Head Penetration Rate Research Articles

INFLUENCE OF MANUFACTURING CHARACTERISTICS OF HIGHLY CROSS-LINKED POLYETHYLENE ON FEMORAL HEAD PENETRATION IN TOTAL HIP ARTHROPLASTY: A TEN- TO 20-YEAR FOLLOW-UP STUDY

Highly cross-linked polyethylene (HXLPE) has decreased wear and revision rates in total hip replacement (THR) at a long-term. However, the effect of HXLPE manufacturing characteristics on femoral head penetration has not been clearly defined yet. We report this single-institution study to investigate the clinical and radiological results of different HXLPE liners in THR.In this retrospective cohort analysis of our prospective database, we identified 904 THRs performed between 2000 and 2013. Seven different HXLPE liner types were assessed: remelted (3), annealed (2), sequentially annealed (1) and vitamin E-infused (1). The linear femoral head penetration rate was measured at six weeks, one year, and annually thereafter, using the Roman Software v1.70 package.Thirty hips were revised for the following reasons: aseptic loosening (11), dislocation (12), periprosthetic femoral fracture (6), and infection (1). No hip was revised for wear or osteolysis. 741 THRs were evaluated for a mean follow-up of 15 years (range, 10 to 20). The mean total penetration 15 years after THR was 0.17 mm in the sequentially annealed, and 0.16 mm in the vitamin E-infused groups, whereas it was 0.26 mm in the melted 95 kGy, 0.27 mm in the melted 5 Mrad and 0.25 mm in the melted 100 kGy groups (p=0.001). From one to 15 years after surgery, the mean wear was 0.206 mm in cups with an acetabular inclination greater than 50º and 0.105 mm in those placed between 35º and 50º (p<0.001).Although HXLPE characteristics can result in a different wear performance in patients undergoing THR at a mean follow-up of 15 years, the clinical results are excellent. The position of the acetabular component can influence on the femoral head penetration of modern HXLPEs. Nevertheless, these patients should continue to be monitored to detect future problems.

Femoral Head Penetration Rates and Oxidation of Highly Cross-Linked Polyethylene Hip Liners Implanted More Than 10 Years

BackgroundHighly cross-linked polyethylene (HXLPE) was introduced to improve wear in total hip arthroplasty, with manufacturers implementing different thermal treatments to reduce oxidation. It is important to understand how long-term time in vivo affects the wear of these materials. The purpose of this study was to investigate the wear and oxidative performance of first-generation HXLPE hip inserts implanted for greater than 10 years and compare annealed and remelted HXLPE formulations. MethodsThere were 49 total hip arthroplasty liners retrieved during routine revision surgery as part of an institutional review board–approved implant retrieval program. Penetration rates for the liners were calculated as the difference between the thickness of the unloaded and loaded regions divided by implantation time. Oxidation indices for the rim, locking mechanism, articulating surface, and backside regions were measured using Fourier-transform infrared spectroscopy according to American Society for Testing and Materials 2102. Mann–Whitney U tests were used to determine the statistical difference between annealed and remelted components. ResultsThe cohort had an average implantation time of 13.1 ± 2.6 years for annealed and 12.1 ± 1.7 years for remelted components. The components were revised most often for polyethylene wear, instability, and loosening. The penetration rate averaged 0.0177 ± 0.014 mm/year for annealed components and 0.015 ± 0.022 mm/year for remelted components. Penetration rates did not differ between the remelted and annealed cohorts (P = .28). Oxidation indices were found to be significantly higher in the annealed cohort for all regions of interest (P < .001). ConclusionsOxidation was found to be higher in the annealed HXLPE; however, this does not seem to be associated with greater wear as we found the average penetration rates for the cohorts were low, and the penetration rates were similar between the annealed and remelted cohorts.

New polyethylenes in total hip arthroplasty : a 20- to 22-year follow-up study.

A significant reduction in wear at five and ten years was previously reported when comparing Durasul highly cross-linked polyethylene with nitrogen-sterilized Sulene polyethylene in total hip arthroplasty (THA). We investigated whether the improvement observed at the earlier follow-up continued, resulting in decreased osteolysis and revision surgery rates over the second decade. Between January 1999 and December 2001, 90 patients underwent surgery using the same acetabular and femoral components with a 28 mm metallic femoral head and either a Durasul or Sulene liner. A total of 66 hips of this prospective randomized study were available for a minimum follow-up of 20 years. The linear femoral head penetration rate was measured at six weeks, one year, and annually thereafter, using the Dorr method on digitized radiographs with a software package. In the Durasul group, no patients underwent revision due to loosening or showed radiological evidence of osteolysis. In the Sulene group, four patients (four hips) were revised due to femoral component loosening. The 20-year cumulative failure incidence in the presence of the competing event of death for revision surgery was 4.5% (95% confidence interval (CI) 0.8 to 13.6) in the Durasul group, and 8.9% (95% CI 2.8 to 19.5) in the Sulene group. The mean wear one year after surgery was 0.09 mm (SD 0.007) in the Durasul group and 0.24 (SD 0.015) in the Sulene group (p < 0.001). From one to 20 years after surgery, the mean total penetration was 0.32 mm (SD 0.045) in the Durasul group and 1.07 mm (SD 0.13) in the Sulene group (p < 0.001). Mean femoral head penetration at 20 years was approximately 70.0% less in the Durasul group than the Sulene group. The significant reduction in femoral head penetration obtained with the Durasul compared with Sulene in uncemented THA resulted in lower osteolysis and revision rates after 20 years.Cite this article: Bone Joint J2022;104-B(9):1032-1038.

A Ten-Year Radiostereometric Analysis of Polyethylene Wear Between Oxidized Zirconium and Cobalt Chrome Articulations in Total Hip Arthroplasty.

Oxidized zirconium (OxZi) femoral heads combine the decreased abrasive properties of ceramics with the toughness of metal alloys to lower wear and increase the durability of total hip arthroplasty. The purpose of this study was to compare the 10-year polyethylene wear rates between OxZi/XLPE and cobalt chrome (CoCr)/XLPE articulations. A radiostereometric analysis (RSA) was performed on two cohorts of 23 patients who underwent total hip arthroplasty using either OxZi/XLPE or CoCr/XLPE at a minimum of 10-year follow-up. Cohorts were matched for age, gender, body mass index (BMI), and diagnosis. Polyethylene wear was measured using RSA to determine total and steady-state wear rates for both cohorts. Preoperative and postoperative patient-reported outcome measures (SF12, HHS, and Western Ontario and McMaster Universities Arthritis Index scores) were compared. The mean total head penetration rate was found to be statistically different between the entire cohorts (OxZi 0.048±0.021 mm/y, CoCr 0.035±0.017 mm/y, P= .02) but not when 28-mm heads only (OxZi 0.045±0.016 mm/y, CoCr 0.034±0.017 mm/y, P= .066) were directly compared. The mean steady-state wear rate was not significantly different between the entire cohorts (OxZi 0.031±0.021 mm/y, CoCr 0.024±0.019 mm/y, P= .24) or 28-mm head cohorts (OxZi 0.028±0.019 mm/y, CoCr 0.024±0.019 mm/y, P= .574). Outcome measures showed no statistical difference except for the Harris Hip Score where the OxZi cohort demonstrated higher median scores. Using RSA to evaluate the 10-year in-vivo head penetration, there was no statistically significant difference in steady-state wear rates between OxZi and CoCr articulations. Both bearing combinations demonstrated wear rates well below the threshold for osteolysis.

Thirteen-year results of cementless total hip arthroplasty with zirconia heads on highly cross-linked polyethylene

Objectives Zirconia ceramic was introduced for femoral heads because of its mechanical strength and fracture toughness. Highly cross-linked polyethylene has been shown to achieve wear reduction compared to conventional polyethylene. The purpose of this study was to investigate the long-term results of cementless total hip arthroplasty with zirconia femoral heads on highly cross-linked polyethylene. Methods Radiographic measurements of two-dimensional femoral head penetration into the polyethylene were performed with a computerized method (PolyWare) in 93 hips at a mean follow-up of 13 years. The steady-state wear rates were measured based on the radiographs from the first year after surgery to the final follow-up. Results The mean Merle d’Aubigné and Postel score had improved significantly from 10.9 points preoperatively to 15.3 postoperatively (p < 0.001). Osteolysis was not found around the implant, and no zirconia heads had fractures. The total head penetration rate was 0.04 mm/year, and the steady-state wear rate was 0.02 mm/year. Kaplan–Meier survivorship with the endpoint of revision was 97% (95% confidence interval [CI], 92% to 99%) at 10 years. Conclusion Zirconia on highly cross-linked polyethylene demonstrated extremely low wear properties at long-term follow-up.

Minimum 10-Year Follow-Up of Cementless Total Hip Arthroplasty With a 32-mm Cobalt-Chromium Head on Highly Cross-Linked Polyethylene and a Tapered, Fiber Metal Proximally Coated Femoral Stem

BackgroundThe clinical and radiographic results of cementless total hip arthroplasty using a 32-mm cobalt-chromium head on remelted highly cross-linked polyethylene (HXLPE) and a tapered, fiber metal proximally coated femoral stem were evaluated at a mean follow-up of 12 years. MethodsA total of 57 cementless total hip arthroplasties using remelted HXLPE combined with a 32-mm cobalt-chromium head, and a tapered, fiber metal proximally coated femoral stem were performed from October 2004 to December 2006. Clinical evaluation was performed using the Merle d’Aubigné and Postel scoring system. Standardized anteroposterior and lateral radiographs of the pelvis and femur without weight-bearing were analyzed. Radiographic measurements of two-dimensional femoral head penetration into the polyethylene were performed with a computerized method. The steady-state wear rates were measured based on the radiographs from the first year after surgery to the final follow-up. ResultsThe mean Merle d’Aubigné and Postel score improved significantly from 10.7 points preoperatively to 15.6 postoperatively (P < .001). No osteolysis was found around the implant. Stem fixation in all cases showed stable bone ingrowth. Third-degree stress shielding was found in 46% of all stems. The total head penetration rate was 0.05 mm/y, and the steady-state wear rate was 0.01 mm/y. The Kaplan–Meier survivorship with the end point of revision was 95% (95% confidence interval, 85%-98%) at 12 years. ConclusionA 32-mm cobalt-chromium head on remelted HXLPE demonstrated low wear properties, and a tapered, fiber metal proximally coated femoral stem showed good results at long-term follow-up.

A vitamin E blended highly cross-linked polyethylene acetabular cup results in less wear: 6-year results of a randomized controlled trial in 199 patients

Background and purpose — Survivorship of total hip arthroplasty (THA) with the ultra-high molecular weight polyethylene (UHMWPE) monoblock cup has been limited due to periprosthetic osteolysis and aseptic loosening, secondary to wear of the UHMWPE. In response, a vitamin E blended highly cross-linked polyethylene (HXLPE) cup was developed. This study set out to compare the wear and clinical 6-year outcomes of vitamin E blended HXLPE with UHMWPE in an isoelastic monoblock cup in patients with hip osteoarthritis who underwent uncemented THA. The 2-year results have been reported previously. Patients and methods — For this randomized controlled trial 199 patients were included. 102 patients received the vitamin E blended HXLPE uncemented acetabular cup and 97 patients the uncemented UHMWPE monoblock cup. Clinical and radiographic parameters were obtained preoperatively, directly postoperatively, and at 3, 12, 24, and 72 months. Wear rates were compared using the femoral head penetration (FHP) rate. Results — 173 patients (87%) completed the 6-year follow-up. The mean NRS scores for rest pain, load pain, and patient satisfaction were 0.3 (SD 1), 0.6 (SD 1), and 8.6 (SD 1) respectively. The mean Harris Hip Score was 93 (SD 12). The FHP rate was lower in the vitamin E blended HXLPE cup (0.028 mm/year) compared with the UHMWPE cup (0.035 mm/year) (p = 0.002). No adverse reactions associated with the clinical application of vitamin E blended HXLPE were observed. 15 complications occurred, equally distributed between the two cups. The 6-year survival to revision rate was 98% for both cups. There was no aseptic loosening. Interpretation — This study shows the superior performance of the HXLPE blended with vitamin E acetabular cup with clinical and radiographic results similar to the UHMWPE acetabular cup.

2-year results of an RCT of 2 uncemented isoelastic monoblock acetabular components: lower wear rate with vitamin E blended highly cross-linked polyethylene compared to ultra-high molecular weight polyethylene

Background and purpose — The long-term survival of arthroplasty components may be limited by polyethylene wear-related problems such as periprosthetic osteolysis and aseptic loosening. Highly cross-linked polyethylene (HXLPE) blended with vitamin E was introduced to improve oxidative stability and to avoid long-term embrittlement. This study clinically compares the tribological behavior and clinical outcome of vitamin E blended HXLPE with ultra-high molecular weight polyethylene (UHMWPE) in an isoelastic monoblock cup for uncemented total hip arthroplasty.Patients and methods — In this randomized controlled trial (RCT), 199 patients were included: 102 patients received the vitamin E blended HXLPE cup, 97 patients the UHMWPE cup. Clinical and radiographic parameters were obtained preoperatively, directly postoperative and at 3, 12, and 24 months. Wear rates were compared using the mean linear femoral head penetration (FHP) rate.Results — 188 patients (94%) completed the 2-year follow-up. Mean patient satisfaction was higher in the vitamin E blended HXLPE group (8.9 [1]) than in in the control group (8.5 [2], p = 0.03). The Harris Hip Score (HHS) was higher in the vitamin E blended HXLPE group (95 [8]) than in the control group (92 [11], p = 0.3). The FHP rate was lower in the vitamin E blended HXLPE group: 0.046 mm/year compared with 0.056 mm/year in the control group (p = 0.05). No adverse reactions associated with the clinical application of vitamin E blended HXLPE were observed during follow-up, with an excellent 2-year survival to revision rate of 98% for both cups.Interpretation — This study shows the superior performance of the HXLPE blended with vitamin E acetabular cup with lower linear femoral head penetration rates and better clinical results compared with the UHMWPE acetabular cup after 2 years.

Cross-Linked Versus Conventional Polyethylene for Long-Term Clinical Outcomes After Total Hip Arthroplasty: A Systematic Review and Meta-Analysis

Background: Cross-linked polyethylene (HXLPE) liners have been used for total hip arthroplasty (THA) to address the problem of osteolysis and revision surgery associated with conventional polyethylene (CPE) liners. This systematic review and meta-analysis investigated the long-term efficacy of HXLPE in preventing revision surgery and radiological osteolysis in comparison to CPE. Materials and Methods: A comprehensive search of PubMed, Embase, and the Cochrane Library from their respective inception to September 2018 was conducted to identify potential candidate articles. Data were pooled using Stata software 14.0. The quality of randomized controlled trials (RCTs) and observational studies was assessed by two different authors using the Cochrane risk-of-bias tool and the Newcastle–Ottawa scale (NOS), respectively. Results: Eight RCTs and six observational studies were included in this review. The pooled results significantly favored HXLPE over CPE in terms of total number of revisions and radiological osteolysis, with a risk reduction of 78% (95% confidence interval [CI] 0.13–0.36; p < 0.001) and 80% (95% CI 0.13–0.29; p < 0.001), respectively. Additionally, subgroup analyses of pooled data from RCTs and observational studies both showed the efficacy of HXLPE in the prevention of revision and osteolysis. Polyethylene wear in the HXLPE group was significantly less than that in the CPE group in terms of linear wear rates and head penetration rates (both p < 0.001). No significant differences were observed with regard to functional outcomes. Conclusions: The current evidence shows that HXLPE significantly improved the clinical and radiographic outcomes, but not the functional outcomes, in comparison to CPE in long-term follow-up.

The Survivorship of the Uncemented Iso-Elastic Monoblock Acetabular Component at a Mean of 6-Year Follow-up.

Aseptic loosening, caused by wear and osteolysis, is the most frequent reason for hip replacement revision in the UK. To prevent aseptic loosening, an acetabular component with vitamin E added to irradiated highly cross-linked polyethylene (HXLPE) was developed to reduce oxidative degradation. A prior study of the vitamin E-blended HXLPE acetabular component after 2years of follow-up reported no adverse reactions or abnormal mechanical behavior. To further examine this hypothesis of reducing wear and osteolysis, we sought to evaluate outcomes after 6-year follow-up. A cohort of 95 of the 112 initial patients (84.2%) completed the 6years of follow-up after receiving a vitamin E-blended HXLPE acetabular component. Evaluation was performed in terms of clinical (visual analog scale [VAS] score, VAS score with weight-bearing, VAS score for satisfaction, and Harris Hip Score) and radiological (inclination, polar gap, radiolucencies, migration, and 2-D linear femoral head penetration rate) assessment. The mean VAS score for patient satisfaction was 8.75 and the mean Harris Hip Score was 91.8. There were two revisions because of deep infections and one because of a peri-prosthetic femoral fracture. Two acetabular components migrated initially; however, delayed acetabular stabilization occurred. Both patients had good clinical scores at 72months. The mean femoral head penetration rate was 0.036mm/year. This prospective cohort study has shown no adverse reactions concerning the vitamin E additive, promising wear rates, no signs of osteolysis, a 100% survival rate for aseptic loosening, and an all-cause survivorship percentage of 97.4% at 6years of follow-up.

Femoral Head Penetration Rates of Second-Generation Sequentially Annealed Highly Cross-Linked Polyethylene at Minimum Five Years

BackgroundHighly cross-linked polyethylene (HXLPE) liners in total hip arthroplasty (THA) have demonstrated decreased wear rates, resilience to cup orientation, and reduced osteolysis compared to conventional polyethylene. Sequential irradiation and annealing below the melting temperature is unique compared to most HXLPE which is irradiated and remelted. This study purpose is to provide minimum 5-year femoral head penetration rates of sequentially annealed HXLPE in primary THA. MethodsA retrospective review of a prospectively collected database identified 198 consecutive, cementless primary THAs utilizing sequentially annealed HXLPE (X3; Stryker, Mahwah, NJ). Operative technique was standardized. Radiographs were analyzed utilizing the Martell method with minimum 5-year and 1-year radiographs as baseline to minimize the initial bedding-in period. ResultsSeventy-seven hips with minimum 5-year follow-up were analyzed. Mean steady state linear and volumetric head penetration rates were 0.095 mm/y and 76 mm3/y, respectively. Volumetric head penetration was significantly less for 32-mm compared to 36-mm (P = .028). In addition, less head penetration was observed for ceramic 32-mm heads at nearly half the rate compared to cobalt-chromium 36-mm heads (P ≥ .092). No correlations existed between penetration rates and age, body mass index, University of California Los Angeles Activity Level, polyethylene thickness, cup inclination, or anteversion (P ≥ .10). No radiographic osteolysis was observed. ConclusionSurprisingly, linear head penetration rates of sequentially annealed HXLPE were nearly identical to the osteolysis threshold for conventional polyethylene and greater than reports of irradiated and remelted HXLPE. Furthermore, these data corroborate reports that HXLPE is resilient to cup orientation and demographic variables. Longer term follow-up is recommended.

Contemporary Dual Mobility Head Penetration at Five Years: Concern for the Additional Convex Bearing Surface?

BackgroundDual mobility (DM) bearings are increasingly popular and second-generation designs contain highly cross-linked polyethylene. The purpose of this study is to report head penetration rates in modern DM bearings. MethodsA review of 63 consecutive DM bearings was performed. Radiographs were analyzed for head penetration using Martell methodology at regular postoperative intervals. ResultsThirty-four DM bearings were analyzed. Mean linear head penetration was 1.59 mm/y at 1 year, 1.07 mm/y at 2 years, and 0.27 mm/y at 5 years following an exponential regression model (R2 = 0.999). Mean volumetric wear was 783 mm3/y at 1 year, 555 mm3/y at 2 years, and 104 mm3/y at 5 years following an exponential regression model (R2 = 0.986). ConclusionInitial head penetration of DM bearings is larger than contemporary cross-linked polyethylene bearings; however, rates approach steady state after 2 years, analogous to traditional bearings. The larger “bedding-in” head penetration may be due to the additional convex bearing surface, creating 2 surfaces for deformation/wear.

An Uncemented Iso-Elastic Monoblock Acetabular Component: Preliminary Results

Little is known about the clinical application of highly cross-linked polyethylene (HXLPE) blended with vitamin E. This study evaluates an uncemented iso-elastic monoblock cup with vitamin E blended HXLPE. 112 patients were followed up for 2years. 95.5% completed the follow-up. The mean VAS score for patient satisfaction was 8.8 and the mean Harris Hip Score was 94.2. In 7 cases initial gaps behind the cup were observed, which disappeared completely during follow-up in 6 cases. The mean femoral head penetration rate was 0.055mm/year. No adverse reactions or abnormal mechanical behavior was observed with the short term use of vitamin E blended HXLPE. This study shows the promising performance of this cup and confirms the potential of vitamin E blended HXLPE.

Clinical and radiographic outcomes of total hip replacement with poly(2-methacryloyloxyethyl phosphorylcholine)-grafted highly cross-linked polyethylene liners: Three-year results of a prospective consecutive series

Objectives. This study aimed to evaluate the clinical safety and wear-resistance of the novel highly cross-linked polyethylene (HXLPE) acetabular liner with surface grafting of poly(2-methacryloyloxyethyl phosphorylcholine) (PMPC) at 3 years after total hip replacement (THR).Methods. Eighty consecutive patients underwent cementless THR using a 26-mm diameter cobalt–chromium–molybdenum alloy femoral head and a PMPC-grafted HXLPE liner for the bearing couplings. We evaluated the clinical and radiographic outcomes of 76 patients at 3 years after the index surgery.Results. The clinical results at 3 years were equivalent to a Harris hip score of 95.6 points. No adverse events were associated with the implanted PMPC-grafted HXLPE liner, and no periprosthetic osteolysis was detected. The mean femoral head penetration rate was 0.002 mm/year, representing marked reduction compared with other HXLPE liners.Conclusions. A PMPC-grafted HXLPE liner is a safe option in THR and probably reduces the generation of wear particles.

Total Hip Arthroplasty Using Highly Cross-Linked Polyethylene in Patients Younger Than 50 Years With Minimum 10-Year Follow-Up

The purpose of this study was to investigate the relatively long-term outcomes in 50 patients (54 hips) younger than 50years of age who underwent total hip arthroplasty using highly cross-linked polyethylene (HXLPE) liners. With a minimum follow-up of 10years, mean age at time of surgery was 38.9years (range, 15–50years). Survivorship was 100%. There was no radiographic evidence of osteolysis or component loosening. Mean steady-state femoral head penetration rate was 0.020±0.0047mm/yr. Clinical outcomes were excellent, with mean Harris hip score of 91.2 (range, 72–99) points at final follow-up.

The 2012 John Charnley Award: Clinical Multicenter Studies of the Wear Performance of Highly Crosslinked Remelted Polyethylene in THA

Highly crosslinked polyethylene (HXLPE) in THA was developed to reduce particle-induced periprosthetic osteolysis. A series of clinical studies were initiated to determine the clinical efficacy as judged by patient-reported scores, radiographic osteolysis, and wear analysis of one form of HXLPE. The purposes of this series of studies were to (1) determine the wear rates of one form of HXLPE; (2) report long-term (7-10years) patient-reported outcome measures; (3) assess the effect of femoral head size on wear; and (4) determine the incidence of periprosthetic osteolysis. A single-center and two multicenter studies were conducted on 768 primary patients (head size 26-36mm) undergoing THA at eight medical centers. Patient-reported outcome scores, radiographic grading for osteolysis, and radiographic wear evaluation were performed. Serial plain radiographs showed no periprosthetic osteolysis in the three studies. The average femoral head penetration rates did not correlate with time in vivo for patients with standard femoral head sizes. Although there was an indication of higher wear in patients with 36-mm diameter femoral heads, it was below the threshold for producing osteolysis. The introduction of this HXLPE substantially improved the prognosis of patients after THA up to 13years as judged by clinical scores, incidence of osteolysis, and polyethylene wear measurements. Level III, therapeutic study. See the Guideline for Authors for a complete description of levels of evidence.

Femoral Head Size of 36 mm against Highly Cross-linked Polyethylene in Patients Younger than 60 Years: Minimun Three Years of Follow Up

Purpose: The purpose of this study was to evaluate the early results of total hip arthroplasty (THA) performed using large diameter femoral head against with highly cross-linked polyethylene as a bearing surface in patients less than sixty years of age. Materials and Methods: Seventy patients were enrolled and retrospectively reviewed. The mean age of patients at index surgery was 49 years and the mean follow-up period was 61 months. Clinical follow-up involved implementing the Harris hip score (HHS) and a radiographic evaluation that included linear radiolucency, osteolysis, and loosening. An annual wear rate was performed at 6 weeks; at 3, 6, and 12 months; and on a yearly basis thereafter. Results: The average HHS at last follow-up was 94 (range: 82-98). Radiographically, no osteolysis in the pelvis or proximal femur was observed in any patient. No acetabular cup or femoral stem failed due to aseptic loosening. No eccentric wear was observed on any liner, and no liner fracture occurred. However, one patient experienced hip dislocation. The average femoral head penetration rate during the fi postoperative year was 0.077±0.026 mm/year, and the average steady-state wear rate was 0.033±0.023 mm/year. Conclusion: THA with a large diameter femoral head of highly cross-linked polyethylene in patients younger than 60 years of age was found to produce results comparable to previous in vitro laboratory hip simulation studies. In particular, patient satisfaction was high due to no limitation in range of motion or hip posture during the early post-operative period. Longer-term follow-up is required to demonstrate the clinical benefi ts of this new material more comprehensively.

Second-generation Annealed Highly Cross-linked Polyethylene Exhibits Low Wear

Compared with conventional polyethylene, first-generation highly cross-linked polyethylenes have low wear, but controversy exists regarding their reduced mechanical strength and/or retained free radicals. Second-generation highly cross-linked polyethylenes have been developed to reduce wear, maintain mechanical strength, and have oxidative resistance, but it is unclear whether they do so. The primary objective of this study therefore was to determine if a second-generation annealed material has low linear wear at 5years followup. Secondary objectives were to evaluate for overall survivorship, implant fixation, osteolysis, and effect of socket inclination on wear. In a multicenter prospective study, we radiographically evaluated 155 patients (167 hips) at 3years, 124 patients (132 hips) at 4years, and 46 patients (51 hips) at 5years. The linear head penetration rate was measured at 6weeks, 1year, and yearly through 5years. The head penetration per year after the first year of bedding-in was 0.024mm per year at 3years, 0.020mm per year at 4years, and 0.008mm per year at 5years. The average wear rate over 5years was 0.015mm per year and represents a 58% improvement over a first-generation annealed highly cross-linked polyethylene. The Kaplan-Meier survivorship (revision for any reason) was 97.8%. We revised no hip for bearing surface failure and observed no osteolysis. Socket inclination did not affect linear wear. These data suggest the linear wear rate for a second-generation annealed highly cross-linked polyethylene is no greater than that for historic controls of first-generation highly cross-linked polyethylenes, and no untoward complications were encountered with this new material. Level II, prognostic study. See the Guidelines for Authors for a complete description of levels of evidence.

The Effect of Poly Sterilization on Wear, Osteolysis and Survivorship of a Press-fit Cup at 10-Year Followup

During the mid-1990s when our institution was using a press-fit porous-coated cup without supplemental initial fixation for primary THA, the manufacturer transitioned from gamma irradiation to gas plasma for the terminal sterilization of their polyethylene liners. At minimum 10-year followup, we asked whether the fixation achieved by solely relying on a press-fit would be durable and how different liner sterilization methods affected radiographic wear, osteolysis, and survivorship. We retrospectively reviewed 373 patients who underwent 398 primary THAs with a press-fit porous-coated cup between March 1995 and December 1996. Mean age at time of surgery was 61.5 ± 13.3 years and mean followup was 10.4 ± 3.7 years. We determined reasons for revision, survivorship, femoral head penetration, osteolysis, and wear-related complications. Among 20 revisions involving any component, seven were associated with wear and osteolysis. Kaplan-Meier survivorship, using component revision for any reason as an end point, was 95.7% (95% confidence interval, 93.6%-97.9%) at 10 years. Noncrosslinked liners sterilized with gas plasma demonstrated a mean head penetration rate of 0.20 ± 0.09 mm/year compared with 0.13 ± 0.07 mm/year for liners sterilized with gamma irradiation in air and 0.09 ± 0.04 mm/year for liners sterilized with gamma-irradiation with barrier packaging without oxygen. THAs with increased volumetric wear tended to demonstrate larger osteolytic lesions (r = 0.40) and there tended to be less osteolysis among the liners sterilized with gamma-irradiation with barrier packaging without oxygen. However, there was no difference in survivorship among the sterilization groups and there has been no cup or stem loosening associated with osteolysis. Durable biologic fixation through 10-year followup can be achieved by solely relying on an initial press-fit. Noncrosslinking gas plasma for terminal sterilization of the polyethylene liners was associated with greater head penetration rate than gamma irradiation. Level IV, therapeutic study. See Guidelines for Authors for a complete description of levels of evidence.

Eight-year wear analysis in Longevity highly cross-linked polyethylene liners comparing 26- and 32-mm heads

Although wear reduction of highly cross-linked polyethylene has been demonstrated to be independent of femoral head diameter in some simulation studies, the clinical effects of femoral head diameter on wear of highly cross-linked polyethylene sockets remain unclear. We compared the in vivo wear of Longevity highly cross-linked polyethylene liners at 8-year follow-up using 26- or 32-mm cobalt-chromium heads. A retrospective cohort study was performed on 90 cementless total hip arthroplasties (THAs) using Longevity highly cross-linked polyethylene liners combined with 26- (45 THAs) or 32-mm (45 THAs) cobalt-chromium heads. Annual radiographs were analyzed using PolyWare computer-assisted methods and linear and volumetric total head penetration rates and linear and volumetric steady-state wear rates were compared. The two groups showed similar background data, and no significant differences were identified between groups in total head penetration rate or steady-state wear rate. Steady-state wear rates were negligible. Osteolysis was not observed in any hips in either group. At the 8-year follow-up, wear of the Longevity was the same irrespective of the use 26- or 32-mm heads.