Human Health Hazards Research Articles

Plasmodium proteases and their role in development of Malaria vaccines.

Malaria remains a major health hazard for humans, despite the availability of efficacious antimalarial drugs and other interventions. Given that the disease is often deadly for children under 5 years and pregnant women living in malaria-endemic areas, an efficacious vaccine to prevent transmission and clinical disease would be ideal. Plasmodium, the causative agent of malaria, uses proteases and protease inhibitors to control and process to invade host, modulate host immunity, and for pathogenesis. Plasmodium parasites rely on these proteases for their development and survival, including feeding their metabolic needs and invasion of both mosquito and human tissues, and have thus been explored as potential targets for prophylaxis. In this chapter, we have discussed the potential of proteases like ROM4, SUB2, SERA4, SERA5, and others as vaccine candidates. We have also discussed the role of some protease inhibitors of plasmodium and mosquito origin. Inhibition of plasmodium proteases can interrupt the parasite development at many different stages therefore understanding their function is key to developing new drugs and malaria vaccines.

Risk-based prioritization of PFAS using phenotypic and transcriptomic data from human induced pluripotent stem cell-derived hepatocytes and cardiomyocytes.

Per- and polyfluoroalkyl substances (PFAS) are chemicals with important applications; they are persistent in the environment and may pose human health hazards. Regulatory agencies are con­sidering restrictions and bans of PFAS; however, little data exists for informed decisions. Several prioritization strategies were proposed for evaluation of potential hazards of PFAS. Structure-based grouping could expedite the selection of PFAS for testing; still, the hypothesis that structure-effect relationships exist for PFAS requires confirmation. We tested 26 structurally diverse PFAS from 8 groups using human induced pluripotent stem cell-derived hepatocytes and cardiomyocytes, and tested concentration-response effects on cell function and gene expression. Few phenotypic effects were observed in hepatocytes, but negative chronotropy was observed in cardiomyocytes for 8 PFAS. Substance- and cell type-dependent transcriptomic changes were more prominent but lacked substantial group-specific effects. In hepatocytes, we found upregulation of stress-related and extracellular matrix organization pathways, and down-regulation of fat metabolism. In car­diomyocytes, contractility-related pathways were most affected. We derived phenotypic and transcriptomic points of departure and compared them to predicted PFAS exposures. Conservative estimates for bioactivity and exposure were used to derive a bioactivity-to-exposure ratio (BER) for each PFAS; 23 of 26 PFAS had BER > 1. Overall, these data suggest that structure-based PFAS grouping may not be sufficient to predict their biological effects. Testing of individual PFAS may be needed for scientifically-supported decision-making. Our proposed strategy of using two human cell types and considering phenotypic and transcriptomic effects, combined with dose-response analysis and calculation of BER, may be used for PFAS prioritization.

Derivation of human health hazard assessment values for tetramethylammonium hydroxide (TMAH) under the Japan Chemical Substances Control Law

Derivation of human health hazard assessment values for tetramethylammonium hydroxide (TMAH) under the Japan Chemical Substances Control Law

Use of Probiotics for Safe Quail Meat Production

Safe meat production is an important aspect to avoid human health hazards. The use of probiotics in poultry is an important tool to produce safe meat among several established biotechnological approaches. In this experiment, we studied the effects of probiotics for producing safe Japanese quail meat. 150 Japanese quail chicks were reared for a period of six weeks using various doses of probiotics (0, 0.5, 1, 1.5, and 2g per litre of water). The chicks were randomly distributed into five treatment groups with three replications each. The number of birds in each replication was 10. After rearing six weeks, significantly high body weight was found at probiotic concentrations of 1, 1.5, and 2g per litre of water. The feed intake in various treatments did not differ significantly, but comparatively better feed conversion ratios were observed at probiotic treatments. Water quality was not significantly differed as a result of addition of probiotics to the water. The reason for this better growth performance is probably due to the multiple benefits of probiotics in poultry. Probiotics could have maintained gut health with better nutrient utilization and availability that might have been led to higher body weight gain in the quail. In future experiments, challenging the birds with diseases or comparing probiotics with antibiotic growth promoters is required to ensure the efficiency of probiotics.

Quantitative risk ranking of mycotoxins in milk under climate change scenarios

Mycotoxins are toxic fungal metabolites that may occur in crops. Mycotoxins may carry-over into bovine milk if bovines ingest mycotoxin-contaminated feed. Due to climate change, there may be a potential increase in the prevalence and concentration of mycotoxins in crops. However, the toxicity to humans and the carry-over rate of mycotoxins from feed to milk from bovines varies considerably. This research aimed to rank emerging and existing mycotoxins under different climate change scenarios based on their occurrence in milk and their toxicity to humans. The quantitative risk ranking took a probabilistic approach, using Monte-Carlo simulation to take account of input uncertainties and variabilities. Mycotoxins were ranked based on their hazard quotient, calculated using estimated daily intake and tolerable daily intake values. Four climate change scenarios were assessed, including an Irish baseline model in addition to best-case, worst-case, and most likely scenarios, corresponding to equivalent Intergovernmental Panel on Climate Change (IPCC) scenarios. This research prioritised aflatoxin B1, zearalenone, and T-2 and HT-2 toxin as potential human health hazards for adults and children compared to other mycotoxins under all scenarios. Relatively lower risks were found to be associated with mycophenolic acid, enniatins, and deoxynivalenol. Overall, the carry-over rate of mycotoxins, the milk consumption, and the concentration of mycotoxins in silage, maize, and wheat were found to be the most sensitive parameters (positively correlated) of this probabilistic model. Though climate change may impact mycotoxin prevalence and concentration in crops, the carry-over rate notably affects the final concentration of mycotoxin in milk to a greater extent. The results obtained in this study facilitate the identification of risk reduction measures to limit mycotoxin contamination of dairy products, considering potential climate change influences.

Enabling novel paradigms: a biological questions-based approach to human chemical hazard and drug safety assessment.

Throughput needs, costs of time and resources, and concerns about the use of animals in hazard and safety assessment studies are fueling a growing interest in adopting new approach methodologies for use in product development and risk assessment. However, current efforts to define "next-generation risk assessment" vary considerably across commercial and regulatory sectors, and an a priori definition of the biological scope of data needed to assess hazards is generally lacking. We propose that the absence of clearly defined questions that can be answered during hazard assessment is the primary barrier to the generation of a paradigm flexible enough to be used across varying product development and approval decision contexts. Herein, we propose a biological questions-based approach (BQBA) for hazard and safety assessment to facilitate fit-for-purpose method selection and more efficient evidence-based decision-making. The key pillars of this novel approach are bioavailability, bioactivity, adversity, and susceptibility. This BQBA is compared with current hazard approaches and is applied in scenarios of varying pathobiological understanding and/or regulatory testing requirements. To further define the paradigm and key questions that allow better prediction and characterization of human health hazard, a multidisciplinary collaboration among stakeholder groups should be initiated.

Risk surveillance with spatial distribution of Organochlorine Pesticides (OCPs) from sedimentary samples of Chenab River

A pioneering study employed a holistic geostatistical approach to predict the spatial variability of a non sampled area in the Chenab River, Pakistan, using kriging interpolation for organochlorine pesticide (OCP)-polluted risk zones. The Present research intended to investigate the carcinogenic and non-carcinogenic human health risks, contamination levels, and spatial variation of OCPs in the Chenab River, Pakistan. The residual OCP content in sediment samples (n = 120) ranged from 0.056 to 32.14 ng/g. DDE and α-HCH were prevalent among all the samples analyzed, with mean concentrations of 15.84 ± 8.02 and 12.45 ± 6.72 ng/g, respectively. The order of magnitude of OCPs in sediment samples was DDTs > α-HCH > chlorothalonil > heptachlor > endosulfan > aldrin > dieldrin. The findings of the single (SPI) and Nemerow (Nel) pollution index of α-HCH, heptachlor, and aldrin depicted the Chenab River as a serious pollution risk zone. The outcomes of the Pearson correlation coefficient analysis represent the positive correlation among all OCPs, revealing the common origin. Distribution trends showed substantially higher (p < 0.05) contents of analyzed OCPs along the downstream zone. With regards to USEPA human health hazard assessment model, the estimated non-carcinogenic (ΣHI) and non-carcinogenic (ΣTCR) risk ranged from 1.1 × 10−5 to 1.0 × 10−1, 4.0 × 10−8 to 3.2 × 10−4 respectively. TCR >10−4 illustrated a substantial cancer health risk posed by α-HCH, heptachlor, aldrin, and dieldrin in the downstream zone. We recommend the urgent cessation of the ongoing discharge of OCPs into the Chenab River, which needs to be highlighted owing to the significant cancer risk to public health to ensure the good health and wellbeings.

A Novel Aptamer Biosensor Based on a Localized Surface Plasmon Resonance Sensing Chip for High-Sensitivity and Rapid Enrofloxacin Detection.

Enrofloxacin, a fluoroquinolone widely used in animal husbandry, presents environmental and human health hazards due to its stability and incomplete hydrolysis leading to residue accumulation. To address this concern, a highly sensitive aptamer biosensor utilizing a localized surface plasmon resonance (LSPR) sensing chip and microfluidic technology was developed for rapid enrofloxacin residue detection. AuNPs were prepared by the seed method and the AuNPs-Apt complexes were immobilized on the chip by the sulfhydryl groups modified on the end of the aptamer. The properties and morphologies of the sensing chip and AuNPs-Apt complexes were characterized by Fourier transform infrared spectroscopy (FTIR), UV-Vis spectrophotometer, and scanning electron microscope (SEM), respectively. The sensing chip was able to detect enrofloxacin in the range of 0.01-100 ng/mL with good linearity, and the relationship between the response of the sensing chip and the concentration was Δλ (nm) = 1.288log ConENR (ng/mL) + 5.245 (R2 = 0.99), with the limit of detection being 0.001 ng/mL. The anti-interference, repeatability, and selectivity of this sensing chip were studied in detail. Compared with other sensors, this novel aptamer biosensor based on AuNPs-Apt complexes is expected to achieve simple, stable, and economical application in the field of enrofloxacin detection.

Origin, spatial distribution, sediment contamination, ecological and health risk evaluation of trace metals in sediments of ship breaking area of Bangladesh

Eleven trace metals (Cd, Cr, Fe, Mn, Cu, Ni, Co, Zn, As, Pb, and Ag) in sediments of Bangladesh’s ship breaking area were measured by an atomic absorption spectrometer to determine origin, contamination extent, spatial distributions, and associated ecological and human health hazards. This study found considerable quantities of Pb, Cd, Mn, Zn, and Cu when compared with standards and high levels of Pb, Cd, Zn, Cu, As, and Ag contamination according to pollution evaluation indices. Different indices indicate most of the sampling sites were highly polluted. However, spatial distribution maps indicate that trace metals were predominantly deposited in the northern and southern region. The ecological risk index revealed that Cd has the highest while Pb and As had moderate risk. Based on the health index values, Zn for both adults and children were higher than the safe limit while Mn, Pb, Cr, As, Fe, Cu, Ni, and Co for children were close to the threshold. The mean total carcinogenic risk values of Cr, As, and Ni for children and Ni for adults exceeded the permissible threshold. The cancer risk possibilities were further assessed using Monte Carlo simulation. Most trace metals have anthropogenic origins, which were attributed to ship breaking activities.

Elevated CO2 and Nanoparticles for the Management of Pulse Beetle, Callosobruchus chinensis L. in Stored Chickpea

Background: Pulse beetle, Callosobruchus chinensis L. is a primary pest of stored chickpea which causes 50-60 per cent loss in seed weight and 45.5-66.3 per cent loss in protein content of the seeds and injudicious and indiscriminate use of hazardous synthetic chemicals for preventing storage losses in chickpea may lead to human and animal health issues due to residual hazards. Therefore, the biorational management of the pulse beetle in stored chickpea has been undertaken keeping biology in mind will prevent the loss as well as protect human health hazard. Methodos: The experiments on various non-chemical biorational approaches like effect of elevated levels of CO2 and application of nano particles which control the test insect effectively but have less toxicity to non-target organisms and the environment were studied in the Department of Entomology, College of Agriculture, OUAT, Bhubaneswar, Odisha during 2018-2021. Result: The results showed that elevated levels of CO2 at 60 and 80 per cent for 150 and 30 minutes respectively resulted in cent per cent mortality of the bruchids. Among the nano particles, nano silica and nano zinc applied @1000 ppm and 750 ppm realized the highest mortality of the bruchids.

Assessing wineries' performance in managing critical control points for arsenic, lead, and cadmium contamination risk in the wine-making industry: A survey-based analysis utilizing performance indicators as a results tool

Human health hazards appear in wine production. Wineries have implemented food safety management systems to control food hazards through Hazard Analysis Critical Control Point (HACCP). Wine-making industry applies HACCP by evaluating Critical Control Points (CCPs). One of the CCPs that exhibits inadequate control is the potential contamination risk of arsenic, cadmium, and lead throughout the winemaking procedure. Wineries performance level about controlling CCPs related to contamination risk by arsenic, cadmium and lead in the winemaking were analyzed. A sixteen-question questionnaire was made to achieve this research. Three indicators were calculated for training, legislation, and analysis performance components in CCPs control. Results revealed that wineries fault in analysis and legislation components. Identification and updating of legislation about As, Cd and Pb contamination risk is in starting performance level for wineries that produce less than 250,000 L/year wineries. Analysis performance level is even lower than legislation. Only one out of every three wineries possess information regarding the concentrations of arsenic, cadmium, and lead in the soils of vineyards where grapes are cultivated. Furthermore, the availability of data on their available concentrations in the soil solution is even more limited. Those wineries that controlled As, Cd and Pb concentrations make it according to official recommendations using techniques based on atomic absorption spectrometry. However, there is a lack of this spectrometry equipment in the wineries own laboratories.

Investigation of the mechanism of silica-induced pulmonary fibrosis: The role of lung microbiota dysbiosis and the LPS/TLR4 signaling pathway

The widespread manufacture of silica and its extensive use, and potential release of silica into the environment pose a serious human health hazard. Silicosis, a severe global public health issue, is caused by exposure to silica, leading to persistent inflammation and fibrosis of the lungs. The underlying pathogenic mechanisms of silicosis remain elusive. Lung microbiota dysbiosis is associated with the development of inflammation and fibrosis. However, limited information is currently available regarding the role of lung microbiota in silicosis. The study therefore is designed to conduct a comprehensive analysis of the role of lung microbiota dysbiosis and establish a basis for future investigations into the potential mechanisms underlying silicosis. Here, the pathological and biochemical parameters were used to systematically assessed the degree of inflammation and fibrosis following silica exposure and treatment with combined antibiotics. The underlying mechanisms were studied via integrative multi-omics analyses of the transcriptome and microbiome. Analysis of 16S ribosomal DNA revealed dysbiosis of the microbial community in silicosis, characterized by a predominance of gram-negative bacteria. Exposure to silica has been shown to trigger lung inflammation and fibrosis, leading to an increased concentration of lipopolysaccharides in the bronchoalveolar lavage fluid. Furthermore, Toll-like receptor 4 was identified as a key molecule in the lung microbiota dysbiosis associated with silica-induced lung fibrosis. All of these outcomes can be partially controlled through combined antibiotic administration. The study findings demonstrate that the dysbiosis of lung microbiota enhances silica-induced fibrosis associated with the lipopolysaccharides/Toll-like receptor 4 pathway and provided a promising target for therapeutic intervention of silicosis.

A combinatorial approach of Monarda citriodora essential oil (MEO) and linalool vapors to control fruit rot of Citrus limon caused by a new pathogen, Aspergillus foetidus, and its underlying mode of action.

Citrus limon (lemon) is a widely cultivated citrus fruit. Significant postharvest losses due to fungi plague its production. Environmental and human health hazards have made the application of synthetic fungicides unsuitable. Despite the previous reports of antifungal activities of essential oil (EO) vapors, their synergistic combinations are understudied. Synergistic vapor combinations are advantageous due to less concentration of active components. This study aimed to isolate and identify postharvest fungal pathogens lemon and to evaluate the antifungal effects of synergistic Monarda citriodora EO (MEO)-constituent vapor combinations in vivo and in vitro. Postharvest fungal pathogens of lemon (C. limon) were isolated from various infected samples. The most pathogenic isolate was identified through morphology and its ITS-based rRNA gene sequencing as Aspergillus foetidus (O4). This is the first report of A. foetidus as a postharvest pathogen of lemon. The minimum fungicidal concentrations (MFCs) of MEO vapors treatment against O4 were 1346.15µL/L air. For carvacrol, hexanal, and linalool, MFC was same (96.16µL/L air). Checkerboard assays demonstrated that 1/4 MFC of MEO (336.54µL/L air) and 1/4 MFC of linalool (24.04µL/L air) (M+L) were synergistic against O4. M+L vapors reduced the O4 growth on lemons during storage by 64%±1.50% and preserved their quality (low weight loss %, unchanged pH, increased ascorbic acid content). Propidium iodide staining, ergosterol content analysis, calcofluor white staining and chitin content analysis revealed the integrity loss of the O4 plasma membrane and cell wall. 2',7'-Dichlorofluorescin diacetate staining revealed accumulation of intracellular reactive oxygen species (ROS), and scanning electron microscopy (SEM) analysis exposed the M+L treated mycelia with malformations. M+L vapors offer protection for lemons from A. foetidus and preserve their quality during storage.

Causes of Countermeasures Against Serious Accidents Caused by Health Hazards of Chemical Substances, Based on Cases of Occupational Accidents in Japan

The purpose of this study was to summarize the typical and specific causes and risk reduction measures of serious accidents in Japan caused by chemical substances in terms of the 10 types of human health hazards in the UN GHS (Globally Harmonized System of Classification and Labelling of Chemicals) classification. The list of "Cases of Major Accidents Caused by Chemical Substances" published on the "Safety in the Workplace Website" of the Ministry of Health, Labor and Welfare (MHLW) was linked to the "Results of GHS Classification by the Government" of the National Institute of Technology and Evaluation (NITE). Analysis was conducted by health hazards in order to obtain reference examples of measures taken against health hazards in response to the revision of the law on autonomous chemical substance management in 2022. Using the text mining tool KH Coder ver. Three using cluster analysis, we grouped causes and measures among serious disasters by health hazard, illustrated co-occurrence networks, and extracted typical examples of each in a co-occurrence network. Representative causes of and measures against occupational accidents caused by health hazardous properties were summarized from the extracted typical cases. Although few occupational accidents were caused by the health hazards of chemicals, when all health hazards were classified into acute toxicity, acute health hazard, and chronic health hazard, contact was a clear cause for many of the acute toxicity and acute health hazards, such as corrosiveness and sensitization. However, many occupational accidents were caused by the physical hazardous aspects of the chemical substances or by the safety aspects of the workplace. Causes of occupational accidents due to health hazards included unsafe behavior and unsafe conditions, or lack of understanding of the physicochemical properties of a substance and specific reactions such as mixing or hydrolysis of the substance. Typical risk reduction measures for health hazards included equipment to prevent human contact with health hazardous substances, systems to control unsafe behavior, promoting understanding of chemical reactions, and providing information about chemicals to all persons involved in testing, research, and subcontract work. The data of occupational accident cases of "death or more than 4 days lost from work" were used. Most of the cases were related to acute health hazards, but relatively few to chronic health hazards, and few occupational accidents were caused by health hazards. Most of the occupational accidents were caused by health hazards due to the physical hazards of chemical substances and inadequate workplace safety. In light of the above, it is necessary in autonomous chemical substance management to first take risk reduction measures for workplace safety and chemical physical hazards, then to prevent contact with acute toxicity and acute health hazards such as corrosiveness and sensitization, and, lastly, to take risk reduction measures for chronic health hazards, using allowable concentrations and controlled concentrations as indices.

Hepatotoxicity of cyanotoxin microcystin-LR in human: Insights into mechanisms of action in the 3D culture model Hepoid-HepaRG

Microcystin-LR (MC-LR) is a potent hepatotoxin produced by harmful cyanobacterial blooms (CyanoHABs). MC-LR targets highly differentiated hepatocytes expressing organic anion transporting polypeptides OATP1B1 and OATP1B3 that are responsible for hepatocellular uptake of the toxin. The present study utilized an advanced 3D in vitro human liver model Hepoid-HepaRG based on the cultivation of collagen-matrix embedded multicellular spheroids composed of highly differentiated and polarized hepatocyte-like cells. 14-d-old Hepoid-HepaRG cultures showed increased expression of OATP1B1/1B3 and sensitivity to MC-LR cytotoxicity at concentrations >10 nM (48 h exposure, EC20 = 26 nM). MC-LR induced neither caspase 3/7 activity nor expression of the endoplasmic reticulum stress marker gene BiP/GRP78, but increased release of pro-inflammatory cytokine IL-8, indicating a necrotic type of cell death. Subcytotoxic (10 nM) and cytotoxic (≥100 nM) MC-LR concentrations disrupted hepatocyte functions, such as xenobiotic metabolism phase-I enzyme activities (cytochrome P450 1A/1B) and albumin secretion, along with reduced expression of CYP1A2 and ALB genes. MC-LR also decreased expression of HNF4A gene, a critical regulator of hepatocyte differentiation and function. Genes encoding hepatobiliary membrane transporters (OATP1B1, BSEP, NTCP), hepatocyte gap junctional gene connexin 32 and the epithelial cell marker E-cadherin were also downregulated. Simultaneous upregulation of connexin 43 gene, primarily expressed by liver progenitor and non-parenchymal cells, indicated a disruption of tissue homeostasis. This was associated with a shift in the expression ratio of E-cadherin to N-cadherin towards the mesenchymal cell marker, a process linked to epithelial-mesenchymal transition (EMT) and hepatocarcinogenesis. The effects observed in the human liver cell in vitro model revealed mechanisms that can potentially contribute to the MC-LR-induced promotion and progression of hepatocellular carcinoma (HCC). Hepoid-HepaRG cultures provide a robust, accessible and versatile in vitro model, capable of sensitively detecting hepatotoxic effects at toxicologically relevant concentrations, allowing for assessing hepatotoxicity mechanisms, human health hazards and impacts of environmental hepatotoxins, such as MC-LR.

Updated Aspects of Safety Regulations for Biomedical Applications of Aerogel Compounds—Compendia-Like Evaluation

Aerogels have recently started to be considered as “advanced materials”; therefore, as a general consideration, aerogels’ toxicity testing should focus on their functionality which resides in their nanoscale open internal porosity. To assess the hazards of organic aerogels, testing at three levels may characterize their biophysical, in vitro and in vivo toxicity, defining distinct categories of aerogels. At the first level of testing, their abiotic characteristics are investigated, and the best aerogel(s) is forwarded to be tested at level 2, wherein in vitro methodologies may mainly evaluate the aerogels’ cellular behavior. Within level 2 of testing, the main characteristics of toxicity are investigated and the selected aerogels are introduced to in vivo animal models at level 3. In the animal model testing, target organs are investigated along with systemic parameters of toxicity. Some study cases are presented for organic or anorganic aerogels. Within this tiered workflow, aerogels-based materials can be tested in terms of human health hazard.

An integrated model for pre- and post-harvest aflatoxin contamination in maize

Aflatoxin contamination caused by colonization of maize by Aspergillus flavus continues to pose a major human and livestock health hazard in the food chain. Increasing attention has been focused on the development of models to predict risk and to identify effective intervention strategies. Most risk prediction models have focused on elucidating weather and site variables on the pre-harvest dynamics of A. flavus growth and aflatoxin production. However fungal growth and toxin accumulation continue to occur after harvest, especially in countries where storage conditions are limited by logistical and cost constraints. In this paper, building on previous work, we introduce and test an integrated meteorology-driven epidemiological model that covers the entire supply chain from planting to delivery. We parameterise the model using approximate Bayesian computation with monthly time-series data over six years for contamination levels of aflatoxin in daily shipments received from up to three sourcing regions at a high-volume maize processing plant in South Central India. The time series for aflatoxin levels from the parameterised model successfully replicated the overall profile, scale and variance of the historical aflatoxin datasets used for fitting and validation. We use the model to illustrate the dynamics of A. flavus growth and aflatoxin production during the pre- and post-harvest phases in different sourcing regions, in short-term predictions to inform decision making about sourcing supplies and to compare intervention strategies to reduce the risks of aflatoxin contamination.

Univariate and multivariate kinetic and structural analysis of photoinduced tetracycline degradation

Tetracycline antibiotics found in waters worldwide pose a tremendous ecological and human health hazard due to bacterial resistances. Various processes are currently investigated to eliminate such anthropogenic micropollutants, among them advanced oxidation processes, where hydroxyl radicals cause disintegration of many organic substances. For mechanistic understanding and optimization for potential in-field use, kinetic descriptions and chemical reaction knowledge are important. Structural identification, quantitation and kinetic description of the substances are investigated via a univariate method, i.e. high-performance liquid-chromatography coupled with mass spectrometry and curve-fitting, and a multivariate method, i.e. absorption spectroscopy and curve resolution-alternating least squares fitting. The latter represented a fast, non-laborious analytical method. The univariate approach revealed four known and two new transformation products. First-order kinetics with follow-up reactions were observed. The univariate method yielded rate constants of about 0.33 min−1 for the degradation of both tetracyclines and distinct rate constants for transformation products, while rate constants of about 0.22 and 0.27 min−1 and an overall rate constant for non-identified transformation products were obtained from multivariate analysis due to the insufficient discriminatory power. Structural characterization, fast and easy kinetic parameter determination of photoinduced degradation may contribute to optimize advanced oxidation processes for the removal of antibiotics from waste water.

The presence of toxic heavy metals in tuna fishes from Laccadive sea and concomitant health risk.

Concentrations of heavy metals in Yellowfin and Skipjack tuna fishes from the Laccadive sea were determined by inductively coupled plasma optical emission spectroscopy (ICP-OES) to evaluate the human health hazards via their consumption. The samples were collected from different atolls of Maldives to ensure a good representation of sample distribution. The metal concentration in tuna fish is found to be below the maximum tolerable limit set by different international organisations. The target hazard quotient values for individual metals were well below the limiting value of 1, indicating an insignificant health risk via the dietary intake of fish. The maximum targeted cancer risk value was 10 -4, indicating low carcinogenic risk from the consumption of tuna fish from the Maldives. Hence, the consumption of tuna from the Laccadive Sea is safe for human health.

Physicochemical Characterization of Acid-Treated Nanocrystal Cellulose and Amorphous Cellulose from Bamboo Sawdust

ABSTRACT The major by-product of bambooworking (i.e. making items from bamboo) is bamboo sawdust, which is a waste product from bambooworking operations and can cause human health hazards. Specifically, this experimental research investigates the effects of acid treatment methods on the physicochemical characteristics of nanocellulose fibers from bamboo sawdust. The experimental acid treatment methods are sulfuric acid hydrolysis for bamboo fiber nanocrystal cellulose (BBF-NCC) and sulfuric acid dissolution for bamboo fiber amorphous cellulose (BBF-AC). The physicochemical properties of nanocellulose from bamboo sawdust include the crystalline structure, morphology, and colloidal stability. The experimental results indicate that BBF-NCC possesses a higher crystallinity index (89.5%), in comparison with 35.4% for BBF-AC. The BBF-NCC is of rod shape with 10 nm in diameter and 50–100 nm in length, while BBF-AC coalesces into clusters of varying sizes. In addition, BBF-NCC possesses higher colloidal stability than BBF-AC, as indicated by a zeta potential of −30.93 mV for BBF-NCC, compared with −19.73 mV for BBF-AC. Essentially, this research is the first to experimentally convert bamboo sawdust into cellulose nanofibers as an eco-friendly and economically viable solution to the waste problem from the bamboomaking industry. Moreover, BBF-NCC and BBF-AC could potentially be adopted as a reinforcing agent in biocomposites or as a carrying agent in multiple applications.