, and the grade of precious metals in the enrichment process was approximately 12 times higher than the original material, with a recovery rate more than 90 %. The leaching rate of rare earths also increased from less than 50 % to more than 95 % after vacuum carbothermal reduction. The effect of vacuum carbothermal reduction pretreatment on the smelting slag phase was systematically studied, and the mechanism behind the increasing rare earth leaching rate due to this pretreatment was further analyzed.

Biodegradation effects of three Aspergillus species on iron-based oxides (Hematite − Goethite) in paint layer in oil paintings

The inorganic colour layer based on iron oxide is affected by microorganisms (fungi) and leads to its deterioration due to feeding on the mineral elements through the chemical composition of the colour in the presence of a suitable environment (medium). Damage occurs as a result of heavy metal elements being removed from the colour, leading to a defect in the chemical composition and the fading of the colours. The current study showed the effect of the different types of the most common fungi on oil paintings (Aspergillus flavius, Aspergillus fumigatus and Aspergillus niger) after cultivating the different types of fungi and obtaining pure colonies for each fungus separately and conducting a fungal infection on experimental samples with preparing the old techniques, coloured with hematite red and goethite yellow. Each colour is mixed with different proportions of linseed oil (1, 2, 3). They were aged artificially and incubated at a temperature of 262+- degrees and examined periodically until the fungi appeared on the surface in the form of colour spots ranging from very dark (severe infestation) to light (low infestation). The change in chemical composition was measured by Raman and EDX analyses of the samples before and after infection. Fungi showed the appearance of spoilage products from metal sulfides and metal carboxylates. The iron oxide ion decreased in both the red and the yellow colours, leading to a change after the fungal infection. Examination of the morphological surface using SEM, USB and measurement of colour change showed the change in the red colour more than the yellow and scattering of green and black colour dots on the surface of the sample. Correlation and Simple Linear Regression were applied for each colour before and after besides both colours together. It was found that these colours appeared around some of the fungal colonies as a result of the activities. Fungal species of some strains reduced Fe+3 to Fe+2 . This provides new insights into the role of microorganisms in the deterioration of painted surfaces.

Effect of ball milling-Ca(OH)2 coupling activation on the cementitious properties of ferrous extraction tailing of nickel slag: Basic properties, hydration mechanism and heavy metal safety

In order to improve the reactivity of ferrous extraction tailing of nickel slag (FETNS), This paper delves into the influence of ball milling-activator Ca(OH)2 on the cementitious activity of FETNS. Furthermore, it assesses the combined activation's impact on the working performance, mechanical properties, shrinkage properties, early hydration process, hydration products, and heavy metal element leaching of the FETNS-OPC composite cementitious system. The results show that the coupling activation significantly enhanced the reactivity of FETNS and prolonged the acceleration period of the composite cementitious system during the hydration process, thereby promoting the hydration reaction. This not only shortened the setting time of the composite cementitious system, but also significantly improved its early compressive strength. The microscopic test results showed that the coupling activation improved the reaction degree of the composite cementitious system, promoted the formation of more reaction products, and increased the compactness of the internal structure. In addition, the coupling activation also enhanced the degree of polymerization of the composite cementitious system, and these factors together led to an increase in compressive strength. However, it is worth noting that with the increase of FETNS reactivity under the coupling activation, the autogenous shrinkage change rate and drying shrinkage change rate of the composite cementitious system also increased accordingly. Finally, the results of the heavy metal leaching test showed that the coupling activation reduced the leaching value of heavy metal elements in FETNS, ensuring the safety of practical application.

Chemometric assessment of electronic cigarettes based on the ICP-MS determination of multiple heavy metal concentrations

To elucidate the concentrations of heavy metal elements in commercially available electronic cigarettes and improve quality assessment. Inductively coupled plasma-mass spectrometry (ICP-MS) coupled to chemometrics was used to determine the concentrations of Cr, Ni, As, Cd, Sn, Sb, Hg, and Pb in the e-liquids and aerosols derived from 32 electronic cigarettes sold commercially under six brand names. The e-liquids contained: 4.858 to 274.658 (Cr), 17.292 to 3068.375 (Ni), 3.217 to 29.867 (As), 0.225 to 24.717 (Cd), 0.783 to 17.042 (Sn), 0.658 to 36.033 (Sb), 0.658 to 187.592 (Hg), and 2.458 to 17.417 (Pb) ng g−1. The aerosol samples contained: 276.075 to 3333.175 (Cr), 72.908 to 1150.183 (Ni), 4.567 to 86.958 (As), 0.400 to 12.842 (Cd), 1.092 to 32.142 (Sn), 0.976 to 10.633 (Sb), 3.483 to 234.708 (Hg), 27.833 to 849.100 (Pb) ng 100 puffs−1. The recovery of heavy metals ranged from 99.1% to 112.4% in the e-liquids and from 87.3% to 116.6% in the aerosols, with RSD values below 10%. Hierarchical cluster analysis grouped the e-liquids into eight clusters, and the aerosols into five, indicating differences between products within brands and between different brands. Orthogonal partial least squares discriminant analysis coupled with variable importance in projection (VIP > 1) identified As and Sb as the primary heavy metals causing differences between the e-liquids, while differences between the aerosols were caused by Hg, As, Pb, Cd, and Cr. The use of chemometric methods yields a greater depth of information that will support improvements to the quality control of e-cigarette products and the assessment of their potential risk to human health.

Establishment of multi-pollutant emission inventory for coal-fired power plants in Guangdong province: A comprehensive approach to air quality management

Emissions of heavy metals from coal-fired power plants pose significant environmental and health risks. This study focuses on quantifying the point-source emissions of heavy metal elements from coal-fired power plants in Guangdong Province, a major economic region with numerous power plants. A bottom-up approach was used to calculate the emissions of mercury (Hg), arsenic (As), and other elements in 2018, along with scenario assumption analyses. The total emissions of Hg, As, Pb, Cd, Cr, and Ni were estimated at 2305, 7443, 7891, 298, 3039, and 7131 kg in 2018, respectively. In addition, the Pearl River Delta (PRD) region, due to its economic development and demand for electricity, has the highest levels of heavy metals emitted from coal-fired power plants in the region, accounting for 42.17-48.60% of the provincial emissions. Scenario simulations showed that the installation of advanced dust removal methods (e.g., LLT-ESP) significantly reduces heavy metal emissions compared to the baseline. It is crucial to continue investing in advanced dust removal technologies and enforce stricter regulations to further mitigate heavy metal emissions from coal-fired power plants.