Growth Mechanism Research Articles

Comparative study of sodium and potassium compounds as promoters for growth of monolayer MoS2 with high crystal quality on SiO2/Si substrate

Monolayer MoS2 is promising candidate for fabrication of optoelectronic devices due to its direct bandgap nature and high carrier mobility. Alkali metal compounds have been demonstrated to be helpful promoters for the growth of large single crystal monolayer MoS2 on SiO2/Si substrate. However, the catalytic mechanism of alkali metal compounds is still under debate. Herein, we compared the surface morphology, optical properties, and electrical properties of monolayer MoS2 flakes grown on SiO2/Si substrate assisted by promoters containing potassium or sodium cations and halogen (chlorine) or non-halogen (hydroxide) anions, i.e. NaCl, NaOH, KCl and KOH. Based on the analysis of existing growth mechanism, we proposed that the alkali metal cation, plays a dominant role in promoting the lateral growth of monolayer MoS2 and obtaining high crystal quality. Furthermore, potassium has a greater promoting effect than sodium. By optimizing growth conditions, monolayer triangular MoS2 flakes with large lateral size over 160 μm were grown assisted by KCl promoter. Raman and PL spectra verified excellent crystal quality of the flakes, with typical electron mobilities of 2.98 and 20 cm2 V−1 s−1 for the back-gated filed effect transistors fabricated on as-grown and fresh SiO2/Si substrates, respectively.

Site-Selective Synthesis of Bilayer Graphene on Cu Substrates Using Titanium as a Carbon Diffusion Barrier.

Chemical vapor deposition (CVD) is a widely used method for graphene synthesis, but it struggles to produce large-area uniform bilayer graphene (BLG). This study introduces a novel approach to meet the demands of large-scale integrated circuit applications, challenging the conventional reliance on uniform BLG over extensive areas. We developed a unique method involving the direct growth of bilayer graphene arrays (BLGA) on Cu foil substrates using patterned titanium (Ti) as a diffusion barrier. The use of the Ti layer can effectively control carbon atom diffusion through the Cu foil without altering the growth conditions or compromising the graphene quality, thereby showcasing its versatility. The approach allows for targeted BLG growth and achieved a yield of 100% for a 10 × 10 BLG units array. Then a 10 × 10 BLG memristor array was fabricated, and a yield of 96% was achieved. The performances of these devices show good uniformity, evidenced by the set voltages concentrated around 4 V, and a high resistance state (HRS) to low resistance state (LRS) ratio predominantly around 107, reflecting the spatial uniformity of the prepared BLGA. This study provides insight into the BLG growth mechanism and opens new possibilities for BLG-based electronics.

Microstructure, mechanical properties and interfacial features of graphene oxide reinforced 7075 composites fabricated by ultrasonic assisted casting

Graphene oxide reinforced 7075 (GO/7075) composites were successfully prepared via ultrasonic assisted casting. In this study, the microstructure, mechanical properties and interfacial structure of GO/7075 composites with varying GO contents were investigated. The experimental results showed that GO could refine grain size and produce many dislocations at the GO/Al interface, and was well bonded with Al matrix. Meanwhile, a few rod-like Al4C3 phases were observed at the active prism planes of GO in the composite. When the content of GO reached 1.0 wt%, the optimal mechanical properties of GO/7075 composites were obtained. The yield strength and ultimate tensile strength of 1.0 wt% GO/7075 composites were 212.3 MPa and 285.6 MPa, which were 61.8 % and 41.1 % higher than those of 7075 alloy, respectively. The thermal mismatch strengthening and load transfer strengthening were the main strengthening mechanisms. Moreover, in order to control the interfacial reaction between GO and Al matrix, the thermodynamic/kinetic condition and growth mechanism for the formation of Al4C3 were analyzed in details.

Growth mechanism of high-aspect ratio zirconia whisker by molten salt method

Growth mechanism of high-aspect ratio zirconia whisker by molten salt method

Efficient eco-friendly synthesis of carbon nanotubes over graphite nanosheets from yellow corn: a one-step green approach

The present work reports the synthesis of multi-wall carbon nanotubes (MWCNTs) over graphite nanosheets by an easy and simple approach without using any external catalyst. Simply, yellow corn seeds were thermally annealed in a hydrogen atmosphere at 1050 °C for 3 h without any pretreatments. Notably, the growth of MWCNTs was observed to preferentially occur on the outer surface of the corn shell. This uncomplicated approach not only emphasizes the feasibility of synthesizing carbon nanomaterials using agricultural by-products but also underscores the potential applications of these synthesized materials in various fields. Samples were examined through a comprehensive analysis employing various techniques, including scanning electron microscopy (SEM), Raman spectroscopy, FTIR, X-ray diffraction (XRD), and high-resolution transmission electron microscopy (HRTEM). The findings unveiled the formation of rolled graphene accompanied by the presence of vertical multi-wall carbon nanotubes (MWCNTs) positioned over stacked graphene sheets. This detailed characterization provides insights into the structural features and arrangement of the synthesized materials, paving the way for a deeper understanding of their potential applications. The pyrolysis temperature is a crucial factor in the morphological characteristics of the synthesized carbon nanostructures. While graphene cage-like structures were obtained at 800 °C, small carbon nanotubes were grafted to larger ones and formed three-dimensional hierarchical morphologies when the annealing temperature increased to 900 °C. The growth mechanism of the carbon nanotubes was explained based on the jet self-extrusion of the generated gases through the inherent pores of the corn seeds. The current technique employed in manufacturing MWCNTs shows significant promise as a green synthesis method for producing catalyst-free MWCNTs suitable for industrial applications including sensors and energy storage materials.

Multi‐Interfacial Heterostructure Design of Carbon Fiber/Silicone Rubber‐Oriented Composites for Microwave Absorption and Thermal Management

AbstractIn order to ensure the operation and longevity of electronic devices, the design of multifunctional composites integrating microwave absorption (MA) and thermal conduction has become the key to solving the problem. However, the superior MA properties and thermal conductivity are usually incompatible in the blend system. In this study, a modified carbon fiber/silicone rubber‐oriented structure is designed based on the multiscale design concept of heterostructures with multiple interfaces. The forward deposition‐reverse growth mechanism is utilized at the microscopic level to construct multi‐interfacial heterogeneous structures on the surface of 1D carbon fibers (CFs). The magneto‐electric coupling network of the multi‐interfacial heterostructure induces interfacial polarization and enhances MA properties and heat transfer. Subsequently, the structural design of the modified CFs is carried out on a macroscopic scale using the ice template method. The directionally aligned modified CFs/silicone rubber aerogel composites are obtained by backfilling with silicone rubber (SR). The samples achieved an effective absorption bandwidth of 4.41 GHz and a maximum reflection loss of −42.29 dB with ultra‐thin thickness (1.3 mm). The thermal conductivity of the sample is improved to 200% compared to pure silicone rubber. The composites with directional alignment have promising applications in lightweight and flexible electronic packaging.

Superselective Angiography of Vasa Vasorum Within Partially Thrombosed Vertebral Aneurysm: A Case Report.

Partially thrombosed vertebral artery aneurysms (PTVAs) are rare, most of which are not easy to treat. Furthermore, endovascular treatment of PTVAs may not have favorable outcomes. The relationship between PTVAs and well-developed vasa vasorum (VV), including the mechanism of aneurysm growth, has been reported, but there are no reports of imaging findings by digital subtraction angiography (DSA). In this case, we successfully performed superselective angiography of well-developed VV and evaluated its imaging characteristics. We present the first DSA report of a well-developed VV of PTVA. A 54-year-old patient presented with a PTVA that exerted a mass effect on the medulla oblongata. The aneurysm had no cavity due to thrombosis. The 3-dimensional DSA images indicated VV. Superselective angiography of the VV indicated staining of the thrombosed aneurysm and draining into the suboccipital cavernous sinus through the venous VV. Thus, VV embolization with n-butyl cyanoacrylate was performed. After 3 months, the contrast effect of the aneurysm on contrast-enhanced magnetic resonance imaging disappeared and aneurysm shrinkage was observed. We successfully identified a VV within PTVA. Superselective VV angiography showed staining of the thrombosed component and venous return draining into the suboccipital cavernous sinus. In this case, the embolization of the VV proved to be an effective endovascular treatment of PTVA, but the safety of this method is a challenge. Further case studies are required to validate this method, and we hope it will evolve into a new treatment of PTVA.

Magnetic Tunability via Control of Crystallinity and Size in Polycrystalline Iron Oxide Nanoparticles.

Iron oxide nanoparticles (IONPs) arewidely used for biomedical applications due to their unique magnetic properties and biocompatibility. However, the controlled synthesis of IONPs with tunable particle sizes and crystallite/grain sizes to achieve desired magnetic functionalitiesacross single-domain and multi-domain size ranges remains an important challenge. Here, a facile synthetic method is used to produceiron oxide nanospheres (IONSs) with controllable size and crystallinity for magnetic tunability. First, highly crystalline Fe3O4 IONSs (crystallite sizes above 24nm) having an averagediameter of 50 to 400nm are synthesized with enhanced ferrimagnetic properties. The magnetic properties of these highly crystalline IONSs are comparable to those of their nanocube counterparts, whichtypically possess superior magnetic properties. Second, the crystallite size can be widely tuned from 37 to 10nm while maintaining the overall particle diameter, thereby allowing precise manipulation from the ferrimagnetic to the superparamagnetic state. In addition, demonstrations of reaction scale-up and the proposed growth mechanism of the IONSs are presented. This study highlights the pivotal role of crystal size in controlling the magnetic properties of IONSs and offers a viable means to produce IONSs with magnetic properties desirable for wider applications in sensors, electronics, energy, environmental remediation, and biomedicine.

Real-Time Observation for MoS2 Growth Kinetics and Mechanism Promoted by the Na Droplet.

While the molten salt-catalyzed chemical vapor deposition (CVD) technique is recognized for its effectiveness in producing large-area transition metal chalcogenides, understanding their growth mechanisms involving alkali metals remains a challenge. Here, we investigate the kinetics and mechanism of sodium-catalyzed molybdenum disulfide (MoS2) growth and etching through image analysis conducted using an integrated CVD microscope. Sodium droplets, agglomerated via the thermal decomposition of the sodium cholate dispersant, catalyze the precipitation of supersaturated MoS2 laminates and induce growth despite fragmentation during this process. Triangular MoS2 crystals display a distinct self-exhausting exponential behavior and slow growth of thermodynamically favorable crystallographic faces, exhibiting a sulfur-dominant pressure. The growth and etching processes are facilitated by the scooting of sodium droplets along grain edges, displaying comparable rates. Leveraging these kinetics makes it possible to engineer atypical MoS2 shapes. This combined microscope not only enhances the understanding of growth mechanisms but also contributes to the facile development of next-generation nanomaterials.

Comprehensive Analysis of Placental DNA Methylation Changes and Fetal Birth Weight in Pigs

Birth weight is a complex multifactorial trait relevant to health states and disease risks in later life. The placenta is essential for proper fetal growth and facilitates gas, nutrient, and waste exchange between the mother and developing fetus. How changes in placental DNA methylation affect fetal birth weight remains to be fully elucidated. In this study, we used whole-genome bisulfite sequencing and RNA sequencing to reveal a global map of DNA methylation and gene expression changes between the placentas of highest birth weight and lowest birth weight piglets in the same litters. The transcriptome analysis identified 1682 differential expressed genes and revealed key transcriptional properties in distinct placentas. We also identified key transcription factors that may drive the differences in DNA methylome patterns between placentas. The decrease in DNA methylation level in the promoter was associated with the transcriptional activation of genes associated with angiogenesis, extracellular matrix remodeling, and transmembrane transport. Our results revealed the regulatory role of DNA methylation in gene transcription activity leading to the differences in placental morphological structures and birth weights of piglets. These results could provide novel clues to clarify the underlying regulatory mechanisms of placental development and fetal growth.

Application of CuNPs and AMF alleviates arsenic stress by encompassing reduced arsenic uptake through metabolomics and ionomics alterations in Elymus sibiricus

Recent studies have exhibited a very promising role of copper nanoparticles (CuNPs) in mitigation of abiotic stresses in plants. Arbuscular mycorrhizae fungi (AMF) assisted plants to trigger their defense mechanism against abiotic stresses. Arsenic (As) is a non-essential and injurious heavy-metal contaminant. Current research work was designed to elucidate role of CuNPs (100, 200 and 300 mM) and a commercial inoculum of Glomus species (Clonex® Root Maximizer) either alone or in combination (CuNPs + Clonex) on physiology, growth, and stress alleviation mechanisms of E. sibiricus growing in As spiked soils (0, 50, and 100 mg Kg− 1 soil). Arsenic induced oxidative stress, enhanced biosynthesis of hydrogen peroxide, lipid peroxidation and methylglyoxal (MG) in E. sibiricus. Moreover, As-phytotoxicity reduced photosynthetic activities and growth of plants. Results showed that individual and combined treatments, CuNPs (100 mM) as well as soil inoculation of AMF significantly enhanced root growth and shoot growth by declining As content in root tissues and shoot tissues in As polluted soils. E. sibiricus plants treated with CuNPs (100 mM) and/or AMF alleviated As induced phytotoxicity through upregulating the activity of antioxidative enzymes such as catalase (CAT) and superoxide dismutase (SOD) besides the biosynthesis of non-enzymatic antioxidants including phytochelatin (PC) and glutathione (GSH). In brief, supplementation of CuNPs (100 mM) alone or in combination with AMF reduced As uptake and alleviated the As-phytotoxicity in E. sibiricus by inducing stress tolerance mechanism resulting in the improvement of the plant growth parameters.

Striated muscle: an inadequate soil for cancers.

Many organs of the body are susceptible to cancer development. However, striated muscles-which include skeletal and cardiac muscles-are rarely the sites of primary cancers. Most deaths from cancer arise due to complications associated with the development of secondary metastatic tumours, for which there are few effective therapies. However, as with primary cancers, the establishment of metastatic tumours in striated muscle accounts for a disproportionately small fraction of secondary tumours, relative to the proportion of body composition. Examining why primary and metastatic cancers are comparatively rare in striated muscle presents an opportunity to better understand mechanisms that can influence cancer cell biology. To gain insights into the incidence and distribution of muscle metastases, this review presents a definitive summary of the 210 case studies of metastasis in muscle published since 2010. To examine why metastases rarely form in muscles, this review considers the mechanisms currently proposed to render muscle an inhospitable environment for cancers. The "seed and soil" hypothesis proposes that tissues' differences in susceptibility to metastatic colonization are due to differing host microenvironments that promote or suppress metastatic growth to varying degrees. As such, the "soil" within muscle may not be conducive to cancer growth. Gaining a greater understanding of the mechanisms that underpin the resistance of muscles to cancer may provide new insights into mechanisms of tumour growth and progression, and offer opportunities to leverage insights into the development of interventions with the potential to inhibit metastasis in susceptible tissues.

Cysteine-Induced Chirality Evolution of Molybdenum Disulfide Nanodots from a Bottom-Up Strategy.

The transfer of chirality from molecules to synthesized nanomaterials has recently attracted significant attention. Although most studies have focused on graphene and plasmonic metal nanostructures, layered transition metal dichalcogenides (TMDs), particularly MoS2, have recently garnered considerable attention due to their semiconducting and electrocatalytic characteristics. Herein, we report a new approach for the synthesis of chiral molybdenum sulfide nanomaterials based on a bottom-up synthesis method in the presence of chiral cysteine enantiomers. In the synthesis process, molybdenum trioxide and sodium hydrosulfide serve as molybdenum and sulfur sources, respectively. In addition, ascorbic acid acts as a reducing agent, resulting in the formation of zero-dimensional MoS2 nanodots. Moreover, the addition of cysteine enantiomers to the growth solutions contributes to the chirality evolution of the MoS2 nanostructures. The chirality is attributed to the cysteine enantiomer-induced preferential folding of the MoS2 planes. The growth mechanism and chiral structure of the nanomaterials are confirmed through a series of characterization techniques. This work combines chirality with the bottom-up synthesis of MoS2 nanodots, thereby expanding the synthetic methods for chiral nanomaterials. This simple synthesis approach provides new insights for the construction of other chiral TMD nanomaterials with emerging structures and properties. More significantly, the as-formed MoS2 nanodots exhibited highly defect-rich structures and chiroptical performance, thereby inspiring a high potential for emerging optical and electronic applications.

Ankrd1 inhibits the FAK/Rho-GTPase/F-actin pathway by downregulating ITGA6 transcriptional to regulate myoblast functions.

Skeletal muscle constitutes the largest percentage of tissue in the animal body and plays a pivotal role in the development of normal life activities in the organism. However, the regulation mechanism of skeletal muscle growth and development remains largely unclear. This study investigated the effects of Ankrd1 on the proliferation and differentiation of C2C12 myoblasts. Here, we identified Ankrd1 as a potential regulator of muscle cell development, and found that Ankrd1 knockdown resulted in the proliferation ability decrease but the differentiation level increase of C2C12 cells. Gene Ontology and Kyoto Encyclopedia of Genes and Genomes pathway enrichment analyzes as well as RNA-seq results showed that Ankrd1 knockdown activated focal adhesion kinase (FAK)/F-actin signal pathway with most genes significantly enriched in this pathway upregulated. The integrin subunit Itga6 promoter activity is increased when Ankrd1 knockdown, as demonstrated by a dual-luciferase reporter assay. This study revealed the molecular mechanism by which Ankrd1 knockdown enhanced FAK phosphorylation activity through the alteration of integrin subunit levels, thus activating FAK/Rho-GTPase/F-actin signal pathway, eventually promoting myoblast differentiation. Our data suggested that Ankrd1 might serve as a potential regulator of muscle cell development. Our findings provide new insights into skeletal muscle growth and development and valuable references for further study of human muscle-related diseases.

Dynamic Changes of Phytohormone Concentrations during <i>Prunella vulgaris</i> L. Development and Impact of Rosmarinic Acid Accumulation through Exogenous ABA Application

Background: Plant hormones not only participate in regulating the growth and development process of plants, but also play an important regulatory role in the synthesis of secondary metabolites. Prunella vulgaris L. (P. vulgaris) is a perennial herb that has a long history for use as a kind of medicinal and edible plant. In order to understand the relationship between plant hormones and Prunella vulgaris L. (P. vulgaris) development. Methods: The quantification of indoleacetic acid (IAA), salicylic acid (SA), jasmonates (JAs), abscisic acid (ABA), 1-aminocyclopropane-1-carboxylic acid (ACC) and cytokinins (CKs) of P. vulgaris during development was performed by a liquid chromatography-mass spectrometry (LC-MS). Furthermore, the effect of exogenous ABA on rosmarinic acid (RA) accumulation was verified. Results: Nuts formation was related to the concentrations of IAA, ABA and ACC in the green-fruit stage, and IAA and ABA levels increased rapidly in this stage. High IAA concentrations can promote an increase in ACC. SA, JAs, ethylene (ET) and ABA were related to the defence response of plants to pathogens. SA concentrations increased sharply after the turning stage, while the concentration of JAs, which are antagonistic to SA, was low. The decrease in ABA concentration after this period may be related to the antagonistic effect of IAA or SA. The CKs trans-zeatin (tZ) and trans-zeatin riboside (tZR) promoted the growth and development of early P. vulgaris, and their concentrations decreased in the late period, leading to withering and senescence of P. vulgaris. The CKs cis-zeatin (cZ) and N6-(2-isopentenyl) adenine (iP) were presumed to be present in nuts. After elicitation with 10 μg/mL ABA, an increase of RA content was observed (p < 0.05). Conclusion: This study can provide an improved basis for elucidating the growth and development mechanism of P. vulgaris in the future, as well as a better understand of the effects of ABA application on RA accumulations.

Hybrid mechanism of electrical breakdown in ferroelectric materials under high-pressure shock loading

The unique ability of ferroelectrics to generate high voltage under shock loading is limited by electrical breakdown within the shock-compressed ferroelectric material. Breakdown is a hybrid process of initiation and growth. The possible mechanisms of electrical breakdown in ferroelectric films and bulk ceramics subjected to high-pressure shock loading are discussed and experiments designed to elucidate which mechanisms govern breakdown. Gigapascal shock loading experiments were performed on poled Pb0.99(Zr0.95Ti0.05)0.98Nb0.02O3 ferroelectric film specimens in the range of 32–156 μm thickness to determine the dependence of the breakdown field on thickness and on film specimens in the range of 4–16 mm length to determine the dependence of the breakdown field on the duration of shock compression. The resulting breakdown-field vs thickness and breakdown-field vs shock transit time dependencies are consistent with a hybrid electron emission initiation and Joule heating microchannel growth mechanism. Further analysis of data previously obtained on shock-compressed 0.27Pb(In1/2Nb1/2)O3–0.47Pb(Mg1/3Nb2/3)O3–0.26PbTiO3 ferrvoelectric single crystals and Pb(Zr0.65Ti0.35)O3, Pb0.99(Zr0.52Ti0.48)0.99Nb0.01O3, Pb0.99(Zr0.95Ti0.05)0.98Nb0.02O3 bulk ceramics is consistent with this dual mechanism. It appears that neither chemical composition nor microstructure (single crystal vs polycrystalline) of the ferroelectric material has a significant effect on the breakdown mechanism in shocked ferroelectrics.

Wet Chemical Synthesis of AlxGa1−xAs Nanostructures: Investigation of Properties and Growth Mechanisms

This study focuses on the wet chemical synthesis of AlxGa1−xAs nanostructures, highlighting how different deposition conditions affect the film morphology and material properties. Electrochemical etching was used to texture GaAs substrates, enhancing mechanical adhesion and chemical bonding. Various deposition regimes, including voltage switching, gradual voltage increase, and pulsed voltage, were applied to explore their impact on the film growth mechanisms. SEM analysis revealed distinct morphologies, EDX confirmed variations in aluminum content, Raman spectroscopy detected structural disorders, and XRD analysis demonstrated peak position shifts. The findings emphasize the versatility and cost-effectiveness of wet electrochemical methods for fabricating high-quality AlxGa1−xAs films with tailored properties, showing potential for optoelectronic devices, high-efficiency solar cells, and other advanced semiconductor applications.

Two-dimensional bilayer ice in coexistence with three-dimensional ice without confinement

Icing plays an important role in various physical-chemical process. Although the formation of two-dimensional ice requires nanoscale confinement, two-dimensional bilayer ice in coexistence with three-dimensional ice without confinement remains poorly understood. Here, a critical value of a surface energy parameter is identified to characterize the liquid-solid interface interaction, above which two-dimensional and three-dimensional coexisting ice can surprisingly form on the surface. The two-dimensional ice growth mechanisms could be revealed by capturing the growth and merged of the metastable edge structures. The phase diagram about temperature and pressure vs energy parameters is predicted to distinguish liquid water, two-dimensional ice and three-dimensional ice. Furthermore, the deicing characteristics of coexisting ice demonstrate that the ice adhesion strength is linearly related to the ratio of ice-surface interaction energy to ice temperature. In addition, for gas-solid phase transition, the phase diagram about temperature and energy parameters is predicted to distinguish gas, liquid water, two-dimensional ice and three-dimensional ice. This work gives a perspective for studying the singular structure and dynamics of ice in nanoscale and provides a guide for future experimental realization of the coexisting ice.

Two-dimensional bilayer ice in coexistence with three-dimensional ice without confinement

Icing plays an important role in various physical-chemical process. Although the formation of two-dimensional ice requires nanoscale confinement, two-dimensional bilayer ice in coexistence with three-dimensional ice without confinement remains poorly understood. Here, a critical value of a surface energy parameter is identified to characterize the liquid-solid interface interaction, above which two-dimensional and three-dimensional coexisting ice can surprisingly form on the surface. The two-dimensional ice growth mechanisms could be revealed by capturing the growth and merged of the metastable edge structures. The phase diagram about temperature and pressure vs energy parameters is predicted to distinguish liquid water, two-dimensional ice and three-dimensional ice. Furthermore, the deicing characteristics of coexisting ice demonstrate that the ice adhesion strength is linearly related to the ratio of ice-surface interaction energy to ice temperature. In addition, for gas-solid phase transition, the phase diagram about temperature and energy parameters is predicted to distinguish gas, liquid water, two-dimensional ice and three-dimensional ice. This work gives a perspective for studying the singular structure and dynamics of ice in nanoscale and provides a guide for future experimental realization of the coexisting ice.

Wet Chemical Synthesis of AlxGa1−xAs Nanostructures: Investigation of Properties and Growth Mechanisms

This study focuses on the wet chemical synthesis of AlxGa1−xAs nanostructures, highlighting how different deposition conditions affect the film morphology and material properties. Electrochemical etching was used to texture GaAs substrates, enhancing mechanical adhesion and chemical bonding. Various deposition regimes, including voltage switching, gradual voltage increase, and pulsed voltage, were applied to explore their impact on the film growth mechanisms. SEM analysis revealed distinct morphologies, EDX confirmed variations in aluminum content, Raman spectroscopy detected structural disorders, and XRD analysis demonstrated peak position shifts. The findings emphasize the versatility and cost-effectiveness of wet electrochemical methods for fabricating high-quality AlxGa1−xAs films with tailored properties, showing potential for optoelectronic devices, high-efficiency solar cells, and other advanced semiconductor applications.