Headless Screws Research Articles

Clinical and Functional Outcomes of Suture Versus Headless Screw Fixation for Tibial Eminence Fractures in Children

Background: Suture and screw fixations are widely used to treat tibial eminence fractures (TEFs). Although a few biomechanical and clinical studies have compared suture fixation (SF) and screw fixation in the treatment of TEFs in children, no comparative clinical studies are available regarding headless screw fixation (HSF). Purpose: To evaluate the clinical and functional outcomes of children with TEF who underwent SF and HSF. Study Design: Cohort study; Level of evidence, 3. Methods: The study included 24 patients treated with either SF (11 patients) or HSF (13 patients) within 1 month of TEF (type 2 or 3) without associated ligamentous and bone injury between 2015 and 2020. All patients were evaluated at a minimum 2-year follow-up in terms of Lysholm score, Tegner activity level, International Knee Documentation Committee subjective score, and isometric strength test. Knee stability was compared based on the Lachman test, pivot-shift test, and KT-1000 arthrometer side-to-side difference. Results: No significant differences were found between the 2 groups in terms of Lysholm score, Tegner activity level, and International Knee Documentation Committee subjective score at follow-up. All patients were able to resume their daily activities within 6 months after the injury. However, flexion deficits (6°-10°) were found in 2 patients in the SF group and 1 patient in the HSF group, and extension deficits (3°-5°) were found in 3 patients in the SF group and 1 patient in the HSF group, without significant intergroup difference. Stability based on the Lachman test, pivot-shift test, and KT-1000 arthrometer side-to-side difference was also similar between the 2 groups at follow-up. No statistically significant difference was found between the 2 groups in isometric tests performed. Conclusion: The present study is the first to compare the clinical and functional results of SF and HSF techniques. The HSF technique demonstrated comparable clinical and functional outcomes, suggesting its potential as an alternative to the SF technique.

Flexor Pollicis Longus Rupture After Scaphoid Fracture Repair: A Case Report

Background: Flexor Pollicis Longus (FPL) tendon attritional rupture is a rare diagnosis. Reported causes include distal radius plates, SNAC wrist, steroid injection and CMC1 arthrodesis hardware. We describe an FPL rupture 1 year after scaphoid waist fracture fixation. Case description: A 23-year-old male ruptured his FPL when it abraded on a headless compression scaphoid screw. After full union of the fracture hardware was removed and the ruptured FPL tendon was reconstructed with a palmaris longus graft.

Outcomes of Headless Screw Fixation for Coronal Hamate Fractures

AIM The aim of this study is to clarify the surgical technique and to evaluate postoperative outcomes of patients who underwent open reduction and internal fixation (ORIF) with headless screws for the coronal hamate fractures. MATERIAL AND METHOD A retrospective evaluation was performed on a total of 9 patients who underwent ORIF with headless screws for the coronal hamate fracture between 2018 and 2021. Demographic information, surgical details, and clinical follow-up data were systematically collected. Postoperative clinical assessments were carried out using the Michigan Hand Outcome Questionnaire (MHQ) and Disabilities of the Arm, Shoulder and Hand (DASH) scores. RESULTS The mean age at surgery was 37 years (range: 18-49), and the mean follow-up period was 34 months (range: 24-50). Among the 9 patients with coronal hamate fractures, 5 experienced fractures and/or dislocations involving the 4th and/or 5th metacarpal bones. The median overall MHQ and DASH scores were 76.2 (range: 52.5-97.9, IQR: 68.45-83.95) and 6.7 (range: 0-35, IQR: 1.65-10), respectively. The follow-up X-rays revealed favorable healing of the fractures. CONCLUSION Coronal hamate fracture fixation can be effectively managed through fixation with headless screws. It is essential to address both coronal hamate fractures and any accompanying metacarpal fractures/dislocations to ensure optimal hand function. Mid-term follow-ups have demonstrated satisfactory outcomes.

Articular Fragment Detachment and Separate Fixation for the Treatment of Comminuted Patellar Fractures with Coronal Split Articular Fragments: Articular Detachment Technique.

Treatment of comminuted patellar fractures accompanied by coronal split articular and inferior pole fragments is a challenge. To treat this difficult fracture, we perform articular fragment detachment and separate fixation for coronal split articular and inferior pole fragments. We aimed to evaluate the radiological and clinical outcomes of our technique in comminuted patellar fractures at least 1 year after surgery. Between January 2019 and June 2022, 15 patients diagnosed with comminuted patellar fractures accompanied by coronal split articular and inferior pole fragments based on preoperative computed tomography underwent surgery using the articular detachment technique. The key point of this technique was anatomical reduction and subchondral fixation of the coronal split articular fragment to the superior main fragment after complete detachment of the coronal split fragment from the inferior pole. The remaining inferior pole was fixed using a separate construct. Postoperative articular gap, articular step-off, and complications, including resorption, reduction loss, and avascular necrosis of fixed articular fragments, were evaluated as radiological outcomes. Range of motion and the Lysholm scores were used to evaluate clinical outcomes. Among the 15 patients, the coronal split articular fragments were fixed using Kirschner wires in 13 patients and headless screws in 2 patients. The inferior poles were fixed using separate vertical wiring in 13 patients and tension-band wiring in 2 patients. A postoperative articular gap was noted in 7 patients, with an average articular gap of 1.0 mm (range, 0.7-1.6 mm). No articular step-off was observed. Bone union and normal range of motion were achieved in all patients. On the 1-year postoperative lateral radiograph, resorption of the articular fracture site was seen in 5 patients. There was no loss of reduction or avascular necrosis of the coronal split articular fragments. The average postoperative Lysholm score at 1 year was 89.3 ± 4.1 (range, 82-95). The technique would be a reliable and safe option for the surgical treatment of comminuted patellar fractures accompanied by coronal split articular and inferior pole fragments in terms of anatomical reduction and stable fixation of articular fragments without risk of avascular necrosis.

Biomechanical comparison of headless compression screws versus independent locking screw for intra-articular fractures

PurposeHeadless compression screws (HCS) have a variable thread pitch and headless design enabling them to embed below the articular surface and generate compression force for fracture healing without restricting movement. Locking screws have greater variety of dimensions and a threaded pitch mirroring the design of the HCS. The objective of this study is to determine whether locking screws can generate compression force and compare the compressive forces generated by HCS versus locking screws.MethodA comparison between 3.5-mm HCS versus 3.5-mm locking screws and 2.8-mm HCS versus 2.7-mm locking screws was performed using a synthetic foam bone model (Synbone) and FlexiForce sensors to record the compression forces (N). The mean peak compression force was calculated from a sample of 3 screws for each screw type. Statistical analysis was performed using the one-way ANOVA test and statistical significance was determined to be p = < 0.05.ResultsThe 3.5-mm Synthes and Smith and Nephew locking screws generated similar peak compression forces to the 3.5-mm Acutrak 2 headless compression screws with no statistically significant difference between them. The smaller 2.7-mm Synthes and Smith and Nephew locking screws initially generated similar compressive forces up to 1.5 and 2 revolutions, respectively, but their peak compression force was less compared to the 2.8-mm Micro Acutrak 2 HCS.ConclusionLocking screws are able to generate compressive forces and may be a viable alternative to headless compressive screws supporting their use for intra-articular fractures.

Locking plate versus retrograde intramedullary headless compression screw for unstable extra-articular metacarpal base fractures of the thumb

The purpose was to compare clinical and radiological outcomes between two fixation techniques used to treat extra-articular fractures involving the base of the thumb metacarpal: retrograde intramedullary cannulated headless screw (RICHS) and locking plate (LP). Fifty-one patients who underwent RICHS (n = 22) or LP fixation (n = 29) from January 2010 through 2020 were included in this retrospective case-control study with mean follow-up 39 months. No inter-group differences were observed comparing mean time to radiological union, grip strength, range of motion, pain severity or QuickDASH scores. Mean surgery time was shorter with RICHS (18.9 min) than with LP fixation (44.4 min). Mean time to return to work or routine activities was less in RICHS than LP (22 vs. 32 days), as was the percentage of patients requiring hardware removal (0% vs. 44.8%). We conclude that RICHS fixation requires less operating time and yields faster post-operative return to full function and fewer secondary procedures.

Patient-Reported Outcome Measurement Information System Measures for Proximal Interphalangeal Joint Arthrodesis in Lesser Toe Deformities

Although hammertoe (HT) is a common complaint among foot patients, there is little consensus on the best surgical approach for correction. These authors hypothesized that the use of a headless intramedullary screw across both the proximal interphalangeal joint (PIPJ) and distal interphalangeal joint (DIPJ) would decrease many post-surgical complications, such as infection, pain, and mallet toe deformity, found in traditional HT corrective surgical techniques. In this retrospective cohort study, N = 163 adult patients who had undergone DIPJ/PIPJ arthrodesis for HT correction at least 1 year prior to the study were identified. One hundred fifty-nine patients were contacted through REDCap to complete Patient-Reported Outcome Measurement Information System (PROMIS) physical function (PF) and pain interference (PI). Demographic, radiographic, and follow-up data were taken from the electronic medical record (EMR). Analysis was completed with Microsoft Excel; PROMIS PF and PI measures for the 32-person cohort were 45.65 ± 8.26 and 51.65 ± 9.01, respectively. The PF and PI measures had a statistically significant correlation (R2 = 0.71). The 163-person cohort had an overall revision rate of 6.75%, or 11 patients, and an infection rate of 1.23%. This procedure had lower rates of residual pain, infection, mallet toe deformity, and reoperation when compared with current techniques. This study supports the safety and viability of PIPJ/DIPJ arthrodesis using a headless screw for HT correction. Levels of Evidence: Level III Retrospective Cohort Study

Cancellous bone graft from the distal radius and headless screw fixation for unstable scaphoid waist nonunion.

Cancellous bone harvested from the distal radius has been used in various hand surgeries, but studies on its use in scaphoid waist nonunions are insufficient. We investigated the usefulness of cancellous bone graft from the distal radius and headless screw fixation in unstable scaphoid waist nonunion. Thirty-one patients who underwent cancellous bone graft from the distal radius and headless screw fixation for unstable scaphoid waist nonunion with follow-up for at least 1year were included. Bone union time, the number of patients with bone union at six and 12weeks, total number of patients with bone union at last follow-up, and bone union on the computed tomography (CT) image at postoperative sixweeks were evaluated. Further, pre- and postoperative radiological measurements, such as scaphoid length and height, lateral intra-scaphoid angle, and height-to-length ratio, and functional outcomes were compared. Additionally, inter-observer reliability of radiologic parameters was checked. Bone union was achieved in 29 patients. There were two nonunions (6.5%). Bone union time was 10.7 (range, 6-26) weeks. Eighteen (58%) and 25 patients (80.6%) were diagnosed with bone union on the plain radiographs at six and 12weeks, respectively. Twenty-two patients (71%) were diagnosed with bone union on CT performed at sixweeks. Radiological measurements and functional outcomes improved postoperatively. The scaphoid length showed good inter-observer agreement. In treating unstable scaphoid waist nonunion, cancellous bone graft from the distal radius and headless screw fixation achieved 93.5% union and improved radiological measurements as well as functional outcomes.

Opposing Flanks vs Parallel Flanks – the Influence of Headless Screw Design on Compression and Pull- Out Resistance

Category: Basic Sciences/Biologics; Basic Sciences/Biologics Introduction/Purpose: Screws generate and maintain compression against distracting forces when performing osteotomy or fusion surgery. Headless screws with opposing flank angles (OFA) between the threads of the head and shaft are purported to achieve better compression. The purpose of this study was to compare OFA designs against traditional parallel flank angle (PFA) headless screws and headed screws to determine differences in compression and pull-out resistance (POR). Methods: In this biomechanical in-vitro study, four screw designs were compared: headless screws with OFA (Screw_A and Screw_B), headless screws with PFA (Screw_C), and headed screws (Screw_D). All screws were 4.0x50mm partially threaded cannulated screws. Screw_B had a 1.4mm shorter head length and 0.5mm narrower head thread diameter than Screw_A and Screw_C, which were similar. A custom apparatus was designed for measuring compression and POR. Osteotomies were created on synthetic bone blocks (density 0.32g/cm3) simulating cancellous bone. Screws were inserted perpendicular to osteotomies in accordance with manufacturer guidance and maximum compression recorded. Increasing distracting forces were then applied to the blocks until the screws pulled out. For each screw type, five screws were tested. Results: There was no significant difference in maximum compression between screw designs: Screw_A=38.7N±14.2N, Screw_B=48.7N±15.6N, Screw_C=51.9N±36.4N, Screw_D=32.0N±9.2N; p=0.921. When assessing POR, all screws failed at the head-bone interface (screw heads subsided into block). Pull-out forces significantly differed between all groups: Screw_A=466N±29.0N, Screw_B=310N±22.0N, Screw_C=399N±46.0N, Screw_D=183N±12.9N; p&lt; 0.001 (ANOVA). Screw_Ahad the highest POR but the other OFA design (Screw_B) had significantly lower POR. Conclusion: Screw design, whether headless (OFA or PFA) or headed did not appear to influence compression generated. However, headed screws had significantly lower POR than headless designs. Within headless designs, OFA may increase POR, but other screw head features (number / diameter of threads) had an apparently greater influence than flank angle.

Thickness of simple calcaneal tuberosity avulsion fractures influences the optimal fixation method employed.

This study aimed to establish the optimal fixation methods for calcaneal tuberosity avulsion fractures with different fragment thicknesses in a porcine model. A total of 36 porcine calcanea were sawed to create simple avulsion fractures with three different fragment thicknesses (5, 10, and 15 mm). They were randomly fixed with either two suture anchors or one headless screw. Load-to-failure and cyclic loading tension tests were performed for the biomechanical analysis. This biomechanical study predicts that headless screw fixation is a better option if fragment thickness is over 15 mm in terms of the comparable peak failure load to suture anchor fixation (headless screw: 432.55 N (SD 62.25); suture anchor: 446.58 N (SD 84.97)), and less fracture fragment displacement after cyclic loading (headless screw: 3.94 N (SD 1.76); suture anchor: 8.68 N (SD 1.84)). Given that the fragment thickness is less than 10 mm, suture anchor fixation is a safer option. Fracture fragment thickness helps in making the decision of either using headless screw or suture anchor fixation in treating calcaneal tuberosity avulsion fracture, based on the regression models of our study.

Antegrade Posterior Column Acetabulum Fracture Screw Fixation via Posterior Approach: A Biomechanical Comparative Study.

Background and Objectives: Minimally invasive surgeries for acetabulum fracture fixation are gaining popularity due to their known advantages versus open reduction and internal fixation. Antegrade or retrograde screw fixation along the long axis of the posterior column of the acetabulum is increasingly applied in surgical practice. While there is sufficient justification in the literature for the application of the anterior approach, there is a deficit of reports related to the posterior approach. The aim of this study was to evaluate the biomechanical competence of posterior column acetabulum fracture fixation through antegrade screw placement using either a standard cannulated screw or a cannulated compression headless screw (CCHS) via posterior approach. Materials and Methods: Eight composite pelvises were used, and a posterior column acetabulum fracture according to the Letournel Classification was simulated on both their left and right sides via an osteotomy. The sixteen hemi-pelvic specimens were assigned to two groups (n = 8) for either posterior column standard screw (group PCSS) or posterior column CCHS (group PCCH) fixation. Biomechanical testing was performed by applying steadily increased cyclic load until failure. Interfragmentary movements were investigated by means of motion tracking. Results: Initial stiffness demonstrated significantly higher values in PCCH (163.1 ± 14.9 N/mm) versus PCSS (133.1 ± 27.5 N/mm), p = 0.024. Similarly, cycles and load at failure were significantly higher in PCCH (7176.7 ± 2057.0 and 917.7 ± 205.7 N) versus PCSS (3661.8 ± 1664.5 and 566.2 ± 166.5 N), p = 0.002. Conclusion: From a biomechanical perspective, CCHS fixation demonstrates superior stability and could be a valuable alternative option to the standard cannulated screw fixation of posterior column acetabulum fractures, thus increasing the confidence in postoperative full weight bearing for both the patient and treating surgeon. Whether uneventful immediate postoperative full weight bearing can be achieved with CCHS fixation should primarily be investigated in further human cadaveric studies with a larger sample size.

Biomechanical Evaluation of Transverse Patella Fracture Fixation using Headless Screws: A Comparison of Suture vs. Cable as a Tension Band.

To explore the performance of headless screws with FiberWire Suture as a tension band and headless screws with a mini-cable tension band in patella fixation. A transverse osteotomy was created in six matched pairs of fresh-frozen cadaver knee joints. One knee was randomly assigned to receive fixation with headless screws plus a cable tension band (Synthes 1.3 mm cable with crimp), while the other was fixed with headless screws plus a suture tension band (#5 FiberWire). Using a servo-hydraulic material testing system, the specimens were first tested non-destructively under 20% of the reported mean failure load with standard technique of cannulated screws with tension band wiring. The specimen was then loaded to 1000 N to test the construct's failure strength. All tests were run under displacement-control with loading threshold. A motion analysis system was used to track the interfragmentary motion to assess fixation stability. The correlation between fixation strength and score of bone density was also examined. In the non-destructive loading test, gap displacement under 150N was 0.10 mm or less for 11 of 12 specimens, and the difference between the two groups was not statistically significant. In the destructive test, 3 of 12 specimens maintained reduction (gap<2mm) at the maximum load of 1000 N. Of the failed specimens, the mean strength was 648±185 N for suture and 784±228 N for cable (p=0.24). Regression analysis shows bone density was associated with the failure load of the tendon (R2=0.43, p=0.02). There was no significant difference in fixation strength or sub-failure fragment displacement between the suture and cable tension band techniques when using headless screws, but suture on average was weaker.

Intra-Articular Antegrade Intramedullary Screw Fixation for Proximal Phalanx Fractures: Impact of Articular Surface Defects on Joint Contact Pressures.

Intramedullary headless screw fixation is increasingly used for fixation of proximal phalanx fractures. However, the impact of screw entry defects on joint contact pressures is not well defined and may have implications for arthrosis. The objective of this cadaveric biomechanical study was to assess joint contact pressures at the metacarpophalangeal (MCP) joint before and after passage of 2 sizes of antegrade intramedullary fixation. Seven fresh frozen cadaver specimens without arthritis or deformity were included in this study. Antegrade intramedullary screw fixation of proximal phalanx fracture was simulated using an intra-articular technique. Flexible pressure sensors were inserted into the MCP joints and cyclic loading was performed. Peak contact pressures were determined and averaged across loading cycles for each finger in the native state, with 2.4- and 3.5-mm drill defects in line with the medullary canal. Peak pressure increased with the size of the drill hole defect. Contact pressure increases were greater in extension, with peak contact pressures increased by 24% for the 2.4-mm defect and 52% for the 3.5-mm defect. Increase in peak contact pressure was statistically significant with a 3.5-mm articular defect. Contact pressures were not consistently increased for the 2.4-mm defect. Testing in flexion of 45° resulted in reduced contact pressure for these defects. Our study demonstrates that antegrade intramedullary fixation of proximal phalanx fractures can increase MCP joint peak contact pressures, particularly in an extended joint position. Effect increases with defect size. This has implications for the management of proximal phalanx fractures using this technique.

A technical note on percutaneous fixation of trapezium fracture under gravitational traction

Trapezium fractures rarely present as isolated fractures and warrant anatomical fixation to minimize post-traumatic arthritis. Fixation techniques reported include open approach to trapezium fracture and fixation, percutaneous fixation under image intensifier guidance or percutaneous arthroscopic fixation under gravitational traction. We have reported a novel method of percutaneous fixation of a trapezium Walker type IV coronal split fractures under gravitational traction and per-operative image intensifier guidance. Two percutaneous headless differential pitch screws were used for fixation, which was off-loaded using an inter-metacarpal K-wire. Patient was discharged on the same day with a light-weight cast. The fixation yielded acceptable reduction of the articular surface as confirmed by radiographs. The cast and off-loading K-wire were removed at four weeks post-surgery and hand therapy was commenced. 3-month review showed optimal radiological healing with excellent return to function without pain. In conclusion, using gravitational traction can allow percutaneous fixation of trapezium fractures with excellent results and also make an otherwise complex procedure simpler. Level of EvidenceIV.

Intramedullary Fixation with Cannulated Screw After Resection of Enchondroma in the Hand: Technique Description and Case Series

Enchondromas are primary, benign bone neoplasms that arise from intramedullary proliferation of hyaline cartilage cells. Slow and progressive in growth, enchondromas can lead to bone destruction, deformities, and fractures. The treatment of enchondromas remains controversial. We hereby describe the technique for bone fixation using headless intramedullary screws (HISs) after enchondroma resection in the long bones of the hand. From January 2018 to June 2021, all patients treated with HISs after the resection of enchondroma of the hand were retrospectively assessed and included in the study. The series comprised four patients with a minimum postoperative follow-up period of 12 months. Postoperative functional results were measured according to Takigawa criteria and postoperative radiographic results were graded according to the Tordai system. After tumor resection and screw fixation, one patient had autologous bone grafting from the iliac crest, and another had the defect filled with calcium phosphate cement. All patients were followed up for at least 12 months, and the mean healing time of the pathologic fracture was 5 weeks. There were neither complications related to the procedure nor the need for a second surgery. We describe the technique of intramedullary headless screws for bone fixation after enchondroma resection in the long bones of the hand, as well as the excellent functional, cosmetic, and radiographic results of four patients treated with the technique presented herewith. Therapeutic IV.

Segmental Scaphoid Fracture treated with One Headless Screw: A Case Report

Segmental Scaphoid Fracture treated with One Headless Screw: A Case Report

Evaluation of Cannulated Compression Headless Screw (CCHS) as an alternative implant in comparison to standard S1-S2 screw fixation of the posterior pelvis ring: a biomechanical study

Background/PurposePosterior pelvis ring injuries represent typical high-energy trauma injuries in young adults. Joint stabilization with two cannulated sacroiliac (SI) screws at the level of sacral vertebrae S1 and S2 is a well-established procedure. However, high failure- and implant removal (IR) rates have been reported. Especially, the washer recovery can pose the most difficult part of the IR surgery, which is often associated with complications.The aim of this biomechanical study was to evaluate the stability of S1-S2 fixation of the SI joint using three different screw designs.MethodsEighteen artificial hemi-pelvises were assigned to three groups (n = 6) for SI joint stabilization through S1 and S2 corridors using either two 7.5 mm cannulated compression headless screws (group CCH), two 7.3 mm partially threaded SI screws (group PT), or two 7.3 mm fully threaded SI screws (group FT). An SI joint dislocation injury type III APC according to the Young and Burgess classification was simulated before implantation. All specimens were biomechanically tested to failure in upright standing position under progressively increasing cyclic loading. Interfragmentary and bone-implant movements were captured via motion tracking and evaluated at four time points between 4000 and 7000 cycles.ResultsCombined interfragmentary angular displacement movements in coronal and transverse plane between ilium and sacrum, evaluated over the measured four time points, were significantly bigger in group FT versus both groups CCH and PT, p ≤ 0.047. In addition, angular displacement of the screw axis within the ilium under consideration of both these planes was significantly bigger in group FT versus group PT, p = 0.038. However, no significant differences were observed among the groups for screw tip cutout movements in the sacrum, p = 0.321. Cycles to failure were highest in group PT (9885 ± 1712), followed by group CCH (9820 ± 597), and group FT (7202 ± 1087), being significantly lower in group FT compared to both groups CCH and PT, p ≤ 0.027.ConclusionFrom a biomechanical perspective, S1-S2 SI joint fixation using two cannulated compression headless screws or two partially threaded SI screws exhibited better interfragmentary stability compared to two fully threaded SI screws. The former can therefore be considered as a valid alternative to standard SI screw fixation in posterior pelvis ring injuries. In addition, partially threaded screw fixation was associated with less bone-implant movements versus fully threaded screw fixation. Further human cadaveric biomechanical studies with larger sample size should be initiated to understand better the potential of cannulated compression headless screw fixation for the therapy of the injured posterior pelvis ring in young trauma patients.

A Novel Mini-Invasive Technique of Arthroscopic-Assisted Reduction and Robot-Assisted Fixation for Trans-Scaphoid Perilunate Fracture Dislocations.

Perilunate injuries are rare but devastating carpal injuries. The treatment of perilunate injuries remains challenging and contentious. This study aims to describe a novel mini-invasive surgical technique of arthroscopic-assisted reduction and robot-assisted fixation for the treatment of trans-scaphoid perilunate fracture dislocations (PLFDs). We retrospectively reviewed patients with PLFDs after surgical treatment from February 2021 to March 2021. The patients underwent arthroscopic-assisted precise reduction and robot-assisted headless screw fixation. Times of guide wire placement were recorded intraoperatively. Periodic follow-up was performed until union of scaphoid fracture was confirmed. Range of motion of the wrist, grip strength, the Visual Analog Scale (VAS) score, the Mayo Wrist Score, the Quick Disabilities of Arm, Shoulder, and Hand (QuickDASH) score, the Patient-Rated Wrist Evaluation (PRWE), and osteoarthritis were evaluated at the final follow-up. Two male patients presenting with PLFDs with an average age of 24.5 years old (32 and 17 years) were included in this study. Intraoperatively, anatomic reduction of the scaphoid fracture was achieved under arthroscopic guidance. A robotic-assisted single-attempt guidewire insertion was performed for scaphoid fracture and lunotriquetral interval. The CT scans at 8 and 12 weeks showed the union of the scaphoid fracture. At final mean follow-up of 13.5 months, the extension, radial-ulnar deviation, and pronation-supination were consistent with the contralateral side in both patients. One patient experienced mild limited range of motion with the flexion 46° of the injured wrist compared with 81°of the contralateral wrist. The VAS score was 0 and 2. The grip strength was 32 and 26 kg compared with 24 and 42 kg of the contralateral wrist. The PRWE score was 13 and 10 and the QuickDASH score was 2 and 7. The Mayo Wrist Score was 100 and 65. No sign of osteoarthritis was found at the last follow-up. Arthroscopic-assisted reduction and robot-assisted fixation is a viable and promising alternative for the treatment of perilunate fracture dislocations. This technique allows precise reduction and accurate placement of the K-wires/screws into the carpal bones through the optimal biomechanical paths.

Cancellous compression bone grafting using headless screw as a strut in scaphoid nonunion by a single volar approach

PurposeAn array of fixation and grafting techniques for scaphoid nonunion have been described over time, achieving varied results pertaining to union and scaphoid alignment. The aim of this study was to check for union rates and correction of scaphoid parameters achieved by our technique of using screw as a strut and cancellous compression grafting harvested from the distal radius by a single volar approach.MethodsRetrospective analysis of all patients operated by the said technique was done from 2013 to 2019. Thirty-eight patients including 36 males and two females in the age range of 20–56 years were analyzed. Union rates, change in scaphoid alignment parameters and graft site characteristics were documented.ResultsOf the patients analyzed, 5/38 were nonunions of proximal pole, 19/38 of waist and 14/38 were of distal pole which included nonunions of cystic type or with humpback deformity. Patients were followed up for an average of 22.2 months and union was achieved in all cases with a mean period of 15.7 ± 3.7 weeks. There was significant improvement in the scaphoid alignment postoperatively. One case of implant migration and one case of scaphoid nonunion advanced collapse were noted. The mean duration of donor site healing was noted to be 16.9 ± 2.5 weeks except two outliers which took longer time. There were no cases of donor site fracture or other complications.ConclusionUnion rates, correction of scaphoid parameters and minimal complications justifies this technique as a novel one in the management of scaphoid nonunion at all levels, with minimal donor site morbidity and attained by the single volar approach.

Evaluation of cannulated compression headless screws as an alternative implant for superior pubic ramus fracture fixation: a biomechanical study

Background/purposePubic ramus fractures account for the most common types of pelvic fractures. The standard surgical approach for superior pubic ramus fractures (SPRF) is a minimally invasive percutaneous screw fixation. However, percutaneous closed reduction and internal fixation of anterior pelvic ring injuries have high failure rates of up to 15%. The aim of this biomechanical study was to evaluate the stability of SPRF following stabilization with retrograde placed cannulated compression headless screw (CCHS) versus conventional fully and partially threaded screws in an artificial pelvic bone model.MethodsSPRF type II as described by Nakatani et al. was created by means of osteotomies in eighteen anatomical composite hemi-pelvises. Specimens were stratified into three groups of six specimens each (n = 6) for fixation with either a 7.3 mm partially threaded cannulated screw (group RST), a 7.3 mm fully threaded cannulated screw (group RSV), or a 7.5 mm partially threaded cannulated CCHS (group CCS). Each hemi-pelvic specimen was tested in an inverted upright standing position under progressively increasing cyclic axial loading. The peak load, starting at 200 N, was monotonically increased at a rate of 0.1 N/cycle until 10 mm actuator displacement.ResultsTotal and torsional displacement were associated with higher values for RST versus CCS and RSV, with significant differences between RST and CCS for both these parameters (p ≤ 0.033). The differences between RST and RSV were significant for total displacement (p = 0.020), and a trend toward significance for torsional displacement (p = 0.061) was observed. For both failure criteria 2 mm total displacement and 5° torsional displacement, CCS was associated with significantly higher number of cycles compared to RST (p ≤ 0.040).ConclusionCCHS fixation presented predominantly superior stability to the standard surgical treatment and could therefore be a possible alternative implant for retrograde SPRF screw fixation, whereas partially threaded screws in group RST were associated with inferior biomechanical stability.