Hazard Assessment Strategies Research Articles

Multiple-Criteria Decision Analysis for Assessments of Chemical Alternatives (MCDA-ACA).

A comprehensive assessment of chemical alternatives (ACA) is necessary to avoid regrettable substitution. In a preceding study, an analysis of six hazard assessment methods found that none of them are fully aligned with the hazard assessment criteria of Article 57 of the European REACH regulation, indicating a need for a method better reflecting hazard assessment schemes in European chemical regulations. This paper presents a multiple-criteria decision analysis (MCDA) method for the ACA that takes the criteria of Article 57 of REACH into account. Investigated and presented are objective hierarchies, the aggregation of objectives, the curvature of the value functions, weights, and the introduction of a classification threshold. The MCDA-ACA method allows for the aggregation of hazards in such a way that poor performance in one hazard cannot be compensated for by good performance in another hazard. The method parameters were developed and tested using two data sets with the aim to classify chemical alternatives into acceptable (nonregrettable) and unacceptable (regrettable) alternatives according to the regulations set in Europe. The flexibility of the general method was explored by adapting the method to align with two hazard assessment schemes, Article 57 of REACH and GreenScreen. The results show that MCDA-ACA is so flexible and transparent that it can easily be adapted to various hazard assessment schemes.

Improving the dichloro-dihydro-fluorescein (DCFH) assay for the assessment of intracellular reactive oxygen species formation by nanomaterials

To facilitate Safe and Sustainable by Design (SSbD) strategies during the development of nanomaterials (NMs), quick and easy in vitro assays to test for hazard potential at an early stage of NM development are essential. The formation of reactive oxygen species (ROS) and the induction of oxidative stress are considered important mechanisms that can lead to NM toxicity. In vitro assays measuring oxidative stress are therefore commonly included in NM hazard assessment strategies. The fluorescence-based dichloro-dihydro-fluorescein (DCFH) assay for cellular oxidative stress is a simple and cost-effective assay, making it a good candidate assay for SSbD hazard testing strategies. It is however subject to several pitfalls and caveats. Here, we provide further optimizations to the assay using 5-(6)-Chloromethyl-2′,7′-dichlorodihydrofluorescein diacetate acetyl ester (CM-H2DCFDA-AE, referred to as DCFH probe), known for its improved cell retention.We measured the release of metabolic products of the DCFH probe from cells to supernatant, direct reactions of CM-H2DCFDA-AE with positive controls, and compared the commonly used plate reader-based DCFH assay protocol with fluorescence microscopy and flow cytometry-based protocols. After loading cells with DCFH probe, translocation of several metabolic products of the DCFH probe to the supernatant was observed in multiple cell types. Translocated DCFH products are then able to react with test substances including positive controls. Our results also indicate that intracellularly oxidized fluorescent DCF is able to translocate from cells to the supernatant. In either way, this will lead to a fluorescent supernatant, making it difficult to discriminate between intra- and extra-cellular ROS production, risking misinterpretation of possible oxidative stress when measuring fluorescence on a plate reader.The use of flow cytometry instead of plate reader-based measurements resolved these issues, and also improved assay sensitivity. Several optimizations of the flow cytometry-based DCFH ISO standard (ISO/TS 19006:2016) were suggested, including loading cells with DCFH probe before incubation with the test materials, and applying an appropriate gating strategy including live-death staining, which was not included in the ISO standard.In conclusion, flow cytometry- and fluorescence microscopy-based read-outs are preferred over the classical plate reader-based read-out to assess the level of intracellular oxidative stress using the cellular DCFH assay.

Deep-sea mining: using hyperbaric conditions to study the impact of sediment plumes in the subtidal clam Spisula solida.

With the growing interest to exploit mineral resources in the deep-sea, there is the need to establish guidelines and frameworks to support hazard and risk assessment schemes. The present study used a subtidal species of filter-feeding bivalve, the clam Spisula solida, as a proxy to better understand the impacts of sediment plumes in marine organisms under hyperbaric conditions. Four concentrations of suspended sediments (0g/L, 1g/L, 2g/L, and 4g/L) were used in a mixture with different grain sizes at 4 Bar for 96h. Functional (filtration rate-FR) and biochemical endpoints (catalase-CAT, glutathione s-transferase-GST, and lipid peroxidation-LPO) were analyzed in the gonads, digestive gland, and gills of S. solida after a 96-h exposure at 4 Bar (the natural limit of the species vertical distribution). The FR showed a decreasing trend with the increasing sediment concentrations (significant effects at 2 and 4g/L). Additionally, significant changes were observed for some of the tested oxidative stress biomarkers, which were concentration and tissue-dependent, i.e., CAT activity was significantly elevated in gills (1g/L treatment), and GST was decreased in digestive gland (1g/L treatment). Overall, the results show that suspended sediments, at 2 and 4g/L, have negative functional impacts in the bivalve S. solida providing additional insights to improve hazard assessment of deep-sea mining. These findings represent a step forward to ensure the mitigation of the potential negative effects of deep-sea resource exploitation.

Consistent seismic hazard and fragility analysis considering combined capacity-demand uncertainties via probability density evolution method

A consistent seismic hazard and fragility framework considering combined capacity-demand uncertainties is proposed, in light of the probability density evolution method (PDEM). The PDEM has solid theoretical basis in the reliability field, and it is integrated within the performance-based earthquake engineering (PBEE) for hazard-fragility assessment in this paper. During the analysis, the sample sets with different assigned probability are required to determine in advance, and the equivalent extreme events with virtual stochastic process are required to establish for solution. Both the uncertainties of capacity and demand are considered, and a combined performance index (CPI) is defined as concerned physical variable in PDEM, through pushover static and timehistory dynamic analyses. A non-stationary stochastic earthquake model is introduced using spectral representation of random functions, and the real characteristics of ground motions are reflected by one or two variables for each probability space. The peak ground acceleration (PGA) and spectral acceleration of the first period [Sa(T1)] of non-stationary stochastic ground motions are then obtained for each earthquake level, and the equivalent extreme events are also performed to discuss the statistical information of PGA or Sa(T1) through PDEM. The exceeding probability of PGA or Sa(T1) for each earthquake level is acquired, and a connection between the fragility value and hazard extent is built. The final 3D consistent hazard-fragility curves are then given, and the exceeding probability for different limit states, earthquake levels as well as intensity exceeding conditions can be predicted. Moreover, a comparison with the four classic approaches in the state-of-the-art is performed to verify the accuracy of PDEM procedure. In general, the framework avoids the pre-defined lognormal fragility shape and proves the combined efficiency and accuracy with the Monte Carlo simulation (MCS). The consistency from probabilistic hazard to fragility is realized without re-selecting earthquake waves, which is mainly attributed to the application of PDEM and non-stationary ground motions. The proposed framework provides new ideas for the consistent non-parametric hazard and fragility assessment scheme in the PBEE.

A Geo-Hazard Risk Assessment Technique for Analyzing Impacts of Surface Subsidence within Onyeama Mine, South East Nigeria

This paper proposes a geo-hazard risk assessment technique to analyze the impacts of surface subsidence monitored in a major coal mine in Nigeria. In many developing countries, disaster risk management schemes have mainly focused on traditional singular hazard assessment, vulnerability assessment, or risk assessment. However, it is difficult to use a singular application to adequately address hazard assessment due to the variation in data requirements, factors associated with the hazards, and the various elements at risk. Most times, hazard assessment schemes heavily rely on data and techniques from different global organizations that collate data on disasters, using various scales and objectives to make informed decisions. Several challenges seemingly arise from total reliance on these kinds of data due to standardization, the exact number of potential victims, and the purpose of the data collection. This makes disaster information collected at the local level unique and assessment schemes more complete; however, the coverage is limited worldwide. The proposed approach combines the spatial relationship between vulnerability assessment and elements at risk to highlight the grave consequences of potential disasters. Thus, the aim is to underscore the importance of integrating local-level inputs in analyzing risk factors and vulnerability indicators for hazard assessment. This study was conducted at the Onyeama coal mine in South East Nigeria. This area has experienced severe negative impacts of subsidence over the years. We exploit data from Sentinel-1 Synthetic Aperture Radar (SAR) Satellites and Small-Baseline Subset Differential Interferometric Synthetic Aperture Radar (SBAS-DInSAR) technique to map the study area. The results generate an elements-at-risk database with a particular focus on population density, road networks, and building networks identified as indices for loss estimation.

Application of Probabilistic Seismic Hazard Assessment to Understand the Earthquake Hazard in Attock City, Pakistan: A Step towards Linking Hazards and Sustainability

Within the last three decades, twelve major earthquakes (Mw > 6.0) have jolted Pakistan and contributed to a heavy death toll and an economic loss of billions of dollars, which is immense for any underdeveloped country. Despite the generalized description of seismic hazards in various regions of Pakistan, densely populated cities still require a detailed and integrated vulnerability analysis to overcome the impact of a significant earthquake. This study aims to integrate seismic hazard assessment schemes to understand the vulnerability of Attock city against an earthquake. It initially evaluates the threat from an earthquake due to tectonic activity in the region, splits the region (about 200 km radius) into six seismic zones and uses area source parameters. The ground motion prediction equations compatible with the study area’s seismotectonic environment are also used in this study. Peak horizontal ground acceleration (PGA) and 5% damped spectral acceleration are critical features of ground motions. The site classification is carried within Attock city, indicating the presence of SB (foundation condition with Vs30 = 760 m/s), SC (foundation condition with Vs30 = 400 m/s) and SD (foundation condition with Vs30 = 300 m/s). The peak ground accelerations for a return period of 475 years at the SB, SC and SD sites are estimated as 0.23 g, 0.28 g and 0.30 g, respectively. Uniform hazard spectra are obtained for each site classification at three return periods (475, 975 and 2475 years). Another possible threat can be the local site conditions of the study area, as Attock city exists on the unlithified sediments of upper Pleistocene to Recent alluvial deposits. That is why microtremor recordings are conducted at 20 sites within Attock city to understand the fundamental frequency (f0), horizontal to vertical spectral amplitude (A0) and Kg parameter, a seismic vulnerability index. The values of f0 are found between 0.6 and 9 Hz and A0 is observed between 2.1 and 5 Hz, whereas the Kg is estimated between 0.24 and 20 Hz. Despite evidence of the seismic vulnerability of Attock city, the current building designs and infrastructure development are not synchronized with the uniform hazard response spectra and the soil amplification, thus enhancing the exposure of the study area to disaster during a major earthquake. This study will be instrumental in pre-disaster mitigation strategies for urban planners and policymakers.

S-05-04 Oxidative potential and oxidative stress as key markers in an early-stage hazard assessment strategy for safe by design – SAbyNA

S-05-04 Oxidative potential and oxidative stress as key markers in an early-stage hazard assessment strategy for safe by design – SAbyNA

Nanocelluloses - Nanotoxicology, Safety Aspects and 3D Bioprinting.

Nanocelluloses have good rheological properties that facilitate the extrusion of nanocellulose gels in micro-extrusion systems. It is considered a highly relevant characteristic that makes it possible to use nanocellulose as an ink component for 3D bioprinting purposes. The nanocelluloses assessed in this book chapter include wood nanocellulose (WNC), bacterial nanocellulose (BNC), and tunicate nanocellulose (TNC), which are often assumed to be non-toxic. Depending on various chemical and mechanical processes, both cellulose nanofibrils (CNF) and cellulose nanocrystals (CNC) can be obtained from the three mentioned nanocelluloses (WNC, BNC, and TNC). Pre/post-treatment processes (chemical and mechanical) cause modifications regarding surface chemistry and nano-morphology. Hence, it is essential to understand whether physicochemical properties may affect the toxicological profile of nanocelluloses. In this book chapter, we provide an overview of nanotoxicology and safety aspects associated with nanocelluloses. Relevant regulatory requirements are considered. We also discuss hazard assessment strategies based on tiered approaches for safety testing, which can be applied in the early stages of the innovation process. Ensuring the safe development of nanocellulose-based 3D bioprinting products will enable full market use of these sustainable resources throughout their life cycle.

From Extrapolation to Precision Chemical Hazard Assessment: The Ecdysone Receptor Case Study.

Hazard assessment strategies are often supported by extrapolation of damage probabilities, regarding chemical action and species susceptibilities. Yet, growing evidence suggests that an adequate sampling of physiological responses across a representative taxonomic scope is of paramount importance. This is particularly relevant for Nuclear Receptors (NR), a family of transcription factors, often triggered by ligands and thus, commonly exploited by environmental chemicals. Within NRs, the ligand-induced Ecdysone Receptor (EcR) provides a remarkable example. Long regarded as arthropod specific, this receptor has been extensively targeted by pesticides, seemingly innocuous to non-target organisms. Yet, current evidence clearly suggests a wider presence of EcR orthologues across metazoan lineages, with unknown physiological consequences. Here, we address the state-of-the-art regarding the phylogenetic distribution and functional characterization of metazoan EcRs and provide a critical analysis of the potential disruption of such EcRs by environmental chemical exposure. Using EcR as a case study, hazard assessment strategies are also discussed in view of the development of a novel “precision hazard assessment paradigm.

Transgenerational inheritance of chemical-induced signature: A case study with simvastatin

The hypothesis that exposure to certain environmental chemicals during early life stages may disrupt reproduction across multiple non-exposed generations has significant implications for understanding disease etiology and adverse outcomes. We demonstrate here reproductive multi and transgenerational effects, at environmentally relevant levels, of one of the most prescribed human pharmaceuticals, simvastatin, in a keystone species, the amphipod Gammarus locusta. The transgenerational findings has major implications for hazard and risk assessment of pharmaceuticals and other contaminants of emerging concern given that transgenerational effects of environmental chemicals are not addressed in current hazard and risk assessment schemes. Considering that the mevalonate synthesis, one of the key metabolic pathways targeted by simvastatin, is highly conserved among metazoans, these results may also shed light on the potential transgenerational effects of simvastatin on other animals, including humans.

A unified approach for including non-extractable residues (NER) of chemicals and pesticides in the assessment of persistence

All chemicals form non-extractable residues (NER) to various extents in environmental media like soil, sediment, plants and animals. NER can be quantified in environmental fate studies using isotope-labeled (such as 14C or 13C) tracer compounds. Previous NER definitions have led to a mismatch of legislation and state of knowledge in research: the residues are assumed to be either irreversibly bound degradation products or at least parts of these residues can be released. In the latter assumption, soils and sediments are a long-term source of slowly released residues. We here present a conceptual experimental and modeling approach to characterize non-extractable residues and provide guidance how they should be considered in the persistence assessment of chemicals and pesticides. Three types of NER can be experimentally discriminated: sequestered and entrapped residues (type I), containing either the parent substance or xenobiotic transformation products or both and having the potential to be released, which has indeed been observed. Type II NER are residues that are covalently bound to organic matter in soils or sediments or to biological tissue in organisms and that are considered being strongly bound with very low remobilization rates like that of humic matter degradation rates. Type III NER comprises biogenic NER (bioNER) after degradation of the xenobiotic chemical and anabolic formation of natural biomolecules like amino acids and phospholipids, and other biomass compounds. We developed the microbial turnover to biomass (MTB) model to predict the formation of bioNER based on the structural properties of chemicals. Further, we proposed an extraction sequence to obtain a matrix containing only NER. Finally, we summarized experimental methods to distinguish the three NER types. Type I NER and type II NER should be considered as potentially remobilizable residues in persistence assessment but the probability of type II release is much lower than that of type I NER, i.e., type II NER in soil are “operationally spoken” irreversibly bound and can be released only in minute amounts and at very slow rates, if at all. The potential of remobilization can be evaluated by chemical, physical and biological methods. BioNER are of no environmental concern and, therefore, can be assessed as such in persistence assessment. The general concept presented is to consider the total amount of NER minus potential bioNER as the amount of xenoNER, type I + II. If a clear differentiation of type I and type II is possible, for the calculation of half-life type I NER are considered as not degraded parent substance or transformation product(s). On the contrary, type II NER may generally be considered as (at least temporarily) removed. Providing proof for type II NER is the most critical issue in NER assessment and requires additional research. If no characterization and additional information on NER are available, it is recommended to assess the total amount as potentially remobilizable. We propose our unified approach of NER characterization and evaluation to be implemented into the persistence and environmental hazard assessment strategies for REACH chemicals and biocides, human and veterinary pharmaceuticals, and pesticides, irrespective of the different regulatory frameworks.

A novel rockfall hazard assessment using laser scanning data and 3D modelling in GIS

Rockfall hazards occur widely in regions with steep terrain such as Kinta Valley, Malaysia. Rockfalls threaten urban areas and the transportation corridors that pass through such areas. This paper proposes a comprehensive rockfall hazard assessment strategy based on high-resolution laser scanning data (LiDAR), both airborne and terrestrial. It provides (1) rockfall source identification by developing a hybrid model based on a bagging neural network (BBNN), which is compared with various machine learning algorithms and ensemble models (bagging, boosting, voting) and a Gaussian mixture model; (2) 3D modelling of rockfall kinematic processes (trajectory distribution, frequency, velocity, kinetic energy, bounce height, impact location); and (3) hazard zonation based on spatial modelling in combination with an analytical hierarchy process (AHP) in a geographic information system (GIS). In addition, mitigation measures are suggested based on the modelling results. The proposed methodology was validated in three study areas to test the applicability and generalisability of the methods. The results show that the proposed hybrid model can accurately identify rockfall source areas at the regional scale. It achieved a 97% training accuracy and 5-fold cross-validation area under curve (AUC) value of 0.96. The mechanical parameters of the developed 3D model were calibrated with an accuracy of 97%, 93% and 95% for Gunung Lang, Gua Tambun and Gunung Rapat areas, respectively. In addition, the proposed spatial model effectively delineates areas at risk of rockfalls. This method provides a comprehensive understanding of rockfall hazards that can assist authorities to develop proper management and protection of urban areas and transportation corridors.

Pyroclastic density currents at Etna volcano, Italy: The 11 February 2014 case study

On 11 February 2014, a considerable volume (0.82 to 1.29 × 106 m3) of unstable and hot rocks detached from the lower–eastern flank of the New Southeast Crater (NSEC) at Mt. Etna, producing a pyroclastic density current (PDC). This event was by far the most extensive ever recorded at Mt. Etna since 1999 and has attracted the attention of the scientific community and civil protection to this type of volcanic phenomena, usually occurring without any clear volcanological precursor and especially toward the mechanisms which led to the crater collapse, the PDC flow dynamics and the related volcanic hazard. We present here the results of the investigation carried out on the 11 February 2014 collapse and PDC events; data were obtained through a multidisciplinary approach which includes the analysis of photograph, images from visible and thermal surveillance cameras, and the detailed stratigraphic, textural and petrographic investigations of the PDC deposits. Results suggest that the collapse and consequent PDC was the result of a progressive thermal and mechanical weakening of the cone by repeated surges of magma passing through it during the eruptive activity prior to the 11 February 2014 events, as well as pervasive heating and corrosion by volcanic gas. The collapse of the lower portion of the NSEC was followed by the formation of a relatively hot (up to 750 °C) dense flow which travelled about 2.3 km from the source, stopping shortly after the break of the slope and emplacing the main body of the deposit which ranges between 0.39 and 0.92 × 106 m3. This flow was accompanied a relatively hot cloud of fine ash that dispersed over a wider area.The results presented may contribute to the understanding of this very complex type of volcanic phenomena at Mt. Etna and in similar volcanic settings of the world. In addition, results will lay the basis for the modeling of crater collapse and relative PDC events and consequently for the planning of hazard assessment strategies aimed at reducing the potential risks to scientists and tens of thousands of tourists visiting Etna's summit areas every year.

Twenty-First Century In Vitro Toxicology Testing Methods and the Assessment of e-Cigarettes

Twenty-First Century <i>In Vitro</i> Toxicology Testing Methods and the Assessment of e-Cigarettes

Enhancing the performance of hazard indexes in assessing hot spots of harbour areas by considering hydrodynamic parameters

The hazard assessment strategies for harbour areas usually rely on tools able to predict environmental threats posed by contaminated sediments, mostly based on biological and chemical parameters and distinctly less on hydrological factors. Although ports are considered semi-enclosed and low-energy systems with scarce capacity to disperse contaminants to the open sea, the hydrological pattern established within the port basin cannot be neglected, especially when the localisation of hot spots is required for clean-up and remediation actions. In the present study we considered both approaches (biological/chemical and hydrological) for assessing hot spots of harbour areas. In particular, the relationship between the sediment hazard assessment c_NWAC (cumulative Normalized and Weighted Average Concentration) index (which is based on chemical and biological data) and a properly selected hydrodynamic parameter (the bottom shear stress) of the port area was investigated. This study demonstrates that marine currents influence significantly the fine-grained fraction distribution of the surficial sediments, and thus, the spatial and temporal variability of contaminant concentration. The evaluation of hydrodynamic parameters enhances the performance of hazard tools in the localization of areas of most concern and thus a detailed knowledge of the hydrodynamic features of the port seabed is advisable before defining a proper characterisation strategy for the harbour area.

Case studies putting the decision-making framework for the grouping and testing of nanomaterials (DF4nanoGrouping) into practice

Case studies covering carbonaceous nanomaterials, metal oxide and metal sulphate nanomaterials, amorphous silica and organic pigments were performed to assess the Decision-making framework for the grouping and testing of nanomaterials (DF4nanoGrouping). The usefulness of the DF4nanoGrouping for nanomaterial hazard assessment was confirmed. In two tiers that rely exclusively on non-animal test methods followed by a third tier, if necessary, in which data from rat short-term inhalation studies are evaluated, nanomaterials are assigned to one of four main groups (MGs). The DF4nanoGrouping proved efficient in sorting out nanomaterials that could undergo hazard assessment without further testing. These are soluble nanomaterials (MG1) whose further hazard assessment should rely on read-across to the dissolved materials, high aspect-ratio nanomaterials (MG2) which could be assessed according to their potential fibre toxicity and passive nanomaterials (MG3) that only elicit effects under pulmonary overload conditions. Thereby, the DF4nanoGrouping allows identifying active nanomaterials (MG4) that merit in-depth investigations, and it provides a solid rationale for their sub-grouping to specify the further information needs. Finally, the evaluated case study materials may be used as source nanomaterials in future read-across applications. Overall, the DF4nanoGrouping is a hazard assessment strategy that strictly uses animals as a last resort.

The Operational Drought Hazard Assessment Scheme – Performance and Preliminary Results

Abstract Predicted climate change may have negative impact on many environmental components including vegetation by increase of evapotranspiration and reduction of available water resources. Moreover, a growing global population and extensive use of water for irrigation and industry result in increasing demand for water. Facing these threats, quantitative and qualitative protection of water resources requires development of tools for drought assessment and prediction to support effective decision making and mitigate the impacts of droughts. Therefore, the Institute of Meteorology and Water Management, National Research Institute has developed and implemented a set of tools for the operational drought hazard assessment. The developed tools cover drought indices estimation, assessment of sensitivity to it formation and drought hazard prediction. They are streamlined into an operational scheme combined with data assimilation routines and products generation procedures. A drought hazard assessment scheme was designed to be implemented into the platform of a hydrological system supporting the operational work of hydrological forecast offices. The scheme was launched to run operationally for the selected catchments of the Odra River and the Wisla River basins. The crucial resulting products are presented on the website operated by IMWM-NRI: POSUCH@ (Operational System for Providing Drought Prediction and Characteristics) (http://posucha.imgw.pl/). The paper presents the scheme and preliminary results obtained for the drought event which began in August 2011.

A Remote Sensing Approach for Landslide Hazard Assessment on Engineered Slopes

Earthworks such as embankments and cuttings are integral to road and rail networks but can be prone to instability, necessitating rigorous and continual monitoring. To date, the potential of remote sensing for earthwork hazard assessment has been largely overlooked. However, techniques such as airborne laser scanning (ALS) are now ripe for addressing these challenges. This research presents the development of a novel hazard assessment strategy, combining high-resolution remote sensing with a numerical modeling approach. The research was implemented at a railway test site located in northern England, U.K.; ALS data and multispectral aerial imagery facilitated the determination of key slope stability variables, which were then used to parameterize a coupled hydrological-geotechnical model, in order to simulate slope behavior under current and future climates. A software toolset was developed to integrate the core elements of the methodology and determine resultant slope failure hazard which could then be mapped and queried within a geographical information system environment. Results indicate that the earthworks are largely stable, which is in broad agreement with the management company's slope hazard grading data, and in terms of morphological analysis, the remote methodology was able to correctly identify 99% of earthworks classed as embankments and 100% of cuttings. The developed approach provides an effective and practicable method for remotely quantifying slope failure hazard at fine spatial scales (0.5 m) and for prioritizing and reducing on-site inspection.

Three-dimensional resistivity tomography in extreme coastal terrain amidst dense cultural signals: application to cliff stability assessment at the historic D-Day site

SUMMARY Pointe du Hoc overlooking the English Channel in Normandy, France was host to one of the most important military engagements of World War II but is vulnerable to cliff collapses that threaten important German fortifications including the forward observation post (OP) and Rudder’s command post. The objective of this study is to apply advanced 3-D resistivity tomography towards a detailed site stability assessment with special attention to the two at-risk buildings. 3-D resistivity tomography data sets at Pointe du Hoc in the presence of extreme topography and dense cultural clutter have been successfully acquired, inverted and interpreted. A cliff stability hazard assessment scheme has been designed in which regions of high resistivity are interpreted as zones of open, dry fractures with a moderate mass movement potential. Regions of low resistivity are zones of wet, clay-filled fractures with a high mass movement potential. The OP tomography results indicate that the highest mass movement hazard appears to be associated with the marine caverns at the base of the cliff that are positioned at the point of strongest wave attack. These caverns likely occupy the future site of development of a sea arch that will threaten the OP building. The mass movement potential at the Rudder’s command post area is low to moderate. The greatest risk there is associated with soil wedge failures at the top of the cliffs.

A Combined Methodology for Landslide Risk Mitigation in Basilicata Region by Using LIDAR Technique and Rockfall Simulation

Rockfalls represent a significant geohazards along the SS18 road of Basilicata Region, Italy. The management of these rockfall hazards and the mitigation of the risk require innovative approaches and technologies. This paper discusses a hazard assessment strategy and risk mitigation for rockfalls in a section of SS118, along the coast of Maratea, using LIDAR technique and spatial modelling. Historical rockfall records were used to calibrate the physical characteristics of the rockfall processes. The results of the simulations were used to define the intervention actions and engineering strategy for the mitigation of the phenomena. Within two months, 260 linear meters of high-energy rockfall barriers for impact energies up to 3000 kJ were installed. After that, according to road authority, the SS18 road was opened in a safe condition. The results represent a valid cognitive support to choose the most appropriate technical solution for topography strengthening and an example of good practice for the cooperation between innovative technologies and field emergency management.