Heavy Ion Research Articles

Effect of the charge asymmetry and orbital angular momentum in the entrance channel on the hindrance to complete fusion

The hindrance to complete fusion is studied as a function of the charge asymmetry of colliding nuclei and orbital angular momentum of the collision. The formation and evolution of a dinuclear system (DNS) in the heavy-ion collisions at energies near the Coulomb barrier is calculated in the framework of the DNS model. The DNS evolution is considered as nucleon transfer between its fragments. The results prove that a hindrance at formation of a compound nucleus (CN) is related with the quasifission process, which is breakup of the DNS into products instead to reach the equilibrated state of the CN. The role of the angular momentum in the charge (mass) distribution of the reaction products for the given mass asymmetry of the colliding nuclei has been demonstrated. The results of this work have been compared with the measured data for the quasifission yields in the C12+Pb204 and Ca48+Er168 reactions to show the role of the mass asymmetry of the entrance channel. Published by the American Physical Society 2024

Sphere-shaped ZnO photocatalyst synthesis for enhanced degradation of the Quinolone antibiotic, Ofloxacin, under UV irradiation.

The sphere-shaped zinc oxide (ZnO) photocatalyst was synthesized by the homogeneous precipitation method, using Zn(CH3COO)2·2H2O as a zinc precursor and NH4OH as a precipitating agent. The morphology and crystal structure of the prepared ZnO sample were studied by XRD, SEM, FT-IR, XPS, zetapotential measurements, and a low-temperature nitrogen adsorption-desorption technique. The optical characteristics of ZnO were determined by UV - Vis diffuse reflectance spectroscopy. ZnO photocatalyst performance of up to 100% within 210min was observed in the photodegradation of the ofloxacin antibiotic under ultraviolet (UV) irradiation. The effect of antibiotic concentration, heavy metal ions, and water sources on the photocatalytic activity of ZnO demonstrated both the potential of its application under different conditions, and a good adaptability of this photocatalyst. The photodegradation reaction correlated well with the first-order kinetics model, with a rate constant of 0.0173min-1. The reusability of the photocatalyst was verified after three cycles of use. Admittedly, photogenerated electrons and holes played a key role in removal of the antibiotic. This work showed the suitability of prepared ZnO for antibiotic removal, and its potential use for environmental protection.

Ultra-high capacity and anti-interference for Cr(VI) removal by tannin-polyvinylimine modified graphite carbon nitride

To combat the increasingly serious water pollution caused by heavy metal ions, the development of efficient adsorbents is of great significance. In this study, a novel composite adsorbent for Cr(VI) removal was smartly designed using environmentally friendly materials such as tannic acid (TA) and polyethyleneimine (PEI) for surface modification of g-C3N4 nanosheets through covalent assembly of polyphenols and amines. The obtained (PEI-TA)-g-C3N4 composite was capable of efficiently and quickly adsorbing Cr(VI) in water, with a maximum adsorption capacity of 769.23 mg/g at 308 K (35 °C), which was much higher than most reported Cr(VI) adsorbents. Notably, (PEI-TA)-g-C3N4 could reduce highly toxic Cr(VI) to low toxic Cr(III) and effectively adsorb it. The Cr(VI) adsorption process was a spontaneous thermal adsorption process that conformed to the pseudo-second-order kinetic model and Langmuir isotherm model. In addition, the excellent photothermal performance of (PEI-TA)-g-C3N4 further accelerated the adsorption of Cr(VI). Moreover, the strong anti-interference ability of (PEI-TA)-g-C3N4 composite against anions and other metal ions enabled it to effectively remove Cr(VI) in complex environments, expanding its practical application scenarios. The polymer coatings rich in phenolic hydroxyl- and amine-rich formed on the large surface area of g-C3N4 and the protonation of the amino groups are the keys for (PEI-TA)-g-C3N4 composite to have ultra-high adsorption performance and strong anti-interference ability towards Cr(VI). The designed strategy of this metal-free and environmentally friendly composite with ultra-high removal of Cr(VI) capability from wastewater provides new ideas for developing green, inexpensive, and efficient adsorbents.

Medium-Enhanced cc¯ Radiation

We show that the same QCD formalism that accounts for the suppression of high-pT hadron and jet spectra in heavy-ion collisions predicts medium-enhanced production of cc¯ pairs in jets. We demonstrate that this phenomenon, which cannot be accessed by traditional jet-quenching observables, can be directly observed using D0D¯0-tagged jets in nuclear collisions. Published by the American Physical Society 2024

The Effect of 147 MeV 84Kr and 24.5 MeV 14N Ions Irradiation on the Optical Absorption, Luminescence, Raman Spectra and Surface of BaFBr Crystals

Today, BaFBr crystals activated by europium ions are used as detectors that store absorbed energy in metastable centers. In these materials, the image created by X-ray irradiation remains stable in the dark for long periods at room temperature. As a result, memory image plates are created, and they are extended to other types of ionizing radiation as well. Despite significant progress towards X-ray storage and readout of information, the mechanisms of these processes have not been fully identified to date, which has hindered the efficiency of this class of phosphors. In this study, using photoluminescence (PL), optical absorption (OA), Raman spectroscopy (RS), and atomic force microscopy (AFM), the luminescence of oxygen vacancy defects to BaFBr crystals irradiated with 147 MeV 84Kr and 24.5 MeV 14N ions at 300 K to fluences (1010–1014) ion/cm2 was investigated. BaFBr crystals were grown by the Shteber method on a special device. Energy-dispersive X-ray spectroscopy (EDX) analysis revealed the presence of Ba, Br, F, and O. The effect of oxygen impurities present in the studied crystals was considered. The analysis of the complex PL band, depending on the fluence and type of ions, showed the formation of three types of oxygen vacancy defects. Macrodefects (tracks) and aggregates significantly influence the luminescence of oxygen vacancy defects. The creation of hillocks and tracks in BaFBr crystals irradiated with 147 MeV 84Kr ions is shown for the first time. Raman spectra analysis confirmed that BaFBr crystals were amorphized by 147 MeV 84Kr ions due to track overlap, in contrast to samples irradiated with 24.5 MeV 14N ions. Raman and absorption spectra demonstrated the formation of hole and electron aggregate centers upon swift heavy ions irradiation.

Simultaneous extraction of five heavy metal ions from root vegetables via dual-frequency ultrasound-assisted enzymatic digestion

The dual-frequency ultrasound-assisted enzymatic digestion (DUED) technique was developed for synchronous green extraction of five heavy metal ions in root vegetables. The combination of α-amylase, cellulase, and papain showed significant advantageous in extracting heavy metal ions. Under optimized dual-frequency ultrasonic conditions, the extraction rates of Cr, As, Cd, Pb, and Hg in carrots reached 99.04%, 105.88%, 104.65%, 104.10%, and 103.13% respectively. And the extraction process is highly efficient, completing in just 15 min. Compared to conventional microwave-assisted acid hydrolysis method, this technique eliminates the need for high-temperature concentrated acid, enhancing its environmental sustainability while maintaining mild reaction conditions, making it ideal for biosensors application. Additionally, simultaneous extraction and detection of four heavy metals in lotus roots were successfully achieved by using DUED and a fluorescent paper-based microfluidic chip. The obtained results are consistent with those obtained using conventional methods.

Machine learning approaches for simultaneous spectrophotometric determination of heavy metal ions in water samples

In this study, the simultaneous determination of Co, Cd, Ni, Cu, and Pb was carried out as a color complex with 4-(2-pyridylazo) resorcinol in an aqueous solution under the assesting of machine learning. A partial least-squares multivariate linear regression and artificial neuron network for the analysis of mixtures of metals were developed. MATLAB is a powerful software machine learning program that was used to support matrix calculations and displays. The benefit of MATLAB in the construction of the machine learning model allows the development of a rapid and highly effective analysis of multiple components in the mixtures without separation and enrichment. For individual determinations, the working ranges were discovered as the important information for choosing the initial concentration of each heavy metal in a mixture, r. The results of analysis of Ni2+, Pb2+, and Cd2+ by two methods Partial Least Squares - PLS and Artificial Neural Networks - ANN are sensitive and accurate for simultaneous determination of the concentration of these ions in the synthesis mixture with a high regression coefficient of 0.993, respectively, 0.997, 0.997 for Ni2+, Pb2+ and Cd2+. As for Cu2+ and Co2+, the accuracy is higher when using the ANN method.

Portable smartphone-based RecJf exonuclease-modulated enhanced ratiometric fluorescence bioplatform for rapid visual detection of As3+

Arsenite (As3+), a highly carcinogenic heavy metal ion and widely distributed in nature, can have serious health implications even with minimal exposure. Herein, a portable smartphone device-based ratiometric fluorescence platform was established for sensitive detection of As3+. The work relied on the use of metal-organic framework-tagged cDNA (PCN-224-cDNA), with high adsorption capability and fluorescence properties, as an internal reference to quench the fluorescence of FAM-anchored aptamer (FAM-Apt) via hybridization. In the presence of As3+, FAM-Apt specifically bound to As3+ leading to conformational changes, which detached from the PCN-224-cDNA surface. Interestingly, a smartphone-based readout equipment engineered using a 3D-printed hardware device administered the portable detection of As3+. The limit of detection (LOD) for the proposed ratiometric biosensor was calculated to be 0.021 ng/mL, significantly below WHO's safety threshold. Hence, it demonstrates significant potential for large-scale screening of As3+ residues in food and the environment.

Modified xanthan gum (natural polymeric material) and its derivative for wastewater treatment: A review

AbstractNaturally occurring xanthan gum (XG) has much commercial importance because of its excellent physicochemical, eco‐friendly, and non‐toxic properties. It is used in various applications like protein extraction, wastewater treatment, tissue engineering, drug delivery, food packaging, and so forth. XG is a natural material, and it has some limitations related to the mechanical stress, thermal stability, and hydration. To overcome the limitation, XG can be modified by adding third component or modification of operation for specific applications. XG can be modified by physical, genetically, enzymatically, or chemical processes. Revamped XG also enhances the efficiency toward adsorbing toxic metal ions and organics from synthetic or industrial effluents. The emphasis of present review article is to address the structural characteristics along with the focus on the developing chemically modified XG like grafted, cross‐linked, nanocomposites, and functionally modified biopolymer. However, this review commences thorough discussion on numerous ways of modifications, which can be attempted in XG structure, expanding its applications for heavy metal ion along with dye removal.

Hybrid Nanoparticles from Random Polyelectrolytes and Carbon Dots.

The present study concerns the preparation of hybrid nanostructures composed of carbon dots (CDs) synthesized in our lab and a double-hydrophilic poly(2-dimethylaminoethyl methacrylate-co-oligo(ethylene glycol) methyl ether methacrylate) (P(DMAEMA-co-OEGMA)) random copolymer through electrostatic interactions between the negatively charged CDs and the positively charged DMAEMA segments of the copolymer. The synthesis of P(DMAEMA-co-OEGMA) copolymer was conducted through RAFT polymerization. Furthermore, the copolymer was converted into a strong cationic random polyelectrolyte through quaternization of the amine groups of DMAEMA segments with methyl iodide (CH3I), and it was subsequently utilized for the complexation with the carbon dots. The molecular, physicochemical, and photophysical characterization of the aqueous solution of the copolymers and their hybrid nanoparticles was conducted using dynamic and electrophoretic light scattering (DLS, ELS) and spectroscopic techniques, such as UV-Vis, fluorescence (FS), and FT-IR spectroscopy. In addition, studies of their aqueous solution using DLS and ELS showed their responsiveness to external stimuli (pH, temperature, ionic strength). Finally, the interaction of selected hybrid nanoparticles with iron (III) ions was confirmed through FS spectroscopy, demonstrating their potential application for heavy metal ions sensing.

Magnetic and Magnetocaloric Modifications near Room Temperature in Fe0.6Al0.4 Nanoalloys under Irradiation by Swift Heavy Ions

Magnetic and Magnetocaloric Modifications near Room Temperature in Fe_0.6Al_0.4 Nanoalloys under Irradiation by Swift Heavy Ions

Graphene-based nanocomposites as scavenger of heavy metal ions from water: a review on synthesis, characterizations and application as adsorbent

Graphene-based nanocomposites as scavenger of heavy metal ions from water: a review on synthesis, characterizations and application as adsorbent

ZnO/g-C3N4 photocatalyst activated by low-pressure ultraviolet for restoring the SWASV signals: A fast pretreatment method for electrochemically detecting Cd2+ and Pb2+ in soil extracts

Soil organic matter (SOM) significantly impacts the detection accuracy of Cd2+ and Pb2+ using square wave anodic stripping voltammetry (SWASV) due to the complexation of SOM to heavy metal ions (HMIs), thereby attenuating SWASV signals. This study explored an effective pretreatment method that combined low-pressure ultraviolet (LPUV) photolysis with the ZnO/g-C3N4 photocatalyst, activating the photocatalyst to generate highly oxidative •OH radicals and O2•− radicals, which effectively disrupted this complexation, consequently restoring the electroactivity of HMIs and achieving high-fidelity SWASV signals. The parameters of the LPUV-ZnO/g-C3N4 photocatalytic system were meticulously optimized, including the pH of photolysis, duration of photolysis, g-C3N4 mass fraction, and concentration of the photocatalyst. Furthermore, the ZnO/g-C3N4 photocatalyst was thoroughly characterized, with an in-depth investigation on the synergistic interaction between ZnO and g-C3N4 and the mechanisms contributing to the restoration of SWASV signals. This synergistic interaction effectively separated charge carriers and reduced charge transfer resistance, enabling photogenerated electrons (e−) from the conduction band of g-C3N4 to be quickly transferred to the conduction band of ZnO, preventing the recombination of e− and hole (h+) and generating more radicals to disrupt complexation and restore the SWASV signals. Finally, the analysis of HMIs in real soil extracts using the proposed pretreatment method demonstrated high detection accuracy of 94.9% for Cd2+ and 99.8% for Pb2+, which validated the feasibility and effectiveness of the proposed method in environmental applications.

Separation of silicon and germanium from the chlorination distillation residue based on co-precipitation of sodium-aluminum–silicon

Germanium (Ge) is known as a critical metal, and dust from coal burning is an important raw material for the extraction of Ge by the chlorination distillation process. Nevertheless, the residue produced by the chlorination distillation process (RCDP) also contains a considerable amount of Ge. The extraction of Ge from RCDP requires the conversion of Si and Ge into soluble compounds, and the efficient separation of large amounts of Si and Al from small amounts of Ge. In this study, Al, Si and Ge in RCDP were converted to soluble sodium slat by sodium roasting. Under the conditions of roasting temperature of 600 ℃, time of 120 min and the mass ratio of NaOH to RDCP of 3:1, 56.92 % of Al, 87.75 % of Si and 91.20 % of Ge are dissolved into solution. According to the formation mechanism of sodium aluminosilicate, the co–precipitation of Na–Al–Si can be promoted by adjusting the composition of the leaching solution to separate Si and Ge. Noteworthy, 73.97 % of Si have been removed by precipitation, while the precipitation ratio of Ge is only 8.77 %. Moreover, the Ge-containing solution is obtained with low Al–Si concentration (Al 0.37 g/L, Si 0.85 g/L and Ge 0.025 g/L). Overall, the obtained nano-microspherical non-dense cluster zeolite products have great potential for the removal of heavy metal ions from wastewater.

Removal of Heavy Metal Ions(Fe2+, Mn2+, Cu2+ and Zn2+) on to Activated Carbon Prepared from Kashmiri Walnut Shell (Juglans regia)

Heavy metal pollution poses significant threats to the environment and human health, even at trace concentrations. In this study, activated carbon derived from Kashmiri walnut shell (Juglans regia) was investigated for its potential to adsorb heavy metal ions (Fe2+, Mn2+, Cu2+, and Zn2+). Standard solutions containing heavy metal ions at concentrations ranging from 10 to 50 ppm were prepared for adsorption experiments, i.e., at temperature 25 °C, and adsorbent dosage 1 g using a column mechanism. The activated carbon was first treated with 0.1M HCl and 0.5M ammonia solutions, and then washed with demineralised water. Subsequently, the metal ion solutions were passed through the column individually, and the filtrates were analyzed for heavy metal ion presence. The experimental results demonstrated that walnut shell-derived activated carbon exhibited promising adsorption capacity spanning from 0.36 mg/g for Zn2+, 0.5 mg/g for both Mn2+ and Cu2+ and 0.54 mg/g for Fe2+ thus showing the adsorption trend as Fe2+ > Mn2+ = Cu2+ > Zn2+. This study highlights the potential of using walnut shell-derived activated carbon as an effective and cost-efficient method for mitigating heavy metal pollution in contaminated water sources.

Pilot-scale foam and cast-coated nanocellulose filters for water treatment

AbstractA large variety of substances, for instance heavy metal ions from different sources including mining, industry, and agricultural activities, pollute fresh water sources. Bio-based adsorbents, such as cellulose nanofibers (CNF), have recently been introduced in the process of treating water to remove hazardous pollutants primarily owing to their natural abundance, non-toxicity, and renewability. Surface modification of CNF, e.g. by catalytically oxidising the primary C6-OH groups of CNF selectively into carboxylic (COO−) groups with TEMPO, yields materials that are effective in adsorbing positively charged heavy metal ions, e.g. Cu ions. However, to utilise CNF in continuous processes beyond static, batch-wise adsorption, in particular on (pre-)industrial scale, they need to be immobilised on filter substrates in thin layers and an efficient manner. In this work, we report bio-adsorbent-based filters prepared by coating TEMPO-CNF on viscose filters using two different pilot-scale coating approaches, foam and cast coating. The performance of TEMPO-CNF filters was evaluated in terms of their water permeance as well as adsorption of metal ions including Cu(II) and Ca(II). By foam coating thin layers could be fabricated in a time efficient way facilitating high adsorption capacities (52 mg g−1), whilst by cast coating higher amounts of TEMPO-CNF could be deposited allowing for adsorbing higher absolute amounts (280 mg m−2) of heavy metal ions. Graphical abstract

Baryon Electric Charge Correlation as a Magnetometer of QCD.

The correlation between net baryon number and electric charge, χ_{11}^{BQ}, can serve as a magnetometer of QCD. This is demonstrated by lattice QCD computations using the highly improved staggered quarks with physical pion mass of M_{π}=135 MeV on N_{τ}=8 and 12 lattices. We find that χ_{11}^{BQ} along the transition line starts to increase rapidly with magnetic field strength eB≳2M_{π}^{2} and by a factor 2 at eB≃8M_{π}^{2}. Furthermore, the ratio of electric charge chemical potential to baryon chemical potential, μ_{Q}/μ_{B}, shows significant dependence on the magnetic field strength and varies from the ratio of electric charge to baryon number in the colliding nuclei in heavy ion collisions. These results can provide baselines for effective theory and model studies, and both χ_{11}^{BQ} and μ_{Q}/μ_{B} could be useful probes for the detection of magnetic fields in relativistic heavy ion collision experiments as compared with corresponding results from the hadron resonance gas model.

Unlocking the potential of phenolated kraft lignin as a versatile feed additive

Lignin, a renewable natural antioxidant and bacteriostat, holds promise as a versatile, cost-effective feed additive. However, traditional industrial lignin faces limitations, including low reactivity, poor uniformity, and unstable properties, necessitating chemical modification. Complex modification methods pose economic and toxicity challenges, so this study adopted a relatively simple alkali-catalyzed phenolization approach, using phenol, catechol, and pyrogallol to modify kraft lignin, and characterized the resulting products using various techniques. Subsequently, their antioxidant, antibacterial, adsorption properties for heavy metal ions and mycotoxins, growth-promoting properties, and antiviral abilities were assessed. The phenolation process led to lignin depolymerization and a notable increase in phenolic hydroxyl content, particularly in pyrogallol-phenolated lignin (Py-L), rising from 3.08 to 4.68 mmol/g. These modified lignins exhibited enhanced antioxidant activity, with over 99 % inhibition against E. coli and S. aureus, and remarkable adsorption capacities for heavy metal ions and mycotoxins. Importantly, Py-L improved the growth performance of mice and reduced influenza mortality. Furthermore, density functional theory calculations elucidated the mechanism behind the enhanced antioxidant properties. This study presents a promising avenue for developing versatile feed additives to address challenges related to animal feed antioxidant supplementation, bacterial control, and growth promotion.

Non-extensive statistics in Au-Au collisions

Particle production yields measured in central Au-Au collision at RHIC are obtained with free Fermi and Bose gases and also with a replacement of these statistics by non-extensive statistics. For the latter calculation, a set of different parameters was used with values of the Tsallis parameter q chosen between 1.01 and 1.25, with 1.16 generating the best agreement with experimental data, an indication that non-extensive statistics may be one of the underlying features in heavy ion-collisions.

Efficient adsorption of heavy metal ions chromium (III) by modified corn starch/GO composite aerogel

Efficient adsorption of heavy metal ions chromium (III) by modified corn starch/GO composite aerogel