Headless Compression Screws Research Articles

Fixation of Hand Fractures with Intramedullary Headless Compression Screws.

Metacarpal and phalangeal fractures remain among the most frequently encountered orthopedic injuries, accounting for 10% of all fractures. For operative fractures, there is an array of treatment options with percutaneous kirschner wire stabilization and screw and plate fixation strategies predominating. Recently, a new fixation method was introduced, intramedullary (IM) fixation with headless screws, which has advantages of a percutaneous technique and buried hardware. The purpose of this review is to highlight the indications and surgical techniques of IM screw fixation of metacarpal and phalangeal fractures. Although more research is needed, IM fixation represents a potentially reliable alternative to Kirschner-wire and plate fixation.

Comparative study on the effectiveness of bone grafting for arthrodesis of the thumb carpometacarpal arthritis.

The aim of this retrospective study was to assess the effectiveness of autogenous bone grafting for arthrodesis of the thumb carpometacarpal joint by comparing the bone union rates with and without bone grafting. We included 36 patients who underwent arthrodesis of the thumb carpometacarpal joint for arthritis (20 patients with bone grafts and 16 without bone grafts). Implants used for internal fixation were K-wire, tension band wiring, headless compression screw and locking plate. The presence of bone union and the time from surgery to bone union were evaluated. The bone union rate was 20/20 (100%) in the bone grafting group and 12/16 (75%) in the non-bone grafting group (p = 0.03). There were no significant differences between the two groups in the time from surgery to bone union and patient characteristics. In conclusion, autogenous bone grafting may contribute to the bone union in the arthrodesis of thumb carpometacarpal arthritis.Level of evidence: III.

Percutaneous Retrograde Technique Using Intramedullary Headless Compression Screws for Metacarpal Fractures Under Wide-Awake Local Anaesthesia No Tourniquet.

Background The common modality of treatment of metacarpal fractures is nonsurgical. There are, however, a subset of patients and fracture types that require surgical correction, but surgery comes with its own problems like stiffness and scarring. Therefore, surgical operations must be minimally invasive barring complications of anaesthesia and the procedure. Therefore, we conducted this study to assess patient outcomes following treatment with percutaneous intramedullary screw fixation via the wide-awakelocal anaesthesiano tourniquet (WALANT) approach for unstable metacarpal fractures. Methodology We retrospectively analysed the records of 21 patients who received metacarpal fixations with headless compression screws at two district general hospitals in the United Kingdom from 2018 to 2020. We used wide-awake anaesthesia with 10 mL (1% lidocaine and 1 mL 8.4% sodium bicarbonate as a buffer) infiltrated around the superficial tissues on the dorsal aspect of the metacarpal bone, including the periosteum. The Jahss manoeuvre was used to reduce the fracture under the guidance of a mini C-arm. All patients had 3-mm Medartis cannulated compression screws (Medartis AG, Basel, Switzerland) (self-tapping) inserted retroactively using a 5-mm skin incision. The range of movement of the metacarpophalangeal joint was checked intraoperatively and shown to the patient for optimal postoperative rehabilitation. Patients underwent a two-week follow-up wound check and examination for pain (using the visual analogue scale (VAS)) or stiffness requiring physiotherapy. We used the Manchester-modified (M2) disability of the arm, shoulder, and hand (DASH) score to scrutinize the fracture union and the functional outcome of the hand. We also assessed the time to return to work. Results The study included 18 men and two women with a mean age of 22.6 years (range, 18 to 40). The fifth (n=16), fourth (n=4), and second metacarpals (n=1) were involved, and we saw transverse (n=10) and short oblique (n=11) fractures. Fractures healed in five weeks (range, four to six weeks). The mean M2 DASH score was 0.8 (range, 0 to 6), and mean total active motion was 240° (range, 230° to 260°). At the final follow-up, the mean extensor lag for the metacarpophalangeal joint was 5° (range, 0° to 15°), 7° for the proximal interphalangeal joint (range, 0° to 15°), and no lag at the distal interphalangeal joint. The average VAS score at the end of two weeks was 8/10 (range, 7 to 9). The average time for the return to daily activities was 2.56 weeks. We found no intraoperative complications in any of the patients. All patients went home on the same day postoperatively and gave feedback that their experience with WALANT was good to excellent. All patients had a good range of motion at the two-week follow-up, and the mean time to return to normal work was two to three weeks. The M2 DASH score measured was satisfactory. Conclusions This retrospective study assessed patient outcomes following treatment with percutaneous intramedullary screw fixation via the WALANT approach for unstable metacarpal fractures. WALANT was a quick and reliable alternative to fix unstable metacarpal fractures, especially for high-demand patients requiring a short recovery period before returning to regular activity.Further research with a larger sample size and a longer follow-up to analyse the outcome is warranted before an actual guideline can be established.

Biomechanical Comparison of Headless Compression Screws, Kirschner Wires and Bioabsorbable Pins in Distal Oblique Metatarsal Osteotomy for Correction of Hallux Valgus.

Distal osteotomy of the first metatarsal is a widely used method for the correction of mild-to-moderate hallux valgus deformities. The objective of this study was to compare the stability of headless compression screws, kirschner wires and absorbable pins in terms of stiffness and maximum load in distal oblique metatarsal osteotomy. A total of 30 4th generation first metatarsal synthetic bone models were divided into three groups according to the fixation techniques. The stiffness of the first metatarsal was calculated as the slope of the linear curve that fit with the first linear part of the force displacement curve. The failure strength was recorded as the maximum load. The stiffness and maximum load values in the axillary and transverse configurations were compared between the three fixation groups. The stiffness was statistically higher in Group K and Group C compared to Group B in both axial and transverse loading. Similarly, the maximum load was significantly higher in both Group K and Group C compared to Group B in both loading conditions. No significant difference was found between Group K and Group C in stability. The higher failure strength was obtained with headless compression screws (113.34±35.88 N) in the axial loading. The lowest failure strength was found in the absorbable pins technique (16.17±7.72 N) in the transverse loading. No significant difference was found between the Kirschner wires and headless compression screws techniques, although the highest strength was obtained with headless compression screws that are increasingly used in orthopedic practice.

Fracture of the lateral process of the talus with associated deltoid ligament injury: a report of 2 cases

BackgroundFractures of the lateral process of the talus (LTPF) are rare and only rarely are associated ligamentous injuries. The injury mechanism is commonly considered to be similar with ankle sprains, where excessive varus of the hindfoot leads to avulsion fractures of the lateral process of the talus. However, previous cadaveric studies have suggested that LTPF was more likely to be caused by eversion or external rotation force with dorsiflexion of the ankle. But no clinical evidence has been provided.Case presentationTwo patients presented to the emergency department with ankle pain after ankle eversion or external rotation. Physical examination revealed tenderness and swelling on both medial and lateral sides of the ankles. Plain radiographs and computed tomography revealed LTPF and medial soft tissue swelling, and magnetic resonance imaging confirmed a discontinuity of the deltoid ligament in Case 1. Surgical exploration revealed rupture of the superficial layer of the deltoid ligaments with intact deep layer in both patients. Treatment included fixation of the lateral process of the talus with headless compression screws and repair of deltoid ligaments. Both patients achieved excellent clinical outcomes 1 year post injury.ConclusionThere are many possibilities of the injury mechanism of LTPF. These two cases provided clinical evidence that eversion or external rotation force, in addition to inversion, was also an important mechanism of LTPF.

Intra-medullary Cannulated Headless Compression Screw for Bone Graft Fixation in Metacarpal Fractures.

High energy metacarpal fracture presenting with critical bone loss requires bone graft and hardware stabilisation. Early bone grafting and rigid internal fixation allow expedited patient recovery. Plate fixation is the most described technique when an autologous bone graft is being used. In this report, we present an alternative technique to secure bone grafts to metacarpal shafts with intra-medullary headless compression screws (HCS). In the presented patient, significant bone defects of the fourth and fifth metacarpals were bridged using iliac crest cortico-cancellous bone grafts and fixed with HCS. This method of fixation allowed controlled early active mobilisation. Bone graft incorporation and excellent active range of motion were demonstrated. Level of Evidence: Level V (Therapeutic).

Finite Element Analysis for First Metatarsophalangeal Joint Arthrodesis Demonstrates Reduction in Stress Across Bio-Integrative Fixation Over Traditional Metal Fixation

Category: Midfoot/Forefoot; Bunion Introduction/Purpose: During each step-in gait, the first metatarsophalangeal joint (MTPJ) is stressed by 90% of body weight, while loading the metatarsal head and base with up to 29% (228N/80Kg patient) of body weight (188N) during each foot push-off. To withstand these high mechanical forces, a successful fusion is dependent on joint preparation and rigid fixation. In this study we assessed a novel bio-integrative fiber-reinforced screw and nail construct. This material technology may provide improved mechanical fixation profile through its high flexural strength and flexural modulus that is closely matched to that of cortical bone. Finite Element Analysis (FEA) was performed to evaluate the mechanical strength and stress concentrations acting on the 1st MTPJ fusion following the use of these implants, compared to conventional metal fixation. Methods: CT-based FEA of the 1st MTPJ fusion fixed by two fixation methods was simulated for mechanical strength and stress concentrations acting on the surrounding cortical bone. The 1st MTPJ of an adult male weighing 80kg was segmented from a left foot CT scan (120 KVP, SL 1mm) and was incorporated in a 3-dimensional CAD model. Bio-integrative fiber-reinforced 4.0mm partially threaded headless compression screw, and a 3.0mm fiber-reinforced cannulated nail were inserted in this computational model in crossed fashion (Fig. 1A). The bio-integrative implants are composed of continuous reinforcing mineral fibers (50% w/w), comprised of elements found in native bone and bound together by a degradable polymer [poly (L-lactide-co- D,L-lactide), PLDLA]. Two 4.0mm partially threaded headless titanium screws were inserted in similar trajectories and served as control (Fig. 1B). The FEA algorithm was based on published known forces acting on the first ray during push-off. Post-processing was performed on FEA results. Results: The relative displacement between the Metatarsal and Phalangeal heads upon simulated loading was 1.6mm for metal fixation and 0.2mm for the fiber-reinforced bio-integrative fixation, demonstrating this technology to be mechanically stable at least as conventional metal fixation. In both models, the Von-Mises maximum stresses were found between the implant thread and shank. However, maximum localized stresses in cortical bone regions interacting with the metal implants were substantially higher (up to 8 times) compared to the bio-integrative implant-bone interactions. Moreover, stresses in the implant body were remarkably higher with metal implants compared to bio-integrative fixation (Fig. 1C, D&E). These results indicate that for physiological loading conditions applied on the 1st MTPJ, the use of bio-integrative fixation construct may reduce stress concentrations at the implant-cortical bone interface. Conclusion: FEA results indicate that bio-integrative screw-nail construct provides equivalent mechanical fixation strength to metal fixation, while resulting in lower bone-implant stress concentrations. The closely matched flexural modulus of the bio- integrative material to that of cortical bone, decreases implant-bone resistance level and the probability of bone/implant failure and risk for implant loosening, all common complications in foot and ankle surgery. This study demonstrates a new methodology of CT-FEA for the evaluation of 1st MTPJ fusion arthrodesis and suggests the bio-integrative screw-nail combination as an alternative to traditional metal fixation. This model is currently being investigated in an ongoing clinical series.

Isolated trochlear shear fracture of the distal humerus: a case report

<p class="abstract">Laugier was the first to describe an isolated humeral trochlea fracture in 1853. We report the case of a patient with an isolated fracture of the trochlea and discuss the underlying mechanisms and the clinical, radiological features of this pathology and surgical management of this rare fracture. The elbow arthrotomy was done via an anteromedial approach, with the interval through the flexor-pronator muscles medially and the brachialis muscle laterally. The trochlea was temporally fixed by two Kirschner wires, and the definitive fixation was obtained by two cannulated. Herbert screws from anterior to posterior. The elbow was immobilized and splinted in a flexed position (70 degrees) for two weeks to allow soft tissue healing and minimize pain. After cast removal, rehabilitation of elbow was established and actively assisted mobilization for three months. The isolated trochlea fracture is a rare injury and usually, it is associated with other injuries such as elbow dislocation. Few studies in the literature described such fracture and the anteromedial approach; most of these studies described the use of a direct medial approach to the elbow. Several fixation methods were described in the literature, including k-wires, AO compression screws, and headless compression screws. Isolated fracture of the trochlea is rare. The mechanisms causing this fracture are complex; the usual mechanism of isolated trochlear fractures is falling on the palm with the elbow extended and supinated. In our report, the patient disclosed that he felt directly on his flexed elbow. Trochlear fractures require open reduction and internal fixation to achieve anatomical reduction, with excision of the small osteochondral fragments that may be complicated by arthritic changes.</p>

Biomechanical Comparison of a Headless Compression Screw Fastener and AO Cortical Bone Screw for Fixation of a Simulated Equine Third Carpal Bone Slab Fracture

Frontal plane slab fractures account for the majority of third carpal bone (C3) fractures in racing and performance horses. Recommended treatment is stabilization with a lagged AO cortical screw. Associated complications are fragment splitting, fragment spinning, and irritation of dorsal soft tissue structures. A novel, headless, cannulated screw with interlocking threads the Headless Compression Screw Fastener (HCSF) has been developed to resist multidirectional forces and bending moments; however, it has not been applied in the horse. Simulated C3 frontal plane slab fractures were created in nine paired carpi from equine cadaver limbs, fixed with either the HCSF or AO cortical bone screw, and loaded in shear to failure. The effect of screw type on stiffness, maximum load to failure, and yield load was assessed in separate linear mixed models. No significant (P< .05) difference between screw types was detected in terms of maximum load to failure (P= .084), stiffness (P= .26), or yield load (P= .088). Mode of failure was screw bending in all specimens. For some samples in both groups, failure was associated with the sagittal fracture at the screw-bone interface. The HCSF was successfully used to repair simulated third carpal bone fractures. The different head and thread pitches of the HCSF effectively compressed the fracture. The headless design eliminates the need for counter sinking. There was no significant difference in maximum load to failure, stiffness, nor yield load compared to the cortical screws. These results invite clinical application to be investigated.

Articular Involvement With Retrograde Headless Compression Screw Fixation of the Metacarpal

Retrograde headless compression screw (RHCS) fixation for metacarpal fractures can lead to metacarpal head articular cartilage violation. This study aimed to quantify the articular surface loss after insertion of the RHCS and determine the functional range of motion (ROM) of the metacarpophalangeal (MCP) joint at the point of contact between the proximal phalangeal (P1) base and the articular defect. Ten fresh-frozen cadaveric hand specimens were analyzed for prefixation MCP joint ROM. After screw insertion, the ROM at which the dorsal portion of the P1 base begins to engage the screw tract defect, as well as the ROM at which the midsagittal portion of the P1 bisector engages the screw tract defect, was recorded. The distal axial articular surface of the metacarpal and the defects from screw insertion were measured using a digital image software program. Nine men and one woman (mean age, 69 years) were examined. The prefixation mean extension-flexion arc for all MCP joints ranged from 1° to 85°. After screw insertion, the mean MCP ROM at which the dorsal P1 articular surface first engaged the screw tract was 31°. Only 7 digits had screw tract engagement with the midsagittal bisector of the P1 base at a mean flexion angle of-18° (18° hyperextension). Mean articular surface violation increased from the index finger moving ulnarly, with an average of 3.9% involvement. Articular surface loss of the metacarpal head following RHCS insertion is negligible in a cadaveric model, with minimal engagement between the corresponding defect and the P1 base during functional ROM. Retrograde headless compression screw fixation of metacarpals inevitably damages the cartilage. However, the actual defect is small in proportion to the articular surface area and not engaged during functional activity. These biomechanical features maymitigate the surgeon's concern about joint destruction, while ensuring the benefits ofearly rehabilitation and minimal invasiveness of this technique.

Risk factors in distal interphalangeal joint arthrodesis in the hand: a retrospective study of 173 cases.

In this retrospective study we aimed to analyse the risk factors for complications after different methods of distal interphalangeal arthrodesis in the hand. Forty-four percent were treated with K-wire/cerclage fixation, 46% with X-fuse® implants (Stryker GmbH, Selzach, Switzerland) and 10% with headless compression screws (HBS®-screw, KLS Martin Group, Tuttlingen, Germany). The median follow-up was 16weeks (range 6-224). The overall complication incidence was 44% (minor complications 29% and major 15%). The logistic regression showed that osteoarthritis, revisional arthrodesis and smoking had a negative impact on the total complication incidence. A Cox-regression analysis showed that HBS®-screw arthrodesis was associated with a significantly lower incidence of major complications compared with K-wire/cerclage and X-Fuse®-arthrodesis. Revisional arthrodesis was five times more frequently connected with major complications than primary surgery. Smokers were three times more likely to experience major complications than non-smokers. We conclude that arthrodesis of the distal interphalangeal joint often leads to complications. Risk factors must be kept in mind.Level of evidence: III.

A Biomechanical Comparison of Fixation Techniques in Metacarpal Shaft Fractures.

Background Typically, metacarpal shaft fractures are treated with closed reduction percutaneous pinning, intramedullary nails, or plate fixation. Recently some surgeons have begun using intramedullary headless compression screws. Questions/Purposes The purpose of this study was to compare intramedullary screw fixation to K-wire fixation, which is the standard of care in a transverse metacarpal midshaft fracture, using a cadaveric model. Our hypothesis was that intramedullary screw fixation would have a biomechanical advantage (higher stiffness and peak load to failure) when compared with dual Kirschner wire fixation of transverse metacarpal shaft fractures. Methods Four-point bend testing was performed to compare stiffness and failure load values of seven paired 2nd and 3rd metacarpals instrumented with headless intramedullary compression screw fixation or Kirschner wire fixation. Similar testing was performed on 14 unpaired 4th metacarpals. Results There was no significant difference in peak load ( p = 0.60) or stiffness ( p = 0.85) between fixation groups for the 2nd and 3rd instrumented metacarpals. For the instrumented 4th metacarpals, there was no significant difference in peak load ( p = 0.14), but the stiffness was significantly greater ( p = 0.01) for the compression screw group compared with the Kirschner wire fixation. Conclusions/Clinical Relevance In this study, the load to failure was not different between the two fixation methods and likely both techniques can sustain physiologic loads needed for rehabilitation. The greater stiffness in the 4th metacarpal compression screw group may be related to the smaller canal morphology than in the 2nd and 3rd metacarpals. Larger diameter screws may be needed to obtain a better fit particularly in the 2nd and 3rd metacarpals.

Coronally Oriented Intra - Articular Distal Femur Hoffa Fracture - How We Deal with It

BACKGROUND&#x0D; Hoffa fractures are intra-articular femoral condyle fractures in the coronal plane. These are very uncommon injuries. The purpose of this study was radiologic and functional outcome assessment of surgically managed Hoffa fractures with headless compression screws.&#x0D; METHODS&#x0D; We prospectively studied 11 patients with isolated Hoffa fractures who were treated with open reduction and internal fixation using two or more headless compression screws. Antiglide plate was used only in one case. We used the midline parapatellar approach for all cases. All patients had gone through aggressive physiotherapy after the operation. All patients were evaluated radiologically and functionally on a regular interval. The functional outcome was recorded in terms of Lysholm score, Knee society score (KSS), Range of motion (ROM) and VAS score.&#x0D; RESULTS&#x0D; All fractures united radiologically with an average time of 3.3 months with no evidence of subsequent fixation failure. The mean Lysholm score and KSS at final follow-up were 88.6±7.1 and 86±7.6 respectively. The mean knee range of motion was from 0˚ to 120.5˚ ± 9.3˚. At the final follow-up, the mean VAS score dropped significantly to 0.63±0.8.&#x0D; CONCLUSIONS&#x0D; Operative management of Hoffa fractures with at least two headless compression screws can yield satisfactory functional and radiologic outcomes. Stable fixation and timely physiotherapy are the keys to success.

The Use of Headless Screws in the Setting of an Acute Posterior Calcaneal Avulsion Fracture in the Pediatric Population: A Case Report

Background: Sever’s is the most common cause of heel pain in the pediatric population and increases the risk of calcaneal apophyseal avulsion fractures. This is an uncommon fracture that faces problems with tenuous soft tissue coverage and high shear forces at the fracture site. Multiple fixation techniques have been employed in addressing this injury, with no one method standing out as superior. Case Presentation: We present a case of a 13-year-old male with a calcaneal apophyseal avulsion fracture in which cannulated headless compression screws were used for fixation. This was found to provide adequate compression across the fracture with minimal hardware prominence. This also allowed for the injection of radiopaque solution through the cannulated screw to rule out subtalar intraarticular penetration. We believe this represents a novel method of addressing these injuries. Conclusion: Cannulated headless compression screws are a suitable fixation technique for pediatric apophyseal avulsion fractures that provide the added benefit of assessment of intra-articular penetration of the subtalar joint by the injection of radiopaque solution through the cannulated screw.

Radiological Outcomes of the Simplified Sauvé-Kapandji Procedure for Osteoarthritis of the Distal Radioulnar Joint.

Background: We have been using a simplified Sauvé-Kapandji (SK) procedure using a headless compression screw for the treatment of osteoarthritis (OA) of the distal radio-ulnar joint (DRUJ). Unlike a standard SK procedure, the simplified SK procedure does not require exposure of the DRUJ to prepare the opposing surfaces of the sigmoid fossa and the ulnar head or any procedures to stabilise the proximal stump of the ulna. The aim of this study is to report the radiological outcomes of the simplified SK procedure. Methods: We retrospectively reviewed data of all patients who underwent a simplified SK procedure for osteoarthritis of the DRUJ at our hospital between October 2008 and September 2020 with a follow-up of at least 25 weeks. Baseline demographic and clinical characteristics were investigated. We also measured radiographic parameters and performed statistical analyses to evaluate the shelf-forming region, ulnar stump and deviation of the carpal region. Results: Our study included 10 patients with a mean follow-up of 52.3 weeks. There was no instance of complications such as nonunion of DRUJ arthrodesis, callus formation at ulnar pseudoarthrosis and painful instability at the proximal stump of the ulna. According to the Wilcoxon signed rank test, no radiographic parameters significantly changed during the follow-up period. There was a significant negative correlation between radioulnar width and the variation of ulnar translation index. Conclusions: All radiographic parameters were well maintained, at least during the short follow-up period. There was no instance of nonunion of DRUJ arthrodesis. The simplified SK with simple headless compression screw insertion may be a reliable method for treating OA of the DRUJ. Level of Evidence: Level IV (Therapeutic).

Distal interphalangeal joint arthrodesis with nonaxial multiple small screws: a biomechanical analysis with axial headless compression screw and clinical result of 15 consecutive cases

BackgroundThe axial headless compression screw (AHCS) technique is a widely used method for distal interphalangeal joint (DIPJ) and thumb IPJ arthrodesis. However, it might not be suitable for cases over 10° flexion of fusion angle and extremely small-sized phalanx. Here, the authors describe the nonaxial multiple small screws (NMSS) technique, compare the mechanical strength of the NMSS technique with the AHCS technique, and suggest clinical outcomes of the NMSS technique.MethodsDIPJ and thumb IPJ arthrodesis models were simulated in the 4th generation composite bone hand. Fixation with three 1.5 mm cortical screws (NMSS) or one HCS (AHCS) was performed in each pair of the phalanx. The bending stiffness and load to failure were tested in 10 pairs of each specimen, and the torsional stiffness and torque to failure were tested in seven pairs of each specimen. Moreover, 15 consecutive clinical DIPJ and thumb IPJ arthrodesis cases were reviewed retrospectively.ResultsThe NMSS specimens showed significantly higher bending load to failure, torsional stiffness, and torque to failure than the AHCS specimens. All 15 arthrodesis cases were united without severe complications. The mean fusion angle was 16.3° for the nine cases of the flexed target position.ConclusionsThe NMSS technique showed biomechanical stability comparable to that of the AHCS technique in DIPJ and thumb IPJ arthrodesis. Thus, the NMSS technique could be used as a feasible option in DIPJ and thumb IPJ arthrodesis, especially when a small finger is indicated and a significant flexion angle is required.

Two-level fixation with headless compression screws for tibial plateau fractures

PurposeReduction and fixation of tibial plateau fractures associated with small, “floating” intra-articular fragments proposes a challenge. We use fully threaded headless compression screws for (interfragmentary) fixation of such fragments before final plate fixation when standard fixation of intra-articular fragments with k-wires or lag screws is deemed insufficient. Our aim is to describe our technique and clinical experience of this two-level fixation.MethodsBetween 2006 and 2021, 29 patients with a comminuted tibial plateau fracture were treated with this two-level fixation in this retrospective case series. Clinical baseline and surgical variables were collected for all patients. Clinical outcome variables were available for 28 patients with a median follow-up of 16.5 months (IQR 5–24). Functional outcomes were measured with the Knee Injury and Osteoarthritis Outcome Score (KOOS) and reported by 22 patients at a median of 5.2 years (IQR 3.5–9.8).ResultsReduction was anatomic or good in 82% of cases, fair in 14%, and a malreduction in 4%. Arthrosis was graded as grade 0 in 25% of cases, 1 in 39%, 2 in 21%, and 3 in 14%. Flexion was 110 degrees (IQR 100–130). Five patients had an extension deficit of 5 to 10 degrees. Median KOOS for symptoms and stiffness was 69 points (IQR 45–78), for pain 71 (IQR 45–88), for ADL 85 (IQR 52–95), for sports 30 (IQR 11–55), and for quality of life 34 (IQR 19–56).ConclusionThe use of fully threaded headless compression screws is a simple and helpful addition in the treatment of comminuted tibial plateau fractures.

Prospective Comparison of the Early Outcomes of Headless Compression Screw and Percutaneous K-Wire Fixation in Metacarpal Fractures

The study aimed to assess early clinical outcomes achieved by headless compression screws (HCS) in fixation of metacarpal fractures, and to compare them with outcomes of percutaneous K-wire fixation. The hypothesis was that HCS would show better arc of motion and superior early clinical outcomes. This was a randomized study of nonthumb metacarpal neck and shaft fractures. To compare the 2 surgical techniques, 23 patients treated for metacarpal neck and shaft fractures were divided into 2 groups: 11 treated with K-wire fixation and the other 12 with HCS fixation. We followed the patients for 12 weeks. The primary objective was to compare metacarpophalangeal arc of motion, and the secondary aim was to determine clinical union, radiographic union, and recovery time before returning to employment in the 2 groups. At each follow-up visit, patients in the group treated with HCS had better metacarpophalangeal arc of motion than those treated with K-wire fixation. The HCS group showed a shorter time interval to return to work (at 3 weeks) and no complications, while the K-wire group had 1 pin track infection, which was treated with oral antibiotics and pin removal. Compared with K-wire fixation, limited-open HCS fixation for metacarpal neck and shaft fractures was superior in terms of the early postoperative metacarpophalangeal arc of motion and return to work. Therapeutic II.

Olecranon With Concomitant Radial Head Fracture: A Case Series of Fifteen Patients.

IntroductionSimultaneous olecranon and radial head fractures are rare injuries and due to this factor, the outcome of the selected therapy is not widely studied. The aim of this study is to report and evaluate the functional outcome of the surgical treatment of simultaneous olecranon and radial head fractures.Materials and MethodsThis is a retrospective study of fifteen patients with concomitant olecranon and radial head fractures presenting to our orthopedic department between 2015 and 2020. Olecranon fractures were classified by Mayo classification and radial head fractures by Mason classification and were managed appropriately. Main outcome measures include range of elbow extension-flexion, pronation-supination, Broberg and Morrey rating system score, and quickDASH score.ResultsOur study included 6 females and 9 males with a mean age of 50 (r, 25–73). The mean of follow-up was 31 months (r, 3–51). Olecranon fractures were fixed with tension band with K-Wires or intramedullary compression screw or locking plate. Radial head fractures were fixed with headless compression screws or mini plate or replaced (radial head arthroplasty). Postoperatively, an average 115° extension-flexion arc and 135° pronation-supination arc was noted. The mean Broberg and Morrey rating system score was 78 and the mean quick DASH score was 25, indicating a good result. Two cases of heterotopic ossification were present and no nonunion was noted.ConclusionSurgical management of concomitant olecranon and radial head fractures with appropriate technique can result in the restoration of a functional movement arc and a satisfactory outcome.

Optimal Screw Length for Osteochondritis Dissecans Fixation of the Pediatric Distal Femur: A Magnetic Resonance Imaging Comparision Study of Pediatric Epiphyseal Thickness

Background:Magnetic Resonance Imaging (MRI) allows orthopaedic surgeons to assess Osteochondritis Dissecans (OCD) of the distal femur in children. When surgical fixation is indicated, headless compression screws can be used to stabilize the fragment and allow it to heal. During screw placement it is important to make sure the screw is not too long or it may cross the physis, leading to physeal growth arrest.Hypothesis/Purpose:The purpose of the study was to determine the optimal screw length for osteochondritis dissecans fixation of the pediatric distal femur. A secondary objective was to compare the thickness of the epiphysis of the pediatric distal femur at different locations and screw trajectories.Methods:This retrospective, IRB-approved, single-institution study identified 113 pediatric patients (ages 6-17 years old) with a knee MRI from January 1, 2008 to January 1, 2020. A total of 6 measurements were obtained on each pediatric MRI by two residents. The longitudinal axis of the femur was used as a reference trajectory. Three measurements were obtained from medial femoral condyle and lateral femoral condyle, respectively. The lengths measured were from the anteromedial (AM), posteromedial (PM), and distalmedial (DM) on the medial femoral condyle to the physis. On the lateral femoral condyle, the anterolateral (AL), posterolateral (PL), and distallateral (DL) were measured. 2 sample t-testing, chi-square analysis, and Pearson’s correlation coefficient were utilized to find significant associations. Results: Of the 113 pediatric knees identified, 32 did not meet inclusion criteria, yielding 81 patients for final analysis. The average epiphyseal thickness of the bone was 25.5 mm ± 4.2 (CI 24.5 – 26.4, range 14.1 – 33.1). There was a difference in epiphyseal thickness based on screw trajectory () with the average thickness being 23.0, 22.2, 30.5, 29.3, 25.5, and 22.3 mm for the AM, AL, PM, PL, DM and DL respectively. There was a negative correlation between increasing age and epiphyseal cartilage thickness (). There was a positive correlation between increasing age and bone only epiphyseal thickness ().Conclusion:Our study outlines important measurements that orthopedic surgeons must be aware of when operating on OCD lesions in pediatric patients. These results can aid in determining the appropriate screw length that can be implanted into the pediatric distal femur to avoid damaging the distal femur. Our study results show that the optimal screw length to use in pediatric OCD lesion is 18mm in order to avoid physeal disturbance in the majority of pediatric patients.Figure 1.Sagittal MRI of the lateral distal femur showing the projection used to measure the anterolateral (AL), posterolateral(PL), and distallateral (DL) distances to the physisFigure 2.Sagittal MRI of the medial distal femur showing the projection used to measure the anteromedial (AM), posteromedial (PM), and distalmedial (DM) distances to the physis