Grasshopper Optimization Algorithm Research Articles

Suspended sediment load prediction using sparrow search algorithm-based support vector machine model

Prediction of suspended sediment load (SSL) in streams is significant in hydrological modeling and water resources engineering. Development of a consistent and accurate sediment prediction model is highly necessary due to its difficulty and complexity in practice because sediment transportation is vastly non-linear and is governed by several variables like rainfall, strength of flow, and sediment supply. Artificial intelligence (AI) approaches have become prevalent in water resource engineering to solve multifaceted problems like sediment load modelling. The present work proposes a robust model incorporating support vector machine with a novel sparrow search algorithm (SVM-SSA) to compute SSL in Tilga, Jenapur, Jaraikela and Gomlai stations in Brahmani river basin, Odisha State, India. Five different scenarios are considered for model development. Performance assessment of developed model is analyzed on basis of mean absolute error (MAE), root mean squared error (RMSE), determination coefficient (R2), and Nash–Sutcliffe efficiency (ENS). The outcomes of SVM-SSA model are compared with three hybrid models, namely SVM-BOA (Butterfly optimization algorithm), SVM-GOA (Grasshopper optimization algorithm), SVM-BA (Bat algorithm), and benchmark SVM model. The findings revealed that SVM-SSA model successfully estimates SSL with high accuracy for scenario V with sediment (3-month lag) and discharge (current time-step and 3-month lag) as input than other alternatives with RMSE = 15.5287, MAE = 15.3926, and ENS = 0.96481. The conventional SVM model performed the worst in SSL prediction. Findings of this investigation tend to claim suitability of employed approach to model SSL in rivers precisely and reliably. The prediction model guarantees the precision of the forecasted outcomes while significantly decreasing the computing time expenditure, and the precision satisfies the demands of realistic engineering applications.

Thermodynamic and Economic Optimization of Plate-Fin Heat Exchangers Using the Grasshopper Optimization Algorithm

Thermodynamic and Economic Optimization of Plate-Fin Heat Exchangers Using the Grasshopper Optimization Algorithm

Enhancing healthcare IoT systems for diabetic patient monitoring: Integration of Harris Hawks and grasshopper optimization algorithms.

The integration of the Internet of Things (IoT) in healthcare, especially for people with diabetes, allows for constant health monitoring. This means that doctors can watch over patients' health more closely, making sure they catch any issues early on. With this technology, healthcare workers can be more accurate and effective when keeping an eye on how patients are doing. This not only helps in keeping track of patients' health in real-time but also makes the whole process more reliable and efficient.By implementing appropriate routing techniques, the transmission of diabetic patients' data to medical centers will facilitate real-time and timely responses from healthcare professionals. The grasshopper optimization algorithm is employed in the proposed approach to cluster network nodes, resulting in the formation of a network tree that facilitates the establishment of connections between the cluster head and the base station. After identifying the cluster head and establishing the clusters, the second stage of routing is implemented by employing the Harris Hawks optimization algorithm. This algorithm ensures that the data pertaining to diabetic patients is transmitted to the treatment centers and hospitals with minimal delay. For node routing, the optimal next step is selected based on the parameters such as the residual energy of the node, the ratio of delivered data packages, and the number of the neighbors of the node. To continue, first, the MATLAB software is utilized to simulate the proposed method, and then, it is compared with other similar methods. This comparison is conducted based on various parameters, including delay, energy consumption, network throughput, and network lifespan. Compared to other methods, the proposed method demonstrates a significant 33% improvement in the average point-to-point delay parameter in the subsequent iterations or rounds.

Enhancing Solar Power Forecasting using Grasshopper optimization and Whale Optimization Algorithm

Solar power forecasting is essential for effectively integrating solar energy into the power system. Accurate forecasting allows for more effective power system planning, operation, and management. In this research work, we employed the Grasshopper Optimization Algorithm (GOA) and Whale Optimization Algorithm (WOA) to choose features for solar power forecasting utilizing time series data from the OPSD dataset. The dataset contains measurements taken at 15-minute intervals, giving a wealth of data for training and verifying forecasting algorithms. The WOA is used to adjust the parameters of a forecasting model, hence increasing its accuracy and reliability. The suggested approach's performance is evaluated on a large-scale dataset, with training, validation, and test sets of 100,000, 50,000, and 51,347 data points, respectively. The results show that the WOA is effective at improving solar power forecasting accuracy, which contributes to the efficient use of renewable energy resources.

Techno-economic modeling and optimal sizing of autonomous hybrid microgrid renewable energy system for rural electrification sustainability using HOMER and grasshopper optimization algorithm

This research paper focuses on techno-economic modeling and optimal sizing of autonomous hybrid microgrid systems. The optimal configuration of the suggested stand-alone system was performed by developing a size optimization model based on the metaheuristic novel Grasshopper Optimization algorithm (GOA) method to minimize the Total Net Present Cost (TNPC), unmet load, and Cost of Energy (COE) in the Nsukka Community which comprises 88 villages. The GOA and HOMER Pro Software are employed to compare results across four possible configurations of hybrid renewable power systems (HRES). The comparative analysis between GOA and HOMER shows that configuration-4 (biogas/Diesel), emerges as the optimal solution, with a 0 % unmet load at the COE of $0.01783 per kWh. The findings indicated that the GOA-based HRES, with a higher saturation of Biogas and photovoltaics (PV), proves to be more affordable in comparison to the HOMER-based solutions. The reduction in the COE and NPC of renewable energy for peak demands highlights the growing importance of biogas generators as an affordable local power supply to meet energy demands. This underscores the potential of the GOA in optimizing hybrid renewable energy systems for remote communities, producing an economically viable and sustainable energy solution.

Image Segmentation Based on G.O.A for Finding Deformities in Medical and Aura Images

Objectives: The research aims to develop the segmentation model to identify the deformity in the medical images as accurately as possible and plan for better medical treatment. The study is extended to identify the disease before its appearance in the human body through human aura images to support aura imaging in medical diagnosis. Methods: The study used a brain image from the UCI data set and Aura images from the Biowell data set to identify the disease. The segmentation model Bivariate Gaussian Mixture Model (B.G.M.M) was developed. Model parameters are derived using the Expectation Maximization (E.M) Algorithm. The Grasshopper optimization Algorithm (G.O.A) extracts optimal features from the images. The chosen feature is fed as input to the classification model B.G.M.M. Segmentation accuracy is measured using the quality metrics. Findings: The developed approach shows 97% accuracy in identifying the damaged tissues in MRI images and high-intensity energy zones in the aura images, indicating the potential for deformities. Novelty: This study significantly contributes to the field by offering novel solutions for precise and comprehensive image analysis in medical and aura imaging contexts. Keywords: G.O.A, segmentation, G.M.M, E.M, quality metrics, deformity identification, Hue and saturation

Optimization of off-grid hybrid renewable energy systems for cost-effective and reliable power supply in Gaita Selassie Ethiopia

This paper explores scenarios for powering rural areas in Gaita Selassie with renewable energy plants, aiming to reduce system costs by optimizing component numbers to meet energy demands. Various scenarios, such as combining solar photovoltaic (PV) with pumped hydro-energy storage (PHES), utilizing wind energy with PHES, and integrating a hybrid system of PV, wind, and PHES, have been evaluated based on diverse criteria, encompassing financial aspects and reliability. To achieve the results, meta-heuristics such as the Multiobjective Gray wolf optimization algorithm (MOGWO) and Multiobjective Grasshopper optimization algorithm (MOGOA) were applied using MATLAB software. Moreover, optimal component sizing has been investigated utilizing real-time assessment data and meteorological data from Gaita Sillasie, Ethiopia. Metaheuristic optimization techniques were employed to pinpoint the most favorable loss of power supply probability (LPSP) with the least cost of energy (COE) and total life cycle cost (TLCC) for the hybrid system, all while meeting operational requirements in various scenarios. The Multi-Objective Grey Wolf Optimization (MOGWO) technique outperformed the Multi-Objective Grasshopper Optimization Algorithm (MOGOA) in optimizing the problem, as suggested by the results. Furthermore, based on MOGWO findings, the hybrid solar PV-Wind-PHES system demonstrated the lowest COE (0.126€/kWh) and TLCC (€6,897,300), along with optimal satisfaction of the village's energy demand and LPSP value. In the PV-Wind-PHSS scenario, the TLCC and COE are 38%, 18%, 2%, and 1.5% lower than those for the Wind-PHS and PV-PHSS scenarios at LPSP 0%, according to MOGWO results. Overall, this research contributes valuable insights into the design and implementation of sustainable energy solutions for remote communities, paving the way for enhanced energy access and environmental sustainability.

Statistical pathways to low-carbon cities: Analyzing renewable integration, energy-efficient design, and job creation

To address the existing gap in understanding the intricate dynamics of resource management in Cloud Fog Computing (CFC)-driven Smart Grids (SG), this study introduces an innovative adaptive framework integrating Genetic Optimization Algorithm (GOA) and Cuckoo Search Optimization Algorithm (CSOA), aiming to optimize response times and enhance overall efficiency. In the domain of contemporary energy grids, the implementation of intelligent grids (IG) has ushered in a new era of dependable, streamlined, eco-friendly, and economically viable electric services. These grids constitute a fundamental facet of present-day energy resources. Moreover, the advent of cloud and mist computing (CMC) provides on-demand access to computational resources. Overcoming associated challenges, CMC not only delivers advantages like cost-effectiveness, energy conservation, scalability, flexibility, and adaptability but also presents an innovative model for resource management in IG. This study introduces a CMC-driven strategy for managing resources in IG by digitally replicating key grid components. The proposed framework aims to furnish diverse computational services for resource management within IG through a hierarchical arrangement of CMCs. Additionally, this investigation scrutinizes and simulates two optimization approaches: the cuckoo search and grasshopper optimization algorithms. These algorithms operate on an adaptive machine learning mechanism designed to balance the load, and the study meticulously compares their efficacy. These algorithms operate on an adaptive machine learning mechanism designed to balance the load, and the study meticulously compares their efficacy in the context of Renewable Integration, Energy-Efficient Design, and Job Creation.

A Review On Early Detection Of Chronic Kidney Disease

Early detection of Chronic Kidney Disease (CKD) is critical for timely intervention and effective treatment. Deep learning algorithms have demonstrated promise in medical applications, including disease detection. In this study, we propose a deep learning-based system for early CKD detection using the Chronic Kidney Disease dataset from Kaggle. Additionally, we incorporate the Grasshopper Optimization Algorithm (GOA) for feature selection to enhance the system's performance and interpretability. Our system employs a convolutional neural network (CNN) architecture to analyze clinical and laboratory attributes from the CKD dataset, obtained from Kaggle, consisting of 4,000 instances with 25 attributes. These attributes encompass patient demographics, blood tests, and medical history, providing a comprehensive representation of CKD-related factors. To improve the system's performance, we integrate the GOA for feature selection. The GOA is a nature-inspired metaheuristic optimization algorithm that mimics the foraging behavior of grasshoppers. It aims to identify the most relevant attributes associated with CKD from the dataset. By selecting a subset of informative features, we enhance the model's predictive accuracy and reduce overfitting. During the training phase, the CNN learns to automatically extract relevant features and patterns associated with CKD from the selected attributes. Additionally, data preprocessing techniques such as normalization and feature scaling are applied to further improve the model's performance and generalizability. To evaluate the system's performance, we conduct experiments using a separate test dataset comprising 1,000 instances from the CKD dataset. The incorporation of the GOA for feature selection in our deep learning system not only improves its performance but also enhances interpretability. By identifying the most relevant attributes associated with CKD, we focus on key biomarkers and risk factors, enhancing the system's accuracy and providing valuable insights into the disease. Our research showcases the potential of deep learning algorithms, coupled with GOA-based feature selection, for early CKD detection. By leveraging the Kaggle CKD dataset and incorporating the GOA, we contribute to improving the accuracy and applicability of the system in real-world clinical settings. To handle Big data we are proposing to implement this problem on Pyspark one of the Big data computational environments for effective learning. In this platform, we can dynamically scale the infrastructure as per the demand of the data. Ultimately, our work aims to advance the early detection and management of CKD, leading to improved patient outcomes and more effective healthcare interventions.

Efficient customer behaviour prediction in Indian metropolitan cities for E‐commerce applications

AbstractThe primary objective of this manuscript is to find the service quality factors, which influence customer satisfaction, promotional efforts taken by the retailer, and the perception of customers towards the organized retail sector. This investigation uses both offline and online retail sales datasets. Particularly, in the case of the offline retail sale dataset, an energy‐efficient analysis is conducted to collect scalable, accurate, and real‐time data. The collected data is used in enhancing several aspects of e‐commerce operations, including customer experience optimization and inventory management, which results in better decision‐making with increased efficiency. After data collection, the outliers are eliminated by implementing the z‐score technique. The removal of outliers increases the variability of collected data which reduces statistical power. The statistically sufficient data are given to the Randomized Grasshopper Optimization Algorithm (RGOA) for optimal instance selection. Finally, the selected optimal instances are given to the deep neural network (DNN) model for future customer behaviour prediction. The efficacy of the RGOA‐DNN model is analysed by using evaluation measures like mean squared error (MSE), root mean squared error (RMSE), mean absolute error (MAE), mean percentage error (MPE) and mean absolute percentage error (MAPE). The numerical analysis states that the RGOA‐DNN model obtained a minimal error rate with MSE of 0.09 and 0.10, RMSE of 0.13 and 0.14, MAE of 0.12 and 0.16, MPE of 0.10 and 0.11 and MAPE of 0.08 and 0.10 on the offline and online retail sales datasets. The RGOA‐DNN model has a minimal error rate in future customer behaviour prediction related to the conventional regression models. Furthermore, the elimination of inactive instances or selection of optimal instances reduces the model complexity to linear and computational time to 22.10 and 23.12 s on the offline and online retail sales datasets.

Application of Dandelion Optimization Algorithm in Pattern Synthesis of Linear Antenna Arrays

This paper introduces an application of the dandelion optimization (DO) algorithm in antenna arrays. This is the first time that the DO algorithm has been used for optimizing antenna arrays. For antenna array optimization, sidelobe level (SLL) and deep nulls are key technical indicators. A lower SLL can improve the signal-to-noise ratio and reduce the impact of clutter signals outside the main beam. Deep nulls need to be aligned with the direction of interference to eliminate the influence of interference sources. The combination of the two can effectively improve the anti-interference ability of the entire system. Therefore, antenna arrays with ultra-low sidelobes and ultra-deep nulls are currently hot in the field of antenna array design and are also some of the key technologies needed to achieve modern high-performance radar systems. As a new type of evolutionary algorithm inspired by nature, the DO algorithm is inspired by the wind propagation behavior of dandelions in nature. This algorithm iteratively updates the population from three stages of ascent, descent, and landing, ultimately finding the optimal position. It has good optimization ability in solving complex problems such as those involving nonlinearity, discreteness, and non-convexity, and the antenna array pattern synthesis optimization problem belongs to multivariate nonlinear problems. Therefore, the DO algorithm can be effectively applied in the field of antenna array optimization. In this work, we use the following method to obtain an optimized pattern of a linear array with the lowest sidelobe level (SLL), null placement in particular directions, and a lower notch in particular directions: by controlling the antenna array’s element spacing and leaving the phase unchanged to optimize the current amplitudes and by controlling the excitation current and phase fixation of the antenna array and changing the element spacing. In the first and second examples, different algorithms are used to reduce the SLL of the antenna. In the first example, the DO algorithm reduces the SLL to −33.37 dB, which is 2.67 dB, 2.67 dB, 3.77 dB, 2.74 dB, and 2.52 dB lower than five other algorithms. In the second example, the SLL optimized by the DO algorithm is −42.56 dB, which is 5.04 dB and 1.48 dB lower than two other algorithms. In both examples, the DO algorithm reduces the SLL lower than other algorithms when the main lobe of the antenna is not significantly widened. Examples 3, 4, and 5 use the DO algorithm to optimize the amplitude of the current, generating deep nulls and deep notches in specific directions. In Example 3, the DO algorithm obtains a depth of nulls equal to −187.6 dB, which is 66.7 dB and 44.3 dB lower than that of the flower pollination algorithm (FPA) and the chaotic colony predation algorithm (CCPA), respectively. In Example 4, the deep null obtained by the DO algorithm is as low as −98.69 dB, which is 6.67 dB lower than the deep null obtained by the grey wolf optimization (GWO) algorithm. In Example 5, the deep notch obtained by the DO algorithm is as low as −63.1 dB, which is 6.4 dB and 1.9 dB lower than the spider monkey optimization (SMO) algorithm and the grasshopper optimization algorithm (GOA), respectively. The data prove that the DO algorithm produces deeper nulls and notches than other algorithms. The last two examples involve reducing sidelobe levels and generating deep nulls by optimizing the spacing between elements. In Example 5, the SLL obtained using the DO algorithm is −22.8766 dB, which is 0.1998 dB lower than the lowest SLL of −22.6768 dB among other algorithms. In Example 6, the SLL obtained using the DO algorithm is −20.1012 dB, and the null depth is −125.1 dB, which is 1.592 dB lower than the SLL obtained by the cat swarm optimization (CSO) algorithm and 19.1 dB lower than the deep null obtained by the GWO algorithm, respectively. In summary, the results of six simulation experiments indicate that the DO algorithm has better optimization ability in linear array optimization than other evolutionary algorithms.

Dynamic simulation and projection of ESV changes in arid regions caused by urban growth under climate change scenarios.

Spatial simulation and projection of ecosystem services value (ESV) changes caused by urban growth are important for sustainable development in arid regions. We developed a new model of cellular automata based grasshopper optimization algorithm (named GOA-CA) for simulating urban growth patterns and assessing the impacts of urban growth on ESV changes under climate change scenarios. The results show that GOA-CA yielded overall accuracy exceeding 98%, and FOM for 2010 and 2020 were 43.2% and 38.1%, respectively, indicating the effectiveness of the model. The prairie lost the highest economic ESVs (192 million USD) and the coniferous yielded the largest economic ESV increase (292 million USD) during 2000-2020. Using climate change scenarios as urban future land use demands, we projected three scenarios of the urban growth of Urumqi for 2050 and their impacts on ESV. Our model can be easily applied to simulating urban development, analyzing its impact on ESV and projecting future scenarios in global arid regions.

A hybrid Grasshopper optimization algorithm for skin lesion segmentation and melanoma classification using deep learning

Skin cancer can be detected through visual examination and confirmed through dermoscopic analysis and various diagnostic tests. This is because visual observation enables early detection of unique skin images by artificial intelligence. Promising outcomes are shown by several Convolution Neural Network (CNN)–based skin lesion classification systems that employ tagged skin images. This study suggests a practical approach for identifying skin cancers using dermoscopy pictures, improving specialists' ability to distinguish benign from malignant tumors. The Swarm Intelligence (SI) approach used dermoscopy photographs to locate lesions on the skin areas Region of interest (ROI). The Grasshopper Optimization technique produced the best segmentation outcomes. The Speed-Up Robust Features (SURF) approach is applied to extract features based on these findings. Two groups were created using the ISIC-2017, ISIC-2018, and PH-2 databases to categorize skin tumors. With an estimated accuracy in classification of 98.52%, preciseness of 96.73%, and Matthews Correlation Coefficient (MCC) of 97.04%, the suggested classification and segmentation methodologies have been evaluated for classification efficacy, specificity, sensitivity, F-measure, preciseness, the MCC, the dice coefficient, and Jaccard's index. In every performance indicator, the method we suggest outperformed state-of-the-art methods.

Optimal Placement of Superconducting Magnetic Energy Storages in a Distribution Network with Embedded Wind Power Generation

The prevalence of distributed generation in most power grids can negatively affect their performance in terms of power loss, voltage deviation, and voltage stability. Superconducting Magnetic Energy Storages (SMESs) can help in addressing this problem as long as they are optimally placed in the distribution network. This paper presents a hybrid Grasshopper Optimization Algorithm and a Simulated Annealing (GOA-SA) method to determine the optimal placement of SMESs in a distribution network with an embedded wind power generation system. The optimization was formulated as a multi-objective problem to minimize active power losses, reactive power losses, and voltage deviation and maximize the voltage stability index. An IEEE 57-node distribution network was employed and simulations were performed using MATLAB R2020b. Based on simulations using 200 kW SMESs in discharge mode, the active power loss decreased by 82.57%, the reactive power loss decreased by 80.71%, the average voltage deviation index decreased by 66.91%, and the voltage stability index improved by 34.97%. In the charging operation mode, the active power loss increased by 24.86%, the reactive power loss increased by 8.21%, the average voltage deviation increased by 12.86%, and the voltage stability index increased by 12.79%. These results show that SMESs can improve the technical performance of a distribution network.

Experimental and meta-heuristic optimization for the highest thermo-hydraulic performance of a solar air heater with a V-notch pattern of hemispherical protrusions on absorber surfaces

Thermo-hydraulic performances of a new solar air heater with single V-notch patterns of hemispherical protrusions on the absorber plate are investigated experimentally for different relative protrusion heights (hp/Dh = 0.027–0.069), relative pitch (pp/hp = 6–14), attack angle (αap = 15°-75°), and Reynolds number (Re =3600–21,700). Three meta-heuristic algorithms, i.e., Ant colony optimization (ACO), Whale optimization algorithm (WOA), and Grass-hopper optimization algorithm (GOA), were used for single and multi-objective optimizations. Experimental results provide the maximum Nusselt number (Nu) as 127.07 at hp/Dh = 0.050, pp/hp = 10, αap = 600, and Re =21,700, whereas the minimum friction factor (f) becomes 0.0165 at hp/Dh = 0.027, pp/hp = 10, αap = 450, and Re =21,700. The highest normalized Nusselt number (Nu/Nus) is found to be 2.56 for hp/Dh = 0.050, pp/hp = 10, αap = 600, and Re =7200, and the maximum normalized friction factor (f/fs) is observed as 4.30 at hp/Dh = 0.050, pp/hp = 10, αap = 450, and Re =7200. The highest thermo-hydraulic performance parameter (THPP) was to be 1.60 at pp/hp = 10, hp/Dh = 0.050, αap = 600, and Re =7200. Empirical correlations were developed. In single objective optimization for Nu, WOA provided the best results. For f, WOA gives a minimum value. The WOA metaheuristic algorithm outperformed the other algorithms.

Brain tumor recognition by an optimized deep network utilizing ammended grasshopper optimization

Brain tumors are abnormal cell masses that can get originated in the brain spread from other organs. They can be categorized as either malignant (cancerous) or benign (noncancerous), and their growth rates and locations can impact the functioning of the nerve system. The timely detection of brain tumors is crucial for effective treatment and prognosis. In this study, a new approach has been proposed for diagnosing brain tumors using deep learning and a meta-heuristic algorithm. The method involves three main steps: (1) extracting features from brain MRI images using AlexNet, (2) reducing the complexity of AlexNet by employing an Extreme Learning Machine (ELM) network as a classification layer, and (3) fine-tuning the parameters of the ELM network using an Amended Grasshopper Optimization Algorithm (AGOA). The performance of the method has been evaluated on a publicly available dataset consisting of 20 patients with newly diagnosed glioblastoma that is compared with several state-of-the-art techniques. Experimental results demonstrate that the method achieves the highest accuracy, precision, specificity, F1-score, sensitivity, and MCC with values of 0.96, 0.94, 0.96, 0.96, 0.94, and 0.90, respectively. Furthermore, the robustness and stability of the method have been illustrated when subjected to different levels of noise and image resolutions. The proposed approach offers a rapid, accurate, and dependable diagnosis of brain tumors and holds potential for application in other medical image analysis tasks.

Solution to uncertainty of renewable energy sources and peak hour demand in smart grid system

Today's need for environmental sustainability prompted the smart grid to incorporate more renewable energy sources. Reducing the operational costs of power generation and emission dispatch can both be accomplished with the integration of renewable energy sources. A power system is made to manage the fluctuating nature of loads for a brief time, nevertheless. However, new difficulties arise for utilities as a result of the fluctuation and uncertainty associated with renewable sources. Another problem faced by generating plants is network reliability issues arising from the peak hour's power demand in the power system. Application of demand response technology with the help of smart meters connected at consumers' end in smart cities can help to ease the enormous peak-hour pressure on power generating units. But a hybrid power system integrated with a storage system faces the challenge of optimal utilization of the battery under uncertainties caused by intermittent generation of power and dynamic demand. This research work proposes a real-time price based hidden Markov model and an enhanced demand response technique to solve these issues in a hybrid power system. Proposed model is tested on IEEE 30-bus system with/without renewable energy sources and implemented grasshopper optimization algorithm for optimal scheduling of generating units.

BGOA-TVG: Binary Grasshopper Optimization Algorithm with Time-Varying Gaussian Transfer Functions for Feature Selection.

Feature selection aims to select crucial features to improve classification accuracy in machine learning and data mining. In this paper, a new binary grasshopper optimization algorithm using time-varying Gaussian transfer functions (BGOA-TVG) is proposed for feature selection. Compared with the traditional S-shaped and V-shaped transfer functions, the proposed Gaussian time-varying transfer functions have the characteristics of a fast convergence speed and a strong global search capability to convert a continuous search space to a binary one. The BGOA-TVG is tested and compared to S-shaped and V-shaped binary grasshopper optimization algorithms and five state-of-the-art swarm intelligence algorithms for feature selection. The experimental results show that the BGOA-TVG has better performance in UCI, DEAP, and EPILEPSY datasets for feature selection.

Improved Binary Meerkat Optimization Algorithm for efficient feature selection of supervised learning classification

Feature selection (FS) is a crucial step in machine learning and data mining projects. It aims to remove redundant and uncorrelated features, thus improving the accuracy of models. However, it can be challenging to select the optimal features, especially for datasets with many features. This paper proposes the Binary Meerkat Optimization Algorithm (BMOA) to address the issue of FS. The BMOA selects the most related and useful features. Additionally, an improved BMOA (IBMOA) is introduced, which enhances exploration and exploitation capabilities by incorporating the Periodic Mode Boundary Handling (PMBH) strategy and the Local Search (LS) process. This helps to reduce dimensionality and enhance classification accuracy. To evaluate the significance of selected features, two widely used classifiers, namely k-nearest Neighbor (k-NN) and Support Vector Machine (SVM), were used as quality raters. The proposed IBMOA and the original BMOA were compared on 21 multi-scale and multi-faceted benchmark datasets. The binary structures of eight contemporary algorithms, including Binary Artificial Bee Colony (BABC), Binary Grey Wolf Optimization (BGWO), Binary Sailfish Optimizer (BSFO), Binary Particle Swarm Optimizer (BPSO), Binary Bird Swarm Algorithm (BBSA), Binary Whale Optimization Algorithm (BWOA), Binary Grasshopper Optimization Algorithm (BGOA), and Binary Bat Algorithm (BBA), were also analyzed and compared. The proposed IBMOA algorithm outperforms competitors on small and large datasets, obtaining optimal solutions within a reasonable timeframe. This is true for the proposed IBMOA, which has been statistically proven to be highly competitive using the Wilcoxon rank sum test (with alpha=0.05).

Experimental study on modified GOA-MPPT for PV system under mismatch conditions

This paper presents a modified grasshopper optimization algorithm (GOA) tailored for optimizing the power extraction capability of a solar photovoltaic (PV) system. The algorithm`s focus is on addressing one of the issues associated with mismatch loss (MML), particularly the mismatch (MM) in solar irradiance conditions, to attain maximum output power. The core strategy of the GOA involves optimizing the duty cycles of the converter to achieve the maximum power point (MPP) for the PV system. The PV system configuration comprises three PV modules connected in series and a SEPIC converter. To facilitate efficient maximum power point tracking (MPPT), the paper proposes using the GOA as a controlling mechanism. The study employs a comparative approach, contrasting the performance of the proposed system against established algorithms, such as PSO and GWO. The results of these evaluations exhibit the superior performance of the proposed GOA when compared to other optimization techniques. The GOA exhibits exceptional MPPT tracking characteristics, characterized by rapid tracking speed, heightened efficiency, and minimal oscillations within the PV system. Consequently, the GOA effectively addresses one of the MML issues.