Greater Length Research Articles

“These gipsy humanities”: G. P. R. James and the Fictionalization of Gypsies in the 1830s

Abstract Studies of the representations of Gypsies in nineteenth-century English literature generally skirt the 1820s and 1830s, even though arguments have been made that there was a significant shift in the image of the Gypsy at this time, from a romantically unknowable figure to a familiar part of the British landscape and, increasingly, an alter ego for the writer. This article fills the gap and tests the argument by examining Edward Bulwer-Lytton’s The Disowned (1828) and, at greater length, G. P. R. James’s The Gipsy (1835). Both writers use the plot devices available to them as romance novelists to create characters who mediate between Gypsies and non-Gypsies and function as spokesmen for Gypsy ways. It is these characters who idealize Gypsy life, yet their idealizations are ironized and psychologized in such a way that the objectivity of their views is in doubt. As characters, they powerfully anticipate the Victorian notion of the “Romany rye”—the non-Gypsy who lives with Gypsies for extended periods, adopting their lifestyle. Yet before that particular literary construction emerged, Bulwer-Lytton and James were putting pressure on the assumptions behind it, questioning the idea that Gypsy culture was open to meaningful appropriation and highlighting the near impossibility of truly mediating Gypsy experience to non-Gypsy readers.

Comparison of Growth and Composition of Black Soldier Fly (Hermetia illucens L.) Larvae Reared on Sugarcane By-Products and Other Substrates.

Black soldier fly larvae (BSFL) can convert organic waste into high-quality biomass. In this study, we tested the potential of sugarcane by-products as a food source for BSFL and compared larval development and nutritional value with some other organic substrates. Seven different substrates were used, including carrot pomace (C), carrot pomace and leftover bread (CB) (50/50), bagasse and vinasse (BV), bagasse and molasses (BM), bagasse, vinasse, and molasses (BVM), a mixture of all the above treatments (MX), and university canteen leftovers (UCLs). The larval weight and length were measured for two weeks from day 5 to 19. Then, the BSFL were harvested and analyzed for dry matter, crude protein, oil, ash, mineral, and fatty acid composition. Larval weight and length varied depending on the feeding substrate provided. University canteen leftovers resulted in the BSFL having at least 18% greater length (17.00 mm) and 56% greater weight (3.15 g) compared to other treatments. The highest amounts of protein (38.9%) and oil (39.06%) were observed in the UCL treatment, while the BV treatment larvae had the highest quantities of ash (28.9%) and dry matter (28.0%). The fatty acid profile of the BSFL revealed three-times-higher levels of saturated fatty acids than unsaturated fatty acids in the UCL treatment and was at least twice as high in other treatments. Overall, the BSFL had the best growth on the UCL substrate, and the combination of bagasse and vinasse (BV) was the most appropriate substrate for BSFL development among the sugarcane by-products.

Field strength prediction of 220 kV cable oil terminal defects based on multivariate nonlinear regression model

During the installation of a cable oil terminal, it is easy to leave scratches on the main insulation owing to uneven forces when removing the semi-conductive layer. Scratch defects cause field intensity distortion, which leads to partial discharge and insulation failure. This study attempts to establish a simulation model of a 220 kV cable terminal to determine the effect of the length, depth, and position of the scratch on the maximum field strength at the defect. The simulation and experiment demonstrate that the maximum field strength at the defect increases with greater length and decreases as the depth increases. Therefore, a prediction method for the terminal defect field strength based on a multivariate nonlinear regression model was proposed in this study. When the defect is located at 20 mm from the root of the stress cone, the maximum field strength is 14.5 MV/m when the length and depth are 2 mm and 1 mm, respectively. The maximum field strength at the defect was predicted based on the length, depth, and position of the scratch defect to evaluate the severity of the defect.

GCMe: Efficient Implementation of the Gaussian Core Model with Smeared Electrostatic Interactions for Molecular Dynamics Simulations of Soft Matter Systems.

In recent years, molecular dynamics (MD) simulations have emerged as an essential tool for understanding the structure, dynamics, and phase behavior of charged soft matter systems. To explore phenomena across greater length and time scales in MD simulations, molecules are often coarse-grained for better computational performance. However, commonly used force fields represent particles as hard-core interaction centers with point charges, which often overemphasizes the packing effect and short-range electrostatics, especially in systems with bulky deformable organic molecules and systems with strong coarse-graining. This underscores the need for an efficient soft-core model to physically capture the effective interactions between coarse-grained particles. To this end, we implement a soft-core model uniting the Gaussian core model with smeared electrostatic interactions that is phenomenologically equivalent to recent theoretical models. We first parametrize it generically using water as the model solvent. Then, we benchmark its performance in the OpenMM toolkit for different boundary conditions to highlight a computational speedup of up to 34 × compared to commonly used force fields and existing implementations. Finally, we demonstrate its utility by investigating how boundary polarizability affects the adsorption behavior of a polyelectrolyte solution on perfectly conducting and nonmetal boundaries.

A Blueprint of IR Evaluation Integrating Task and User Characteristics

Traditional search result evaluation metrics in information retrieval, such as MAP and NDCG, naively focus on topical relevance between a document and search topic and assume this relationship as mono-dimensional and often binary. They neglect document content overlap and assume gains piling up as the searcher examines the ranked list at greater length. We propose a novel search result evaluation framework based on multidimensional, graded relevance assessments, explicit modelling of document overlaps and attributes affecting document usability beyond relevance. Document relevance to a search task is seen to consist of several content themes and document usability attributes. Documents may also overlap regarding their content themes. Attributes such as document readability, trustworthiness, or language represent the entire document’s usability in the search task context, for a given searcher and her motivating task. The proposed framework evaluates the quality of a ranked search result, taking into account the contribution of each successive document, with estimated overlap across themes, and usability based on its attributes.

Explicit n-particle harmonic oscillator states in products of SU(1,1) representations

In this paper, we present a simple algorithm for the explicit construction of [Formula: see text]-particle harmonic oscillator states simultaneously belonging to irreducible representations of [Formula: see text] (or [Formula: see text]) and [Formula: see text]. For degenerate representations, the construction can be done using generating functions or hyperspherical harmonics. The cases with [Formula: see text] and [Formula: see text] are investigated at greater length. The analysis is extended to nondegenerate states, although the states are not so easily obtained as in the degenerate case. Finally, we briefly touch on the [Formula: see text] structure of Bell states.

Growth and body composition of infants born moderate-to-late preterm fed a protein- and mineral-enriched postdischarge formula compared with a standard term formula until 6 months corrected age, a randomized controlled trial

BackgroundInfants born moderate-to-late preterm (i.e., 32 wk–35 wk 6 d gestation) are, analogous to those born very preterm, at risk of later obesity, hypertension, and diabetes. Appropriate early life nutrition is key for ensuring optimal growth and body composition, thereby mitigating potential cardiometabolic risks. ObjectivesWe aimed to compare growth and body composition between infants born moderate-to-late preterm fed isocaloric but protein- and mineral-enriched postdischarge formula (PDF) or standard term formula (STF) until 6 mo corrected age (CA; i.e., after term equivalent age [TEA]). MethodsAfter enrollment (≤7 d postpartum), infants received PDF if (fortified) mother’s own milk (MOM) was insufficient. At TEA, those receiving >25% of intake as formula were randomized to either continue the same PDF (n = 47) or switch to STF (n = 50); those receiving ≥75% of intake as MOM (n = 60) served as references. At TEA and 6 mo CA, we assessed anthropometry and body composition using both dual-energy x-ray absorptiometry (DXA) and air displacement plethysmography (ADP). ResultsFeeding groups had similar gestational age (median [25th percentile;75th percentile]: 34.3 [33.5; 35.1] wk), birthweight (mean ± standard deviation [SD]: 2175 ± 412 g), anthropometry, and body composition at TEA. At 6 mo CA, infants fed PDF had slightly, but significantly, greater length (67.6 ± 2.5 and 66.9 ± 2.6 cm, P < 0.05) and larger head circumference (43.9 ± 1.3 and 43.4 ± 1.5 cm, P < 0.05) compared to infants fed STF. Also, infants fed PDF had higher lean mass (LM) and bone mineral content estimated by DXA (4772 ± 675 and 4502 ± 741 g; 140 ± 20 and 131 ± 23 g, respectively; P < 0.05). ADP estimates, however, were not statistically different between feeding groups. ConclusionsInfants born moderate-to-late preterm demonstrated modest increases in length, head circumference, LM, and bone mineral content when fed PDF compared to STF for 6 mo after TEA.This trial was registered at the International Clinical Trial Registry Platform as NTR5117 and NTR NL4979.

LIFE HISTORY PARAMETERS OF MELON FRUIT FLY, BACTROCERA CUCURBITAE (COQUILLETT) (DIPTERA: TEPHRITIDAE) ON FOUR ECONOMICALLY IMPORTANT VEGETABLES

The majority of plant species that are used for consumption and medicinal purposes belongs to Cucurbitaceae. These vegetables are attacked by several insect pests including Tephritid flies. Keeping in view, four economically important cucurbit vegetables such as sponge gourd; Luffa aegyptiaca, bitter gourd; Momordica charantia, musk melon; Cucumis melo, and bottle gourd; Lagenaria siceraria were selected to investigate the life-history parameters of Bactrocera cucurbitae (Coq.) (Diptera: Tephritidae) under laboratory conditions. For this purpose, B. cucurbitae was reared in the laboratory on each host vegetable and egg hatchability %, egg incubation period, larval survival (%), duration (days), length and width of larvae, pupal parameters, male-female ratio, and age-specific fecundity were recorded. The results showedno statistical difference in hatchability percentages, larval duration, and pupal survival (%) in all tested vegetables. However, greater length and width of larvae were recorded when the B. cucurbitae larvae were provided with bottle gourd. Moreover, maximum pupal recovery was recorded in bottle and sponge gourd among all the tested vegetables. Maximum females were also recorded in bottle gourd. Adult longevity and fecundity were significantly affected by the host. Maximum female longevity (52 days) was recorded when B. cucurbitae were provided with bottle gourd and minimum (41 days) on sponge gourd. Similarly, maximum fecundity (823 eggs) was also recorded when maggots were fed on bottle gourd and the lowest (611 eggs) on a sponge gourd. In conclusion, Bottle gourd is the most preferable and nutritious host among all the tested vegetables and needs effective management strategies for B. cucurbitae. The output of the present studies would be helpful for the development of an effective integrated pest management (IPM) program for B. cucurbitae in a variety of vegetables.

Association of chronic kidney disease and end-stage renal disease with procedural complications and inpatient outcomes of leadless pacemaker implantations across the United States

Leadless pacemakers have emerged as a promising alternative to transvenous pacemakers in patients with kidney disease. However, studies investigating leadless pacemaker outcomes and complications based on kidney dysfunction are limited. The objective of this study was to evaluate the association of chronic kidney disease (CKD) and end-stage renal disease (ESRD) with inpatient complications and outcomes of leadless pacemaker implantations. National Inpatient Sample and International Classification of Diseases, Tenth Revision codes were used to identify patients with CKD and ESRD who underwent leadless pacemaker implantations in the United States from 2016 to 2020. Study end points assessed included inpatient complications, outcomes, and resource utilization of leadless pacemaker implantations. A total of 29,005 leadless pacemaker placements were identified. Patients with CKD (n = 5245 [18.1%]) and ESRD (n=3790 [13.1%]) were younger than patients without CKD and had higher prevalence of important comorbidities. In crude analysis, ESRD was associated with higher prevalence of major complications, peripheral vascular complications, and inpatient mortality. After multivariable adjustment, CKD and ESRD were associated with inpatient mortality (CKD: adjusted odds ratio [aOR], 1.62 [95% CI, 1.40-1.86]; ESRD: aOR, 1.38 [95% CI, 1.18-1.63]) and prolonged length of stay (CKD: aOR, 1.55 [95%CI, 1.46-1.66]; ESRD: aOR, 1.81 [95% CI 1.67-1.96]). ESRD was also associated with higher hospitalization costs (aOR, 1.63; 95% CI, 1.50-1.77) and major complications (aOR, 1.33; 95% CI, 1.13-1.57) after leadless pacemaker implantation. Approximately one-third of patients undergoing leadless pacemaker implantation had CKD or ESRD. CKD and ESRD were associated with greater length and cost of stay and inpatient mortality.

Sustainable dry forest management for cattle ranching: The effects of deschampado practices on the shrub layer and the light environment in comparison to roller chopping

The Chaco region, faces land cover changes due to agricultural and cattle ranching intensification. Silvopastoral practices employ roller chopping, in which the shrub layer is completely removed. Disturbance triggers vegetation successional processes and promotes shrub recolonization. Roller chopping only removes aerial organs, so some species resprout, which can modify their architecture. Searching for sustainable alternatives, participative approaches introduced “deschampado”, which involves a low-intensity intervention, and sowing shade-tolerant fodder grasses. The study aims to compare roller chopping and deschampado, regarding the changes in cover, composition and architecture of the shrub layer, and the variations in the light environment produced by them. We hypothesized that deschampado causes a minimal disturbance, thus maintaining shrub layer characteristics and a light environment similar to unmanaged forests.The study was conducted in the Semiarid Chaco Pilot Site (Salta, Argentina). Two sites were selected: Puesto el Quirquincho (roller chopping), and Puesto La China (deschampado). The both sites included control forest and managed areas. We defined six plots of 250 m2 per site. Vegetation cover, shrub layer composition and shrub architecture were assessed. The light environment was characterized using hemispheric photographs. We also measured production of M. maximus in deschampado.Roller-chopped plots showed increased bare soil (8.92%) and reduced shrub (56.74%) and tree cover (13.2%). Deschampado plots maintained near-100% shrub cover, 35.5% tree cover and lacked bare soil. Herbaceous cover was higher in both treatments (∼70%) compared to controls. In the shrub layer, Salta triflora and Sarcotoxicum salicifolium relative abundance decreased, Castela coccinea disappeared and Parkinsonia praecox appeared in roller-chopped plots. Shrubs from roller chopping had a greater number of stems, were shorter, had a smaller crown diameter (50%), and a greater length (50%) and number (5-fold) of thorns than their control, while those from the deschampado were more similar to their control. Roller chopping increased transmitted radiation in 57% and canopy opening in 50%, and reduced leaf area index; while deschampado maintained transmitted radiation similar to unmanaged forests.The disturbance produced by roller chopping facilitates shrub recolonization, with changes in composition and architecture of shrub layer. In contrast, deschampado, as it implies a low disturbance, maintains shrub layer and light conditions similar to unmanaged forests. The study highlights the ecological consequences of these practices, emphasizing the potential of deschampado as a more sustainable alternative for maintaining forest structure and ecosystem services while allowing fodder production in dry forests.

MORPHO-YIELD RESPONSE AND QUALITY CHARACTERIZATION OF BOTTLE GOURD (LAGENARIA SICERARIA) VARIETIES TO NITROGEN FERTILIZATION

The morpho-yield and quality traits of bottle gourd varieties were tested in response to nitrogen (N) nutrition during the year 2020 at the horticulture research area of Sindh Agriculture University Tandojam. The study was performed by applying Randomized complete block design (RCBD) with three replications. The two varieties Anmol and Long green were tested by applying six N rates that included (0 Kg N, (control), 50, 75 ,100, 125 and 150 Kg N ha-1). Both the varieties exhibited positive response to nitrogen fertilization. The maximum vine length, branches vine-1 were noted in plants, fertilized with increasing N rates (150 and 125 kg ha-1). In contrast shorter plants with less branches were noted when they were not fertilized with N nutrition.). The N nutrition also had a positive effect on fruit traits. The maximum fruit number with greater length and weight was recorded in plants supplied with increasing N fertilization. The N fertilization had beneficial influence on plant quality characteristics. The maximum pH, TSS, moisture and ash content in plants were observed, nourished with increasing N supply. The varietal comparison indicates that fruits of "Long green" had lower pH (5.88 vs. 6.0), higher in TSS (5.39 vs. 4.28%), moisture (67.74 vs. 55.52%), ash contents (19.96 vs. 19.01%), fruit yield (18178 vs. 17123 kg ha-1) than variety “Anmol”. In general, vines fertilized at 150 kg ha-1 N performed better than those fertilized at lower N levels for entire studied attributes, and "Long green" did better than "Anmol" among the evaluated varieties. The data clearly indicated severe soil N deficiency; and with each increment in applied N, the crop response was positive and significant (p&lt;0.05). Hence, the farmers are suggested that “Long Green” bottle gourd variety may preferably be adapted with N at 150 kg ha-1 due to intense performance under agro-ecological conditions of Tandojam Sindh, Pakistan

Facial Analysis of Patients with Unilateral or Bilateral Cleft Lip and Palate Using 3D Stereophotogrammetry.

To evaluate the quantitative values of linear and angular facial anthropometrics in patients with unilateral cleft lip and palate (UCLP) and compare them with those of patients with bilateral cleft lip and palate (BCLP) using three-dimensional (3D) facial imaging. Retrospective, observational, and cross-sectional study. Hospital for Rehabilitation of Craniofacial Anomalies/USP (HRAC/USP). In total, 61 non-syndromic patients with CLP who underwent multidisciplinary treatment and rehabilitated with a prosthesis were enrolled and divided into those with UCLP (G1; n = 31) and those with BCLP (G2; n = 30). Facial images were captured using a 3D camera after landmarks were marked on each patient's face. The software evaluated linear and angular parameters. Statistical tests were applied. Significance was determined as P < 0.05. Overall, 22 linear and 13 angular measurements were evaluated. The nasal length (P = 0.08), middle third of the face (P = 0.06), base nose width (P < 0.001), nasal root width (P < 0.001), nasal tip angle (P = 0.018), philtrum width (P < 0.001), lower face width (P = 0.039) and midfacial depth (P = 0.040) were significantly higher in G2; the upper cutaneous lip height was significantly higher in G1. Sexual dimorphism was observed except for linear measurements (linear distance between the labiale superius and labiale inferius landmarks, nasal root width, and upper cutaneous lip length) and angular measurements. G2 had a greater length and width of nose and nasal root, nasal tip angle, philtrum width, and lower face width, midfacial depth, and midface third than G1. These findings also revealed the presence of sexual dimorphism.

Transferability of Temperature Evolution of Dissimilar Wire-Arc Additively Manufactured Components by Machine Learning.

Wire-arc additive manufacturing (WAAM) is a promising industrial production technique. Without optimization, inherent temperature gradients can cause powerful residual stresses and microstructural defects. There is therefore a need for data-driven methods allowing real-time process optimization for WAAM. This study focuses on machine learning (ML)-based prediction of temperature history for WAAM-produced aluminum bars with different geometries and process parameters, including bar length, number of deposition layers, and heat source movement speed. Finite element (FE) simulations are used to provide training and prediction data. The ML models are based on a simple multilayer perceptron (MLP) and performed well during baseline training and testing, giving a testing mean absolute percentage error (MAPE) of less than 0.7% with an 80/20 train-test split, with low variation in model performance. When using the trained models to predict results from FE simulations with greater length or number of layers, the MAPE increased to an average of 3.22% or less, with greater variability. In the cases of greatest difference, some models still returned a MAPE of less than 1%. For different scanning speeds, the performance was worse, with some outlier models giving a MAPE of up to 14.91%. This study demonstrates the transferability of temperature history for WAAM with a simple MLP approach.

Innovative arrangement of circular angled fins for maximizing the discharge performance of triple-tube heat storage systems

Abstract This study introduces a novel triple-tube latent heat storage system enhanced with circular angled fins to improve solidification and heat recovery performance. The fins are arranged in staggered pattern with alternating upward and downward orientations on both sides of the PCM shell. A validated numerical model was developed using the enthalpy method to simulate the intricate heat transfer and phase change physics. Effects of circular fins geometry and operating conditions were systematically quantified on discharge rates and temperature uniformity. Four fin dimension cases (thickness × length): (2 × 5), (1 × 10), (0.66 × 15), and (0.57 × 17.5) mm2 were analyzed. The results demonstrate that fins with greater length and reduced thickness exhibit superior performance due to enhanced heat transfer capabilities, resulting in quicker solidification and faster heat retrieval. The longest 17.5-mm fins, achieving full solidification in 1973 s with 44%, 19%, and 1.9% quicker than cases with 5-mm, 10-mm, and 15-mm long fins, respectively. Incorporating an additional fin upward further reduces the solidification time by 4.5% while improving heat recovery by 3.6%. The 17.5-mm long fins increase heat discharge by 48% and outlet heat-transfer fluid temperatures by 39% versus straight fin baselines. Lower inlet heat-transfer fluid temperatures (10°C vs 20°C) reduce PCM solidification times by 31% (1755s vs 2554s) while increasing heat recovery rates by 57% (56.3 W vs 35.8 W). Overall, the integrated angled fins create a customizable latent heat storage system with greatly intensified heat transfer and thermal performance compared to conventional shell-and-tube arrangements.

Outcrossing Rate and Fruit Yield of Hass Avocado Trees Decline at Increasing Distance from a Polliniser Cultivar

Optimal fruit production from many tree crops relies on the transfer of cross-pollen between trees of different cultivars rather than the transfer of self-pollen between trees of the same cultivar. However, many orchards are established with wide blocks of single cultivars, which can result in high percentages of self-fertilised fruit and sub-optimal yield and quality. We aimed to determine whether outcrossing rates and yield of Hass avocado fruit decline with increasing distance from polliniser trees of cultivar Shepard and whether selfed fruit are smaller than outcrossed fruit. Outcrossing rates declined from 49% at six trees (40 m) from a block of Shepard trees to 30% at thirty trees (160 m) from a block of Shepard trees. Tree yield across this distance declined by 44% as a result of a 69% decline in the number of outcrossed fruit per tree, without a significant decline in the number of selfed fruit per tree. Outcrossed Hass fruit were 12% heavier than selfed Hass fruit, with 3% greater diameter and 5% greater length. The study results demonstrate the importance of interplanting Type B avocado pollinisers closely with Type A Hass trees to increase fruit yield and size.

The influence of the field orientation on the representativeness of the positional dynamics in soccer small-sided games

The aim of this study was to compare the positional dynamics in soccer small-sided games (SSGs) with either greater length (SSGlength) or width (SSGwidth) with official games. Twenty four Brazilian U-20 national-level players participated in six SSGs training sessions with two different SSG configurations: SSGlength (4v4, 40 m length and 26 m width) and SSGwidth (4v4, 26 m length and 40 m width). Positional dynamics variables were monitored and compared to official games. Linear mixed regression model was fitted using the situations as fixed effect, and, when appropriate, player and/or group as random effects. When compared to SSGlength and SSGwidth, official games showed a greater Relative Team Length, LPWratio, Spacial Exploration Index (SEI), and Strech Index, with a large or very large effect size. The SSGlength elicited higher values of Relative Team Width, LPWratio, and SEI when compared to SSGwidth. No significant differences were found between SSGlength and SSGwidth for Relative Team Length (small effect size), and SI (small effect size). Both group and player as random effects showed low variances. We concluded that the tactical behaviours during the 4v4 SSG differed substantially from the competitive tactical behaviour during the official games. In addition, changing the orientation of the playing field did not make the positional dynamics of the SSGs more similar to the official games.

Flexible Actuators Based on Conductive Polymer Ionogels and Their Electromechanical Modeling.

High-performance flexible actuators, integral components of soft robotics, hold promise for advancing applications in safe human-robot interactions, healthcare, and various other fields. Notable among these actuators are flexible electrochemical systems, recognized for their merits in low-voltage manipulation, rapid response speed, and cost-effectiveness. However, the optimization of output strain, response speed, and stability presents a significant challenge in this domain. Despite the application of diverse electrochemically active materials to enhance actuation performance, a critical need persists for corresponding electrical-mechanical models to comprehensively grasp actuation mechanisms. In this study, we introduce a novel electrochemical actuator that utilizes conductive polymer ionogel as active electrodes. This ionogel exhibits exceptional properties, including high conductivity, flexibility, and electrochemical activity. Our electrochemical actuators exhibit noteworthy bending strain capabilities and rapid response rates, achieving frequencies up to 10 Hz at a modest voltage of 1 V. An analytical model integrating ion migration and dynamic processes has been established to elucidate actuator behavior. Simulation results highlight that electrodes characterized by low resistance and high capacitance are optimal for simultaneous enhancement of bending strain and blocking force. However, the augmentation of Young's modulus, while increasing blocking force, compromises bending strain. Furthermore, a larger aspect ratio proves beneficial for unidirectional stress output, leading to increased bending strain, while actuator blocking force diminishes with greater length. These findings underscore the intricate interplay between material properties and dimensions in optimizing the performance of flexible electrochemical actuators. This work provides important practical and theoretical guidance for the manufacture of high-performance flexible actuators and the search for new smart materials.

Grihastha Ashrama And The Kamasutra

The Kamasutra is an ancient text guiding the sensual and sexual life of men and women in society. The text authored by Mallinga Vatsyayana is a work of art describing the variety of human sexual conduct and its pursuit from the time the person is in the Grihastha ashrama or the householder’s stage of existence. This included men, women and the third gender. The Grihastha stage begins from the time studentship stage of Brahmacharya Ashrama ends and the person enters the stage of a householder where the person begins a professional career, acquires sources of income, gets married and begets children. The main protagonist of the Kamasutra, the “nagaraka” after acquiring education, sets up a lifestyle for himself, follows duties, participates in festivities, attends social gatherings, etc. The nagaraka also has a set of social skills and etiquettes to follow; maintain a wardrobe full of various attires for each function and makes efforts to maintain personal grooming; hosting and entertaining family, friends, lovers, courtesans and acquaintances, conduct business trade and maintain networking in social circles as well as indulge in cultural pursuits. Women had to focus on grooming, acquiring skills, maintaining the household and balancing between various relationships. But nowhere has Vatsyayana focused on mentioning stages of life where one procreates or prepares for Vanaprastha Ashrama or Sanyasa Ashrama or pursuit of Moksha or liberation. These aspects of the life of a commoner need to be explored at greater lengths in the academic arena for a holistic study on the great monumental work of Vatsyayana as Kamasutra is only seen as a work on sexual positions and portrayals. The current study proposes to explore various facets of the Grihastha life spelled out explicitly and implicitly by the author and aspects missed or avoided by him in the greater good of life. As we spend a large part of our life as householders, the views expressed by Vatsyayana hold good and true in these contemporary times as well which needs to be investigated exhaustively.

Theopsych: A Psychological Science Primer for Theologians

Theopsych: A Psychological Science Primer for Theologians

Sediment Resuspension Distribution Modelling Using a Ship Handling Simulation along with the MIKE 3 Application

The environmental effects of ship propellers were not even close to fully examined before the current massive ships were introduced to sea trade. Larger ships, result in greater length, beam, draft and propulsion power. Of concern here is the under-keel clearance (UKC) and applied power, the most important parameters causing sea bottom sediment resuspension and, consequently, the transport and deposition of washed sediments. The problems are multifarious: shorelines could be contaminated with heavy metals, petroleum hydrocarbons and other organic chemicals, which are sometimes buried deep in the sediment bed. The effects of resuspension on marine life have been well documented by marine biologists. Further, a ship passing through a flow field may have a significant hydrodynamic effect on the shipping channel: waves generated by moving vessels can accelerate shoreline erosion; erosion around quay piles have a negative impact on sea flora. Waves can also affect other manoeuvring vessels or ships at berth. Available empirical models are applicable for a steady state condition, addressing velocity and, consequently, shears at the sea bottom for defined UKC and states of applied power. The idea here is to calculate material resuspension dynamically in the water column based on realistic manoeuvring conditions, which can be a matter of some complexity. During a manoeuvre, the pilot must bring the ship into or out of the harbour in the safest possible way, operating the telegraph, rudder, thrusters and possibly tugs, and also co-ordinating the work of the linesmen. The jet speed powering the vessel is not only a function of the speed of the propeller, but also of the present speed of the ship, which has an effect on the propeller’s constantly changing torque. Additionally, the bathymetry is constantly changing, and the streamlines hit not only the seabed, but also the bank and other structures of the harbour basin. The resuspended material remains in the column long after the ship has finished manoeuvring, moving slowly through the entire water column and being transported not only by the remaining streamlines of the ship but also by general currents. Realistic manoeuvring parameters can be obtained from real-time simulations with a real crew using state-of-the-art Full Mission Bridge Simulators (FMBS); eddies and the like contribute to the distribution and material resuspension and can be calculated by applying numerical modelling. In this paper, a container ship departure manoeuvre is simulated dynamically using Wartsila FMBS obtained data, which are postprocessed and coupled with the MIKE 3 FM hydrodynamic modelling application to which we add the precise port of Koper bathymetry to gain ship propeller spatial jet velocity distribution in specific time domains. Obtained jet velocity distribution is further coupled with the MIKE 3 MT particle tracking application to visualize total resuspended sediment transport patterns, etc. Container ships were selected to amplify the urgency of this phenomenon; they are the most intrusive in terms of resuspending and scouring the seabed given their powerful engines and larger propellers. Passenger ships could have been used, car carriers, or even tankers; but the fear among scientists is that the issue will not be taken seriously enough by certain stakeholders.