Neurite Guidance Research Articles

Gene expression changes of interconnected spared cortical neurons 7 days after ischemic infarct of the primary motor cortex in the rat.

After cortical injury resulting from stroke, some recovery can occur and may involve spared areas of the cerebral cortex reorganizing to assume functions previously controlled by the damaged cortical areas. No studies have specifically assessed gene expression changes in remote neurons with axonal processes that terminate in the infarcted tissue, i.e., the subset of neurons most likely to be involved in regenerative processes. By physiologically identifying the primary motor area controlling forelimb function in adult rats (caudal forelimb area = CFA), and injecting a retrograde tract-tracer, we labeled neurons within the non-primary motor cortex (rostral forelimb area = RFA) that project to CFA. Then, 7 days after a CFA infarct (n = 6), we used laser capture microdissection techniques to harvest labeled neurons in RFA. Healthy, uninjured rats served as controls (n = 6). Biological interactions and functions of gene profiling were investigated by Affymetrix Microarray, and Ingenuity Pathway Analysis. A total of 143 up- and 128 down-regulated genes showed significant changes (fold change ≥1.3 and p < 0.05). The canonical pathway, "Axonal Guidance Signaling," was overrepresented (p value = 0.002). Significantly overrepresented functions included: branching of neurites, organization of cytoskeleton, dendritic growth and branching, organization of cytoplasm, guidance of neurites, development of cellular protrusions, density of dendritic spines, and shape change (p = 0.000151-0.0487). As previous studies have shown that spared motor areas are important in recovery following injury to the primary motor area, the results suggest that these gene expression changes in remote, interconnected neurons may underlie reorganization and recovery mechanisms.

An aligned 3D neuronal-glial co-culture model for peripheral nerve studies

In this study we report on the development of a 3D in vitro peripheral nerve model using aligned electrospun polycaprolactone fibre scaffolds manufactured under tightly controlled and reproducible conditions with uniform diameters of 1 μm, 5 μm and 8 μm. Fibres were characterized by SEM for diameter, density and alignment properties and formed in to scaffolds for 3D in vitro culture. Three different approaches were adopted using: i) neuronal or primary Schwann cell cultures alone; ii) neuronal and primary Schwann cells in co-culture and iii) isolated dorsal root ganglion cultures, containing both neuronal and Schwann cells, with immunohistochemical and 3D confocal microscopy analysis. Neurite guidance was evident on all fibres diameters with the longest neurites detected on 8 μm fibres when cultured alone. However, co-culture with primary Schwann cells was found to enable neurite formation on all scaffolds. Dorsal root ganglion explants when grown on scaffolds showed both organised aligned neurite guidance and notably the co-localization of Schwann cells with neurites. Neurite lengths of up to 2.50 mm were routinely observed using 1 μm diameter fibres after 10 days and all cultures demonstrated a migrating Schwann cell ‘front’ of up to 2.70 mm (1 μm diameter fibres). Thus, a direct relationship was found between fibre diameter, neurite outgrowth and Schwann cell morphology. This work therefore supports the use of aligned electrospun PCL microfibres for the development of 3D peripheral nerve models in vitro. We envisage such models having future value in a number of areas including developmental biology, disease studies and the design of devices and scaffolds for peripheral nerve repair.

Abnormal expression of stathmin 1 in brain tissue of patients with intractable temporal lobe epilepsy and a rat model

Microtubule dynamics have been shown to contribute to neurite outgrowth, branching, and guidance. Stathmin 1 is a potent microtubule-destabilizing factor that is involved in the regulation of microtubule dynamics and plays an essential role in neurite elongation and synaptic plasticity. Here, we investigate the expression of stathmin 1 in the brain tissues of patients with intractable temporal lobe epilepsy (TLE) and experimental animals using immunohistochemistry, immunofluorescence and western blotting. We obtained 32 temporal neocortex tissue samples from patients with intractable TLE and 12 histologically normal temporal lobe tissues as controls. In addition, 48 Sprague Dawley rats were randomly divided into six groups, including one control group and five groups with epilepsy induced by lithium chloride-pilocarpine. Hippocampal and temporal lobe tissues were obtained from control and epileptic rats on Days 1, 7, 14, 30, and 60 after kindling. Stathmin 1 was mainly expressed in the neuronal membrane and cytoplasm in the human controls, and its expression levels were significantly higher in patients with intractable TLE. Moreover, stathmin 1 was also expressed in the neurons of both the control and the experimental rats. Stathmin 1 expression was decreased in the experimental animals from 1 to 14 days postseizure and then significantly increased at Days 30 and 60 compared with the control group. Many protruding neuronal processes were observed in the TLE patients and in the chronic stage epileptic rats. These data suggest that stathmin 1 may participate in the abnormal network reorganization of synapses and contribute to the pathogenesis of TLE.

High-Content Neurite Development Study Using Optically Patterned Substrates

The study of neurite guidance in vitro relies on the ability to reproduce the distribution of attractive and repulsive guidance molecules normally expressed in vivo. The identification of subtle variations in the neurite response to changes in the spatial distribution of extracellular molecules can be achieved by monitoring the behavior of cells on protein gradients. To do this, automated high-content screening assays are needed to quantify the morphological changes resulting from growth on gradients of guidance molecules. Here, we present the use of laser-assisted protein adsorption by photobleaching (LAPAP) to allow the fabrication of large-scale substrate-bound laminin-1 gradients to study neurite extension. We produced thousands of gradients of different slopes and analyzed the variations in neurite attraction of neuron-like cells (RGC-5). An image analysis algorithm processed bright field microscopy images, detecting each cell and quantifying the soma centroid and the initiation, terminal and turning angles of the longest neurite.

How reggies regulate regeneration and axon growth

The microdomain-forming proteins reggie-1 and reggie-2 (alias flotillins) were found to be upregulated in axon-regenerating fish retinal ganglion cells (RGCs). They were subsequently shown to be indispensible for axon regeneration and neurite extension in fish and mammals. Our current concept proposes that reggies--often together with the cellular Prion protein (PrP)--regulate the turnover of membrane and specific membrane proteins at the growth cone, which is the prerequisite for neurite elongation and guidance.

Myosin II activity regulates neurite outgrowth and guidance in response to chondroitin sulfate proteoglycans

Chondroitin sulfate proteoglycans (CSPGs) are major components of the extracellular matrix in the CNS that inhibit axonal regeneration after CNS injury. Signaling pathways in neurons triggered by CSPGs are still largely unknown. In this study, using well-characterized in vitro assays for neurite outgrowth and neurite guidance, we demonstrate a major role for myosin II in the response of neurons to CSPGs. We found that the phosphorylation of myosin II regulatory light chains is increased by CSPGs. Specific inhibition of myosin II activity with blebbistatin allows growing neurites to cross onto CSPG-rich areas and increases the length of neurites of neurons growing on CSPGs. Using specific gene knockdown, we demonstrate selective roles for myosin IIA and IIB in these processes. Time lapse microscopy and immunocytochemistry demonstrated that CSPGs also inhibit cell adhesion and cell spreading. Inhibition of myosin II selectively accelerated neurite initiation without altering cell adhesion and spreading on CSPGs.

Nervous systems of the sea anemone Nematostella vectensis are generated by ectoderm and endoderm and shaped by distinct mechanisms

As a sister group to Bilateria, Cnidaria is important for understanding early nervous system evolution. Here we examine neural development in the anthozoan cnidarian Nematostella vectensis in order to better understand whether similar developmental mechanisms are utilized to establish the strikingly different overall organization of bilaterian and cnidarian nervous systems. We generated a neuron-specific transgenic NvElav1 reporter line of N. vectensis and used it in combination with immunohistochemistry against neuropeptides, in situ hybridization and confocal microscopy to analyze nervous system formation in this cnidarian model organism in detail. We show that the development of neurons commences in the ectoderm during gastrulation and involves interkinetic nuclear migration. Transplantation experiments reveal that sensory and ganglion cells are autonomously generated by the ectoderm. In contrast to bilaterians, neurons are also generated throughout the endoderm during planula stages. Morpholino-mediated gene knockdown shows that the development of a subset of ectodermal neurons requires NvElav1, the ortholog to bilaterian neural elav1 genes. The orientation of ectodermal neurites changes during planula development from longitudinal (in early-born neurons) to transverse (in late-born neurons), whereas endodermal neurites can grow in both orientations at any stage. Our findings imply that elav1-dependent ectodermal neurogenesis evolved prior to the divergence of Cnidaria and Bilateria. Moreover, they suggest that, in contrast to bilaterians, almost the entire ectoderm and endoderm of the body column of Nematostella planulae have neurogenic potential and that the establishment of connectivity in its seemingly simple nervous system involves multiple neurite guidance systems.

Influence of cAMP and protein kinase A on neurite length from spiral ganglion neurons

Regrowth of peripheral spiral ganglion neuron (SGN) fibers is a primary objective in efforts to improve cochlear implant outcomes and to potentially reinnervate regenerated hair cells. Cyclic adenosine monophosphate (cAMP) regulates neurite growth and guidance via activation of protein kinase A (PKA) and Exchange Protein directly Activated by Cylic AMP (Epac). Here we explored the effects of cAMP signaling on SGN neurite length in vitro. We find that the cAMP analog, cpt-cAMP, exerts a biphasic effect on neurite length; increasing length at lower concentrations and reducing length at higher concentrations. This biphasic response occurs in cultures plated on laminin, fibronectin, or tenascin C suggesting that it is not substrate dependent. cpt-cAMP also reduces SGN neurite branching. The Epac-specific agonist, 8-pCPT-2′-O-Me-cAMP, does not alter SGN neurite length. Constitutively active PKA isoforms strongly inhibit SGN neurite length similar to higher levels of cAMP. Chronic membrane depolarization activates PKA in SGNs and also inhibits SGN neurite length. However, inhibition of PKA fails to rescue neurite length in depolarized cultures implying that activation of PKA is not necessary for the inhibition of SGN neurite length by chronic depolarization. Expression of constitutively active phosphatidylinositol 3-kinase, but not c-Jun N-terminal kinase, isoforms partially rescues SGN neurite length in the presence of activated PKA. Taken together, these results suggest that activation of cAMP/PKA represents a potential strategy to enhance SGN fiber elongation following deafness; however such therapies will likely require careful titration so as to promote rather than inhibit nerve fiber regeneration.

Engineering of adult human neural stem cells differentiation through surface micropatterning

Interaction between differentiating neural stem cells and the extracellular environment guides the establishment of cell polarity during nervous system development. Developing neurons read the physical properties of the local substrate in a contact-dependent manner and retrieve essential guidance cues. To restore damage brain area by tissue engineering, the biomaterial scaffold has to mimic this microenvironment to allow organized tissue regeneration. To establish the validity of using microgrooved surfaces in order to simultaneously provide to primary adult human neural stem cells a permissive growth environment and a guide for neurite outgrowth in a pre-established direction, we have studied the long-term culture of adult human neural stem cells from patient biopsies on microgrooved polymers. By exploiting polymer moulding techniques, we engineered non-cytotoxic deep microstructured surfaces of polydimethylsiloxane (PDMS) exhibiting microchannels of various widths. Our results demonstrate that precoated micropatterned PDMS surfaces can serve as effective neurite guidance surfaces for human neural stem cells. Immunocytochemistry analysis show that channel width can impact strongly development and differentiation. In particular we found an optimal microchannel width, that conciliates a high differentiation rate with a pronounced alignment of neurites along the edges of the microchannels. The impact of the microstructures on neurite orientation turned out to be strongly influenced by cell density, attesting that cell/surface interactions at the origin of the alignment effect, are in competition with cell/cell interactions tending to promote interconnected networks of cells. Considering all these effects, we have been able to design appropriate structures allowing to obtain neuron development and differentiation rate comparable to a plane unpatterned surface, with an efficient neurite guidance and a long-term cell viability.

In situ guidance of individual neurites by wet femtosecond-laser processing of organosilane monolayers

In situ guidance of individual neurites by wet femtosecond-laser processing of organosilane monolayers

Guidance of dorsal root ganglion neurites and Schwann cells by isolated Schwann cell topography on poly(dimethyl siloxane) conduits and films

Biomimetic replicas of cellular topography have been utilized to direct neurite outgrowth. Here, we cultured postnatal rat dorsal root ganglion (DRG) explants in the presence of Schwann cell (SC) topography to determine the influence of SC topography on neurite outgrowth. Four distinct poly(dimethyl siloxane) conduits were fabricated within which DRG explants were cultured. To determine the contribution of SC topographical features to neurite guidance, the extent of neurite outgrowth into unpatterned conduits, conduits with randomly oriented SC replicas, and conduits with SC replicas parallel or perpendicular to the conduit long axis was measured. Neurite directionality and outgrowth from DRG were also quantified on two-dimensional SC replicas with orientations corresponding to the four conduit conditions. Additionally, live SC migration and neurite extension from DRG on SC replicas were examined as a first step toward quantification of the interactions between live SC and navigating neurites on SC replicas. DRG neurite outgrowth and morphology within conduits and on two-dimensional SC replicas were directed by the underlying SC topographical features. Maximal neurite outgrowth and alignment to the underlying features were observed into parallel conduits and on parallel two-dimensional substrates, whereas the least extent of outgrowth was observed into perpendicular conduits and on perpendicular two-dimensional replica conditions. Additionally, neurites on perpendicular conditions turned to extend along the direction of underlying SC topography. Neurite outgrowth exceeded SC migration in the direction of the underlying anisotropic SC replica after two days in culture. This finding confirms the critical role that SC have in guiding neurite outgrowth and suggests that the mechanism of neurite alignment to SC replicas depends on direct contact with cellular topography. These results suggest that SC topographical replicas may be used to direct and optimize neurite alignment, and emphasize the importance of SC features in neurite guidance.

Spatial Phosphoprotein Profiling Reveals a Compartmentalized Extracellular Signal-regulated Kinase Switch Governing Neurite Growth and Retraction

Brain development and spinal cord regeneration require neurite sprouting and growth cone navigation in response to extension and collapsing factors present in the extracellular environment. These external guidance cues control neurite growth cone extension and retraction processes through intracellular protein phosphorylation of numerous cytoskeletal, adhesion, and polarity complex signaling proteins. However, the complex kinase/substrate signaling networks that mediate neuritogenesis have not been investigated. Here, we compare the neurite phosphoproteome under growth and retraction conditions using neurite purification methodology combined with mass spectrometry. More than 4000 non-redundant phosphorylation sites from 1883 proteins have been annotated and mapped to signaling pathways that control kinase/phosphatase networks, cytoskeleton remodeling, and axon/dendrite specification. Comprehensive informatics and functional studies revealed a compartmentalized ERK activation/deactivation cytoskeletal switch that governs neurite growth and retraction, respectively. Our findings provide the first system-wide analysis of the phosphoprotein signaling networks that enable neurite growth and retraction and reveal an important molecular switch that governs neuritogenesis.

EngineeredIn Vitro/In SilicoModels To Examine Neurite Target Preference

Research on spinal cord injury (SCI) repair focuses on developing mechanisms to allow neurites to grow past an injury site. In this article, we observe that numerous divergent paths (i.e., spinal roots) are present along the spinal column, and hence guidance strategies must be devised to ensure that regrowing neurites reach viable targets. Therefore, we have engineered an in vitro micropatterned model in which cultured E7 dorsal root ganglia (DRG) explants may enter alternate pathways (?roots?) along a branching micropattern. Alongside this in vitro model, we have developed an in silico simulation that we validate by comparison with independent experiments. We find in both in silico and in vitro models that the probability of a neurite entering a given root decreases exponentially with respect to the number of roots away from the DRG; consequently, the likelihood of neurites reaching a distant root can be vanishingly small. This result represents a starting point for future strategies to optimize the likelihood that neurites will reach appropriate targets in the regenerating nervous system, and provides a new computational tool to evaluate the feasibility and expected success of neurite guidance in complex geometries.

Polystyrene replicas of neuronal basal lamina act as excellent guides for regenerating neurites

Various scaffolds, natural or artificial, have been used for neural repair, including basal lamina scaffolds obtained through extraction of nerves. Here we tested whether plastic casts of such preparations could be used for neurite guidance. To this end, longitudinal micron thick sections of rat sciatic nerve were extracted with detergents and treated with Dnase, yielding an acellular basal lamina master. From the basal lamina master a polydimethylsiloxane (PDMS) mold was made. Then a polystyrene replica was made using the PDMS mold as the master. The polystyrene replica showed high similarity to the master within nanometer resolution as revealed by scanning electron microscopy. Organ cultured mouse dorsal root ganglia grown on the polystyrene replica and the master preparation exhibited guided outgrowth of neurites as assayed by two-dimensional fast Fourier transform analysis on preparations, where the neurites had been visualized by β-III-tubulin staining. The neurites aligned longitudally in the direction of the original basal lamina tubes. Thus, using inexpensive methods it is possible to make replicas of basal lamina which can be used for neurite guidance. This opens a new avenue for nerve reconstruction.

Fabrication of Micropatterned Hydrogels for Neural Culture Systems using Dynamic Mask Projection Photolithography

Increasingly, patterned cell culture environments are becoming a relevant technique to study cellular characteristics, and many researchers believe in the need for 3D environments to represent in vitro experiments which better mimic in vivo qualities 1-3. Studies in fields such as cancer research 4, neural engineering 5, cardiac physiology 6, and cell-matrix interaction7,8have shown cell behavior differs substantially between traditional monolayer cultures and 3D constructs.Hydrogels are used as 3D environments because of their variety, versatility and ability to tailor molecular composition through functionalization 9-12. Numerous techniques exist for creation of constructs as cell-supportive matrices, including electrospinning13, elastomer stamps14, inkjet printing15, additive photopatterning16, static photomask projection-lithography17, and dynamic mask microstereolithography18. Unfortunately, these methods involve multiple production steps and/or equipment not readily adaptable to conventional cell and tissue culture methods. The technique employed in this protocol adapts the latter two methods, using a digital micromirror device (DMD) to create dynamic photomasks for crosslinking geometrically specific poly-(ethylene glycol) (PEG) hydrogels, induced through UV initiated free radical polymerization. The resulting "2.5D" structures provide a constrained 3D environment for neural growth. We employ a dual-hydrogel approach, where PEG serves as a cell-restrictive region supplying structure to an otherwise shapeless but cell-permissive self-assembling gel made from either Puramatrix or agarose. The process is a quick simple one step fabrication which is highly reproducible and easily adapted for use with conventional cell culture methods and substrates.Whole tissue explants, such as embryonic dorsal root ganglia (DRG), can be incorporated into the dual hydrogel constructs for experimental assays such as neurite outgrowth. Additionally, dissociated cells can be encapsulated in the photocrosslinkable or self polymerizing hydrogel, or selectively adhered to the permeable support membrane using cell-restrictive photopatterning. Using the DMD, we created hydrogel constructs up to ~1mm thick, but thin film (<200 μm) PEG structures were limited by oxygen quenching of the free radical polymerization reaction. We subsequently developed a technique utilizing a layer of oil above the polymerization liquid which allowed thin PEG structure polymerization.In this protocol, we describe the expeditious creation of 3D hydrogel systems for production of microfabricated neural cell and tissue cultures. The dual hydrogel constructs demonstrated herein represent versatile in vitro models that may prove useful for studies in neuroscience involving cell survival, migration, and/or neurite growth and guidance. Moreover, as the protocol can work for many types of hydrogels and cells, the potential applications are both varied and vast.

Fabrication of Micropatterned Hydrogels for Neural Culture Systems using Dynamic Mask Projection Photolithography

Increasingly, patterned cell culture environments are becoming a relevant technique to study cellular characteristics, and many researchers believe in the need for 3D environments to represent in vitro experiments which better mimic in vivo qualities 1-3. Studies in fields such as cancer research 4, neural engineering 5, cardiac physiology 6, and cell-matrix interaction7,8have shown cell behavior differs substantially between traditional monolayer cultures and 3D constructs. Hydrogels are used as 3D environments because of their variety, versatility and ability to tailor molecular composition through functionalization 9-12. Numerous techniques exist for creation of constructs as cell-supportive matrices, including electrospinning13, elastomer stamps14, inkjet printing15, additive photopatterning16, static photomask projection-lithography17, and dynamic mask microstereolithography18. Unfortunately, these methods involve multiple production steps and/or equipment not readily adaptable to conventional cell and tissue culture methods. The technique employed in this protocol adapts the latter two methods, using a digital micromirror device (DMD) to create dynamic photomasks for crosslinking geometrically specific poly-(ethylene glycol) (PEG) hydrogels, induced through UV initiated free radical polymerization. The resulting "2.5D" structures provide a constrained 3D environment for neural growth. We employ a dual-hydrogel approach, where PEG serves as a cell-restrictive region supplying structure to an otherwise shapeless but cell-permissive self-assembling gel made from either Puramatrix or agarose. The process is a quick simple one step fabrication which is highly reproducible and easily adapted for use with conventional cell culture methods and substrates. Whole tissue explants, such as embryonic dorsal root ganglia (DRG), can be incorporated into the dual hydrogel constructs for experimental assays such as neurite outgrowth. Additionally, dissociated cells can be encapsulated in the photocrosslinkable or self polymerizing hydrogel, or selectively adhered to the permeable support membrane using cell-restrictive photopatterning. Using the DMD, we created hydrogel constructs up to ~1mm thick, but thin film (<200 μm) PEG structures were limited by oxygen quenching of the free radical polymerization reaction. We subsequently developed a technique utilizing a layer of oil above the polymerization liquid which allowed thin PEG structure polymerization. In this protocol, we describe the expeditious creation of 3D hydrogel systems for production of microfabricated neural cell and tissue cultures. The dual hydrogel constructs demonstrated herein represent versatile in vitro models that may prove useful for studies in neuroscience involving cell survival, migration, and/or neurite growth and guidance. Moreover, as the protocol can work for many types of hydrogels and cells, the potential applications are both varied and vast.

A noise-reduction GWAS analysis implicates altered regulation of neurite outgrowth and guidance in autism.

BackgroundGenome-wide Association Studies (GWAS) have proved invaluable for the identification of disease susceptibility genes. However, the prioritization of candidate genes and regions for follow-up studies often proves difficult due to false-positive associations caused by statistical noise and multiple-testing. In order to address this issue, we propose the novel GWAS noise reduction (GWAS-NR) method as a way to increase the power to detect true associations in GWAS, particularly in complex diseases such as autism.MethodsGWAS-NR utilizes a linear filter to identify genomic regions demonstrating correlation among association signals in multiple datasets. We used computer simulations to assess the ability of GWAS-NR to detect association against the commonly used joint analysis and Fisher's methods. Furthermore, we applied GWAS-NR to a family-based autism GWAS of 597 families and a second existing autism GWAS of 696 families from the Autism Genetic Resource Exchange (AGRE) to arrive at a compendium of autism candidate genes. These genes were manually annotated and classified by a literature review and functional grouping in order to reveal biological pathways which might contribute to autism aetiology.ResultsComputer simulations indicate that GWAS-NR achieves a significantly higher classification rate for true positive association signals than either the joint analysis or Fisher's methods and that it can also achieve this when there is imperfect marker overlap across datasets or when the closest disease-related polymorphism is not directly typed. In two autism datasets, GWAS-NR analysis resulted in 1535 significant linkage disequilibrium (LD) blocks overlapping 431 unique reference sequencing (RefSeq) genes. Moreover, we identified the nearest RefSeq gene to the non-gene overlapping LD blocks, producing a final candidate set of 860 genes. Functional categorization of these implicated genes indicates that a significant proportion of them cooperate in a coherent pathway that regulates the directional protrusion of axons and dendrites to their appropriate synaptic targets.ConclusionsAs statistical noise is likely to particularly affect studies of complex disorders, where genetic heterogeneity or interaction between genes may confound the ability to detect association, GWAS-NR offers a powerful method for prioritizing regions for follow-up studies. Applying this method to autism datasets, GWAS-NR analysis indicates that a large subset of genes involved in the outgrowth and guidance of axons and dendrites is implicated in the aetiology of autism.

A high-throughput microfluidic assay to study neurite response to growth factor gradients

Studying neurite guidance by diffusible or substrate bound gradients is challenging with current techniques. In this study, we present the design, fabrication and utility of a microfluidic device to study neurite guidance under chemogradients. Experimental and computational studies demonstrated the establishment of a steep gradient of guidance cue within 30 min and stable for up to 48 h. The gradient was found to be insensitive to external perturbations such as media change and movement of device. The effects of netrin-1 (0.1-10 µg mL(-1)) and brain pulp (0.1 µL mL(-1)) were evaluated for their chemoattractive potential on neurite turning, while slit-2 (62.5 or 250 ng mL(-1)) was studied for its chemorepellant properties. Hippocampal or dorsal root ganglion (DRG) neurons were seeded into a micro-channel and packed onto the surface of a 3D collagen gel. Neurites grew into the matrix in three dimensions, and a gradient of guidance cue was created orthogonal to the direction of neurite growth to impact guidance. The average turning angle of each neurite was measured and averaged across multiple devices cultured under similar conditions to quantify the effect of guidance cue gradient. Significant positive turning towards gradient was measured in the presence of brain pulp and netrin-1 (1 µg mL(-1)), relative to control cultures which received no external guidance cue (p < 0.001). Netrin-1 released from transfected fibroblasts had the most positive turning effect of all the chemoattractive cues tested (p < 0.001). Slit-2 exhibited strong chemorepellant characteristics on both hippocampal and DRG neurite guidance at 250 ng mL(-1) concentration. Slit-2 also showed similar behavior on DRG neuron invasion into 3D collagen gel (p < 0.01 relative to control cultures). Taken together, the results suggest the utility of this microfluidic device to generate stable chemogradients for studying neurobiology, cell migration and proliferation, matrix remodeling and co-cultures with other cell lines, with potential applications in cancer biology, tissue engineering and regenerative medicine.

Mechanisms and promotion of 3D neurite bridging between PHBV microspheres in a microsphere–hydrogel hybrid scaffold

Poly(3-hydroxybutyrate-co-3-hydroxyvalerate) microspheres have been previously found to support the proliferation and differentiation of a variety of neuronal cells; however, to establish functional neural networks and tissue integration, the cells on the microspheres have to be connected. It was found that neurites bridged the microspheres but these connections were fragile. Thus, the neurons on PHBV microspheres (neuron–microspheres) were encapsulated in a laminin–collagen hydrogel to promote and protect the bridging formations. Bridges were found across the continuous surface between microspheres in contact (surface bridges), and in the gel space between microspheres (suspended bridges). This neuron–microsphere–hydrogel construct increased the proportion of bridge-forming neurites by 31% as compared to neuron–microspheres alone. Furthermore, the neuron–microsphere–hydrogel was found to increase the proportion of suspended bridges by 3.5 times. The surface bridges were subsequently verified to form from neurites extending across continuous surfaces, and thus packing microspheres closer to generate more continuous surfaces increased surface bridging by 70%. However, seeding cells into the gel space did not increase the proportion of suspended bridges but this still increased the overall proportion of bridges by 21%. Images of neurites in the gel space suggested that suspended bridges could have formed instead from neurites extending out of microsphere surfaces into the gel space. This is the first study to focus on neurite bridging and microspheres as scaffolds supported by hydrogel. Furthermore, a novel neurite guidance cue was found in the form of continuous surfaces.

Vacuum soft lithography to direct neuronal polarization

The ability to coat surfaces with pre-determined patterns of biomolecules by soft lithography has found use in areas ranging from fundamental biology to translational medicine, such as tissue engineering and diagnostics. However, existing surface patterning techniques (e.g., microcontact printing and traditional lithography) are unable to pattern several biomolecules in a single step. Here we introduce a simple method to simultaneously pattern multiple biomolecules in complex two-dimensional configurations onto substrates with better than 2 µm resolution. This protocol, termed vacuum soft lithography, utilized below ambient pressures temporarily stored within a removable microfluidic template to expose specific regions of a substrate to multiple biochemical solutions. We demonstrate the utility of this vacuum soft lithography technique by fabricating a multi-component array that directs the adhesion, polarization, and neurite guidance of primary hippocampal neurons.